Commit graph

91 commits

Author SHA1 Message Date
Russell King
809b4e00ba Merge branch 'devel-stable' into devel 2010-10-19 22:06:36 +01:00
Russell King
f00ec48fad ARM: Allow SMP kernels to boot on UP systems
UP systems do not implement all the instructions that SMP systems have,
so in order to boot a SMP kernel on a UP system, we need to rewrite
parts of the kernel.

Do this using an 'alternatives' scheme, where the kernel code and data
is modified prior to initialization to replace the SMP instructions,
thereby rendering the problematical code ineffectual.  We use the linker
to generate a list of 32-bit word locations and their replacement values,
and run through these replacements when we detect a UP system.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-04 20:23:36 +01:00
Santosh Shilimkar
7f58217bb6 ARM: 6419/1: mmu: Fix MT_MEMORY and MT_MEMORY_NONCACHED pte flags
The commit f1a2481c0 sets up the default flags for MT_MEMORY and
MT_MEMORY_NONCACHED memory types. L_PTE_USER flag is wrongly
set as default for these entries so remove it. Also adding
the 'L_PTE_WRITE' flag so that these pages become read-write
instead of just being read-only

[this stops them being exposed to userspace, which is the main
concern here --rmk]

Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-04 19:20:18 +01:00
Santosh Shilimkar
f1a2481c0a ARM: 6407/1: mmu: Setup MT_MEMORY and MT_MEMORY_NONCACHED L1 entries
This patch populates the L1 entries for MT_MEMORY and MT_MEMORY_NONCACHED
types so that at boot-up, we can map memories outside system memory
at page level granularity

Previously the mapping was limiting to section level, which creates
unnecessary additional mapping for which physical memory may not
present. On the newer ARM with speculation, this is dangerous and can
result in untraceable aborts.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-25 15:58:39 +01:00
Catalin Marinas
d907387c42 ARM: 6383/1: Implement phys_mem_access_prot() to avoid attributes aliasing
ARMv7 onwards requires that there are no aliases to the same physical
location using different memory types (i.e. Normal vs Strongly Ordered).
Access to SO mappings when the unaligned accesses are handled in
hardware is also Unpredictable (pgprot_noncached() mappings in user
space).

The /dev/mem driver requires uncached mappings with O_SYNC. The patch
implements the phys_mem_access_prot() function which generates Strongly
Ordered memory attributes if !pfn_valid() (independent of O_SYNC) and
Normal Noncacheable (writecombine) if O_SYNC.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-19 12:19:18 +01:00
Russell King
ceb0885d3b Merge branch 'misc' into devel
Conflicts:
	arch/arm/mm/init.c
2010-07-31 14:20:02 +01:00
Russell King
8d717a52d1 ARM: Convert platform reservations to use LMB rather than bootmem
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27 08:48:23 +01:00
Russell King
2778f62056 ARM: initial LMB trial
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27 08:48:22 +01:00
Russell King
4bb2e27db1 ARM: early_pte_alloc()
Provide a common function for allocating early PTE tables.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27 08:47:59 +01:00
Linus Walleij
cb9d7707cd ARM: 6222/1: add memory types for the TCMs
The earlier TCM memory regions were mapped as MT_MEMORY_UNCACHED
which doesn't really work on platforms supporting the new v6
features like the NX bit. Add unique MT_MEMORY_[I|D]TCM types
instead.

Cc: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-18 20:29:47 +01:00
Russell King
3abe9d33b3 ARM: early_alloc()
Add a common early allocator function, in preparation for switching
over to LMB.  When we do, this function will need to do a little more
than just allocating memory; we need it zero initialized too.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-16 11:06:42 +01:00
Russell King
98c672cf1f ARM: Move platform memory reservations out of generic code
Move the platform specific bootmem memory reservations out of
arch/arm/mm/mmu.c into their respective platform files.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-16 11:06:40 +01:00
Russell King
be37030274 ARM: Remove DISCONTIGMEM support
Everything should now be using sparsemem rather than discontigmem, so
remove the code supporting discontigmem from ARM.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-16 10:57:35 +01:00
Russell King
7961239599 ARM: Precalculate vmalloc_min
Rather than storing the minimum size of the vmalloc area, store the
maximum permitted address of the vmalloc area instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-16 10:57:35 +01:00
Linus Torvalds
349e1fba7e Merge branch 'for-linus/samsung4' of git://git.fluff.org/bjdooks/linux
* 'for-linus/samsung4' of git://git.fluff.org/bjdooks/linux: (98 commits)
  Input: s3c24xx_ts - depend on SAMSUNG_DEV_TS and update menu entry
  Input: s3c24xx_ts - Add FEAT for Samsung touchscreen support
  Input: s3c24xx_ts - Implement generic GPIO configuration callback
  ARM: SAMSUNG: Move s3c64xx dev-ts.c to plat-samsung and rename configuration
  ARM: SAMSUNG: Implements cfg_gpio function for Samsung touchscreen
  ARM: S3C64XX: Add touchscreen platform device definition
  ARM: SAMSUNG: Move mach/ts.h to plat/ts.h
  ARM: S5PC100: Move i2c helpers from plat-s5pc1xx to mach-s5pc100
  ARM: S5PC100: Move frame buffer helpers from plat-s5pc1xx to mach-s5pc100
  ARM: S5PC100: gpio.h cleanup
  ARM: S5PC100: Move gpio support from plat-s5pc1xx to mach-s5pc100
  ARM: S5PC100: Use common functions for gpiolib implementation
  drivers: serial: S5PC100 serial driver cleanup
  ARM: S5PC100: Pre-requisite clock patch for plat-s5pc1xx to plat-s5p move
  ARM: SAMSUNG: Copy common I2C0 device helpers to machine directories
  ARM: SAMSUNG: move driver strength gpio configuration helper to common dir
  ARM: S5PV210: Add GPIOlib support
  ARM: SAMSUNGy: fix broken timer irq base
  ARM: SMDK6440: Add audio devices on board
  ARM: S5P6440: Add audio platform devices
  ...
2010-05-19 11:49:33 -07:00
Russell King
ac1d426e82 Merge branch 'devel-stable' into devel
Conflicts:
	arch/arm/Kconfig
	arch/arm/include/asm/system.h
	arch/arm/mm/Kconfig
2010-05-17 17:24:04 +01:00
Russell King
a2227120ee ARM: Move memory mapping into mmu.c
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-15 15:03:49 +01:00
Russell King
ceb683d3bc ARM: Ensure meminfo is sorted prior to sanity_check_meminfo
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-15 15:03:49 +01:00
Vasily Khoruzhick
0741b7d269 ARM: RX1950: Add suspend/resume support for RX1950
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-12 09:19:54 +09:00
Mika Westerberg
3f2d4f561f ARM: 6052/1: kdump: make kexec work in interrupt context
When crash happens in interrupt context there is no userspace context.
We always use current->active_mm in those cases.

Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14 11:11:31 +01:00
Russell King
85b3cce880 ARM: Fix ioremap_cached()/ioremap_wc() for SMP platforms
Write combining/cached device mappings are not setting the shared bit,
which could potentially cause problems on SMP systems since the cache
lines won't participate in the cache coherency protocol.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-04-09 15:00:11 +01:00
Russell King
9f33be2c3a Merge branches 'clks' and 'pnx' into devel 2010-02-25 22:10:38 +00:00
Jeremy Kerr
2b0d8c251b ARM: 5880/1: arm: use generic infrastructure for early params
The ARM setup code includes its own parser for early params, there's
also one in the generic init code.

This patch removes __early_init (and related code) from
arch/arm/kernel/setup.c, and changes users to the generic early_init
macro instead.

The generic macro takes a char * argument, rather than char **, so we
need to update the parser functions a little.

Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15 21:39:13 +00:00
Tony Lindgren
ad3e6c0b1f ARM: 5885/1: arm: Flush TLB entries in setup_mm_for_reboot()
We need to do that if we tinker with the MMU entries.

This fixes the occasional bug with kexec where the new
fails to uncompress with "crc error". Most likely at
least kexec on v6 and v7 need this fix.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-19 20:23:17 +00:00
Russell King
6dc995a3da ARM: fix PAGE_KERNEL
PAGE_KERNEL should not be executable; any area marked executable can
be prefetched into the instruction cache.  We don't want vmalloc areas
to be read in this way.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-24 10:16:21 +00:00
Russell King
0719dc3413 Merge branch 'devel-stable' into devel 2009-12-05 10:35:33 +00:00
Russell King
421fe93cc4 ARM: ZERO_PAGE: Avoid flush_dcache_page() for zero page
The zero page is read-only, and has its cache state cleared during
boot.  No further maintanence for this page is required.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 18:20:07 +00:00
Tomáš Čech
d0a92fd3b8 [ARM] pxa/treo: add Palm Centro 685 support
Signed-off-by: Tomáš Čech <sleep_walker@suse.cz>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:02:49 +08:00
Russell King
4b46d64165 ARM: ensure initial page tables are setup for SMP systems
Mapping the same memory using two different attributes (memory
type, shareability, cacheability) is unpredictable.  During boot,
we encounter a situation when we're updating the kernel's page
tables which can lead to dirty cache lines existing in the cache
which are subsequently missed.  This causes stack corruption,
and therefore a crash.

Therefore, ensure that the shared and cacheability settings
matches the configuration that will be used later; this together
with the restriction in early_cachepolicy() ensures that we won't
create a mismatch during boot.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-02 16:59:59 +00:00
Russell King
e616c59140 ARM: Don't allow highmem on SMP platforms without h/w TLB ops broadcast
We suffer an unfortunate combination of "features" which makes highmem
support on platforms without hardware TLB maintainence broadcast difficult:

- we need kmap_high_get() support for DMA cache coherence
- this requires kmap_high() to take a spinlock with IRQs disabled
- kmap_high() occasionally calls flush_all_zero_pkmaps() to clear
  out old mappings
- flush_all_zero_pkmaps() calls flush_tlb_kernel_range(), which
  on s/w IPI'd systems eventually calls smp_call_function_many()
- smp_call_function_many() must not be called with IRQs disabled:

WARNING: at kernel/smp.c:380 smp_call_function_many+0xc4/0x240()
Modules linked in:
Backtrace:
[<c00306f0>] (dump_backtrace+0x0/0x108) from [<c0286e6c>] (dump_stack+0x18/0x1c)
 r6:c007cd18 r5:c02ff228 r4:0000017c
[<c0286e54>] (dump_stack+0x0/0x1c) from [<c0053e08>] (warn_slowpath_common+0x50/0x80)
[<c0053db8>] (warn_slowpath_common+0x0/0x80) from [<c0053e50>] (warn_slowpath_null+0x18/0x1c)
 r7:00000003 r6:00000001 r5:c1ff4000 r4:c035fa34
[<c0053e38>] (warn_slowpath_null+0x0/0x1c) from [<c007cd18>] (smp_call_function_many+0xc4/0x240)
[<c007cc54>] (smp_call_function_many+0x0/0x240) from [<c007cec0>] (smp_call_function+0x2c/0x38)
[<c007ce94>] (smp_call_function+0x0/0x38) from [<c005980c>] (on_each_cpu+0x1c/0x38)
[<c00597f0>] (on_each_cpu+0x0/0x38) from [<c0031788>] (flush_tlb_kernel_range+0x50/0x58)
 r6:00000001 r5:00000800 r4:c05f3590
[<c0031738>] (flush_tlb_kernel_range+0x0/0x58) from [<c009c600>] (flush_all_zero_pkmaps+0xc0/0xe8)
[<c009c540>] (flush_all_zero_pkmaps+0x0/0xe8) from [<c009c6b4>] (kmap_high+0x8c/0x1e0)
[<c009c628>] (kmap_high+0x0/0x1e0) from [<c00364a8>] (kmap+0x44/0x5c)
[<c0036464>] (kmap+0x0/0x5c) from [<c0109dfc>] (cramfs_readpage+0x3c/0x194)
[<c0109dc0>] (cramfs_readpage+0x0/0x194) from [<c0090c14>] (__do_page_cache_readahead+0x1f0/0x290)
[<c0090a24>] (__do_page_cache_readahead+0x0/0x290) from [<c0090ce4>] (ra_submit+0x30/0x38)
[<c0090cb4>] (ra_submit+0x0/0x38) from [<c0089384>] (filemap_fault+0x3dc/0x438)
 r4:c1819988
[<c0088fa8>] (filemap_fault+0x0/0x438) from [<c009d21c>] (__do_fault+0x58/0x43c)
[<c009d1c4>] (__do_fault+0x0/0x43c) from [<c009e8cc>] (handle_mm_fault+0x104/0x318)
[<c009e7c8>] (handle_mm_fault+0x0/0x318) from [<c0033c98>] (do_page_fault+0x188/0x1e4)
[<c0033b10>] (do_page_fault+0x0/0x1e4) from [<c0033ddc>] (do_translation_fault+0x7c/0x84)
[<c0033d60>] (do_translation_fault+0x0/0x84) from [<c002b474>] (do_DataAbort+0x40/0xa4)
 r8:c1ff5e20 r7:c0340120 r6:00000805 r5:c1ff5e54 r4:c03400d0
[<c002b434>] (do_DataAbort+0x0/0xa4) from [<c002bcac>] (__dabt_svc+0x4c/0x60)
...

So we disable highmem support on these systems.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-28 18:06:20 +01:00
Russell King
041d785f80 ARM: Fix warning: unused variable 'highmem'
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-28 18:06:20 +01:00
Russell King
dde5828f56 ARM: Fix broken highmem support
Currently, highmem is selectable, and you can request an increased
vmalloc area.  However, none of this has any effect on the memory
layout since a patch in the highmem series was accidentally dropped.
Moreover, even if you did want highmem, all memory would still be
registered as lowmem, possibly resulting in overflow of the available
virtual mapping space.

The highmem boundary is determined by the highest allowed beginning
of the vmalloc area, which depends on its configurable minimum size
(see commit 60296c71f6 for details on
this).

We should create mappings and initialize bootmem only for low memory,
while the zone allocator must still be told about highmem.

Currently, memory nodes which are completely located in high memory
are not supported.  This is not a huge limitation since systems
relying on highmem support are unlikely to have discontiguous memory
with large holes.

[ A similar patch was meant to be merged before commit 5f0fbf9eca
  and be available  in Linux v2.6.30, however some git rebase screw-up
  of mine dropped the first commit of the series, and that goofage
  escaped testing somehow as well. -- Nico ]

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Nicolas Pitre <nico@marvell.com>
2009-08-15 12:36:00 +01:00
Russell King
187f81b3d8 Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel 2009-06-18 23:09:52 +01:00
Tomas 'Sleep_Walker' Cech
e6c3f4b89b [ARM] pxa/treo680: initial support
Signed-off-by: Tomáš Čech <sleep_walker@suse.cz>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-16 21:03:34 +08:00
Russell King
b7c11ec9f1 Merge branch 'u300' into devel
Conflicts:
	arch/arm/Makefile
Updates:
	arch/arm/mach-u300/core.c
	arch/arm/mach-u300/timer.c
2009-06-14 11:01:44 +01:00
Hiroshi DOYU
69d3a84a64 omap iommu: simple virtual address space management
This patch provides a device drivers, which has a omap iommu, with
address mapping APIs between device virtual address(iommu), physical
address and MPU virtual address.

There are 4 possible patterns for iommu virtual address(iova/da) mapping.

    |iova/			  mapping		iommu_		page
    | da	pa	va	(d)-(p)-(v)		function	type
  ---------------------------------------------------------------------------
  1 | c		c	c	 1 - 1 - 1	  _kmap() / _kunmap()	s
  2 | c		c,a	c	 1 - 1 - 1	_kmalloc()/ _kfree()	s
  3 | c		d	c	 1 - n - 1	  _vmap() / _vunmap()	s
  4 | c		d,a	c	 1 - n - 1	_vmalloc()/ _vfree()	n*

    'iova':	device iommu virtual address
    'da':	alias of 'iova'
    'pa':	physical address
    'va':	mpu virtual address

    'c':	contiguous memory area
    'd':	dicontiguous memory area
    'a':	anonymous memory allocation
    '()':	optional feature

    'n':	a normal page(4KB) size is used.
    's':	multiple iommu superpage(16MB, 1MB, 64KB, 4KB) size is used.

    '*':	not yet, but feasible.

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2009-05-19 08:23:49 +03:00
Linus Walleij
d98aac7592 [ARM] 5480/1: U300-v5 integrate into the ARM architecture
This hooks the U300 support into Kbuild and makes a small hook
in mmu.c for supporting an odd memory alignment with shared memory
on these systems.

This is rebased to RMK:s GIT HEAD. This patch tries to add the
Kconfig option in alphabetic order by option text and the Makefile
entry after config symbol.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-28 22:44:29 +01:00
Marek Vasut
81854f82c5 [ARM] pxa: Add support for suspend on PalmTX, T5 and LD
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-04 10:26:34 +08:00
Russell King
9759d22c83 Merge branch 'master' into devel
Conflicts:
	arch/arm/include/asm/elf.h
	arch/arm/kernel/module.c
2009-03-28 20:30:18 +00:00
Mikael Pettersson
f0bba9f934 [ARM] 5435/1: fix compile warning in sanity_check_meminfo()
Compiling recent 2.6.29-rc kernels for ARM gives me the following warning:

arch/arm/mm/mmu.c: In function 'sanity_check_meminfo':
arch/arm/mm/mmu.c:697: warning: comparison between pointer and integer

This is because commit 3fd9825c42
"[ARM] 5402/1: fix a case of wrap-around in sanity_check_meminfo()"
in 2.6.29-rc5-git4 added a comparison of a pointer with PAGE_OFFSET,
which is an integer.

Fixed by casting PAGE_OFFSET to void *.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-28 20:21:20 +00:00
Russell King
fbf2b1f9cf Merge branch 'highmem' into devel 2009-03-24 22:47:45 +00:00
Nicolas Pitre
3f973e2216 [ARM] ignore high memory with VIPT aliasing caches
VIPT aliasing caches have issues of their own which are not yet handled.
Usage of discard_old_kernel_data() in copypage-v6.c is not highmem ready,
kmap/fixmap stuff doesn't take account of cache colouring, etc.
If/when those issues are handled then this could be reverted.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-03-15 21:01:22 -04:00
Nicolas Pitre
d73cd42893 [ARM] kmap support
The kmap virtual area borrows a 2MB range at the top of the 16MB area
below PAGE_OFFSET currently reserved for kernel modules and/or the
XIP kernel.  This 2MB corresponds to the range covered by 2 consecutive
second-level page tables, or a single pmd entry as seen by the Linux
page table abstraction.  Because XIP kernels are unlikely to be seen
on systems needing highmem support, there shouldn't be any shortage of
VM space for modules (14 MB for modules is still way more than twice the
typical usage).

Because the virtual mapping of highmem pages can go away at any moment
after kunmap() is called on them, we need to bypass the delayed cache
flushing provided by flush_dcache_page() in that case.

The atomic kmap versions are based on fixmaps, and
__cpuc_flush_dcache_page() is used directly in that case.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-03-15 21:01:20 -04:00
Russell King
97fb44eb6b Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel
Conflicts:

	arch/arm/mach-at91/gpio.c
2009-03-13 21:44:51 +00:00
Paul Walmsley
e4707dd3e9 [ARM] 5422/1: ARM: MMU: add a Non-cacheable Normal executable memory type
This patch adds a Non-cacheable Normal ARM executable memory type,
MT_MEMORY_NONCACHED.

On OMAP3, this is used for rapid dynamic voltage/frequency scaling in
the VDD2 voltage domain. OMAP3's SDRAM controller (SDRC) is in the
VDD2 voltage domain, and its clock frequency must change along with
voltage. The SDRC clock change code cannot run from SDRAM itself,
since SDRAM accesses are paused during the clock change. So the
current implementation of the DVFS code executes from OMAP on-chip
SRAM, aka "OCM RAM."

If the OCM RAM pages are marked as Cacheable, the ARM cache controller
will attempt to flush dirty cache lines to the SDRC, so it can fill
those lines with OCM RAM instruction code. The problem is that the
SDRC is paused during DVFS, and so any SDRAM access causes the ARM MPU
subsystem to hang.

TI's original solution to this problem was to mark the OCM RAM
sections as Strongly Ordered memory, thus preventing caching. This is
overkill: since the memory is marked as non-bufferable, OCM RAM writes
become needlessly slow. The idea of "Strongly Ordered SRAM" is also
conceptually disturbing. Previous LAKML list discussion is here:

http://www.spinics.net/lists/arm-kernel/msg54312.html

This memory type MT_MEMORY_NONCACHED is used for OCM RAM by a future
patch.

Cc: Richard Woodruff <r-woodruff2@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-12 19:25:02 +00:00
Nicolas Pitre
3fd9825c42 [ARM] 5402/1: fix a case of wrap-around in sanity_check_meminfo()
In the non highmem case, if two memory banks of 1GB each are provided,
the second bank would evade suppression since its virtual base would
be 0.  Fix this by disallowing any memory bank which virtual base
address is found to be lower than PAGE_OFFSET.

Reported-by: Lennert Buytenhek <buytenh@marvell.com>

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-19 09:49:45 +00:00
Julia Lawall
6ce1b871db [ARM] eliminate NULL test and memset after alloc_bootmem
As noted by Akinobu Mita in patch b1fceac2b9,
alloc_bootmem and related functions never return NULL and always return a
zeroed region of memory.  Thus a NULL test or memset after calls to these
functions is unnecessary.

This was fixed using the following semantic patch.
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
expression E;
statement S;
@@

E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\|alloc_bootmem_node\|alloc_bootmem_low_pages_node\|alloc_bootmem_pages_node\)(...)
... when != E
(
- BUG_ON (E == NULL);
|
- if (E == NULL) S
)

@@
expression E,E1;
@@

E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\|alloc_bootmem_node\|alloc_bootmem_low_pages_node\|alloc_bootmem_pages_node\)(...)
... when != E
- memset(E,0,E1);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-14 12:05:03 +00:00
Russell King
37efe6427d [ARM] use asm/sections.h
Update to use the asm/sections.h header rather than declaring these
symbols ourselves.  Change __data_start to _data to conform with the
naming found within asm/sections.h.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-01 11:53:07 +00:00
Russell King
7ef4de17cc Merge branch 'highmem' into devel
Conflicts:

	arch/arm/mach-clps7500/include/mach/memory.h
2008-11-28 15:39:02 +00:00
Nicolas Pitre
9210807cb5 [ARM] prevent the vmalloc cmdline argument from eating all memory
Commit 8d5796d2ec allows for the vmalloc
area to be resized from the kernel cmdline.  Make sure it cannot overlap
with RAM entirely.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-28 15:36:47 +00:00