Commit graph

84 commits

Author SHA1 Message Date
Anton Blanchard
856cc2f0be powerpc/pseries: Fix ibm,client-architecture comment
We specify a 64MB RMO, but the comment says 128MB.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-07 15:18:59 +10:00
Anton Blanchard
1f8737aab3 powerpc: Clean up some prom printouts
Make all messages consistent, some have spaces before the "...", some do not.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-07 15:18:59 +10:00
Anton Blanchard
4da727ae2a powerpc: Print progress of ibm,client-architecture method
The ibm,client-architecture method will often cause a reconfiguration reboot.
When this happens the last thing we see is:

	Hypertas detected, assuming LPAR !

Which doesn't explain what just happened.  Wrap the ibm,client-architecture
so it's clear what is going on:

	Calling ibm,client-architecture... done

In order to maintain the law of conservation of screen real estate, downgrade
two other messages to debug.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-07 15:18:58 +10:00
Benjamin Herrenschmidt
151a9f4aef powerpc: Fix prom_init on 32-bit OF machines
Commit e7943fbbfd broke ppc32 using
Open Firmware client interface due to using the wrong relocation
macro when accessing the variable "linux_banner".

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-24 13:43:35 +11:00
Michael Ellerman
e7943fbbfd powerpc: Print linux_banner in prom_init
So at least you can see what kernel you're booting if you die
before the kernel prints it mid-way through start_kernel().

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11 17:11:33 +11:00
Ingo Molnar
2b931fb67e powerpc: Use correct type in prom_init.c
tce_entryp is a "u64 *" not an "unsigned long *".

[Split from a large patch -sfr]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-08 16:25:16 +11:00
Paul Mackerras
5663a1232b Revert "powerpc: Sync RPA note in zImage with kernel's RPA note"
This reverts commit 91a0030295, plus
commit 0dcd440120 ("powerpc: Revert CHRP
boot wrapper to real-base = 12MB on 32-bit") which depended on it.

Commit 91a00302 was causing NVRAM corruption on some pSeries machines,
for as-yet unknown reasons, so this reverts it until the cause is
identified.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-31 22:36:21 +11:00
Milton Miller
34d81f858a powerpc: Delete unused prom_strtoul and prom_memparse
These functions should have been static, and inspection shows they
are no longer used.   (We used to parse mem= but we now defer that
to early_param).

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-21 15:20:08 +11:00
Paul Mackerras
91a0030295 powerpc: Sync RPA note in zImage with kernel's RPA note
Commit 9b09c6d909 ("powerpc: Change the
default link address for pSeries zImage kernels") changed the
real-base value in the CHRP note added by the addnote program from
12MB to 32MB to give more space for Open Firmware to load the zImage.
(The real-base value says where we want OF to position itself in
memory.)  However, this change was ineffective on most pSeries
machines, because the RPA note added by addnote has the "ignore me"
flag set to 1.  This was intended to tell OF to ignore just the RPA
note, but has the side effect of also making OF ignore the CHRP note
(at least on most pSeries machines).

To solve this we have to set the "ignore me" flag to 0 in the RPA
note.  (We can't just omit the RPA note because that is equivalent to
having an RPA note with default values, and the default values are not
what we want.)  However, then we have to make sure the values in the
zImage's RPA note match up with the values that the kernel supplies
later in prom_init.c with either the ibm,client-architecture-support
call or the process-elf-header call in prom_send_capabilities().

So this sets the "ignore me" flag in the RPA note in addnote to 0, and
adjusts the RPA note values in addnote.c and in prom_init.c to be
consistent with each other and with the values in ibm_architecture_vec.

However, since the wrapper is independent of the kernel, this doesn't
ensure that the notes will stay consistent.  To ensure that, this adds
code to addnote.c so that it can extract the kernel's RPA note from
the kernel binary and put that in the zImage.  To that end, we put the
kernel's fake ELF header (which contains the kernel's RPA note) into
its own section, and arrange for wrapper to pull out that section with
objcopy and pass it to addnote, which then extracts the RPA note from
it and transfers it to the zImage.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-10 15:55:19 +11:00
Paul Mackerras
549e8152de powerpc: Make the 64-bit kernel as a position-independent executable
This implements CONFIG_RELOCATABLE for 64-bit by making the kernel as
a position-independent executable (PIE) when it is set.  This involves
processing the dynamic relocations in the image in the early stages of
booting, even if the kernel is being run at the address it is linked at,
since the linker does not necessarily fill in words in the image for
which there are dynamic relocations.  (In fact the linker does fill in
such words for 64-bit executables, though not for 32-bit executables,
so in principle we could avoid calling relocate() entirely when we're
running a 64-bit kernel at the linked address.)

The dynamic relocations are processed by a new function relocate(addr),
where the addr parameter is the virtual address where the image will be
run.  In fact we call it twice; once before calling prom_init, and again
when starting the main kernel.  This means that reloc_offset() returns
0 in prom_init (since it has been relocated to the address it is running
at), which necessitated a few adjustments.

This also changes __va and __pa to use an equivalent definition that is
simpler.  With the relocatable kernel, PAGE_OFFSET and MEMORY_START are
constants (for 64-bit) whereas PHYSICAL_START is a variable (and
KERNELBASE ideally should be too, but isn't yet).

With this, relocatable kernels still copy themselves down to physical
address 0 and run there.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-09-15 11:08:38 -07:00
Paul Mackerras
1f6a93e4c3 powerpc: Make it possible to move the interrupt handlers away from the kernel
This changes the way that the exception prologs transfer control to
the handlers in 64-bit kernels with the aim of making it possible to
have the prologs separate from the main body of the kernel.  Now,
instead of computing the address of the handler by taking the top
32 bits of the paca address (to get the 0xc0000000........ part) and
ORing in something in the bottom 16 bits, we get the base address of
the kernel by doing a load from the paca and add an offset.

This also replaces an mfmsr and an ori to compute the MSR value for
the handler with a load from the paca.  That makes it unnecessary to
have a separate version of EXCEPTION_PROLOG_PSERIES that forces 64-bit
mode.

We can no longer use a direct branches in the exception prolog code,
which means that the SLB miss handlers can't branch directly to
.slb_miss_realmode any more.  Instead we have to compute the address
and do an indirect branch.  This is conditional on CONFIG_RELOCATABLE;
for non-relocatable kernels we use a direct branch as before.  (A later
change will allow CONFIG_RELOCATABLE to be set on 64-bit powerpc.)

Since the secondary CPUs on pSeries start execution in the first 0x100
bytes of real memory and then have to get to wherever the kernel is,
we can't use a direct branch to get there.  Instead this changes
__secondary_hold_spinloop from a flag to a function pointer.  When it
is set to a non-NULL value, the secondary CPUs jump to the function
pointed to by that value.

Finally this eliminates one code difference between 32-bit and 64-bit
by making __secondary_hold be the text address of the secondary CPU
spinloop rather than a function descriptor for it.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-09-15 11:08:08 -07:00
Nathan Lynch
7d2f6075f9 powerpc: kill useless SMT code in prom_hold_cpus
This piece of code is broken for >2 threads, and possibly in some
other subtle ways (such as comparing a value obtained from an
"ibm,ppc-interrupt-server#s" property to a value obtained from a
"reg" property) and doesn't seem to have any useful purpose in the
first place other than a dubious warning in case NR_CPUS is too
small, which probably isn't the right place to do so.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28 16:30:48 +10:00
Nathan Fontenot
8391e42a5c powerpc/pseries: Update arch vector to indicate support for CMO
Update the architecture vector to indicate that Cooperative Memory
Overcommitment is supported if CONFIG_PPC_SMLPAR is set.

Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-25 15:44:45 +10:00
Joel Schopp
0cb9901377 powerpc: Tell firmware we support architecture V2.06
Add the bits to the architecture-vec so that ibm,client-architecture
lets the firmware know we support the 2.06 architecture.

Signed-off-by: Joel Schopp <jschopp@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-01 11:28:00 +10:00
Michael Neuling
e952e6c4d6 powerpc: Add cputable entry for POWER7
Add a cputable entry for the POWER7 processor.

Also tell firmware that we know about POWER7.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Joel Schopp <jschopp@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-30 22:31:11 +10:00
David Woodhouse
7f4392cdcc [POWERPC] Efika: Really, don't pretend to be CHRP
Fedora 9 works on Efika without the separate 'device-tree supplement',
thanks to the kernel's own fixups. With one exception -- because 'CHRP'
still appears on the 'machine:' line in /proc/cpuinfo, the installer
misdetects the platform and misconfigures yaboot, putting it into a PReP
boot partition instead of in the /boot filesystem where the Efika's
firmware could find it.

The kernel's fixups for Efika already correct one instance of 'chrp', in
the 'device_type' property. This fixes it in the 'CODEGEN,description'
property too, since that's what's exposed to userspace in /proc/cpuinfo.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-17 07:46:12 +10:00
Grant Likely
94d2dde738 [POWERPC] Efika: prune fixups and make them more carefull
Prune back Efika fixups to only include changes that are actually required
to get a working system.  Most of the drivers can accept the compatible
properties, even if they don't match the what is recommented in the generic
names recommended practice document.

This patch also adds extra checks so that fixups are not performed blindly.
Instead, the code first verifies that the device tree is faulty before
making any changes.  This way, if the Efika firmware is updated to fix
these issues, then the fixups will no longer get applied.

At this point; here is the list of fixups needed for the efika:
1. If the device_type property on the root node is 'chrp', then Linux won't
   boot.  Change device_type to 'efika' to avoid this condition
2. Add full interrupt list to the bestcomm node.  In actual fact, the
   bestcomm interrupts property is technically correct, it just doesn't
   expose the same granularity as the device driver expects.  All other
   5200 device trees provide a separate irq number for each bestcomm
   channel.  Rather than hack the driver, it's simpler to fix it up
3. /builtin/sound node is missing an interrupts property
4. /builtin/ethernet node is missing a phy-handle property and the
   device driver doesn't know what to do without one.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-01-26 15:32:18 -07:00
Olaf Hering
6f4347c969 [POWERPC] efika: add phy-handle property for fec_mpc52xx
The new network driver fec_mpc52xx will not work on efika because the
firmware does not provide all required properties.
http://www.powerdeveloper.org/asset/by-id/46 has a Forth script to
create more properties. But only the phy stuff is required to get a
working network.

This should go into the kernel because its appearently
impossible to boot the script via tftp and then load the real boot
binary (yaboot or zimage).

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-01-10 08:12:59 -07:00
Li Zefan
aca71ef882 [POWERPC] ] Fix memset size error
The size passing to memset is wrong.

Signed-off-by Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:33 +11:00
Linas Vepstas
e788ff13be [POWERPC] prom_init whitespace cleanup, typo fix
Whitespace cleanup: badly indented lines.
Typo in comment.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:24 +10:00
Olaf Hering
556ecf9be6 [POWERPC] Advertise correct IDE mode on Pegasos2
The built-in IDE controller is configured in legacy mode, but the PCI
registers advertise native mode.  Force the PCI class into legacy
mode. This allows pata_via to access two drives.

The Pegasos specific irq enforcement in the via82cxxx driver must stay
because there is apparently no generic way to setup irq per channel.

Tested on Pegasos2 with firmware version 20040810, and two IDE disks.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 15:21:46 +10:00
Jake Moilanen
d8c391a559 [POWERPC] Donate idle CPU cycles on dedicated partitions
A Power6 can give up CPU cycles on a dedicated CPU (as opposed to a
shared CPU) to other shared processors if the administrator asks for it
(via the HMC).

This enables that to work properly on P6.

This just involves setting a bit in the CAS structure as well as the
VPA.  To donate cycles, a CPU has to have all SMT threads idle and
have the donate bit set in the VPA.  Then call H_CEDE.

The reason why shared processors just aren't used is because dedicated
CPUs are guaranteed an actual processor, yet the system is still able to
increase the capacity of the shared CPU pool.

Also rename the VPA's cpuctls_task_attrs field to a more accurate name.

Signed-off-by: Jake Moilanen <moilanen@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-14 22:29:58 +10:00
Michael Ellerman
014dad902a [POWERPC] Tell Phyp we support MSI
Tell Phyp we support MSI via the client architecture support mechanism.

Signed-off-by: Jake Moilanen <moilanen@austin.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08 13:40:31 +10:00
Michael Ellerman
0108d3fe3c [POWERPC] Add __init annotations to reserve_mem() and stabs_alloc()
reserve_mem() and stabs_alloc() are both called only from other __init
routines, so can be marked __init.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08 11:54:19 +10:00
Domen Puncer
3a5cc44268 [POWERPC] Set efika's device_type to "soc"
Device type should be "soc" (as in lite5200.dts), compatible is
already set to "mpc5200".

Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:31:15 +10:00
Olaf Hering
e48059225c [POWERPC] Add correct interrupt property for pegasos ide
The firmware assigns irq 20/21 to the VIA IDE device on Pegasos.
But the required interrupt is 14/15.
Maybe someone confused decimal vs. hexadecimal values.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 04:00:25 +10:00
Sylvain Munaut
88fd2a9d68 [POWERPC] Add device tree fixups for the EFIKA
We make the efika device tree compliant with the defined bindings
(at least compliant enough). This is mostly done by mangling
the device_type and compatible properties, but also adding
some missing bits.

Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-13 15:35:53 +11:00
Paul Mackerras
0204568a08 [POWERPC] Support ibm,dynamic-reconfiguration-memory nodes
For PAPR partitions with large amounts of memory, the firmware has an
alternative, more compact representation for the information about the
memory in the partition and its NUMA associativity information.  This
adds the code to the kernel to parse this alternative representation.

The other part of this patch is telling the firmware that we can
handle the alternative representation.  There is however a subtlety
here, because the firmware will invoke a reboot if the memory
representation we request is different from the representation that
firmware is currently using.  This is because firmware can't change
the representation on the fly.  Further, some firmware versions used
on POWER5+ machines have a bug where this reboot leaves the machine
with an altered value of load-base, which will prevent any kernel
booting until it is reset to the normal value (0x4000).  Because of
this bug, we do NOT set fake_elf.rpanote.new_mem_def = 1, and thus we
do not request the new representation on POWER5+ and earlier machines.
We do request the new representation on POWER6, which uses the
ibm,client-architecture-support call.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-11 13:49:49 +11:00
Paul Mackerras
0efbc18a75 [POWERPC] Tell firmware we can handle POWER6 compatible mode
This adds the "logical" PVR value used by POWER6 in "compatible" mode
to the list of PVR values that the kernel tells firmware it is able to
handle.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:41:53 +11:00
Paul Mackerras
974a76f513 [POWERPC] Distinguish POWER6 partition modes and tell userspace
This adds code to look at the properties firmware puts in the device
tree to determine what compatibility mode the partition is in on
POWER6 machines, and set the ELF aux vector AT_HWCAP and AT_PLATFORM
entries appropriately.

Specifically, we look at the cpu-version property in the cpu node(s).
If that contains a "logical" PVR value (of the form 0x0f00000x), we
call identify_cpu again with this PVR value.  A value of 0x0f000001
indicates the partition is in POWER5+ compatibility mode, and a value
of 0x0f000002 indicates "POWER6 architected" mode, with various
extensions disabled.  We also look for various other properties:
ibm,dfp, ibm,purr and ibm,spurr.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:40:16 +11:00
Jeremy Kerr
165785e5c0 [POWERPC] Cell iommu support
This patch adds full cell iommu support (and iommu disabled mode).

It implements mapping/unmapping of iommu pages on demand using the
standard powerpc iommu framework.  It also supports running with
iommu disabled for machines with less than 2GB of memory.  (The
default is off in that case, though it can be forced on with the
kernel command line option iommu=force).

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:39:02 +11:00
Paul Mackerras
aa43f77939 Merge branch 'merge' 2006-08-31 15:45:48 +10:00
Will Schmidt
11e9ed43ca [POWERPC] Fix up ibm_architecture_vec definition
This problem was noticed by one of the Phyp firmware folks.
Our ibm,client-architecture-support call was failing.
This corrects the vector length parameters being passed in.

Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-30 14:34:04 +10:00
Benjamin Herrenschmidt
21bd2e6696 [POWERPC] Fix 32 bits warning in prom_init.c
A warning is hurting my eyes when building 32 bits kernels

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-26 01:26:43 +10:00
Benjamin Herrenschmidt
f0ca330bc4 [POWERPC] Workaround Pegasos incorrect ISA "ranges"
The Pegasos firmware doesn't create a valid "ranges" property for the
ISA bridge, thus causing translation of ISA addresses and IO ports to
fail. This fixes it, thus re-enabling proper early serial console to
work on Pegasos.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-26 01:26:24 +10:00
Benjamin Herrenschmidt
26c5032eaa [POWERPC] Add briq support to CHRP
The support for Briq machines has been floating around as patches for
ages. This cleans it up and adds it once for all.

Some of this is based on initial code provided by Karsten Jeppesen
<karsten@jeppesens.com> and mostly rewritten from scratch by me.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-07 20:19:15 +10:00
Benjamin Herrenschmidt
470407a88e [POWERPC] Fix 32 bits warning in prom_init.c
A warning is hurting my eyes when building 32 bits kernels

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-07 20:19:15 +10:00
Benjamin Herrenschmidt
e8c0acf9a4 [POWERPC] Workaround Pegasos incorrect ISA "ranges"
The Pegasos firmware doesn't create a valid "ranges" property for the
ISA bridge, thus causing translation of ISA addresses and IO ports to
fail. This fixes it, thus re-enabling proper early serial console to
work on Pegasos.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-07 20:19:15 +10:00
Benjamin Herrenschmidt
980a651365 [POWERPC] Fix booting on Momentum "Apache" board (a Maple derivative)
This extends the maple device-tree workarounds to work on the
Apache board as well, and extends the maple platform probing code
to recognize the Apache board.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 17:22:05 +10:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Adrian Bunk
b3c2ffd534 typo fixes: mecanism -> mechanism
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 18:20:44 +02:00
Amos Waterland
0e4aa9c200 [POWERPC] Fix builtin command line interaction with firmware
It seems that prom_init's early_cmdline_parse is broken on at least
Apple 970 xserves and IBM JS20 blades with SLOF.  The firmware of these
machines returns -1 and 1 respectively when getprop is called for the
bootargs property of /chosen, causing Linux to ignore its builtin
command line in favor of a null string.  This patch makes Linux use its
builtin command line if getprop returns an error or a null string.

Signed-off-by: Amos Waterland <apw@us.ibm.com>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-15 19:31:26 +10:00
Paul Mackerras
7a0c58d051 Merge branch 'merge' 2006-06-12 17:53:34 +10:00
Arnd Bergmann
133dda1e4f [PATCH] powerpc: Fix cell blade detection
The IBM Cell blade firmware might confuse the kernel to think it's a
pSeries machine. This fixes it for now. With a bit of luck, the firmware
will be updated to avoid that in the future but currently that patch is
needed.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-09 13:06:00 +10:00
Benjamin Herrenschmidt
33b7497794 [PATCH] powerpc: Fix call to ibm,client-architecture-support
The code in prom_init.c calling the firmware
ibm,client-architecture-support method on pSeries has a bug where it
fails to properly pass the instance handle of the firmware object when
trying to call a method. Result ranges from the call doing nothing to
the firmware crashing. (Found by Segher, thanks !)

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-09 13:05:51 +10:00
Paul Mackerras
c029cc66cb Merge branch 'merge' 2006-06-01 19:05:23 +10:00
Hollis Blanchard
54f4ee183a [PATCH] powerpc: fix RTC/NVRAM accesses on Maple
Due to a firmware device tree bug, RTC and NVRAM accesses (including
halt/reboot) on Maple have been broken since January, when an untested
build fix went in. This code patches the device tree in Linux.

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-26 22:39:00 +10:00
Paul Mackerras
3c06da5ae5 Merge ../linux-2.6 2006-05-19 15:02:42 +10:00
Jimi Xenidis
4d1f3f25d9 [PATCH] powerpc: Auto reserve of device tree blob
A devtree compiler (dtc) generated devtree blob is "relocatable" and so
does not contain a reserved_map entry for the blob itself.  This means
that if passed to Linux, Linux will not get lmb_reserve() the blob and
it could be over.  The following patch will explicitly reserve the
"blob" as it was given to us and stops prom_init.c from creating a
reserved mapping for the blob.

NOTE: that the dtc/kexec should not generate the blob reservation entry.
Although if they do, LMB reserver handles overlaps.

Signed-off-by:  <jimix@watson.ibm.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-19 15:02:26 +10:00
Michael Ellerman
35dd54326e [PATCH] powerpc: Move crashkernel= handling into the kernel.
This was missing a quilt ref.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-19 15:02:18 +10:00