mem-memcpy.c uses perf event system calls to obtain CPU clocks.
And it suddenly dies with BUG_ON() when it running on Linux
doesn't support perf event.
Also fail at calloc() can occur easily when too large
length is passed. Fail of calloc() causes sudden death
with assert().
These behaviours are not friendly. So I fixed the treating of
errors.
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1258688237-3797-1-git-send-email-mitake@dcl.info.waseda.ac.jp>
[ v2: improved a few small details ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It better propagate errors, also if we do a simple:
[root@doppio linux-2.6-tip]# perf record -R -a -f sleep 3s ;
perf trace [ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.182 MB perf.data (~7972 samples) ]
Fatal: not an trace data file
[root@doppio linux-2.6-tip]#
That is what is expected, right? I.e. as we didn't specify any
tracepoint event via -e, it should gracefully bail out and not
SEGFAULT.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258821086-11521-3-git-send-email-acme@infradead.org>
[ Fixed the error messages some more ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We better call this routine after both the kernel and modules
are loaded, because as it was if there weren't modules it would not
be called, resulting in kernel_map->end remaining at zero, so no
map would be found and consequently the kernel symtab wouldn't
get loaded, i.e. no kernel symbols would be resolved.
Also this fixes another case, that is when we _have_ modules,
but the last map would have its ->end address not set before we
loaded its symbols, which would never happen because ->end was
not set.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258821086-11521-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
So that the user have a clearer indication about the source of
the symbols, as we only state buildid mismatches in verbose
mode, because 'perf top' would overwrite such warning anyway.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258757489-5978-6-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
E.g.:
[root@doppio linux-2.6-tip]# perf top -v --vmlinux
../build/tip/vmlinux > /dev/null build_id in vmlinux is
e96699725a47413a50c231864a8e7a8ced40a31b while expected is
18e7cc53db62a7d35e9d6f6c9ddc23017d38ee9a, ignoring it
I.e. perf top was told to use a vmlinux file that is not the one
currently running on the machine, it ignores it and falls back
to using /proc/kallsyms.
This solves many, at first, mysterious results when people have
a stale vmlinux file while keeping the default of trying to use
the vmlinux file in the current directory in things like 'perf
annotate' where the DWARF info is required and thus we can't use
just /proc/kallsyms.
Modules buildids are already being checked as of the previous
changeset in this series, because we are using the default
dso__load routine, that will look at a series of places looking
for the best file with a matching buildid, starting in the
-debuginfo directories.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258757489-5978-5-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Just like we do with the other DSOs. This also simplifies the
kernel_maps setup process, now all that the tools need to do is
to call kernel_maps__init and the maps for the modules and
kernel will be created, then, later, when
kernel_maps__find_symbol() is used, it will also call
maps__find_symbol that already checks if the symtab was loaded,
loading it if needed.
Now if one does 'perf top --hide_kernel_symbols' we won't pay
the price of loading the (many) symbols in /proc/kallsyms or
vmlinux.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258757489-5978-4-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Will be used in more places.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258757489-5978-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In the kernel we have more than one notes section, so the linker
script combines all and puts them into a ".notes" combined
section. So we need to look at both sections and also traverse
them looking at multiple GElf_Nhdr entries till we find the one
we want, with the build_id.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258757489-5978-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It should just load kernel symbols, not load the list of
modules. There are more stuff to move to other routines, but
lets do it in several steps.
End goal is to be able to defer symbol table loading till we
find a hit for that map address range. So that the kernel &
modules are handled just like all the other DSOs in the system.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258757489-5978-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Propagate the error, that, interestingly, are already handled by
all callers :-)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258649757-17554-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This time in perf_header__adds_write, propagating the do_write
error returns.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258649757-17554-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
And also don't call the constructor in it, this way it adheres
to the model the other methods follow.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258649757-17554-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
[root@doppio linux-2.6-tip]# perf record -a -f sleep 3s ; perf
buildid-list | grep vmlinux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.171 MB perf.data (~7489
samples) ] 18e7cc53db62a7d35e9d6f6c9ddc23017d38ee9a vmlinux
[root@doppio linux-2.6-tip]#
Several refactorings were needed so that we can have symmetry
between dsos__load_modules() and dsos__load_kernel(), i.e. those
functions will respectively create and add to the dsos list the
loaded modules and kernel, with its buildids, but not load its
symbols. That is something the subcomands that need will have to
call dso__load_kernel_sym(), just like we do with modules with
dsos__load_module_sym()/dso__load_module_sym().
Next csets will actually use this info to stop producing bogus
results using mismatched vmlinux and .ko files.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258582853-8579-4-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
No need for this struct and its allocations, we can just use the
->build_id member we already have in struct dso, then ask for it
to be read, and later traverse the dsos list, writing the
buildid table to the perf.data file.
As a bonus, one more die() function got killed.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258582853-8579-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we read the build_id from the DSO name to then index into
/usr/lib/debug/.buildid/DSO_BUILD_ID[0:2]/DSO_BUILD_ID[2:], we
were jumping directly to the comparision with the buildid we
already have in dso->build_id (that came from the perf.data
build_id section, collected at perf record time)
unconditionally, even if we didn't had recorded it, and
furthermore, comparing a formatted buildid with a rawbuildid, yikes.
Fix it by deleting the dso__read_build_id() function, that was
really misdesigned anyway, and do the necessary checks and
correct comparison of raw buildids.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258582853-8579-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
'perf bench mem memcpy' is a benchmark suite for measuring memcpy()
performance.
Example on a Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz:
| % perf bench mem memcpy -l 1GB
| # Running mem/memcpy benchmark...
| # Copying 1MB Bytes from 0xb7d98008 to 0xb7e99008 ...
|
| 726.216412 MB/Sec
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1258471212-30281-1-git-send-email-mitake@dcl.info.waseda.ac.jp>
[ v2: updated changelog, clarified history of builtin-bench.c ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Defer to parse_source() time allocating it.
Now we use about this much memory:
1724 root 20 0 42104 10m 940 S 0.0 0.4 0:00.23 perf
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258490282-1821-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We pre-calculate the symbol name length, then after we sort the
entries to print, calculate the biggest one and use that for the
symbol name width justification, then use the
dso->long_name->len to justificate the DSO name, deciding whether
using the short or long name depending on how much space we have
on the terminal.
IOW give as much info to the user as the terminal width allows.
Suggested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258479655-28662-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Using a two bytes hole we already had and since we also need to
calculate this strlen for fetching the buildids. We'll use it in
'perf top' to auto-adjust the output based on the terminal
width.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258479655-28662-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Compiler on ia64 rejects the "-m64" option.
Add arch specific pieces to perf.h
Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4b02d7f43514327a@agluck-desktop.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This makes it possible to build perf statically, by
performing:
make LDFLAGS=-static
Since static libraries are only searched in the order they are
specified, move library list from LDFLAGS to EXTLIBS, so that
they are put at the end of linker command line.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091029152002.GA5406@redhat.com>
[ v2: resolved conflicts ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Propagate the errors instead, the users are the ones to decide
what to do if a library call fails.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258427892-16312-4-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Propagate the errors instead, the users are the ones to decide
what to do if a library call fails.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258427892-16312-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Propagate the errors instead, the users are the ones to decide
what to do if a library call fails.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258427892-16312-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Propagate the errors instead, the users are the ones to decide
what to do if a library call fails.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258427892-16312-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Porcelain can ignore it, humans can make more sense of it.
Suggested-by: Frederic Weisbecker <fweisbec@gmail.com>
Suggested-by: Ingo Molnar <mingo@elte.hu>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258415125-15019-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Default continues to be showing all symbols. 'K' and 'U' can be
used to toggle showing kernel and user symbols.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258415125-15019-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
By querying the current number of rows, if the user specifies
the number of entries, use that instead. If the user uses the
'e' command to change the number of lines 0 will mean do it
automatically, any other number disables the auto resizing.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258407027-384-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We really should propagate such kinds of errors so that users of
these library functions decide what to do in such cases instead
of exiting in random places like now.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258407027-384-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
With this we can list the buildids in a perf.data file so that
we can pipe them to other, distro specific tools that from the
buildids can figure out separate packages (foo-debuginfo) where
we can find the matching symtabs so that perf report can do its
job.
E.g:
[acme@doppio linux-2.6-tip]$ perf buildid-list | head -5
8e08b117e5458ad3f85da16d42d0fc5cd21c5869
520c2387a587cc5acfcf881e27dba1caaeab4b1f
ec8dd400904ddfcac8b1c343263a790f977159dc
7caedbca5a6d8ab39a7fe44bd28c07d3e14a3f3f
379bb828fd08859dbea73279f04abefabc95a6a3
[acme@doppio linux-2.6-tip]$ perf buildid-list -v | head -5
8e08b117e5458ad3f85da16d42d0fc5cd21c5869 /sbin/init
520c2387a587cc5acfcf881e27dba1caaeab4b1f /lib64/ld-2.10.1.so
ec8dd400904ddfcac8b1c343263a790f977159dc /lib64/libc-2.10.1.so
7caedbca5a6d8ab39a7fe44bd28c07d3e14a3f3f /sbin/udevd
379bb828fd08859dbea73279f04abefabc95a6a3 /lib64/libdl-2.10.1.so
[acme@doppio linux-2.6-tip]$
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258396365-29217-5-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
To print the buildids in the list of dsos. Will be used by 'perf
buildid-list'
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258396365-29217-4-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Renaming it to perf_header__process_sections() and passing a
callback to handle each feature.
The next changesets will introduce 'perf buildid-list' that will
handle just the HEADER_BUILD_ID table, ignoring all the other
features.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258396365-29217-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We need to pass the symbol to the filter so that, for instance,
'perf top' can do filtering and also set the private area it
manages, setting the ->map pointer, etc.
I found this while running 'perf top' on a machine where hits
happened on PLT symbols, where ->map wasn't being set up and
segfaults thus happened.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258386491-20278-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The ratio between the number of events and the time elapsed makes
sense only if task-clock event is counted. Otherwise it will be
simply a (confusing)
# 0.000 M/sec
This patch outputs the ratio only if task-clock event is counted.
Some test examples of before and after:
Before:
[lucas@skywalker linux.trees.git]$ sudo perf stat -e branch-misses -a -- sleep 1
Performance counter stats for 'sleep 1':
1367818 branch-misses # 0.000 M/sec
1.001494325 seconds time elapsed
After (without task-clock):
[lucas@skywalker perf]$ sudo ./perf stat -e branch-misses -a -- sleep 1
Performance counter stats for 'sleep 1':
1135044 branch-misses
1.001370775 seconds time elapsed
After (with task-clock):
[lucas@skywalker perf]$ sudo ./perf stat -e branch-misses -e task-clock -a -- sleep 1
Performance counter stats for 'sleep 1':
1070111 branch-misses # 0.534 M/sec
2002.730893 task-clock-msecs # 1.999 CPUs
1.001640292 seconds time elapsed
Signed-off-by: Lucas De Marchi <lucas.de.marchi@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091115140507.GB21561@skywalker.lan>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch modifies util/string.[ch] to add new function:
perf_atoll() to parse string representing size in bytes.
This function parses (\d+)(b|B|kb|KB|mb|MB|gb|GB) (e.g. "256MB")
and returns its numeric value. (e.g. 268435456)
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1258285013-4759-1-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Some architectures (e.g. Alpha) do not support the
-fstack-protector-all compiler option and the use of the option
with -Werror causes the compiler to abort and the build fails.
Test that the compiler supports -fstack-protector-all before
inclusion in CFLAGS.
Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091111074302.GA3728@omega>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Build a set of section headers for features right after the
datas. Each implemented feature will have one of such section
header that provides the offset and the size of the data
manipulated by the feature.
The trace informations have moved after the data and are
recorded on exit time.
The new layout is as follows:
-----------------------
___
[ magic ] |
[ header size ] |
[ attr size ] |
[ attr content offset ] |
[ attr content size ] |
[ data offset ] File Headers
[ data size ] |
[ event_types offset ] |
[ event_types size ] |
[ feature bitmap ] v
[ attr section ]
[ events section ]
___
[ X ] |
[ X ] |
[ X ] Datas
[ X ] |
[ X ] v
___
[ Feature 1 offset ] |
[ Feature 1 size ] Features headers
[ Feature 2 offset ] |
[ Feature 2 size ] v
[ Feature 1 content ]
[ Feature 2 content ]
-----------------------
We have as many feature's section headers as we have features in
use for the current file.
Say Feat 1 and Feat 3 are used by the file, but not Feat 2. Then
the feature headers will be like follows:
[ Feature 1 offset ] |
[ Feature 1 size ] Features headers
[ Feature 3 offset ] |
[ Feature 3 size ] v
There is no hole to cover Feature 2 that is not in use here. We
only need to cover the needed headers in order, from the lowest
feature bit to the highest.
Currently we have two features: HEADER_TRACE_INFO and
HEADER_BUILD_ID. Both have their contents that follow the
feature headers. Putting the contents right after the feature
headers is not mandatory though. While we keep the feature
headers right after the data and in order, their offsets can
point everywhere. We have just put the two above feature
contents in the end of the file for convenience.
The purpose of this layout change is to have a file format that
scales while keeping it simple: having such linear feature
headers is less error prone wrt forward/backward compatibility
as the content of a feature can be put anywhere, its location
can even change by the time, it's fine because its headers will
tell where it is. And we know how to find these headers,
following the above rules.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
LKML-Reference: <1257911467-28276-6-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
And drop the alternate checks/sets using set_bit or other kind
of helpers.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
LKML-Reference: <1257911467-28276-5-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Keep the build-ids reading implementation in the data mapping
but move its call to the headers so that we have a better
control on it (offset seeking, size passing, etc..).
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
LKML-Reference: <1257911467-28276-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We are saving the build id once we stop the profiling. And only
after doing that we know if we need to set that feature in the
header through the feature bitmap.
But if we want a proper feature support in the headers, using a
rule of offset/size pairs in sections, we need to know in
advance how many features we need to set in the headers, so that
we can reserve rooms for their section headers.
The current state doesn't allow that, as it forces us to first
save the build-ids to the file right after the datas instead of
planning any structured layout.
That's why this splits up the build-ids processing in two parts:
one that fetches the build-ids from the Dso objects, and one
that saves them into the file.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
LKML-Reference: <1257911467-28276-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
So that it makes easier to control it. Especially because we
plan to give it a feature section.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
LKML-Reference: <1257911467-28276-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Don't forget to also synthetize the targeted process from perf
record or we'll miss its dso in the events and then we won't be
able to deal with its build-id.
We are missing it because it is created after the existing
synthetized tasks but before the counters are enabled and can
send its mapping event.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
LKML-Reference: <1257911467-28276-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch improves sched-message.c with more comfortable output.
Change points are comment style description and
formatting numerical values and its units.
Example:
| % perf bench sched messaging
| # Running sched/messaging benchmark...
| # 20 sender and receiver processes per group
| # 10 groups == 400 processes run
|
| Total time: 1.490 [sec]
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1257865442-20252-4-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
This patch makes output of perf bench more friendly.
Current style of putput, keeping user wait
and printing everything suddenly when we finish,
may confuse users.
So I improved it:
| % perf bench sched messaging
| # Running sched/messaging benchmark... <- printed right after invocation
| # 20 sender and receiver processes per group
| # 10 groups == 400 processes run
|
| Total time: 1.476 [sec]
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1257865442-20252-2-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch modifies command-list.txt for the entry of
perf-bench. So perf will show 'bench' in command list.
Example:
% perf
usage: perf [--version] [--help] COMMAND [ARGS]
The most commonly used perf commands are:
annotate Read perf.data (created by perf record) and display annotated code
bench General framework for benchmark suites
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
list List all symbolic event types
probe Define new dynamic tracepoints
record Run a command and record its profile into perf.data
report Read perf.data (created by perf record) and display the profile
sched Tool to trace/measure scheduler properties (latencies)
stat Run a command and gather performance counter statistics
timechart Tool to visualize total system behavior during a workload
top System profiling tool.
trace Read perf.data (created by perf record) and display trace output
See 'perf help COMMAND' for more information on a specific command.
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1257853855-28934-4-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds new document about perf-bench.
Man page and html will be provided for user.
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1257853855-28934-3-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Clean up initializers in bench.h:
- No need to break the line for function prototypes, they are more
readable in a single line. (even if checkpatch complains about it
- We try to align definitions / structure fields vertically,
to make it all a bit more readable.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1257853855-28934-2-git-send-email-mitake@dcl.info.waseda.ac.jp>
This patch modifies builtin-pipe.c for processing common
options. The first option added is "--format".
Users of perf bench will be able to specify output style by
--format.
Usage example:
% ./perf bench sched pipe # with no style specify
(executing 1000000 pipe operations between two tasks)
Total time:5.855 sec
5.855061 usecs/op
170792 ops/sec
% ./perf bench --format=simple sched pipe # specified simple
5.988
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1257808802-9420-5-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
This patch modifies builtin-bench.c for processing common
options. The first option added is "--format".
Users of perf bench will be able to specify output style by
--format.
Usage example:
% ./perf bench sched messaging # with no style specify
(20 sender and receiver processes per group)
(10 groups == 400 processes run)
Total time:1.431 sec
% ./perf bench --format=simple sched messaging # specified
simple 1.431
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1257808802-9420-3-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds some constants and extern declaration to
bench.h. These are used for unified output formatting
of 'perf bench'.
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1257808802-9420-2-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo reported this small 'perf bench sched pipe' output problem:
| $ ./perf bench sched pipe
| (executing 1000000 pipe operations between two tasks)
|
| Total time:4.898 sec
| $ 4.898586 usecs/op
| 204140 ops/sec
|
| the shell prompt came back before the usecs/op and ops/sec line
| was printed. Process teardown race, lack of wait() or so?
This caused by lack of calling waitpid() by parent process,
so I added it.
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>
LKML-Reference: <1257737465-7546-1-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
modify perf.c get_debugfs_mntpnt() to use the util/debugfs.c
debugfs_find_mountpoint()
modify util/parse-events.c to use debugfs_valid_mountpoint().
Signed-off-by: Clark Williams <williams@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20091101155720.624cc87e@torg>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add routines to locate the debugfs mount point and to manage the
mounting and unmounting of the debugfs.
Signed-off-by: Clark Williams <williams@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20091101155621.2b3503ee@torg>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The perf_event_open() system call returns EACCES if the user is
not root which results in a very confusing error message:
$ perf record -A -a -f
Error: perfcounter syscall returned with -1 (Permission denied)
Fatal: No CONFIG_PERF_EVENTS=y kernel support configured?
It turns out that's because perf tools are checking only for
EPERM. Fix that up to get a much better error message:
$ perf record -A -a -f
Fatal: Permission error - are you root?
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1257696066-4046-1-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
With this change 'perf record' will intercept PERF_RECORD_MMAP
calls, creating a linked list of DSOs, then when the session
finishes, it will traverse this list and read the buildids,
stashing them at the end of the file and will set up a new
feature bit in the header bitmask.
'perf report' will then notice this feature and populate the
'dsos' list and set the build ids.
When reading the symtabs it will refuse to load from a file that
doesn't have the same build id. This improves the
reliability of the profiler output, as symbols and profiling
data is more guaranteed to match.
Example:
[root@doppio ~]# perf report | head
/home/acme/bin/perf with build id b1ea544ac3746e7538972548a09aadecc5753868 not found, continuing without symbols
# Samples: 2621434559
#
# Overhead Command Shared Object Symbol
# ........ ............... ............................. ......
#
7.91% init [kernel] [k] read_hpet
7.64% init [kernel] [k] mwait_idle_with_hints
7.60% swapper [kernel] [k] read_hpet
7.60% swapper [kernel] [k] mwait_idle_with_hints
3.65% init [kernel] [k] 0xffffffffa02339d9
[root@doppio ~]#
In this case the 'perf' binary was an older one, vanished,
so its symbols probably wouldn't match or would cause subtly
different (and misleading) output.
Next patches will support the kernel as well, reading the build
id notes for it and the modules from /sys.
Another patch should also introduce a new plumbing command:
'perf list-buildids'
that will then be used in porcelain that is distro specific to
fetch -debuginfo packages where such buildids are present. This
will in turn allow for one to run 'perf record' in one machine
and 'perf report' in another.
Future work on having the buildid sent directly from the kernel
in the PERF_RECORD_MMAP event is needed to close races, as the
DSO can be changed during a 'perf record' session, but this
patch at least helps with non-corner cases and current/older
kernels.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: K. Prasad <prasad@linux.vnet.ibm.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roland McGrath <roland@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1257367843-26224-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch modifies Makefile for new files related to 'bench'
subcommand. The new code is active from this point on.
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: fweisbec@gmail.com
Cc: Jiri Kosina <jkosina@suse.cz>
LKML-Reference: <1257381097-4743-8-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds bench/sched-pipe.c.
bench/sched-pipe.c is a benchmark program
to measure performance of pipe() system call.
This benchmark is based on pipe-test-1m.c by Ingo Molnar:
http://people.redhat.com/mingo/cfs-scheduler/tools/pipe-test-1m.c
Example of use:
% perf bench sched pipe
(executing 1000000 pipe operations between two tasks)
Total time:4.499 sec
4.499179 usecs/op
222262 ops/sec
% perf bench sched pipe -s -l 1000
0.015
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: fweisbec@gmail.com
Cc: Jiri Kosina <jkosina@suse.cz>
LKML-Reference: <1257381097-4743-4-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds bench/sched-messaging.c.
This benchmark measures performance of scheduler and IPC
mechanisms, and is based on hackbench by Rusty Russell.
Example of usage:
% perf bench sched messaging -g 20 -l 1000 -s
5.432 # in sec
% perf bench sched messaging # run with default
options (20 sender and receiver processes per group)
(10 groups == 400 processes run)
Total time:0.308 sec
% perf bench sched messaging -t -g 20 # # be multi-thread,
with 20 groups (20 sender and receiver threads per group)
(20 groups == 800 threads run)
Total time:0.582 sec
( Rusty is the original author of hackbench.c and he said the code is
and was under the GPLv2 so fine to be merged. )
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: fweisbec@gmail.com
Cc: Jiri Kosina <jkosina@suse.cz>
LKML-Reference: <1257381097-4743-3-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fall back to non-dwarf probe point if the probe definition may
not need dwarf analysis, when perf can't find vmlinux/debuginfo.
This might skip some inlined code of target function.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091104001229.3454.63987.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
So that we can run it without having a DSO instance.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1257291970-8208-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
tools/perf/Makefile
Merge reason: Resolve the conflict, merge to upstream and merge in
perf fixes so we can add a dependent patch.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Brown paper bag bug introduced in:
66bd8424cc ("perf tools: Delay
loading symtabs till we hit a map with it")
Without this we were not loading any symtabs that happened to be
on a DSO for which the allocated memory for ->loaded was !0.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1257270738-5669-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Annotate away this false positive warning on older GCCs:
cc1: warnings being treated as errors
builtin-probe.c: In function ‘parse_probe_event’:
builtin-probe.c:72: warning: ‘nc’ is used uninitialized in this function
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
LKML-Reference: <1257254947-16789-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix:
util/map.c: In function ‘map__find_symbol’:
util/map.c:97: error: field precision should have type ‘int’, but argument 3 has type ‘size_t’
Also clean up some line wrap damage - we dont line-wrap printk
messages.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256927305-4628-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Instead of:
no symbols found in /usr/lib/gstreamer-0.10/libgsttypefindfunctions.so (deleted), maybe install a debug package?
no symbols found in /usr/lib/gstreamer-0.10/libgstaudioconvert.so (deleted), maybe install a debug package?
We now emit:
/usr/lib/gstreamer-0.10/libgsttypefindfunctions.so was updated, restart the long running apps that use it!
/usr/lib/gstreamer-0.10/libgstaudioconvert.so was updated, restart the long running apps that use it!
Which is far less misleading about what the cause of the
symbol mismatch is.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256927305-4628-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Before we were storing this in the DSO, but in fact this is a
property of the 'symbol' class, not something that will vary
among DSOs, so move it to a global variable and initialize it
using the existing symbol__init routine.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256927305-4628-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add function-entry relative line number specifying support to
perf-probe. This allows users to define probes by line number
from entry of the function.
e.g.
perf probe schedule:16
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091027204319.30545.30678.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This changes probe point syntax of perf-probe as below
<SRC>[:ABS_LN] [ARGS]
or
<FUNC>[+OFFS|%return][@SRC] [ARGS]
And event name and event group name are automatically
generated based on probe-symbol and offset as below.
perfprobes/SYMBOL_OFFSET[_NUM]
Where SYMBOL is the probing symbol and OFFSET is
the byte offset from the symbol.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091027204310.30545.84984.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Exit searching after finding real (not-inlined) function,
because there should be no same symbol in that CU.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091027204252.30545.19251.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
So that we can have a quicker start on perf top and even
speedups in the other tools, as we can have maps with no hits,
so no need to load its symtabs.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256773881-4191-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add two more software events that are common to many cpus.
Alignment faults: When a load or store is not aligned properly.
Emulation faults: When an instruction is emulated in software.
Both cause a very significant slowdown (100x or worse), so identifying and
fixing them is very important.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Writing to stdout is probably the expected behavior because the
user explicitly asked for a list.
Signed-off-by: Marti Raudsepp <marti@juffo.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4ebb59420ef057972167.1256603585@localhost>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Previously no indication was given about what went wrong.
Signed-off-by: Marti Raudsepp <marti@juffo.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <03ec9ee96f17cef05424.1256603584@localhost>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Because we will need it in 'perf top' to support userspace
symbols for existing threads.
Now we pass a callback that will receive the synthesized event
and then write it to the output file in 'perf record' and in the
upcoming patch for 'perf top' we will just immediatelly create
the in memory representation of threads and maps.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256592199-9608-2-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
