Commit graph

615 commits

Author SHA1 Message Date
Dan Williams
e19d1d4988 Merge branch 'imx' into dmaengine-fixes 2011-02-14 02:40:46 -08:00
Anatolij Gustschin
a646bd7f08 dma: ipu_idmac: do not lose valid received data in the irq handler
Currently when two or more buffers are queued by the camera driver
and so the double buffering is enabled in the idmac, we lose one
frame comming from CSI since the reporting of arrival of the first
frame is deferred by the DMAIC_7_EOF interrupt handler and reporting
of the arrival of the last frame is not done at all. So when requesting
N frames from the image sensor we actually receive N - 1 frames in
user space.

The reason for this behaviour is that the DMAIC_7_EOF interrupt
handler misleadingly assumes that the CUR_BUF flag is pointing to the
buffer used by the IDMAC. Actually it is not the case since the
CUR_BUF flag will be flipped by the FSU when the FSU is sending the
<TASK>_NEW_FRM_RDY signal when new frame data is delivered by the CSI.
When sending this singal, FSU updates the DMA_CUR_BUF and the
DMA_BUFx_RDY flags: the DMA_CUR_BUF is flipped, the DMA_BUFx_RDY
is cleared, indicating that the frame data is beeing written by
the IDMAC to the pointed buffer. DMA_BUFx_RDY is supposed to be
set to the ready state again by the MCU, when it has handled the
received data. DMAIC_7_CUR_BUF flag won't be flipped here by the
IPU, so waiting for this event in the EOF interrupt handler is wrong.
Actually there is no spurious interrupt as described in the comments,
this is the valid DMAIC_7_EOF interrupt indicating reception of the
frame from CSI.

The patch removes code that waits for flipping of the DMAIC_7_CUR_BUF
flag in the DMAIC_7_EOF interrupt handler. As the comment in the
current code denotes, this waiting doesn't help anyway. As a result
of this removal the reporting of the first arrived frame is not
deferred to the time of arrival of the next frame and the drivers
software flag 'ichan->active_buffer' is in sync with DMAIC_7_CUR_BUF
flag, so the reception of all requested frames works.

This has been verified on the hardware which is triggering the
image sensor by the programmable state machine, allowing to
obtain exact number of frames. On this hardware we do not tolerate
losing frames.

This patch also removes resetting the DMA_BUFx_RDY flags of
all channels in ipu_disable_channel() since transfers on other
DMA channels might be triggered by other running tasks and the
buffers should always be ready for data sending or reception.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-02-14 02:28:16 -08:00
Sascha Hauer
60f1df5dc6 Merge branch 'dmaengine-shawn' into dmaengine 2011-01-31 12:42:51 +01:00
Sascha Hauer
2335d338a2 Merge branch 'dmaengine-sdma' into dmaengine 2011-01-31 12:42:48 +01:00
Shawn Guo
341b9419a8 dmaengine: imx-sdma: fix up param for the last BD in sdma_prep_slave_sg()
As per the reference manual, bit "L" should be set while bit "C"
should be cleared for the last buffer descriptor in the non-cyclic
chain, so that sdma can stop trying to find the next BD and end
the transfer.

In case of sdma_prep_slave_sg(), BD_LAST needs to be set and BD_CONT
be cleared for the last BD.

Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-31 12:42:23 +01:00
Shawn Guo
1e9cebb42d dmaengine: imx-sdma: correct sdmac->status in sdma_handle_channel_loop()
sdma_handle_channel_loop() is the handler of cyclic tx.  One period
success does not really mean the success of the tx.  Instead of
DMA_SUCCESS, DMA_IN_PROGRESS should be the one to tell.

Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-31 12:42:12 +01:00
Shawn Guo
8a9659114c dmaengine: imx-sdma: return sdmac->status in sdma_tx_status()
The sdmac->status was designed to reflect the status of the tx,
so simply return it in sdma_tx_status().  Then dma client can call
dma_async_is_tx_complete() to know the status of the tx.

Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-31 12:41:59 +01:00
Shawn Guo
4b2ce9ddb3 dmaengine: imx-sdma: set sdmac->status to DMA_ERROR in err_out of sdma_prep_slave_sg()
sdma_prep_dma_cyclic() sets sdmac->status to DMA_ERROR in err_out,
and sdma_prep_slave_sg() needs to do the same.  Otherwise,
sdmac->status stays at DMA_IN_PROGRESS, which will make the function
return immediately next time it gets called.

Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-31 12:41:50 +01:00
Shawn Guo
1797c33f0e dmaengine: imx-sdma: remove IMX_DMA_SG_LOOP handling in sdma_prep_slave_sg()
This is a leftover from the time that the driver did not have
sdma_prep_dma_cyclic callback and implemented sound dma as a looped
sg chain.  And it can be removed now.

Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-31 12:41:43 +01:00
Sascha Hauer
f8a356ff96 dmaengine i.MX dma: initialize dma capabilities outside channel loop
The capabilities are device specific fields, not channel specific fields.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-31 12:36:23 +01:00
Sascha Hauer
97a43dfe84 dmaengine i.MX DMA: do not initialize chan_id field
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-31 12:36:10 +01:00
Sascha Hauer
d07102a1bb dmaengine i.MX dma: check sg entries for valid addresses and lengths
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-31 12:36:02 +01:00
Sascha Hauer
1e070a6099 dmaengine i.MX dma: set maximum segment size for our device
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-31 12:35:52 +01:00
Sascha Hauer
23889c6352 dmaengine i.MX SDMA: reserve channel 0 by not registering it
We need channel 0 of the sdma engine for internal purposes. We
accomplished this by calling dma_request_channel() in the probe
function. This does not work when multiple dma engines are
present which is the case when IPU support for i.MX31/35 is
compiled in. So instead of registering channel 0 and reserving
it afterwards simply do not register it in the first place.
With this the dmaengine channel counting does not match sdma
channel counting anymore, so we have to use sdma channel counting
in the driver.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-31 12:34:31 +01:00
Sascha Hauer
7214a8b14f dmaengine i.MX SDMA: initialize dma capabilities outside channel loop
The capabilities are device specific fields, not channel specific fields.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-31 12:34:24 +01:00
Sascha Hauer
7a0e9b2557 dmaengine i.MX SDMA: do not initialize chan_id field
This is bogus as the dmaengine core will overwrite this field.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-31 12:33:18 +01:00
Sascha Hauer
1fa81c270d dmaengine i.MX sdma: check sg entries for valid addresses and lengths
This patch lets sdma_prep_slave_sg fail if the entries of an
sg list do not start on multiples of the word size or if the
lengths are not multiple of the word size.
Also, catch the previously unhandled DMA_SLAVE_BUSWIDTH_8_BYTES
and DMA_SLAVE_BUSWIDTH_UNDEFINED cases.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-31 12:33:08 +01:00
Sascha Hauer
b9b3f82f94 dmaengine i.MX sdma: set maximum segment size for our device
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-31 12:32:52 +01:00
Russell King - ARM Linux
8179661694 DMA: PL08x: fix channel pausing to timeout rather than lockup
If a transfer is initiated from memory to a peripheral, then data is
fetched and the channel is marked busy.  This busy status persists until
the HALT bit is set and the queued data has been transfered to the
peripheral.  Waiting indefinitely after setting the HALT bit results in
system lockups.  Timeout this operation, and print an error when this
happens.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30 22:03:47 -08:00
Russell King - ARM Linux
fb526210b2 DMA: PL08x: fix infinite wait when terminating transfers
If we try to pause a channel when terminating a transfer, we could end
up spinning for it to become inactive indefinitely, and can result in
an uninterruptible wait requiring a reset to recover from.

Terminating a transfer is supposed to take effect immediately, but may
result in data loss.

To make this clear, rename the function to pl08x_terminate_phy_chan().
Also, make sure it is always consistently called - with the spinlock
held and IRQs disabled, and ensure that the TC and ERR interrupt status
is always cleared.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30 22:00:48 -08:00
Shawn Guo
d718f4ebdd dmaengine: imx-sdma: fix inconsistent naming in sdma_assign_cookie()
Variable name sdma and sdmac are consistently used as the pointer to
sdma_engine and sdma_channel respectively throughout the file.  The
patch fixes the inconsistency seen in function sdma_assign_cookie().

Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-29 22:35:10 -08:00
Shawn Guo
939fd4f077 dmaengine: imx-sdma: propagate error in sdma_probe() instead of returning 0
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-29 19:34:10 -08:00
Sascha Hauer
6866fd3b72 dmaengine i.MX SDMA: Fix firmware loading
When loading the microcode to the SDMA engine we have to use
the ram_code_start_addr found in the firmware image. The copy
in the sdma engine is not initialized correctly. This is broken
since:
5b28aa3 dmaengine i.MX SDMA: Allow to run without firmware

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-29 16:14:49 -08:00
Linus Torvalds
e1288cd72f Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (63 commits)
  ARM: PL08x: cleanup comments
  Update CONFIG_MD_RAID6_PQ to CONFIG_RAID6_PQ in drivers/dma/iop-adma.c
  ARM: PL08x: fix a warning
  Fix dmaengine_submit() return type
  dmaengine: at_hdmac: fix race while monitoring channel status
  dmaengine: at_hdmac: flags located in first descriptor
  dmaengine: at_hdmac: use subsys_initcall instead of module_init
  dmaengine: at_hdmac: no need set ACK in new descriptor
  dmaengine: at_hdmac: trivial add precision to unmapping comment
  dmaengine: at_hdmac: use dma_address to program DMA hardware
  pch_dma: support new device ML7213 IOH
  ARM: PL08x: prevent dma_set_runtime_config() reconfiguring memcpy channels
  ARM: PL08x: allow dma_set_runtime_config() to return errors
  ARM: PL08x: fix locking between prepare function and submit function
  ARM: PL08x: introduce 'phychan_hold' to hold on to physical channels
  ARM: PL08x: put txd's on the pending list in pl08x_tx_submit()
  ARM: PL08x: rename 'desc_list' as 'pend_list'
  ARM: PL08x: implement unmapping of memcpy buffers
  ARM: PL08x: store prep_* flags in async_tx structure
  ARM: PL08x: shrink srcbus/dstbus in txd structure
  ...
2011-01-17 10:54:41 -08:00
Russell King - ARM Linux
94ae85220a ARM: PL08x: cleanup comments
Cleanup the formatting of comments, remove some which don't make sense
anymore.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
[fix conflict with 96a608a4]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-16 16:55:43 -08:00
Wei Yongquan
0261f74163 Update CONFIG_MD_RAID6_PQ to CONFIG_RAID6_PQ in drivers/dma/iop-adma.c
Commit f5e70d0fe3 renamed MD_RAID6_PQ to RAID6_PQ,
but iop-adma.c didn't update synchronously.

Signed-off-by: Wei Yongquan <weiyqlq@gmail.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-14 17:58:12 -08:00
Nicolas Ferre
dda36f9821 dmaengine: at_hdmac: fix race while monitoring channel status
We were reading channel status then taking a lock. This lead to a race because
this lock may delay us and then make this channel not idle anymore.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-14 16:54:44 -08:00
Nicolas Ferre
568f7f0c2e dmaengine: at_hdmac: flags located in first descriptor
Place flags on first descriptor of chain instead of last.
This is the one used by atc_chain_complete() function while unmapping.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-14 16:54:44 -08:00
Eric Xu
93d0bec2be dmaengine: at_hdmac: use subsys_initcall instead of module_init
Use subsys_initcall instead of module_init in order to keep DMA engine rolling
before other peripheral drivers.

Signed-off-by: Eric Xu <hong.xu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-14 16:54:43 -08:00
Nicolas Ferre
58344f25cf dmaengine: at_hdmac: no need set ACK in new descriptor
Following descriptor flow in at_hdmac driver, descriptor comming from
atc_desc_get() as already DMA_CTRL_ACK flag set. No need to set it again.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-14 16:54:43 -08:00
Nicolas Ferre
ebcf9b80f9 dmaengine: at_hdmac: trivial add precision to unmapping comment
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-14 16:54:43 -08:00
Nicolas Ferre
0f70e8cea3 dmaengine: at_hdmac: use dma_address to program DMA hardware
In atc_prep_slave_sg() function we use dma_address field of scatterlist with
sg_dma_address() macro instead of sg_phys(). DMA address is already computed
by dma_map_sg() or another mapping function in calling driver.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-14 16:25:58 -08:00
Tomoya MORINAGA
2cdf2455a6 pch_dma: support new device ML7213 IOH
Support new device OKI SEMICONDUCTOR's ML7213 IOH(Input/Output Hub) which is for
IVI(In-Vehicle Infotainment) use.
The ML7213 is companion chip for Intel Atom E6xx series.
The ML7213 is completely compatible for Intel EG20T PCH.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-14 16:24:53 -08:00
Linus Torvalds
008d23e485 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
  Documentation/trace/events.txt: Remove obsolete sched_signal_send.
  writeback: fix global_dirty_limits comment runtime -> real-time
  ppc: fix comment typo singal -> signal
  drivers: fix comment typo diable -> disable.
  m68k: fix comment typo diable -> disable.
  wireless: comment typo fix diable -> disable.
  media: comment typo fix diable -> disable.
  remove doc for obsolete dynamic-printk kernel-parameter
  remove extraneous 'is' from Documentation/iostats.txt
  Fix spelling milisec -> ms in snd_ps3 module parameter description
  Fix spelling mistakes in comments
  Revert conflicting V4L changes
  i7core_edac: fix typos in comments
  mm/rmap.c: fix comment
  sound, ca0106: Fix assignment to 'channel'.
  hrtimer: fix a typo in comment
  init/Kconfig: fix typo
  anon_inodes: fix wrong function name in comment
  fix comment typos concerning "consistent"
  poll: fix a typo in comment
  ...

Fix up trivial conflicts in:
 - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c)
 - fs/ext4/ext4.h

Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-13 10:05:56 -08:00
Linus Torvalds
5a62f99544 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (72 commits)
  powerpc/pseries: Fix build of topology stuff without CONFIG_NUMA
  powerpc/pseries: Fix VPHN build errors on non-SMP systems
  powerpc/83xx: add mpc8308_p1m DMA controller device-tree node
  powerpc/83xx: add DMA controller to mpc8308 device-tree node
  powerpc/512x: try to free dma descriptors in case of allocation failure
  powerpc/512x: add MPC8308 dma support
  powerpc/512x: fix the hanged dma transfer issue
  powerpc/512x: scatter/gather dma fix
  powerpc/powermac: Make auto-loading of therm_pm72 possible
  of/address: Use propper endianess in get_flags
  powerpc/pci: Use printf extension %pR for struct resource
  powerpc: Remove unnecessary casts of void ptr
  powerpc: Disable VPHN polling during a suspend operation
  powerpc/pseries: Poll VPA for topology changes and update NUMA maps
  powerpc: iommu: Add device name to iommu error printks
  powerpc: Record vma->phys_addr in ioremap()
  powerpc: Update compat_arch_ptrace
  powerpc: Fix PPC_PTRACE_SETHWDEBUG on PPC_BOOK3S
  powerpc/time: printk time stamp init not correct
  powerpc: Minor cleanups for machdep.h
  ...
2011-01-11 16:31:41 -08:00
Dan Williams
bc0fa81473 Merge branches 'amba' and 'dma40' into dmaengine 2011-01-07 12:47:05 -08:00
Guennadi Liakhovetski
661382fe19 dma: shdma: don't register the global die notifier multiple times
A recent patch has added a die notifier to the shdma driver, however,
it registers a static die-notifier object in the probe routine, i.e.,
for each device instance. This is wrong and leads to a system lockup.
This patch moves the die notifier registration to module init and
exit routines respectively.

Reported-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-07 11:03:26 +09:00
Linus Torvalds
3c0cb7c31c Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (416 commits)
  ARM: DMA: add support for DMA debugging
  ARM: PL011: add DMA burst threshold support for ST variants
  ARM: PL011: Add support for transmit DMA
  ARM: PL011: Ensure IRQs are disabled in UART interrupt handler
  ARM: PL011: Separate hardware FIFO size from TTY FIFO size
  ARM: PL011: Allow better handling of vendor data
  ARM: PL011: Ensure error flags are clear at startup
  ARM: PL011: include revision number in boot-time port printk
  ARM: vexpress: add sched_clock() for Versatile Express
  ARM i.MX53: Make MX53 EVK bootable
  ARM i.MX53: Some bug fix about MX53 MSL code
  ARM: 6607/1: sa1100: Update platform device registration
  ARM: 6606/1: sa1100: Fix platform device registration
  ARM i.MX51: rename IPU irqs
  ARM i.MX51: Add ipu clock support
  ARM: imx/mx27_3ds: Add PMIC support
  ARM: DMA: Replace page_to_dma()/dma_to_page() with pfn_to_dma()/dma_to_pfn()
  mx51: fix usb clock support
  MX51: Add support for usb host 2
  arch/arm/plat-mxc/ehci.c: fix errors/typos
  ...
2011-01-06 16:50:35 -08:00
Russell King
404a02cbd2 Merge branch 'devel-stable' into devel
Conflicts:
	arch/arm/mach-pxa/clock.c
	arch/arm/mach-pxa/clock.h
2011-01-06 22:33:32 +00:00
Paul Mundt
f862f904d3 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 into sh-latest
Conflicts:
	arch/sh/kernel/cpu/sh2a/clock-sh7201.c

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-06 18:24:07 +09:00
Russell King
1051b9f0f9 Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel-stable 2011-01-05 10:23:38 +00:00
Russell King - ARM Linux
b7f7586592 ARM: PL08x: prevent dma_set_runtime_config() reconfiguring memcpy channels
Prevent dma_set_runtime_config() being used to alter the configuration
supplied by the platform for memcpy channel configuration.  No one
should be trying to change this configuration.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-04 19:16:14 -08:00
Russell King - ARM Linux
f0fd944625 ARM: PL08x: allow dma_set_runtime_config() to return errors
There are cases in dma_set_runtime_config() where we fail to perform
the requested action - and we just issue a KERN_ERR message in that
case.  We have the facility to return an error to the caller, so that
is what we should do.

When we encounter an error due to invalid parameters, we should not
modify driver state.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-04 19:16:14 -08:00
Russell King - ARM Linux
c370e594ef ARM: PL08x: fix locking between prepare function and submit function
The PL08x driver holds on to the channel lock with interrupts disabled
between the prepare and the subsequent submit API functions.  This
means that the locking state when the prepare function returns is
dependent on whether it suceeeds or not.

It did this to ensure that the physical channel wasn't released, and
as it used to add the descriptor onto the pending list at prepare time
rather than submit time.

Now that we have reorganized the code to remove those reasons, we can
now safely release the spinlock at the end of preparation and reacquire
it in our submit function.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-04 19:16:14 -08:00
Russell King - ARM Linux
8087aacda0 ARM: PL08x: introduce 'phychan_hold' to hold on to physical channels
Introduce 'phychan_hold' to hold on to physical DMA channels while we're
preparing a new descriptor for it.  This will be incremented when we
allocate a physical channel and set the MUX registers during the
preparation of the TXD, and will only be decremented when the TXD is
submitted.

This prevents the physical channel being given up before the new TXD
is placed on the queue.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-04 19:16:14 -08:00
Russell King - ARM Linux
501e67e82d ARM: PL08x: put txd's on the pending list in pl08x_tx_submit()
Don't place TXDs on the pending list when they're prepared - place
them on the list when they're ready to be submitted.  Also, only
place memcpy requests in the wait state when they're submitted and
don't have a physical channel associated.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-04 19:16:14 -08:00
Russell King - ARM Linux
15c17232fb ARM: PL08x: rename 'desc_list' as 'pend_list'
This 'desc_list' is actually a list of pending descriptors, so name
it after its function (pending list) rather than what it contains
(descriptors).

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-04 19:16:14 -08:00
Russell King - ARM Linux
3d992e1a6f ARM: PL08x: implement unmapping of memcpy buffers
The DMA engine API requires DMA engine implementations to unmap buffers
passed into the non-slave DMA methods unless the relevant completion
flag is set.  We aren't doing this, so implement this facility.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-04 19:16:14 -08:00
Russell King - ARM Linux
c04287948e ARM: PL08x: store prep_* flags in async_tx structure
Like other DMA engine drivers do, store the passed flags into the
async_tx structure, so they can be checked when the operation
completes.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-04 19:16:13 -08:00
Russell King - ARM Linux
d7244e9a27 ARM: PL08x: shrink srcbus/dstbus in txd structure
We only need to store the dma address.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-04 19:16:13 -08:00