Commit graph

90 commits

Author SHA1 Message Date
Theodore Ts'o
4862fd6047 jbd2: remove jbd2_dev_to_name() from jbd2 tracepoints
Using function calls in TP_printk causes perf heartburn, so print the
MAJOR/MINOR device numbers instead.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-07-10 22:05:08 -04:00
Jan Kara
de1b794130 jbd2: Fix oops in jbd2_journal_remove_journal_head()
jbd2_journal_remove_journal_head() can oops when trying to access
journal_head returned by bh2jh(). This is caused for example by the
following race:

	TASK1					TASK2
  jbd2_journal_commit_transaction()
    ...
    processing t_forget list
      __jbd2_journal_refile_buffer(jh);
      if (!jh->b_transaction) {
        jbd_unlock_bh_state(bh);
					jbd2_journal_try_to_free_buffers()
					  jbd2_journal_grab_journal_head(bh)
					  jbd_lock_bh_state(bh)
					  __journal_try_to_free_buffer()
					  jbd2_journal_put_journal_head(jh)
        jbd2_journal_remove_journal_head(bh);

jbd2_journal_put_journal_head() in TASK2 sees that b_jcount == 0 and
buffer is not part of any transaction and thus frees journal_head
before TASK1 gets to doing so. Note that even buffer_head can be
released by try_to_free_buffers() after
jbd2_journal_put_journal_head() which adds even larger opportunity for
oops (but I didn't see this happen in reality).

Fix the problem by making transactions hold their own journal_head
reference (in b_jcount). That way we don't have to remove journal_head
explicitely via jbd2_journal_remove_journal_head() and instead just
remove journal_head when b_jcount drops to zero. The result of this is
that [__]jbd2_journal_refile_buffer(),
[__]jbd2_journal_unfile_buffer(), and
__jdb2_journal_remove_checkpoint() can free journal_head which needs
modification of a few callers. Also we have to be careful because once
journal_head is removed, buffer_head might be freed as well. So we
have to get our own buffer_head reference where it matters.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-06-13 15:38:22 -04:00
Jan Kara
bbd2be3691 jbd2: Add function jbd2_trans_will_send_data_barrier()
Provide a function which returns whether a transaction with given tid
will send a flush to the filesystem device.  The function will be used
by ext4 to detect whether fsync needs to send a separate flush or not.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-05-24 11:59:18 -04:00
Theodore Ts'o
1be2add685 jbd2: only print the debugging information for tid wraparound once
If we somehow wrap, we don't want to keep printing the warning message
over and over again.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-05-08 19:37:54 -04:00
Theodore Ts'o
deeeaf13b2 jbd2: fix fsync() tid wraparound bug
If an application program does not make any changes to the indirect
blocks or extent tree, i_datasync_tid will not get updated.  If there
are enough commits (i.e., 2**31) such that tid_geq()'s calculations
wrap, and there isn't a currently active transaction at the time of
the fdatasync() call, this can end up triggering a BUG_ON in
fs/jbd2/commit.c:

	J_ASSERT(journal->j_running_transaction != NULL);

It's pretty rare that this can happen, since it requires the use of
fdatasync() plus *very* frequent and excessive use of fsync().  But
with the right workload, it can.

We fix this by replacing the use of tid_geq() with an equality test,
since there's only one valid transaction id that we is valid for us to
wait until it is commited: namely, the currently running transaction
(if it exists).

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-05-01 18:16:26 -04:00
Linus Torvalds
a97b52022a Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix data corruption regression by reverting commit 6de9843dab
  ext4: Allow indirect-block file to grow the file size to max file size
  ext4: allow an active handle to be started when freezing
  ext4: sync the directory inode in ext4_sync_parent()
  ext4: init timer earlier to avoid a kernel panic in __save_error_info
  jbd2: fix potential memory leak on transaction commit
  ext4: fix a double free in ext4_register_li_request
  ext4: fix credits computing for indirect mapped files
  ext4: remove unnecessary [cm]time update of quota file
  jbd2: move bdget out of critical section
2011-04-11 15:45:47 -07:00
Zhu Yanhai
50f689af01 jbd2: move bdget out of critical section
bdget() should not be called when we hold spinlocks since
it might sleep.

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Zhu Yanhai <gaoyang.zyh@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-04-04 12:58:12 -04:00
Lucas De Marchi
25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Justin P. Mattock
3c26bdb423 jbd: Remove one to many n's in a word.
The Patch below removes one to many "n's" in a word..

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: linux-ext4@vger.kernel.org
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
2011-02-28 21:55:58 +01:00
Theodore Ts'o
e447183180 jbd2: call __jbd2_log_start_commit with j_state_lock write locked
On an SMP ARM system running ext4, I've received a report that the
first J_ASSERT in jbd2_journal_commit_transaction has been triggering:

	J_ASSERT(journal->j_running_transaction != NULL);

While investigating possible causes for this problem, I noticed that
__jbd2_log_start_commit() is getting called with j_state_lock only
read-locked, in spite of the fact that it's possible for it might
j_commit_request.  Fix this by grabbing the necessary information so
we can test to see if we need to start a new transaction before
dropping the read lock, and then calling jbd2_log_start_commit() which
will grab the write lock.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-02-12 08:18:24 -05:00
Theodore Ts'o
8aefcd557d ext4: dynamically allocate the jbd2_inode in ext4_inode_info as necessary
Replace the jbd2_inode structure (which is 48 bytes) with a pointer
and only allocate the jbd2_inode when it is needed --- that is, when
the file system has a journal present and the inode has been opened
for writing.  This allows us to further slim down the ext4_inode_info
structure.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-10 12:29:43 -05:00
Theodore Ts'o
b7271b0a39 jbd2: simplify return path of journal_init_common
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-12-18 13:39:38 -05:00
Theodore Ts'o
670be5a78a jbd2: Use pr_notice_ratelimited() in journal_alloc_journal_head()
We had an open-coded version of printk_ratelimited(); use the provided
abstraction to make the code cleaner and easier to understand.

Based on a similar patch for fs/jbd from Namhyung Kim <namhyung@gmail.com>

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-12-17 10:44:16 -05:00
yangsheng
0587aa3d11 jbd2: fix /proc/fs/jbd2/<dev> when using an external journal
In jbd2_journal_init_dev(), we need make sure the journal structure is
fully initialzied before calling jbd2_stats_proc_init().

Reviewed-by: Andreas Dilger <andreas.dilger@oracle.com>
Signed-off-by: yangsheng <sheng.yang@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-11-17 21:46:26 -05:00
Thomas Gleixner
51dfacdef3 jbd2: Convert jbd2_slab_create_sem to mutex
jbd2_slab_create_sem is used as a mutex, so make it one.

[ akpm muttered: We may as well make it local to
jbd2_journal_create_slab() also. ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <alpine.LFD.2.00.1010162231480.2496@localhost6.localdomain6>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-10-30 12:12:50 +02:00
Linus Torvalds
81280572ca Merge branch 'upstream-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'upstream-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (50 commits)
  ext4,jbd2: convert tracepoints to use major/minor numbers
  ext4: optimize orphan_list handling for ext4_setattr
  ext4: fix unbalanced mutex unlock in error path of ext4_li_request_new
  ext4: fix compile error in ext4_fallocate()
  ext4: move ext4_mb_{get,put}_buddy_cache_lock and make them static
  ext4: rename mark_bitmap_end() to ext4_mark_bitmap_end()
  ext4: move flush_completed_IO to fs/ext4/fsync.c and make it static
  ext4: rename {ext,idx}_pblock and inline small extent functions
  ext4: make various ext4 functions be static
  ext4: rename {exit,init}_ext4_*() to ext4_{exit,init}_*()
  ext4: fix kernel oops if the journal superblock has a non-zero j_errno
  ext4: update writeback_index based on last page scanned
  ext4: implement writeback livelock avoidance using page tagging
  ext4: tidy up a void argument in inode.c
  ext4: add batched_discard into ext4 feature list
  ext4: Add batched discard support for ext4
  fs: Add FITRIM ioctl
  ext4: Use return value from sb_issue_discard()
  ext4: Check return value of sb_getblk() and friends
  ext4: use bio layer instead of buffer layer in mpage_da_submit_io
  ...
2010-10-27 21:54:31 -07:00
Theodore Ts'o
a107e5a3a4 Merge branch 'next' into upstream-merge
Conflicts:
	fs/ext4/inode.c
	fs/ext4/mballoc.c
	include/trace/events/ext4.h
2010-10-27 23:44:47 -04:00
Linus Torvalds
7d2f280e75 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (24 commits)
  quota: Fix possible oops in __dquot_initialize()
  ext3: Update kernel-doc comments
  jbd/2: fixed typos
  ext2: fixed typo.
  ext3: Fix debug messages in ext3_group_extend()
  jbd: Convert atomic_inc() to get_bh()
  ext3: Remove misplaced BUFFER_TRACE() in ext3_truncate()
  jbd: Fix debug message in do_get_write_access()
  jbd: Check return value of __getblk()
  ext3: Use DIV_ROUND_UP() on group desc block counting
  ext3: Return proper error code on ext3_fill_super()
  ext3: Remove unnecessary casts on bh->b_data
  ext3: Cleanup ext3_setup_super()
  quota: Fix issuing of warnings from dquot_transfer
  quota: fix dquot_disable vs dquot_transfer race v2
  jbd: Convert bitops to buffer fns
  ext3/jbd: Avoid WARN() messages when failing to write the superblock
  jbd: Use offset_in_page() instead of manual calculation
  jbd: Remove unnecessary goto statement
  jbd: Use printk_ratelimited() in journal_alloc_journal_head()
  ...
2010-10-27 20:13:18 -07:00
Brian King
39e3ac2599 jbd2: Fix I/O hang in jbd2_journal_release_jbd_inode
This fixes a hang seen in jbd2_journal_release_jbd_inode
on a lot of Power 6 systems running with ext4. When we get
in the hung state, all I/O to the disk in question gets blocked
where we stay indefinitely. Looking at the task list, I can see
we are stuck in jbd2_journal_release_jbd_inode waiting on a
wake up. I added some debug code to detect this scenario and
dump additional data if we were stuck in jbd2_journal_release_jbd_inode
for longer than 30 minutes. When it hit, I was able to see that
i_flags was 0, suggesting we missed the wake up.

This patch changes i_flags to be an unsigned long, uses bit operators
to access it, and adds barriers around the accesses. Prior to applying
this patch, we were regularly hitting this hang on numerous systems
in our test environment. After applying the patch, the hangs no longer
occur.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:25:12 -04:00
Andrea Gelmini
bcf3d0bcff jbd/2: fixed typos
"wakup"

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-10-28 01:30:05 +02:00
Patrick J. LoPresti
1113e1b504 JBD2: Allow feature checks before journal recovery
Before we start accessing a huge (> 16 TiB) OCFS2 volume, we need to
confirm that its journal supports 64-bit offsets.  In particular, we
need to check the journal's feature bits before recovering the journal.

This is not possible with JBD2 at present, because the journal
superblock (where the feature bits reside) is not loaded from disk until
the journal is recovered.

This patch loads the journal superblock in
jbd2_journal_check_used_features() if it has not already been loaded,
allowing us to check the feature bits before journal recovery.

Signed-off-by: Patrick LoPresti <lopresti@gmail.com>
Cc: linux-ext4@vger.kernel.org
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-09-10 08:41:54 -07:00
Christoph Hellwig
9cb569d601 remove SWRITE* I/O types
These flags aren't real I/O types, but tell ll_rw_block to always
lock the buffer instead of giving up on a failed trylock.

Instead add a new write_dirty_buffer helper that implements this semantic
and use it from the existing SWRITE* callers.  Note that the ll_rw_block
code had a bug where it didn't promote WRITE_SYNC_PLUG properly, which
this patch fixes.

In the ufs code clean up the helper that used to call ll_rw_block
to mirror sync_dirty_buffer, which is the function it implements for
compound buffers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-18 01:09:01 -04:00
Linus Torvalds
09dc942c2a Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (40 commits)
  ext4: Adding error check after calling ext4_mb_regular_allocator()
  ext4: Fix dirtying of journalled buffers in data=journal mode
  ext4: re-inline ext4_rec_len_(to|from)_disk functions
  jbd2: Remove t_handle_lock from start_this_handle()
  jbd2: Change j_state_lock to be a rwlock_t
  jbd2: Use atomic variables to avoid taking t_handle_lock in jbd2_journal_stop
  ext4: Add mount options in superblock
  ext4: force block allocation on quota_off
  ext4: fix freeze deadlock under IO
  ext4: drop inode from orphan list if ext4_delete_inode() fails
  ext4: check to make make sure bd_dev is set before dereferencing it
  jbd2: Make barrier messages less scary
  ext4: don't print scary messages for allocation failures post-abort
  ext4: fix EFBIG edge case when writing to large non-extent file
  ext4: fix ext4_get_blocks references
  ext4: Always journal quota file modifications
  ext4: Fix potential memory leak in ext4_fill_super
  ext4: Don't error out the fs if the user tries to make a file too big
  ext4: allocate stripe-multiple IOs on stripe boundaries
  ext4: move aio completion after unwritten extent conversion
  ...

Fix up conflicts in fs/ext4/inode.c as per Ted.

Fix up xfs conflicts as per earlier xfs merge.
2010-08-07 13:03:53 -07:00
Theodore Ts'o
a931da6ac9 jbd2: Change j_state_lock to be a rwlock_t
Lockstat reports have shown that j_state_lock is a major source of
lock contention, especially on systems with more than 4 CPU cores.  So
change it to be a read/write spinlock.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-08-03 21:35:12 -04:00
Theodore Ts'o
47def82672 jbd2: Remove __GFP_NOFAIL from jbd2 layer
__GFP_NOFAIL is going away, so add our own retry loop.  Also add
jbd2__journal_start() and jbd2__journal_restart() which take a gfp
mask, so that file systems can optionally (re)start transaction
handles using GFP_KERNEL.  If they do this, then they need to be
prepared to handle receiving an PTR_ERR(-ENOMEM) error, and be ready
to reflect that error up to userspace.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27 11:56:05 -04:00
Jan Kara
13ceef099e jbd2/ocfs2: Fix block checksumming when a buffer is used in several transactions
OCFS2 uses t_commit trigger to compute and store checksum of the just
committed blocks. When a buffer has b_frozen_data, checksum is computed
for it instead of b_data but this can result in an old checksum being
written to the filesystem in the following scenario:

1) transaction1 is opened
2) handle1 is opened
3) journal_access(handle1, bh)
    - This sets jh->b_transaction to transaction1
4) modify(bh)
5) journal_dirty(handle1, bh)
6) handle1 is closed
7) start committing transaction1, opening transaction2
8) handle2 is opened
9) journal_access(handle2, bh)
    - This copies off b_frozen_data to make it safe for transaction1 to commit.
      jh->b_next_transaction is set to transaction2.
10) jbd2_journal_write_metadata() checksums b_frozen_data
11) the journal correctly writes b_frozen_data to the disk journal
12) handle2 is closed
    - There was no dirty call for the bh on handle2, so it is never queued for
      any more journal operation
13) Checkpointing finally happens, and it just spools the bh via normal buffer
writeback.  This will write b_data, which was never triggered on and thus
contains a wrong (old) checksum.

This patch fixes the problem by calling the trigger at the moment data is
frozen for journal commit - i.e., either when b_frozen_data is created by
do_get_write_access or just before we write a buffer to the log if
b_frozen_data does not exist. We also rename the trigger to t_frozen as
that better describes when it is called.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-07-15 15:17:47 -07:00
Andi Kleen
5a0790c2c4 ext4: remove initialized but not read variables
No real bugs found, just removed some dead code.

Found by gcc 4.6's new warnings.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-06-14 13:28:03 -04:00
Bill Pemberton
8ac97b74bc jbd2: use NULL instead of 0 when pointer is needed
Fixes sparse warning:

fs/jbd2/journal.c:1892:9: warning: Using plain integer as NULL pointer

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
CC: linux-ext4@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-11 10:04:36 +02:00
Theodore Ts'o
d2eecb0393 ext4: Use slab allocator for sub-page sized allocations
Now that the SLUB seems to be fixed so that it respects the requested
alignment, use kmem_cache_alloc() to allocator if the block size of
the buffer heads to be allocated is less than the page size.
Previously, we were using 16k page on a Power system for each buffer,
even when the file system was using 1k or 4k block size.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-12-07 10:36:20 -05:00
Andrew Morton
3ebfdf885a jbd2: don't use __GFP_NOFAIL in journal_init_common()
It triggers the warning in get_page_from_freelist(), and it isn't
appropriate to use __GFP_NOFAIL here anyway.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14843

Reported-by: Christian Casteyde <casteyde.christian@free.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-12-23 08:05:15 -05:00
Yin Kangkai
765f836190 jbd: jbd-debug and jbd2-debug should be writable
jbd-debug and jbd2-debug is currently read-only (S_IRUGO), which is not
correct. Make it writable so that we can start debuging.

Signed-off-by: Yin Kangkai <kangkai.yin@intel.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jan Kara <jack@suse.cz>
2009-12-23 13:44:13 +01:00
Theodore Ts'o
3b799d15f2 jbd2: Export jbd2_log_start_commit to fix ext4 build
This fixes:
    ERROR: "jbd2_log_start_commit" [fs/ext4/ext4.ko] undefined!

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-12-09 20:42:53 -05:00
Theodore Ts'o
e6ec116b67 jbd2: Add ENOMEM checking in and for jbd2_journal_write_metadata_buffer()
OOM happens.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-12-01 09:04:42 -05:00
Theodore Ts'o
e6a47428de jbd2: don't wipe the journal on a failed journal checksum
If there is a failed journal checksum, don't reset the journal.  This
allows for userspace programs to decide how to recover from this
situation.  It may be that ignoring the journal checksum failure might
be a better way of recovering the file system.  Once we add per-block
checksums, we can definitely do better.  Until then, a system
administrator can try backing up the file system image (or taking a
snapshot) and and trying to determine experimentally whether ignoring
the checksum failure or aborting the journal replay results in less
data loss.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
2009-11-15 15:31:37 -05:00
Tao Ma
7b02bec07e JBD/JBD2: free j_wbuf if journal init fails.
If journal init fails, we need to free j_wbuf.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2009-11-11 15:24:14 +01:00
Alexey Dobriyan
828c09509b const: constify remaining file_operations
[akpm@linux-foundation.org: fix KVM]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01 16:11:11 -07:00
Theodore Ts'o
bf6993276f jbd2: Use tracepoints for history file
The /proc/fs/jbd2/<dev>/history was maintained manually; by using
tracepoints, we can get all of the existing functionality of the /proc
file plus extra capabilities thanks to the ftrace infrastructure.  We
save memory as a bonus.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-09-30 00:32:06 -04:00
Theodore Ts'o
90576c0b9a ext4, jbd2: Drop unneeded printks at mount and unmount time
There are a number of kernel printk's which are printed when an ext4
filesystem is mounted and unmounted.  Disable them to economize space
in the system logs.  In addition, disabling the mballoc stats by
default saves a number of unneeded atomic operations for every block
allocation or deallocation.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-09-29 15:51:30 -04:00
James Morris
88e9d34c72 seq_file: constify seq_operations
Make all seq_operations structs const, to help mitigate against
revectoring user-triggerable function pointers.

This is derived from the grsecurity patch, although generated from scratch
because it's simpler than extracting the changes from there.

Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 07:39:29 -07:00
Jan Kara
f6f50e28f0 jbd2: Fail to load a journal if it is too short
Due to on disk corruption, it can happen that journal is too short. Fail
to load it in such case so that we don't oops somewhere later.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-07-17 10:40:01 -04:00
dingdinghua
96577c4382 jbd2: fix race between write_metadata_buffer and get_write_access
The function jbd2_journal_write_metadata_buffer() calls
jbd_unlock_bh_state(bh_in) too early; this could potentially allow
another thread to call get_write_access on the buffer head, modify the
data, and dirty it, and allowing the wrong data to be written into the
journal.  Fortunately, if we lose this race, the only time this will
actually cause filesystem corruption is if there is a system crash or
other unclean shutdown of the system before the next commit can take
place.

Signed-off-by: dingdinghua <dingdinghua85@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-07-13 17:55:35 -04:00
Theodore Ts'o
b574480507 jbd2: Remove GFP_ATOMIC kmalloc from inside spinlock critical region
Fix jbd2_dev_to_name(), a function used when pretty-printting jbd2 and
ext4 tracepoints.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-06-20 23:34:44 -04:00
Theodore Ts'o
879c5e6b7c jbd2: convert instrumentation from markers to tracepoints
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-06-17 11:47:48 -04:00
Alberto Bertogli
bfcd3555af jbd2: Fix minor typos in comments in fs/jbd2/journal.c
Signed-off-by: Alberto Bertogli <albertito@blitiri.com.ar>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2009-06-09 00:06:20 -04:00
Jan Kara
c88ccea314 jbd2: Fix return value of jbd2_journal_start_commit()
The function jbd2_journal_start_commit() returns 1 if either a
transaction is committing or the function has queued a transaction
commit. But it returns 0 if we raced with somebody queueing the
transaction commit as well. This resulted in ext4_sync_fs() not
functioning correctly (description from Arthur Jones): 

   In the case of a data=ordered umount with pending long symlinks
   which are delayed due to a long list of other I/O on the backing
   block device, this causes the buffer associated with the long
   symlinks to not be moved to the inode dirty list in the second
   phase of fsync_super.  Then, before they can be dirtied again,
   kjournald exits, seeing the UMOUNT flag and the dirty pages are
   never written to the backing block device, causing long symlink
   corruption and exposing new or previously freed block data to
   userspace.

This can be reproduced with a script created by Eric Sandeen
<sandeen@redhat.com>:

        #!/bin/bash

        umount /mnt/test2
        mount /dev/sdb4 /mnt/test2
        rm -f /mnt/test2/*
        dd if=/dev/zero of=/mnt/test2/bigfile bs=1M count=512
        touch /mnt/test2/thisisveryveryveryveryveryveryveryveryveryveryveryveryveryveryveryverylongfilename
        ln -s /mnt/test2/thisisveryveryveryveryveryveryveryveryveryveryveryveryveryveryveryverylongfilename
        /mnt/test2/link
        umount /mnt/test2
        mount /dev/sdb4 /mnt/test2
        ls /mnt/test2/

This patch fixes jbd2_journal_start_commit() to always return 1 when
there's a transaction committing or queued for commit.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
CC: Eric Sandeen <sandeen@redhat.com>
CC: linux-ext4@vger.kernel.org
2009-02-10 11:27:46 -05:00
Simon Holm Thøgersen
c225aa57ff ext4: fix wrong use of do_div
the following warning:

fs/jbd2/journal.c: In function ‘jbd2_seq_info_show’:
fs/jbd2/journal.c:850: warning: format ‘%lu’ expects type ‘long
unsigned int’, but argument 3 has type ‘uint32_t’

is caused by wrong usage of do_div that modifies the dividend in-place
and returns the quotient. So not only would an incorrect value be
displayed, but s->journal->j_average_commit_time would also be changed
to a wrong value!

Fix it by using div_u64 instead.

Signed-off-by: Simon Holm Thøgersen <odie@cs.aau.dk>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-01-11 22:34:01 -05:00
Linus Torvalds
2150edc6c5 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (57 commits)
  jbd2: Fix oops in jbd2_journal_init_inode() on corrupted fs
  ext4: Remove "extents" mount option
  block: Add Kconfig help which notes that ext4 needs CONFIG_LBD
  ext4: Make printk's consistently prefixed with "EXT4-fs: "
  ext4: Add sanity checks for the superblock before mounting the filesystem
  ext4: Add mount option to set kjournald's I/O priority
  jbd2: Submit writes to the journal using WRITE_SYNC
  jbd2: Add pid and journal device name to the "kjournald2 starting" message
  ext4: Add markers for better debuggability
  ext4: Remove code to create the journal inode
  ext4: provide function to release metadata pages under memory pressure
  ext3: provide function to release metadata pages under memory pressure
  add releasepage hooks to block devices which can be used by file systems
  ext4: Fix s_dirty_blocks_counter if block allocation failed with nodelalloc
  ext4: Init the complete page while building buddy cache
  ext4: Don't allow new groups to be added during block allocation
  ext4: mark the blocks/inode bitmap beyond end of group as used
  ext4: Use new buffer_head flag to check uninit group bitmaps initialization
  ext4: Fix the race between read_inode_bitmap() and ext4_new_inode()
  ext4: code cleanup
  ...
2009-01-08 17:14:59 -08:00
Jan Kara
4b905671d2 jbd2: Fix oops in jbd2_journal_init_inode() on corrupted fs
On 32-bit system with CONFIG_LBD getblk can fail because provided
block number is too big.  Add error checks so we fail gracefully if
getblk() returns NULL (which can also happen on memory allocation
failures).

Thanks to David Maciejak from Fortinet's FortiGuard Global Security
Research Team for reporting this bug.

http://bugzilla.kernel.org/show_bug.cgi?id=12370

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
cc: stable@kernel.org
2009-01-06 14:53:35 -05:00
Joel Becker
e06c8227fd jbd2: Add buffer triggers
Filesystems often to do compute intensive operation on some
metadata.  If this operation is repeated many times, it can be very
expensive.  It would be much nicer if the operation could be performed
once before a buffer goes to disk.

This adds triggers to jbd2 buffer heads.  Just before writing a metadata
buffer to the journal, jbd2 will optionally call a commit trigger associated
with the buffer.  If the journal is aborted, an abort trigger will be
called on any dirty buffers as they are dropped from pending
transactions.

ocfs2 will use this feature.

Initially I tried to come up with a more generic trigger that could be
used for non-buffer-related events like transaction completion.  It
doesn't tie nicely, because the information a buffer trigger needs
(specific to a journal_head) isn't the same as what a transaction
trigger needs (specific to a tranaction_t or perhaps journal_t).  So I
implemented a buffer set, with the understanding that
journal/transaction wide triggers should be implemented separately.

There is only one trigger set allowed per buffer.  I can't think of any
reason to attach more than one set.  Contrast this with a journal or
transaction in which multiple places may want to watch the entire
transaction separately.

The trigger sets are considered static allocation from the jbd2
perspective.  ocfs2 will just have one trigger set per block type,
setting the same set on every bh of the same type.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:30 -08:00
Theodore Ts'o
4a9bf99b20 jbd2: Add pid and journal device name to the "kjournald2 starting" message
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-01-03 22:56:44 -05:00