Commit graph

171 commits

Author SHA1 Message Date
Krzysztof Hałasa
0fd7dc7f6c IXP4xx: GTWX5715 platform only has two PCI IRQ lines, not four.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:41 +01:00
Krzysztof Hałasa
8d3fdf31dd IXP4xx: Introduce IXP4XX_GPIO_IRQ(n) macro and convert IXP4xx platform files.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:41 +01:00
Krzysztof Hałasa
a8b7b34075 IXP4xx: move Gemtek GTWX5715 platform macros to the platform code.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:40 +01:00
Krzysztof Hałasa
31bcde3785 IXP4xx: Remove unused Motorola PrPMC1100 platform macros.
PrPMC1100 is handled by IXDP425 platform code, there is no need for
duplicate set of macros. Remove them.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:40 +01:00
Krzysztof Hałasa
914e7bc28e IXP4xx: move FSG platform macros to the platform code.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:40 +01:00
Krzysztof Hałasa
395e71276c IXP4xx: move DSM G600 platform macros to the platform code.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:40 +01:00
Krzysztof Hałasa
23fa6846a2 IXP4xx: move NAS100D platform macros to the platform code.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:39 +01:00
Krzysztof Hałasa
c1117c63d5 IXP4xx: move NSLU2 platform macros to the platform code.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:39 +01:00
Krzysztof Hałasa
f89f44902a IXP4xx: move Coyote platform macros to the platform code.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:39 +01:00
Krzysztof Hałasa
ec66969685 IXP4xx: move AVILA platform macros to the platform code.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:39 +01:00
Krzysztof Hałasa
9bf4d67689 IXP4xx: move IXDP425 platform macros to the platform code.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:39 +01:00
Krzysztof Hałasa
ed5b9fa0d1 IXP4xx: Extend PCI MMIO indirect address space to 1 GB.
IXP4xx CPUs can indirectly access the whole 4 GB PCI MMIO address space (using
the non-prefetch registers). Previously the available space depended on the CPU
variant, since one of the IXP43x platforms needed more than the usual 128 MB.
1 GB should be enough for everyone, and if not, we can trivially increase it.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:39 +01:00
Krzysztof Hałasa
cba362221b IXP4xx: Fix compilation failure with CONFIG_IXP4XX_INDIRECT_PCI.
Instead of including the heavy linux/mm.h for VMALLOC_START, test the addresses
against PCI MIN and MAX addresses. Indirect PCI uses 1:1 mapping for MMIO space
making this change possible.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:39 +01:00
Krzysztof Hałasa
58e570d118 IXP4xx: Drop "__ixp4xx_" prefix from in/out/ioread/iowrite functions for clarity.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:39 +01:00
Krzysztof Hałasa
28f85cd3f6 IXP4xx: Rename indirect MMIO primitives from __ixp4xx_* to __indirect_*.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:38 +01:00
Roel Kluin
efec194f57 IXP4xx: Ensure index is positive in irq_to_gpio() and npe_request().
The indexes were signed, so negatives were possible.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:38 +01:00
Krzysztof Hałasa
9f2c94928a ARM: fix insl() and outsl() endianness on IXP4xx architecture.
The repetitive in/out functions must preserve order, not value.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:38 +01:00
Krzysztof Hałasa
6e30de84ab IXP4xx: change the timer base frequency to 66.666000 MHz.
Clock generators used by IXP4xx processors are usually 33.333 MHz, sometimes
33.33 MHz and few platforms use 33 MHz. The timers tick twice as fast,
that means 66.666, 66.66 or 66 MHz. Current 66.666666 MHz means 10 ppm
offset from the usual 66.666 MHz.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:37 +01:00
Mikael Pettersson
74c32e7234 ixp4xx: arch_idle() documentation fixup
The body of the mach-ixp4xx arch_idle() is mysteriously
disabled by an #if 0 .. #endif. Normally one would expect
to find a call to cpu_do_idle() there, but that call is
disabled, even though cpu_do_idle() is implemented for
XScale cores (and ixp4xx is one).

The explanation can be found in the ixp42x developer's manual
which states that the XScale core clock and power management
registers aren't implemented on ixp42x [3.5.2.2].

Also, the disabled code has suffered from bit rot:
- it checks hlt_counter which is obsolete, as that variable
  and all related code now is private to kernel/process.c
- it passes too many parameters to cpu_do_idle()

So this patch:
- adds a comment before the #if 0 to explain why
  cpu_do_idle() mustn't be called on ixp4xx
- removes the obsolete test of hlt_counter and the
  obsolete parameter to cpu_do_idle()

This is purely a documentation fixup and changes no
generated code. Even so, it has been tested on an
ixp420 machine (ds101).

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-09-21 19:20:03 +02:00
Mikael Pettersson
ceb69a899f ixp4xx: timer and clocks cleanups
This patch does a few simple cleanups of the ixp4xx timer
and clocksource/clockevent code in mach-ixp4xx/common.c:

- ixp4xx_clocksource_init() is static and always returns 0,
  which is ignored by its only caller: make it return void
- ixp4xx_clockevent_init(): ditto
- ixp4xx_get_cycles() is only referenced locally: make it static
- use the ixp4xx_timer_irq.dev_id field to pass &clockevent_ixp4xx
  to ixp4xx_timer_interrupt() via its dev_id parameter, allowing
  the code in ixp4xx_timer_interrupt() to be smaller and faster

Tested on an ixp420 machine (ds101).

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-09-21 19:20:03 +02:00
Linus Torvalds
d7e9660ad9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1623 commits)
  netxen: update copyright
  netxen: fix tx timeout recovery
  netxen: fix file firmware leak
  netxen: improve pci memory access
  netxen: change firmware write size
  tg3: Fix return ring size breakage
  netxen: build fix for INET=n
  cdc-phonet: autoconfigure Phonet address
  Phonet: back-end for autoconfigured addresses
  Phonet: fix netlink address dump error handling
  ipv6: Add IFA_F_DADFAILED flag
  net: Add DEVTYPE support for Ethernet based devices
  mv643xx_eth.c: remove unused txq_set_wrr()
  ucc_geth: Fix hangs after switching from full to half duplex
  ucc_geth: Rearrange some code to avoid forward declarations
  phy/marvell: Make non-aneg speed/duplex forcing work for 88E1111 PHYs
  drivers/net/phy: introduce missing kfree
  drivers/net/wan: introduce missing kfree
  net: force bridge module(s) to be GPL
  Subject: [PATCH] appletalk: Fix skb leak when ipddp interface is not loaded
  ...

Fixed up trivial conflicts:

 - arch/x86/include/asm/socket.h

   converted to <asm-generic/socket.h> in the x86 tree.  The generic
   header has the same new #define's, so that works out fine.

 - drivers/net/tun.c

   fix conflict between 89f56d1e9 ("tun: reuse struct sock fields") that
   switched over to using 'tun->socket.sk' instead of the redundantly
   available (and thus removed) 'tun->sk', and 2b980dbd ("lsm: Add hooks
   to the TUN driver") which added a new 'tun->sk' use.

   Noted in 'next' by Stephen Rothwell.
2009-09-14 10:37:28 -07:00
Krzysztof Halasa
5dbc46506a IXP42x HSS support for setting internal clock rate
HSS usually uses external clocks, so it's not a big deal. Internal clock
is used for direct DTE-DTE connections and when the DCE doesn't provide
it's own clock.

This also depends on the oscillator frequency. Intel seems to have
calculated the clock register settings for 33.33 MHz (66.66 MHz timer
base). Their settings seem quite suboptimal both in terms of average
frequency (60 ppm is unacceptable for G.703 applications, their primary
intended usage(?)) and jitter.

Many (most?) platforms use a 33.333 MHz oscillator, a 10 ppm difference
from Intel's base.

Instead of creating static tables, I've created a procedure to program
the HSS clock register. The register consists of 3 parts (A, B, C).
The average frequency (= bit rate) is:
66.66x MHz / (A  + (B + 1) / (C + 1))
The procedure aims at the closest average frequency, possibly at the
cost of increased jitter. Nobody would be able to directly drive an
unbufferred transmitter with a HSS anyway, and the frequency error is
what it really counts.

I've verified the above with an oscilloscope on IXP425. It seems IXP46x
and possibly IXP43x use a bit different clock generation algorithm - it
looks like the avg frequency is:
(on IXP465) 66.66x MHz / (A  + B / (C + 1)).
Also they use much greater precomputed A and B - on IXP425 it would
simply result in more jitter, but I don't know how does it work on
IXP46x (perhaps 3 least significant bits aren't used?).

Anyway it looks that they were aiming for exactly +60 ppm or -60 ppm,
while <1 ppm is typically possible (with a synchronized clock, of
course).

The attached patch makes it possible to set almost any bit rate
(my IXP425 533 MHz quits at > 22 Mb/s if a single port is used, and the
minimum is ca. 65 Kb/s).

This is independent of MVIP (multi-E1/T1 on one HSS) mode.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-07 01:56:49 -07:00
Mikael Pettersson
dee2b904a1 IXP4xx: Fix IO_SPACE_LIMIT for 2.6.31-rc core PCI changes
2.6.31-rc kernels don't boot on my ixp4xx box (ds101), because the libata
driver doesn't find the PCI IDE controller any more. 2.6.30 was fine.
I traced this to a PCI update (1f82de10d6)
in 2.6.30-git19. Diffing the kernel boot logs from 2.6.30-git18 and
2.6.30-git19 illustrates the breakage:

> --- dmesg-2.6.30-git18	2009-08-04 01:45:22.000000000 +0200
> +++ dmesg-2.6.30-git19	2009-08-04 01:45:46.000000000 +0200
> @@ -26,6 +26,13 @@
>  pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot
>  pci 0000:00:02.2: PME# disabled
>  PCI: bus0: Fast back to back transfers disabled
> +pci 0000:00:01.0: BAR 0: can't allocate I/O resource [0x10000-0xffff]
> +pci 0000:00:01.0: BAR 1: can't allocate I/O resource [0x10000-0xffff]
> +pci 0000:00:01.0: BAR 2: can't allocate I/O resource [0x10000-0xffff]
> +pci 0000:00:01.0: BAR 3: can't allocate I/O resource [0x10000-0xffff]
> +pci 0000:00:01.0: BAR 4: can't allocate I/O resource [0x10000-0xffff]
> +pci 0000:00:02.0: BAR 4: can't allocate I/O resource [0x10000-0xffff]
> +pci 0000:00:02.1: BAR 4: can't allocate I/O resource [0x10000-0xffff]
>  bio: create slab <bio-0> at 0
>  SCSI subsystem initialized
>  NET: Registered protocol family 2
> @@ -44,11 +51,7 @@
>  console [ttyS0] enabled
>  serial8250.0: ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale
>  Driver 'sd' needs updating - please use bus_type methods
> -PCI: enabling device 0000:00:01.0 (0140 -> 0141)
> -scsi0 : pata_artop
> -scsi1 : pata_artop
> -ata1: PATA max UDMA/100 cmd 0x1050 ctl 0x1060 bmdma 0x1040 irq 28
> -ata2: PATA max UDMA/100 cmd 0x1058 ctl 0x1064 bmdma 0x1048 irq 28
> +pata_artop 0000:00:01.0: no available native port
>  Using configured DiskOnChip probe address 0x50000000
>  DiskOnChip found at 0x50000000
>  NAND device: Manufacturer ID: 0x98, Chip ID: 0x73 (Toshiba NAND 16MiB 3,3V 8-bit)

The specific change in 1f82de10d6 responsible
for this failure turned out to be the following:

> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -193,7 +193,7 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
>  		res->flags |= pci_calc_resource_flags(l) | IORESOURCE_SIZEALIGN;
>  		if (type == pci_bar_io) {
>  			l &= PCI_BASE_ADDRESS_IO_MASK;
> -			mask = PCI_BASE_ADDRESS_IO_MASK & 0xffff;
> +			mask = PCI_BASE_ADDRESS_IO_MASK & IO_SPACE_LIMIT;
>  		} else {
>  			l &= PCI_BASE_ADDRESS_MEM_MASK;
>  			mask = (u32)PCI_BASE_ADDRESS_MEM_MASK;

Every arch except arm's ixp4xx defines IO_SPACE_LIMIT as an all-bits-one
bitmask, typically -1UL but sometimes only a 16-bit 0x0000ffff. But ixp4xx
defines it as 0xffff0000, which is now causing the PCI failures.

Russell King noted that ixp4xx has 64KB PCI IO space, so IO_SPACE_LIMIT
should be 0x0000ffff. This patch makes that change, which fixes the PCI
failures on my ixp4xx box.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-08-11 19:22:20 +02:00
Krzysztof Hałasa
9733bb8e9c IXP4xx: Change QMgr function names to qmgr_stat_*_watermark and clean the comments.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-05-25 13:25:34 +02:00
Krzysztof Hałasa
11c79740d3 IXP4xx: support for Goramo MultiLink router platform.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-05-23 23:58:30 +02:00
Krzysztof Hałasa
0771c69394 IXP42x: Use __fls() in QMgr interrupt handlers.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-05-23 23:37:04 +02:00
Krzysztof Hałasa
d4c9e9fc97 IXP42x: Add QMgr support for IXP425 rev. A0 processors.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-05-23 23:36:03 +02:00
Krzysztof Hałasa
61a5ccc85a IXP42x: add NPE support for IXP425 rev. A0 processors.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-05-23 23:16:23 +02:00
Krzysztof Hałasa
8a4fe82497 IXP42x: Identify Intel IXP425 rev. A0 processors.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-05-23 23:16:21 +02:00
Krzysztof Hałasa
a6a9fb857b IXP4xx: Add support for the second half of the 64 hardware queues.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-05-20 15:27:07 +02:00
Linus Torvalds
2ad20802b7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (26 commits)
  bonding: fix panic if initialization fails
  IXP4xx: complete Ethernet netdev setup before calling register_netdev().
  IXP4xx: use "ENODEV" instead of "ENOSYS" in module initialization.
  ipvs: Fix IPv4 FWMARK virtual services
  ipv4: Make INET_LRO a bool instead of tristate.
  net: remove stale reference to fastroute from Kconfig help text
  net: update skb_recycle_check() for hardware timestamping changes
  bnx2: Fix panic in bnx2_poll_work().
  net-sched: fix bfifo default limit
  igb: resolve panic on shutdown when SR-IOV is enabled
  wimax: oops: wimax_dev_add() is the only one that can initialize the state
  wimax: fix oops if netlink fails to add attribute
  Bluetooth: Move dev_set_name() to a context that can sleep
  netfilter: ctnetlink: fix wrong message type in user updates
  netfilter: xt_cluster: fix use of cluster match with 32 nodes
  netfilter: ip6t_ipv6header: fix match on packets ending with NEXTHDR_NONE
  netfilter: add missing linux/types.h include to xt_LED.h
  mac80211: pid, fix memory corruption
  mac80211: minstrel, fix memory corruption
  cfg80211: fix comment on regulatory hint processing
  ...
2009-05-10 10:46:45 -07:00
Krzysztof Hałasa
3ba8c79205 IXP4xx: use "ENODEV" instead of "ENOSYS" in module initialization.
ENOSYS makes modutils complain about missing kernel module support.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-05-09 14:55:52 +02:00
Magnus Damm
8e19608e8b clocksource: pass clocksource to read() callback
Pass clocksource pointer to the read() callback for clocksources.  This
allows us to share the callback between multiple instances.

[hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods]
[akpm@linux-foundation.org: cleanup]
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-21 13:41:47 -07:00
Russell King
be093beb60 [ARM] pass reboot command line to arch_reset()
OMAP wishes to pass state to the boot loader upon reboot in order to
instruct it whether to wait for USB-based reflashing or not.  There is
already a facility to do this via the reboot() syscall, except we ignore
the string passed to machine_restart().

This patch fixes things to pass this string to arch_reset().  This means
that we keep the reboot mode limited to telling the kernel _how_ to
perform the reboot which should be independent of what we request the
boot loader to do.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-19 16:20:24 +00:00
Krzysztof Hałasa
7f3ccb5a22 IXP4xx: PCI ixp4xx_scan_bus() is __devinit.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-03-17 15:01:53 +01:00
Krzysztof Hałasa
de3ce856d6 IXP4xx: cpu_is_ixp4*() now recognizes all IXP4xx processors.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-03-17 15:01:45 +01:00
Krzysztof Hałasa
5ca328d24d IXP4xx: add Ethernet and NPE support for IXP43x CPU.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-03-17 15:01:22 +01:00
Krzysztof Hałasa
0a07232ff6 IXP4xx: workaround for PCI prefetch problems near 64 MB boundary.
Map unused registers at the end of DMA region at 64 MB to allow PCI masters
to cross the boundary when prefetching data from SDRAM.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-03-17 15:00:55 +01:00
Linus Torvalds
b840d79631 Merge branch 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (66 commits)
  x86: export vector_used_by_percpu_irq
  x86: use logical apicid in x2apic_cluster's x2apic_cpu_mask_to_apicid_and()
  sched: nominate preferred wakeup cpu, fix
  x86: fix lguest used_vectors breakage, -v2
  x86: fix warning in arch/x86/kernel/io_apic.c
  sched: fix warning in kernel/sched.c
  sched: move test_sd_parent() to an SMP section of sched.h
  sched: add SD_BALANCE_NEWIDLE at MC and CPU level for sched_mc>0
  sched: activate active load balancing in new idle cpus
  sched: bias task wakeups to preferred semi-idle packages
  sched: nominate preferred wakeup cpu
  sched: favour lower logical cpu number for sched_mc balance
  sched: framework for sched_mc/smt_power_savings=N
  sched: convert BALANCE_FOR_xx_POWER to inline functions
  x86: use possible_cpus=NUM to extend the possible cpus allowed
  x86: fix cpu_mask_to_apicid_and to include cpu_online_mask
  x86: update io_apic.c to the new cpumask code
  x86: Introduce topology_core_cpumask()/topology_thread_cpumask()
  x86: xen: use smp_call_function_many()
  x86: use work_on_cpu in x86/kernel/cpu/mcheck/mce_amd_64.c
  ...

Fixed up trivial conflict in kernel/time/tick-sched.c manually
2009-01-02 11:44:09 -08:00
Linus Torvalds
14a3c4ab0e Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (407 commits)
  [ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices
  [ARM] pxafb: cleanup of the timing checking code
  [ARM] pxafb: cleanup of the color format manipulation code
  [ARM] pxafb: add palette format support for LCCR4_PAL_FOR_3
  [ARM] pxafb: add support for FBIOPAN_DISPLAY by dma braching
  [ARM] pxafb: allow pxafb_set_par() to start from arbitrary yoffset
  [ARM] pxafb: allow video memory size to be configurable
  [ARM] pxa: add document on the MFP design and how to use it
  [ARM] sa1100_wdt: don't assume CLOCK_TICK_RATE to be a constant
  [ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant
  [ARM] pxa/tavorevb: update board support (smartpanel LCD + keypad)
  [ARM] pxa: Update eseries defconfig
  [ARM] 5352/1: add w90p910-plat config file
  [ARM] s3c: S3C options should depend on PLAT_S3C
  [ARM] mv78xx0: implement GPIO and GPIO interrupt support
  [ARM] Kirkwood: implement GPIO and GPIO interrupt support
  [ARM] Orion: share GPIO IRQ handling code
  [ARM] Orion: share GPIO handling code
  [ARM] s3c: define __io using the typesafe version
  [ARM] S3C64XX: Ensure CPU_V6 is selected
  ...
2008-12-30 17:36:49 -08:00
Krzysztof Hałasa
e6da96ace8 IXP4xx: move common debugging from network drivers to QMGR module.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-22 00:48:00 +01:00
Krzysztof Hałasa
ae2754a975 IXP4xx: clear IRQ stat in qmgr_disable_irq().
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-22 00:41:50 +01:00
Krzysztof Hałasa
3edcfb2937 IXP4xx: check for queue being empty in qmgr_release_queue().
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-22 00:41:49 +01:00
Rusty Russell
320ab2b0b1 cpumask: convert struct clock_event_device to cpumask pointers.
Impact: change calling convention of existing clock_event APIs

struct clock_event_timer's cpumask field gets changed to take pointer,
as does the ->broadcast function.

Another single-patch change.  For safety, we BUG_ON() in
clockevents_register_device() if it's not set.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
2008-12-13 21:20:26 +10:30
Russell King
0560cf5aa5 [ARM] Add a common typesafe __io implementation
As Al did for Versatile in 2ad4f86b60,
add a typesafe __io implementation for platforms to use.  Convert
platforms to use this new simple typesafe implementation.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-30 11:45:54 +00:00
Russell King
dcea83adc6 [ARM] Hide ISA DMA API when ISA_DMA_API is unset
When ISA_DMA_API is unset, we're not implementing the ISA DMA API,
so there's no point in publishing the prototypes via asm/dma.h, nor
including the machine dependent parts of that API.

This allows us to remove a lot of mach/dma.h files which don't contain
any useful code.  Unfortunately though, some platforms put their own
private non-ISA definitions into mach/dma.h, so we leave these behind
and fix the appropriate #include statments.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-29 18:42:40 +00:00
Russell King
b9c78022b0 [ARM] move MAX_DMA_ADDRESS to mach/memory.h
Move the definition of MAX_DMA_ADDRESS from mach/dma.h to mach/memory.h,
thereby placing it along side its relative, ISA_DMA_THRESHOLD.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-29 10:50:22 +00:00
Russell King
4b78a9ffab [ARM] ixp4xx: clean up includes
mach/io.h doesn't need linux/mm.h.
mach/dma.h doesn't need linux/device.h, asm/page.h or mach/hardware.h

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-28 23:19:56 +00:00
Nicolas Pitre
b5ee900258 [ARM] remove a common set of __virt_to_bus definitions
Let's provide an overridable default instead of having every machine
class define __virt_to_bus and __bus_to_virt to the same thing.  What
most platforms are using is bus_addr == phys_addr so such is the default.

One exception is ebsa110 which has no DMA what so ever, so the actual
definition is not important except only for proper compilation.  Also
added a comment about the special footbridge bus translation.

Let's also remove comments alluding to set_dma_addr which is not
(and should not) be commonly used.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-28 15:36:49 +00:00
David S. Miller
a1744d3bee Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/net/wireless/p54/p54common.c
2008-10-31 00:17:34 -07:00