Commit graph

74 commits

Author SHA1 Message Date
Paul Gortmaker
e4757cab4c kconfig: delete last traces of __enabled_ from autoconf.h
We've now fixed IS_ENABLED() and friends to not require any special
"__enabled_" prefixed versions of the normal Kconfig options, so delete
the last traces of them being generated.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-12 18:35:58 -07:00
Paul Gortmaker
a959613533 Revert "kconfig: fix __enabled_ macros definition for invisible and un-selected symbols"
This reverts commit 953742c8fe.

Dumping two lines into autoconf.h for all existing Kconfig options
results in a giant file (~16k lines) we have to process each time we
compile something.  We've weaned IS_ENABLED() and similar off of
requiring the __enabled_ definitions so now we can revert the change
which caused all the extra lines.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-12 18:35:58 -07:00
Arnaud Lacombe
5d09598d48 kconfig: fix new choices being skipped upon config update
Running `oldconfig' after any of the following configuration change:

either trivial addition, such as:

config A
	bool "A"

choice
	prompt "Choice ?"
	depends on A

	config CHOICE_B
		bool "Choice B"

	config CHOICE_C
		bool "Choice C"
endchoice

or more tricky change:

OLD KCONFIG                      |  NEW KCONFIG
                                 |
                                 |  config A
                                 |          bool "A"
                                 |
choice                           |  choice
        prompt "Choice ?"        |          prompt "Choice ?"
                                 |
        config CHOICE_C          |          config CHOICE_C
                bool "Choice C"  |                  bool "Choice C"
                                 |
        config CHOICE_D          |          config CHOICE_D
                bool "Choice D"  |                  bool "Choice D"
endchoice                        |
                                 |          config CHOICE_E
                                 |                  bool "Choice E"
                                 |                  depends on A
                                 |  endchoice

will not cause the choice to be considered as NEW, and thus not be
asked. The cause of this behavior is that choice's novelty are computed
statically right after the saved configuration has been read. At this
point, the new dependency's value is still unknown and asserted to be
`no'. Moreover, no update to this decision is made afterward.

Correct this by dynamically evaluating a choice's novelty, and removing the
static evaluation.

Reported-and-tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-01-26 11:01:56 +01:00
Peter Foley
70cc01e757 kconfig: use xfwrite wrapper function to silence warnings
Use the xfwrite wrapper function defined in lkc.h to check the return value of
fwrite and silence these warnings.

  HOSTCC  scripts/kconfig/zconf.tab.o
scripts/kconfig/zconf.tab.c: In function 'header_print_comment':
/usr/src/lto/scripts/kconfig/confdata.c:551:10: warning: ignoring return value of 'fwrite', declared with attribute warn_unused_result
scripts/kconfig/zconf.tab.c: In function 'kconfig_print_comment':
/usr/src/lto/scripts/kconfig/confdata.c:467:10: warning: ignoring return value of 'fwrite', declared with attribute warn_unused_result

Signed-off-by: Peter Foley <pefoley2@verizon.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-12-18 21:54:12 +01:00
Arnaud Lacombe
953742c8fe kconfig: fix __enabled_ macros definition for invisible and un-selected symbols
__enabled_<sym-name> are only generated on visible or selected entries, do not
reflect the purpose of its introduction.

Fix this by always generating these entries for named symbol.

Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-08-29 20:19:48 -04:00
Michal Marek
2a11c8ea20 kconfig: Introduce IS_ENABLED(), IS_BUILTIN() and IS_MODULE()
Replace the config_is_*() macros with a variant that allows for grepping
for usage of CONFIG_* options in the code. Usage:

  if (IS_ENABLED(CONFIG_NUMA))

or

  #if IS_ENABLED(CONFIG_NUMA)

The IS_ENABLED() macro evaluates to 1 if the argument is set (to either 'y'
or 'm'), IS_BUILTIN() tests if the option is 'y' and IS_MODULE() test if
the option is 'm'. Only boolean and tristate options are supported.

Reviewed-by: Arnaud Lacombe <lacombar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-07-29 21:53:30 +02:00
Arnaud Lacombe
eb4cf5a642 kconfig: fix missing "0x" prefix from S_HEX symbol in autoconf.h
The specialized printer for headers (espectially autoconf.h) is missing
fixup code for S_HEX symbol's "0x" prefix. As long as kconfig does not
warn for such missing prefix, this code is needed. Fix this.

In the same time, fix some nits in `header_print_symbol()'.

Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>

Broken-by: Arnaud Lacombe <lacombar@gmail.com>
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Reported-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-07-18 16:29:29 +02:00
Arnaud Lacombe
e54e692ba6 kconfig: introduce specialized printer
Make conf_write_symbol() grammar agnostic to be able to use it from different
code path. These path pass a printer callback which will print a symbol's name
and its value in different format.

conf_write_symbol()'s job become mostly only to prepare a string for the
printer. This avoid to have to pass specialized flag to generic
functions

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
[mmarek: rebased on top of de12518 (kconfig: autogenerated config_is_xxx
macro)]
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-07-01 16:23:27 +02:00
Michal Marek
36fee53510 Merge branch 'kconfig-trivial' of git://github.com/lacombar/linux-2.6 into kbuild/kconfig 2011-06-08 18:03:57 +02:00
Arnaud Lacombe
5a6f8d2bd9 kconfig: nuke LKC_DIRECT_LINK cruft
This interface is not (and has never been ?) used by any frontend, just get rid
of it.

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-06-06 15:32:20 -04:00
Arnaud Lacombe
10a4b2772e kconfig: add missing <stdarg.h> inclusion
This header is needed when using va_{start,end,copy}(3) functions family.

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-06-06 15:32:13 -04:00
Arnaud Lacombe
75f1468bea kconfig: fix return code for invalid boolean symbol in conf_set_sym_val()
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-06-06 15:32:11 -04:00
Arnaud Lacombe
d8fc320079 kconfig: annotate non-trivial fall-trough
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-06-06 15:32:10 -04:00
Michal Marek
4c54f0f846 kconfig: Only generate config_is_xxx for bool and tristate options
For strings and integers, the config_is_xxx macros are useless and
sometimes misleading:

  #define CONFIG_INITRAMFS_SOURCE ""
  #define config_is_initramfs_source() 1

Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-25 15:26:25 +02:00
Michal Marek
51f31afd12 Merge branch 'kbuild/kconfig-for-40' into kbuild/kconfig 2011-05-24 17:16:21 +02:00
Arnaud Lacombe
bdebd4892e kconfig: do not record timestamp in .config
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-24 16:13:40 +02:00
Jean-Christophe PLAGNIOL-VILLARD
de125187dc kconfig: autogenerated config_is_xxx macro
this will allow to use to use

	if(config_is_xxx())
	if(config_is_xxx_module())

in the code instead of

	#ifdef CONFIG_xxx
	#ifdef CONFIG_xxx_MODULE

and now let the compiler remove the non usefull code and not the
pre-processor

as done in the mach-types for arm as exmaple

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-17 15:59:23 +02:00
Michal Marek
c33724a438 kconfig: Do not record timestamp in auto.conf and autoconf.h
Timestamps in file data are useless and there is already one in .config

Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-04-18 14:20:38 +02:00
Arnaud Lacombe
579fb8e741 kconfig: fix typos
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-12-15 14:42:11 +01:00
Arnaud Lacombe
0dce631092 kconfig: nuke second argument of conf_write_symbol()
Replacing S_TRISTATE by S_BOOLEAN is a no-op for conf_write_symbol().

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
[mmarek: Fix unused variable warning in conf_write()]
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-12-15 14:26:51 +01:00
Arnaud Lacombe
6e71fabe9e kconfig: do not define AUTOCONF_INCLUDED
AUTOCONF_INCLUDED is not checked is not used within the tree and its parent
header, `autoconf.h', is safe to be re-included.

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-12-15 13:38:25 +01:00
Michal Marek
70c74e59db Merge branch 'message-callback' into kbuild/kconfig
Conflicts:
	scripts/kconfig/nconf.c
2010-10-28 00:54:25 +02:00
Will Newton
1408b15b98 kconfig: Use PATH_MAX instead of 128 for path buffer sizes.
This prevents the buffers being overflowed when using a config
file with a long name. PATH_MAX is used elsewhere in the same
file, so use it here as well.

Signed-off-by: Will Newton <will.newton@imgtec.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-10-04 15:40:04 +02:00
Naohiro Aota
8bea7548ee kconfig: Don't go out from read config loop when you read new symbol
commit 8baefd30b5 of linux-next replaced
a `switch()' statement with some `if()' statements, but left `break's
in the `switch()' statement untouched. This cause read config loop to
exit and so "make oldconfig" is not much usable (see below).

> $ make oldconfig
><snip>
> scripts/kconfig/conf --oldconfig Kconfig
> #
> # using defaults found in /boot/config-2.6.34-ccs-r1
> #
> *
> * Restart config...
> *
> *
> * General setup
> *
> Prompt for development and/or incomplete code/drivers (EXPERIMENTAL) [N/y/?] (NEW)

(I've already have "CONFIG_EXPERIMENTAL=y" in the old config file. But
that's not read here.)

This patch should fix this problem.

Signed-off-by: Naohiro Aota <naota@elisp.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-09-30 21:59:32 +02:00
Arnaud Lacombe
0954828fcb kconfig: replace KERNELVERSION usage by the mainmenu's prompt
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>
2010-09-19 22:53:53 -04:00
Arnaud Lacombe
ffb5957bc4 kconfig: allow build-time definition of the internal config prefix
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>
2010-09-19 18:19:26 -04:00
Arnaud Lacombe
8baefd30b5 kconfig: replace a switch()' statement by a more flexible if()' statement
With the upcoming dynamical configuration prefix, we can no longer assume that
the prefix will start by a 'C'. As such, we can no longer hardcode this value in
the `case ...:', so replace the `switch() { ... }' statement by a more flexible
'if () { ... }' statement.

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>
2010-09-19 18:19:16 -04:00
Michal Marek
42368c37fb kconfig: Allow frontends to display messages themselves
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-17 10:21:19 +02:00
Arnaud Lacombe
94bedeca77 kbuild: confdata.c explicitly reference errno, thus need <errno.h>
This fixes:
% gmake LKC_GENPARSER=1 menuconfig
[...]
scripts/kconfig/confdata.c:739: error: 'errno' undeclared (first use in this function)
scripts/kconfig/confdata.c:739: error: (Each undeclared identifier is reported only once
scripts/kconfig/confdata.c:739: error: for each function it appears in.)
scripts/kconfig/confdata.c:739: error: 'ENOENT' undeclared (first use in this function)

triggered on NetBSD.

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-17 09:11:38 +02:00
Sam Ravnborg
84062dd3a6 kconfig: fix savedefconfig with choice marked optional
savedefconfig failed to save the correct minimal config
when it encountered a choice marked optional.

Consider following minimal configuration:
$cat Kconfig
choice
	prompt "choice"
	optional

config A
	bool "a"

config B
	bool "b"

endchoice

$cat .config | grep -v ^#
CONFIG_A=y

$conf --savedefconfig=defconfig Kconfig

would before this fix result in an empty file, because
kconfig would assume that CONFIG_A=y is a default value.
But because the choice is optional the default is that
both A and B are =n.

Fix so we handle optional choices correct.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-15 00:32:12 +02:00
Jean Sacren
bf5e327a30 kconfig: Fix warning: ignoring return value of 'fwrite'
This fix facilitates fwrite() in both confdata.c and expr.c, either it
succeeds in writing, or an error occurs, or the end of file is reached.

Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-13 00:40:26 +02:00
Sam Ravnborg
a64b44ead0 kconfig: fix tristate choice with minimal config
If a minimal config did not specify the value
of all choice values, the resulting configuration
could have wrong values.

Consider following example:
config M
        def_bool y
        option modules
choice
        prompt "choice list"
config A
        tristate "a"
config B
	tristate "b"
endchoice

With a defconfig like this:
CONFIG_M=y
CONFIG_A=y

The resulting configuration would have

    CONFIG_A=m

which was unexpected.

The problem was not not all choice values were set and thus
kconfig calculated a wrong value.

The fix is to set all choice values when we
read a defconfig files.

conf_set_all_new_symbols() is refactored such that
random choice values are now handled by a dedicated function.
And new choice values are set by set_all_choice_values().

This was not the minimal fix, but the fix that resulted
in the most readable code.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reported-by: Arve Hjønnevåg <arve@android.com>
Tested-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-12 10:55:02 +02:00
Sam Ravnborg
801690caf1 kconfig: fix savedefconfig for tristate choices
savedefconfig failed to save choice symbols equal to 'y'
for tristate choices.
This resulted in this value being lost.

In particular is fixes an issue where

	make ARCH=avr32 atngw100_defconfig
	make ARCH=avr32 savedefconfig
	cp defconfig arch/avr32/configs/atngw100_defconfig
	make ARCH=avr32 atngw100_defconfig
	diff -u .config .config.old

failed to produce an identical .config.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-12 10:55:02 +02:00
Sam Ravnborg
7cf3d73b43 kconfig: add savedefconfig
savedefconfig will save a minimal config to a file
named "defconfig".

The config symbols are saved in the same order as
they appear in the menu structure so it should
be possible to map them to the relevant menus
if desired.

The implementation was tested against several minimal
configs for arm which was created using brute-force.

There was one regression related to default numbers
which had their valid range further limited by another symbol.

Sample:

config FOO
	int "foo"
	default 4

config BAR
	int "bar"
	range 0 FOO

If FOO is set to 3 then BAR cannot take a value higher than 3.
But the current implementation will set BAR equal to 4.

This is seldomly used and the final configuration is OK,
and the fix was non-trivial.
So it was documented in the code and left as is.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-03 13:49:32 +02:00
Sam Ravnborg
49192f266f kconfig: code refactoring in confdata.c
Add a a few local functions to avoid some code duplication
No functional changes.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-03 13:49:32 +02:00
Ulf Magnusson
ac1ffde1ba kconfig: fix MODULES-related bug in case of no .config
There seems to be a kconfig bug due to MODULES not always being
evaluated if no .config is found. Take the following Kconfig as an
example:

config MODULES
	def_bool y

config FOO
	def_tristate m

With no .config, the following configuration is generated:

CONFIG_MODULES=y
CONFIG_FOO=y

With an empty .config, the following:

CONFIG_MODULES=y
CONFIG_FOO=m

Tristate choice statements can also exhibit the problem, due to having an
implicit rev_dep (select) containing "m".

The problem is that MODULES is never evaluted in conf_read_simple() unless
there's a .config. The following patch fixes this.

Signed-off-by: Ulf Magnusson <ulfalizer.lkml@gmail.com>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-29 16:56:02 +02:00
Peter Korsgaard
1244b41d00 kconfig: make randconfig fair for booleans
Give boolean symbols a 50% chance of getting enabled, rather than 67%.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-26 15:40:52 +02:00
Michal Marek
bc081dd6e9 kbuild: generate modules.builtin
To make it easier for module-init-tools and scripts like mkinitrd to
distinguish builtin and missing modules, install a modules.builtin file
listing all builtin modules. This is done by generating an additional
config file (tristate.conf) with tristate options set to uppercase 'Y'
or 'M'. If we source that config file, the builtin modules appear in
obj-Y.

Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-12 13:08:16 +01:00
Sam Ravnborg
264a268380 kbuild: move autoconf.h to include/generated
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-12 13:08:15 +01:00
Trevor Keith
4356f48907 kbuild: add static to prototypes
Warnings found via gcc -Wmissing-prototypes.

Signed-off-by: Trevor Keith <tsrk@tsrk.net>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-20 12:27:44 +02:00
Markus Heidelberg
12122f6232 kconfig: do not hardcode "include/config/auto.conf" filename
Regardless of KCONFIG_AUTOCONFIG, the filename written as a Make target
into "include/config/auto.conf.cmd" was always the default one.

Of course this doesn't make it work for the Kernel kbuild system, since
there the filename is hardcoded at several places in the Makefiles.

Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09 22:37:51 +02:00
Sam Ravnborg
184832c981 kconfig: fix randconfig for choice blocks
Ingo Molnar reported that 'make randconfig' was not covering
choice blocks properly, resulting in certain config options
being left out of randconfig testing altogether.

With the following patch we:
- properly randomize choice value for normal choice blocks
- properly randomize for multi choice blocks
- added several comments to explain what is going on

The root cause of the bug was that SYMBOL_VALID was set on the
symbol representing the choice block so clearing this did
the trick initially.
But testign revealed a few more issues that is now fixed.

Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-03-15 22:54:57 +01:00
Al Viro
ce97e13e52 fix allmodconfig breakage
If you use KCONFIG_ALLCONFIG (even with empty file) you get broken
allmodconfig/allyesconfig; CONFIG_MODULES gets turned off, with obvious
massive fallout.

Breakage had been introduced when conf_set_all_new_symbols() got used
for allmodconfig et.al.

What happens is that sym_calc_value(modules_sym) done in
conf_read_simple() sets SYMBOL_VALID on both modules_sym and MODULES.
When we get to conf_set_all_new_symbols(), we set sym->def[S_DEF_USER]
on everything, but it has no effect on sym->curr for the symbols that
already have SYMBOL_VALID - these are stuck.

Solution: use sym_clear_all_valid() in there.  Note that it makes
reevaluation of modules_sym redundant - sym_clear_all_valid() will do
that itself.

[ Fixes http://bugzilla.kernel.org/show_bug.cgi?id=11512, says Alexey ]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-26 09:35:05 -07:00
zippel@linux-m68k.org
661b0680f7 kconfig: readd lost change count
Commit f072181e64 ("kconfig: drop the
""trying to assign nonexistent symbol" warning") simply dropped the
warnings, but it does a little more than that, it also marks the current
.config as needed saving, so add this back.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-29 08:03:01 -07:00
Sam Ravnborg
f072181e64 kconfig: drop the ""trying to assign nonexistent symbol" warning
They really stand out now that make *config is less chatty - and
they are generally ignored - so drop them.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Adrian Bunk <bunk@kernel.org>
2008-08-04 22:29:37 +02:00
Roman Zippel
dc7862e5a6 kconfig: set all new symbols automatically
Add conf_set_all_new_symbols() which set all symbols (which don't have a
value yet) to a specifed value.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-07-25 22:12:48 +02:00
Roman Zippel
7a96292335 kconfig: explicitly introduce expression list
Rename E_CHOICE to E_LIST to explicitly add support for expression
lists. Add a helper macro expr_list_for_each_sym to more easily iterate
over the list.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:39 +01:00
Sam Ravnborg
d6ee35764f kconfig: rename E_OR & friends to avoid name clash
We had macros named the same as a set of enumeration values.
It is legal code but very confusing to read - so rename
the macros from E_* to EXPR_*

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28 23:14:38 +01:00
Jan Engelhardt
d84876f9f8 kconfig: allow overriding symbols
Allow config variables in .config to override earlier ones in the same
file. In other words,

	# CONFIG_SECURITY is not defined
	CONFIG_SECURITY=y

will activate it. This makes it a bit easier to do

cat original-config myconfig myconfig2 ... >.config;
and run *config as expected.

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
2008-01-28 23:14:37 +01:00
Sam Ravnborg
6840999b19 x86: simplify "make ARCH=x86" and fix kconfig all.config
Simplify "make ARCH=x86" and fix kconfig so we again can set 64BIT in
all.config.

For a fix the diffstat is nice:
 6 files changed, 3 insertions(+), 36 deletions(-)

The patch reverts these commits:
 - 0f855aa64b ("kconfig: add helper to set
   config symbol from environment variable")
 - 2a113281f5 ("kconfig: use $K64BIT to
   set 64BIT with all*config targets")

Roman Zippel pointed out that kconfig supported string compares so
the additional complexity introduced by the above two patches were
not needed.

With this patch we have following behaviour:

  # make {allno,allyes,allmod,rand}config [ARCH=...]
  option \ host arch      | 32bit         | 64bit
  =====================================================
  ./.                     | 32bit         | 64bit
  ARCH=x86                | 32bit         | 32bit
  ARCH=i386               | 32bit         | 32bit
  ARCH=x86_64             | 64bit         | 64bit

The general rule are that ARCH= and native architecture takes
precedence over the configuration.

So make ARCH=i386 [whatever] will always build a 32-bit kernel
no matter what the configuration says.  The configuration will
be updated to 32-bit if it was configured to 64-bit and the
other way around.

This behaviour is consistent with previous behaviour so no
suprises here.

make ARCH=x86 will per default result in a 32-bit kernel but as
the only ARCH= value x86 allow the user to select between 32-bit
and 64-bit using menuconfig.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andreas Herrmann <aherrman@arcor.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-17 08:35:43 -08:00