Commit graph

1875 commits

Author SHA1 Message Date
Steven Rostedt
a2de3f79b1 Blackfin: irqs: do not trace arch_local_{*,irq_*} functions
Do not trace arch_local_save_flags(), arch_local_irq_*() and friends.
Although they are marked inline, gcc may still make a function out of
them and add it to the pool of functions that are traced by the function
tracer. This can cause undesirable results (kernel panic, triple faults,
etc).

Add the notrace notation to prevent them from ever being traced.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:33 -04:00
Mike Frysinger
b0d3dc1291 Blackfin: bf526: restrict reboot workaround to 0.0 silicon
The bug in the BF526 rom when doing a software reset exists only in older
silicon versions, so don't clear SWRST on newer parts.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:33 -04:00
Mike Frysinger
65cd3b5362 Blackfin: bf51x: fix alternative portmux options
The BF51x's alternative portmux Kconfig options were copy & pasted from
the BF52x, but never tweaked to reflect it.  So drop the old options as
they were never used (and were simply wrong), and add the BF51x specific
pieces to the Kconfig and header.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:32 -04:00
Mike Frysinger
fdfb0becea Blackfin: bf54x: fix GPIO resume code
Back in commit c03c2a8734, we fixed logic in the non-bf54x
GPIO resume code to set the data levels properly before the direction
to avoid spurious line glitches.  But we missed the bf54x code paths.
So add the same fix there.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:32 -04:00
Mike Frysinger
9e770f7780 Blackfin: dpmc: optimize SDRAM programming slightly
No need to reload these registers constantly since they're always
available (we're not making any function calls in between).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:31 -04:00
Mike Frysinger
da31d6fb46 Blackfin: dpmc: don't save/restore scratch registers
The Blackfin C ABI says we do not need to save/restore R0-R3 and P0-P2
as they are available as scratch registers.  So don't bother.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:31 -04:00
Mike Frysinger
9466a0510a Blackfin: bf538: pull gpio/port logic out of core hibernate paths
Re-architect how we save/restore the gpio/port logic that only pertains
to bf538/bf539 parts by pulling it out of the core code paths and pushing
it out to bf538-specific locations.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:30 -04:00
Mike Frysinger
eed7b83658 Blackfin: dpmc: optimize hibernate/resume path
The current save logic used in hibernation is to do a MMR load (base +
offset) into a register, and then push that onto the stack.  Then when
restoring, pop off the stack into a register followed by a MMR store
(base + offset).  These use plenty of 32bit insns rather than 16bit,
are pretty long winded, and full of pipeline bubbles.

So, by taking advantage of MMRs that are contiguous, the multi-register
push/pop insn, and register abuse, we can shrink this code considerably.

When saving, the new logic does a lot of loads into the data and pointer
registers before executing a single multi-register push insn.  Then when
restoring, we do a single multi-register pop insn followed by a lot of
stores.  Overall, this allows us to cut the insn count by ~30%, the code
size by ~45%, and drastically reduce the register hazards that trigger
bubbles in the pipeline.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:29 -04:00
Mike Frysinger
d7228e7eb9 Blackfin: dpmc: do not save/restore EVT0/EVT1/EVT4 when hibernating
EVT0 is for emulation, EVT1 is for reset, and EVT4 is the "global int
disable" region.  None of these are used by software (or even hardware),
so don't bother saving/restoring them when we hibernate since nothing
ever uses these in Linux (the only thing they would be useful for is
core-memory scratch, but that's just crazy talk).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:29 -04:00
Mike Frysinger
584ecbaa25 Blackfin: dpmc: relocate hibernate helper macros
This defines only get used in the hibernate code, so remove them from the
global dpmc header as no one else cares.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:28 -04:00
Mike Frysinger
429e257ea3 Blackfin: dpmc: omit RETE/RETN when hibernating
The RETE/RETN registers are only used in emulation(JTAG) and NMI nodes,
or as scratch registers, neither of which need to be saved/restored as
this code doesn't execute at those core event levels.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:28 -04:00
Mike Frysinger
4705a25c06 Blackfin: dpmc: optimize SIC_IWR programming a little
For parts with more than one SIC_IWR, we can optimize the writing
a little bit using better Blackfin insns.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:27 -04:00
Mike Frysinger
01f8e34c98 Blackfin: gpio/ints: generalize pint logic
Have the logic that uses peripheral interrupt blocks key off of pint
defines rather than CPU names so that things are generalized across
families.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:27 -04:00
Mike Frysinger
85c2737ae7 Blackfin: dpmc: bind to MMR names and not CPUs
Have the code work off of MMR names rather than CPU defines so there is
less code to tweak in the future with new parts.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:26 -04:00
Mike Frysinger
0a7e5413ca Blackfin: debug-mmrs: generalize pint logic
Don't bind the code to specific CPU defines.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:26 -04:00
Mike Frysinger
82ed5f73ed Blackfin: bf54x: switch to common pint MMR struct
We have a struct in the headers describing the register layout, so
drop the local duplicate one.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:25 -04:00
Mike Frysinger
b69c920cb1 Blackfin: bf54x: tweak MMR pint names
The hardware block uses the name "request" rather than "irq", so update
the struct accordingly.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:25 -04:00
Mike Frysinger
b0759a4d23 Blackfin: bf54x: constify pint register array
The array of pointers to register blocks never changes, so constify it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:24 -04:00
Mike Frysinger
1a9e5bfbd4 Blackfin: gpio: punt unused GPIO_# defines
These defines don't accomplish much as GPIO_# is the same thing as #.
Each CPU already provides helpful symbolic defines like GPIO_<PIN>
which everyone uses, so just punt these # ones.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:24 -04:00
Mike Frysinger
969564508d Blackfin: convert unicode space gremlins
Not sure how these guys slipped in, but they're annoying me.
So bring these unicode space gremlins down to earth to normal
ascii spaces.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:23 -04:00
Mike Frysinger
006669ec21 Blackfin: pwm: implement linux/pwm.h API
For now, this only supports gptimers.  Support for dedicated PWM devices
as found on newer parts to come.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:23 -04:00
Mike Frysinger
e1b5596533 Blackfin: gptimers: add enable/disable by timer id
The API is geared around timer ids, except for the act of enabling
and disabling timers.  So add a small helper to fill out the gap.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:22 -04:00
Steven Miao
353470cc50 Blackfin: make sure percpu section is aligned in XIP builds
The alignment is normally handled by PERCPU(), but we need to do it
ourselves in the XIP build due to the custom layout.

Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:22 -04:00
Mike Frysinger
997f95e190 Blackfin: gptimers: use bfin read/write helpers
Use proper helper macros for reading/writing the MMRs rather than
volatile markings on the struct.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:21 -04:00
Mike Frysinger
24a6b91f69 Blackfin: gptimers: use register structs from common header
Now that asm/gptimers.h has the hardware register struct layout, there's
no need to duplicate things locally.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:21 -04:00
Mike Frysinger
af459864b3 Blackfin: debug-mmrs: use new gptimer_group layout to simplify code
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:20 -04:00
Mike Frysinger
94674b15df Blackfin: debug-mmrs: prevent macro arg from expanding
Passing a non-simple expression in as the addr arg could incorrectly
apply the pointer cast resulting in misbehavior.  Add proper paren.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:20 -04:00
Mike Frysinger
7595ac0711 Blackfin: gptimers: add group structure for hardware register layout
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:19 -04:00
Mathias Krause
a64b384818 Blackfin: exec: remove redundant set_fs(USER_DS)
The address limit is already set in flush_old_exec() so this
set_fs(USER_DS) is redundant.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:18 -04:00
Mike Frysinger
979365ba4e Blackfin: update anomaly lists to latest public info
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:18 -04:00
Mike Frysinger
4e12b08b72 Blackfin: bf561-ezkit: change parallel flash from M to Y in defconfig
These flashes are always on the board, so might as well enable them by
default rather than a module.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:17 -04:00
Mike Frysinger
e14062563c Blackfin: debug-mmrs: disable PERIPHERAL_MAP for IMDMA channels
The documentation for the IMDMA channels appears to be incorrect.
These DMA blocks don't actually have PERIPHERAL_MAP MMRs for us
to access.  Attempts to do so lead to system mmr hardware errors.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:17 -04:00
Mike Frysinger
ef0531b2e4 Blackfin: debug-mmrs: fix typo in single dmac setup
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:10:44 -04:00
Mike Frysinger
50f92aa334 Blackfin: convert to asm-generic/mutex-dec.h for all systems
The Blackfin mutex.h is merely a copy of an older asm-generic/mutex-dec.h,
so punt it and just use the common one directly.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:10:43 -04:00
Mike Frysinger
fb1d9be596 Blackfin: optimize double fault boot checking
This moves the double fault data used at boot time into a single struct
which can then easily be addressed with indexed loads rather than having
to explicitly load multiple addresses.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:10:43 -04:00
Mike Frysinger
072a5cff2f Blackfin: time: replace magic numbers with defines
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:10:42 -04:00
Mike Frysinger
b648072d3e Blackfin: SMP: optimize start up code a bit
This just imports all of the optimization work done in the
common startup code.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:10:42 -04:00
Mike Frysinger
2f7d63f909 Blackfin: boards: clean up redundant/dead spi resources
The default for the Blackfin SPI driver is 8 bits and dma disabled,
so many of the bfin5xx_spi_chip resources are redundant.  So punt
those parts.

Further, drivers should themselves be declaring 16 bit transfers,
so for those that do, and for the ones which no longer do 16 bit
transfers, drop the bfin5xx_spi_chip resources.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:10:41 -04:00
Mike Frysinger
9be8631b8a Blackfin: net2272: move pin setup to boards files
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:10:41 -04:00
Mike Frysinger
c6cb13f9fe Blackfin: convert to kbuild asm-generic support
No need for one line header stubs.  Just declare it in Kbuild.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 00:41:23 -04:00
Wanlong Gao
c7cbb02222 rtc: fix build warnings in defconfigs
RTC_CLASS is changed to bool, so 'm' is invalid.

Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-15 20:04:02 -07:00
Steven Miao
5ff6197f82 Blackfin: strncpy: fix handling of zero lengths
The jump to 4f will cause the NUL padding loop to run at least one time,
so if string length is zero just jump to the end.  Otherwise we wrongly
write one NUL byte when size==0.

Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-06-03 11:05:36 -04:00
Mike Frysinger
c320afe965 Blackfin: debug-mmrs: include RSI_PID[4567] MMRs
The documentation is a little iffy as to whether these are actual MMRs,
but reading them on the hardware works, and the previous version of this
logic (the SDH) had PID[4567].  So add it for RSI too.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-28 17:02:56 -04:00
Mike Frysinger
fcb243918f Blackfin: bf51x: fix up RSI_PID# MMR defines
Looks like the copying of MMR defines from the SDH block missed updating
the addresses of the RSI_PID# registers.  So tweak them to reflect the
actual hardware.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-28 17:02:56 -04:00
Mike Frysinger
61aa818f7b Blackfin: bf52x/bf54x: fix up usb MMR defines
The bf52x/bf54x have the incorrect addresses for USB_EP_NI7_RXINTERVAL
and USB_EP_NI7_TXCOUNT, so adjust those.

Further, the bf54x header puts the USB defines in the wrong place, so
shuffle them back to the right grouping.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-28 17:02:56 -04:00
Mike Frysinger
d09fb60203 Blackfin: debug-mmrs: fix typos with gptimers/mdma/ppi
This code was mostly developed against a BF54x, so some BF537-specific
issues were missed.

The PPI block starts at PPI_CONTROL, not PPI_STATUS (which is the reverse
of the EPPI block).

The MDMA block starts at MDMA_NEXT_DESC_PTR, not MDMA_CONFIG.  Seems the
sim does not catch misreads here so that'll need to get fixed.

The gptimer block is mostly 32bit regs, not 16bit.  Use the gptimer struct
to figure that out rather than hardcoding it locally.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-28 17:02:56 -04:00
Mike Frysinger
a4ffd95692 Blackfin: gptimers: add structure for hardware register layout
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-28 17:02:55 -04:00
Mike Frysinger
427472c967 Blackfin: wire up new sendmmsg syscall
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-28 17:02:55 -04:00
Mike Frysinger
63917efc4f Blackfin: mach/bfin_serial_5xx.h: punt now-unused header
Now that the serial code has been unified in bfin_serial.h, and the
Blackfin UART driver pushed its resources to the boards files, we
don't need these headers anymore.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-28 17:01:55 -04:00
Mike Frysinger
091c75985e Blackfin: bfin_serial.h: turn default port wrappers into stubs
Any consumer that needs to access the MMRs has to provide these helpers,
so make the default into useless stubs.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-28 17:01:55 -04:00
Linus Torvalds
c4a227d89f Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (25 commits)
  perf: Fix SIGIO handling
  perf top: Don't stop if no kernel symtab is found
  perf top: Handle kptr_restrict
  perf top: Remove unused macro
  perf events: initialize fd array to -1 instead of 0
  perf tools: Make sure kptr_restrict warnings fit 80 col terms
  perf tools: Fix build on older systems
  perf symbols: Handle /proc/sys/kernel/kptr_restrict
  perf: Remove duplicate headers
  ftrace: Add internal recursive checks
  tracing: Update btrfs's tracepoints to use u64 interface
  tracing: Add __print_symbolic_u64 to avoid warnings on 32bit machine
  ftrace: Set ops->flag to enabled even on static function tracing
  tracing: Have event with function tracer check error return
  ftrace: Have ftrace_startup() return failure code
  jump_label: Check entries limit in __jump_label_update
  ftrace/recordmcount: Avoid STT_FUNC symbols as base on ARM
  scripts/tags.sh: Add magic for trace-events for etags too
  scripts/tags.sh: Fix ctags for DEFINE_EVENT()
  x86/ftrace: Fix compiler warning in ftrace.c
  ...
2011-05-28 12:55:55 -07:00
Linus Torvalds
571503e100 Merge branch 'setns'
* setns:
  ns: Wire up the setns system call

Done as a merge to make it easier to fix up conflicts in arm due to
addition of sendmmsg system call
2011-05-28 10:51:01 -07:00
Eric W. Biederman
7b21fddd08 ns: Wire up the setns system call
32bit and 64bit on x86 are tested and working.  The rest I have looked
at closely and I can't find any problems.

setns is an easy system call to wire up.  It just takes two ints so I
don't expect any weird architecture porting problems.

While doing this I have noticed that we have some architectures that are
very slow to get new system calls.  cris seems to be the slowest where
the last system calls wired up were preadv and pwritev.  avr32 is weird
in that recvmmsg was wired up but never declared in unistd.h.  frv is
behind with perf_event_open being the last syscall wired up.  On h8300
the last system call wired up was epoll_wait.  On m32r the last system
call wired up was fallocate.  mn10300 has recvmmsg as the last system
call wired up.  The rest seem to at least have syncfs wired up which was
new in the 2.6.39.

v2: Most of the architecture support added by Daniel Lezcano <dlezcano@fr.ibm.com>
v3: ported to v2.6.36-rc4 by: Eric W. Biederman <ebiederm@xmission.com>
v4: Moved wiring up of the system call to another patch
v5: ported to v2.6.39-rc6
v6: rebased onto parisc-next and net-next to avoid syscall  conflicts.
v7: ported to Linus's latest post 2.6.39 tree.

>  arch/blackfin/include/asm/unistd.h     |    3 ++-
>  arch/blackfin/mach-common/entry.S      |    1 +
Acked-by: Mike Frysinger <vapier@gentoo.org>

Oh - ia64 wiring looks good.
Acked-by: Tony Luck <tony.luck@intel.com>

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-28 10:48:39 -07:00
Linus Torvalds
29a6ccca38 Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (97 commits)
  mtd: kill CONFIG_MTD_PARTITIONS
  mtd: remove add_mtd_partitions, add_mtd_device and friends
  mtd: convert remaining users to mtd_device_register()
  mtd: samsung onenand: convert to mtd_device_register()
  mtd: omap2 onenand: convert to mtd_device_register()
  mtd: txx9ndfmc: convert to mtd_device_register()
  mtd: tmio_nand: convert to mtd_device_register()
  mtd: socrates_nand: convert to mtd_device_register()
  mtd: sharpsl: convert to mtd_device_register()
  mtd: s3c2410 nand: convert to mtd_device_register()
  mtd: ppchameleonevb: convert to mtd_device_register()
  mtd: orion_nand: convert to mtd_device_register()
  mtd: omap2: convert to mtd_device_register()
  mtd: nomadik_nand: convert to mtd_device_register()
  mtd: ndfc: convert to mtd_device_register()
  mtd: mxc_nand: convert to mtd_device_register()
  mtd: mpc5121_nfc: convert to mtd_device_register()
  mtd: jz4740_nand: convert to mtd_device_register()
  mtd: h1910: convert to mtd_device_register()
  mtd: fsmc_nand: convert to mtd_device_register()
  ...

Fixed up trivial conflicts in
 - drivers/mtd/maps/integrator-flash.c: removed in ARM tree
 - drivers/mtd/maps/physmap.c: addition of afs partition probe type
   clashing with removal of CONFIG_MTD_PARTITIONS
2011-05-27 20:06:53 -07:00
Ingo Molnar
d6a72fe465 Merge branch 'tip/perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/urgent 2011-05-27 14:28:09 +02:00
Akinobu Mita
63e424c844 arch: remove CONFIG_GENERIC_FIND_{NEXT_BIT,BIT_LE,LAST_BIT}
By the previous style change, CONFIG_GENERIC_FIND_NEXT_BIT,
CONFIG_GENERIC_FIND_BIT_LE, and CONFIG_GENERIC_FIND_LAST_BIT are not used
to test for existence of find bitops anymore.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26 17:12:38 -07:00
Mike Frysinger
63ab25ebbc kgdbts: unify/generalize gdb breakpoint adjustment
The Blackfin arch, like the x86 arch, needs to adjust the PC manually
after a breakpoint is hit as normally this is handled by the remote gdb.
However, rather than starting another arch ifdef mess, create a common
GDB_ADJUSTS_BREAK_OFFSET define for any arch to opt-in via their kgdb.h.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Dongdong Deng <dongdong.deng@windriver.com>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26 17:12:36 -07:00
Mike Frysinger
82258c661a Blackfin: convert to asm-generic ptrace.h
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26 17:12:36 -07:00
Steven Rostedt
f29c50419c maccess,probe_kernel: Make write/read src const void *
The functions probe_kernel_write() and probe_kernel_read() do not modify
the src pointer. Allow const pointers to be passed in without the need
of a typecast.

Acked-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1305824936.1465.4.camel@gandalf.stny.rr.com
2011-05-25 19:56:23 -04:00
Linus Torvalds
ed0795aa12 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (37 commits)
  Blackfin: use new common PERCPU_INPUT define
  MAINTAINERS: Fix Analog Devices mailinglist address
  Blackfin: boards: update ASoC resources after machine driver overhaul
  Blackfin: work around anomaly 05000480
  Blackfin: fix addr type with bfin_write_{or,and} helpers
  Blackfin: convert /proc/sram to seq_file
  Blackfin: switch /proc/gpio to seq_file
  Blackfin: fix indentation with bfin_read() helper
  Blackfin: convert old cpumask API to new one
  Blackfin: don't touch task->cpus_allowed directly
  Blackfin: don't touch cpu_possible_map and cpu_present_map directly
  Blackfin: bf548-ezkit/bf561-ezkit: update nor flash layout
  Blackfin: initial perf_event support
  Blackfin: update anomaly lists to latest public info
  Blackfin: use on-chip reset func with newer parts
  Blackfin: bf533-stamp/bf537-stamp: drop ad1980 from defconfigs
  Blackfin: optimize MMR reads during startup a bit
  Blackfin: bf537: demux port H mask A and emac rx ints
  Blackfin: bf537: fix excessive gpio int demuxing
  Blackfin: bf54x: drop unused pm gpio handling
  ...
2011-05-25 15:34:14 -07:00
Stephen Boyd
5ca43f6c3b lib: consolidate DEBUG_STACK_USAGE option
Most arches define CONFIG_DEBUG_STACK_USAGE exactly the same way.  Move it
to lib/Kconfig.debug so each arch doesn't have to define it.  This
obviously makes the option generic, but that's fine because the config is
already used in generic code.

It's not obvious to me that sysrq-P actually does anything caution by
keeping the most inclusive wording.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Richard Weinberger <richard@nod.at>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mackerras <paulus@samba.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 08:39:54 -07:00
Mike Frysinger
d6cb2e3a8d Blackfin: use new common PERCPU_INPUT define
The Blackfin percpu input sections are outdated, so rather than update
them, drop them completely and use the new common define.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:15 -04:00
Scott Jiang
6f53dbbb7f Blackfin: boards: update ASoC resources after machine driver overhaul
Now that the Blackfin machine drivers have been updated to the
multicomponent support, update the resources to match.  The pin
settings are now a board issue and removed from the driver.

Signed-off-by: Scott Jiang <scott.jiang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:14 -04:00
Steven Miao
f9691bb967 Blackfin: work around anomaly 05000480
Anomaly 05000480 on BF537 rev 0.0, 0.1, 0.2:
Multiple Simultaneous Urgent DMA Requests May Cause DMA System Instability

Suggested Workaround:
Program the DMA Traffic Control Period to a non-zero value.  This forces
the DMA block to group accesses together rather than allow arbitration for
each piece of data placed on the internal DMA bus.

Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:14 -04:00
Mike Frysinger
7a7a430f74 Blackfin: fix addr type with bfin_write_{or,and} helpers
Since the bfin_write() func needs proper type information in order to
expand into the right bfin_writeX() variant, preserve the addr's type
when setting up the local __addr.  Otherwise the helpers will detect
the variant based upon sizeof(void) which is almost never right.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:13 -04:00
Alexey Dobriyan
934fe05bf0 Blackfin: convert /proc/sram to seq_file
->read_proc interface is going away, switch to seq_file.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:13 -04:00
Alexey Dobriyan
6362ec272c Blackfin: switch /proc/gpio to seq_file
->read_proc interface is going away, switch to seq_file.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:12 -04:00
Mike Frysinger
d763c58a88 Blackfin: fix indentation with bfin_read() helper
Use tabs instead of spaces to indent.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:11 -04:00
KOSAKI Motohiro
fecedc8071 Blackfin: convert old cpumask API to new one
old cpu_xxx() APIs is planned to removed later. then, converted.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:11 -04:00
KOSAKI Motohiro
e887eb61e5 Blackfin: don't touch task->cpus_allowed directly
Every callter (except kthread_bind) should use proper
set_cpus_allowed_ptr() APIs.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:10 -04:00
KOSAKI Motohiro
3cb8a39fa6 Blackfin: don't touch cpu_possible_map and cpu_present_map directly
We plan to remove cpu_possible_map and cpu_present_map later and we
have proper init_cpu_possible() and init_cpu_present() APIs.

Therefore this patch rewrites platform_init_cpus and platform_prepare_cpus
by their APIs.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:10 -04:00
Mike Frysinger
5607204755 Blackfin: bf548-ezkit/bf561-ezkit: update nor flash layout
Both the BF548-EZKIT and the BF561-EZKIT use top boot flashes, so now
that Das U-Boot uses the last small sector for its environment, update
their nor layout in the kernel accordingly.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:09 -04:00
Mike Frysinger
7db7917290 Blackfin: initial perf_event support
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:09 -04:00
Mike Frysinger
93f1742c63 Blackfin: update anomaly lists to latest public info
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:08 -04:00
Mike Frysinger
803103925b Blackfin: use on-chip reset func with newer parts
Turns out the documentation is wrong and doing "RAISE 1" does not result
in a software reset, only a core reset.  So when the on-chip rom has a
functioning reset helper, use it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:43 -04:00
Mike Frysinger
f91c69168a Blackfin: bf533-stamp/bf537-stamp: drop ad1980 from defconfigs
These boards don't have AD1980 modules, and that device is deprecated,
so don't bother building it up by default anymore.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:43 -04:00
Mike Frysinger
00b5c50e47 Blackfin: optimize MMR reads during startup a bit
Since the value of these MMRs aren't changing, store the value in a local
variable and work off of that.  This avoids multiple MMR reads which are
implicitly forced by the volatile markings.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:43 -04:00
Mike Frysinger
8c05410350 Blackfin: bf537: demux port H mask A and emac rx ints
The BF537 SIC combines the gpio port H mask A interrupts with the
emac rx interrupt, so we need to demux this in software.

It also combines the gpio port H mask B and the emac tx interrupts,
and the watchdog and port F mask B interrupts, but since we don't
support mask B yet, just add the defines for now.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:43 -04:00
Mike Frysinger
e2a8092c3f Blackfin: bf537: fix excessive gpio int demuxing
The search logic in the gpio demux walks all possible gpio blocks starting
at the specified pin.  The trouble on bf537 parts when we demux the port
F and port G mask A interrupts is that we also demux port H mask A ints.
Most of the time this isn't an issue as people don't usually use port H,
but might as well avoid it when possible.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:43 -04:00
Mike Frysinger
dd8cb37b4e Blackfin: bf54x: drop unused pm gpio handling
This functionality was merged into the common bfin_pm_standby_ctrl func
some time ago, so punt these now unused funcs and data, and localize the
wake funcs that aren't needed externally anymore.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:43 -04:00
Mike Frysinger
f58c3276d3 Blackfin: move bf537-specific irq code out of common code
The SIC interrupt line muxing that the bf537 does is specific to this
CPU (thankfully), so rip it out of the common code and move it to a
bf537-specific file.  This tidies up the common code significantly.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:43 -04:00
Mike Frysinger
6327a574f9 Blackfin: move internal irq prototypes out of global namespace
These are only used in a few internal Blackfin places, so move the irq
prototypes out of the global header and into the internal irq one.  No
functional changes other than shuffling locales.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:43 -04:00
Mike Frysinger
fc6bd7b8ad Blackfin: clean up irq ifdef logic a bit
Prefer MMR named checks over part-specific lists, condense duplicated
code across different #ifdef branches, simplify CONFIG_PM ifdefs, and
drop unused kgdb header.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:43 -04:00
Mike Frysinger
3086fd2768 Blackfin: bf51x/bf52x: fix typo in hysteresis MMR names
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:42 -04:00
Mike Frysinger
c977819d01 Blackfin: delete duplicated user single step prototypes
These are in linux/ptrace.h, so no need for us to duplicate them.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:42 -04:00
Sonic Zhang
c505217ca0 Blackfin: kgdb: cache flushing is not safe in SMP mode
Make sure we mark cache flushing as unsafe to kgdb in SMP mode so that
kgdb doesn't flush things incorrectly on us.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:42 -04:00
Mike Frysinger
2951acba85 Blackfin: SMP: drop unused blackfin_cpudata.idle pointer
Not sure when we stopped using this field, but nothing in the tree uses
this now, so punt it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:42 -04:00
Mike Frysinger
44491fbc5a Blackfin: SMP: fix cpudata cache setup
After some cache setup reordering changesets, the blackfin_cpudata init
was left behind.  While cpu0's data was correct, cpu1's data was not.
Not that big of a deal as these are only used in the cpuinfo output, but
should still be fixed.  So move the setup of these fields to the common
cache setup function to avoid this happening again in the future.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:42 -04:00
Mike Frysinger
8d011f70b0 Blackfin: clean up /proc/cpuinfo output
The smp flush lines are too long and have too many newlines, so scale
them back to match the other lines.

The %p modifier shows "(null)" for 0, so use %08x instead.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:42 -04:00
Mike Frysinger
3f62bcb259 Blackfin: bf527-ezkit: tweak sound defconfig
Build the sound pieces that the board actually has into the kernel, and
punt older devices that we discourage.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:42 -04:00
Mike Frysinger
115103a9fe Blackfin: bf533/bf537/bf561: convert to BFIN_IRQ helper
This brings the parts in line with newer ones, and makes things easier
to read at a glance.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:42 -04:00
Mike Frysinger
3dd666067d Blackfin: clean up style in irq defines
These files had a lot of whitespace damage, mostly due to copying and
pasting original files that had damage.

The BF561 header also had a lot of unused CONFIG_DEF_xxx defines, so
punt them all.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:42 -04:00
Mike Frysinger
6adc521e71 Blackfin: unify core IRQ definitions
Start a new common IRQ header and move all of the CEC pieces there.  This
lets the individual part headers worry just about its SIC defines.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:42 -04:00
Mike Frysinger
6b108049d6 Blackfin: ints-priority: unify duplicate vec to irq lookup logic
Seems the ipipe code just copied & pasted the existing irq lookup logic,
so pull the logic out of do_irq() and into a local helper, and convert
the two users over to that.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:41 -04:00
Mike Frysinger
e9e334c35e Blackfin: ints-priority: clean up some local vars
The local ivg structs need not be exported, so mark them as static.
Further, the "num_spurious" variable is only incremented and never
actually read anywhere, so punt it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:41 -04:00
Sonic Zhang
bc6b92f8c3 Blackfin: don't attempt to flush on-chip L1 SRAM regions
Since the on-chip L1 regions are not cacheable, there is no point in
trying to flush/invalidate them.  Plus, older Blackfin parts like to
trigger an exception (like BF533-0.3).

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:41 -04:00
Mike Frysinger
73ecfcf908 Blackfin: first pass at debug mmr support
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:41 -04:00
Jamie Iles
fee88c58c7 mtd: bfin: convert to mtd_device_register()
Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS
preprocessor conditionals as partitioning is always available.

Cc: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25 02:20:59 +01:00
Linus Torvalds
5129df03d0 Merge branch 'for-2.6.40' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-2.6.40' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: Unify input section names
  percpu: Avoid extra NOP in percpu_cmpxchg16b_double
  percpu: Cast away printk format warning
  percpu: Always align percpu output section to PAGE_SIZE

Fix up fairly trivial conflict in arch/x86/include/asm/percpu.h as per Tejun
2011-05-24 11:53:42 -07:00
Linus Torvalds
0f1bdc1815 Merge branch 'timers-clocksource-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-clocksource-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  clocksource: convert mips to generic i8253 clocksource
  clocksource: convert x86 to generic i8253 clocksource
  clocksource: convert footbridge to generic i8253 clocksource
  clocksource: add common i8253 PIT clocksource
  blackfin: convert to clocksource_register_hz
  mips: convert to clocksource_register_hz/khz
  sparc: convert to clocksource_register_hz/khz
  alpha: convert to clocksource_register_hz
  microblaze: convert to clocksource_register_hz/khz
  ia64: convert to clocksource_register_hz/khz
  x86: Convert remaining x86 clocksources to clocksource_register_hz/khz
  Make clocksource name const
2011-05-19 17:44:13 -07:00