Commit graph

499 commits

Author SHA1 Message Date
Anton Vorontsov
e598477a3a [POWERPC] 86xx: mpc8610_hpcd: add support for PCI Express x8 slot
This patch adds pcie node which is resposible for PCI-E x8 slot
functioning. Though, this was tested using only x1 SKY2 NIC.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-01 23:01:46 -05:00
Jason Jin
aecb2b6eac [POWERPC] 86xx: Fix the wrong serial1 interrupt for 8610 board
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-30 05:45:53 -05:00
Grant Likely
a2884f37b6 [POWERPC] mpc5200: Switch mpc5200 dts files to dts-v1 format
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-04-29 07:19:07 -06:00
s.hauer@pengutronix.de
106757b38f [POWERPC] mpc5200: add Phytec pcm030 board support
Add board support for the Phytec pcm030 mpc5200b based board. It
does not need any platform specific fixups and as such is handled
as a mpc5200 simple platform.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-04-29 07:17:12 -06:00
Zhang Wei
56fde1ff69 [RAPIDIO] Add RapidIO node into MPC8641HPCN dts file
This adds properties describing the RapidIO controller to the
device-tree source for the MPC8641HPCN board.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-29 19:40:28 +10:00
York Sun
9b53a9e28a fbdev: powerpc: driver for Freescale 8610 and 5121 DIU
The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs

All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0.  Changing pixel clock has no effect
on other fbs.

Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0

required command line parameters to preallocate memory for frame buffer diufb.

optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:

Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60

Bpp
bpp=32, bpp=24, or bpp=16

Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS

Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.

If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:40 -07:00
Kumar Gala
f360bf0015 [POWERPC] Add zImage.iseries to arch/powerpc/boot/.gitignore
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-25 09:48:13 +10:00
Grant Likely
b9e4f17666 [POWERPC] bootwrapper: fix build error on virtex405-head.S
virtex405-head.S is an assembler file, not a C file; therefore BOOTAFLAGS
is the correct place to set the needed -mcpu=405 flag.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-04-24 13:32:47 -05:00
Stefan Roese
5020231bf7 [POWERPC] 4xx: Add NOR FLASH entries to Canyonlands and Glacier dts
This patch adds default NOR entries to the AMCC Canyonlands (460EX)
and Glacier (460GT) dts files.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-04-24 13:32:46 -05:00
John Linn
2f0b45f846 [POWERPC] Xilinx: boot support for Xilinx uart 16550.
The Xilinx 16550 uart core is not a standard 16550 because it uses
word-based addressing rather than byte-based adressing. With
additional properties it is compatible with the open firmware
'ns16550' compatible binding.

This code updates the ns16550 driver to use the reg-offset property
so that the Xilinx UART 16550 can be used with it. The reg-shift
was already being handled.

Signed-off-by: John Linn <john.linn@xilinx.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-04-24 13:32:46 -05:00
Haiying Wang
8bdf573334 [POWERPC] 85xx: Fix the size of qe muram for MPC8568E
MPC8568E has 64K byte MURAM, so the size should be 0x10000, not 0xc000.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17 09:52:18 -05:00
Paul Gortmaker
06f35b4ba6 [POWERPC] 86xx: mark functions static, other minor cleanups
Cleanups as suggested by Stephen Rothwell and Dale Farnsworth, which
incudes marking a bunch of functions static and add a vendor prefix to
the compat node check for uniqueness.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17 09:51:29 -05:00
Kumar Gala
998c610363 [POWERPC] fsl: Convert dts to v1 syntax
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17 09:40:48 -05:00
Kumar Gala
280bb34bc0 [POWERPC] 85xx: minor .dts cleanups
* remove #cpus from mpc8544ds.dts (not used anywhere else)
* remove memreserve from mpc8568mds.dts (not needed)

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17 01:29:14 -05:00
Kumar Gala
32f960e943 [POWERPC] 85xx: Convert dts to v1 syntax
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17 01:28:15 -05:00
Paul Gortmaker
81fad217b3 [POWERPC] 86xx: Add device tree source for Wind River SBC8641D
This adds in the device tree source for the SBC8641D, based
largely on the mpc8641_hpcn.dts.  The biggest differences are
the lack of a complex IRQ mapping (since no Uli/i8259 cascade)
and the different layout of devices on the localbus node.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17 01:01:41 -05:00
Scott Wood
378458d865 [POWERPC] cuboot-pq2: PCI fixes
1. Detect (and bail out on) more conditions that violate the
assumptions of the setup code -- we assume in such cases that the device
tree is correct and reflects what the firmware did.

2. The inbound memory mask calculation was wrong.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17 01:01:40 -05:00
Anton Vorontsov
56626f335b [POWERPC] QE: UCC nodes cleanup
- get rid of `model = "UCC"' in the ucc nodes
  It isn't used anywhere, so remove it. If we'll ever need something
  like this, we'll use compatible property instead.
- replace last occurrences of device-id with cell-index.
  Drivers are modified for backward compatibility's sake.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17 01:01:38 -05:00
Laurent Pinchart
0585fa5fb7 [POWERPC] ep8248e: Reference SMC parameter RAM base in the device tree.
This patch modifies the Embedded Planet EP8248E device tree to reference the
SMC paramater RAM base register instead of the parameter RAM allocated by the
boot loader.

The cpm_uart driver will allocate parameter RAM itself, making the serial port
initialisation independent of the boot loader.

The patch adds the parameter RAM allocated by the boot loader in the CPM muram
node, making it available to the kernel.

Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17 01:01:37 -05:00
Laurent Pinchart
c2dd3529f3 [POWERPC] cpm-serial: Relocate CPM buffer descriptors and SMC parameter ram.
This patch relocates the buffer descriptors and the SMC parameter RAM at the
end of the first CPM muram chunk, as described in the device tree. This allows
device trees to stop excluding SMC parameter ram allocated by the boot loader
from the CPM muram node.

Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17 01:01:37 -05:00
Laurent Pinchart
da0a5f0c65 [POWERPC] Add bootwrapper function to get virtual reg from the device tree.
This patch adds a new generic device tree processing function that retrieves
virtual reg addresses from the device tree to the bootwrapper code. It also
updates the bootwrapper code to use the new function.

dt_get_virtual_reg() retrieves the virtual reg addresses from the
"virtual-reg" property. If the property can't be found, it uses the "reg"
property and walks the tree to translate it to absolute addresses.

Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17 01:01:37 -05:00
Sebastian Siewior
1028d4f162 [POWERPC] 85xx: Enable DMA engine on the MPC8544 DS
Add the device tree node for the DMA engine on 8544, publish
the device and enable the driver in the defconfig.

Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17 01:01:36 -05:00
Kumar Gala
b18796d32a [POWERPC] bootwrapper: Use physical address in PHDR for uImage
Now that we properly set the physical address in the program header of the
vmlinux ELF we can extract it to properly set the load and entry point for
u-boot uImages.  Before we always hard coded the load & entry point to 0.
However there are situations that the kernel may be built with a non-zero
physical address.

We use objdump to extract the PHDR.  We assume that there is only one
PHDR in the vmlinux of type LOAD.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-17 07:46:14 +10:00
Dale Farnsworth
a7e695f6bf [POWERPC] prpmc2800 needs a dtbImage
The prpmc2800 platform requires a zImage formatted file with an
embedded dtb file.  Rename the requested boot image file to
dtbImage.prpmc2800.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Acked-by: Mark A. Greer <mgreer@mvista.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-15 21:21:25 +10:00
Dale Farnsworth
a0916bd64a [POWERPC] mv643xx_eth: Prepare to support multiple silicon blocks
The mv643xx_eth driver is being modified to support multiple instances
of the ethernet silicon block on the same platform.  Each block contains
a single register bank containing the registers for up to three ports
interleaved within that bank.  This patch updates the PowerPC OF to
platform_device glue code to support multiple silicon blocks, each
with up to three ethernet ports.  The main difference is that we now
allow multiple mv64x60_shared platform_devices to be registered and
we provide each port platform_device with a pointer to its associated
shared platform_device.  The pointer will not be used until the
mv643xx_eth driver changes are committed.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Acked-by: Mark Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-15 21:21:24 +10:00
Mark A. Greer
1791f91bc7 [POWERPC] prpmc2800: Clean up dts properties
Remove several unused (or software config only) properties.
Rename marvel node to "system-controller".  Also, rename the
"block-index" property to "cell-index" to conform to current
practice.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-15 21:21:24 +10:00
Dale Farnsworth
a05ce88ab3 [POWERPC] mv64x60: Remove device tree absolute path references
Replace several device node absolute path lookups in the mv64x60
bootwrapper code with lookups by compatible or device_type
properties.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Acked-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-15 21:21:24 +10:00
Mark A. Greer
a1810b44c2 [POWERPC] mv64x60: Fix FDT compatible names: mv64x60 => mv64360
Compatible names should refer to a specific version of the hardware,
without wildcards.  Change each instance of mv64x60 to mv64360, which
is the oldest version we currently support.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-15 21:21:24 +10:00
Dale Farnsworth
fb9d93de60 [POWERPC] prpmc2800: Fix frequencies in prpmc2800.dts
After the conversion to dts v1 format, seeing the frequencies
in decimal made it obvious that some of them had been
incorrectly truncated.  This fixes them.  Note that the PCI
frequency comes from a different source and is documented
as 66MHz, so it was left at 66000000.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Acked-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-15 21:21:23 +10:00
Mark A. Greer
d528be50c6 [POWERPC] prpmc2800: Convert DTS to v1 and add labels
Update the prpmc2800 DTS file to version 1 and add labels.
I verified that there was no change in the resulting dtb file.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-15 21:21:23 +10:00
Paul Mackerras
ac7c5353b1 Merge branch 'linux-2.6' 2008-04-14 21:11:02 +10:00
Stefan Roese
9d7030be33 [POWERPC] 4xx: Change dts files to support jumbo frames
This patch changes the "max-frame-size" property to 9000 for all gbit
enabled 4xx boards. All those ports generally support jumbo frames, so
let's give the user a chance to enable it.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-04-05 09:32:37 -05:00
Stefan Roese
a6190a84ab [POWERPC] 4xx: Some EMAC related changes in Canyonlands & Glacier dts files
This patch fixes some problems in the Canyonlands 460EX and Glacier 460GT
dts files:

- Add "mdio-device = <&EMAC0>" to all all EMAC's except for EMAC0 itself
  (the 460EX/GT only can access the PHY via the EMAC0 instance)
- Add TAH support to Canyonlands dts

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-04-05 09:32:32 -05:00
René Bürgel
8d813941b1 [POWERPC] Fix MPC5200 (not B!) device tree so FEC ethernet works
This gets the FEC ethernet driver working again on the lite5200
platform.

The FEC driver is also compatible with the MPC5200, not only with the
MPC5200B, so this adds a suitable entry to the driver's match list.
Furthermore this adds the settings for the PHY in the dts file for the
Lite5200.  Note, that this is not exactly the same as in the
Lite5200B, because the PHY is located at f0003000:01 for the 5200, and
at :00 for the 5200B.  This was tested on a Lite5200 and a Lite5200B,
both booted a kernel via tftp and mounted the root via nfs
successfully.

Signed-off-by: René Bürgel <r.buergel@unicontrol.de>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-03 22:11:12 +11:00
Bartlomiej Sieka
115e1adca3 [POWERPC] mpc5200: Amalgamated DTS fixes and updates
DTS updates that fix booting problems on mpc5200-based boards:
- change to ethernet reg property
- addition of mdio and phy nodes
- removal of pci node (Motion-Pro board)

Other DTS updates:
- update i2c device tree nodes
- add lpb bus node and flash device (without partitions defined)
- add rtc i2c nodes

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-03 22:11:12 +11:00
Grant Likely
d2477b5cc8 [POWERPC] bootwrapper: Add a firmware-independent simpleboot target.
This target produces a flat binary rather than an ELF file,
fixes the entry point at the beginning of the image, and takes
a complete device tree with no fixups needed.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-04-02 20:36:11 -05:00
Grant Likely
e04018e8e4 [POWERPC] add target for building .dtb files
Call dtc from the Makefile instead of the wrapper script so that the dt
blobs can be generated with a simple make invocation.

Using this patch allows board ports to trigger automatic building of .dtb
files by adding them to the image-y target list.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-04-02 20:29:11 -05:00
Harvey Harrison
e48b1b452f [POWERPC] Replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-01 20:43:09 +11:00
Geoff Levand
5761eaa3a5 [POWERPC] PS3: Bootwrapper improvements
Improve the debugging support of the PS3 bootwraper code:

 o Increase the size of the PS3 bootwrapper overlay from 256 to 512 bytes to
   allow for more debugging code in the overlay.
 o Use the dot symbol to set the size of __system_reset_overlay.  The
   assembler will then emit an error if the overlay code is too big.
 o Remove some unused instructions.
 o Update the text describing the PS3 bootwrapper overlay.
 o Add a check for null pointer writes.
 o Change hcall return value from s64.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-01 20:43:07 +11:00
Paul Mackerras
e6b18912d3 Merge branch 'powerpc-next' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc 2008-04-01 20:34:26 +11:00
Kim Phillips
96ce1b6dc5 [POWERPC] sata_fsl: reduce compatibility to fsl,pq-sata
as prescribed in Documentation/powerpc/booting-without-of.txt.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-31 10:27:35 -05:00
Anton Vorontsov
8e8ff3a309 [POWERPC] 83xx: Fix wrong USB phy type in mpc837xrdb dts
Due to chip constraint MPC837x USB DR module can only use
ULPI and serial PHY interfaces.  The patch fixes the wrong
type in dts.

This patch fixes USB malfunctioning on the MPC837xE-RDB boards.

Similar patch has been already applied for the MDS boards:

  commit 28b9588592
  Author: Li Yang <leoli@freescale.com>
  Date:   Thu Mar 6 18:42:26 2008 +0800

      [POWERPC] 83xx: Fix wrong USB phy type in mpc837xmds dts

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-31 10:23:48 -05:00
Alexandr Smirnov
ee0a3f564e [POWERPC] 85xx: Emerson KSI8560 device tree
Add device tree file for Emerson KSI8560 board.

Signed-off-by: Alexandr Smirnov <asmirnov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-26 11:30:46 -05:00
Alexandr Smirnov
ff880112af [POWERPC] 85xx: Emerson KSI8560 bootwrapper
Add boot wrapper for Emerson KSI8560 board.

Signed-off-by: Alexandr Smirnov <asmirnov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-26 11:30:45 -05:00
Stefan Roese
99d8be052e [POWERPC] 4xx: Add L2 cache node to AMCC Taishan dts file
This patch adds the L2 cache node to the Taishan 440GX dts file.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26 07:28:01 -05:00
Stefan Roese
145692a734 [POWERPC] 4xx: Add "amcc, haleakala" to the toplevel compatible property
Currently Haleakala uses the Kilauea platform code. This patch adds
"haleakala" to the compatible property, in case later kernel versions
will introduce a Haleakala platform code.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26 07:27:45 -05:00
Stefan Roese
c06cf7dad6 [POWERPC] 4xx: Add AMCC Glacier 460GT eval board dts
The patch adds the Glacier dts. The Glacier is nearly identical to the
Canyonlands (460EX). Here the differences:

- 4 ethernet ports instead of 2
- no SATA port
- no USB port

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26 07:27:38 -05:00
Stefan Roese
7831426351 [POWERPC] 4xx: Add TAH support to taishan dts
This patch adds TAH (TCP/IP Acceleration Hardware) support to the
taishan 440GX dts. It depends on the NEWEMAC/tah patch that adds the
compatible "ibm,tah" property to the matching table.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26 07:26:55 -05:00
Josh Boyer
d0a48c9f4c [POWERPC] 4xx: Add bootwrapper for AMCC Yosemite board
Add the cuboot wrapper for the AMCC 440EP Yosemite board

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26 07:19:17 -05:00
Josh Boyer
fd0ed740a1 [POWERPC] 4xx: Add AMCC 440EP Yosemite DTS
This adds a DTS file for the AMCC 440EP Yosemite board.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26 07:19:17 -05:00