Commit graph

453 commits

Author SHA1 Message Date
Sean Hefty
1b52fa98ed IB: refcount race fixes
Fix race condition during destruction calls to avoid possibility of
accessing object after it has been freed.  Instead of waking up a wait
queue directly, which is susceptible to a race where the object is
freed between the reference count going to 0 and the wake_up(), use a
completion to wait in the function doing the freeing.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-12 14:57:52 -07:00
Roland Dreier
6f4bb3d820 IB/ipath: Properly terminate PCI ID table
The ipath driver's table of PCI IDs needs a { 0, } entry at the end.
This makes all of the device aliases visible to userspace so hotplug
loads the module for all supported devices.  Without the patch,
modinfo ipath_core only shows:

    alias:          pci:v00001FC1d0000000Dsv*sd*bc*sc*i*

instead of the correct:

    alias:          pci:v00001FC1d00000010sv*sd*bc*sc*i*
    alias:          pci:v00001FC1d0000000Dsv*sd*bc*sc*i*

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
2006-05-12 14:57:52 -07:00
Michael S. Tsirkin
ce477ae4f8 IB/mthca: FMR ioremap fix
Addresses for ioremap must be calculated off of pci_resource_start;
we can't directly use the bus address as seen by the HCA.  Fix the
code that remaps device memory for FMR access.

Based on patch by Klaus Smolin.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-10 15:16:57 -07:00
Roland Dreier
5941d079f2 IPoIB: Free child interfaces properly
When deleting a child interface with a non-default P_Key via
/sys/class/net/ibX/delete_child, the interface must be freed with
free_netdev() (rather than kfree() on the private data).

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-09 22:54:59 -07:00
Roland Dreier
a3285aa4ee IB/mthca: Fix race in reference counting
Fix races in in destroying various objects.  If a destroy routine
waits for an object to become free by doing

	wait_event(&obj->wait, !atomic_read(&obj->refcount));
	/* now clean up and destroy the object */

and another place drops a reference to the object by doing

	if (atomic_dec_and_test(&obj->refcount))
		wake_up(&obj->wait);

then this is susceptible to a race where the wait_event() and final
freeing of the object occur between the atomic_dec_and_test() and the
wake_up().  And this is a use-after-free, since wake_up() will be
called on part of the already-freed object.

Fix this in mthca by replacing the atomic_t refcounts with plain old
integers protected by a spinlock.  This makes it possible to do the
decrement of the reference count and the wake_up() so that it appears
as a single atomic operation to the code waiting on the wait queue.

While touching this code, also simplify mthca_cq_clean(): the CQ being
cleaned cannot go away, because it still has a QP attached to it.  So
there's no reason to be paranoid and look up the CQ by number; it's
perfectly safe to use the pointer that the callers already have.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-09 10:50:29 -07:00
Roland Dreier
d945e1df28 IB/srp: Fix tracking of pending requests during error handling
If a SCSI abort completes, or the command completes successfully, then
the driver must remove the command from its queue of pending
commands.  Similarly, if a device reset succeeds, then all commands
queued for the given device must be removed from the queue.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-09 10:50:28 -07:00
Ralph Campbell
d8b9f23b23 IB: Fix display of 4-bit port counters in sysfs
The code to display local_link_integrity_errors and
excessive_buffer_overrun_errors in
/sys/class/infiniband/<hca>/ports/<n>/counters/
uses the wrong shift to extract the 4 bit values.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-09 10:50:28 -07:00
Bryan O'Sullivan
f6f0413e10 IB/ipath: tidy up white space in a few files
Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-01 12:14:23 -07:00
Bryan O'Sullivan
d562a5ae69 IB/ipath: fix label name in interrupt handler
Names that are the opposite of their intended meanings are not so helpful.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-01 12:14:22 -07:00
Bryan O'Sullivan
ae15f540cc IB/ipath: improve sparse annotation
Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-01 12:14:21 -07:00
Bryan O'Sullivan
9b2017f1e1 IB/ipath: simplify IB timer usage
Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-01 12:14:21 -07:00
Bryan O'Sullivan
76f0dd141b IB/ipath: simplify RC send posting
Remove some unnecessarily complicated tests.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-01 12:14:20 -07:00
Bryan O'Sullivan
c71c30dcba IB/ipath: prevent hardware from being accessed during reset
The reset code now turns off the PRESENT flag during a reset, so that
other code won't attempt to access a device that's in mid-reset.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-01 12:14:16 -07:00
Bryan O'Sullivan
fccea66364 IB/ipath: fix verbs registration
Remember when the verbs layer unregisters from the lower-level code.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-01 12:14:15 -07:00
Bryan O'Sullivan
52e7fad825 IB/ipath: change handling of PIO buffers
Different ipath hardware types have different numbers of buffers
available, so we decide on the counts ourselves unless we are specifically
overridden with a module parameter.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-01 12:14:14 -07:00
Bryan O'Sullivan
23e86a4584 IB/ipath: iterate over correct number of ports during reset
Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-01 12:14:13 -07:00
Bryan O'Sullivan
68dd43a162 IB/ipath: set up 32-bit DMA mask if 64-bit setup fails
Some systems do not set up 64-bit maps on systems with 2GB or less of
memory installed, so we have to fall back to trying a 32-bit setup.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-01 12:14:12 -07:00
Bryan O'Sullivan
755e4ca4a9 IB/ipath: fix race with exposing reset file
We were accidentally exposing the "reset" sysfs file more than once
per device.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-01 12:14:11 -07:00
Roland Dreier
254abfd33a IB/mthca: Fix offset in query_gid method
GuidInfo records have 8 byte GUIDs in them, so an index should be
multiplied by 8 to get an offset.  mthca_query_gid() was incorrectly
multiplying by 16.

Noticed by Leonid Keller <leonid@mellanox.co.il>.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-01 10:40:23 -07:00
Adrian Bunk
415dcd95b2 IB/mthca: make a function static
This patch makes the needlessly global mthca_update_rate() static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-19 11:40:12 -07:00
Roland Dreier
5494c22ba2 IB/ipath: Fix whitespace
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-19 11:40:12 -07:00
Roland Dreier
ac2ae4c977 IB/ipath: Make more names static
Make symbols that are only used in a single source file static.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-19 11:40:12 -07:00
Hal Rosenstock
64cb9c6aff IB/mad: Fix RMPP version check during agent registration
Only check that RMPP version is not specified when MAD class does not
support RMPP.  Just because a class is allowed to use RMPP doesn't
mean that rmpp_version needs to be set for the MAD agent to
register. Checking this was a recent change which was too pedantic.

Signed-off-by: Hal Rosenstock <halr@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-19 11:40:11 -07:00
Roland Dreier
f80887d0b9 IB/srp: Remove request from list when SCSI abort succeeds
If a SCSI abort succeeds, then the aborted request should to be
removed from the list of pending requests.  This fixes list corruption
after an abort occurs.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-19 11:40:10 -07:00
Jack Morgenstein
59fef3b1e9 IB/mthca: Fix max_srq_sge returned by ib_query_device for Tavor devices
The driver allocates SRQ WQEs size with a power of 2 size both for
Tavor and for memfree. For Tavor, however, the hardware only requires
the WQE size to be a multiple of 16, not a power of 2, and the max
number of scatter-gather allowed is reported accordingly by the
firmware (and this is the value currently returned by
ib_query_device() and ibv_query_device()).

If the max number of scatter/gather entries reported by the FW is used
when creating an SRQ, the creation will fail for Tavor, since the
required WQE size will be increased to the next power of 2, which
turns out to be larger than the device permitted max WQE size (which
is not a power of 2).

This patch reduces the reported SRQ max wqe size so that it can be used
successfully in creating an SRQ on Tavor HCAs.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-12 11:42:30 -07:00
Michael S. Tsirkin
ce684df05a IB/cache: Use correct pointer to calculate size
When allocating gid_cache, use kmalloc(sizeof *gid_cache, ...) rather
than kmalloc(sizeof *pkey_cache, ...).  It doesn't really matter which
one is used, since the size ends up the same either way, but it's much
better to say what we mean.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-10 13:17:43 -07:00
Roland Dreier
f697f74a6b IPoIB: Use spin_lock_irq() instead of spin_lock_irqsave()
We know ipoib_flush_paths() is called from plain process context with
interrupts enabled, since it does wait_for_completion().  So there's
no need to use spin_lock_irqsave() -- spin_lock_irq() is fine.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-10 09:43:59 -07:00
Eli Cohen
a30bb96c6f IPoIB: Close race in ipoib_flush_paths()
ib_sa_cancel_query() must be called with priv->lock held since
a completion might arrive and set path->query to NULL.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-10 09:43:59 -07:00
Michael S. Tsirkin
abf45dbb5b IB/mthca: Disable tuning PCI read burst size
The PCI spec recommends against drivers playing with a device's PCI
read burst size, and says that systems software should configure it.
And we actually have users that report that changing it from the
default set by BIOS hurts performance and/or stability for them.  On
the other hand, the Mellanox Programmer's Reference Manual recommends
turning it up all the way to the maximum value.  Some tests conducted
here in the lab do not show performance improvement from this tuning,
but this might be just me.

As a work-around, make this tuning an option, off by default (safe
value), with an eye towards removing it completely one day if no one
complains.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-10 09:43:58 -07:00
Shirley Ma
0f4852513f IPoIB: Make send and receive queue sizes tunable
Make IPoIB's send and receive queue sizes tunable via module
parameters ("send_queue_size" and "recv_queue_size").  This allows the
queue sizes to be enlarged to fix disastrously bad performance on some
platforms and workloads, without bloating memory usage when large
queues aren't needed.

Signed-off-by: Shirley Ma <xma@us.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-10 09:43:58 -07:00
Eli Cohen
f2de3b0612 IPoIB: Wait for join to finish before freeing mcast struct
ipoib_mcast_restart_task() might free an mcast object while a join
request is still outstanding, leading to an oops when the query
completes.  Fix this by waiting for query to complete, similar to what
ipoib_stop_thread() is doing.  The wait for mcast completion code is
consolidated in wait_for_mcast_join().

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-10 09:43:58 -07:00
Jack Morgenstein
bf6a9e31cf IB: simplify static rate encoding
Push translation of static rate to HCA format into low-level drivers,
where it belongs.  For static rate encoding, use encoding of rate
field from IB standard PathRecord, with addition of value 0, for
backwards compatibility with current usage.  The changes are:

 - Add enum ib_rate to midlayer includes.
 - Get rid of static rate translation in IPoIB; just use static rate
   directly from Path and MulticastGroup records.
 - Update mthca driver to translate absolute static rate into the
   format used by hardware.  This also fixes mthca's static rate
   handling for HCAs that are capable of 4X DDR.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-10 09:43:47 -07:00
Michael S. Tsirkin
d2e0655ede IPoIB: Consolidate private neighbour data handling
Consolidate IPoIB's private neighbour data handling into
ipoib_neigh_alloc() and ipoib_neigh_free().  This will make it easier
to keep track of the neighbour structures that IPoIB is handling, and
is a nice cleanup of the code:

add/remove: 2/1 grow/shrink: 1/8 up/down: 100/-178 (-78)
function                                     old     new   delta
ipoib_neigh_alloc                              -      61     +61
ipoib_neigh_free                               -      36     +36
ipoib_mcast_join_finish                     1288    1291      +3
path_rec_completion                          575     573      -2
ipoib_mcast_join_task                        664     660      -4
ipoib_neigh_destructor                       101      92      -9
ipoib_neigh_setup_dev                         14       3     -11
ipoib_neigh_setup                             17       -     -17
path_free                                    238     215     -23
ipoib_mcast_free                             329     306     -23
ipoib_mcast_send                             718     684     -34
neigh_add_path                               705     650     -55

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-04 14:46:48 -07:00
Roland Dreier
ce1823f032 IB/srp: Fix memory leak in options parsing
Fix memory leak if parsing destination GID fails.

Coverity bug 1042

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-03 09:31:04 -07:00
Roland Dreier
227c939b00 IB/mthca: Always build debugging code unless CONFIG_EMBEDDED=y
Change the mthca debugging trace output code so that it can enabled
and disabled at runtime with the debug_level module parameter in
sysfs.  Also, don't allow CONFIG_INFINIBAND_MTHCA_DEBUG to be disabled
unless CONFIG_EMBEDDED is selected.  We want users (and especially
distros) to have this turned on unless they really need to save space,
because by the time we want debugging output, it's usually too late to
rebuild a kernel.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-02 14:39:20 -07:00
Roland Dreier
f5545d24b8 IPoIB: Always build debugging code unless CONFIG_EMBEDDED=y
Don't allow CONFIG_INFINIBAND_IPOIB_DEBUG to be disabled unless
CONFIG_EMBEDDED is selected.  We want users (and especially distros)
to have this turned on unless they really need to save space, because
by the time we want debugging output, it's usually too late to rebuild
a kernel.  The debugging output can be controlled at runtime via the
debug_level module parameter in sysfs.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-02 14:39:19 -07:00
Michael S. Tsirkin
37289efe3e IB/mad: fix oops in cancel_mads
We have seen the following OOPs in cancel_mads, when restarting opensm
multiple times:

    Call Trace:
      [<c010549b>] show_stack+0x9b/0xb0
      [<c01055ec>] show_registers+0x11c/0x190
      [<c01057cd>] die+0xed/0x160
      [<c031b966>] do_page_fault+0x3f6/0x5d0
      [<c010511f>] error_code+0x4f/0x60
      [<f8ac4e38>] cancel_mads+0x128/0x150 [ib_mad]
      [<f8ac2811>] unregister_mad_agent+0x11/0x130 [ib_mad]
      [<f8ac2a12>] ib_unregister_mad_agent+0x12/0x20 [ib_mad]
      [<f8b10f23>] ib_umad_close+0xf3/0x130 [ib_umad]
      [<c0162937>] __fput+0x187/0x1c0
      [<c01627a9>] fput+0x19/0x20
      [<c0160f7a>] filp_close+0x3a/0x60
      [<c0121ca8>] put_files_struct+0x68/0xa0
      [<c0103cf7>] do_signal+0x47/0x100
      [<c0103ded>] do_notify_resume+0x3d/0x40
      [<c0103f9e>] work_notifysig+0x13/0x25

We traced this back to local_completions unlocking mad_agent_priv->lock
while still keeping a pointer into local_list. A later call to
list_del(&local->completion_list) would then corrupt the list.

To fix this, remove the entry from local_list after looking it up but
before releasing mad_agent_priv->lock, to prevent cancel_mads from
finding and freeing it.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-02 14:39:19 -07:00
Bryan O'Sullivan
77d8798b55 IB/ipath: kbuild infrastructure
Integrate the ipath core and OpenIB drivers into the kernel build
infrastructure.  Add entry to MAINTAINERS.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-31 13:14:21 -08:00
Bryan O'Sullivan
6522108f19 IB/ipath: infiniband verbs support
The ipath_verbs.c file implements the driver-specific components of the
kernel's Infiniband verbs layer.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-31 13:14:21 -08:00
Bryan O'Sullivan
e28c00ad67 IB/ipath: misc infiniband code, part 2
Management datagram support, queue pairs, and reliable and unreliable
connections.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-31 13:14:21 -08:00
Bryan O'Sullivan
cef1cce5c8 IB/ipath: misc infiniband code, part 1
Completion queues, local and remote memory keys, and memory region
support.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-31 13:14:20 -08:00
Bryan O'Sullivan
97f9efbc47 IB/ipath: infiniband RC protocol support
This is an implementation of the Infiniband RC ("reliable connection")
protocol.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-31 13:14:20 -08:00
Bryan O'Sullivan
74ed6b5eb1 IB/ipath: infiniband UC and UD protocol support
These files implement the Infiniband UC ("unreliable connection") and UD
("unreliable datagram") protocols.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-31 13:14:20 -08:00
Bryan O'Sullivan
aa735edf5d IB/ipath: infiniband header files
These header files are used by the layered Infiniband driver.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-31 13:14:20 -08:00
Bryan O'Sullivan
889ab795a3 IB/ipath: layering interfaces used by higher-level driver code
The layering interfaces are used to implement the Infiniband protocols
and the ethernet emulation driver.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-31 13:14:20 -08:00
Bryan O'Sullivan
7f510b46e4 IB/ipath: support for userspace apps using core driver
These files introduce a char device that userspace apps use to gain
direct memory-mapped access to the InfiniPath hardware, and routines for
pinning and unpinning user memory in cases where the hardware needs to
DMA into the user address space.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-31 13:14:19 -08:00
Bryan O'Sullivan
3e9b4a5eb4 IB/ipath: sysfs and ipathfs support for core driver
The ipathfs filesystem contains files that are not appropriate for
sysfs, because they contain binary data.  The hierarchy is simple; the
top-level directory contains driver-wide attribute files, while numbered
subdirectories contain per-device attribute files.

Our userspace code currently expects this filesystem to be mounted on
/ipathfs, but a final location has not yet been chosen.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-31 13:14:19 -08:00
Bryan O'Sullivan
108ecf0d90 IB/ipath: misc driver support code
EEPROM support, interrupt handling, statistics gathering, and write
combining management for x86_64.

A note regarding i2c: The Atmel EEPROM hardware we use looks like an
i2c device electrically, but is not i2c compliant at all from a
functional perspective.  We tried using the kernel's i2c support to
talk to it, but failed.

Normal i2c devices have a single 7-bit or 10-bit i2c address that they
respond to.  Valid 7-bit addresses range from 0x03 to 0x77.  Addresses
0x00 to 0x02 and 0x78 to 0x7F are special reserved addresses
(e.g. 0x00 is the "general call" address.)  The Atmel device, on the
other hand, responds to ALL addresses.  It's designed to be the only
device on a given i2c bus.  A given i2c device address corresponds to
the memory address within the i2c device itself.

At least one reason why the linux core i2c stuff won't work for this
is that it prohibits access to reserved addresses like 0x00, which are
really valid addresses on the Atmel devices.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-31 13:14:19 -08:00
Bryan O'Sullivan
097709fea0 IB/ipath: chip initialisation code, and diag support
ipath_init_chip.c sets up an InfiniPath device for use.

ipath_diag.c permits userspace diagnostic tools to read and write a
chip's registers.  It is different in purpose from the mmap interfaces
to the /sys/bus/pci resource files.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-31 13:14:19 -08:00
Bryan O'Sullivan
dc741bbd4f IB/ipath: support for PCI Express devices
This file contains routines and definitions specific to InfiniPath
devices that have PCI Express interfaces.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-31 13:14:19 -08:00