Commit graph

89 commits

Author SHA1 Message Date
Hans de Goede
40e006aea8 [media] snd_tea575x: set_freq: update cached freq to the actual achieved frequency
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
CC: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11 16:04:12 -03:00
Hans de Goede
5daf53a6eb [media] snd_tea575x: Make the module using snd_tea575x the fops owner
Before this patch the owner field of the /dev/radio# device fops was set to
the snd-tea575x-tuner module itself. Meaning that the module which was using
it could be rmmod-ed while the device is open, and then BAD things happen.

I know, as I found out the hard way :)

Note that there is no need to also somehow increase the refcount of the
snd-tea575x-tuner module itself, since any drivers using it will have
symbolic references to it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
CC: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11 16:02:54 -03:00
Hans de Goede
0875eb755b [media] snd_tea575x: Report correct frequency range for EU/US versus JA models
My EU/US 5757 cannot tune below approx 86 Mhz, that is below that it
does not even generate the standard not tuned to anything radio noise anymore,
so clearly the 5757 cannot tune to the Japanese frequencies. This patch
assumes that likewise the 5759 cannot tune to the EU/US frequencies.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
CC: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11 16:02:15 -03:00
Hans Verkuil
152a3a7320 [media] v4l2-dev: rename two functions
Rename the function v4l2_dont_use_lock to v4l2_disable_ioctl_locking,
and rename v4l2_dont_use_cmd to v4l2_disable_ioctl.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14 15:06:50 -03:00
Hans Verkuil
6539799599 [media] tea575x-tuner: mark VIDIOC_S_HW_FREQ_SEEK as an invalid ioctl
The tea575x-tuner framework can support the VIDIOC_S_HW_FREQ_SEEK for only
some of the tea575x-based boards. Mark this ioctl as invalid if the board
doesn't support it.

This fixes an issue with S_HW_FREQ_SEEK in combination with priority handling:
since the priority check is done first it could return -EBUSY, even though
calling the S_HW_FREQ_SEEK ioctl would return -ENOTTY. It should always return
ENOTTY in such a case.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14 09:17:52 -03:00
Hans Verkuil
bc2b395c03 [media] tea575x: fix HW seek
Fix HW seek in TEA575x to work properly:
- a delay must be present after search start and before first register read
  or the seek does weird things
- when the search stops, the new frequency is not available immediately, we
  must wait until it appears in the register (fortunately, we can clear the
  frequency bits when starting the search as it starts at the frequency
  currently set, not from the value written)
- sometimes, seek remains on the current frequency (or moves only a little),
  so repeat it until it moves by at least 50 kHz

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19 11:28:52 -03:00
Hans Verkuil
d4ecc83b79 [media] tea575x-tuner: update to latest V4L2 framework requirements
The tea575x-tuner module has been updated to use the latest V4L2 framework
functionality. This also required changes in the drivers that rely on it.

The tea575x changes are:

- The drivers must provide a v4l2_device struct to the tea module.
- The radio_nr module parameter must be part of the actual radio driver,
  and not of the tea module.
- Changed the frequency range to the normal 76-108 MHz range instead of
  50-150.
- Add hardware frequency seek support.
- Fix broken rxsubchans/audmode handling.
- The application can now select between stereo and mono.
- Support polling for control events.
- Add V4L2 priority handling.

And radio-sf16fmr2.c now uses the isa bus kernel framework.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Thanks-to: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19 11:27:21 -03:00
Paul Gortmaker
da155d5b40 sound: Add module.h to the previously silent sound users
Lots of sound drivers were getting module.h via the implicit presence
of it in <linux/device.h> but we are going to clean that up.  So
fix up those users now.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:21 -04:00
Ondrej Zary
b7a80f341d [media] tea575x: remove useless input ioctls
Remove empty and useless g_input and s_input ioctls.
This fixes one fail of v4l2-compliance test.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:08 -03:00
Ondrej Zary
6a529c1a4a [media] tea575x: allow multiple opens
Change locking to allow tea575x-radio device to be opened multiple times.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:07 -03:00
Ondrej Zary
4522e825db [media] tea575x: convert to control framework
Convert tea575x-tuner to use the new V4L2 control framework. Also add
ext_init() callback that can be used by a card driver for additional
initialization right before registering the video device (for SF16-FMR2).

Also embed struct video_device to struct snd_tea575x to simplify the code.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:52:20 -03:00
Ondrej Zary
10ca720147 ALSA: tea575x: use better card and bus names
Provide real card and bus_info instead of hardcoded values.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-13 19:43:24 +02:00
Ondrej Zary
ea27316e4c ALSA: tea575x: remove freq_fixup from struct
freq_fixup is a constant, no need to hold it in struct snd_tea575x and set in
each driver.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-13 19:43:01 +02:00
Ondrej Zary
14219d0659 ALSA: tea575x: unify read/write functions
Implement generic read/write functions to access TEA575x tuners. They're now
implemented 4 times (once in es1968 and 3 times in fm801).
This also allows mute to work on all cards.
Also improve tuner detection/initialization.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-10 09:29:42 +02:00
Ondrej Zary
1872f58995 ALSA: es1968: add radio (tea575x tuner) support
Add TEA5757 radio tuner support to es1968 driver. This is found at least on
MediaForte SF64-PCE2 sound cards.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-03-21 12:44:14 +01:00
Ondrej Zary
375d135818 ALSA: tea575x-tuner: various improvements
Improve tea575x-tuner with various good things from radio-maestro:
- extend frequency range to 50-150MHz
- fix querycap(): card name, CAP_RADIO
- improve g_tuner(): CAP_STEREO, stereo and tuned indication
- improve g_frequency(): tuner index checking and reading frequency from HW
- improve s_frequency(): tuner index and type checking

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-03-21 12:43:54 +01:00
Tejun Heo
5b84ba26a9 sound: don't use flush_scheduled_work()
flush_scheduled_work() is deprecated and scheduled to be removed.

* cancel[_delayed]_work() + flush_scheduled_work() ->
  cancel[_delayed]_work_sync().

* wm8350, wm8753 and soc-core use custom code to cancel a delayed
  work, execute it immediately if it was pending and wait for its
  completion.  This is equivalent to flush_delayed_work_sync().  Use
  it instead.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-13 09:22:44 +01:00
Takashi Iwai
4e83998f5a Merge branch 'fix/misc' into topic/misc 2010-10-11 13:45:22 +02:00
Takashi Iwai
e913b14649 ALSA: i2c/other/ak4xx-adda: Fix a compile warning with CONFIG_PROCFS=n
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-30 22:59:12 +02:00
Joe Perches
9fe856e47e sound: Remove unnecessary casts of private_data
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-07 08:05:59 +02:00
Takashi Iwai
cf0dbba515 Merge remote branch 'alsa/devel' into topic/misc 2010-04-16 15:20:06 +02:00
Brian Waters
1cff399ecd ALSA: i2c: Fixed 8 checkpatch errors
Fixed 8 checkpatch errors (ERROR: do not use assignment in if condition)
in sound/i2c/i2c.c.

Signed-off-by: Brian Waters <brianmwaters@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-04-15 10:13:54 +02:00
Linus Torvalds
84db18bbeb Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: mixart: range checking proc file
  ALSA: hda - Fix a wrong array range check in patch_realtek.c
  ALSA: ASoC: move dma_data from snd_soc_dai to snd_soc_pcm_stream
  ALSA: hda - Enable amplifiers on Acer Inspire 6530G
  ASoC: Only do WM8994 bias off transition from standby
  ASoC: Don't use DCS_DATAPATH_BUSY for WM hubs devices
  ASoC: Don't do runtime wm_hubs DC servo updates if using offset correction
  ASoC: Support second DC servo readback method for wm_hubs
  ASoC: Avoid wraparound in wm_hubs DC servo correction
  ALSA: echoaudio - Eliminate use after free
  ALSA: i2c: cleanup: change parameter to pointer
  ALSA: hda - Add MSI blacklist for Aopen MZ915-M
  ASoC: OMAP: Fix capture pointer handling for OMAP1510 to work correctly with recent ALSA PCM code
  ALSA: hda - Update document about MSI and interrupts
  ALSA: hda: Fix 0 dB offset for Lenovo Thinkpad models using AD1981
  ALSA: hda - Add missing printk argument in previous patch
  ASoC: Fix passing platform_data to ac97 bus users and fix a leak
  ALSA: hda - Fix ADC/MUX assignment of ALC269 codec
  ALSA: hda - Fix invalid bit values passed to snd_hda_codec_amp_stereo()
  ASoC: wm8994: playback => capture
2010-04-07 08:42:25 -07:00
Dan Carpenter
f11947c7c5 ALSA: i2c: cleanup: change parameter to pointer
We actually pass an array of 7 chars not 5.
This silences a smatch warning.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-04-04 12:21:39 +02:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Takashi Iwai
86e1d57e4f Merge branch 'topic/hda' into for-linus 2009-12-04 16:22:45 +01:00
Ondrej Zary
1233faa891 ALSA: tea575x-tuner: fix mute
Fix mute state reporting in tea575x-tuner.
This fixes mute function in kradio on SF64-PCR radio card.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-03 18:23:20 +01:00
Akinobu Mita
401de8184a ALSA: ice1712: Use bitrev8
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-13 08:30:22 +01:00
Pavel Hofman
42cfa276ae ALSA: ak4113 support
* complete support for ak4113
* based on code for ak4114 and ak4117

Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-21 15:45:07 +02:00
Pavel Hofman
8f34692f63 ALSA: ak4620 support, codec regs listed in proc
* complete support for ak4620
* codec regs listed in proc for all codecs/chips
* adding total regs for each codec
* fixing nb. of steps in input attenuation controls

Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-21 15:44:51 +02:00
Mauro Carvalho Chehab
9b76ede411 V4L/DVB (10771): tea575x-tuner: convert it to V4L2 API
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:02 -03:00
Dmitry Artamonow
323a59613e ALSA: drop outdated and broken sa11xx-uda1341 driver
It depends on L3 support from 2.4 kernel (CONFIG_L3) that never got
merged into mainline. Since there's no way to use it on any of
supported machines (iPaq h3100 or h3600), better drop it for now.
It can be reimplemented later using ASoC infrastructure (there's
already a driver for uda1341 codec in mainline, so only CPU and machine
parts need to be written).

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-17 17:58:13 +01:00
Hans Verkuil
069b747931 V4L/DVB (10138): v4l2-ioctl: change to long return type to match unlocked_ioctl.
Since internal to v4l2 the ioctl prototype is the same regardless of it
being called through .ioctl or .unlocked_ioctl, we need to convert it all
to the long return type of unlocked_ioctl.

Thanks to Jean-Francois Moine for posting an initial patch for this and
thus bringing it to our attention.

Cc: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-02 17:11:34 -02:00
Hans Verkuil
bec43661b1 V4L/DVB (10135): v4l2: introduce v4l2_file_operations.
Introduce a struct v4l2_file_operations for v4l2 drivers.

Remove the unnecessary inode argument.

Move compat32 handling (and llseek) into the v4l2-dev core: this is now
handled in the v4l2 core and no longer in the drivers themselves.

Note that this changeset reverts an earlier patch that changed the return
type of__video_ioctl2 from int to long. This change will be reinstated
later in a much improved version.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-02 17:11:12 -02:00
Igor M. Liplianin
4b29631db3 V4L/DVB (9533): cx88: Add support for TurboSight TBS8910 DVB-S PCI card
The card based on stv0299 or stv0288 demodulators.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29 17:53:28 -02:00
Hans Verkuil
c170ecf434 V4L/DVB (8788): v4l: replace video_get_drvdata(video_devdata(filp)) with video_drvdata(filp)
Use the new video_drvdata(filp) function where it is safe to do so.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12 09:36:54 -02:00
Hans Verkuil
2f3d00250a V4L/DVB (8777): tea575x-tuner: replace video_exclusive_open/release
Move the video_exclusive_open/release functionality into the
driver itself.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12 09:36:53 -02:00
Alexander Beregalov
46480b3a5f ALSA: revo51: add headphone output
It is ALSA bug #1754.
 D6 bit in 02 register is PW4.

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25 09:57:17 +02:00
Takashi Iwai
5e246b850d ALSA: Kill snd_assert() in other places
Kill snd_assert() in other places, either removed or replaced with
if () with snd_BUG_ON().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13 11:46:40 +02:00
Hans Verkuil
0ea6bc8d43 V4L/DVB (8523): v4l2-dev: remove unused type and type2 field from video_device
The type and type2 fields were unused and so could be removed.
Instead add a vfl_type field that contains the type of the video
device.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-27 11:07:10 -03:00
Hans Verkuil
322e4095c9 V4L/DVB (8484): videodev: missed two more usages of the removed 'owner' field.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26 12:55:08 -03:00
Adrian Bunk
a72e72469a [ALSA] remove CVS keywords
This patch removes CVS keywords that weren't updated for a long time
from comments.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27 15:56:20 +02:00
Harvey Harrison
48008b598b [ALSA] i2c: cs8427.c use put_unaligned helper
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-19 13:19:15 +02:00
Pavel Hofman
841b23d4d7 [ALSA] some fixes and cleanup for ICE1724 cards
* removing the hack with NON_AKM ak4xxx type
* support for card-specific flags in ak4114_stats
* definition of the flags for corresponding cards

Signed-off-by: Pavel Hofman <dustin@seznam.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:25 +02:00
Pavel Hofman
fdafad6fc2 [ALSA] AK4114 - listing regs in proc
A simple patch for listing AK4114 regs in proc.

Signed-off-by: Pavel Hofman <dustin@seznam.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:09 +02:00
Andy Shevchenko
69252128ec [ALSA] fm801 - Add mute support for FM-only card with FM801 PCI to tuner bridge
This is improvement of the early support of the FM-only cards where the
fm801 chip represents the PCI to tuner bridge.
The tuner initialization isn't included the mute on as well as mute support
via V4L request. Proposed patch should fix this at least for 64-PCR model.

Signed-off-by: Andy Shevchenko <andy@smile.org.ua>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:14 +01:00
Takashi Iwai
9004acc70e [ALSA] Remove sound/driver.h
This header file exists only for some hacks to adapt alsa-driver
tree.  It's useless for building in the kernel.  Let's move a few
lines in it to sound/core.h and remove it.
With this patch, sound/driver.h isn't removed but has just a single
compile warning to include it.  This should be really killed in
future.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:48 +01:00
Pavel Hofman
6632d64b0b [ALSA] switching rate in STAC9460 codec of Prodigy192
* support for switching rate in STAC9460 - using set_rate_val of the akm
infrastructure
* listing all STAC9460 registers in proc
* disabling mpu401 device for Prodigy192 - otherwise the currently
  flawed mpu401 code hangs kernel when opening the midi device
* removing old unused commented-out code

Signed-off-by: Pavel Hofman <dustin@seznam.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:30 +01:00
Takashi Iwai
3b89246778 [ALSA] Check value range in ctl callbacks
Check the value ranges in ctl put callbacks properly (in the rest drivers).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:25 +01:00
Takashi Iwai
02ff132493 [ALSA] ak4xxx - Check value ranges in ctl callbacks
Check the value ranges in ctl put callbacks properly in ak4xxx-adda driver.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:25 +01:00