Commit graph

6277 commits

Author SHA1 Message Date
Linus Torvalds
8fe74cf053 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  Remove two unneeded exports and make two symbols static in fs/mpage.c
  Cleanup after commit 585d3bc06f
  Trim includes of fdtable.h
  Don't crap into descriptor table in binfmt_som
  Trim includes in binfmt_elf
  Don't mess with descriptor table in load_elf_binary()
  Get rid of indirect include of fs_struct.h
  New helper - current_umask()
  check_unsafe_exec() doesn't care about signal handlers sharing
  New locking/refcounting for fs_struct
  Take fs_struct handling to new file (fs/fs_struct.c)
  Get rid of bumping fs_struct refcount in pivot_root(2)
  Kill unsharing fs_struct in __set_personality()
2009-04-02 21:09:10 -07:00
Robin Holt
f5f7eac41d Allow rwlocks to re-enable interrupts
Pass the original flags to rwlock arch-code, so that it can re-enable
interrupts if implemented for that architecture.

Initially, make __raw_read_lock_flags and __raw_write_lock_flags stubs
which just do the same thing as non-flags variants.

Signed-off-by: Petr Tesarik <ptesarik@suse.cz>
Signed-off-by: Robin Holt <holt@sgi.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <linux-arch@vger.kernel.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:05:11 -07:00
Robin Holt
e8c158bb31 Factor out #ifdefs from kernel/spinlock.c to LOCK_CONTENDED_FLAGS
SGI has observed that on large systems, interrupts are not serviced for a
long period of time when waiting for a rwlock.  The following patch series
re-enables irqs while waiting for the lock, resembling the code which is
already there for spinlocks.

I only made the ia64 version, because the patch adds some overhead to the
fast path.  I assume there is currently no demand to have this for other
architectures, because the systems are not so large.  Of course, the
possibility to implement raw_{read|write}_lock_flags for any architecture
is still there.

This patch:

The new macro LOCK_CONTENDED_FLAGS expands to the correct implementation
depending on the config options, so that IRQ's are re-enabled when
possible, but they remain disabled if CONFIG_LOCKDEP is set.

Signed-off-by: Petr Tesarik <ptesarik@suse.cz>
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:05:10 -07:00
Aravind Srinivasan
2c53d9109f relay: fix for possible loss/corruption of produced subbufs
Fix possible loss/corruption of produced subbufs in
relay_subbufs_consumed().

When buf->subbufs_produced wraps around after UINT_MAX and
buf->subbufs_consumed is still < UINT_MAX, the condition

	if (buf->subbufs_consumed > buf->subbufs_produced)

will be true even for certain valid values of subbufs_consumed.  This may
lead to loss or corruption of produced subbufs.

Signed-off-by: Aravind Srinivasan <raa.aars@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Tom Zanussi <zanussi@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:05:05 -07:00
Dmitri Vorobiev
edb79a2132 kexec: vmcoreinfo_data[] can become static
The vmcoreinfo_data[] array is not used outside of kernel/kexec.c, and
can therefore become static. This patch adds the relevant keyword to the
definition of the array.

Noticed by sparse.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:05:04 -07:00
Neil Horman
04d491ab2a kexec: add dmesg log symbols to /proc/vmcoreinfo lists
It would be nice to be able to extract the dmesg log from a vmcore file
without needing to keep the debug symbols for the running kernel handy all
the time.  We have a facility to do this in /proc/vmcore.  This patch adds
the log_buf and log_end symbols to the vmcoreinfo area so that tools (like
makedumpfile) can easily extract the dmesg logs from a vmcore image.

[akpm@linux-foundation.org: several fixes and cleanups]
[akpm@linux-foundation.org: fix unused log_buf_kexec_setup()]
[akpm@linux-foundation.org: build fix]
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Cc: Simon Horman <horms@verge.net.au>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Simon Horman <horms@verge.net.au>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:05:04 -07:00
Oleg Nesterov
1b0f7ffd0e pids: kill signal_struct-> __pgrp/__session and friends
We are wasting 2 words in signal_struct without any reason to implement
task_pgrp_nr() and task_session_nr().

task_session_nr() has no callers since
2e2ba22ea4, we can remove it.

task_pgrp_nr() is still (I believe wrongly) used in fs/autofsX and
fs/coda.

This patch reimplements task_pgrp_nr() via task_pgrp_nr_ns(), and kills
__pgrp/__session and the related helpers.

The change in drivers/char/tty_io.c is cosmetic, but hopefully makes sense
anyway.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Alan Cox <number6@the-village.bc.nu>		[tty parts]
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:05:02 -07:00
Oleg Nesterov
52ee2dfdd4 pids: refactor vnr/nr_ns helpers to make them safe
Inho, the safety rules for vnr/nr_ns helpers are horrible and buggy.

task_pid_nr_ns(task) needs rcu/tasklist depending on task == current.

As for "special" pids, vnr/nr_ns helpers always need rcu.  However, if
task != current, they are unsafe even under rcu lock, we can't trust
task->group_leader without the special checks.

And almost every helper has a callsite which needs a fix.

Also, it is a bit annoying that the implementations of, say,
task_pgrp_vnr() and task_pgrp_nr_ns() are not "symmetrical".

This patch introduces the new helper, __task_pid_nr_ns(), which is always
safe to use, and turns all other helpers into the trivial wrappers.

After this I'll send another patch which converts task_tgid_xxx() as well,
they're are a bit special.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Louis Rilling <Louis.Rilling@kerlabs.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:05:02 -07:00
Oleg Nesterov
2ae448efc8 pids: improve get_task_pid() to fix the unsafe sys_wait4()->task_pgrp()
sys_wait4() does get_pid(task_pgrp(current)), this is not safe.  We can
add rcu lock/unlock around, but we already have get_task_pid() which can
be improved to handle the special pids in more reliable manner.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Louis Rilling <Louis.Rilling@kerlabs.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:05:02 -07:00
Matthew Wilcox
8e654fba4a sysctl: fix suid_dumpable and lease-break-time sysctls
Arne de Bruijn points out that commit
76fdbb25f9 ("coredump masking: bound
suid_dumpable sysctl") mistakenly limits lease-break-time instead of
suid_dumpable.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Reported-by: Arne de Bruijn <kernelbt@arbruijn.dds.nl>
Cc: Kawai, Hidehiro <hidehiro.kawai.ez@hitachi.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:05:01 -07:00
Serge E. Hallyn
11dea19009 proc_sysctl: use CONFIG_PROC_SYSCTL around ipc and utsname proc_handlers
As pointed out by Cedric Le Goater (in response to Alexey's original
comment wrt mqns), ipc_sysctl.c and utsname_sysctl.c are using
CONFIG_PROC_FS, not CONFIG_PROC_SYSCTL, to determine whether to define
the proc_handlers.  Change that.

Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Acked-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:05:01 -07:00
Lai Jiangshan
2355b70fd5 workqueue: avoid recursion in run_workqueue()
1) lockdep will complain when run_workqueue() performs recursion.

2) The recursive implementation of run_workqueue() means that
   flush_workqueue() and its documentation are inconsistent.  This may
   hide deadlocks and other bugs.

3) The recursion in run_workqueue() will poison cwq->current_work, but
   flush_work() and __cancel_work_timer(), etcetera need a reliable
   cwq->current_work.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:05:00 -07:00
Oleg Nesterov
1ee1184485 ptrace_untrace: fix the SIGNAL_STOP_STOPPED check
This bug is ancient too. ptrace_untrace() must not resume the task
if the group stop in progress, we should set TASK_STOPPED instead.

Unfortunately, we still have problems here:

	- if the process/thread was traced, SIGNAL_STOP_STOPPED
	  does not necessary means this thread group is stopped.

	- ptrace breaks the bookkeeping of ->group_stop_count.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:05:00 -07:00
Oleg Nesterov
95a3540da9 ptrace_detach: the wrong wakeup breaks the ERESTARTxxx logic
Another ancient bug. Consider this trivial test-case,

	int main(void)
	{
		int pid = fork();

		if (pid) {
			ptrace(PTRACE_ATTACH, pid, NULL, NULL);
			wait(NULL);
			ptrace(PTRACE_DETACH, pid, NULL, NULL);
		} else {
			pause();
			printf("WE HAVE A KERNEL BUG!!!\n");
		}

		return 0;
	}

the child must not "escape" for sys_pause(), but it can and this was seen
in practice.

This is because ptrace_detach does:

	if (!child->exit_state)
		wake_up_process(child);

this wakeup can happen after this child has already restarted sys_pause(),
because it gets another wakeup from ptrace_untrace().

With or without this patch, perhaps sys_pause() needs a fix.  But this
wakeup also breaks the SIGNAL_STOP_STOPPED logic in ptrace_untrace().

Remove this wakeup.  The caller saw this task in TASK_TRACED state, and
unless it was SIGKILL'ed in between __ptrace_unlink()->ptrace_untrace()
should handle this case correctly.  If it was SIGKILL'ed, we don't need to
wakup the dying tracee too.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:05:00 -07:00
Oleg Nesterov
5dfc80be73 forget_original_parent: do not abuse child->ptrace_entry
By discussion with Roland.

- Use ->sibling instead of ->ptrace_entry to chain the need to be
  release_task'd childs. Nobody else can use ->sibling, this task
  is EXIT_DEAD and nobody can find it on its own list.

- rename ptrace_dead to dead_childs.

- Now that we don't have the "parallel" untrace code, change back
  reparent_thread() to return void, pass dead_childs as an argument.

Actually, I don't understand why do we notify /sbin/init when we
reparent a zombie, probably it is better to reap it unconditionally.

[akpm@linux-foundation.org: s/childs/children/]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "Metzger, Markus T" <markus.t.metzger@intel.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:05:00 -07:00
Oleg Nesterov
39c626ae47 forget_original_parent: split out the un-ptrace part
By discussion with Roland.

- Rename ptrace_exit() to exit_ptrace(), and change it to do all the
  necessary work with ->ptraced list by its own.

- Move this code from exit.c to ptrace.c

- Update the comment in ptrace_detach() to explain the rechecking of
  the child->ptrace.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "Metzger, Markus T" <markus.t.metzger@intel.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:05:00 -07:00
Oleg Nesterov
7f5d3652d4 reparent_thread: fix a zombie leak if /sbin/init ignores SIGCHLD
If /sbin/init ignores SIGCHLD and we re-parent a zombie, it is leaked.
reparent_thread() does do_notify_parent() which sets ->exit_signal = -1 in
this case.  This means that nobody except us can reap it, the detached
task is not visible to do_wait().

Change reparent_thread() to return a boolean (like __pthread_detach) to
indicate that the thread is dead and must be released.  Also change
forget_original_parent() to add the child to ptrace_dead list in this
case.

The naming becomes insane, the next patch does the cleanup.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:59 -07:00
Oleg Nesterov
b1442b055c reparent_thread: fix the "is it traced" check
reparent_thread() uses ptrace_reparented() to check whether this thread is
ptraced, in that case we should not notify the new parent.

But ptrace_reparented() is not exactly correct when the reparented thread
is traced by /sbin/init, because forget_original_parent() has already
changed ->real_parent.

Currently, the only problem is the false notification.  But with the next
patch the kernel crash in this (yes, pathological) case.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:59 -07:00
Oleg Nesterov
0a967a044a reparent_thread: don't call kill_orphaned_pgrp() if task_detached()
If task_detached(p) == T, then either

  a) p is not the main thread, we will find the group leader on the
     ->children list.

or

  b) p is the group leader but its ->exit_state = EXIT_DEAD.  This
     can only happen when the last sub-thread has died, but in that case
     that thread has already called kill_orphaned_pgrp() from
     exit_notify().

In both cases kill_orphaned_pgrp() looks bogus.

Move the task_detached() check up and simplify the code, this is also
right from the "common sense" pov: we should do nothing with the detached
childs, except move them to the new parent's ->children list.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:59 -07:00
Oleg Nesterov
4576145c1e ptrace: fix possible zombie leak on PTRACE_DETACH
When ptrace_detach() takes tasklist, the tracee can be SIGKILL'ed.  If it
has already passed exit_notify() we can leak a zombie, because a) ptracing
disables the auto-reaping logic, and b) ->real_parent was not notified
about the child's death.

ptrace_detach() should follow the ptrace_exit's logic, change the code
accordingly.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Tested-by: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:59 -07:00
Oleg Nesterov
b1b4c6799f ptrace: reintroduce __ptrace_detach() as a callee of ptrace_exit()
No functional changes, preparation for the next patch.

Move the "should we release this child" logic into the separate handler,
__ptrace_detach().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:59 -07:00
Oleg Nesterov
6d69cb87f0 ptrace: simplify ptrace_exit()->ignoring_children() path
ignoring_children() takes parent->sighand->siglock and checks
k_sigaction[SIGCHLD] atomically.  But this buys nothing, we can't get the
"really" wrong result even if we race with sigaction(SIGCHLD).  If we read
the "stale" sa_handler/sa_flags we can pretend it was changed right after
the check.

Remove spin_lock(->siglock), and kill "int ign" which caches the result of
ignoring_children() which becomes rather trivial.

Perhaps it makes sense to export this helper, do_notify_parent() can use
it too.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:59 -07:00
Oleg Nesterov
95c3eb76dc ptrace: kill __ptrace_detach(), fix ->exit_state check
Move the code from __ptrace_detach() to its single caller and kill this
helper.

Also, fix the ->exit_state check, we shouldn't wake up EXIT_DEAD tasks.
Actually, I think task_is_stopped_or_traced() makes more sense, but this
needs another patch.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:59 -07:00
Sukadev Bhattiprolu
6588c1e3ff signals: SI_USER: Masquerade si_pid when crossing pid ns boundary
When sending a signal to a descendant namespace, set ->si_pid to 0 since
the sender does not have a pid in the receiver's namespace.

Note:
	- If rt_sigqueueinfo() sets si_code to SI_USER when sending a
	  signal across a pid namespace boundary, the value in ->si_pid
	  will be cleared to 0.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Daniel Lezcano <daniel.lezcano@free.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:58 -07:00
Sukadev Bhattiprolu
b3bfa0cba8 signals: protect cinit from blocked fatal signals
Normally SIG_DFL signals to global and container-init are dropped early.
But if a signal is blocked when it is posted, we cannot drop the signal
since the receiver may install a handler before unblocking the signal.
Once this signal is queued however, the receiver container-init has no way
of knowing if the signal was sent from an ancestor or descendant
namespace.  This patch ensures that contianer-init drops all SIG_DFL
signals in get_signal_to_deliver() except SIGKILL/SIGSTOP.

If SIGSTOP/SIGKILL originate from a descendant of container-init they are
never queued (i.e dropped in sig_ignored() in an earler patch).

If SIGSTOP/SIGKILL originate from parent namespace, the signal is queued
and container-init processes the signal.

IOW, if get_signal_to_deliver() sees a sig_kernel_only() signal for global
or container-init, the signal must have been generated internally or must
have come from an ancestor ns and we process the signal.

Further, the signal_group_exit() check was needed to cover the case of a
multi-threaded init sending SIGKILL to other threads when doing an exit()
or exec().  But since the new sig_kernel_only() check covers the SIGKILL,
the signal_group_exit() check is no longer needed and can be removed.

Finally, now that we have all pieces in place, set SIGNAL_UNKILLABLE for
container-inits.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Daniel Lezcano <daniel.lezcano@free.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:58 -07:00
Sukadev Bhattiprolu
e4da026f98 signals: zap_pid_ns_process() should use force_sig()
send_signal() assumes that signals with SEND_SIG_PRIV are generated from
within the same namespace.  So any nested container-init processes become
immune to the SIGKILL generated by kill_proc_info() in
zap_pid_ns_processes().

Use force_sig() in zap_pid_ns_processes() instead - force_sig() clears the
SIGNAL_UNKILLABLE flag ensuring the signal is processed by
container-inits.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Daniel Lezcano <daniel.lezcano@free.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:58 -07:00
Sukadev Bhattiprolu
921cf9f630 signals: protect cinit from unblocked SIG_DFL signals
Drop early any SIG_DFL or SIG_IGN signals to container-init from within
the same container.  But queue SIGSTOP and SIGKILL to the container-init
if they are from an ancestor container.

Blocked, fatal signals (i.e when SIG_DFL is to terminate) from within the
container can still terminate the container-init.  That will be addressed
in the next patch.

Note:	To be bisect-safe, SIGNAL_UNKILLABLE will be set for container-inits
   	in a follow-on patch. Until then, this patch is just a preparatory
	step.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Daniel Lezcano <daniel.lezcano@free.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:58 -07:00
Sukadev Bhattiprolu
7978b567d3 signals: add from_ancestor_ns parameter to send_signal()
send_signal() (or its helper) needs to determine the pid namespace of the
sender.  But a signal sent via kill_pid_info_as_uid() comes from within
the kernel and send_signal() does not need to determine the pid namespace
of the sender.  So define a helper for send_signal() which takes an
additional parameter, 'from_ancestor_ns' and have kill_pid_info_as_uid()
use that helper directly.

The 'from_ancestor_ns' parameter will be used in a follow-on patch.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Daniel Lezcano <daniel.lezcano@free.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:58 -07:00
Oleg Nesterov
f008faff0e signals: protect init from unwanted signals more
(This is a modified version of the patch submitted by Oleg Nesterov
http://lkml.org/lkml/2008/11/18/249 and tries to address comments that
came up in that discussion)

init ignores the SIG_DFL signals but we queue them anyway, including
SIGKILL.  This is mostly OK, the signal will be dropped silently when
dequeued, but the pending SIGKILL has 2 bad implications:

        - it implies fatal_signal_pending(), so we confuse things
          like wait_for_completion_killable/lock_page_killable.

        - for the sub-namespace inits, the pending SIGKILL can
          mask (legacy_queue) the subsequent SIGKILL from the
          parent namespace which must kill cinit reliably.
          (preparation, cinits don't have SIGNAL_UNKILLABLE yet)

The patch can't help when init is ptraced, but ptracing of init is not
"safe" anyway.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Daniel Lezcano <daniel.lezcano@free.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:58 -07:00
Oleg Nesterov
43918f2bf4 signals: remove 'handler' parameter to tracehook functions
Container-init must behave like global-init to processes within the
container and hence it must be immune to unhandled fatal signals from
within the container (i.e SIG_DFL signals that terminate the process).

But the same container-init must behave like a normal process to processes
in ancestor namespaces and so if it receives the same fatal signal from a
process in ancestor namespace, the signal must be processed.

Implementing these semantics requires that send_signal() determine pid
namespace of the sender but since signals can originate from workqueues/
interrupt-handlers, determining pid namespace of sender may not always be
possible or safe.

This patchset implements the design/simplified semantics suggested by
Oleg Nesterov.  The simplified semantics for container-init are:

	- container-init must never be terminated by a signal from a
	  descendant process.

	- container-init must never be immune to SIGKILL from an ancestor
	  namespace (so a process in parent namespace must always be able
	  to terminate a descendant container).

	- container-init may be immune to unhandled fatal signals (like
	  SIGUSR1) even if they are from ancestor namespace. SIGKILL/SIGSTOP
	  are the only reliable signals to a container-init from ancestor
	  namespace.

This patch:

Based on an earlier patch submitted by Oleg Nesterov and comments from
Roland McGrath (http://lkml.org/lkml/2008/11/19/258).

The handler parameter is currently unused in the tracehook functions.
Besides, the tracehook functions are called with siglock held, so the
functions can check the handler if they later need to.

Removing the parameter simiplifies changes to sig_ignored() in a follow-on
patch.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Daniel Lezcano <daniel.lezcano@free.fr>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:58 -07:00
Oleg Nesterov
90bc8d8b1a do_wait: fix waiting for the group stop with the dead leader
do_wait(WSTOPPED) assumes that p->state must be == TASK_STOPPED, this is
not true if the leader is already dead.  Check SIGNAL_STOP_STOPPED instead
and use signal->group_exit_code.

Trivial test-case:

	void *tfunc(void *arg)
	{
		pause();
		return NULL;
	}

	int main(void)
	{
		pthread_t thr;
		pthread_create(&thr, NULL, tfunc, NULL);
		pthread_exit(NULL);
		return 0;
	}

It doesn't react to ^Z (and then to ^C or ^\). The task is stopped, but
bash can't see this.

The bug is very old, and it was reported multiple times. This patch was sent
more than a year ago (http://marc.info/?t=119713920000003) but it was ignored.

This change also fixes other oddities (but not all) in this area.  For
example, before this patch:

	$ sleep 100
	^Z
	[1]+  Stopped                 sleep 100
	$ strace -p `pidof sleep`
	Process 11442 attached - interrupt to quit

strace hangs in do_wait(), because ->exit_code was already consumed by
bash.  After this patch, strace happily proceeds:

	--- SIGTSTP (Stopped) @ 0 (0) ---
	restart_syscall(<... resuming interrupted call ...>

To me, this looks much more "natural" and correct.

Another example.  Let's suppose we have the main thread M and sub-thread
T, the process is stopped, and its parent did wait(WSTOPPED).  Now we can
ptrace T but not M.  This looks at least strange to me.

Imho, do_wait() should not confuse the per-thread ptrace stops with the
per-process job control stops.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: Kaz Kylheku <kkylheku@gmail.com>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:57 -07:00
David Rientjes
6d7b2f5f9e cpusets: prevent PF_THREAD_BOUND tasks from attaching to non-root cpusets
Kthreads that have the PF_THREAD_BOUND bit set in their flags are bound to a
specific cpu.  Thus, their set of allowed cpus shall not change.

This patch prevents such threads from attaching to non-root cpusets.  They do
not have mempolicies that restrict them to a subset of system nodes and, since
their cpumask may never change, they cannot use any of the features of
cpusets.

The tasks will forever be a member of the root cpuset and will be returned
when listing the tasks attached to that cpuset.

Cc: Paul Menage <menage@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:57 -07:00
Paul Menage
db7f47cf48 cpusets: allow cpusets to be configured/built on non-SMP systems
Allow cpusets to be configured/built on non-SMP systems

Currently it's impossible to build cpusets under UML on x86-64, since
cpusets depends on SMP and x86-64 UML doesn't support SMP.

There's code in cpusets that doesn't depend on SMP.  This patch surrounds
the minimum amount of cpusets code with #ifdef CONFIG_SMP in order to
allow cpusets to build/run on UP systems (for testing purposes under UML).

Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Paul Menage <menage@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:57 -07:00
David Rientjes
a1bc5a4eee cpusets: replace zone allowed functions with node allowed
The cpuset_zone_allowed() variants are actually only a function of the
zone's node.

Cc: Paul Menage <menage@google.com>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:57 -07:00
Li Zefan
7f81b1ae18 cpuset: remove struct cpuset_hotplug_scanner
Use cgroup_scanner.data, instead of introducing cpuset_hotplug_scanner.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:57 -07:00
Li Zefan
010cfac4ca cpuset: avoid changing cpuset's mems when errno returned
When writing to cpuset.mems, cpuset has to update its mems_allowed before
calling update_tasks_nodemask(), but this function might return -ENOMEM.

To avoid this rare case, we allocate the memory before changing
mems_allowed, and then pass to update_tasks_nodemask().  Similar to what
update_cpumask() does.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:57 -07:00
Li Zefan
3b6766fe66 cpuset: rewrite update_tasks_nodemask()
This patch uses cgroup_scan_tasks() to rebind tasks' vmas to new cpuset's
mems_allowed.

Not only simplify the code largely, but also avoid allocating an array to
hold mm pointers of all the tasks in the cpuset.  This array can be big
(size > PAGESIZE) if we have lots of tasks in that cpuset, thus has a
chance to fail the allocation when under memory stress.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:57 -07:00
Li Zefan
0b4217b3fd cpuset: fix possible races in cpu/memory hotplug
Change to cpuset->cpus_allowed and cpuset->mems_allowed should be protected
by callback_mutex, otherwise the reader may read wrong cpus/mems. This is
cpuset's lock rule.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:56 -07:00
KAMEZAWA Hiroyuki
0b7f569e45 memcg: fix OOM killer under memcg
This patch tries to fix OOM Killer problems caused by hierarchy.
Now, memcg itself has OOM KILL function (in oom_kill.c) and tries to
kill a task in memcg.

But, when hierarchy is used, it's broken and correct task cannot
be killed. For example, in following cgroup

	/groupA/	hierarchy=1, limit=1G,
		01	nolimit
		02	nolimit
All tasks' memory usage under /groupA, /groupA/01, groupA/02 is limited to
groupA's 1Gbytes but OOM Killer just kills tasks in groupA.

This patch provides makes the bad process be selected from all tasks
under hierarchy. BTW, currently, oom_jiffies is updated against groupA
in above case. oom_jiffies of tree should be updated.

To see how oom_jiffies is used, please check mem_cgroup_oom_called()
callers.

[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: const fix]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:55 -07:00
Li Zefan
d969fbe69e debug cgroup: remove unneeded cgroup_lock
Since we are in cgroup write handler, so the cgrp is valid, so we don't
have to hold cgroup_mutex when calling cgroup_task_count().  One similar
example is in cgroup_tasks_open().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:54 -07:00
Li Zefan
0670e08bdf cgroups: don't change release_agent when remount failed
Remount can fail in either case:
  - wrong mount options is specified, or option 'noprefix' is changed.
  - a to-be-added subsys is already mounted/active.

When using remount to change 'release_agent', for the above former failure
case, remount will return errno with release_agent unchanged, but for the
latter case, remount will return EBUSY with relase_agent changed, which is
unexpected I think:

 # mount -t cgroup -o cpu xxx /cgrp1
 # mount -t cgroup -o cpuset,release_agent=agent1 yyy /cgrp2
 # cat /cgrp2/release_agent
 agent1
 # mount -t cgroup -o remount,cpuset,noprefix,release_agent=agent2 yyy /cgrp2
 mount: /cgrp2 not mounted already, or bad option
 # cat /cgrp2/release_agent
 agent1     <-- ok
 # mount -t cgroup -o remount,cpu,cpuset,release_agent=agent2 yyy /cgrp2
 mount: /cgrp2 is busy
 # cat /cgrp2/release_agent
 agent2     <-- unexpected!

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:54 -07:00
Li Zefan
099fca3225 cgroups: show correct file mode
We have some read-only files and write-only files, but currently they are
all set to 0644, which is counter-intuitive and cause trouble for some
cgroup tools like libcgroup.

This patch adds 'mode' to struct cftype to allow cgroup subsys to set it's
own files' file mode, and for the most cases cft->mode can be default to 0
and cgroup will figure out proper mode.

Acked-by: Paul Menage <menage@google.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:54 -07:00
Jesper Juhl
66bdc9cfc7 kernel/cgroup.c: kfree(NULL) is legal
Reduces object file size a bit:

Before:
$ size kernel/cgroup.o
   text    data     bss     dec     hex filename
  21593    7804    4924   34321    8611 kernel/cgroup.o
After:
$ size kernel/cgroup.o
   text    data     bss     dec     hex filename
  21537    7744    4924   34205    859d kernel/cgroup.o

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:54 -07:00
KAMEZAWA Hiroyuki
ec64f51545 cgroup: fix frequent -EBUSY at rmdir
In following situation, with memory subsystem,

	/groupA use_hierarchy==1
		/01 some tasks
		/02 some tasks
		/03 some tasks
		/04 empty

When tasks under 01/02/03 hit limit on /groupA, hierarchical reclaim
is triggered and the kernel walks tree under groupA. In this case,
rmdir /groupA/04 fails with -EBUSY frequently because of temporal
refcnt from the kernel.

In general. cgroup can be rmdir'd if there are no children groups and
no tasks. Frequent fails of rmdir() is not useful to users.
(And the reason for -EBUSY is unknown to users.....in most cases)

This patch tries to modify above behavior, by
	- retries if css_refcnt is got by someone.
	- add "return value" to pre_destroy() and allows subsystem to
	  say "we're really busy!"

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:54 -07:00
KAMEZAWA Hiroyuki
38460b48d0 cgroup: CSS ID support
Patch for Per-CSS(Cgroup Subsys State) ID and private hierarchy code.

This patch attaches unique ID to each css and provides following.

 - css_lookup(subsys, id)
   returns pointer to struct cgroup_subysys_state of id.
 - css_get_next(subsys, id, rootid, depth, foundid)
   returns the next css under "root" by scanning

When cgroup_subsys->use_id is set, an id for css is maintained.

The cgroup framework only parepares
	- css_id of root css for subsys
	- id is automatically attached at creation of css.
	- id is *not* freed automatically. Because the cgroup framework
	  don't know lifetime of cgroup_subsys_state.
	  free_css_id() function is provided. This must be called by subsys.

There are several reasons to develop this.
	- Saving space .... For example, memcg's swap_cgroup is array of
	  pointers to cgroup. But it is not necessary to be very fast.
	  By replacing pointers(8bytes per ent) to ID (2byes per ent), we can
	  reduce much amount of memory usage.

	- Scanning without lock.
	  CSS_ID provides "scan id under this ROOT" function. By this, scanning
	  css under root can be written without locks.
	  ex)
	  do {
		rcu_read_lock();
		next = cgroup_get_next(subsys, id, root, &found);
		/* check sanity of next here */
		css_tryget();
		rcu_read_unlock();
		id = found + 1
	 } while(...)

Characteristics:
	- Each css has unique ID under subsys.
	- Lifetime of ID is controlled by subsys.
	- css ID contains "ID" and "Depth in hierarchy" and stack of hierarchy
	- Allowed ID is 1-65535, ID 0 is UNUSED ID.

Design Choices:
	- scan-by-ID v.s. scan-by-tree-walk.
	  As /proc's pid scan does, scan-by-ID is robust when scanning is done
	  by following kind of routine.
	  scan -> rest a while(release a lock) -> conitunue from interrupted
	  memcg's hierarchical reclaim does this.

	- When subsys->use_id is set, # of css in the system is limited to
	  65535.

[bharata@linux.vnet.ibm.com: remove rcu_read_lock() from css_get_next()]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:53 -07:00
Grzegorz Nosek
313e924c08 cgroups: relax ns_can_attach checks to allow attaching to grandchild cgroups
The ns_proxy cgroup allows moving processes to child cgroups only one
level deep at a time.  This commit relaxes this restriction and makes it
possible to attach tasks directly to grandchild cgroups, e.g.:

($pid is in the root cgroup)
echo $pid > /cgroup/CG1/CG2/tasks

Previously this operation would fail with -EPERM and would have to be
performed as two steps:
echo $pid > /cgroup/CG1/tasks
echo $pid > /cgroup/CG1/CG2/tasks

Also, the target cgroup no longer needs to be empty to move a task there.

Signed-off-by: Grzegorz Nosek <root@localdomain.pl>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:53 -07:00
Alexey Dobriyan
6f2c55b843 Simplify copy_thread()
First argument unused since 2.3.11.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:51 -07:00
David Howells
33e5d76979 nommu: fix a number of issues with the per-MM VMA patch
Fix a number of issues with the per-MM VMA patch:

 (1) Make mmap_pages_allocated an atomic_long_t, just in case this is used on
     a NOMMU system with more than 2G pages.  Makes no difference on a 32-bit
     system.

 (2) Report vma->vm_pgoff * PAGE_SIZE as a 64-bit value, not a 32-bit value,
     lest it overflow.

 (3) Move the allocation of the vm_area_struct slab back for fork.c.

 (4) Use KMEM_CACHE() for both vm_area_struct and vm_region slabs.

 (5) Use BUG_ON() rather than if () BUG().

 (6) Make the default validate_nommu_regions() a static inline rather than a
     #define.

 (7) Make free_page_series()'s objection to pages with a refcount != 1 more
     informative.

 (8) Adjust the __put_nommu_region() banner comment to indicate that the
     semaphore must be held for writing.

 (9) Limit the number of warnings about munmaps of non-mmapped regions.

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:48 -07:00
Davide Libenzi
4ede816ac3 epoll keyed wakeups: add __wake_up_locked_key() and __wake_up_sync_key()
This patchset introduces wakeup hints for some of the most popular (from
epoll POV) devices, so that epoll code can avoid spurious wakeups on its
waiters.

The problem with epoll is that the callback-based wakeups do not, ATM,
carry any information about the events the wakeup is related to.  So the
only choice epoll has (not being able to call f_op->poll() from inside the
callback), is to add the file* to a ready-list and resolve the real events
later on, at epoll_wait() (or its own f_op->poll()) time.  This can cause
spurious wakeups, since the wake_up() itself might be for an event the
caller is not interested into.

The rate of these spurious wakeup can be pretty high in case of many
network sockets being monitored.

By allowing devices to report the events the wakeups refer to (at least
the two major classes - POLLIN/POLLOUT), we are able to spare useless
wakeups by proper handling inside the epoll's poll callback.

Epoll will have in any case to call f_op->poll() on the file* later on,
since the change to be done in order to have the full event set sent via
wakeup, is too invasive for the way our f_op->poll() system works (the
full event set is calculated inside the poll function - there are too many
of them to even start thinking the change - also poll/select would need
change too).

Epoll is changed in a way that both devices which send event hints, and
the ones that don't, are correctly handled.  The former will gain some
efficiency though.

As a general rule for devices, would be to add an event mask by using
key-aware wakeup macros, when making up poll wait queues.  I tested it
(together with the epoll's poll fix patch Andrew has in -mm) and wakeups
for the supported devices are correctly filtered.

Test program available here:

http://www.xmailserver.org/epoll_test.c

This patch:

Nothing revolutionary here.  Just using the available "key" that our
wakeup core already support.  The __wake_up_locked_key() was no brainer,
since both __wake_up_locked() and __wake_up_locked_key() are thin wrappers
around __wake_up_common().

The __wake_up_sync() function had a body, so the choice was between
borrowing the body for __wake_up_sync_key() and calling it from
__wake_up_sync(), or make an inline and calling it from both.  I chose the
former since in most archs it all resolves to "mov $0, REG; jmp ADDR".

Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: William Lee Irwin III <wli@movementarian.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:20 -07:00
Magnus Damm
a8af78982f pm: rework includes, remove arch ifdefs
Make the following header file changes:

 - remove arch ifdefs and asm/suspend.h from linux/suspend.h
 - add asm/suspend.h to disk.c (for arch_prepare_suspend())
 - add linux/io.h to swsusp.c (for ioremap())
 - x86 32/64 bit compile fixes

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Cc: Paul Mundt <lethal@linux-sh.org>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:16 -07:00