Commit graph

696 commits

Author SHA1 Message Date
Tony Lindgren
27dba4bcf8 Merge branch 'for_2.6.33rc_c' of git://git.pwsan.com/linux-2.6 into omap-fixes-for-linus 2010-01-08 14:27:56 -08:00
Paul Walmsley
4e37c10d8a OMAP clock/CPUFreq: add clk_exit_cpufreq_table()
A subsequent patch adds code on OMAP2xxx to dynamically allocate the
CPUFreq frequency table in clk_init_cpufreq_table(), so for it to
avoid a leak, it will need a corresponding function to free the
memory.  This patch adds clk_exit_cpufreq_table() with generic
code to call a chip-specific variant inside the clockfw_lock spinlock via
struct clk_functions.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-08 15:23:16 -07:00
Paul Walmsley
d1e6249821 OMAP clock: remove incorrect EXPORT_SYMBOL()s
The only symbols that should be exported are symbols that are to be
called from loadable kernel modules, e.g., device drivers.  In the
context of plat-omap/clock.c, these should only be the Linux clock
interface symbols as defined by include/linux/clk.h.  Core code
doesn't need these symbols to be exported.  Also, clean up an old
comment while here.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-08 15:23:09 -07:00
Paul Walmsley
51e888d705 OMAP2420 IO mapping: move IVA mapping virtual address out of vmalloc space
Commit 10db25fea4 causes the following
kernel messages during N800 boot (and presumably all other 2420
boards):

[    0.000000] BUG: mapping for 0x58000000 at 0xe0000000 overlaps vmalloc space
[    0.000000] BUG: mapping for 0x59000000 at 0xe1000000 overlaps vmalloc space
[    0.000000] BUG: mapping for 0x5a000000 at 0xe2000000 overlaps vmalloc space

Fix by remapping the IVA memory areas somewhere outside vmalloc space.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
2010-01-08 15:23:06 -07:00
Paul Walmsley
7adb998717 OMAP2xxx IO mapping: mark DSP mappings as being 2420-only
Out of the three major OMAP2 chip types, OMAP2420, OMAP2430, and OMAP3430,
we only map the IVA on OMAP2420.  The memory mapping is not shared between
OMAP2420 and OMAP2430, so it is inappropriate to label those macros as
'24XX'; this patch changes them to '2420'.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-08 15:23:05 -07:00
Roel Kluin
83969bfa20 omap3: add missing parentheses
not(!) has a higher precedence than bit and(&).

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-01-08 10:29:07 -08:00
Tony Lindgren
66215949e6 omap1: Fix compile for omap1_bl.c
Commit 9905a43b made struct backlight_ops const. Omap was
setting check_fb dynamically, which caused the following
compile error:

drivers/video/backlight/omap1_bl.c: In function 'omapbl_probe':
drivers/video/backlight/omap1_bl.c:142: error: assignment of read-only variable 'omapbl_ops'

Turns out pdata->check_fb is not being used, so just remove
it to fix the compile.

Cc: Emese Revfy <re.emese@gmail.com>
Cc: Richard Purdie <rpurdie@linux.intel.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-01-08 10:29:06 -08:00
Cory Maccarrone
c5c4dce45d omap1: Add 7xx clocks and pin muxes for SPI
Commit 35c9049b27 added
drivers/spi/omap_spi_100k.c.

This patch add the related clocks and pin muxing
entries to make the driver work on omap7xx platforms.

Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-01-08 10:29:05 -08:00
Tony Lindgren
4cc6420c12 omap: Remove uninitialized warning for gpio.c
Flags is not used on 15xx.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-01-08 10:29:05 -08:00
Roel Kluin
acf9d467dc omap: &&/|| confusion in iommu_put()
obj can't be both NULL and be an error pointer.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-01-08 10:29:05 -08:00
Cory Maccarrone
4318f36b7c omap: gpio: Simultaneously requested rising and falling edge
Some chips, namely any OMAP1 chips using METHOD_MPUIO,
OMAP15xx and OMAP7xx, cannot be setup to respond to on-chip GPIO
interrupts in both rising and falling edge directions -- they can
only respond to one direction or the other, depending on how the
ICR is configured.

Additionally, current code forces rising edge detection if both
flags are specified:

        if (trigger & IRQ_TYPE_EDGE_RISING)
                l |= 1 << gpio;
        else if (trigger & IRQ_TYPE_EDGE_FALLING)
                l &= ~(1 << gpio);
        else
                goto bad;

This change implements a toggle function that will modify the ICR
to flip the direction of interrupt for IRQs that are requested with
both rising and falling flags.  The toggle function is not called
for chips and GPIOs it does not apply to through the use of a flip_mask
that's added on a per-bank basis.  The mask is only set for those
GPIOs where a toggle is necessary.  Edge detection starts out the
same as above with FALLING mode first.

The toggle happens on EACH interrupt; without it, we have the
following sequence of actions on GPIO transition:

  ICR    GPIO               Result
  0x1    0 -> 1 (rising)    Interrupt
  0x1    1 -> 0 (falling)   No interrupt

  (set ICR to 0x0 manually)
  0x0    0 -> 1 (rising)    No interrupt
  0x0    1 -> 0 (falling)   Interrupt

That is, with the ICR set to 1 for a gpio, only rising edge interrupts
are caught, and with it set to 0, only falling edge interrupts are
caught.  If we add in the toggle, we get this:

  ICR    GPIO               Result
  0x1    0 -> 1 (rising)    Interrupt (ICR set to 0x0)
  0x0    1 -> 0 (falling)   Interrupt (ICR set to 0x1)
  0x1    0 -> 1 ...

so, both rising and falling are caught, per the request for both
(IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING).

Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-01-08 10:29:04 -08:00
Janusz Krzysztofik
1866b54525 omap: McBSP: Fix possible port lockout
In its current form, the omap_mcbsp_request() function can return after
irq_request() failure without any cleanups, effectively locking out the port
forever with clocks left running. Fix it.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-01-08 10:29:04 -08:00
Alexey Dobriyan
471452104b const: constify remaining dev_pm_ops
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:25 -08:00
Balaji T K
e8deb28ca8 mfd: Add support for twl6030 irq framework
This patch adds support for phoenix interrupt framework. New iInterrupt
status register A, B, C are introduced in Phoenix and are cleared on write.
Due to the differences in interrupt handling with respect to TWL4030,
twl6030-irq.c is created for TWL6030 PMIC

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-14 00:25:31 +01:00
Sanjeev Premi
435bb82749 omap3: Fix OMAP35XX_REV macros
In original implementation, the revision passed to
these macros contained revision number in lower nibble.

But, later the revision bits (OMAP_REVBITS_XX) were
defined to use omap_revision[15:08] where revision
number is containied in higher nibble.

This patch updates the macros; else incorrect revision
is detected for OMAP35xx devices.

Signed-off-by: Sanjeev Premi <premi@ti.com>
2009-12-11 16:16:37 -08:00
Sergey Lapin
0712fb39d7 omap3: id code detection 3525 vs 3515
The runtime detection of OMAP3515 and OMAP3525
was reversed.

Signed-off-by: Sergey Lapin <slapin@ossfans.org>
Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11 16:16:37 -08:00
vikram pandita
9cb87a6b44 omap: header: remove unused data-type
Remove unused data type omap_gpio_switch_config

Thereby also get rid of following sparse warnings:
arch/arm/plat-omap/include/plat/board.h :121:20:
	warning: dubious bitfield without explicit `signed' or `unsigned'
arch/arm/plat-omap/include/plat/board.h :122:19:
	warning: dubious bitfield without explicit `signed' or `unsigned'
arch/arm/plat-omap/include/plat/board.h :123:24:
	warning: dubious bitfield without explicit `signed' or `unsigned'

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11 16:16:36 -08:00
Ladislav Michl
3bfe8971a8 omap: arch/arm/plat-omap/devices.c - sort alphabetically
Comment in omap_init_devices asks to keep init calls and their
implementations in alphabetical order, so let it be that way.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11 16:16:36 -08:00
Vimal Singh
8fe8acbe5a omap: Correcting GPMC_CONFIG1_DEVICETYPE_NAND
For NAND devices '2' should be used with GPMC_CONFIG1_DEVICETYPE
instead of '1'.

Signed-off-by: Vimal Singh <vimalsingh@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11 16:16:35 -08:00
Mika Westerberg
f62349ee97 OMAP3: serial - allow platforms specify which UARTs to initialize
This patch adds new function: omap_serial_init_port(port) that can be
used to initialize only selected UARTs as serial ports. Platforms can
then in their board files call this function instead of omap_serial_init()
if they don't want to use all UARTs as serial ports.

Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11 16:16:35 -08:00
Santosh Shilimkar
942e2c9e52 OMAP4: AuxCoreBoot registers only accessible in secure mode
The AuxCoreBoot0 and AuxCoreBoot1 can be only accessed in secure
mode. Replace the current code with secure monitor API's to access/modify
these registers.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11 16:16:35 -08:00
Santosh Shilimkar
a7c3ae2cb6 OMAP4: Fix SRAM base and size
This patch fixes the public sram base address and available
size on OMAP4430.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11 16:16:35 -08:00
Santosh Shilimkar
b570e0ec25 OMAP4: Fix cpu detection
This patch fixes the OMAP4430 cpu detection. The IC rev detection is
done with hawkeye and rev. Note that rev does not map directly to
defined processor revision numbers as ES1.0 uses value 0.It also fixes
the SCM base address to read the correct ID_CODE register.

Also the cpu_is_omap44xx() and cpu_is_omap443x() correctly populated
instead of always being true

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11 16:16:34 -08:00
Cory Maccarrone
bf92a40762 omap1: I2C mux and clocks for omap7xx
This change adds MUX pin configuration and clocks for I2C support
to OMAP 730 and 850-based devices.

Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11 16:16:34 -08:00
Cory Maccarrone
106997c1a4 omap1: Add omap7xx USB support
This change implements USB client side support into the HTC
Herald board configuration.  It uses a similar, but updated
algorithm to initialize the USB as is used in the linwizard
project.

Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11 16:16:34 -08:00
Janusz Krzysztofik
f8e9e98454 omap1: DMA: move LCD related code from plat-omap to mach-omap1
All of the LCD DMA code in plat-omap/dma.c appears to be OMAP1-only (and
apparently only is available on a subset of OMAP1 chips).

Move this code to mach-omap1/lcd_dma.c.

Tested on OMAP1510 Amstrad Delta.
Compile-tested with omap_generic_2420_defconfig.

Reported-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Reviewed-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11 16:16:33 -08:00
Ladislav Michl
3bc4801478 omap: use smc91x_platdata to setup smc91x
Use smc91x_platdata to setup smc91x, so we can get rid of OMAP specific stuff
in smc91x driver

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11 16:16:33 -08:00
Tony Lindgren
15f45e6f27 omap: mux: Remove old mux code for 34xx
Remove old mux code for 34xx

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11 16:16:33 -08:00
Tony Lindgren
b63128e812 omap: Split i2c platform init for mach-omap1 and mach-omap2
Otherwise we cannot limit new mux code to mach-omap2.
The same signal names should eventually work for other
omaps under mach-omap2.

Note that these pins don't need to be OMAP_PIN_INPUT_PULLUP,
just OMAP_PIN_INPUT is enough.

Cc: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11 16:16:32 -08:00
Tony Lindgren
15ac7afe51 omap: mux: Add new style pin multiplexing code for omap3
Initially only for 34xx. This code allows us to:

- Make the code more generic as the omap internal signal
  names can stay the same across omap generations for some
  devices

- Map mux registers to GPIO registers that is needed for
  dynamic muxing of pins during off-idle

- Override bootloader mux values via kernel cmdline using
  omap_mux=some.signa1=0x1234,some.signal2=0x1234

- View and set the mux registers via debugfs if
  CONFIG_DEBUG_FS is enabled

Cc: Mike Rapoport <mike@compulab.co.il>
Cc: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11 16:16:32 -08:00
Rajendra Nayak
d79b126724 ARM: OMAP4: PM: Add dummy hooks for OMAP4 dpll api's
This patch adds dummy hooks for OMAP4 dpll api's. Removes
dummy hooks for clkdev api's and enables CLKDEV
for OMAP4.
Also comments clockdomain calls from within the clock
framework as its not supported yet for OMAP4.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-11 17:00:46 -07:00
Rajendra Nayak
972c542746 ARM: OMAP4: PM: OMAP4 clock tree and clkdev registration
This patch defines all the clock nodes in OMAP4430
platform. All the clock node structs and the clkdev table is
autogenerated using a python script (gen_clock_tree.py)
developed by Paul Walmsley, Benoit Cousson and Rajendra Nayak.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-11 17:00:45 -07:00
Rajendra Nayak
9ef89150ea ARM: OMAP4: PM: Fix the PRM and CM base addresses
This patch fixes the PRM and CM base addresses and adds
a new CM2 base address for OMAP4

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-11 17:00:44 -07:00
Kevin Hilman
0d93d8bb7f OMAP: omap_device: track latency in nanoseconds
Rather than having to do a usecs = nsecs / NSECS_PER_USEC to
track latency in usecs, just track it in nanoseconds.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11 17:00:44 -07:00
Kevin Hilman
d048ec7ab4 OMAP: omap_device: fix nsec/usec conversion in latency calculations
Use

   usecs = nsecs / NSEC_PER_USEC;

instead of

   usecs = nsecs * NSEC_PER_USEC;

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11 17:00:44 -07:00
Kevin Hilman
d22926677f OMAP: omap_device: use read_persistent_clock() instead of getnstimeofday()
During suspend and resume, when omap_device deactivation and
activation is happening, the timekeeping subsystem has likely already
been suspended.  Thus getnstimeofday() will fail and trigger a WARN().

Use read_persistent_clock() instead of getnstimeofday() to avoid this.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11 17:00:44 -07:00
Kevin Hilman
5f1b6ef76f OMAP: omap_device: use UINT_MAX for default wakeup latency limit
The _dev_wakeup_lat_limit field of struct omap_device is u32, so use
UINT_MAX instead of INT_MAX for the default maximum.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11 17:00:44 -07:00
Kevin Hilman
a470c42cb8 OMAP: omap_device: add to_omap_device() macro
Following the model of to_platform_device(), add to_omap_device()
macro so a platform_device pointer can be converted into an
omap_device pointer.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11 17:00:43 -07:00
Paul Walmsley
718bfd7693 OMAP hwmod: add names to module MPU IRQ lines
Replace the existing u8 array of module MPU IRQ lines with a struct
that includes a name - similar to the existing struct
omap_hwmod_dma_info.  Device drivers can then use
platform_get_resource_byname() to retrieve specific IRQs without nasty
dependencies on array ordering.

Thanks to Benoît Cousson <b-cousson@ti.com> and Kevin Hilman
<khilman@deeprootsystems.com> for feedback on this approach.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
2009-12-11 17:00:43 -07:00
Paul Walmsley
726072e5dd OMAP3 hwmod: Add automatic OCP_SYSCONFIG AUTOIDLE handling
This patch fills in the OCP_SYSCONFIG.AUTOIDLE handling in the OMAP
hwmod code.

After this patch, the hwmod code will set the module AUTOIDLE bit
(generally <module>.OCP_SYSCONFIG.AUTOIDLE) to 1 by default upon
enable.  If the hwmod flag HWMOD_NO_OCP_AUTOIDLE is set, AUTOIDLE will
be set to 0 upon enable.  Upon module disable, AUTOIDLE will be set to
1.

Enabling module autoidle should save some power.  The only reason to
not set the OCP_SYSCONFIG.AUTOIDLE bit is if there is a bug in the
module RTL, e.g., the MPUINTC block on OMAP3.

Comments from Kevin Hilman <khilman@deeprootsystems.com> inspired this patch,
and Kevin tested an earlier version of this patch.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-12-11 17:00:43 -07:00
Paul Walmsley
6f8b7ff5b0 OMAP clock/hwmod: fix off-by-one errors
Fix loop bailout off-by-one bugs reported by Juha Leppänen
<juha_motorsportcom@luukku.com>.

This second version incorporates comments from Russell King
<linux@arm.linux.org.uk>.  A new macro, 'omap_test_timeout', has
been created, with cleaner code, and existing code has been converted
to use it.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Juha Leppänen <juha_motorsportcom@luukku.com>
Cc: Russell King <linux@arm.linux.org.uk>
2009-12-11 17:00:43 -07:00
Thara Gopinath
3863c74b51 OMAP3: PM: Fix for MPU power domain MEM BANK position
MPU power domain bank 0 bits are displayed in position of bank 1
in PWRSTS and PREPWRSTS registers. So read them from correct
position

Signed-off-by: Thara Gopinath <thara@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11 17:00:42 -07:00
Paul Walmsley
155a22ecd5 OMAP powerdomain: rearrange struct powerdomain to save some memory
This patch rearranges the order of structure members in struct powerdomain
to avoid wasting memory due to alignment restrictions.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11 17:00:41 -07:00
Paul Walmsley
2354eb5a94 OMAP powerdomain/PM: use symbolic constants for the max number of power states
Replace some bare constants with power states.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
2009-12-11 17:00:41 -07:00
Paul Walmsley
33903eb55a OMAP clockdomain/powerdomain: remove CONFIG_OMAP_DEBUG_{CLOCK,POWER}DOMAIN
Avoid cluttering the Kconfig space with debug options that are rarely
used.  These can now be enabled and disabled by patching the "#undef DEBUG"
in the source files with "#define DEBUG", conforming to the practice for
the rest of the linux-omap code.

Also, while we're here, some lines in plat-omap/Kconfig use sets of
leading spaces when those lines should start with tabs.  Convert most
of them to use tabs.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>
2009-12-11 17:00:40 -07:00
Paul Walmsley
52650505fb OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c
The OMAP1 clock code currently #includes a large .h file full of static
data structures.  Instead, define the data in a .c file.

Russell King <linux@arm.linux.org.uk> proposed this new arrangement:

    http://marc.info/?l=linux-omap&m=125967425908895&w=2

This patch also deals with most of the flagrant checkpatch violations.

While here, separate the mpu_rate data structures out into their own
files, opp.h and opp_data.c.  In the long run, these mpu_rate tables
should be replaced with OPP code.

Also includes a patch from Felipe Balbi <felipe.balbi@nokia.com> to
mark omap1_clk_functions as __initdata to avoid a section warning:

    http://patchwork.kernel.org/patch/64366/

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Cc: Nishanth Menon <nm@ti.com>
2009-12-11 17:00:40 -07:00
Paul Walmsley
d8a944582d OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx*
The OMAP2 clock code currently #includes a large .h file full of static
data structures.  Instead, define the data in a .c file.

Russell King <linux@arm.linux.org.uk> proposed this new arrangement:

    http://marc.info/?l=linux-omap&m=125967425908895&w=2

This patch also deals with most of the flagrant checkpatch violations.

While here, separate the prcm_config data structures out into their own
files, opp2xxx.h and opp24{2,3}0_data.c, and only build in the OPP tables
for the target device.  This should save some memory.  In the long run,
these prcm_config tables should be replaced with OPP code.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Nishanth Menon <nm@ti.com>
2009-12-11 16:16:00 -07:00
Paul Walmsley
82e9bd5885 OMAP3 clock: convert clock34xx.h to clock34xx_data.c
The OMAP3 clock code currently #includes a large .h file full of static
data structures.  Instead, define the data in a .c file.

Russell King <linux@arm.linux.org.uk> proposed this new arrangement:

    http://marc.info/?l=linux-omap&m=125967425908895&w=2

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Russell King <linux@arm.linux.org.uk>
2009-12-11 16:12:15 -07:00
Linus Torvalds
aa2cf42059 Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linux
* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux:
  MAINTAINERS: Add OMAP2/3 DSS and OMAPFB maintainer
  OMAP: SDP: Enable DSS2 for OMAP3 SDP board
  OMAP: DSS2: Taal DSI command mode panel driver
  OMAP: DSS2: Add generic and Sharp panel drivers
  OMAP: DSS2: omapfb driver
  OMAP: DSS2: DSI driver
  OMAP: DSS2: SDI driver
  OMAP: DSS2: RFBI driver
  OMAP: DSS2: Video encoder driver
  OMAP: DSS2: DPI driver
  OMAP: DSS2: DISPC
  OMAP: DSS2: Add more core files
  OMAP: DSS2: Display Subsystem Driver core
  OMAP: DSS2: Documentation for DSS2
  OMAP: Add support for VRFB rotation engine
  OMAP: Add VRAM manager
  OMAP: OMAPFB: add omapdss device
  OMAP: OMAPFB: split omapfb.h
  OMAP2: Add funcs for writing SMS_ROT_* registers
2009-12-10 21:55:17 -08:00
Linus Torvalds
4ef58d4e2a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits)
  tree-wide: fix misspelling of "definition" in comments
  reiserfs: fix misspelling of "journaled"
  doc: Fix a typo in slub.txt.
  inotify: remove superfluous return code check
  hdlc: spelling fix in find_pvc() comment
  doc: fix regulator docs cut-and-pasteism
  mtd: Fix comment in Kconfig
  doc: Fix IRQ chip docs
  tree-wide: fix assorted typos all over the place
  drivers/ata/libata-sff.c: comment spelling fixes
  fix typos/grammos in Documentation/edac.txt
  sysctl: add missing comments
  fs/debugfs/inode.c: fix comment typos
  sgivwfb: Make use of ARRAY_SIZE.
  sky2: fix sky2_link_down copy/paste comment error
  tree-wide: fix typos "couter" -> "counter"
  tree-wide: fix typos "offest" -> "offset"
  fix kerneldoc for set_irq_msi()
  spidev: fix double "of of" in comment
  comment typo fix: sybsystem -> subsystem
  ...
2009-12-09 19:43:33 -08:00