Commit graph

106 commits

Author SHA1 Message Date
Alexey Dobriyan
405f55712d headers: smp_lock.h redux
* Remove smp_lock.h from files which don't need it (including some headers!)
* Add smp_lock.h to files which do need it
* Make smp_lock.h include conditional in hardirq.h
  It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT

  This will make hardirq.h inclusion cheaper for every PREEMPT=n config
  (which includes allmodconfig/allyesconfig, BTW)

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-12 12:22:34 -07:00
Oleg Nesterov
793285fcaf cred_guard_mutex: do not return -EINTR to user-space
do_execve() and ptrace_attach() return -EINTR if
mutex_lock_interruptible(->cred_guard_mutex) fails.

This is not right, change the code to return ERESTARTNOINTR.

Perhaps we should also change proc_pid_attr_write().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-06 13:57:04 -07:00
Nikanth Karthikesan
ff677f8d10 trivial: fix comment typo in fs/compat.c
Fix a typo in fs/compat.c

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 18:01:44 +02:00
Al Viro
6fac98dd21 Push BKL into do_mount()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:08 -04:00
David Howells
5e751e992f CRED: Rename cred_exec_mutex to reflect that it's a guard against ptrace
Rename cred_exec_mutex to reflect that it's a guard against foreign
intervention on a process's credential state, such as is made by ptrace().  The
attachment of a debugger to a process affects execve()'s calculation of the new
credential state - _and_ also setprocattr()'s calculation of that state.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-05-11 08:15:36 +10:00
Oleg Nesterov
8c652f96d3 do_execve() must not clear fs->in_exec if it was set by another thread
If do_execve() fails after check_unsafe_exec(), it clears fs->in_exec
unconditionally. This is wrong if we race with our sub-thread which
also does do_execve:

	Two threads T1 and T2 and another process P, all share the same
	->fs.

	T1 starts do_execve(BAD_FILE). It calls check_unsafe_exec(), since
	->fs is shared, we set LSM_UNSAFE but not ->in_exec.

	P exits and decrements fs->users.

	T2 starts do_execve(), calls check_unsafe_exec(), now ->fs is not
	shared, we set fs->in_exec.

	T1 continues, open_exec(BAD_FILE) fails, we clear ->in_exec and
	return to the user-space.

	T1 does clone(CLONE_FS /* without CLONE_THREAD */).

	T2 continues without LSM_UNSAFE_SHARE while ->fs is shared with
	another process.

Change check_unsafe_exec() to return res = 1 if we set ->in_exec, and change
do_execve() to clear ->in_exec depending on res.

When do_execve() suceeds, it is safe to clear ->in_exec unconditionally.
It can be set only if we don't share ->fs with another process, and since
we already killed all sub-threads either ->in_exec == 0 or we are the
only user of this ->fs.

Also, we do not need fs->lock to clear fs->in_exec.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-24 07:39:45 -07:00
Christoph Hellwig
2eae7a1874 kill vfs_stat_fd / vfs_lstat_fd
There's really no reason to keep vfs_stat_fd and vfs_lstat_fd with
Oleg's vfs_fstatat.  Use vfs_fstatat for the few cases having the
directory fd, and switch all others to vfs_stat / vfs_lstat.

Reviewed-by: Christoph Hellwig <hch@lst.de>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-04-20 23:02:52 -04:00
Oleg Drokin
0112fc2229 Separate out common fstatat code into vfs_fstatat
This is a version incorporating Christoph's suggestion.

Separate out common *fstatat functionality into a single function
instead of duplicating it all over the code.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-04-20 23:02:51 -04:00
Linus Torvalds
601cc11d05 Make non-compat preadv/pwritev use native register size
Instead of always splitting the file offset into 32-bit 'high' and 'low'
parts, just split them into the largest natural word-size - which in C
terms is 'unsigned long'.

This allows 64-bit architectures to avoid the unnecessary 32-bit
shifting and masking for native format (while the compat interfaces will
obviously always have to do it).

This also changes the order of 'high' and 'low' to be "low first".  Why?
Because when we have it like this, the 64-bit system calls now don't use
the "pos_high" argument at all, and it makes more sense for the native
system call to simply match the user-mode prototype.

This results in a much more natural calling convention, and allows the
compiler to generate much more straightforward code.  On x86-64, we now
generate

        testq   %rcx, %rcx      # pos_l
        js      .L122   #,
        movq    %rcx, -48(%rbp) # pos_l, pos

from the C source

        loff_t pos = pos_from_hilo(pos_h, pos_l);
	...
        if (pos < 0)
                return -EINVAL;

and the 'pos_h' register isn't even touched.  It used to generate code
like

        mov     %r8d, %r8d      # pos_low, pos_low
        salq    $32, %rcx       #, tmp71
        movq    %r8, %rax       # pos_low, pos.386
        orq     %rcx, %rax      # tmp71, pos.386
        js      .L122   #,
        movq    %rax, -48(%rbp) # pos.386, pos

which isn't _that_ horrible, but it does show how the natural word size
is just a more sensible interface (same arguments will hold in the user
level glibc wrapper function, of course, so the kernel side is just half
of the equation!)

Note: in all cases the user code wrapper can again be the same. You can
just do

	#define HALF_BITS (sizeof(unsigned long)*4)
	__syscall(PWRITEV, fd, iov, count, offset, (offset >> HALF_BITS) >> HALF_BITS);

or something like that.  That way the user mode wrapper will also be
nicely passing in a zero (it won't actually have to do the shifts, the
compiler will understand what is going on) for the last argument.

And that is a good idea, even if nobody will necessarily ever care: if
we ever do move to a 128-bit lloff_t, this particular system call might
be left alone.  Of course, that will be the least of our worries if we
really ever need to care, so this may not be worth really caring about.

[ Fixed for lost 'loff_t' cast noticed by Andrew Morton ]

Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-api@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ralf Baechle <ralf@linux-mips.org>>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-04 14:20:34 -07:00
Linus Torvalds
8fe74cf053 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  Remove two unneeded exports and make two symbols static in fs/mpage.c
  Cleanup after commit 585d3bc06f
  Trim includes of fdtable.h
  Don't crap into descriptor table in binfmt_som
  Trim includes in binfmt_elf
  Don't mess with descriptor table in load_elf_binary()
  Get rid of indirect include of fs_struct.h
  New helper - current_umask()
  check_unsafe_exec() doesn't care about signal handlers sharing
  New locking/refcounting for fs_struct
  Take fs_struct handling to new file (fs/fs_struct.c)
  Get rid of bumping fs_struct refcount in pivot_root(2)
  Kill unsharing fs_struct in __set_personality()
2009-04-02 21:09:10 -07:00
Gerd Hoffmann
10c7db2792 preadv/pwritev: switch compat readv/preadv/writev/pwritev from fget to fget_light
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <linux-api@vger.kernel.org>
Cc: <linux-arch@vger.kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:05:08 -07:00
Gerd Hoffmann
f3554f4bc6 preadv/pwritev: Add preadv and pwritev system calls.
This patch adds preadv and pwritev system calls.  These syscalls are a
pretty straightforward combination of pread and readv (same for write).
They are quite useful for doing vectored I/O in threaded applications.
Using lseek+readv instead opens race windows you'll have to plug with
locking.

Other systems have such system calls too, for example NetBSD, check
here: http://www.daemon-systems.org/man/preadv.2.html

The application-visible interface provided by glibc should look like
this to be compatible to the existing implementations in the *BSD family:

  ssize_t preadv(int d, const struct iovec *iov, int iovcnt, off_t offset);
  ssize_t pwritev(int d, const struct iovec *iov, int iovcnt, off_t offset);

This prototype has one problem though: On 32bit archs is the (64bit)
offset argument unaligned, which the syscall ABI of several archs doesn't
allow to do.  At least s390 needs a wrapper in glibc to handle this.  As
we'll need a wrappers in glibc anyway I've decided to push problem to
glibc entriely and use a syscall prototype which works without
arch-specific wrappers inside the kernel: The offset argument is
explicitly splitted into two 32bit values.

The patch sports the actual system call implementation and the windup in
the x86 system call tables.  Other archs follow as separate patches.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <linux-api@vger.kernel.org>
Cc: <linux-arch@vger.kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:05:08 -07:00
Gerd Hoffmann
6949a6318e preadv/pwritev: create compat_writev()
Factor out some code from compat_sys_writev() which can be shared with the
upcoming compat_sys_pwritev().

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <linux-api@vger.kernel.org>
Cc: <linux-arch@vger.kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:05:07 -07:00
Gerd Hoffmann
dac1213842 preadv/pwritev: create compat_readv()
This patch series:

Implement the preadv() and pwritev() syscalls.  *BSD has this syscall for
quite some time.

Test code:

#if 0
set -x
gcc -Wall -O2 -o preadv $0
exit 0
#endif
/*
 * preadv demo / test
 *
 * (c) 2008 Gerd Hoffmann <kraxel@redhat.com>
 *
 * build with "sh $thisfile"
 */

#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <errno.h>
#include <inttypes.h>
#include <sys/uio.h>

/* ----------------------------------------------------------------- */
/* syscall windup                                                    */

#include <sys/syscall.h>
#if 0
/* WARNING: Be sure you know what you are doing if you enable this.
 * linux syscall code isn't upstream yet, syscall numbers are subject
 * to change */
# ifndef __NR_preadv
#  ifdef __i386__
#   define __NR_preadv  333
#   define __NR_pwritev 334
#  endif
#  ifdef __x86_64__
#   define __NR_preadv  295
#   define __NR_pwritev 296
#  endif
# endif
#endif
#ifndef __NR_preadv
# error preadv/pwritev syscall numbers are unknown
#endif

static ssize_t preadv(int fd, const struct iovec *iov, int iovcnt, off_t offset)
{
    uint32_t pos_high = (offset >> 32) & 0xffffffff;
    uint32_t pos_low  =  offset        & 0xffffffff;

    return syscall(__NR_preadv, fd, iov, iovcnt, pos_high, pos_low);
}

static ssize_t pwritev(int fd, const struct iovec *iov, int iovcnt, off_t offset)
{
    uint32_t pos_high = (offset >> 32) & 0xffffffff;
    uint32_t pos_low  =  offset        & 0xffffffff;

    return syscall(__NR_pwritev, fd, iov, iovcnt, pos_high, pos_low);
}

/* ----------------------------------------------------------------- */
/* demo/test app                                                     */

static char filename[] = "/tmp/preadv-XXXXXX";
static char outbuf[11] = "0123456789";
static char inbuf[11]  = "----------";

static struct iovec ovec[2] = {{
        .iov_base = outbuf + 5,
        .iov_len  = 5,
    },{
        .iov_base = outbuf + 0,
        .iov_len  = 5,
    }};

static struct iovec ivec[3] = {{
        .iov_base = inbuf + 6,
        .iov_len  = 2,
    },{
        .iov_base = inbuf + 4,
        .iov_len  = 2,
    },{
        .iov_base = inbuf + 2,
        .iov_len  = 2,
    }};

void cleanup(void)
{
    unlink(filename);
}

int main(int argc, char **argv)
{
    int fd, rc;

    fd = mkstemp(filename);
    if (-1 == fd) {
        perror("mkstemp");
        exit(1);
    }
    atexit(cleanup);

    /* write to file: "56789-01234" */
    rc = pwritev(fd, ovec, 2, 0);
    if (rc < 0) {
        perror("pwritev");
        exit(1);
    }

    /* read from file: "78-90-12" */
    rc = preadv(fd, ivec, 3, 2);
    if (rc < 0) {
        perror("preadv");
        exit(1);
    }

    printf("result  : %s\n", inbuf);
    printf("expected: %s\n", "--129078--");
    exit(0);
}

This patch:

Factor out some code from compat_sys_readv() which can be shared with the
upcoming compat_sys_preadv().

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <linux-api@vger.kernel.org>
Cc: <linux-arch@vger.kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:05:07 -07:00
Al Viro
498052bba5 New locking/refcounting for fs_struct
* all changes of current->fs are done under task_lock and write_lock of
  old fs->lock
* refcount is not atomic anymore (same protection)
* its decrements are done when removing reference from current; at the
  same time we decide whether to free it.
* put_fs_struct() is gone
* new field - ->in_exec.  Set by check_unsafe_exec() if we are trying to do
  execve() and only subthreads share fs_struct.  Cleared when finishing exec
  (success and failure alike).  Makes CLONE_FS fail with -EAGAIN if set.
* check_unsafe_exec() may fail with -EAGAIN if another execve() from subthread
  is in progress.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-03-31 23:00:26 -04:00
Hugh Dickins
e426b64c41 fix setuid sometimes doesn't
Joe Malicki reports that setuid sometimes doesn't: very rarely,
a setuid root program does not get root euid; and, by the way,
they have a health check running lsof every few minutes.

Right, check_unsafe_exec() notes whether the files_struct is being
shared by more threads than will get killed by the exec, and if so
sets LSM_UNSAFE_SHARE to make bprm_set_creds() careful about euid.
But /proc/<pid>/fd and /proc/<pid>/fdinfo lookups make transient
use of get_files_struct(), which also raises that sharing count.

There's a rather simple fix for this: exec's check on files->count
has been redundant ever since 2.6.1 made it unshare_files() (except
while compat_do_execve() omitted to do so) - just remove that check.

[Note to -stable: this patch will not apply before 2.6.29: earlier
releases should just remove the files->count line from unsafe_exec().]

Reported-by: Joe Malicki <jmalicki@metacarta.com>
Narrowed-down-by: Michael Itz <mitz@metacarta.com>
Tested-by: Joe Malicki <jmalicki@metacarta.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-28 17:30:00 -07:00
Hugh Dickins
53e9309e01 compat_do_execve should unshare_files
2.6.26's commit fd8328be87
"sanitize handling of shared descriptor tables in failing execve()"
moved the unshare_files() from flush_old_exec() and several binfmts
to the head of do_execve(); but forgot to make the same change to
compat_do_execve(), leaving a CLONE_FILES files_struct shared across
exec from a 32-bit process on a 64-bit kernel.

It's arguable whether the files_struct really ought to be unshared
across exec; but 2.6.1 made that so to stop the loading binary's fd
leaking into other threads, and a 32-bit process on a 64-bit kernel
ought to behave in the same way as 32 on 32 and 64 on 64.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-28 17:30:00 -07:00
Linus Torvalds
3ae5080f4c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (37 commits)
  fs: avoid I_NEW inodes
  Merge code for single and multiple-instance mounts
  Remove get_init_pts_sb()
  Move common mknod_ptmx() calls into caller
  Parse mount options just once and copy them to super block
  Unroll essentials of do_remount_sb() into devpts
  vfs: simple_set_mnt() should return void
  fs: move bdev code out of buffer.c
  constify dentry_operations: rest
  constify dentry_operations: configfs
  constify dentry_operations: sysfs
  constify dentry_operations: JFS
  constify dentry_operations: OCFS2
  constify dentry_operations: GFS2
  constify dentry_operations: FAT
  constify dentry_operations: FUSE
  constify dentry_operations: procfs
  constify dentry_operations: ecryptfs
  constify dentry_operations: CIFS
  constify dentry_operations: AFS
  ...
2009-03-27 16:23:12 -07:00
Christoph Hellwig
2b1c6bd77d generic compat_sys_ustat
Due to a different size of ino_t ustat needs a compat handler, but
currently only x86 and mips provide one.  Add a generic compat_sys_ustat
and switch all architectures over to it.  Instead of doing various
user copy hacks compat_sys_ustat just reimplements sys_ustat as
it's trivial.  This was suggested by Arnd Bergmann.

Found by Eric Sandeen when running xfstests/017 on ppc64, which causes
stack smashing warnings on RHEL/Fedora due to the too large amount of
data writen by the syscall.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-03-27 14:43:57 -04:00
James Morris
703a3cd728 Merge branch 'master' into next 2009-03-24 10:52:46 +11:00
Kentaro Takeda
f9ce1f1cda Add in_execve flag into task_struct.
This patch allows LSM modules to determine whether current process is in an
execve operation or not so that they can behave differently while an execve
operation is in progress.

This patch is needed by TOMOYO. Please see another patch titled "LSM adapter
functions." for backgrounds.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-02-12 15:15:03 +11:00
David Howells
0bf2f3aec5 CRED: Fix SUID exec regression
The patch:

	commit a6f76f23d2
	CRED: Make execve() take advantage of copy-on-write credentials

moved the place in which the 'safeness' of a SUID/SGID exec was performed to
before de_thread() was called.  This means that LSM_UNSAFE_SHARE is now
calculated incorrectly.  This flag is set if any of the usage counts for
fs_struct, files_struct and sighand_struct are greater than 1 at the time the
determination is made.  All of which are true for threads created by the
pthread library.

However, since we wish to make the security calculation before irrevocably
damaging the process so that we can return it an error code in the case where
we decide we want to reject the exec request on this basis, we have to make the
determination before calling de_thread().

So, instead, we count up the number of threads (CLONE_THREAD) that are sharing
our fs_struct (CLONE_FS), files_struct (CLONE_FILES) and sighand_structs
(CLONE_SIGHAND/CLONE_THREAD) with us.  These will be killed by de_thread() and
so can be discounted by check_unsafe_exec().

We do have to be careful because CLONE_THREAD does not imply FS or FILES.

We _assume_ that there will be no extra references to these structs held by the
threads we're going to kill.

This can be tested with the attached pair of programs.  Build the two programs
using the Makefile supplied, and run ./test1 as a non-root user.  If
successful, you should see something like:

	[dhowells@andromeda tmp]$ ./test1
	--TEST1--
	uid=4043, euid=4043 suid=4043
	exec ./test2
	--TEST2--
	uid=4043, euid=0 suid=0
	SUCCESS - Correct effective user ID

and if unsuccessful, something like:

	[dhowells@andromeda tmp]$ ./test1
	--TEST1--
	uid=4043, euid=4043 suid=4043
	exec ./test2
	--TEST2--
	uid=4043, euid=4043 suid=4043
	ERROR - Incorrect effective user ID!

The non-root user ID you see will depend on the user you run as.

[test1.c]
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <pthread.h>

static void *thread_func(void *arg)
{
	while (1) {}
}

int main(int argc, char **argv)
{
	pthread_t tid;
	uid_t uid, euid, suid;

	printf("--TEST1--\n");
	getresuid(&uid, &euid, &suid);
	printf("uid=%d, euid=%d suid=%d\n", uid, euid, suid);

	if (pthread_create(&tid, NULL, thread_func, NULL) < 0) {
		perror("pthread_create");
		exit(1);
	}

	printf("exec ./test2\n");
	execlp("./test2", "test2", NULL);
	perror("./test2");
	_exit(1);
}

[test2.c]
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>

int main(int argc, char **argv)
{
	uid_t uid, euid, suid;

	getresuid(&uid, &euid, &suid);
	printf("--TEST2--\n");
	printf("uid=%d, euid=%d suid=%d\n", uid, euid, suid);

	if (euid != 0) {
		fprintf(stderr, "ERROR - Incorrect effective user ID!\n");
		exit(1);
	}
	printf("SUCCESS - Correct effective user ID\n");
	exit(0);
}

[Makefile]
CFLAGS = -D_GNU_SOURCE -Wall -Werror -Wunused
all: test1 test2

test1: test1.c
	gcc $(CFLAGS) -o test1 test1.c -lpthread

test2: test2.c
	gcc $(CFLAGS) -o test2 test2.c
	sudo chown root.root test2
	sudo chmod +s test2

Reported-by: David Smith <dsmith@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: David Smith <dsmith@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-02-07 08:46:18 +11:00
Heiko Carstens
c9da9f2129 [CVE-2009-0029] Make sys_pselect7 static
Not a single architecture has wired up sys_pselect7 plus it is the
only system call with seven parameters. Just make it static and
rename it to do_pselect which will do the work for sys_pselect6.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 14:15:16 +01:00
Gerd Hoffmann
ca8a5bd282 add missing accounting calls to compat_sys_{readv,writev}
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jay Lan <jlan@engr.sgi.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:13 -08:00
David Howells
a6f76f23d2 CRED: Make execve() take advantage of copy-on-write credentials
Make execve() take advantage of copy-on-write credentials, allowing it to set
up the credentials in advance, and then commit the whole lot after the point
of no return.

This patch and the preceding patches have been tested with the LTP SELinux
testsuite.

This patch makes several logical sets of alteration:

 (1) execve().

     The credential bits from struct linux_binprm are, for the most part,
     replaced with a single credentials pointer (bprm->cred).  This means that
     all the creds can be calculated in advance and then applied at the point
     of no return with no possibility of failure.

     I would like to replace bprm->cap_effective with:

	cap_isclear(bprm->cap_effective)

     but this seems impossible due to special behaviour for processes of pid 1
     (they always retain their parent's capability masks where normally they'd
     be changed - see cap_bprm_set_creds()).

     The following sequence of events now happens:

     (a) At the start of do_execve, the current task's cred_exec_mutex is
     	 locked to prevent PTRACE_ATTACH from obsoleting the calculation of
     	 creds that we make.

     (a) prepare_exec_creds() is then called to make a copy of the current
     	 task's credentials and prepare it.  This copy is then assigned to
     	 bprm->cred.

  	 This renders security_bprm_alloc() and security_bprm_free()
     	 unnecessary, and so they've been removed.

     (b) The determination of unsafe execution is now performed immediately
     	 after (a) rather than later on in the code.  The result is stored in
     	 bprm->unsafe for future reference.

     (c) prepare_binprm() is called, possibly multiple times.

     	 (i) This applies the result of set[ug]id binaries to the new creds
     	     attached to bprm->cred.  Personality bit clearance is recorded,
     	     but now deferred on the basis that the exec procedure may yet
     	     fail.

         (ii) This then calls the new security_bprm_set_creds().  This should
	     calculate the new LSM and capability credentials into *bprm->cred.

	     This folds together security_bprm_set() and parts of
	     security_bprm_apply_creds() (these two have been removed).
	     Anything that might fail must be done at this point.

         (iii) bprm->cred_prepared is set to 1.

	     bprm->cred_prepared is 0 on the first pass of the security
	     calculations, and 1 on all subsequent passes.  This allows SELinux
	     in (ii) to base its calculations only on the initial script and
	     not on the interpreter.

     (d) flush_old_exec() is called to commit the task to execution.  This
     	 performs the following steps with regard to credentials:

	 (i) Clear pdeath_signal and set dumpable on certain circumstances that
	     may not be covered by commit_creds().

         (ii) Clear any bits in current->personality that were deferred from
             (c.i).

     (e) install_exec_creds() [compute_creds() as was] is called to install the
     	 new credentials.  This performs the following steps with regard to
     	 credentials:

         (i) Calls security_bprm_committing_creds() to apply any security
             requirements, such as flushing unauthorised files in SELinux, that
             must be done before the credentials are changed.

	     This is made up of bits of security_bprm_apply_creds() and
	     security_bprm_post_apply_creds(), both of which have been removed.
	     This function is not allowed to fail; anything that might fail
	     must have been done in (c.ii).

         (ii) Calls commit_creds() to apply the new credentials in a single
             assignment (more or less).  Possibly pdeath_signal and dumpable
             should be part of struct creds.

	 (iii) Unlocks the task's cred_replace_mutex, thus allowing
	     PTRACE_ATTACH to take place.

         (iv) Clears The bprm->cred pointer as the credentials it was holding
             are now immutable.

         (v) Calls security_bprm_committed_creds() to apply any security
             alterations that must be done after the creds have been changed.
             SELinux uses this to flush signals and signal handlers.

     (f) If an error occurs before (d.i), bprm_free() will call abort_creds()
     	 to destroy the proposed new credentials and will then unlock
     	 cred_replace_mutex.  No changes to the credentials will have been
     	 made.

 (2) LSM interface.

     A number of functions have been changed, added or removed:

     (*) security_bprm_alloc(), ->bprm_alloc_security()
     (*) security_bprm_free(), ->bprm_free_security()

     	 Removed in favour of preparing new credentials and modifying those.

     (*) security_bprm_apply_creds(), ->bprm_apply_creds()
     (*) security_bprm_post_apply_creds(), ->bprm_post_apply_creds()

     	 Removed; split between security_bprm_set_creds(),
     	 security_bprm_committing_creds() and security_bprm_committed_creds().

     (*) security_bprm_set(), ->bprm_set_security()

     	 Removed; folded into security_bprm_set_creds().

     (*) security_bprm_set_creds(), ->bprm_set_creds()

     	 New.  The new credentials in bprm->creds should be checked and set up
     	 as appropriate.  bprm->cred_prepared is 0 on the first call, 1 on the
     	 second and subsequent calls.

     (*) security_bprm_committing_creds(), ->bprm_committing_creds()
     (*) security_bprm_committed_creds(), ->bprm_committed_creds()

     	 New.  Apply the security effects of the new credentials.  This
     	 includes closing unauthorised files in SELinux.  This function may not
     	 fail.  When the former is called, the creds haven't yet been applied
     	 to the process; when the latter is called, they have.

 	 The former may access bprm->cred, the latter may not.

 (3) SELinux.

     SELinux has a number of changes, in addition to those to support the LSM
     interface changes mentioned above:

     (a) The bprm_security_struct struct has been removed in favour of using
     	 the credentials-under-construction approach.

     (c) flush_unauthorized_files() now takes a cred pointer and passes it on
     	 to inode_has_perm(), file_has_perm() and dentry_open().

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:24 +11:00
Arjan van de Ven
4d36a9e65d select: deal with math overflow from borderline valid userland data
Some userland apps seem to pass in a "0" for the seconds, and several
seconds worth of usecs to select().  The old kernels accepted this just
fine, so the new kernels must too.

However, due to the upscaling of the microseconds to nanoseconds we had
some cases where we got math overflow, and depending on the GCC version
(due to inlining decisions) that actually resulted in an -EINVAL return.

This patch fixes this by adding the excess microseconds to the seconds
field.

Also with thanks to Marcin Slusarz for spotting some implementation bugs
in the diagnostics patches.

Reported-by: Carlos R. Mafra <crmafra2@gmail.com>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-26 11:22:08 -07:00
Linus Torvalds
1f6d6e8ebe Merge branch 'v28-range-hrtimers-for-linus-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'v28-range-hrtimers-for-linus-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (37 commits)
  hrtimers: add missing docbook comments to struct hrtimer
  hrtimers: simplify hrtimer_peek_ahead_timers()
  hrtimers: fix docbook comments
  DECLARE_PER_CPU needs linux/percpu.h
  hrtimers: fix typo
  rangetimers: fix the bug reported by Ingo for real
  rangetimer: fix BUG_ON reported by Ingo
  rangetimer: fix x86 build failure for the !HRTIMERS case
  select: fix alpha OSF wrapper
  select: fix alpha OSF wrapper
  hrtimer: peek at the timer queue just before going idle
  hrtimer: make the futex() system call use the per process slack value
  hrtimer: make the nanosleep() syscall use the per process slack
  hrtimer: fix signed/unsigned bug in slack estimator
  hrtimer: show the timer ranges in /proc/timer_list
  hrtimer: incorporate feedback from Peter Zijlstra
  hrtimer: add a hrtimer_start_range() function
  hrtimer: another build fix
  hrtimer: fix build bug found by Ingo
  hrtimer: make select() and poll() use the hrtimer range feature
  ...
2008-10-23 10:53:02 -07:00
Al Viro
53c9c5c0e3 [PATCH] prepare vfs_readdir() callers to returning filldir result
It's not the final state, but it allows moving ->readdir() instances
to passing filldir return value to caller of vfs_readdir().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-23 05:13:10 -04:00
Arjan van de Ven
651dab4264 Merge commit 'linus/master' into merge-linus
Conflicts:

	arch/x86/kvm/i8254.c
2008-10-17 09:20:26 -07:00
Christoph Hellwig
f7a5000f7a compat: move cp_compat_stat to common code
struct stat / compat_stat is the same on all architectures, so
cp_compat_stat should be, too.

Turns out it is, except that various architectures have slightly and some
high2lowuid/high2lowgid or the direct assignment instead of the
SET_UID/SET_GID that expands to the correct one anyway.

This patch replaces the arch-specific cp_compat_stat implementations with
a common one based on the x86-64 one.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David S. Miller <davem@davemloft.net> [ sparc bits ]
Acked-by: Kyle McMartin <kyle@mcmartin.ca> [ parisc bits ]
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 11:21:33 -07:00
Jason Baron
362e6663ef exec.c, compat.c: fix count(), compat_count() bounds checking
With MAX_ARG_STRINGS set to 0x7FFFFFFF, and being passed to 'count()' and
compat_count(), it would appear that the current max bounds check of
fs/exec.c:394:

	if(++i > max)
		return -E2BIG;

would never trigger. Since 'i' is of type int, so values would wrap and the
function would continue looping.

Simple fix seems to be chaning ++i to i++ and checking for '>='.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: "Ollie Wild" <aaw@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 11:21:32 -07:00
Arjan van de Ven
8ff3e8e85f select: switch select() and poll() over to hrtimers
With lots of help, input and cleanups from Thomas Gleixner

This patch switches select() and poll() over to hrtimers.

The core of the patch is replacing the "s64 timeout" with a
"struct timespec end_time" in all the plumbing.

But most of the diffstat comes from using the just introduced helpers:
	poll_select_set_timeout
	poll_select_copy_remaining
	timespec_add_safe
which make manipulating the timespec easier and less error-prone.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-09-05 21:35:03 -07:00
Thomas Gleixner
b773ad40ac select: add poll_select_set_timeout() and poll_select_copy_remaining() helpers
This patch adds 2 helpers that will be used for the hrtimer based select/poll:

poll_select_set_timeout() is a helper that takes a timeout (as a second, nanosecond
pair) and turns that into a "struct timespec" that represents the absolute end time.
This is a common operation in the many select() and poll() variants and needs various,
common, sanity checks.

poll_select_copy_remaining() is a helper that takes care of copying the remaining
time to userspace, as select(), pselect() and ppoll() do. This function comes in
both a natural and a compat implementation (due to datastructure differences).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2008-09-05 21:34:59 -07:00
Al Viro
8f3f655da7 [PATCH] fix regular readdir() and friends
Handling of -EOVERFLOW.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-08-25 01:18:08 -04:00
Al Viro
2d8f30380a [PATCH] sanitize __user_walk_fd() et.al.
* do not pass nameidata; struct path is all the callers want.
* switch to new helpers:
	user_path_at(dfd, pathname, flags, &path)
	user_path(pathname, &path)
	user_lpath(pathname, &path)
	user_path_dir(pathname, &path)  (fail if not a directory)
  The last 3 are trivial macro wrappers for the first one.
* remove nameidata in callers.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-07-26 20:53:34 -04:00
Ulrich Drepper
9deb27baed flag parameters: signalfd
This patch adds the new signalfd4 syscall.  It extends the old signalfd
syscall by one parameter which is meant to hold a flag value.  In this
patch the only flag support is SFD_CLOEXEC which causes the close-on-exec
flag for the returned file descriptor to be set.

A new name SFD_CLOEXEC is introduced which in this implementation must
have the same value as O_CLOEXEC.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <signal.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_signalfd4
# ifdef __x86_64__
#  define __NR_signalfd4 289
# elif defined __i386__
#  define __NR_signalfd4 327
# else
#  error "need __NR_signalfd4"
# endif
#endif

#define SFD_CLOEXEC O_CLOEXEC

int
main (void)
{
  sigset_t ss;
  sigemptyset (&ss);
  sigaddset (&ss, SIGUSR1);
  int fd = syscall (__NR_signalfd4, -1, &ss, 8, 0);
  if (fd == -1)
    {
      puts ("signalfd4(0) failed");
      return 1;
    }
  int coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (coe & FD_CLOEXEC)
    {
      puts ("signalfd4(0) set close-on-exec flag");
      return 1;
    }
  close (fd);

  fd = syscall (__NR_signalfd4, -1, &ss, 8, SFD_CLOEXEC);
  if (fd == -1)
    {
      puts ("signalfd4(SFD_CLOEXEC) failed");
      return 1;
    }
  coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("signalfd4(SFD_CLOEXEC) does not set close-on-exec flag");
      return 1;
    }
  close (fd);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[akpm@linux-foundation.org: add sys_ni stub]
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:27 -07:00
Jon Tollefson
f4a67cceee fs: check for statfs overflow
Adds a check for an overflow in the filesystem size so if someone is
checking with statfs() on a 16G blocksize hugetlbfs in a 32bit binary that
it will report back EOVERFLOW instead of a size of 0.

Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Jon Tollefson <kniht@linux.vnet.ibm.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:19 -07:00
Al Viro
08a6fac1c6 [PATCH] get rid of leak in compat_execve()
Even though copy_compat_strings() doesn't cache the pages,
copy_strings_kernel() and stuff indirectly called by e.g.
->load_binary() is doing that, so we need to drop the
cache contents in the end.

[found by WANG Cong <wangcong@zeuux.org>]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-05-16 17:23:05 -04:00
Al Viro
9f3acc3140 [PATCH] split linux/file.h
Initial splitoff of the low-level stuff; taken to fdtable.h

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-05-01 13:08:16 -04:00
Roland McGrath
f3de272b82 signals: use HAVE_SET_RESTORE_SIGMASK
Change all the #ifdef TIF_RESTORE_SIGMASK conditionals in non-arch code to
#ifdef HAVE_SET_RESTORE_SIGMASK.  If arch code defines it first, the generic
set_restore_sigmask() using TIF_RESTORE_SIGMASK is not defined.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:37 -07:00
Roland McGrath
4e4c22c711 signals: add set_restore_sigmask
This adds the set_restore_sigmask() inline in <linux/thread_info.h> and
replaces every set_thread_flag(TIF_RESTORE_SIGMASK) with a call to it.  No
change, but abstracts the details of the flag protocol from all the calls.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:37 -07:00
Trond Myklebust
52833e897f Merge branch 'linus_origin' into hotfixes 2008-02-15 13:36:30 -05:00
Jan Blunck
1d957f9bf8 Introduce path_put()
* Add path_put() functions for releasing a reference to the dentry and
  vfsmount of a struct path in the right order

* Switch from path_release(nd) to path_put(&nd->path)

* Rename dput_path() to path_put_conditional()

[akpm@linux-foundation.org: fix cifs]
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: <linux-fsdevel@vger.kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Steven French <sfrench@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14 21:13:33 -08:00
Jan Blunck
4ac9137858 Embed a struct path into struct nameidata instead of nd->{dentry,mnt}
This is the central patch of a cleanup series. In most cases there is no good
reason why someone would want to use a dentry for itself. This series reflects
that fact and embeds a struct path into nameidata.

Together with the other patches of this series
- it enforced the correct order of getting/releasing the reference count on
  <dentry,vfsmount> pairs
- it prepares the VFS for stacking support since it is essential to have a
  struct path in every place where the stack can be traversed
- it reduces the overall code size:

without patch series:
   text    data     bss     dec     hex filename
5321639  858418  715768 6895825  6938d1 vmlinux

with patch series:
   text    data     bss     dec     hex filename
5320026  858418  715768 6894212  693284 vmlinux

This patch:

Switch from nd->{dentry,mnt} to nd->path.{dentry,mnt} everywhere.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix cifs]
[akpm@linux-foundation.org: fix smack]
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14 21:13:33 -08:00
Chuck Lever
4267c9561d NFS: Allow text-based mounts via compat_sys_mount
The compat_sys_mount() system call throws EINVAL for text-based NFSv4
mounts.

The text-based mount interface assumes that any mount option blob that
doesn't set the version field to "1" is a C string (ie not a legacy
mount request).  The compat_sys_mount() call treats blobs that don't
set the version field to "1" as an error.  We just relax the check in
compat_sys_mount() a bit to allow C strings to be passed down to the NFSv4
client.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-02-13 23:24:05 -05:00
Jiri Olsa
0321155926 fs: remove dead config CONFIG_HAS_COMPAT_EPOLL_EVENT symbol
Remove dead config CONFIG_HAS_COMPAT_EPOLL_EVENT symbol.

Signed-off-by: Jiri Olsa <olsajiri@gmail.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:03 -08:00
Davide Libenzi
4d672e7ac7 timerfd: new timerfd API
This is the new timerfd API as it is implemented by the following patch:

int timerfd_create(int clockid, int flags);
int timerfd_settime(int ufd, int flags,
		    const struct itimerspec *utmr,
		    struct itimerspec *otmr);
int timerfd_gettime(int ufd, struct itimerspec *otmr);

The timerfd_create() API creates an un-programmed timerfd fd.  The "clockid"
parameter can be either CLOCK_MONOTONIC or CLOCK_REALTIME.

The timerfd_settime() API give new settings by the timerfd fd, by optionally
retrieving the previous expiration time (in case the "otmr" parameter is not
NULL).

The time value specified in "utmr" is absolute, if the TFD_TIMER_ABSTIME bit
is set in the "flags" parameter.  Otherwise it's a relative time.

The timerfd_gettime() API returns the next expiration time of the timer, or
{0, 0} if the timerfd has not been set yet.

Like the previous timerfd API implementation, read(2) and poll(2) are
supported (with the same interface).  Here's a simple test program I used to
exercise the new timerfd APIs:

http://www.xmailserver.org/timerfd-test2.c

[akpm@linux-foundation.org: coding-style cleanups]
[akpm@linux-foundation.org: fix ia64 build]
[akpm@linux-foundation.org: fix m68k build]
[akpm@linux-foundation.org: fix mips build]
[akpm@linux-foundation.org: fix alpha, arm, blackfin, cris, m68k, s390, sparc and sparc64 builds]
[heiko.carstens@de.ibm.com: fix s390]
[akpm@linux-foundation.org: fix powerpc build]
[akpm@linux-foundation.org: fix sparc64 more]
Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:07 -08:00
James Morris
c43e259cc7 security: call security_file_permission from rw_verify_area
All instances of rw_verify_area() are followed by a call to
security_file_permission(), so just call the latter from the former.

Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-01-25 11:29:52 +11:00
Ollie Wild
b6a2fea393 mm: variable length argument support
Remove the arg+env limit of MAX_ARG_PAGES by copying the strings directly from
the old mm into the new mm.

We create the new mm before the binfmt code runs, and place the new stack at
the very top of the address space.  Once the binfmt code runs and figures out
where the stack should be, we move it downwards.

It is a bit peculiar in that we have one task with two mm's, one of which is
inactive.

[a.p.zijlstra@chello.nl: limit stack size]
Signed-off-by: Ollie Wild <aaw@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <linux-arch@vger.kernel.org>
Cc: Hugh Dickins <hugh@veritas.com>
[bunk@stusta.de: unexport bprm_mm_init]
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:45 -07:00
Badari Pulavarty
6087b2dab2 optimize compat_core_sys_select() by a using stack space for small fd sets
Optimize select by a using stack space for small fd sets.
core_sys_select() already has this optimization.  This is for compat
version.

Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-23 20:14:12 -07:00