Commit graph

25 commits

Author SHA1 Message Date
David Woodhouse
b2c57eee66 libertas: allow for PS mode to be disabled when firmware doesn't support it
Otherwise, we go into an endless busy loop trying to enable PS mode when
the command queue is empty, dealing with the error response, and then
trying to enable PS mode again because the command queue is empty.... it
doesn't really save much power.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:42 -08:00
David Woodhouse
b47ef2438d libertas: handle HOST_AWAKE event by sending WAKEUP_CONFIRM command
lbs_send_confirmwake() is a bit ugly but matches the way we confirm
sleep. We'll deal with that whole thing later.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:42 -08:00
David Woodhouse
c6ad3738c6 libertas: add SLEEP_PERIOD and FW_WAKE_METHOD command definitions
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:39 -08:00
David Woodhouse
6ce4fd2a3a libertas: add lbs_host_sleep_cfg() command function
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:01 -08:00
David Woodhouse
387a1f046f libertas: whitespace cleanup in host.h
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:55 -08:00
David Woodhouse
23a397ac82 libertas: add lbs_mesh sysfs attribute for enabling mesh
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:53 -08:00
Dan Williams
79a9a37c1e libertas: fix case of FWT_ACCESS_LIST_ROUTE and FWT_ACCESS_LIST_NEIGHBOR commands
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:48 -08:00
David Woodhouse
c9cd6f9d63 libertas: wait for 'firmware ready' event from firmware after loading
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:44 -08:00
Holger Schurig
0b3c07ff64 libertas: less eventcause shifts
* only shift eventcause once

* convert mac events to decimal, as this is what the firmware
  manual uses in section 6.1, too

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:04:58 -08:00
Holger Schurig
3a18864917 libertas: rework event subscription
This patch moves re-works the implementation of event subscription
via debugfs. For this:

* it tells cmd.c and cmdresp.c about CMD_802_11_SUBSCRIBE_EVENT
* removes lots of low-level cmd stuff from debugfs.c
* create unified functions to read/write snr, rssi, bcnmiss and
  failcount
* introduces #define's for subscription event bitmask values
* add a function to search for a specific element in an IE
  (a.k.a. TLV)
* add a function to find out the size of the TLV. This is needed
  because lbs_prepare_and_send_command() has an argument for a
  data buffer, but not for it's lengths and TLVs can be, by
  definition, vary in size.
* fix a bug where it was not possible to disable an event

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:04:55 -08:00
Brajesh Dave
96287ac4f7 libertas: configurable beacon interval
Requires firmware version 5.110.19.p0 or newer, available here:
http://dev.laptop.org/pub/firmware/libertas/

Signed-off-by: Ashish Shukla <ashishs@marvell.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:04:53 -08:00
Holger Schurig
1007832103 libertas: move to uniform lbs_/LBS_ namespace
This patch unifies the namespace of variables, functions defines
and structures. It does:

- rename libertas_XXX to lbs_XXX
- rename LIBERTAS_XXX to lbs_XXX
- rename wlan_XXX to lbs_XXX
- rename WLAN_XXX to LBS_XXX (but only those that were
  defined in libertas-local *.h files, e.g. not defines
  from net/ieee80211.h)

While passing, I fixed some checkpatch.pl errors too.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:04:46 -08:00
Holger Schurig
6470a89de9 [PATCH] libertas: fix u8 constant
Don't write constants that are (per documentation and struct) u8
as 0x0001, use 0x01 instead. Also remove an useless cast.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-By: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:19 -07:00
Luis Carlos Cobo
63f0023bc3 [PATCH] libertas: pass boot2 version to firmware
Boot2 version used to be hardcoded in the uploaded firmware,
this patch preserves the boot2 version before uploading firmware
and sends it to the firmware again on resume.

Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:15 -07:00
Luis Carlos Cobo
965f8bbc6c [PATCH] libertas: monitor mode support for OLPC firmware
Driver support for the monitor mode support that will be available in the next
OLPC 'bleeding edge' Marvell firmware release (most likely, 5.110.16.p2).

To activate monitor mode,

echo mode > /sys/class/net/{ethX,mshX}/device/libertas_rtap

where mode is the hex mask that specifies which frames to sniff (in short, 0x1
for data, 0x2 for all management but beacons, 0x4 for beacons). Any non zero
mode will activate the monitor mode, inhibiting transmission in ethX and mshX
interfaces and routing all the incoming traffic to a new rtapX interface that
will output the packets in 802.11+radiotap headers format.

Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:13 -07:00
Holger Schurig
6b63cd0f42 [PATCH] libertas: remove a hundred CMD_RET_xxx definitions
types.h contains the same amount of CMD_RET_xxx and CMD_xxx definitions.
They contains the same info: the firmware command opcode and, when the
firmware sends back a result, the command opcode ORed with 0x8000.

Having the same data twice in the source code is redundant and can lead to
errors (e.g. if you update or delete only one instance). This patch removed
all CMD_RET_xxx definitions and introduces a simple CMD_RET() macro.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:53 -07:00
Luis Carlos Cobo
a9f38d023b [PATCH] Support for mesh autostart deactivation through sysfs
echo 0 > /sys/class/net/mshX/autostart_enabled

This is supported from Marvell firmware version 5.110.16.p0 (to be released).

Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:52 -07:00
Dan Williams
ffcae953ac [PATCH] libertas: fix more mixed-case abuse
Mistakently introduced by a previous patch to upper-case all command
constants.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:46 -07:00
Dan Williams
276c015e1b [PATCH] libertas: new mesh control knobs
Support for new mesh control knobs on firmware 5.220.11.p4:

Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:45 -07:00
Dan Williams
0aef64d758 [PATCH] libertas: re-uppercase command defines and other constants
For readability.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:43 -07:00
Luis Carlos
82fde74b94 [PATCH] libertas: convert libertas_mpp into anycast_mask
With firmware 5.220.11.p5, this allows to specify the anycast addresses the
device will listen to.

The anycast address range is C0:27:C0:27:C0:XX where XX goes from 00 to 1F (or
0 to 31 in dec). The value to write on anycast_mask will specify which
addresses the device listens to. Bits in a 32 bit int are numbered from 0
(least significative bit) to 31. A specific address ending in YY will be
listened to if bit YY in the value is set to one.

Examples:

0x00000000 : do not listen to any anycast address
0xFFFFFFFF : listen to every anycast address from :00 to :1F
0x00000013 : listen to anycast addresses :00, :01 and :04

Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-12 14:07:54 -04:00
Luis Carlos Cobo Rus
7d8d28b31d [PATCH] libertas: support for mesh autostart on firmware 5.220.11
Signed-off-by: Luis Carlos Cobo Rus <luisca@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11 14:28:45 -04:00
Luis Carlos Cobo
90e8eafc93 [PATCH] libertas: updated mesh commands for 5.220.9.p11
Updated commands fwt_add and fwt_list, bt_list.
New commands: bt_get_invert, bt_set_invert, to invert the blinding table,
i.e., receive only frames from nodes listed in the BT.

This patch needs/is needed for firmware 5.220.9.p11.

Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11 14:28:41 -04:00
Luis Carlos Cobo Rus
7db283c914 [PATCH] libertas: version bump (321p0) and cmds update for new fw (5.220.10.p0)
This patch along with the previous commands update one, is necessary for
mesh and fwt ioctls to work properly with firmware version 5.220.10.p0
and later.

Signed-off-by: Luis Carlos Cobo Rus <luiscarlos@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11 14:28:41 -04:00
Marcelo Tosatti
876c9d3aeb [PATCH] Marvell Libertas 8388 802.11b/g USB driver
Add the Marvell Libertas 8388 802.11 USB driver.

Signed-off-by: Marcelo Tosatti <marcelo@kvack.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28 11:00:54 -04:00