Commit graph

1801 commits

Author SHA1 Message Date
Takashi Iwai
f511b01c8e ALSA: hda - Fix capture source widgets on ALC codecs
On some Realtek codecs like ALC882 or ALC883, the capture source is
no mux but sum widget.  We have to initialize all channels properly
for this type, otherwise noises may come in from the unused route.

The patch assures to mute unused routes, and unmute the currently
selected route.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Daniel J Blueman <daniel.blueman@gmail.com>
2008-08-17 09:53:34 +02:00
Clemens Ladisch
5430c72b14 ALSA: virtuoso: add Xonar D1 support
Add support for the Asus Xonar D1.  It is the same as the DX, but
without the external power detection.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-08-14 10:44:13 +02:00
Libin Yang
9e6dd47bf3 ALSA: hda - support new AMD HDMI Audio (1002:970f)
Signed-off-by: Libin Yang <libin.yang@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-08-12 15:33:44 +02:00
Seth Heasley
b29c2360f1 ALSA: hda_intel: ALSA HD Audio patch for Intel Ibex Peak DeviceIDs
This patch adds the Intel Ibex Peak (PCH) HD Audio Controller DeviceIDs.

Signed-off by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-08-12 12:30:43 +02:00
Nicolas Boichat
536319afd1 ALSA: Allow to force model to intel-mac-v3 in snd_hda_intel (sigmatel).
Currently, even if you pass model=intel-mac-v3 as a module parameter to
snd_hda_intel, the function patch_stac922x (patch_sigmatel.c) will still
try to auto-detect the model type. This is a problem on my MacBook Pro 1st
generation, which needs intel-mac-v3, but sometimes incorrectly reports
0x00000100 as subsystem id, which causes the switch in patch_stac922x to
select intel-mac-v4.

To fix this, I added a new model called intel-mac-auto, so in case no
module parameter is passed, and an Intel Mac board is detected, the
model will be automatically detected, while no detection will be done
if the model is forced to intel-mac-v3.

This problem has been around for quite a while, and I used to fix it
by moving the case statement for 0x00000100 in patch_stac922x so that
intel-mac-v3 is chosen.

Another way to fix the problem would be to check if a module parameter
was set directly in patch_stac922x, using something like this:
if (spec->board_config == STAC_INTEL_MAC_V3 &&
	!codec->bus->modelname) {

But I think it is less elegant (if you prefer that way, I can prepare a
patch).

Signed-off-by: Nicolas Boichat <nicolas@boichat.ch>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-27 10:22:27 +02:00
Travis Place
fe7e873f52 ALSA: hda - Add automatic model setting for the Acer Aspire 5920G laptop
Make the Acer Aspire 5920G (1025:0121) select ALC883_ACER_ASPIRE
by default.

Signed-off-by: Travis Place <wishie@wishie.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-27 10:22:26 +02:00
Adrian Bunk
13c2108de4 ALSA: make snd_ac97_add_vmaster() static
This patch makes the needlessly global snd_ac97_add_vmaster() static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-27 10:22:26 +02:00
Adrian Bunk
6aa1e46445 ALSA: sound/pci/azt3328.h: no variables for enums
AZF_FREQUENCIES and AZF_GAME_CONFIGS were variables, and this doesn't
seem to have been intended.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-27 10:22:25 +02:00
Kailang Yang
f53281e62a ALSA: hda - Add support of ASUS Eeepc P90*
- Support ASUS_P900A = P703
- Support ASUS_P901

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-18 12:39:09 +02:00
Alexander Holler
2522d73593 ALSA: hda - Added support for Asus V1Sn
Added the necessary ID for Asus V1Sn to patch_realtek.c
to use ALC861VD_LENOVO on these laptops.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-17 23:43:13 +02:00
Rene Herman
462dba28e1 ALSA: ALSA: ens1370: communicate PCI device to AC97
communicate the ES137x PCI device to the AC97 code for its
subsys_vendor/device values

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-17 14:29:55 +02:00
Rene Herman
810fd3f3f6 ALSA: ens1370: SRC stands for Sample Rate Converter
Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-17 11:58:38 +02:00
Takashi Iwai
e785d3d8fb ALSA: hda - Align BDL position adjustment parameter
It seems NVidia and other hardwares require the alignment for period
update timing.  For satisfying this condition, align the position
adjustment for delayed wake-up to the initial bdl_pos_adj value.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-16 12:03:24 +02:00
Rene Herman
f6127efba1 ALSA: add TriTech 28023 AC97 codec ID and Wolfson 9701 name.
Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-15 15:08:25 +02:00
David Woodhouse
751851af7a Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
Conflicts:

	sound/pci/Kconfig
2008-07-14 15:51:11 -07:00
Milton Miller
80ca9a706b ALSA: correct kcalloc usage
kcalloc is supposed to be called with the count as its first argument and the
element size as the second.

Both arguments are size_t so does not affect correctness.  This callsite is
during module_init and therefore not performance critical.  Another patch will
optimize the case when the count is variable but the size is fixed.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-14 09:01:09 +02:00
Takashi Iwai
9e4641541e ALSA: hda - Fix FSC V5505 model
model=laptop-hpmicsense matches better to FSC V5505 laptop.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-14 09:00:51 +02:00
Takashi Iwai
86376df6ad ALSA: hda - Fix missing init for unsol events on micsense model
Fixed the missing initialization for unsolicited events on
Cx5045 micsense model.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-14 09:00:37 +02:00
Takashi Iwai
4090dffb14 ALSA: hda - Fix internal mic vref pin setup
Set the vref80 to the internal mic pin 0x12 for Cx5045.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-14 09:00:33 +02:00
Matthew Ranostay
f7c5dda23a ALSA: hda: 92hd71bxx PC Beep
Added volume controls for the analog PC Beep on 92hd71bxx codecs.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-14 09:00:26 +02:00
David Woodhouse
18ee6dfae8 firmware: convert ymfpci driver to use firmware loader exclusively
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-07-10 14:47:48 +01:00
David Woodhouse
a292f404fa firmware: convert maestro3 driver to use firmware loader exclusively
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-07-10 14:47:46 +01:00
David Woodhouse
76770664dc firmware: convert korg1212 driver to use firmware loader exclusively
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-07-10 14:47:44 +01:00
David Howells
fd4f80de46 Fix a const pointer usage warning in the Digigram miXart soundcard driver
Fix a const pointer usage warning in the Digigram miXart soundcard driver.  A
const pointer is being passed to copy_from_user() to load the firmware into.
This is okay in this case because the function has allocated the firmware
struct itself, but the const qualifier is part of the firmware struct - so the
patch casts the const away.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-10 14:29:01 +01:00
David Howells
67852dc08c Fix a const pointer usage warning in the Digigram pcxhr soundcard driver
Fix a const pointer usage warning in the Digigram pcxhr compatible soundcard
driver.  A const pointer is being passed to copy_from_user() to load the
firmware into.  This is okay in this case because the function has allocated
the firmware struct itself, but the const qualifier is part of the firmware
struct - so the patch casts the const away.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-10 14:28:52 +01:00
David Woodhouse
b82a82d0a9 ymfpci: treat firmware data as const
Standardise both in-kernel and loaded firmware to be stored as
little-endian instead of host-endian.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-07-10 14:26:40 +01:00
David Woodhouse
fa6e1cb66e maestro3: treat firmware data as const
The maestro3 driver is byte-swapping its firmware to be host-endian in
advance, when it doesn't seem to be necessary -- we could just use
le16_to_cpu() as we load it.

Doing that means that we need to switch the in-tree firmware to be
little-endian too.

Take the least intrusive way of doing this, which is to switch the
existing snd_m3_convert_from_le() function to convert _to_ little-endian
instead, and use it on the in-tree firmware instead of the loaded
firmware. It's a bit suboptimal but doesn't matter much right now
because we're about to remove the special cases for the in-tree version
anyway.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-07-10 14:26:39 +01:00
David Woodhouse
b8d21807a1 pcxhr: treat firmware data as const
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-07-10 14:26:09 +01:00
David Woodhouse
93a9c901c8 riptide: treat firmware data as const
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-07-10 14:26:07 +01:00
David Woodhouse
c2ba47d776 vx222: treat firmware data as const
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-07-10 14:26:06 +01:00
Jaroslav Kysela
34ec8a0ae1 ALSA: HDA - HP dc7600 with pci sub IDs 0x103c/0x3011 belongs to hp-3013 model
As reported and tested by an RedHat customer, HP dc7600 with pci sub IDs
0x103c/0x3011 works with the hp-3013 model and not with the hp only model.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-10 14:49:19 +02:00
Matthew Ranostay
7e2574050e ALSA: hda - removed redundant gpio_mask
An gpio_mask value was defined twice needlessly.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-10 09:32:49 +02:00
Takashi Iwai
be321a890c ALSA: hda - Add support for Lenovo 3000 N200
Added the model entry (model=lenovo) for Lenovo N3000 N200 laptop
with ALC861-VD.  Reference below:
	https://bugzilla.novell.com/show_bug.cgi?id=406425

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-10 09:32:26 +02:00
Mike Rapoport
25552e87aa ALSA: ac97 - fix patch_ucb1400 for proper resume
Replace 'snd_ac97_write' with snd_ac97_write_cache' in pacth_ucb1400 to allow
proper codec wakeup.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-10 09:32:07 +02:00
Takashi Iwai
6a9dccd612 ALSA: ALSA: hda - Fix speaker output on Toshiba P105
Toshiba Satellite P105 with cx5045 has no HP pin but only a
speaker pin and does the speaker-muting on hardware.
Thus the matching model is laptop-micsense.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-10 09:32:03 +02:00
Takashi Iwai
470eaf6be7 ALSA: hda - Add missing Thinkpad Z60m support
Added the missing SSID of Thinkpad Z60m for model=thinkpad with
AD1981HD.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-10 09:31:58 +02:00
Takashi Iwai
0701e0640f ALSA: ALSA: hda - Fix ALC883 medion model
ALC883 medion model doesn't unmute the proper amps so no output can be heard.
Replaced the mute switches to behave just like other models.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-10 09:31:54 +02:00
Takashi Iwai
6cabf6b069 ALSA: Fix AC97 power down
Some laptops don't like PR3 powerdown.  Do PR3 powerdown only
for the real power-saving.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-10 09:31:34 +02:00
Walter Sheets
942fd1ebf6 ALSA: via82xx - Add VIA audio device #1841 to ac97_quirk list
Signed-off-by: Walter Sheets <w41ter@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-10 09:31:17 +02:00
Takashi Iwai
031005f78c ALSA: hda - disable amp override on non-HP machines
Some machines with Cx5045 seem to have no problem with the volume
over 0dB on NID 0x17.  Disable amp overrides for other devices but HP.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-27 08:51:21 +02:00
Takashi Iwai
4a3b698323 ALSA: ymfpci - fix initial volume for 44.1kHz output
YDSXGR_BUF441OUTVOL register isn't initialized properly.  This may lead to
a silent output at full volume of unchanged "Wave Playback Volume".
	http://bugzilla.kernel.org/show_bug.cgi?id=10963

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-27 08:51:10 +02:00
Takashi Iwai
c7e0757a46 ALSA: hda - Add MacBook 3.1 support
MacBook 3.1 is compatible with model=mbp3.
Added the codec SSID 10b6:3600.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-27 08:51:05 +02:00
Andreas Mohr
627d3e7abc ALSA: PCI168 snd-azt3328: some more fixups
- fix problem with codec register 0x6a being write-only
  by adding a software shadow register
  (caused annoying noise after module loading due to _toggling_
  between gameport and audio bits instead of configuring them properly)
- rename several "Wave" mixer controls to "PCM", since this is
  what Wine and several other apps are looking for (IOW, _requiring_)
  and this is what AC97 specs use as naming, too,
  thus I'd guess it's what these controls are
- cleanup, small optimizations

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-26 09:01:47 +02:00
Pierre Ossman
981bcead3f ALSA: trident - pause s/pdif output
Stop the S/PDIF DMA engine and output when the device is told to pause.
It will keep on looping the current buffer contents if this isn't done.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Tested-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-26 09:01:38 +02:00
Travis Place
1d11604eeb ALSA: hda - Added SSID for 'Fujitsu Siemens Amilo M1451G' laptop
Add the SSID for the "Fujitsu Siemens Amilo M1451G" laptop to
patch_realtek.c , so that it uses ALC880_FUJITSU by default.

Signed-off-by: Travis Place <wishie@wishie.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-26 09:01:26 +02:00
Travis Place
3e0e469fa2 ALSA: hda - Added model selection for iMac 24"
Added the SSID of a known iMac 24" to automatically use
ALC885_IMAC24 quirk.

Signed-off-by: Travis Place <wishie@wishie.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-26 09:01:18 +02:00
Takashi Iwai
44e051773d ALSA: aw2 - Fix Oops at initialization
The irq handler may be called before the proper initialization of hardware.
Call snd_aw2_saa7146_setup() before the irq handler registration.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-06-23 12:06:23 +02:00
Takashi Iwai
a1855d802f ALSA: hda - Fix digital converter proc output
AC_VERB_GET_DIGI_CONVERT_2 isn't actually implemented but reserved.
The whole SIC bits are returned from DIGI_CONVERT_1.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-20 14:16:01 +02:00
Takashi Iwai
f52845ad77 ALSA: ca0106 - Add entry for another MSI K8N Diamond MB
Added an entry for another MSI K8N Diamond mobo with SSID 1102:1009.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-18 09:31:59 +02:00
Takashi Iwai
43785eaeb1 ALSA: hda - Fix wrong volumes in AD1988 auto-probe mode
Don't create mixer volume elements for Headphone and Speaker if they
use the same DAC as normal line-outs on AD1988.  Otherwise the amp
value gets screwed up, e.g.
	https://bugzilla.novell.com/show_bug.cgi?id=398255

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-18 09:24:36 +02:00