Commit graph

279 commits

Author SHA1 Message Date
Jesper Nilsson
2c30da7175 CRIS v32: ETRAX FS Change name of LED macros in drivers/mach-fs/gpio.c to avoid collision. 2008-02-08 11:06:33 +01:00
Jesper Nilsson
cacc0cc83f CRIS v32: Change name of LED macros in drivers/mach-a3/gpio.c to avoid collision. 2008-02-08 11:06:33 +01:00
Jesper Nilsson
935a847b98 CRIS v32: Change include path for hwregs in drivers/iop_fw_load.c
Also, remove useless CVS id tag.
2008-02-08 11:06:33 +01:00
Jesper Nilsson
635c45c195 CRIS v32: Rewrite of stream co-processor driver for ETRAX FS and ARTPEC-3
- Workaround for cachebug (Guinness TR 106).
- Add ARTPEC-3 support.
2008-02-08 11:06:33 +01:00
Jesper Nilsson
a77dba6a4d CRIS v32: Replace build flags in boot/rescue/Makefile
- Change AFLAGS to asflags-y, LDFLAGS to ldflags-y and EXTRA_CFLAGS
  to ccflags-y. We only need the flags in this Makefile.
2008-02-08 11:06:33 +01:00
Jesper Nilsson
111e3b1aba CRIS v32: Replace build flags in boot/compressed/Makefile
- Change AFLAGS to asflags-y, LDFLAGS to ldflags-y and KBUILD_CFLAGS
  to ccflags-y. We only need the flags in this Makefile.
2008-02-08 11:06:33 +01:00
Jesper Nilsson
8f2972529f CRIS v10: Change name of low voltage read and set macros. 2008-02-08 11:06:33 +01:00
Jesper Nilsson
a9d13fad8c CRIS v32: Remove useless CVS id tag from boot/compressed/README 2008-02-08 11:06:33 +01:00
Jesper Nilsson
9bf79539ed CRIS v10: Remove duplicated folding of carry from lib/checksum.S, it is not needed.
Also, remove useless CVS id tag.
2008-02-08 11:06:32 +01:00
Jesper Nilsson
ab59284eae CRIS v10: Remove duplicated folding of carry from lib/checksumcopy.S, it is not needed.
Also, remove useless CVS id tag.
2008-02-08 11:06:32 +01:00
Jesper Nilsson
2afab729f5 CRIS v10: Clear TIF_SYSCALL_TRACE flag in ptrace_disable in kernel/ptrace.c 2008-02-08 11:06:32 +01:00
Jesper Nilsson
b1220e2e7f CRIS v10: Update kernel/io_interface_mux.c
Fixed a bug where two interfaces using pins in the same pin group could
not be allocated at the same time even if there where no pin collisions.

Change all restore and returns into goto exit pattern.

Also, remove useless CVS id and correct chapter reference for ETRAX100LX
Designer's Reference in comment.
2008-02-08 11:06:32 +01:00
Jesper Nilsson
5f526d1467 CRIS v10: Setup serial port 2 to avoid accidental TXD pulse on startup.
If serial port 2 is used, select it in R_GEN_CONFIG.
If serial port 2 is used, setup the control registers for the port.
This is done to avoid a pulse on the TXD line during start up,
which could disturb some units.

Also, remove useless CVS id and log.
2008-02-08 11:06:31 +01:00
Jesper Nilsson
c974a9e5a3 CRIS v10: Add synchronous serial port driver for CRIS v10. 2008-02-08 11:06:31 +01:00
Jesper Nilsson
4f073eff3f CRIS v10: Don't call get_mmu_context when switching between tasks with shared memory descriptors
Also, cleanup formatting and fix whitespace errors.
2008-02-08 11:06:31 +01:00
Jesper Nilsson
40316c1fad CRIS v10: Fix bug where error returns didn't restore irqs in mm/fault.c
Don't return when we're inside local_irq_disable(), use goto exit instead.
Also, cleanup some whitespace errors.
2008-02-08 11:06:31 +01:00
Jesper Nilsson
5712e4dfc6 CRIS v10: Remove useless CVS id tag from lib/old_checksum.c 2008-02-08 11:06:31 +01:00
Jesper Nilsson
f12bb5c04a CRIS v10: Remove useless CVS id and log from lib/dram_init.S 2008-02-08 11:06:31 +01:00
Jesper Nilsson
da4d091348 CRIS v10: Remove useless CVS id from kernel/shadows.c 2008-02-08 11:06:31 +01:00
Jesper Nilsson
b2d0814258 CRIS v10: Reformat drivers/makefile using tabs. 2008-02-08 11:06:31 +01:00
Jesper Nilsson
c3d6ddddb0 CRIS: Move common Kconfig variable ETRAX_RTC to arch independet Kconfig. 2008-02-08 11:06:30 +01:00
Jesper Nilsson
5062969d77 CRIS: Remove NO_IOMEM config, we have IO memory. 2008-02-08 11:06:30 +01:00
Jesper Nilsson
10f9f9c857 CRIS v10: Remove CVS id from kernel/process.c 2008-02-08 11:06:30 +01:00
Jesper Nilsson
c8acccc959 CRIS v10: Remove CVS log and id from kernel/kgdb.c 2008-02-08 11:06:30 +01:00
Jesper Nilsson
8d67bca55c CRIS v10: Cleanup kernel/irq.c
- Remove useless CVS id tag.
- Remove no longer needed extern declarations for kgdb.
2008-02-08 11:06:30 +01:00
Jesper Nilsson
4200c35d20 CRIS v10: Cleanup kernel/fasttimer.c
- Change C99 comment style to C89.
- Remove superfluous SANITYCHECK macro, test FAST_TIMER_SANITY_CHECKS instead.
2008-02-08 11:06:30 +01:00
Jesper Nilsson
72af70cfec CRIS v10: Cleanup kernel/entry.S CVS log and id. 2008-02-08 11:06:30 +01:00
Jesper Nilsson
028a731f98 CRIS v10: Remove CVS id tag from kernel/dma.c 2008-02-08 11:06:30 +01:00
Jesper Nilsson
99bb22bd28 CRIS v10: Break long lines in boot/rescue/head.S 2008-02-08 11:06:30 +01:00
Jesper Nilsson
7cda012685 CRIS v10: Remove CVS tag from boot/compressed/misc.c 2008-02-08 11:06:29 +01:00
Jesper Nilsson
18b0f34616 CRIS v10: Update and fix bug in kernel/debugport.
- Move local_irq_save to after possible return in console_write_direct.
- Remove old raw_printk hack, not needed anymore.
- Add watchdog handling.
- Make serial_driver use depend on CONFIG_ETRAX_SERIAL.
- Remove useless CVS log.
2008-02-08 11:06:29 +01:00
Jesper Nilsson
34a8e501fe CRIS v10: Update driver for pcf8563
- Use mutex instead of spinlock, fixes kernel bugzilla report 8339.
- Make sure that pcf8563_init can be called multiple times but only setup once.
- Change RTC_VLOW_RD -> RTC_VL_READ, RTC_VLOW_SET -> RTC_VL_CLR
- Cache the voltage low value at driver init so the battery status
  information does not get 'accidentally' cleared when setting the RTC time.
- Add weekday handling.
- Correct leapyear handling to include 100 and 400 year exceptions.
- Correct whitespace and formatting errors.
- Remove useless CVS id tag.
2008-02-08 11:06:29 +01:00
Jesper Nilsson
e5d5cf2442 CRIS v10: Fix bugs in i2c_init and i2c_readreg
- Set the variable first to zero after first setup, so we can
  stop multiple calls to i2c_init from trying to setup i2c.

- The last byte read by the master in an i2c transfer needs to
  be NACKed, not ACKed.

- Also, remove useless CVS log and CVS id tags.
2008-02-08 11:06:29 +01:00
Jesper Nilsson
3d6c03fc22 CRIS v10: Cleanup drivers/eeprom.c to avoid import conflicts.
- Remove useless CVS log and CVS id tags.
- Whitespace fix and remove C++ comment.
2008-02-08 11:06:29 +01:00
Jesper Nilsson
d207cf5bb9 CRIS v10: Correct and cleanup boot/rescue/testrescue.S
- Correct include path for sv_addr_ag.h, should be asm/arch/
- Fix some whitespace errors.
- Remove useless CVS id tag.
2008-02-08 11:06:29 +01:00
Jesper Nilsson
ef8028a7ab CRIS v10: Correct and cleanup boot/rescue/kimagerescue.S
- Correct include path for sv_addr_ag.h, should be included from asm/arch/
- Remove useless CVS id tag.
- Correct whitespace errors and some formatting.
2008-02-08 11:06:29 +01:00
Jesper Nilsson
546cc14862 CRIS v10: Change boot/rescue/Makefile to use ccflags-y, asflags-y and ldflags-y.
Replace EXTRA_CFLAGS with ccflags-y.
Change ASFLAGS and LDFLAGS into asflags-y and ldflags-y, we only need
these flags in this makefile.
2008-02-08 11:06:29 +01:00
Jesper Nilsson
3c9547a504 CRIS v10: Update boot/compressed/Makefile to use ccflags-y and ldflags-y
Replace use of EXTRA_CFLAGS with ccflags-y and LDFLAGS with ldflags-y,
(we only need to change linker flags for this makefile)
2008-02-08 11:06:28 +01:00
Jesper Nilsson
fbdb5f865b CRIS v32: Update and improve kernel/time.c
- Shorten include paths to machine dependent header files.
- Register name for first timer is now regi_timer0.
- Remove raw_printk hack, use oops_in_progress instead.
- Add handling of CPU frequency scaling for CRIS.
- Remove regs parameter to timer_interrupt, get them from get_irq_regs instead.
- Whitespace and formatting changes.
2008-02-08 11:06:28 +01:00
Jesper Nilsson
bd1c8c54b9 CRIS v10: New default config. 2008-02-08 11:06:28 +01:00
Jesper Nilsson
9ce1ea751f CRIS v32: Update and improve kernel/traps.c
- Remove watchdog handling, handled elsewhere.
- Shorten include paths to machine dependent header files.
- Remove raw_printk hack, we now use oops_in_progress instead.
- Add handling of BUG for exception handlers (break 14).
- Formatting and whitespace changes.
2008-02-08 11:06:27 +01:00
Jesper Nilsson
8cca29b713 CRIS v32: Minor updates to kernel/process.c
- Shorten include paths for machine dependent header files.
- Remove unused extern declaration of etrax_gpio_wake_up_check.
- Register name for first timer is now regi_timer0.
2008-02-08 11:06:27 +01:00
Jesper Nilsson
693d9847b2 CRIS v32: Update and simplify kernel/irq.c.
- First timer register has changed name to timer0.
- Build IRQs with only IRQ number, mask bit will be calculated instead.
- Add more IRQs, up to 64 supported.
- Use arrays to hold which IRQs triggered instead of trying to do magic
  with two 32 bit values now that more than 32 IRQs are supported.
2008-02-08 11:06:27 +01:00
Jesper Nilsson
96e476697d CRIS v32: Update kernel/head.S
- Shorten include paths for machine specific header files.
- Add magic for booting NAND flash.
- Change CONFIG_ETRAXFS_SIM to CONFIG_ETRAX_VCS_SIM.
- Use assembler macros for initializing hardware (clocks)
- Add stubs for SMP slave CPUs.
- Search for cramfs or jffs2 if no romfs found.
- Initialize l2cache.
2008-02-08 11:06:27 +01:00
Jesper Nilsson
ec87ee20c2 CRIS v32: Update and improve fasttimer.c
- Change include path to machine dependent header files.
- Remove __INLINE__, it expands to inline anyway.
- Don't initialize static variables.
- Change timers to use fasttimer_t instead of timevals.
- Change name of timeval_cmp to fasttime_cmp to highlight this.
- Register name for first timer is regi_timer0, not regi_timer.
- Whitespace and formatting changes.
- Don't return if we're blocking interrupts, goto done and restore interrupts.
- Disable interrupts while walking the fasttimer list, only restore
  while doing the callback.
- Remove #ifdef DECLARE_WAITQUEUE, this code won't be used in another OS.
- Remove CVS log.
2008-02-08 11:06:27 +01:00
Jesper Nilsson
8226410262 CRIS v32: Update debugport.
- Shorten include paths to machine dependent headers.
- Add support for fifth serial port.
- Remove CONFIG_ETRAXFS_SIM and CONFIG_ETRAX_DEBUG_PORT_NULL, no longer used.
- Remove raw_printk and stupid_debug hack, no longer needed.
- Remove dummy console stuff, no longer needed.
- Correct some register type names.
- Correct some whitespace errors and formatting.
2008-02-08 11:06:27 +01:00
Jesper Nilsson
3f50c0673c CRIS v32: Update boot/rescue/head.S code.
- Add ifdef for ETRAX_AXISFLASHMAP to avoid compiling file unless it is set.
- Use assembler macros for setting up clocks.
- Don't copy image, just jump to it (only works for NOR flash)
2008-02-08 11:06:27 +01:00
Jesper Nilsson
a5d204bf36 CRIS v32: Update boot/compressed/misc.c
- Shorten include paths to machine specific headers.
- Remove fill_inbuf, not defined here.
- Return __dest as value from memcpy.
- Enable serial port hardware transmitter and receiver in serial_setup.
- Correct baudrate divisor calculation, changed from 4800 to 115200.
- Add support for Artpec-3 specific serial port setup.
- Initialize pinmux for the correct serial port.
2008-02-08 11:06:27 +01:00
Jesper Nilsson
247c3c959f CRIS v32: Update compressed head.S
- Fixes for NAND and NOR flash booting.
- Use assembler macros for common tasks (clocks, general io etc)
- Use (EtraxFS or Artpec-3) machine specific include for dram and hardware init.
2008-02-08 11:06:26 +01:00
Jesper Nilsson
5d23ff25b2 CRIS v32: Remove common gpio and nandflash, add mach-fs and mach-a3 as subdirs.
Also add board_mmcspi to build if ETRAX_SPI_MMC_BOARD is set.
(Generic MMC SPI implementation)
2008-02-08 11:06:26 +01:00
Jesper Nilsson
dbf9f14476 CRIS v32: Update boot rescue Kbuild makefile.
- Remove old specific targets, use more generic ones instead.
- Use if_changed to avoid creating new images when no change.
- Use EXTRA_CFLAGS instead of CFLAGS.
2008-02-08 11:06:26 +01:00
Jesper Nilsson
28bf739b12 CRIS v32: Update boot compressed Kbuild makefile.
- Remove old specific targets, use more generic ones instead.
- Use if_changed to avoid creating new images when no change.
- Use KBUILD_CFLAGS instead of CFLAGS.
2008-02-08 11:06:26 +01:00
Jesper Nilsson
3d6f7871ad CRIS v32: Update boot Kbuild makefile.
- Remove old specific targets, use more generic ones instead.
- Use if_changed to avoid creating new images when no change.
2008-02-08 11:06:26 +01:00
Jesper Nilsson
1e4cc2c8c7 CRIS v32: Update traps.c
- Remove raw_prink hack, use oops_in_progress instead.
- When ETRAX_WATCHDOG_NICE_DOGGY is set, loop in trap after oops dump
  instead of rebooting.
- Break long lines to less than 80 chars.
- Fix whitespace errors.
- Remove unnecessary comments.
2008-02-08 11:06:26 +01:00
Jesper Nilsson
32872b203b CRIS v10: Update and improve axisflashmap.c
- Add config to use mtd0 as whole flash device.
- Fix whitespace errors.
- Remove braces around single statement ifs.
- Break long lines.
- Remove unnecessary CVS log.
2008-02-08 11:06:26 +01:00
Jesper Nilsson
8c11bffae7 CRIS v10: Update rescue head.s
- Correct whitespace problems.
- Add ifdef for ETRAX_AXISFLASHMAP to avoid compile error when not set.
2008-02-08 11:06:26 +01:00
Jesper Nilsson
63e6b9a0b8 CRIS v10: Update rescue Kbuild makefile.
- Remove old specific targets, use more generic ones instead.
- Use if_changed to avoid creating new images when no change.
  Removes a lot of cruft.
- Use EXTRA_CFLAGS instead of CFLAGS.
2008-02-08 11:06:25 +01:00
Jesper Nilsson
1333a69483 CRIS v10: Update boot/compressed Kbuild makefile.
- Remove old specific targets, use more generic ones instead.
- Use if_changed to avoid creating new images when no change.
- Use EXTRA_CFLAGS instead of CFLAGS.
2008-02-08 11:06:25 +01:00
Jesper Nilsson
87f5a7f703 CRIS v10: Update boot Kbuild makefile.
- Remove old specific targets, use more generic ones instead.
2008-02-08 11:06:25 +01:00
Jesper Nilsson
2c2314bf6b CRIS: Update main Kbuild makefile.
- Remove old and non-generic targets, use generic ones instead.
- Add sub-arch as mach-fs or mach-a3 for EtraxFS and Artpec-3 respectively.
- Add links to sub-arch directories, and erase before trying to create them.
- Include from sub-arch specific include directory "mach".
- Add files to be cleaned in CLEAN_FILES instead of as archclean target.
2008-02-08 11:06:25 +01:00
Jesper Nilsson
5fc1f3122f CRIS v32: Update and improve axisflashmap
- Use default partition table when no partition is found (for initial tests)
- Add config ETRAX_AXISFLASHMAP_MTD0WHOLE to allow whole flash as mtd0.
- Add config for VCS simulator connection.
2008-02-08 11:06:25 +01:00
Jesper Nilsson
201ca54aa0 CRIS v32: New version of I2C driver.
- Add i2c_write and i2c_read as functions.
- Use spinlocks for critical regions.
- Add config item to set I2C data and clock port.
- Put unneeded testcode inside #if 0.
- Remove CVS id tag.
2008-02-08 11:06:25 +01:00
Jesper Nilsson
0f229504f8 CRIS v32: Fixup kernel Makefile.
- Remove CRISv32 common arbiter, dma, io and pinmux files,
  they are now defined in machine dependent directories.
- Add cache and cacheflush files for working around cache problems
  in CRISv32 chips.
2008-02-08 11:06:25 +01:00
Jesper Nilsson
ffc8b00d58 CRIS v32: Update entry.S to working order.
- Remove oldset parameter.
- Utilise delay-slot for parameter moving.
- Add kernel_execve as break 13.
- Add new kernel syscalls.
2008-02-08 11:06:25 +01:00
Jesper Nilsson
54ab4d7208 CRIS v32: Whitespace and formatting changes for kernel/ptrace.c 2008-02-08 11:06:24 +01:00
Jesper Nilsson
1ddba0257e CRIS: Minor generic kernel/traps.c changes.
- Collect extern declarations at top of file.
- Change raw_printk to printk, use oops_in_progress instead.
- Fix formatting and whitespace.
- Allow the watchdog to be disabled during oops.
2008-02-08 11:06:24 +01:00
Jesper Nilsson
3e1fdc4eac CRIS: Minor fixes to mm/fault.c
- Only disallow oops if we're in_interrupt context (was in_atomic before)
- Use the generic oops_in_progress instead of the raw_printk hack.
- Fix whitespace/formatting.
- Remove CVS log entries.
2008-02-08 11:06:24 +01:00
Jesper Nilsson
642d4ea065 CRIS: Remove unnecessary CVS log from cris/mm/init.c 2008-02-08 11:06:24 +01:00
Jesper Nilsson
e908dfc3c0 CRIS v32: Update synchronous serial driver.
Now uses a DMA descriptor ring, which should avoid any unnecessary
pauses in the streams.
2008-02-08 11:06:23 +01:00
Jesper Nilsson
f74c31d50c CRIS v32: Add L2 cache initialization code. 2008-02-08 11:06:23 +01:00
Jesper Nilsson
58d0831928 CRIS v32: Add hardware dependent include files and defconfigs for ETRAX FS and ARTPEC-3 chips.
The header files describe the hardware registers available in both
these chips, note that most of this documentation is automatically
generated from the hardware implementation.
2008-02-08 11:06:23 +01:00
Jesper Nilsson
035e111f9a CRIS v32: Add new machine dependent files for Etrax-FS and Artpec-3.
The two chips are somewhat different, and needs different handling.
Adds handing of the dma, dram initialization, hardware settings, io,
memory arbiter and pinmux

Also moves the dma, dram initialization and io from CRIS v32 common files.
2008-02-08 11:06:23 +01:00
Jesper Nilsson
6107c61fd3 CRIS v32: Add new driver files for Etrax-FS
Adds gpio and nandflash handling for Etrax-FS
2008-02-08 11:06:23 +01:00
Jesper Nilsson
18a1e013cd CRIS v32: Add new driver files for Artpec-3.
Adds gpio and nandflash handling for Artpec-3.
2008-02-08 11:06:22 +01:00
Jesper Nilsson
923dd2a463 CRIS: Rearrange Kconfigs for v10 and v32 to allow compilation without warnings.
- Remove some unneeded configs and add some new ones.
- Merge common config items to common file instead of duplicating them.
- Pull in standard Kconfig.preempt.
- Remove some unneeded Kconfigs for subsystems not (yet) available on CRIS
  (md, scsi, ieee1394, i2o, isdn, telephony, media, pcmcia, pci)
- Rename CRISv32 config items which had different types from CRISv10.
  (ETRAX_LED2G, ETRAX_LED2R, ETRAX_LED3G, ETRAX_LED3R, ETRAX_I2C_DATA_PORT,
  ETRAX_I2C_CLK_PORT)
2008-02-08 11:06:22 +01:00
Bernhard Walle
72a7fe3967 Introduce flags for reserve_bootmem()
This patchset adds a flags variable to reserve_bootmem() and uses the
BOOTMEM_EXCLUSIVE flag in crashkernel reservation code to detect collisions
between crashkernel area and already used memory.

This patch:

Change the reserve_bootmem() function to accept a new flag BOOTMEM_EXCLUSIVE.
If that flag is set, the function returns with -EBUSY if the memory already
has been reserved in the past.  This is to avoid conflicts.

Because that code runs before SMP initialisation, there's no race condition
inside reserve_bootmem_core().

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix powerpc build]
Signed-off-by: Bernhard Walle <bwalle@suse.de>
Cc: <linux-arch@vger.kernel.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:25 -08:00
Julia Lawall
6d9f4c5cfb arch/cris: add a missing iounmap
An extra error handling label is needed for the case where the ioremap has
succeeded.

The problem was detected using the following semantic match
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
type T,T1,T2;
identifier E;
statement S;
expression x1,x2;
constant C;
int ret;
@@

  T E;
  ...
* E = ioremap(...);
  if (E == NULL) S
  ... when != iounmap(E)
      when != if (E != NULL) { ... iounmap(E); ...}
      when != x1 = (T1)E
  if (...) {
    ... when != iounmap(E)
        when != if (E != NULL) { ... iounmap(E); ...}
        when != x2 = (T2)E
(
*   return;
|
*   return C;
|
*   return ret;
)
  }
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:24 -08:00
Jesper Nilsson
2d33d563b1 CRIS: avoid using arch links in Kconfig
Improve including of architecture dependent Kconfig files.

- Always include the architecture dependent Kconfig files.
- Wrap architecture dependent Kconfig files inside an appropriate
  "if ETRAX_ARCH_Vxx" block.

This makes it possible to run the configuration even without the arch links,
which are created later in the build process.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:24 -08:00
Davide Libenzi
4d672e7ac7 timerfd: new timerfd API
This is the new timerfd API as it is implemented by the following patch:

int timerfd_create(int clockid, int flags);
int timerfd_settime(int ufd, int flags,
		    const struct itimerspec *utmr,
		    struct itimerspec *otmr);
int timerfd_gettime(int ufd, struct itimerspec *otmr);

The timerfd_create() API creates an un-programmed timerfd fd.  The "clockid"
parameter can be either CLOCK_MONOTONIC or CLOCK_REALTIME.

The timerfd_settime() API give new settings by the timerfd fd, by optionally
retrieving the previous expiration time (in case the "otmr" parameter is not
NULL).

The time value specified in "utmr" is absolute, if the TFD_TIMER_ABSTIME bit
is set in the "flags" parameter.  Otherwise it's a relative time.

The timerfd_gettime() API returns the next expiration time of the timer, or
{0, 0} if the timerfd has not been set yet.

Like the previous timerfd API implementation, read(2) and poll(2) are
supported (with the same interface).  Here's a simple test program I used to
exercise the new timerfd APIs:

http://www.xmailserver.org/timerfd-test2.c

[akpm@linux-foundation.org: coding-style cleanups]
[akpm@linux-foundation.org: fix ia64 build]
[akpm@linux-foundation.org: fix m68k build]
[akpm@linux-foundation.org: fix mips build]
[akpm@linux-foundation.org: fix alpha, arm, blackfin, cris, m68k, s390, sparc and sparc64 builds]
[heiko.carstens@de.ibm.com: fix s390]
[akpm@linux-foundation.org: fix powerpc build]
[akpm@linux-foundation.org: fix sparc64 more]
Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:07 -08:00
Mathieu Desnoyers
125e564582 Move Kconfig.instrumentation to arch/Kconfig and init/Kconfig
Move the instrumentation Kconfig to

arch/Kconfig for architecture dependent options
  - oprofile
  - kprobes

and

init/Kconfig for architecture independent options
  - profiling
  - markers

Remove the "Instrumentation Support" menu. Everything moves to "General setup".
Delete the kernel/Kconfig.instrumentation file.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-03 08:58:08 +01:00
Sam Ravnborg
01ba2bdc6b all archs: consolidate init and exit sections in vmlinux.lds.h
This patch consolidate all definitions of .init.text, .init.data
and .exit.text, .exit.data section definitions in
the generic vmlinux.lds.h.

This is a preparational patch - alone it does not buy
us much good.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:21:17 +01:00
WANG Cong
42d71c44d5 CRIS: Remove 'TOPDIR' from Makefiles
This patch removes TOPDIR from Cris Makefiles.

Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Andreas Schwab <schwab@suse.de>
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
2008-01-28 23:14:37 +01:00
Greg Kroah-Hartman
52840bd628 Kobject: the cris iop_fw_load.c code is broken
This code is really really really broken.  So much so that it's almost
impossible to fix with a simple patch, so just comment out the offending
registration with the kobject core, and mark the driver as broken.

The problem is that the code is trying to register a "raw" struct
device, which is not allowed.  struct device is only for use within the
driver model.  This is being done to try to use the firmware layer which
wants a struct device.  To properly fix this, use something easy, like a
platform device, which is a struct device and can be used for this kind
of thing.

Cc: Mikael Starvik <starvik@axis.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:30 -08:00
Cyrill Gorcunov
a56d00bbea CRIS: add missed local_irq_restore call
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@akpm@linux-foundation.org>
2008-01-21 19:39:41 -08:00
Jesper Nilsson
b0e86f0a3b CRIS v10: vmlinux.lds.S: ix kernel oops on boot and use common defines
- Move alignment to page size of init data outside ifdef for BLK_DEV_INITRD.
  The reservation up to page size of memory after init data was previously
  not done if BLK_DEV_INITRD was undefined.
  This caused a kernel oops when init memory pages were freed after startup,
  data placed in the same page as the last init memory would also be freed
  and reused, with disastrous results.

- Use macros for initcalls and .text sections.

- Replace hardcoded page size constant with PAGE_SIZE define.

- Change include/asm-cris/page.h to use the _AC macro to instead
  of testing __ASSEMBLY__.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Mikael Starvik <mikael.starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-17 15:38:58 -08:00
Jesper Nilsson
bbde25b125 CRIS v10: driver for ds1302 needs to include cris-specific i2c.h
This fixes compilation error where i2c_init wasn't defined.
Also, remove the CVS log and version tags, they are no longer useful.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Mikael Starvik <mikael.starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-14 08:52:23 -08:00
Jesper Nilsson
d2d159dbd5 CRIS v10: kernel/time.c needs to include linux/vmstat.h to compile
This fixes compile error when nr_free_pages() from linux/swap.h
expands to global_page_state(NR_FREE_PAGES), but linux/vmstat.h isn't
included to declare global_page_state().

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Mikael Starvik <mikael.starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-14 08:52:23 -08:00
Jesper Nilsson
a4858d4dab CRIS v10: correct do_signal to fix oops and clean up signal handling in general
This fixes a kernel panic on boot due to do_signal not being compatible
with it's callers.

- do_signal now returns void, and does not have the previous signal set
  as a parameter.
- Remove sys_rt_sigsuspend, we can use the common one instead.
- Change sys_sigsuspend to be more like x86, don't call do_signal here.
- handle_signal, setup_frame and setup_rt_frame now return -EFAULT
  if we've delivered a segfault, which is used by callers to perform
  necessary cleanup.
- Break long lines, correct whitespace and formatting errors.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Mikael Starvik <mikael.starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-14 08:52:23 -08:00
Bartlomiej Zolnierkiewicz
c03a9278ad ide: move CONFIG_IDE_ETRAX to drivers/ide/Kconfig
* Move ETRAX_IDE and friends from arch/cris/arch-{v10,v32}/drivers/Kconfig
  to drivers/ide/Kconfig.

* Don't force selecting ide-disk and ide-cd device drivers
  (please handle this through defconfig if necessary).

* Make ETRAX_IDE depend on BROKEN for the time being
  (it doesn't even compile currently).

Cc: Mikael Starvik <starvik@axis.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-11-27 21:35:55 +01:00
Jesper Nilsson
2f1f53bdc6 CRISv10 fasttimer: Scrap INLINE and name timeval_cmp better
Scrap the local __INLINE__ macro, and rename timeval_cmp to fasttime_cmp.

Inline macro was completely unnecessary since the macro was defined
locally to be inline.
timeval_cmp was inaccurately named since it does comparison on
struct fasttimer_t and not on struct timeval.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Mikael Starvik <mikael.starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:47 -08:00
Jesper Nilsson
2e2cd8bad6 CRISv10 memset library add lineendings to asm
Add \n\ at end of lines inside asm statement to avoid warning.

No change except adding \n\ to end of line and correcting
whitespace has been done.
Removes warning about multi-line string literals when compiling
arch/cris/arch-v10/lib/memset.c

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Mikael Starvik <mikael.starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:47 -08:00
Jesper Nilsson
341ac6e4be CRISv10 string library add lineendings to asm
Add \n\ at end of lines inside asm statement to avoid warning.

No change except adding \n\ to end of line and correcting
whitespace has been done.
Removes warning about multi-line string literals when compiling
arch/cris/arch-v10/lib/string.c

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Mikael Starvik <mikael.starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:47 -08:00
Jesper Nilsson
2b05d2b3b4 CRISv10 usercopy library add lineendings to asm
Removes warning when compiling arch/cris/arch-v10/lib/usercopy.c

No change except adding \n\ on the end of the lines has been done.
Removes warning about multi-line string literals.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Mikael Starvik <mikael.starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:47 -08:00
Jesper Nilsson
57c230a873 CRISv32: add cache flush operations
These are needed due to a cache bug, and can be used to make sure that the
DMA descriptors are flushed to memory and can be safely handled by DMA.

flush_dma_descr - Flush one DMA descriptor.
flush_dma_list - Flush a complete list of DMA descriptors.
cris_flush_cache - Flush the complete cache.
cris_flush_cache_range - Flush only the specified range

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:47 -08:00
Jesper Nilsson
d8e5219f9f CRISv10 improve and bugfix fasttimer
Improve and bugfix CRIS v10 fast timers.

- irq_handler_t now only takes two arguments.
- Keep interrupts disabled as long as we have a reference to the
  fasttimer list and only enable them while doing the callback.
  del_fast_timer may be called from other interrupt context.
- Fix bug where debug code could return without calling local_irq_restore.
- Use jiffies instead of usec (change from struct timeval to fasttime_t).
- Don't initialize static variables to zero.
- Remove obsolete #ifndef DECLARE_WAITQUEUE code.
- fast_timer_init should be __initcall.
- Change status/debug variables to unsigned.
- Remove CVS log and CVS id.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Mikael Starvik <mikael.starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:47 -08:00
Jesper Nilsson
3244c77bd3 CRISv10: fix timer interrupt parameters
Fix timer interrupt parameters for CRIS v10.

- irq_handler_t only takes two arguments, use get_irq_regs to get
  regs for profiling.
- Call update_process_times.
- Remove CVS tag.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Mikael Starvik <mikael.starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:47 -08:00
Jesper Nilsson
1b8be1d82d CRIS: remove MTD_AMSTD and MTD_OBSOLETE_CHIPS take two
Remove MTD_AMDSTD and MTD_OBSOLETE_CHIPS from defconfig, Kconfig and code,
instead we'll use MTD_CFI or MTD_JEDECPROBE.

[akpm@linux-foundation.org: codingl-style cleanups]
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:46 -08:00
Alex Unleashed
16ad1b4910 cris: ARRAY_SIZE() cleanup
I'm converting most array size calculations under arch/ to use
ARRAY_SIZE().  This is the patch for CRIS.

Signed-off-by: Alejandro Martinez Ruiz <alex@flawedcode.org>
Cc: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:46 -08:00
Jesper Nilsson
f150f35232 cris build fixes: defconfig updates
Remove some unused config lines, and add some others that needs to be off
for a succesful compile. This is the minimal set of changes for 2.6.23.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:46 -08:00
Jesper Nilsson
5af26b1862 cris build fixes: fix crisksyms.c
- Add __negdi2 to exported symbols.
- Remove string functions from exported symbols.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:46 -08:00