According to one of Jann's OOPS reports it looks like
BUG_ON(timer_pending(timer)) triggers during add_timer()
in ax25_start_t1timer(). This patch changes current use
of: init_timer(), add_timer() and del_timer() to
setup_timer() with mod_timer(), which should be safer
anyway.
Reported-by: Jann Traschewski <jann@gmx.de>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kosaki Motohito noted that "numactl --interleave=all ..." failed in the
presence of memoryless nodes. This patch attempts to fix that problem.
Some background:
numactl --interleave=all calls set_mempolicy(2) with a fully populated
[out to MAXNUMNODES] nodemask. set_mempolicy() [in do_set_mempolicy()]
calls contextualize_policy() which requires that the nodemask be a
subset of the current task's mems_allowed; else EINVAL will be returned.
A task's mems_allowed will always be a subset of node_states[N_HIGH_MEMORY]
i.e., nodes with memory. So, a fully populated nodemask will be
declared invalid if it includes memoryless nodes.
NOTE: the same thing will occur when running in a cpuset
with restricted mem_allowed--for the same reason:
node mask contains dis-allowed nodes.
mbind(2), on the other hand, just masks off any nodes in the nodemask
that are not included in the caller's mems_allowed.
In each case [mbind() and set_mempolicy()], mpol_check_policy() will
complain [again, resulting in EINVAL] if the nodemask contains any
memoryless nodes. This is somewhat redundant as mpol_new() will remove
memoryless nodes for interleave policy, as will bind_zonelist()--called
by mpol_new() for BIND policy.
Proposed fix:
1) modify contextualize_policy logic to:
a) remember whether the incoming node mask is empty.
b) if not, restrict the nodemask to allowed nodes, as is
currently done in-line for mbind(). This guarantees
that the resulting mask includes only nodes with memory.
NOTE: this is a [benign, IMO] change in behavior for
set_mempolicy(). Dis-allowed nodes will be
silently ignored, rather than returning an error.
c) fold this code into mpol_check_policy(), replace 2 calls to
contextualize_policy() to call mpol_check_policy() directly
and remove contextualize_policy().
2) In existing mpol_check_policy() logic, after "contextualization":
a) MPOL_DEFAULT: require that in coming mask "was_empty"
b) MPOL_{BIND|INTERLEAVE}: require that contextualized nodemask
contains at least one node.
c) add a case for MPOL_PREFERRED: if in coming was not empty
and resulting mask IS empty, user specified invalid nodes.
Return EINVAL.
c) remove the now redundant check for memoryless nodes
3) remove the now redundant masking of policy nodes for interleave
policy from mpol_new().
4) Now that mpol_check_policy() contextualizes the nodemask, remove
the in-line nodes_and() from sys_mbind(). I believe that this
restores mbind() to the behavior before the memoryless-nodes
patch series. E.g., we'll no longer treat an invalid nodemask
with MPOL_PREFERRED as local allocation.
[ Patch history:
v1 -> v2:
- Communicate whether or not incoming node mask was empty to
mpol_check_policy() for better error checking.
- As suggested by David Rientjes, remove the now unused
cpuset_nodes_subset_current_mems_allowed() from cpuset.h
v2 -> v3:
- As suggested by Kosaki Motohito, fold the "contextualization"
of policy nodemask into mpol_check_policy(). Looks a little
cleaner. ]
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Tested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This avoids warnings with unreferenced variables in the !NUMA case.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit bdc807871d broke the build
for this config because the sim_defconfig selects CONFIG_HZ=250
but include/asm-ia64/param.h has an ifdef for the simulator to
force HZ to 32. So we ended up with a kernel/timeconst.h set
for HZ=250 ... which then failed the check for the right HZ
value and died with:
Drop the #ifdef magic from param.h and make force CONFIG_HZ=32
directly for the simulator.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Since the sg chaining patches went in, our current value of 255 for
SG_ALL excites chaining on some drivers which cannot support it (and
would thus oops). Redefine SG_ALL to mean no sg table size
preference, but use the single allocation (non chained) limit. This
also helps for drivers that use it to size an internal table.
We'll do an opt in system later where truly chaining supporting
drivers can define their sg_tablesize to be anything up to
SCSI_MAX_SG_CHAIN_ELEMENTS.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Without this patch a Opteron test system here oopses at boot with
current git.
Calling to_pci_dev() on a NULL pointer gives a negative value so the
following NULL pointer check never triggers and then an illegal address
is referenced. Check the unadjusted original device pointer for NULL
instead.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://linux-nfs.org/~bfields/linux:
SUNPRC: Fix printk format warning
nfsd: clean up svc_reserve_auth()
NLM: don't requeue block if it was invalidated while GRANT_MSG was in flight
NLM: don't reattempt GRANT_MSG when there is already an RPC in flight
NLM: have server-side RPC clients default to soft RPC tasks
NLM: set RPC_CLNT_CREATE_NOPING for NLM RPC clients
Allow the platform data to specify to the DM9000 driver
that there is no posibility of an attached EEPROM on the
device, so default all reads to 0xff and ignore any
write operations.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Patch from: Laurent Pinchart <laurentp@cse-semaphore.com>
This patch adds a flag to the DM9000 platform data which, when set,
configures the device to use an external PHY.
Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
Signed-off-by: Ben Dooks <ben-linuy@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
The old code (before move) stopped further processing of the
event after it has been already processed by the quirk handler.
The new code didn't propagate the return value properly, and
therefore the processing always proceeded, which was wrong.
This patch fixes it. Pointed out in kernel.org bugzilla #9842
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
commit 813a0eb233
Author: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Fri Jan 25 22:17:10 2008 +0100
ide: switch idedisk_prepare_flush() to use REQ_TYPE_ATA_TASKFILE requests
...
broke flush requests.
Allocating IDE command structure on the stack for flush requests is not
a very brilliant idea:
- idedisk_prepare_flush() only prepares the request and it doesn't wait
for it to be completed
- there are can be multiple flush requests queued in the queue
Fix the problem (per hints from James Bottomley) by:
- dynamically allocating ide_task_t instance using kmalloc(..., GFP_ATOMIC)
- adding new taskfile flag (IDE_TFLAG_DYN)
- calling kfree() in ide_end_drive_command() if IDE_TFLAG_DYN is set
(while at it rename 'args' to 'task' and fix whitespace damage)
[ This will be fixed properly before 2.6.25 but this bug is rather
critical and the proper solution requires some more work + testing. ]
Thanks to Sebastian Siewior and Christoph Hellwig for reporting the
problem and testing patches (extra thanks to Sebastian for bisecting
it to the guilty commmit).
Tested-by: Sebastian Siewior <ide-bug@ml.breakpoint.cc>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Introduce new option CONFIG_BLK_DEV_IDEDMA_SFF for non-PCI SFF-8038i compatible
bus mastering IDE controllers (which there are a few known), thus fixing a hack
made for Palmchip BK3710 controller...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Anton Salnikov <asalnikov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
This is a void function attempting to return the return value from
another void function, which seems harmless but extremely weird, and
apparently makes some compilers complain.
While we're there, clean up a little (e.g. the switch statement had a
minor style problem and seemed overkill as long as there's only one
case).
Thanks to Trond for noticing this.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (30 commits)
[ARM] constify function pointer tables
[ARM] 4823/1: AT91 section fix
[ARM] 4824/1: pxa: clear RDH bit after any reset
[ARM] pxa: remove debugging PM: printk
ARM: OMAP1: Misc clean-up
ARM: OMAP1: Update defconfigs for omap1
ARM: OMAP1: Palm Tungsten E board clean-up
ARM: OMAP1: Use I2C bus registration helper for omap1
ARM: OMAP1: Remove omap_sram_idle()
ARM: OMAP1: PM fixes for OMAP1
ARM: OMAP1: Use MMC multislot structures for Siemens SX1 board
ARM: OMAP1: Make omap1 use MMC multislot structures
ARM: OMAP1: Change the comments to C style
ARM: OMAP1: Make omap1 boards to use omap_nand_platform_data
ARM: OMAP: Add helper module for board specific I2C bus registration
ARM: OMAP: Add dmtimer support for OMAP3
ARM: OMAP: Pre-3430 clean-up for dmtimer.c
ARM: OMAP: Add DMA support for chaining and 3430
ARM: OMAP: Add 24xx GPIO debounce support
ARM: OMAP: Get rid of unnecessary ifdefs in GPIO code
...
We want to allow different implementations of pci_raw_ops for standard
and extended config space on x86. Rather than clutter generic code with
knowledge of this, we make pci_raw_ops private to x86 and use it to
implement the new raw interface -- raw_pci_read() and raw_pci_write().
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Spotted by Pavel Emelyanov and Alexey Dobriyan.
hrtimer_nanosleep() sets restart_block->arg1 = rmtp, but this rmtp points to
the local variable which lives in the caller's stack frame. This means that
if sys_restart_syscall() actually happens and it is interrupted as well, we
don't update the user-space variable, but write into the already dead stack
frame.
Introduced by commit 04c227140f
hrtimer: Rework hrtimer_nanosleep to make sys_compat_nanosleep easier
Change the callers to pass "__user *rmtp" to hrtimer_nanosleep(), and change
hrtimer_nanosleep() to use copy_to_user() to actually update *rmtp.
Small problem remains. man 2 nanosleep states that *rtmp should be written if
nanosleep() was interrupted (it says nothing whether it is OK to update *rmtp
if nanosleep returns 0), but (with or without this patch) we can dirty *rem
even if nanosleep() returns 0.
NOTE: this patch doesn't change compat_sys_nanosleep(), because it has other
bugs. Fixed by the next patch.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Alexey Dobriyan <adobriyan@sw.ru>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: Pavel Emelyanov <xemul@sw.ru>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Toyo Abe <toyoa@mvista.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
include/linux/hrtimer.h | 2 -
kernel/hrtimer.c | 51 +++++++++++++++++++++++++-----------------------
kernel/posix-timers.c | 14 +------------
3 files changed, 30 insertions(+), 37 deletions(-)
clocksource initialization and error accumulation. This corrects a 280ppm
drift seen on some systems using acpi_pm, and affects other clocksources as
well (likely to a lesser degree).
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This flag is simply a generic "this is a crash/burn test filesystem"
marker. If it is set, then filesystem code which is "in development"
will be allowed to mount the filesystem. Filesystem code which is not
considered ready for prime-time will check for this flag, and if it is
not set, it will refuse to touch the filesystem.
As we start rolling ext4 out to distro's like Fedora, et. al, this makes
it less likely that a user might accidentally start using ext4 on a
production filesystem; a bad thing, since that will essentially make it
be unfsckable until e2fsprogs catches up.
Signed-off-by: Theodore Tso <tytso@MIT.EDU>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
* master:
[ARM] constify function pointer tables
[ARM] 4823/1: AT91 section fix
[ARM] 4824/1: pxa: clear RDH bit after any reset
[ARM] pxa: remove debugging PM: printk
* omap1-upstream:
ARM: OMAP1: Misc clean-up
ARM: OMAP1: Update defconfigs for omap1
ARM: OMAP1: Palm Tungsten E board clean-up
ARM: OMAP1: Use I2C bus registration helper for omap1
ARM: OMAP1: Remove omap_sram_idle()
ARM: OMAP1: PM fixes for OMAP1
ARM: OMAP1: Use MMC multislot structures for Siemens SX1 board
ARM: OMAP1: Make omap1 use MMC multislot structures
ARM: OMAP1: Change the comments to C style
ARM: OMAP1: Make omap1 boards to use omap_nand_platform_data
ARM: OMAP: Add helper module for board specific I2C bus registration
ARM: OMAP: Add dmtimer support for OMAP3
ARM: OMAP: Pre-3430 clean-up for dmtimer.c
ARM: OMAP: Add DMA support for chaining and 3430
ARM: OMAP: Add 24xx GPIO debounce support
ARM: OMAP: Get rid of unnecessary ifdefs in GPIO code
ARM: OMAP: Add 3430 gpio support
ARM: OMAP: Add 3430 CPU identification macros
ARM: OMAP: Request DSP memory for McBSP
* orion:
[ARM] Orion: Use the sata_mv driver for the TS-209 SATA
[ARM] Orion: Use the sata_mv driver for the Kurobox SATA
[ARM] Orion: free up kernel virtual address space
[ARM] Orion: distinguish between physical and virtual addresses
[ARM] Orion: kill orion_early_putstr()
[ARM] Orion: update defconfig
[ARM] Orion: Use the sata_mv driver for the integrated SATA controller
DEBUG_PAGEALLOC was not possible on 64-bit due to its early-bootup
hardcoded reliance on PSE pages, and the unrobustness of the runtime
splitup of large pages. The splitup ended in recursive calls to
alloc_pages() when a page for a pte split was requested.
Avoid the recursion with a preallocated page pool, which is used to
split up large mappings and gets refilled in the return path of
kernel_map_pages after the split has been done. The size of the page
pool is adjusted to the available memory.
This part just implements the page pool and the initialization w/o
using it yet.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Specifically the boot time page tables in a CONFIG_X86_PAE=y enabled
kernel are in PAE format.
early_ioremap is updated to use the standard page table accessors.
Clear any mappings beyond max_low_pfn from the boot page tables in
native_pagetable_setup_start because the initial mappings can extend
beyond the range of physical memory and into the vmalloc area.
Derived from patches by Eric Biederman and H. Peter Anvin.
[ jeremy@goop.org: PAE swapper_pg_dir needs to be page-sized fix ]
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Mika Penttilä <mika.penttila@kolumbus.fi>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Other than the defconfigs, remove the entry in compiler-gcc4.h,
Kconfig.debug and feature-removal-schedule.txt.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add function definition and extern variables to asm-x86/acpi.h.
All of these are used in bus.c in ifdef(CONFIG_X86) sections, so are
only added to the x86 include headers. boot.c already includes acpi.h
so no changes are needed there.
Fixes the following:
arch/x86/kernel/acpi/boot.c:83:4: warning: symbol 'acpi_sci_flags' was not declared. Should it be static?
arch/x86/kernel/acpi/boot.c:84:5: warning: symbol 'acpi_sci_override_gsi' was not declared. Should it be static?
arch/x86/kernel/acpi/boot.c:421:13: warning: symbol 'acpi_pic_sci_set_trigger' was not declared. Should it be static?
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Adjust the definition of lookup_address to take an unsigned long
level argument. Adjust callers in xen/mmu.c that pass in a
dummy variable.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
There isn't much value to always detecting the MFGPT timers on
Geode platforms; detection is only needed when something wants
to use the timers. Move the detection code so that it gets
called the first time a timer is allocated.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We need to be called from elsewhere, and this gets some #ifdefs out
of the .c file.
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We had planned to use the 'owner' field for allowing re-allocation of
MFGPTs; however, doing it by module owner name isn't flexible enough. So,
drop this for now. If it turns out that we need timers in modules, we'll
need to come up with a scheme that matches the write-once fields of the
MFGPTx_SETUP register, and drops ponies from the sky.
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Sony MemoryStick cards are used in many products manufactured by Sony.
They are available both as storage and as IO expansion cards. Currently,
only MemoryStick Pro storage cards are supported via TI FlashMedia
MemoryStick interface.
[mboton@gmail.com: biuld fix]
[akpm@linux-foundation.org: build fix]
Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Miguel Boton <mboton@gmail.co>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CC init/main.o
In file included from include2/asm/uaccess.h:8,
from include/linux/poll.h:13,
from include/linux/rtc.h:113,
from include/linux/efi.h:19,
from linux-2.6/init/main.c:43:
include/linux/mm.h:1151:
error: expected declaration specifiers or '...' before 'pgtable_t'
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reported-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The pte_fn_t in include/linux/mm.h make it necessary for all architectures
to define a pgtable_t type, even those that do not have an mmu.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm_cgroup() is exclusively used to test whether an mm's mem_cgroup pointer
is pointing to a specific cgroup. Instead of returning the pointer, we can
just do the test itself in a new macro:
vm_match_cgroup(mm, cgroup)
returns non-zero if the mm's mem_cgroup points to cgroup. Otherwise it
returns zero.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CC mm/vmscan.o
In file included from
/home/bunk/linux/kernel-2.6/git/linux-2.6/mm/vmscan.c:44:
/home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/swapops.h: In function 'is_swap_pte':
/home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/swapops.h:48: error: implicit declaration of function 'pte_none'
/home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/swapops.h:48: error: implicit declaration of function 'pte_present'
Does it ever make sense to ask "is this pte a swap entry?" on a machine
with no MMU? Presumably this also means it has no ptes too, right? In
which case, it's better to comment the whole function out. Then when
someone tries to ask the above meaningless question, they get a compile
error rather than a meaningless answer.
Signed-off-by: Matt Mackall <mpm@selenic.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Reported-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add support for different number of page table levels dependent
on the highest address used for a process. This will cause a 31 bit
process to use a two level page table instead of the four level page
table that is the default after the pud has been introduced. Likewise
a normal 64 bit process will use three levels instead of four. Only
if a process runs out of the 4 tera bytes which can be addressed with
a three level page table the fourth level is dynamically added. Then
the process can use up to 8 peta byte.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
With the new space saving spinlock_t and a non-debug configuration
the struct page only has 32 bytes for 31 bit s390. The causes an
overflow in the calculation of VMEM_MAX_PHYS which renders the
kernel unbootable.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The black art of inline assemblies.. The new __ffs_word_loop/
__ffz_word_loop inline assemblies need an early clobber for the
two input/output variables.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Note that because of minimum compiler version enforcement in
linux/compiler.h these days the check for sparc32 buggy
__builtin_trap() can be safely removed.
Signed-off-by: David S. Miller <davem@davemloft.net>
There are no callers of this on the Sparc platforms.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mimicks almost perfectly the powerpc IOMMU code, except that it
doesn't have the IOMMU_PAGE_SIZE != PAGE_SIZE handling, and it also
lacks the device dma mask support bits.
I'll add that later as time permits, but this gets us at least back to
where we were beforehand.
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes the build, but acpi_fan_add() still needs
to be updated to handle thermal_cooling_device_register()
returning NULL as a non-fatal condition.
Signed-off-by: Len Brown <len.brown@intel.com>
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] Fix large MCA bootmem allocation
[IA64] Simplify cpu_idle_wait
[IA64] Synchronize RBS on PTRACE_ATTACH
[IA64] Synchronize kernel RSE to user-space and back
[IA64] Rename TIF_PERFMON_WORK back to TIF_NOTIFY_RESUME
[IA64] Wire up timerfd_{create,settime,gettime} syscalls
Commit 2f569afd9c ("CONFIG_HIGHPTE vs.
sub-page page tables") caused some build breakage due to pgtable_t only
getting declared in the CONFIG_X86_PAE case.
Move the declaration outside the PAE section.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
IB/core: Remove unused struct ib_device.flags member
IB/core: Add IP checksum offload support
IPoIB: Add send gather support
IPoIB: Add high DMA feature flag
IB/mlx4: Use multiple WQ blocks to post smaller send WQEs
mlx4_core: Clean up struct mlx4_buf
mlx4_core: For 64-bit systems, vmap() kernel queue buffers
IB/mlx4: Consolidate code to get an entry from a struct mlx4_buf
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (24 commits)
[Blackfin] arch: import defines for BF547 -- it is just like the BF548, but no CAN
[Blackfin] arch: fix build fails only include header files when enabled
[Blackfin] arch: declare default INSTALL_PATH for Blackfin ports
[Blackfin] arch: Encourage users to use the spidev character driver: Provide platform support
[Blackfin] arch: Enable UART2 and UART3 for bf548
[Blackfin] arch: Enable NET2272 on BF561-EZkit - remove request_mem_region
[Blackfin] arch:Fix BUG [#3876] pfbutton test for BTN3 on bf533 don't show complete info
[Blackfin] arch: remove duplicated definitions of the line discipline numbers N_* in asm-blackfin/termios.h
[Blackfin] arch: fix building with mtd uclinux by putting the mtd_phys option into the function it actually gets used in
[Blackfin] arch: simpler header and update dates
[Blackfin] arch: move the init sections to the end of memory
[Blackfin] arch: change the trace buffer control start/stop logic in the exception handlers
[Blackfin] arch: fix typo in printk message
[Blackfin] arch: this is an ezkit, not a stamp, so fixup the init function name
[Blackfin] arch: add slightly better help text for CPLB_INFO
[Blackfin] arch: Fix BUG - Enable ISP1362 driver to work ok with BF561
[Blackfin] arch: Fix header file information
[Blackfin] arch: Add Support for ISP1362
[Blackfin] arch: add support for cmdline partitioning to the BF533-STAMP flash map driver and enable it as a module by default
[Blackfin] arch: hook up set_irq_wake in Blackfin's irq code
...
Thanks to Kay for keeping us honest.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Cc: "Williams, Dan J" <dan.j.williams@intel.com>
Acked-by: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/xtensa/kernel/syscall.c:39:
include2/asm/unistd.h:681: error: 'sys_timerfd' undeclared here (not in a function)
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Christian Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the FRV cmpxchg_local by breaking the following header dependency loop :
linux/kernel.h -> linux/bitops.h -> asm-frv/bitops.h -> asm-frv/atomic.h
-> asm-frv/system.h ->
asm-generic/cmpxchg_local.h -> typecheck() defined in linux/kernel.h
and
linux/kernel.h -> linux/bitops.h -> asm-frv/bitops.h -> asm-frv/atomic.h ->
asm-generic/cmpxchg_local.h -> typecheck() defined in linux/kernel.h
In order to fix this :
- Move the atomic_test_and_ *_mask inlines from asm-frv/atomic.h (why are they
there at all anyway ? They are not touching atomic_t variables!) to
asm-frv/bitops.h.
Also fix a build issue with cmpxchg : it does not cast to (unsigned long *)
like other architectures, to deal with it in the cmpxchg_local macro.
FRV builds fine with this patch.
Thanks to Adrian Bunk <bunk@kernel.org> for spotting this bug.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Adrian Bunk <bunk@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a device capability to show when it can handle checksum offload.
Also add a send flag for inserting checksums and a csum_ok field to
the completion record.
Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
ConnectX HCA supports shrinking WQEs, so that a single work request
can be made of multiple units of wqe_shift. This way, WRs can differ
in size, and do not have to be a power of 2 in size, saving memory and
speeding up send WR posting. Unfortunately, if we do this then the
wqe_index field in CQEs can't be used to look up the WR ID anymore, so
our implementation does this only if selective signaling is off.
Further, on 32-bit platforms, we can't use vmap() to make the QP
buffer virtually contigious. Thus we have to use constant-sized WRs to
make sure a WR is always fully within a single page-sized chunk.
Finally, we use WRs with the NOP opcode to avoid wrapping around the
queue buffer in the middle of posting a WR, and we set the
NoErrorCompletion bit to avoid getting completions with error for NOP
WRs. However, NEC is only supported starting with firmware 2.2.232,
so we use constant-sized WRs for older firmware. And, since MLX QPs
only support SEND, we use constant-sized WRs in this case.
When stamping during NOP posting, do stamping following setting of the
NOP WQE valid bit.
Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
When attaching to a stopped process, the RSE must be explicitly
synced to user-space, so the debugger can read the correct values.
Signed-off-by: Petr Tesarik <ptesarik@suse.cz>
CC: Roland McGrath <roland@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
This is base kernel patch for ptrace RSE bug. It's basically a backport
from the utrace RSE patch I sent out several weeks ago. please review.
when a thread is stopped (ptraced), debugger might change thread's user
stack (change memory directly), and we must avoid the RSE stored in
kernel to override user stack (user space's RSE is newer than kernel's
in the case). To workaround the issue, we copy kernel RSE to user RSE
before the task is stopped, so user RSE has updated data. we then copy
user RSE to kernel after the task is resummed from traced stop and
kernel will use the newer RSE to return to user.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Petr Tesarik <ptesarik@suse.cz>
CC: Roland McGrath <roland@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Since the RSE synchronization will need a TIF_ flag, but all
work-to-be-done bits are already used, so we have to multiplex
TIF_NOTIFY_RESUME again.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Petr Tesarik <ptesarik@suse.cz>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Use MMC multislot structures for Siemens SX1 board
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Make omap1 use new MMC multislot structures. The related MMC
patches will be sent separately.
Signed-off-by: Felipe Balbi <felipe.lima@indt.org.br>
Signed-off-by: Anderson Briglia <anderson.briglia@indt.org.br>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: David Cohen <david.cohen@indt.org.br>
Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch adds omap_nand_platform data based on a patch
by Shahrom Sharif-Kashani <sshahrom@micron.com>, and makes
omap1 boards to use omap_nand_platform_data instead of
nand_platform_data used earlier.
Signed-off-by: Tony Lindgren <tony@atomide.com>
This helper module simplifies I2C bus registration for different OMAP
platforms by doing registration in one place only and to allow board
specific bus configuration like clock rate and number of busses configured.
Helper should cover OMAP processors from first to third generation.
This patch just adds the feature and current implementation cleanup and
board file modifications will be done in following patches.
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add DMA support for chaining and 3430.
Also remove old DEBUG_PRINTS as noted by Russell King.
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add 24xx GPIO debounce support. Also minor formatting
clean-up.
Signed-off-by: Kevin Hilman <khilman@mvista.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch adds 3430 gpio support.
It also contains a fix by Paul Walmsley <paul@pwsan.com> to use the
correct clock names for OMAP3430.
Signed-off-by: Syed Mohammed Khasim <x0khasim@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch adds omap3430 CPU identification macros.
Silicon revision check macros added by Girish S G <girishsg@ti.com>.
CPU identification macro and silicon revision check macros
cleaned up by Paul Walmsley <paul@pwsan.com>.
Signed-off-by: Syed Mohammed Khasim <x0khasim@ti.com>
Signed-off-by: Girish S G <girishsg@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
* 'cris' of git://www.jni.nu/cris: (158 commits)
CRIS v32: Remove hwregs/timer_defs.h, it is now architecture specific.
CRIS v32: Change drivers/i2c.c locking.
CRIS v32: Rewrite ARTPEC-3 gpio driver to avoid volatiles and general cleanup.
CRIS: Add new timerfd syscall entries.
MAINTAINERS: Add my information for the CRIS port.
CRIS v32: Correct spelling of bandwidth in function name.
CRIS v32: Clean up nandflash.c for ARTPEC-3 and ETRAX FS.
CRIS v10: Cleanup of drivers/gpio.c
CRIS v10: drivers/net/cris/eth_v10.c rename LED defines to CRIS_LED to avoid name clash.
CRIS: Make io_pwm_set_period members unsigned in etraxgpio.h
CRIS: Move ETRAX_AXISFLASHMAP to common Kconfig file.
CRIS: Drop regs parameter from call to profile_tick in kernel/time.c
CRIS v32: Fix minor formatting issue in mach-a3/io.c
CRIS v32: Initialize GIO even if we're rambooting in kernel/head.S
CRIS v32: Remove kernel/arbiter.c, it now exists in machine dependent directory.
CRIS v32: Minor changes to avoid errors in asm-cris/arch-v32/hwregs/reg_rdwr.h
CRIS v32: arch-v32/hwregs/intr_vect_defs.h moved to machine dependent directory.
CRIS v32: Correct offset for TASK_pid in asm-cris/arch-v32/offset.h
CRIS v32: Move register map header to machine dependent directory.
CRIS v32: Let compiler know that memory is clobbered after a break op.
...
* 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
[POWERPC] Add arch-specific walk_memory_remove() for 64-bit powerpc
[POWERPC] Enable hotplug memory remove for 64-bit powerpc
[POWERPC] Add remove_memory() for 64-bit powerpc
[POWERPC] Make cell IOMMU fixed mapping printk more useful
[POWERPC] Fix potential cell IOMMU bug when switching back to default DMA ops
[POWERPC] Don't enable cell IOMMU fixed mapping if there are no dma-ranges
[POWERPC] Fix cell IOMMU null pointer explosion on old firmwares
[POWERPC] spufs: Fix timing dependent false return from spufs_run_spu
[POWERPC] spufs: No need to have a runnable SPU for libassist update
[POWERPC] spufs: Update SPU_Status[CISHP] in backing runcntl write
[POWERPC] spufs: Fix state_mutex leaks
[POWERPC] Disable G5 NAP mode during SMU commands on U3
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
[SPARC64]: Make use of the new fs/compat_binfmt_elf.c
[SPARC64]: Make use of compat_sys_ptrace()
Manually fixed trivial delete/modift conflict in arch/sparc64/kernel/binfmt_elf32.c
%fs needs to be copied from parent to child during fork.
Tidied up some whitespace while I was here.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Calculate TASK_SIZE at run-time by figuring out the host's VMSPLIT - this is
needed on i386 if UML is to run on hosts with varying VMSPLITs without
recompilation.
TASK_SIZE is now defined in terms of a variable, task_size. This gets rid of
an include of pgtable.h from processor.h, which can cause include loops.
On i386, task_size is calculated early in boot by probing the address space in
a binary search to figure out where the boundary between usable and non-usable
memory is. This tries to make sure that a page that is considered to be in
userspace is, or can be made, read-write. I'm concerned about a system-global
VDSO page in kernel memory being hit and considered to be a userspace page.
On x86_64, task_size is just the old value of CONFIG_TOP_ADDR.
A bunch of config variable are gone now. CONFIG_TOP_ADDR is directly replaced
by TASK_SIZE. NEST_LEVEL is gone since the relocation of the stubs makes it
irrelevant. All the HOST_VMSPLIT stuff is gone. All references to these in
arch/um/Makefile are also gone.
I noticed and fixed a missing extern in os.h when adding os_get_task_size.
Note: This has been revised to fix the 32-bit UML on 64-bit host bug that
Miklos ran into.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Background: I've implemented 1K/2K page tables for s390. These sub-page
page tables are required to properly support the s390 virtualization
instruction with KVM. The SIE instruction requires that the page tables
have 256 page table entries (pte) followed by 256 page status table entries
(pgste). The pgstes are only required if the process is using the SIE
instruction. The pgstes are updated by the hardware and by the hypervisor
for a number of reasons, one of them is dirty and reference bit tracking.
To avoid wasting memory the standard pte table allocation should return
1K/2K (31/64 bit) and 2K/4K if the process is using SIE.
Problem: Page size on s390 is 4K, page table size is 1K or 2K. That means
the s390 version for pte_alloc_one cannot return a pointer to a struct
page. Trouble is that with the CONFIG_HIGHPTE feature on x86 pte_alloc_one
cannot return a pointer to a pte either, since that would require more than
32 bit for the return value of pte_alloc_one (and the pte * would not be
accessible since its not kmapped).
Solution: The only solution I found to this dilemma is a new typedef: a
pgtable_t. For s390 pgtable_t will be a (pte *) - to be introduced with a
later patch. For everybody else it will be a (struct page *). The
additional problem with the initialization of the ptl lock and the
NR_PAGETABLE accounting is solved with a constructor pgtable_page_ctor and
a destructor pgtable_page_dtor. The page table allocation and free
functions need to call these two whenever a page table page is allocated or
freed. pmd_populate will get a pgtable_t instead of a struct page pointer.
To get the pgtable_t back from a pmd entry that has been installed with
pmd_populate a new function pmd_pgtable is added. It replaces the pmd_page
call in free_pte_range and apply_to_pte_range.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Probing non-ISA interrupts using the handle_percpu_irq as their handle_irq
method may crash the system because handle_percpu_irq does not check
IRQ_WAITING. This for example hits the MIPS Qemu configuration.
This patch provides two helper functions set_irq_noprobe and set_irq_probe to
set rsp. clear the IRQ_NOPROBE flag. The only current caller is MIPS code
but this really belongs into generic code.
As an aside, interrupt probing these days has become a mostly obsolete if not
dangerous art. I think Linux interrupts should be changed to default to
non-probing but that's subject of this patch.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-and-tested-by: Rob Landley <rob@landley.net>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is an outdated comment in serial_core.c also fixed.
Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, for every sysfs node, the callers will be responsible for
implementing store operation, so many many callers are doing duplicate
things to validate input, they have the same mistakes because they are
calling simple_strtol/ul/ll/uul, especially for module params, they are
just numeric, but you can echo such values as 0x1234xxx, 07777888 and
1234aaa, for these cases, module params store operation just ignores
succesive invalid char and converts prefix part to a numeric although input
is acctually invalid.
This patch tries to fix the aforementioned issues and implements
strict_strtox serial functions, kernel/params.c uses them to strictly
validate input, so module params will reject such values as 0x1234xxxx and
returns an error:
write error: Invalid argument
Any modules which export numeric sysfs node can use strict_strtox instead of
simple_strtox to reject any invalid input.
Here are some test results:
Before applying this patch:
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]# echo 0x1000 > /sys/module/e1000/parameters/copybreak
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]# echo 0x1000g > /sys/module/e1000/parameters/copybreak
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]# echo 0x1000gggggggg > /sys/module/e1000/parameters/copybreak
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]# echo 010000 > /sys/module/e1000/parameters/copybreak
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]# echo 0100008 > /sys/module/e1000/parameters/copybreak
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]# echo 010000aaaaa > /sys/module/e1000/parameters/copybreak
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]#
After applying this patch:
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]# echo 0x1000 > /sys/module/e1000/parameters/copybreak
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]# echo 0x1000g > /sys/module/e1000/parameters/copybreak
-bash: echo: write error: Invalid argument
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]# echo 0x1000gggggggg > /sys/module/e1000/parameters/copybreak
-bash: echo: write error: Invalid argument
[root@yangyi-dev /]# echo 010000 > /sys/module/e1000/parameters/copybreak
[root@yangyi-dev /]# echo 0100008 > /sys/module/e1000/parameters/copybreak
-bash: echo: write error: Invalid argument
[root@yangyi-dev /]# echo 010000aaaaa > /sys/module/e1000/parameters/copybreak
-bash: echo: write error: Invalid argument
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]# echo -n 4096 > /sys/module/e1000/parameters/copybreak
[root@yangyi-dev /]# cat /sys/module/e1000/parameters/copybreak
4096
[root@yangyi-dev /]#
[akpm@linux-foundation.org: fix compiler warnings]
[akpm@linux-foundation.org: fix off-by-one found by tiwai@suse.de]
Signed-off-by: Yi Yang <yi.y.yang@intel.com>
Cc: Greg KH <greg@kroah.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since this header is exported to userspace and all the other types in the
header have been scrubbed, this brings the last straggler in line.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove the arbitrary 128 device limit for NBD. nbds_max can now be set to
any number. In certain scenarios where devices are used sparsely we have
run into the 128 device limit.
Signed-off-by: Paul Clements <paul.clements@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a new s_options field to struct super_block. Filesystems can save
mount options passed to them in mount or remount. It is automatically
freed when the superblock is destroyed.
A new helper function, generic_show_options() is introduced, which uses
this field to display the mount options in /proc/mounts.
Another helper function, save_mount_options() may be used by
filesystems to save the options in the super block.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Per previous discussions about cleaning up ufs_fs.h, people just want
this straight up dropped from userspace export. The only remaining
consumer (silo) has been fixed a while ago to not rely on this header.
This allows use to move it completely from include/linux/ to fs/ufs/
seeing as how the only in-kernel consumer is fs/ufs/.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Jan Kara <jack@ucw.cz>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the conversion factor between jiffies and milli- or microseconds is
not a single multiply or divide, as for the case of HZ == 300, we currently
do a multiply followed by a divide. The intervening result, however, is
subject to overflows, especially since the fraction is not simplified (for
HZ == 300, we multiply by 300 and divide by 1000).
This is exposed to the user when passing a large timeout to poll(), for
example.
This patch replaces the multiply-divide with a reciprocal multiplication on
32-bit platforms. When the input is an unsigned long, there is no portable
way to do this on 64-bit platforms there is no portable way to do this
since it requires a 128-bit intermediate result (which gcc does support on
64-bit platforms but may generate libgcc calls, e.g. on 64-bit s390), but
since the output is a 32-bit integer in the cases affected, just simplify
the multiply-divide (*3/10 instead of *300/1000).
The reciprocal multiply used can have off-by-one errors in the upper half
of the valid output range. This could be avoided at the expense of having
to deal with a potential 65-bit intermediate result. Since the intent is
to avoid overflow problems and most of the other time conversions are only
semiexact, the off-by-one errors were considered an acceptable tradeoff.
At Ralf Baechle's suggestion, this version uses a Perl script to compute
the necessary constants. We already have dependencies on Perl for kernel
compiles. This does, however, require the Perl module Math::BigInt, which
is included in the standard Perl distribution starting with version 5.8.0.
In order to support older versions of Perl, include a table of canned
constants in the script itself, and structure the script so that
Math::BigInt isn't required if pulling values from said table.
Running the script requires that the HZ value is available from the
Makefile. Thus, this patch also adds the Kconfig variable CONFIG_HZ to the
architectures which didn't already have it (alpha, cris, frv, h8300, m32r,
m68k, m68knommu, sparc, v850, and xtensa.) It does *not* touch the sh or
sh64 architectures, since Paul Mundt has dealt with those separately in the
sh tree.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Ralf Baechle <ralf@linux-mips.org>,
Cc: Sam Ravnborg <sam@ravnborg.org>,
Cc: Paul Mundt <lethal@linux-sh.org>,
Cc: Richard Henderson <rth@twiddle.net>,
Cc: Michael Starvik <starvik@axis.com>,
Cc: David Howells <dhowells@redhat.com>,
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>,
Cc: Hirokazu Takata <takata@linux-m32r.org>,
Cc: Geert Uytterhoeven <geert@linux-m68k.org>,
Cc: Roman Zippel <zippel@linux-m68k.org>,
Cc: William L. Irwin <sparclinux@vger.kernel.org>,
Cc: Chris Zankel <chris@zankel.net>,
Cc: H. Peter Anvin <hpa@zytor.com>,
Cc: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Makes an embedded image a bit smaller.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
do_generic_mapping_read was used by gfs2 for internals reads, but this use
of the interface was rather suboptimal (as was the whole interface) and has
been replaced by an internal helper now. This patch kills
do_generic_mapping_read and surrounding damage in preparation of additional
cleanups for the buffered read path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All of the asm-*/types.h headers have been updated to no longer check
__STRICT_ANSI__ for the 64bit types, so this brings linux/types.h in line.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
PWM device setup, and a simple PWM driver exposing a programming interface
giving access to each channel's full capabilities. Note that this doesn't
support starting several channels in synch.
[hskinnemoen@atmel.com: allocate platform device dynamically]
[hskinnemoen@atmel.com: Kconfig fix]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
delayed_work_timer_fn() is a timer function, make it static.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
From version 2.6 of the SMBIOS standard, type 10 (On Board Devices
Information) becomes obsolete. The reason for this is that no further
fields can be added to this structure without adversely affecting existing
software's ability to properly parse the data.
Therefore type 41 (Onboard Devices Extended Information) was added.
The structure is as follows:
struct smbios_type_41 {
u8 type;
u8 length;
u16 handle;
u8 reference_designation_string;
u8 device_type; /* same device type as in type 10 */
u8 device_type_instance;
u16 segment_group_number;
u8 bus_number;
u8 device_function_number;
};
For more info: http://www.dmtf.org/standards/smbios
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Printing date and version of a driver makes sense if there's a maintainer
who's maintaining and using these, but printing ancient version information
only confuses users.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
udf_debug should be enclosed with do { } while (0)
to be safely used in code like below:
if (something)
udf_debug();
else
anything;
(Otherwise compiler will not compile it with:
"error: expected expression before 'else'")
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
simple_attr_close implementes ->release so it should be named accordingly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: <stefano.brivio@polimi.it>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg KH <greg@kroah.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sometimes simple attributes might need to return an error, e.g. for
acquiring a mutex interruptibly. In fact we have that situation in
spufs already which is the original user of the simple attributes. This
patch merged the temporarily forked attributes in spufs back into the
main ones and allows to return errors.
[akpm@linux-foundation.org: build fix]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: <stefano.brivio@polimi.it>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg KH <greg@kroah.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some arches (like alpha and ia64) already have a clean posix_types.h header.
This brings all the others in line by removing all references to __GLIBC__
(and some undocumented __USE_ALL).
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patchset moves le*_add_cpu and be*_add_cpu functions from OCFS2 to core
header (1st), converts ext3 filesystem to this API (2nd) and replaces XFS
different named functions with new ones (3rd).
There are many places where these functions will be useful. Just look at:
grep -r 'cpu_to_[ble12346]*([ble12346]*_to_cpu.*[-+]' linux-src/ Patch for
ext3 is an example how conversions will probably look like.
This patch:
- move inline functions which add native byte order variable to
little/big endian variable to core header
* le16_add_cpu(__le16 *var, u16 val)
* le32_add_cpu(__le32 *var, u32 val)
* le64_add_cpu(__le64 *var, u64 val)
* be32_add_cpu(__be32 *var, u32 val)
- add for completeness:
* be16_add_cpu(__be16 *var, u16 val)
* be64_add_cpu(__be64 *var, u64 val)
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: Mark Fasheh <mark.fasheh@oracle.com>
Cc: David Chinner <dgc@sgi.com>
Cc: Timothy Shimmin <tes@sgi.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add architecture support for the MN10300/AM33 CPUs produced by MEI to the
kernel.
This patch also adds board support for the ASB2303 with the ASB2308 daughter
board, and the ASB2305. The only processor supported is the MN103E010, which
is an AM33v2 core plus on-chip devices.
[akpm@linux-foundation.org: nuke cvs control strings]
Signed-off-by: Masakazu Urade <urade.masakazu@jp.panasonic.com>
Signed-off-by: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allocate serial port UART type IDs for the MN10300 on-chip serial ports.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Suppress A.OUT library support if CONFIG_ARCH_SUPPORTS_AOUT is not set.
Not all architectures support the A.OUT binfmt, so the ELF binfmt should not
be permitted to go looking for A.OUT libraries to load in such a case. Not
only that, but under such conditions A.OUT core dumps are not produced either.
To make this work, this patch also does the following:
(1) Makes the existence of the contents of linux/a.out.h contingent on
CONFIG_ARCH_SUPPORTS_AOUT.
(2) Renames dump_thread() to aout_dump_thread() as it's only called by A.OUT
core dumping code.
(3) Moves aout_dump_thread() into asm/a.out-core.h and makes it inline. This
is then included only where needed. This means that this bit of arch
code will be stored in the appropriate A.OUT binfmt module rather than
the core kernel.
(4) Drops A.OUT support for Blackfin (according to Mike Frysinger it's not
needed) and FRV.
This patch depends on the previous patch to move STACK_TOP[_MAX] out of
asm/a.out.h and into asm/processor.h as they're required whether or not A.OUT
format is available.
[jdike@addtoit.com: uml: re-remove accidentally restored code]
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move STACK_TOP[_MAX] out of asm/a.out.h and into asm/processor.h as they're
required whether or not A.OUT format is available.
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix typo in comments.
BTW: I have to fix coding style in arch/ia64/kernel/time.c also, otherwise
checkpatch.pl will be complaining.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Function timekeeping_is_continuous() no longer checks flag
CLOCK_IS_CONTINUOUS, and it checks CLOCK_SOURCE_VALID_FOR_HRES now. So rename
the function accordingly.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There's only one caller left - the kill_pgrp one - so merge these two
functions and forget the kill_pgrp_info one.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Reviewed-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
signal_struct->tsk points to the ->group_leader and thus we have the nasty
code in de_thread() which has to change it and restart ->real_timer if the
leader is changed.
Use "struct pid *leader_pid" instead. This also allows us to kill now
unneeded send_group_sig_info().
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is a window when de_thread() switches the leader and drops
tasklist_lock. In that window do_each_pid_task(PIDTYPE_PID) finds both new
and old leaders.
The problem is pretty much theoretical and probably can be ignored. Currently
the only users of do_each_pid_task(PIDTYPE_PID) are send_sigio/send_sigurg, so
they can send the signal to the same process twice.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
pid_vnr returns the user space pid with respect to the pid namespace the
struct pid was allocated in. What we want before we return a pid to user
space is the user space pid with respect to the pid namespace of current.
pid_vnr is a very nice optimization but because it isn't quite what we want
it is easy to use pid_vnr at times when we aren't certain the struct pid
was allocated in our pid namespace.
Currently this describes at least tiocgpgrp and tiocgsid in ttyio.c the
parent process reported in the core dumps and the parent process in
get_signal_to_deliver.
So unless the performance impact is huge having an interface that does what
we want instead of always what we want should be much more reliable and
much less error prone.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
do_signal_stop() counts all sub-thread and sets ->group_stop_count
accordingly. Every thread should decrement ->group_stop_count and stop,
the last one should notify the parent.
However a sub-thread can exit before it notices the signal_pending(), or it
may be somewhere in do_exit() already. In that case the group stop never
finishes properly.
Note: this is a minimal fix, we can add some optimizations later. Say we
can return quickly if thread_group_empty(). Also, we can move some signal
related code from exit_notify() to exit_signals().
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change set_special_pids() to work with struct pid, not pid_t from global name
space. This again speedups and imho cleanups the code, also a preparation for
the next patch.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since the patch
"Fix ptrace_attach()/ptrace_traceme()/de_thread() race"
commit f5b40e363a
we set PT_ATTACHED and change child->parent "atomically" wrt task_list lock.
This means we can remove the checks like "PT_ATTACHED && ->parent != ptracer"
which were needed to catch the "ptrace attach is in progress" case. We can
also remove the flag itself since nobody else uses it.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sem_exit_ns(), msg_exit_ns() and shm_exit_ns() are all called when an
ipc_namespace is released to free all ipcs of each type. But in fact, they
do the same thing: they loop around all ipcs to free them individually by
calling a specific routine.
This patch proposes to consolidate this by introducing a common function,
free_ipcs(), that do the job. The specific routine to call on each
individual ipcs is passed as parameter. For this, these ipc-specific
'free' routines are reworked to take a generic 'struct ipc_perm' as
parameter.
Signed-off-by: Pierre Peiffer <pierre.peiffer@bull.net>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Each ipc_namespace contains a table of 3 pointers to struct ipc_ids (3 for
msg, sem and shm, structure used to store all ipcs) These 'struct ipc_ids'
are dynamically allocated for each icp_namespace as the ipc_namespace
itself (for the init namespace, they are initialized with pointers to
static variables instead)
It is so for historical reason: in fact, before the use of idr to store the
ipcs, the ipcs were stored in tables of variable length, depending of the
maximum number of ipc allowed. Now, these 'struct ipc_ids' have a fixed
size. As they are allocated in any cases for each new ipc_namespace, there
is no gain of memory in having them allocated separately of the struct
ipc_namespace.
This patch proposes to make this table static in the struct ipc_namespace.
Thus, we can allocate all in once and get rid of all the code needed to
allocate and free these ipc_ids separately.
Signed-off-by: Pierre Peiffer <pierre.peiffer@bull.net>
Acked-by: Cedric Le Goater <clg@fr.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Give architectures that support the new termios2 the possibilty to overide the
user_termios_to_kernel_termios and kernel_termios_to_user_termios macros. As
soon as all architectures that use the generic variant have been converted the
ifdefs can go away again. Architectures in question are avr32, frv, powerpc
and s390.
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix an off by one bug in the fault reason string reporting function, and
clean up some of the code around this buglet.
[akpm@linux-foundation.org: cleanup]
Signed-off-by: mark gross <mgross@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Typical PDE creation code looks like:
pde = create_proc_entry("foo", 0, NULL);
if (pde)
pde->proc_fops = &foo_proc_fops;
Notice that PDE is first created, only then ->proc_fops is set up to
final value. This is a problem because right after creation
a) PDE is fully visible in /proc , and
b) ->proc_fops are proc_file_operations which do not have ->open callback. So, it's
possible to ->read without ->open (see one class of oopses below).
The fix is new API called proc_create() which makes sure ->proc_fops are
set up before gluing PDE to main tree. Typical new code looks like:
pde = proc_create("foo", 0, NULL, &foo_proc_fops);
if (!pde)
return -ENOMEM;
Fix most networking users for a start.
In the long run, create_proc_entry() for regular files will go.
BUG: unable to handle kernel NULL pointer dereference at virtual address 00000024
printing eip: c1188c1b *pdpt = 000000002929e001 *pde = 0000000000000000
Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC
last sysfs file: /sys/block/sda/sda1/dev
Modules linked in: foo af_packet ipv6 cpufreq_ondemand loop serio_raw psmouse k8temp hwmon sr_mod cdrom
Pid: 24679, comm: cat Not tainted (2.6.24-rc3-mm1 #2)
EIP: 0060:[<c1188c1b>] EFLAGS: 00210002 CPU: 0
EIP is at mutex_lock_nested+0x75/0x25d
EAX: 000006fe EBX: fffffffb ECX: 00001000 EDX: e9340570
ESI: 00000020 EDI: 00200246 EBP: e9340570 ESP: e8ea1ef8
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process cat (pid: 24679, ti=E8EA1000 task=E9340570 task.ti=E8EA1000)
Stack: 00000000 c106f7ce e8ee05b4 00000000 00000001 458003d0 f6fb6f20 fffffffb
00000000 c106f7aa 00001000 c106f7ce 08ae9000 f6db53f0 00000020 00200246
00000000 00000002 00000000 00200246 00200246 e8ee05a0 fffffffb e8ee0550
Call Trace:
[<c106f7ce>] seq_read+0x24/0x28a
[<c106f7aa>] seq_read+0x0/0x28a
[<c106f7ce>] seq_read+0x24/0x28a
[<c106f7aa>] seq_read+0x0/0x28a
[<c10818b8>] proc_reg_read+0x60/0x73
[<c1081858>] proc_reg_read+0x0/0x73
[<c105a34f>] vfs_read+0x6c/0x8b
[<c105a6f3>] sys_read+0x3c/0x63
[<c10025f2>] sysenter_past_esp+0x5f/0xa5
[<c10697a7>] destroy_inode+0x24/0x33
=======================
INFO: lockdep is turned off.
Code: 75 21 68 e1 1a 19 c1 68 87 00 00 00 68 b8 e8 1f c1 68 25 73 1f c1 e8 84 06 e9 ff e8 52 b8 e7 ff 83 c4 10 9c 5f fa e8 28 89 ea ff <f0> fe 4e 04 79 0a f3 90 80 7e 04 00 7e f8 eb f0 39 76 34 74 33
EIP: [<c1188c1b>] mutex_lock_nested+0x75/0x25d SS:ESP 0068:e8ea1ef8
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently we possibly lookup the pid in the wrong pid namespace. So
seq_file convert proc_pid_status which ensures the proper pid namespaces is
passed in.
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: another build fix]
[akpm@linux-foundation.org: s390 build fix]
[akpm@linux-foundation.org: fix task_name() output]
[akpm@linux-foundation.org: fix nommu build]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Andrew Morgan <morgan@kernel.org>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently many /proc/pid files use a crufty precursor to the current seq_file
api, and they don't have direct access to the pid_namespace or the pid of for
which they are displaying data.
So implement proc_single_file_operations to make the seq_file routines easy to
use, and to give access to the full state of the pid of we are displaying data
for.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Just like with the user namespaces, move the namespace management code into
the separate .c file and mark the (already existing) PID_NS option as "depend
on NAMESPACES"
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Kirill Korotaev <dev@sw.ru>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
