Commit graph

1325 commits

Author SHA1 Message Date
Rafael J. Wysocki
7731ce63d9 ACPI PM: Restore the 2.6.24 suspend ordering
Some time ago it turned out that our suspend code ordering broke some
NVidia-based systems that hung if _PTS was executed with one of the PCI
devices, specifically a USB controller, in a low power state.

Then, it was noticed that the suspend code ordering was not compliant
with ACPI 1.0, although it was compliant with ACPI 2.0 (and later), and
it was argued that the code had to be changed for that reason (ref.
http://bugzilla.kernel.org/show_bug.cgi?id=9528).

So we did, but evidently we did wrong, because it's now turning out that
some systems have been broken by this change. Refs:
	http://bugzilla.kernel.org/show_bug.cgi?id=10340
	https://bugzilla.novell.com/show_bug.cgi?id=374217#c16

[ I said at that time that something like this might happend, but the
  majority of people involved thought that it was improbable due to the
  necessity to preserve the compliance of hardware with ACPI 1.0. ]

This actually is a quite serious regression from 2.6.24.

Moreover, the ACPI 1.0 ordering of suspend code introduced another issue
that I have only noticed recently.  Namely, if the suspend of one of
devices fails, the already suspended devices will be resumed without
executing _WAK before, which leads to problems on some systems (for
example, in such situations thermal management is broken on my HP
nx6325).  Consequently, it also breaks suspend debugging on the affected
systems.

Note also, that the requirement to execute _PTS before suspending
devices does not really make sense, because the device in question may
be put into a low power state at run time for a reason unrelated to a
system-wide suspend.

For the reasons outlined above, the change of the suspend ordering
should be reverted, which is done by the patch below.

[ Felix Möller: "I am the reporter from the original Novell Bug:

	https://bugzilla.novell.com/show_bug.cgi?id=374217

  I just tried current git head (two hours ago) with the patch (the one
  from the beginning of this thread) from Rafael and without it.  With
  the patch my MacBook does suspend without it does not." ]

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Felix Möller <felix@derklecks.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-01 11:21:08 -07:00
Ingo Molnar
48d3d8263c revert "ACPI: drivers/acpi: elide a non-zero test on a result that is never 0"
Revert commit 1192aeb957 ("ACPI:
drivers/acpi: elide a non-zero test on a result that is never 0")
because it turns out that thermal_cooling_device_register() does
actually return NULL if CONFIG_THERMAL is turned off (then the routine
turns into a dummy inline routine in the header files that returns NULL
unconditionally).

This was found with randconfig testing, causing a crash during bootup:

  initcall 0x78878534 ran for 13 msecs: acpi_button_init+0x0/0x51()
  Calling initcall 0x78878585: acpi_fan_init+0x0/0x2c()
  BUG: unable to handle kernel NULL pointer dereference at 00000000
  IP: [<782b8ad0>] acpi_fan_add+0x7d/0xfd
  *pde = 00000000
  Oops: 0000 [#1]
  Modules linked in:

  Pid: 1, comm: swapper Not tainted (2.6.25-rc7-sched-devel.git-x86-latest.git #14)
  EIP: 0060:[<782b8ad0>] EFLAGS: 00010246 CPU: 0
  EIP is at acpi_fan_add+0x7d/0xfd
  EAX: b787c718 EBX: b787c400 ECX: b782ceb4 EDX: 00000007
  ESI: 00000000 EDI: b787c6f4 EBP: b782cee0 ESP: b782cecc
   DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
  Process swapper (pid: 1, ti=b782c000 task=b7846000 task.ti=b782c000)
  Stack: b787c459 00000000 b787c400 78790888 b787c60c b782cef8 782b6fb8 ffffffda
         b787c60c 00000000 78790958 b782cf0c 783005d7 b787c60c 78790958 78790584
         b782cf1c 783007f6 b782cf28 00000000 b782cf40 782ffc4a 78790958 b794d558
  Call Trace:
   [<782b6fb8>] ? acpi_device_probe+0x3e/0xdb
   [<783005d7>] ? driver_probe_device+0x82/0xfc
   [<783007f6>] ? __driver_attach+0x3a/0x70
   [<782ffc4a>] ? bus_for_each_dev+0x3e/0x60
   [<7830048c>] ? driver_attach+0x14/0x16
   [<783007bc>] ? __driver_attach+0x0/0x70
   [<7830006a>] ? bus_add_driver+0x9d/0x1b0
   [<783008c3>] ? driver_register+0x47/0xa3
   [<7813db00>] ? timespec_to_ktime+0x9/0xc
   [<782b7331>] ? acpi_bus_register_driver+0x3a/0x3c
   [<78878592>] ? acpi_fan_init+0xd/0x2c
   [<78863656>] ? kernel_init+0xac/0x1f9
   [<788635aa>] ? kernel_init+0x0/0x1f9
   [<78114563>] ? kernel_thread_helper+0x7/0x10
   =======================
  Code: 6e 78 e8 57 44 e7 ff 58 e9 93 00 00 00 8b 55 f0 8d bb f4 02 00 00 80 4b 2d 10 8b 03 e8 87 cb ff ff 8d 83 18 03 00 00 80 63 2d ef <ff> 35 00 00 00 00 50 68 e8 9c 6e 78 e8 22 44 e7 ff b9 b6 9c 6e
  EIP: [<782b8ad0>] acpi_fan_add+0x7d/0xfd SS:ESP 0068:b782cecc
  ---[ end trace 778e504de7e3b1e3 ]---
  Kernel panic - not syncing: Attempted to kill init!

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-28 10:16:53 -07:00
Julia Lawall
1192aeb957 ACPI: drivers/acpi: elide a non-zero test on a result that is never 0
The function thermal_cooling_device_register always returns either a valid
pointer or a value made with ERR_PTR, so a test for non-zero on the result
will always succeed.

The problem was found using the following semantic match.
(http://www.emn.fr/x-info/coccinelle/)

//<smpl>
@a@
expression E, E1;
statement S,S1;
position p;
@@

E = thermal_cooling_device_register(...)
... when != E = E1
if@p (E) S else S1

@n@
position a.p;
expression E,E1;
statement S,S1;
@@

E = NULL
... when != E = E1
if@p (E) S else S1

@depends on !n@
expression E;
statement S,S1;
position a.p;
@@

* if@p (E)
  S else S1
//</smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-27 01:48:22 -04:00
Len Brown
86d9fc1293 Merge branches 'release', 'idle', 'redhat-bugzilla-436589', 'sbs' and 'video' into release 2008-03-26 22:50:09 -04:00
Venki Pallipadi
8e92b6605d cpuidle: fix 100% C0 statistics regression
commit 9b12e18cdc
'ACPI: cpuidle: Support C1 idle time accounting'
was implicated in a 100% C0 idle regression.
http://bugzilla.kernel.org/show_bug.cgi?id=10076

It pointed out a potential problem where the menu governor
may get confused by the C-state residency time from poll
idle or C1 idle, where this timing info is not accurate.
This inaccuracy is due to interrupts being handled
before we account for C-state exit.

Do not mark TIME_VALID for CO poll state.
Mark C1 time as valid only with the MWAIT (CSTATE_FFH) entry method.

This makes governors use the timing information only when it is correct and
eliminates any wrong policy decisions that may result from invalid timing
information.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-26 00:58:19 -04:00
Venki Pallipadi
996520c1fd ACPI: fix mis-merge -- invoke acpi_unlazy_tlb() only on C3 entry
This original patch
http://ussg.iu.edu/hypermail/linux/kernel/0712.2/1451.html
was intending to add acpi_unlazy_tlb() to acpi_idle_enter_bm(),
which is used for C3 entry.

But it was merged incorrectly as commmit

bde6f5f59c
'x86: voluntary leave_mm before entering ACPI C3'

so the call was instead added to acpi_idle_enter_simple()
(which is C2 entry routine), probably due to identical
context in that function.

Move the call back to acpi_idle_enter_bm().

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-26 00:40:41 -04:00
Zhang Rui
5c9fcb5dee ACPI: fix a regression of ACPI device driver autoloading
commit 3620f2f2f3 sets the cid of
ACPI video/dock/bay device and leaves the hid empty.
As a result, "modalias" should export the cid for
devices which don't have a hid.

ACPI Video driver is not autoloaded with
commit 3620f2f2f3 applied.
"cat /sys/.../device:03(acpi video bus)/modalias" shows nothing.

ACPI Video driver is autoloaded after revert that commit.
"cat /sys/.../LNXVIDEO:0x/modalias" shows "acpi:LNXVIDEO:"

ACPI Video driver is autoloaded with commit
3620f2f2f3 and this patch applied.
"cat /sys/.../device:03(acpi video bus)/modalias"
shows "acpi:LNXVIDEO:"

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-25 22:48:37 -04:00
Bjorn Helgaas
b97d480340 ACPI: fix Medion _PRT quirk (use "ISA_", not "ISA")
This fixes the builtin RTL8139 NIC on the Medion MD9580-F laptop.  The
BIOS reports the interrupt routing incorrectly.  I recently added a
quirk to work around this, and this patch fixes a typo in the quirk.

We pad every ACPI pathname component to four characters, so ".ISA." will
never match anything.  We need ".ISA_." instead.

Thank you Johann-Nikolaus Andreae <johann-nikolaus.andreae@nacs.de>
for patiently testing this patch.

See http://bugzilla.kernel.org/show_bug.cgi?id=4773

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-25 15:21:30 -07:00
Alexey Starikovskiy
d7a0e1f564 Revert "ACPI: EC: Handle IRQ storm on Acer laptops"
This reverts commit 2c81ce4c9c.

It caused several new troubles (eg suspend slowdown bisected down to
this patch by Pavel Machek), so just revert it for now.

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Cc: Pavel Machek <pavel@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-18 21:32:24 -07:00
Len Brown
13d93924f1 Merge branches 'release' and 'dock' into release 2008-03-18 05:17:15 -04:00
Holger Macht
9171f83488 ACPI: Set flag DOCK_UNDOCKING when triggered via sysfs
begin_undock() is only called when triggered via a acpi notify handler
(pressing the undock button on the dock station), but complete_undock() is
always called after the eject. So if a undock is triggered through a sysfs
write, the flag DOCK_UNDOCKING has to be set for the dock station,
too. Otherwise this will freeze the system hard.

Signed-off-by: Holger Macht <hmacht@suse.de>
Acked-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-18 05:16:38 -04:00
Alexey Starikovskiy
7642d21130 ACPI: SBS: remove typo from sbchc.c
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-18 05:13:14 -04:00
Len Brown
d9ea1364d3 Merge branches 'release', 'asus', 'bugzilla-8573', 'bugzilla-9995', 'bugzilla-10272', 'lockdep' and 'thermal' into release 2008-03-18 04:52:57 -04:00
Len Brown
77321e624b Revert "ACPI: video: Ignore devices that aren't present in hardware"
This reverts commit 0119509c4f.

http://bugzilla.kernel.org/show_bug.cgi?id=9995

Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-18 04:04:35 -04:00
Julia Lawall
abc5a87f4e asus_acpi: remove misleading mask
led_out is boolean, so there is no functional change here,
but apparently an extra mask with 1 caused some style checkers
to flag this as logic bug.

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-18 02:31:34 -04:00
Len Brown
f0d6752c9f Revert "ACPI: video: Ignore ACPI video devices that aren't present in hardware"
This reverts commit 3fa2cdcc45.

http://bugzilla.kernel.org/show_bug.cgi?id=9995

Signed-off-by: Len Brown <len.brown>
2008-03-18 01:43:53 -04:00
Alexey Starikovskiy
b8a1bdb149 ACPI: battery: Don't return -EFAIL on broken packages.
Acer BIOS has a bug which is exposed when a dead battery is present.

The package template that is used to describe battery status is
over-written with sane values when the battery is live.
But when the batter is dead, a bogus reference in the template
is used.  In this case, Linux returns a fault, when instead
it should simply return that it doesn't know the missing value.

http://bugzilla.kernel.org/show_bug.cgi?id=8573
http://bugzilla.kernel.org/show_bug.cgi?id=10202

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-17 22:37:42 -04:00
Linus Torvalds
9a9e0d6855 ACPI: Remove ACPI_CUSTOM_DSDT_INITRD option
This essentially reverts commit 71fc47a9ad
("ACPI: basic initramfs DSDT override support"), because the code simply
isn't ready.

It did ugly things to the init sequence to populate the rootfs image
early, but that just ended up showing other problems with the whole
approach.  The fact is, the VFS layer simply isn't initialized this
early, and the relevant ACPI code should either run much later, or this
shouldn't be done at all.

For 2.6.25, we'll just pick the latter option.  We can revisit this
concept later if necessary.

Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Tilman Schmidt <tilman@imap.cc>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Cc: Len Brown <len.brown@intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Markus Gaugusch <dsdt@gaugusch.at>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-15 11:58:04 -07:00
Venki Pallipadi
71e93d1561 ACPI: lockdep warning on boot, 2.6.25-rc5
This avoids the harmless WARNING by lockdep in acpi_processor_idle().

The reason for WARNING is because at the depth of idle handling code,
some of the idle handlers disable interrupts, some times, while returning from
the idle handler. After return, acpi_processor_idle and few other routines
in the file did an unconditional local_irq_enable(). With LOCKDEP, enabling
irq when it is already enabled generates the below WARNING.

> > [    0.593038] ------------[ cut here ]------------
> > [    0.593267] WARNING: at kernel/lockdep.c:2035 trace_hardirqs_on+0xa0/0x115()
> > [    0.593596] Modules linked in:
> > [    0.593756] Pid: 0, comm: swapper Not tainted 2.6.25-rc5 #8
> > [    0.594017]
> > [    0.594017] Call Trace:
> > [    0.594216]  [<ffffffff80231663>] warn_on_slowpath+0x58/0x6b
> > [    0.594495]  [<ffffffff80495966>] ? _spin_unlock_irqrestore+0x38/0x47
> > [    0.594809]  [<ffffffff80329a86>] ? acpi_os_release_lock+0x9/0xb
> > [    0.595103]  [<ffffffff80337840>] ? acpi_set_register+0x161/0x173
> > [    0.595401]  [<ffffffff8034c8d4>] ? acpi_processor_idle+0x1de/0x546
> > [    0.595706]  [<ffffffff8020a23b>] ? default_idle+0x0/0x73
> > [    0.595970]  [<ffffffff8024fc0e>] trace_hardirqs_on+0xa0/0x115
> > [    0.596049]  [<ffffffff8034c6f6>] ? acpi_processor_idle+0x0/0x546
> > [    0.596346]  [<ffffffff8034c8d4>] acpi_processor_idle+0x1de/0x546
> > [    0.596642]  [<ffffffff8020a23b>] ? default_idle+0x0/0x73
> > [    0.596912]  [<ffffffff8034c6f6>] ? acpi_processor_idle+0x0/0x546
> > [    0.597209]  [<ffffffff8020a23b>] ? default_idle+0x0/0x73
> > [    0.597472]  [<ffffffff8020a355>] cpu_idle+0xa7/0xd1
> > [    0.597717]  [<ffffffff80485fa1>] rest_init+0x55/0x57
> > [    0.597957]  [<ffffffff8062fb49>] start_kernel+0x29d/0x2a8
> > [    0.598215]  [<ffffffff8062f1da>] _sinittext+0x1da/0x1e1
> > [    0.598464]
> > [    0.598546] ---[ end trace 778e504de7e3b1e3 ]---

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-14 00:05:48 -04:00
Len Brown
b4de123a0b Merge branches 'release', 'ejd', 'sony' and 'wmi' into release 2008-03-13 01:59:52 -04:00
Len Brown
c523aef0f7 Merge branches 'release', 'button-sysfs', 'misc', 'mismatch', 'randconfig' and 'toshiba' into release 2008-03-13 01:59:49 -04:00
Len Brown
160ff06b18 Merge branches 'release' and 'thermal' into release 2008-03-13 01:59:46 -04:00
Len Brown
1ca721cdb7 Merge branches 'release', 'bugzilla-8570', 'bugzilla-9966', 'bugzilla-9998', 'bugzilla-10100', 'bugzilla-10132', 'bugzilla-10138' and 'bugzilla-10206' into release 2008-03-13 01:59:45 -04:00
Zhang, Rui
5e012760df ACPI: thermal: show temperature in millidegree Celsius
as now required by the generic thermal I/F

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-13 01:49:11 -04:00
Johann Felix Soden
c8dc9de109 ACPI: buffer array too short in drivers/acpi/system.c
Since "ff_gbl_lock" has a length of 11 chars and is copied with sprintf
to char buffer[10], there is a problem. We need char buffer[12] because
of the closing zero byte.

Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-12 17:57:22 -04:00
Thomas Renninger
b6a1638759 ACPICA: Warn if packages with invalid references are evaluated
And return an error to avoid NULL pointer access by the caller
Lin Ming's patch avoids corrupted mem access when
BIOS has invalid references included, the handle is now zero
instead of corrupted.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-11 23:57:20 -04:00
Bjorn Helgaas
391df5dce3 ACPI: add _PRT quirks to work around broken firmware
This patch works around incorrect _PRT (PCI interrupt routing)
information from firmware.  This does not fix any regressions
and can wait for the next kernel release.

On the Medion MD9580-F laptop, the BIOS says the builtin RTL8139
NIC interrupt at 00:09.0[A] is connected to \_SB.PCI0.ISA.LNKA, but
it's really connected to \_SB.PCI0.ISA.LNKB.  Before this patch,
the workaround was to use "pci=routeirq".  More details at
http://bugzilla.kernel.org/show_bug.cgi?id=4773.

On the Dell OptiPlex GX1, the BIOS says the PCI slot interrupt
00:0d[A] is connected to LNKB, but it's really connected to LNKA.
Before this patch, the workaround was to use "pci=routeirq".
Pierre Ossman tested a previous version of this patch and confirmed
that it fixed the problem.  More details at
http://bugzilla.kernel.org/show_bug.cgi?id=5044.

On the HP t5710 thin client, the BIOS says the builtin Radeon
video interrupt at 01:00[A] is connected to LNK1, but it's really
connected to LNK3.  The previous workaround was to use a custom
DSDT.  I tested this patch and verified that it fixes the problem.
More details at http://bugzilla.kernel.org/show_bug.cgi?id=10138.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-11 23:41:08 -04:00
Zhao Yakui
7c0ea45be4 ACPI: Ignore _BQC object when registering backlight device
According to acpi spec , the objects of  _BCL and _BCM are required if
integrated LCD is present and supports brightness level .The _BQC is
the optional object. So the _BQC object is ignored when the backlight device
is registered in ACPI video driver.

http://bugzilla.kernel.org/show_bug.cgi?id=10206

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Zhang Rui  <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-11 22:20:19 -04:00
Carlos Corbacho
a527f2d7fe ACPI: WMI: Clean up handling of spec violating data blocks
Acer violate the ACPI-WMI spec by declaring some of their data blocks as
expensive, but with no corresponding WCxx method. There is already some
workaround code in to handle the initial WCxx call (we just ignore a
failure here); but we need to properly check if the second, "clean up",
WCxx call is actually needed or not, rather than fail simply because it
isn't there.

Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-11 17:59:05 -04:00
Glauber Costa
d6f882e104 ACPI: use ACPI_DEBUG_PRINT instead of printk in acpi_processor_hotplug_notify()
For consistency, use ACPI_DEBUG_PRINT instead of printk in
acpi_processor_hotplug_notify() for BUS_CHECK and DEVICE_CHECK events

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-11 13:40:43 -04:00
Andrey Borzenkov
3b34e5232f ACPI: button: make real parent for input devices in device tree
Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-11 13:38:49 -04:00
arvidjaar@mail.ru
4db42c51ce toshiba_acpi: Enable autoloading
This adds aliases to enable autoloading of toishiba_acpi.  Two aliases are
defined - TOS6200 (for \\_SB_.VALD.GHCI) and TSO1900 (for \\_SB_.VALZ.GHCI).
This allows toishiba_acpi to be autoloaded on systems that provide those
devices.

Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru>
Cc: Olivier Blin <blino@mandriva.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-11 13:35:08 -04:00
Alexey Starikovskiy
2c81ce4c9c ACPI: EC: Handle IRQ storm on Acer laptops
On some Acer systems, the HW fails to clear the GPE source,
causing an interrupt storm.

So in EC interrupt mode, we count how many interrupts we
receive when waiting.  If we get more than 5, we give
up on interrupt mode and revert to polling mode.

Also, for polling mode to work on Acers, we need
to insert a delay.

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-11 13:30:00 -04:00
Harvey Harrison
96b2dd1f1f ACPI: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-11 01:58:41 -04:00
Jean Delvare
bd12935f04 ACPI: Fix a duplicate log level
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-11 00:52:19 -04:00
Len Brown
4af8e10a6c Revert "ACPI: EC: Use proper handle for boot EC"
This reverts commit 208c70a456.

http://bugzilla.kernel.org/show_bug.cgi?id=10100

Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-11 00:27:16 -04:00
Lin Ming
c8d16e27a3 ACPI: fix boot oops regression in thermal
Fix a memory overflow bug when copying
NULL internal package element object to external.

http://bugzilla.kernel.org/show_bug.cgi?id=10132

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-11 00:15:19 -04:00
Zhang Rui
d0ce46f550 ACPI Exception (): AE_NOT_FOUND, Processor Device is not present (update)
update cfaf3747ff
ACPI: ACPI Exception (): AE_NOT_FOUND, Processor Device is not present

is_processor_present is only called in the processor hotplug case,
and _STA method is mandatory at this time.

We should ignore those processors that are disabled in the MADT
and don't have _STA methods.
Because they will never exist in this system.
For the processors that don't physically exist but can be
hot plugged later, we still need this debug info.

http://bugzilla.kernel.org/show_bug.cgi?id=8570

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-23 01:53:09 -05:00
Randy Dunlap
7ce9573e09 ACPI: prevent randconfig build failure on empty ACPI_CUSTOM_DSDT_FILE
Make ACPI_CUSTOM_DSDT boolean config symbol a hidden and derived
value, based on the value of ACPI_CUSTOM_DSDT_FILE (string).
Only the latter is presented to the user as a config option.

This fixes problems with "make randconfig" setting ACPI_CUSTOM_DSDT
but leaving ACPI_CUSTOM_DSDT_FILE empty/blank.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-23 00:15:11 -05:00
Holger Macht
3b5fee5952 ACPI: Do not pass NULL to acpi_get_handle() when looking for _EJD
When trying to get the acpi_handle from an acpi_buffer, pass
ACPI_ROOT_OBJECT instead of NULL to acpi_get_handle(). This fixes the
detection of dock dependent bays.

Signed-off-by: Holger Macht <hmacht@suse.de>
Tested-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-21 07:25:47 -05:00
Sam Ravnborg
b5678a3476 ACPI: fix section mismatch in acpi_pci_root_add
Fix following warning:
WARNING: vmlinux.o(.text+0x550e85): Section mismatch in reference from the function acpi_pci_root_add() to the function .devinit.text:pci_acpi_scan_root()

acpi_pci_root_add uses a __devinit annotated function and
it looks like annotating it __devinit too is the correct fix.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-21 02:56:32 -05:00
Sam Ravnborg
b95e9e8d94 ACPI: fix section mismatch in processor_core.c:acpi_processor_hotplug_notify
Fix following warning:
WARNING: vmlinux.o(.text+0x55586c): Section mismatch in reference from the function acpi_processor_hotplug_notify() to the function .cpuinit.text:acpi_processor_start()

acpi_processor_hotplug_notify() may safely reference __cpuinit
stuff as it ids defined inside an ACPI_HOTPLUG_CPU block.
So annotate it __ref to silence the warning.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-21 02:55:26 -05:00
Len Brown
1f1519ef59 Merge branches 'release', 'bugzilla-9916', 'bugzilla-9982', 'bugzilla-9989', 'misc', 'suspend', 'thermal', 'thinkpad' and 'tsc' into release 2008-02-21 02:41:58 -05:00
Ming Lin
1186974f3f ACPI: fix build warning
CC      drivers/acpi/executer/exregion.o
drivers/acpi/executer/exregion.c: In function
‘acpi_ex_pci_config_space_handler’:
drivers/acpi/executer/exregion.c:369: attention : passing argument 3 of
‘acpi_os_read_pci_configuration’ from incompatible pointer type

exposed by 10270d4838

http://bugzilla.kernel.org/show_bug.cgi?id=9989

Signed-off-by: Ming Lin <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-21 02:01:30 -05:00
Pavel Machek
6133116849 ACPI: TSC breaks atkbd suspend
TSC is used even on machines when CONFIG_X86_TSC is not set (X86_TSC
means _require_ TSC), but it is not properly disabled when it is
unusable, because ACPI code understood the config switch as "may use
TSC".

This actually fixes suspend problems on my x60.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-19 20:05:06 -05:00
Glauber Costa
e85ff4b53e ACPI: remove is_processor_present prototype
The function itself is defined just below, so this prototype is not really
useful.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-16 01:01:13 -05:00
Harvey Harrison
4fd7f5188c ACPI: sparse fix, replace macro with static function
replace acpi_util_eval_error macro with static function.

Avoid these sparse warnings due to using buffer within the macro.
drivers/acpi/utils.c:273:3: warning: symbol 'buffer' shadows an earlier one
drivers/acpi/utils.c:259:21: originally declared here
drivers/acpi/utils.c:279:3: warning: symbol 'buffer' shadows an earlier one
drivers/acpi/utils.c:259:21: originally declared here
drivers/acpi/utils.c:368:3: warning: symbol 'buffer' shadows an earlier one
drivers/acpi/utils.c:348:21: originally declared here
drivers/acpi/utils.c:375:3: warning: symbol 'buffer' shadows an earlier one
drivers/acpi/utils.c:348:21: originally declared here
drivers/acpi/utils.c:382:3: warning: symbol 'buffer' shadows an earlier one
drivers/acpi/utils.c:348:21: originally declared here
drivers/acpi/utils.c:402:4: warning: symbol 'buffer' shadows an earlier one
drivers/acpi/utils.c:348:21: originally declared here

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-16 00:40:28 -05:00
Thomas Sujith
43ff39f2f6 ACPI video: check for error from thermal_cooling_device_register
Need to check whether thermal_cooling_device_register
returned ERROR or not.

Signed-off-by: Thomas Sujith <sujith.thomas@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-15 18:29:18 -05:00
Thomas Sujith
d76628c67c ACPI thermal: extract return values using PTR_ERR
Need to extract errors using PTR_ERR macro and
process accordingly.thermal_cooling_device_register
returning NULL means that CONFIG_THERMAL=n and in that
case no need to create symbolic links.

Signed-off-by: Thomas Sujith <sujith.thomas@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-15 18:26:54 -05:00
Zhao Yakui
f28bb45e28 ACPI: thermal: Check whether cooling device exists before unregistering
OS should check whether the cooling device exists before it is unregistered.
If it doesn't exists, it is unnecessary to remove the sysfs link
and call the function of thermal_cooling_device_unregister.

http://bugzilla.kernel.org/show_bug.cgi?id=9982

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Tested-by    : Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-15 18:23:50 -05:00