Commit graph

36819 commits

Author SHA1 Message Date
Mike Frysinger
841a534367 Blackfin: update defconfigs
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:16:01 -04:00
Jie Zhang
41ba653f24 Blackfin: decouple unrelated cache settings to get exact behavior
The current cache options don't really represent the hardware features.
They end up setting different aspects of the hardware so that the end
result is to turn on/off the cache.  Unfortunately, when we hit cache
problems with the hardware, it's difficult to test different settings to
root cause the problem.  The current settings also don't cleanly allow for
different caching behaviors with different regions of memory.

So split the configure options such that they properly reflect the settings
that are applied to the hardware.

Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:15:59 -04:00
Philippe Gerum
7c039a90f0 Blackfin: update I-pipe patch level
Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:15:58 -04:00
Philippe Gerum
5ba3b249c9 Blackfin: remove obsolete mcount support from I-pipe code
Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:15:56 -04:00
Philippe Gerum
a40494a62a Blackfin: allow CONFIG_TICKSOURCE_GPTMR0 with interrupt pipeline
Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:15:54 -04:00
Philippe Gerum
06ecc190f3 Blackfin: convert interrupt pipeline to irqflags
Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:15:53 -04:00
Mike Frysinger
3d15f302d0 Blackfin: allow people to select BF51x-0.1 silicon rev
Now that 0.1 of the BF51x is coming out, allow people to build for it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:15:51 -04:00
Graf Yang
dc2c46bb70 Blackfin: bf526-ezbrd: set SPI flash resources to SST device
The BF526-EZBRD has a SST SPI flash on it, not a ST Micro.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:15:49 -04:00
Sonic Zhang
0de4adfb8c Blackfin: fix accidental reset in some boot modes
We read the SWRST (Software Reset) register to get at the last reset
state, and then we may configure the DOUBLE_FAULT bit to control behavior
when a double fault occurs.  But if the lower bits of the register is
already set (like UART boot mode on a BF54x), we inadvertently make the
system reset by writing to the SYSTEM_RESET field at the same time.  So
make sure the lower 4 bits are always cleared.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:15:48 -04:00
Mike Frysinger
81b79c213d Blackfin: abstract irq14 lowering in do_irq
Split out the optional IRQ14 lowering code to further simplify the
asm_do_IRQ() function and keep the ifdef nest under control.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:15:46 -04:00
Mike Frysinger
6f10fdabdc Blackfin: simplify irq stack overflow checking
Take a page from x86 and abstract the stack checking out of the
asm_do_IRQ() function so that the result is easier to digest.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:15:43 -04:00
Mike Frysinger
46f288a0f9 Blackfin: only build show_interrupts() when procfs is enabled
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:15:42 -04:00
Mike Frysinger
26579216f3 Blackfin: redo handling of bad irqs
With the common IRQ code initializing much more of the irq_desc state, we
can't blindly initialize it ourselves to the local bad_irq state.  If we
do, we end up wrongly clobbering many fields.  So punt most of the bad irq
code as the common layers will handle the default state, and simply call
handle_bad_irq() directly when the IRQ we are processing is invalid.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:15:40 -04:00
Mike Frysinger
a200ad22bb Blackfin: update anomaly lists
Update anomaly headers to match latest released anomaly sheets.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:15:38 -04:00
Mike Frysinger
4d5e6fd42c Blackfin: bf533-ezkit: add resources for FISP devices
The BF533-EZKIT has two Flash In-System Programming devices hooked up to
the async memory bus, so add resources for the primary flashes and the
SRAMs on the devices.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:15:37 -04:00
Mike Frysinger
2780cd6434 Blackfin: bf518f-ezbrd: update DSA resources
The common DSA code changed structure layout, so update the BF518F-EZBRD
resources accordingly.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:15:36 -04:00
Mike Frysinger
e56e03b0cf Blackfin: unify memory region checks between kgdb and traps
The kgdb (in multiple places) and traps code developed pretty much
identical checks for how to access different regions of the Blackfin
memory map, but each wasn't 100%, so unify them to avoid duplication,
bitrot, and bugs with edge cases.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:15:34 -04:00
Linus Torvalds
ac1b7c378e Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (63 commits)
  mtd: OneNAND: Allow setting of boundary information when built as module
  jffs2: leaking jffs2_summary in function jffs2_scan_medium
  mtd: nand: Fix memory leak on txx9ndfmc probe failure.
  mtd: orion_nand: use burst reads with double word accesses
  mtd/nand: s3c6400 support for s3c2410 driver
  [MTD] [NAND] S3C2410: Use DIV_ROUND_UP
  [MTD] [NAND] S3C2410: Deal with unaligned lengths in S3C2440 buffer read/write
  [MTD] [NAND] S3C2410: Allow the machine code to get the BBT table from NAND
  [MTD] [NAND] S3C2410: Added a kerneldoc for s3c2410_nand_set
  mtd: physmap_of: Add multiple regions and concatenation support
  mtd: nand: max_retries off by one in mxc_nand
  mtd: nand: s3c2410_nand_setrate(): use correct macros for 2412/2440
  mtd: onenand: add bbt_wait & unlock_all as replaceable for some platform
  mtd: Flex-OneNAND support
  mtd: nand: add OMAP2/OMAP3 NAND driver
  mtd: maps: Blackfin async: fix memory leaks in probe/remove funcs
  mtd: uclinux: mark local stuff static
  mtd: uclinux: do not allow to be built as a module
  mtd: uclinux: allow systems to override map addr/size
  mtd: blackfin NFC: fix hang when using NAND on BF527-EZKITs
  ...
2009-06-22 16:56:22 -07:00
Linus Torvalds
9e268beb92 Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (49 commits)
  [ARM] idle: clean up pm_idle calling, obey hlt_counter
  [ARM] S3C: Fix gpio-config off-by-one bug
  [ARM] S3C64XX: add to_irq() support for EINT() GPIO
  [ARM] S3C64XX: clock.c: fix typo in usb-host clock ctrlbit
  [ARM] S3C64XX: fix HCLK gate defines
  [ARM] Update mach-types
  [ARM] wire up rt_tgsigqueueinfo and perf_counter_open
  OMAP2 clock/powerdomain: off by 1 error in loop timeout comparisons
  OMAP3 SDRC: set FIXEDDELAY when disabling SDRC DLL
  OMAP3: Add support for DPLL3 divisor values higher than 2
  OMAP3 SRAM: convert SRAM code to use macros rather than magic numbers
  OMAP3 SRAM: add more comments on the SRAM code
  OMAP3 clock/SDRC: program SDRC_MR register during SDRC clock change
  OMAP3 clock: add a short delay when lowering CORE clk rate
  OMAP3 clock: initialize SDRC timings at kernel start
  OMAP3 clock: remove wait for DPLL3 M2 clock to stabilize
  [ARM] Add old Feroceon support to compressed/head.S
  [ARM] 5559/1: Limit the stack unwinding caused by a kthread exit
  [ARM] 5558/1: Add extra checks to ARM unwinder to avoid tracing corrupt stacks
  [ARM] 5557/1: Discard some ARM.ex*.*exit.text sections when !HOTPLUG or !HOTPLUG_CPU
  ...
2009-06-22 14:56:13 -07:00
Russell King
9ccdac3662 [ARM] idle: clean up pm_idle calling, obey hlt_counter
pm_idle is used by infrastructure (eg, cpuidle) which expects architectures
to call it in a certain way.  Arrange for ARM to follow x86's lead on this
and call pm_idle() with interrupts already disabled.  However, we expect
pm_idle() to enable interrupts before it returns.

Also, OMAP wants to be able to disable hlt-ing, so allow hlt_counter to
prevent all calls to pm_idle.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-22 22:34:55 +01:00
David Howells
2e8b5a09eb MN10300: Fix the vmlinux ldscript
Fix the MN10300 vmlinux ldscript.  It needs to use various macros from
asm-generic/vmlinux.lds.h to correctly include all that it needs to.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22 13:34:50 -07:00
Linus Torvalds
a9b011f5ac Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (22 commits)
  [S390] Update default configuration.
  [S390] kprobes: defer setting of ctlblk state
  [S390] Enable tick based perf_counter on s390.
  [S390] dasd: fix refcounting in dasd_change_state
  [S390] lockless idle time accounting
  [S390] driver_data access
  [S390] pm: fix build error for !SMP
  [S390] dasd_pm: fix stop flag handling
  [S390] ap/zcrypt: Suspend/Resume ap bus and zcrypt
  [S390] qdio: Sanitize do_QDIO sanity checks
  [S390] qdio: leave inbound SBALs primed
  [S390] qdio: merge AI tasklet into interrupt handler
  [S390] qdio: extract all primed SBALs at once
  [S390] qdio: fix check for running under z/VM
  [S390] qdio: move adapter interrupt tasklet code
  [S390] Use del_timer instead of del_timer_sync
  [S390] s390: remove DEBUG_MALLOC
  [S390] vt220 console: convert from bootmem to slab
  [S390] sclp console: convert from bootmem to slab
  [S390] 3270 console: convert from bootmem to slab
  ...
2009-06-22 12:51:28 -07:00
Linus Torvalds
f39cf0b783 Merge git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6:
  xtensa: enable m41t80 driver in s6105_defconfig
  xtensa: add m41t62 rtc to s6105 platform
  xtensa: enable s6gmac in s6105_defconfig
  xtensa: s6105 specific configuration for s6gmac
  s6gmac: xtensa s6000 on-chip ethernet driver
  xtensa: support s6000 gpio irqs and alternate function selection
  xtensa: s6000 dma engine support
  xtensa: allow variant to initialize own irq chips
  xtensa: cache inquiry and unaligned cache handling functions
2009-06-22 12:38:31 -07:00
Linus Torvalds
59ef7a83f1 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (74 commits)
  PCI: make msi_free_irqs() to use msix_mask_irq() instead of open coded write
  PCI: Fix the NIU MSI-X problem in a better way
  PCI ASPM: remove get_root_port_link
  PCI ASPM: cleanup pcie_aspm_sanity_check
  PCI ASPM: remove has_switch field
  PCI ASPM: cleanup calc_Lx_latency
  PCI ASPM: cleanup pcie_aspm_get_cap_device
  PCI ASPM: cleanup clkpm checks
  PCI ASPM: cleanup __pcie_aspm_check_state_one
  PCI ASPM: cleanup initialization
  PCI ASPM: cleanup change input argument of aspm functions
  PCI ASPM: cleanup misc in struct pcie_link_state
  PCI ASPM: cleanup clkpm state in struct pcie_link_state
  PCI ASPM: cleanup latency field in struct pcie_link_state
  PCI ASPM: cleanup aspm state field in struct pcie_link_state
  PCI ASPM: fix typo in struct pcie_link_state
  PCI: drivers/pci/slot.c should depend on CONFIG_SYSFS
  PCI: remove redundant __msi_set_enable()
  PCI PM: consistently use type bool for wake enable variable
  x86/ACPI: Correct maximum allowed _CRS returned resources and warn if exceeded
  ...
2009-06-22 11:59:51 -07:00
Russell King
915166d96f Merge branch 'next-s3c' of git://aeryn.fluff.org.uk/bjdooks/linux into devel 2009-06-22 14:31:57 +01:00
Marek Szyprowski
49fb88af23 [ARM] S3C: Fix gpio-config off-by-one bug
Fix gpio-config off-by-one bug. Without this patch, touching GPA0 pin on
S3C64XX platform causes kernel oops.

Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-22 14:12:39 +01:00
Marek Szyprowski
0b495737f3 [ARM] S3C64XX: add to_irq() support for EINT() GPIO
N group

Add to_irq() function to onvert gpio to irq for external interrupt
group (GPN).

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-22 14:11:56 +01:00
Peter Korsgaard
386f43517f [ARM] S3C64XX: clock.c: fix typo in usb-host clock ctrlbit
The usb-host clock was using the wrong define (the SCLK enable for the
usb-host-bus) to change the HCLK register instead of the HCLK_UHOST bit.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-22 14:11:56 +01:00
Peter Korsgaard
6ade7fa7bb [ARM] S3C64XX: fix HCLK gate defines
A few typos seems to have sneaked into the HCLK gate defines, causing the
usb host clock to not get enabled. Fix them according to the reference
manual and throw in the 3d accel bit for good measure.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-22 14:11:56 +01:00
Martin Schwidefsky
da6330fccc [S390] Update default configuration.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22 12:08:25 +02:00
Heiko Carstens
acf018004f [S390] kprobes: defer setting of ctlblk state
get_krobe_ctlblk returns a per cpu kprobe control block which holds
the state of the current cpu wrt to kprobe.
When inserting/removing a kprobe the state of the cpu which replaces
the code is changed to KPROBE_SWAP_INST. This however is done when
preemption is still enabled. So the state of the current cpu doesn't
necessarily reflect the real state.
To fix this move the code that changes the state to non-preemptible
context.

Reported-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22 12:08:24 +02:00
Martin Schwidefsky
12310e9c1b [S390] Enable tick based perf_counter on s390.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22 12:08:24 +02:00
Martin Schwidefsky
e98bbaafcd [S390] lockless idle time accounting
Replace the spinlock used in the idle time accounting with a sequence
counter mechanism analog to seqlock.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22 12:08:23 +02:00
Heiko Carstens
4a9c75255e [S390] pm: fix build error for !SMP
Fix build error for !SMP:

arch/s390/power/built-in.o: In function `swsusp_arch_resume':
(.text+0x1b4): undefined reference to `smp_get_phys_cpu_id'
arch/s390/power/built-in.o: In function `swsusp_arch_resume':
(.text+0x288): undefined reference to `smp_switch_boot_cpu_in_resume'
make: *** [.tmp_vmlinux1] Error 1

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22 12:08:22 +02:00
Jan Glauber
6618241b47 [S390] qdio: Sanitize do_QDIO sanity checks
Remove unneeded sanity checks from do_QDIO since this is the hot path.
Change the type of bufnr and count to unsigned int so the check for the
maximum value works.

Reported-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22 12:08:21 +02:00
Pekka Enberg
66d51f3e81 [S390] s390: remove DEBUG_MALLOC
The kernel now has kmemleak and kmemtrace so there's no reason to keep
this ugly s390 hack around. I am not sure how it's supposed to work on
SMP anyway as it uses a global variable to temporarily store the return
value of all kmalloc() calls:

  void *b;

  #define kmalloc(x...) (PRINT_INFO(" kmalloc %p\n",b=kmalloc(x)),b)

Cc: <linux-s390@vger.kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22 12:08:18 +02:00
Heiko Carstens
d7d1104fa4 [S390] time: convert from bootmem to slab
The slab allocator is earlier available so convert the
bootmem allocations to slab/gfp allocations.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22 12:08:16 +02:00
Daniel Glockner
aafd1255d0 xtensa: enable m41t80 driver in s6105_defconfig
Signed-off-by: Daniel Glockner <dg@emlix.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-06-22 02:38:11 -07:00
Daniel Glockner
759c67e87b xtensa: add m41t62 rtc to s6105 platform
Signed-off-by: Daniel Glockner <dg@emlix.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-06-22 02:38:06 -07:00
Daniel Glockner
607c2add0f xtensa: enable s6gmac in s6105_defconfig
Signed-off-by: Daniel Glockner <dg@emlix.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Johannes Weiner <jw@emlix.com>
Cc: Oskar Schirmer <os@emlix.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-06-22 02:37:57 -07:00
Oskar Schirmer
059cafe6df xtensa: s6105 specific configuration for s6gmac
Platform-specific configuration for the s6gmac driver, including the
PHY interrupt line.

Signed-off-by: Daniel Glockner <dg@emlix.com>
Signed-off-by: Oskar Schirmer <os@emlix.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Johannes Weiner <jw@emlix.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-06-22 02:37:49 -07:00
Daniel Glöckner
0b3eb21b2f xtensa: support s6000 gpio irqs and alternate function selection
Implement an irq chip to handle interrupts via gpio.  The GPIO chip
initialization function now takes a bitmask denoting pins that should
be configured for their alternate function.

changes compared to v1:
- fixed bug on edge interrupt configuration
- accommodated to function name change
- moved definition of VARIANT_NR_IRQS to this patch
- renamed __XTENSA_S6000_IRQ_H to _XTENSA_S6000_IRQ_H as requested

Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Johannes Weiner <jw@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2009-06-22 02:37:26 -07:00
Oskar Schirmer
f24e552c2d xtensa: s6000 dma engine support
There are four slightly different dma engines on the s6000 family.
One for memory-memory transfers, the other three for memory-device.

This patch implements a platform-specific kernel-API to control these
engines.  It is needed for the network, video, audio peripherals on
s6000.

Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Daniel Glockner <dg@emlix.com>
Signed-off-by: Fabian Godehardt <fg@emlix.com>
Cc: Daniel Glockner <dg@emlix.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Zankel <chris@zankel.net>
2009-06-22 02:37:11 -07:00
Daniel Glöckner
1beee21030 xtensa: allow variant to initialize own irq chips
There was already a PLATFORM_NR_IRQS define, which is now accompanied
by a VARIANT_NR_IRQS. To be able to initialize these interrupts,
init_IRQ now calls a variant specific hook.

Changes compared to v1:
- adapted to new CONFIG_VARIANT_IRQ_EXT
- removed definition and call of platform_init_IRQ as there already
  is a platform_init_irq defined in asm/platform.h with a weak default
  in kernel/platform.c
- renamed variant_init_IRQ to variant_init_irq

Note that I could not find the call site of platform_init_irq although
it is stated in platform.h that it is called from init_IRQ.

Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2009-06-22 02:36:59 -07:00
Oskar Schirmer
bd974240c9 xtensa: cache inquiry and unaligned cache handling functions
The existing xtensa cache handling functions work on page-aligned
memory regions.

These functions are needed for the s6000 dma engine which can work on
a byte-granularity.

Signed-off-by: Oskar Schirmer <os@emlix.com>
Cc: Johannes Weiner <jw@emlix.com>
Cc: Daniel Glockner <dg@emlix.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Zankel <chris@zankel.net>
2009-06-22 02:36:50 -07:00
Linus Torvalds
00d94a6a5e Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: aes-ni - Remove CRYPTO_TFM_REQ_MAY_SLEEP from fpu template
  crypto: aes-ni - Do not sleep when using the FPU
  crypto: aes-ni - Fix cbc mode IV saving
  crypto: padlock-aes - work around Nano CPU errata in CBC mode
  crypto: padlock-aes - work around Nano CPU errata in ECB mode
2009-06-21 13:14:07 -07:00
Linus Torvalds
d06063cc22 Move FAULT_FLAG_xyz into handle_mm_fault() callers
This allows the callers to now pass down the full set of FAULT_FLAG_xyz
flags to handle_mm_fault().  All callers have been (mechanically)
converted to the new calling convention, there's almost certainly room
for architectures to clean up their code and then add FAULT_FLAG_RETRY
when that support is added.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-21 13:08:22 -07:00
Linus Torvalds
9063c61fd5 x86, 64-bit: Clean up user address masking
The discussion about using "access_ok()" in get_user_pages_fast() (see
commit 7f81890687: "x86: don't use
'access_ok()' as a range check in get_user_pages_fast()" for details and
end result), made us notice that x86-64 was really being very sloppy
about virtual address checking.

So be way more careful and straightforward about masking x86-64 virtual
addresses:

 - All the VIRTUAL_MASK* variants now cover half of the address
   space, it's not like we can use the full mask on a signed
   integer, and the larger mask just invites mistakes when
   applying it to either half of the 48-bit address space.

 - /proc/kcore's kc_offset_to_vaddr() becomes a lot more
   obvious when it transforms a file offset into a
   (kernel-half) virtual address.

 - Unify/simplify the 32-bit and 64-bit USER_DS definition to
   be based on TASK_SIZE_MAX.

This cleanup and more careful/obvious user virtual address checking also
uncovered a buglet in the x86-64 implementation of strnlen_user(): it
would do an "access_ok()" check on the whole potential area, even if the
string itself was much shorter, and thus return an error even for valid
strings. Our sloppy checking had hidden this.

So this fixes 'strnlen_user()' to do this properly, the same way we
already handled user strings in 'strncpy_from_user()'.  Namely by just
checking the first byte, and then relying on fault handling for the
rest.  That always works, since we impose a guard page that cannot be
mapped at the end of the user space address space (and even if we
didn't, we'd have the address space hole).

Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-20 15:40:00 -07:00
Russell King
3eadd3b21c [ARM] Update mach-types
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-20 22:28:41 +01:00
Russell King
e01916e3e7 [ARM] wire up rt_tgsigqueueinfo and perf_counter_open
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-20 22:25:45 +01:00
Linus Torvalds
12e24f34cb Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (49 commits)
  perfcounter: Handle some IO return values
  perf_counter: Push perf_sample_data through the swcounter code
  perf_counter tools: Define and use our own u64, s64 etc. definitions
  perf_counter: Close race in perf_lock_task_context()
  perf_counter, x86: Improve interactions with fast-gup
  perf_counter: Simplify and fix task migration counting
  perf_counter tools: Add a data file header
  perf_counter: Update userspace callchain sampling uses
  perf_counter: Make callchain samples extensible
  perf report: Filter to parent set by default
  perf_counter tools: Handle lost events
  perf_counter: Add event overlow handling
  fs: Provide empty .set_page_dirty() aop for anon inodes
  perf_counter: tools: Makefile tweaks for 64-bit powerpc
  perf_counter: powerpc: Add processor back-end for MPC7450 family
  perf_counter: powerpc: Make powerpc perf_counter code safe for 32-bit kernels
  perf_counter: powerpc: Change how processor-specific back-ends get selected
  perf_counter: powerpc: Use unsigned long for register and constraint values
  perf_counter: powerpc: Enable use of software counters on 32-bit powerpc
  perf_counter tools: Add and use isprint()
  ...
2009-06-20 11:29:32 -07:00
Linus Torvalds
1eb51c33b2 Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Fix out of scope variable access in sched_slice()
  sched: Hide runqueues from direct refer at source code level
  sched: Remove unneeded __ref tag
  sched, x86: Fix cpufreq + sched_clock() TSC scaling
2009-06-20 10:57:40 -07:00
Linus Torvalds
b0b7065b64 Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (24 commits)
  tracing/urgent: warn in case of ftrace_start_up inbalance
  tracing/urgent: fix unbalanced ftrace_start_up
  function-graph: add stack frame test
  function-graph: disable when both x86_32 and optimize for size are configured
  ring-buffer: have benchmark test print to trace buffer
  ring-buffer: do not grab locks in nmi
  ring-buffer: add locks around rb_per_cpu_empty
  ring-buffer: check for less than two in size allocation
  ring-buffer: remove useless compile check for buffer_page size
  ring-buffer: remove useless warn on check
  ring-buffer: use BUF_PAGE_HDR_SIZE in calculating index
  tracing: update sample event documentation
  tracing/filters: fix race between filter setting and module unload
  tracing/filters: free filter_string in destroy_preds()
  ring-buffer: use commit counters for commit pointer accounting
  ring-buffer: remove unused variable
  ring-buffer: have benchmark test handle discarded events
  ring-buffer: prevent adding write in discarded area
  tracing/filters: strloc should be unsigned short
  tracing/filters: operand can be negative
  ...

Fix up kmemcheck-induced conflict in kernel/trace/ring_buffer.c manually
2009-06-20 10:56:46 -07:00
Linus Torvalds
c4c5ab3089 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (45 commits)
  x86, mce: fix error path in mce_create_device()
  x86: use zalloc_cpumask_var for mce_dev_initialized
  x86: fix duplicated sysfs attribute
  x86: de-assembler-ize asm/desc.h
  i386: fix/simplify espfix stack switching, move it into assembly
  i386: fix return to 16-bit stack from NMI handler
  x86, ioapic: Don't call disconnect_bsp_APIC if no APIC present
  x86: Remove duplicated #include's
  x86: msr.h linux/types.h is only required for __KERNEL__
  x86: nmi: Add Intel processor 0x6f4 to NMI perfctr1 workaround
  x86, mce: mce_intel.c needs <asm/apic.h>
  x86: apic/io_apic.c: dmar_msi_type should be static
  x86, io_apic.c: Work around compiler warning
  x86: mce: Don't touch THERMAL_APIC_VECTOR if no active APIC present
  x86: mce: Handle banks == 0 case in K7 quirk
  x86, boot: use .code16gcc instead of .code16
  x86: correct the conversion of EFI memory types
  x86: cap iomem_resource to addressable physical memory
  x86, mce: rename _64.c files which are no longer 64-bit-specific
  x86, mce: mce.h cleanup
  ...

Manually fix up trivial conflict in arch/x86/mm/fault.c
2009-06-20 10:49:48 -07:00
Linus Torvalds
7fd5b632db Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Add missing symbols for CONSTRUCTORS support
  microblaze: remove init_mm
2009-06-20 10:37:01 -07:00
Linus Torvalds
93db629495 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (35 commits)
  Input: add driver for Synaptics I2C touchpad
  Input: synaptics - add support for reporting x/y resolution
  Input: ALPS - handle touchpoints buttons correctly
  Input: gpio-keys - change timer to workqueue
  Input: ads7846 - pin change interrupt support
  Input: add support for touchscreen on W90P910 ARM platform
  Input: appletouch - improve finger detection
  Input: wacom - clear Intuos4 wheel data when finger leaves proximity
  Input: ucb1400 - move static function from header into core
  Input: add driver for EETI touchpanels
  Input: ads7846 - more detailed model name in sysfs
  Input: ads7846 - support swapping x and y axes
  Input: ati_remote2 - use non-atomic bitops
  Input: introduce lm8323 keypad driver
  Input: psmouse - ESD workaround fix for OLPC XO touchpad
  Input: tsc2007 - make sure platform provides get_pendown_state()
  Input: uinput - flush all pending ff effects before destroying device
  Input: simplify name handling for certain input handles
  Input: serio - do not use deprecated dev.power.power_state
  Input: wacom - add support for Intuos4 tablets
  ...
2009-06-20 10:17:02 -07:00
Linus Torvalds
7f81890687 x86: don't use 'access_ok()' as a range check in get_user_pages_fast()
It's really not right to use 'access_ok()', since that is meant for the
normal "get_user()" and "copy_from/to_user()" accesses, which are done
through the TLB, rather than through the page tables.

Why? access_ok() does both too few, and too many checks.  Too many,
because it is meant for regular kernel accesses that will not honor the
'user' bit in the page tables, and because it honors the USER_DS vs
KERNEL_DS distinction that we shouldn't care about in GUP.  And too few,
because it doesn't do the 'canonical' check on the address on x86-64,
since the TLB will do that for us.

So instead of using a function that isn't meant for this, and does
something else and much more complicated, just do the real rules: we
don't want the range to overflow, and on x86-64, we want it to be a
canonical low address (on 32-bit, all addresses are canonical).

Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-20 09:52:27 -07:00
Michal Simek
05bf7d4631 microblaze: Add missing symbols for CONSTRUCTORS support
Commit b99b87f70c add CONSTRUCTOR
support to Linux but Microblaze not defined KERNEL_CTORS symbols
which are used with that patch.
This patch fixed it.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-06-20 14:36:58 +02:00
Arnd Bergmann
20f54c490c microblaze: remove init_mm
Alexey removed the definition for init_mm from all architectures
but forgot microblaze, which was only recently added.
This fixes the microblaze build by dropping it there as well.

Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-06-20 14:36:50 +02:00
Russell King
312cec5d09 Merge branch 'omap-clock-for-next' of git://git.pwsan.com/linux-2.6 into devel 2009-06-20 10:57:40 +01:00
Ingo Molnar
1d99100120 Merge branch 'x86/mce3' into x86/urgent 2009-06-20 10:54:22 +02:00
Pallipadi, Venkatesh
7b768f07dc ACPI: pdc init related memory leak with physical CPU hotplug
arch_acpi_processor_cleanup_pdc() in x86 and ia64 results in memory allocated
for _PDC objects that is never freed and will cause memory leak in case of
physical CPU remove and add. Patch fixes the memory leak by freeing the
objects soon after _PDC is evaluated.

Reported-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-20 00:50:52 -04:00
Roel Kluin
2687069f3a OMAP2 clock/powerdomain: off by 1 error in loop timeout comparisons
with while (i++ < MAX_CLOCK_ENABLE_WAIT); i can reach MAX_CLOCK_ENABLE_WAIT + 1
after the loop, so if (i == MAX_CLOCK_ENABLE_WAIT) that's still success.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-06-19 19:09:32 -06:00
Paul Walmsley
7b7bcefa35 OMAP3 SDRC: set FIXEDDELAY when disabling SDRC DLL
Correspondence with the TI OMAP hardware team indicates that
SDRC_DLLA_CTRL.FIXEDDELAY should be initialized to 0x0f.  This number
was apparently derived from process validation.  This is only used
when the SDRC DLL is unlocked (e.g., SDRC clock frequency less than
83MHz).

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-06-19 19:09:32 -06:00
Tero Kristo
3afec6332e OMAP3: Add support for DPLL3 divisor values higher than 2
Previously only 1 and 2 was supported. This is needed for DVFS VDD2 control.

Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
2009-06-19 19:09:32 -06:00
Paul Walmsley
df14e4747a OMAP3 SRAM: convert SRAM code to use macros rather than magic numbers
Convert omap3_sram_configure_core_dpll() to use macros rather than
magic numbers.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-06-19 19:09:32 -06:00
Paul Walmsley
4267b5d152 OMAP3 SRAM: add more comments on the SRAM code
Clean up comments and copyrights on the CORE DPLL3 M2 divider change code.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-06-19 19:09:31 -06:00
Paul Walmsley
d0ba3922ae OMAP3 clock/SDRC: program SDRC_MR register during SDRC clock change
Program the SDRC_MR_0 register as well during SDRC clock changes.
This register allows selection of the memory CAS latency.  Some SDRAM
chips, such as the Qimonda HYB18M512160AF6, have a lower CAS latency
at lower clock rates.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-06-19 19:09:31 -06:00
Paul Walmsley
c9812d042a OMAP3 clock: add a short delay when lowering CORE clk rate
When changing the SDRAM clock from 166MHz to 83MHz via the CORE DPLL M2
divider, add a short delay before returning to SDRAM to allow the SDRC
time to stabilize.  Without this delay, the system is prone to random
panics upon re-entering SDRAM.

This time delay varies based on MPU frequency.  At 500MHz MPU frequency at
room temperature, 64 loops seems to work okay; so add another 32 loops for
environmental and process variation.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-06-19 19:09:31 -06:00
Paul Walmsley
2f135eaf18 OMAP3 clock: initialize SDRC timings at kernel start
On the OMAP3, initialize SDRC timings when the kernel boots.  This ensures
that the kernel is running with known, optimized SDRC timings, rather than
whatever was configured by the bootloader.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-06-19 19:09:30 -06:00
Paul Walmsley
6adb8f388e OMAP3 clock: remove wait for DPLL3 M2 clock to stabilize
The original CDP kernel that this code comes from waited for 0x800
loops after switching the CORE DPLL M2 divider.  This does not appear
to be necessary.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-06-19 19:09:30 -06:00
Linus Torvalds
ee37ba7a42 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6:
  sparc64: Fix UP bootup regression.
2009-06-19 17:42:01 -07:00
Linus Torvalds
773d7a09e1 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (35 commits)
  powerpc/5121: make clock debug output more readable
  powerpc/5xxx: Add common mpc5xxx_get_bus_frequency() function
  powerpc/5200: Update pcm030.dts to add i2c eeprom and delete cruft
  powerpc/5200: convert mpc52xx_psc_spi to use cs_control callback
  fbdev/xilinxfb: Fix improper casting and tighen up probe path
  usb/ps3: Add missing annotations
  powerpc: Add memory clobber to mtspr()
  powerpc: Fix invalid construct in our CPU selection Kconfig
  ps3rom: Use ps3_system_bus_[gs]et_drvdata() instead of direct access
  powerpc: Add configurable -Werror for arch/powerpc
  of_serial: Add UPF_FIXED_TYPE flag
  drivers/hvc: Add missing __devexit_p()
  net/ps3: gelic - Add missing annotations
  powerpc: Introduce macro spin_event_timeout()
  powerpc/warp: Fix ISA_DMA_THRESHOLD default
  powerpc/bootwrapper: Custom build options for XPedite52xx targets
  powerpc/85xx: Add defconfig for X-ES MPC85xx boards
  powerpc/85xx: Add dts files for X-ES MPC85xx boards
  powerpc/85xx: Add platform support for X-ES MPC85xx boards
  83xx: add support for the kmeter1 board.
  ...
2009-06-19 17:40:40 -07:00
Linus Torvalds
17fad5209e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin:
  Blackfin: convert page/tlb to asm-generic
  Blackfin: convert types to asm-generic
  Blackfin: convert irq/process to asm-generic
  Blackfin: convert signal/mmap to asm-generic
  Blackfin: convert locking primitives to asm-generic
  Blackfin: convert termios to asm-generic
  Blackfin: convert simple headers to asm-generic
  Blackfin: convert socket/poll to asm-generic
  Blackfin: convert user/elf to asm-generic
  Blackfin: convert shm/sysv/ipc to asm-generic
  Blackfin: convert asm/ioctls.h to asm-generic/ioctls.h
  Blackfin: only build irqpanic.c when needed
  Blackfin: pull in asm/io.h in ksyms for prototypes
  Blackfin: use common test_bit() rather than __test_bit()
2009-06-19 17:34:46 -07:00
Anton Vorontsov
d2998c2c36 powerpc/86xx: add MMC SPI support for MPC8610HPCD boards
This patch adds spi and mmc-spi-slot nodes, plus a gpio-controller for
PIXIS' sdcsr bank that is used for managing SPI chip-select and for
reading card's states.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-19 16:46:04 -07:00
Russell King
48ec2b53fe Merge branch 'for-rmk' of git://git.marvell.com/orion into devel 2009-06-19 19:59:36 +01:00
Joonyoung Shim
5587931c30 [ARM] Add old Feroceon support to compressed/head.S
This patch supports the cache handling for some old Feroceon cores for
which the CPU ID is like 0x41159260.  This is a complement to
commit ab6d15d506.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-06-19 13:38:53 -04:00
Catalin Marinas
feb97c3644 [ARM] 5559/1: Limit the stack unwinding caused by a kthread exit
When a kthread function returns, it branches to do_exit(). However, the
unwinding information isn't valid anymore and any stack trace caused by
do_exit() may be incorrect. This patch adds a kernel_thread_exit()
function and annotated with '.cantunwind' so that the unwinder stops
when reaching it.

Tested-by: Tony Lindgren <tony@atomide.com>

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-19 16:44:23 +01:00
Catalin Marinas
c894ed6956 [ARM] 5558/1: Add extra checks to ARM unwinder to avoid tracing corrupt stacks
There are situations where the unwinder goes beyond stack boundaries and
unwinds random data. This patch moves the stack boundaries check after
the unwind_exec_insn() call and adds an extra check for possible
infinite loops (like "mov pc, lr" with pc == lr).

The patch also fixes a bug in the unwind instructions interpreter. The
0xb0 instruction can only set PC to LR if this wasn't already set by
a previous instruction (this is used on exceptions taken while in kernel
mode where svc_entry is annotated with ".save {r0 - pc}").

Tested-by: Tony Lindgren <tony@atomide.com>

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-19 16:44:22 +01:00
Catalin Marinas
7436127ce9 [ARM] 5557/1: Discard some ARM.ex*.*exit.text sections when !HOTPLUG or !HOTPLUG_CPU
Not discarding these sections when hotplug isn't available prevents the
kernel from building.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-19 16:44:21 +01:00
George G. Davis
c2860d43f5 [ARM] 5540/1: 32-bit Thumb-2 {ld,st}{m,rd} alignment fault fixup support
From: Min Zhang <mzhang@mvista.com>

Add alignment fault fixup support for 32-bit Thumb-2 LDM, LDRD, POP,
PUSH, STM and STRD instructions.  Alignment fault fixup support for
the remaining 32-bit Thumb-2 load/store instruction cases is not
included since ARMv6 and later processors include hardware support
for loads and stores of unaligned words and halfwords.

Signed-off-by: Min Zhang <mzhang@mvista.com>
Signed-off-by: George G. Davis <gdavis@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-19 16:35:34 +01:00
Ingo Molnar
0c87197142 perf_counter, x86: Improve interactions with fast-gup
Improve a few details in perfcounter call-chain recording that
makes use of fast-GUP:

- Use ACCESS_ONCE() to observe the pte value. ptes are fundamentally
  racy and can be changed on another CPU, so we have to be careful
  about how we access them. The PAE branch is already careful with
  read-barriers - but the non-PAE and 64-bit side needs an
  ACCESS_ONCE() to make sure the pte value is observed only once.

- make the checks a bit stricter so that we can feed it any kind of
  cra^H^H^H user-space input ;-)

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-19 16:55:16 +02:00
Catalin Marinas
41184f6a5e [ARM] 5556/1: Fix the irq_desc.cpu references
The cpu member of struct irq_desc was recently renamed to node. The
patch renames the ARM references to the old member.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-19 15:11:16 +01:00
Catalin Marinas
c3c2174031 [ARM] 5555/1: RealView: Include asm/smp_twd.h in realview-pbx.c
This header file is needed for twd_base.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-19 15:10:58 +01:00
Peter Zijlstra
f9188e023c perf_counter: Make callchain samples extensible
Before exposing upstream tools to a callchain-samples ABI, tidy it
up to make it more extensible in the future:

Use markers in the IP chain to denote context, use (u64)-1..-4095 range
for these context markers because we use them for ERR_PTR(), so these
addresses are unlikely to be mapped.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-19 13:42:34 +02:00
David S. Miller
b99c6ebe8f sparc64: Fix UP bootup regression.
Commit b696fdc259 ("sparc64: Defer
cpu_data() setup until end of per-cpu data initialization.") broke
bootup for UP builds because the cpu_data() initialization only
occurs in setup_per_cpu_areas() which is never compiled in nor
called in UP builds.

Fix this up by calling the setups directly from init_64.c when
non-SMP.

Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Tested-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18 23:50:41 -07:00
Mike Frysinger
eec511d75e Blackfin: convert page/tlb to asm-generic
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-18 21:42:30 -04:00
Mike Frysinger
0f65285957 Blackfin: convert types to asm-generic
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-18 21:42:24 -04:00
Mike Frysinger
d5ce528c8e Blackfin: convert irq/process to asm-generic
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-18 21:41:56 -04:00
Mike Frysinger
415f92da75 Blackfin: convert signal/mmap to asm-generic
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-18 21:41:26 -04:00
Mike Frysinger
3d15063093 Blackfin: convert locking primitives to asm-generic
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-18 21:41:22 -04:00
Mike Frysinger
22a151c1bc Blackfin: convert termios to asm-generic
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-18 21:41:17 -04:00
Mike Frysinger
094167be1f Blackfin: convert simple headers to asm-generic
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-18 21:41:13 -04:00
Mike Frysinger
3be5646c98 Blackfin: convert socket/poll to asm-generic
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-18 21:41:08 -04:00
Mike Frysinger
420b61f4a7 Blackfin: convert user/elf to asm-generic
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-18 21:41:03 -04:00
Mike Frysinger
71b844f163 Blackfin: convert shm/sysv/ipc to asm-generic
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-18 21:40:58 -04:00
Mike Frysinger
83dab40350 Blackfin: convert asm/ioctls.h to asm-generic/ioctls.h
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-18 21:40:53 -04:00
Mike Frysinger
cf8d943260 Blackfin: only build irqpanic.c when needed
The irq_panic function is only used when CONFIG_DEBUG_ICACHE_CHECK is
enabled, so move the conditional build to the Makefile rather than
wrapping all of the contents of the file.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-18 21:40:49 -04:00
Mike Frysinger
abea0bc3d9 Blackfin: pull in asm/io.h in ksyms for prototypes
Make sure we pull in asm/io.h when exporting symbols for the I/O functions
so we don't end up with a build failure due to missing prototypes.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-18 21:40:44 -04:00
Mike Frysinger
c36953419b Blackfin: use common test_bit() rather than __test_bit()
Convert to test_bit() as that is what pretty much everyone uses and allows
us to migrate asm/bitops.h to the asm-generic version.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-18 21:40:40 -04:00