Commit graph

93 commits

Author SHA1 Message Date
Stephen M. Cameron
edd163687e [SCSI] hpsa: add driver for HP Smart Array controllers.
This driver supports a subset of HP Smart Array Controllers.
It is a SCSI alternative to the cciss driver.

[akpm@linux-foundation.org: avoid helpful cleanup patches]
[achiang@hp.com: make device attrs static]
[akpm@linux-foundation.org: msleep() does set_current_state() itself]
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Mike Miller <mikem@beardog.cce.hp.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-10 09:55:00 -06:00
adam radford
f619106bdd [SCSI] 3w-sas: Add new driver for LSI 3ware 9750
[jejb: fix up for new queue depth code]
Signed-off-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:00:51 -06:00
Alok Kataria
851b164231 [SCSI] vmw_pvscsi: SCSI driver for VMware's virtual HBA.
This is a driver for VMware's paravirtualized SCSI device,
which should improve disk performance for guests running
under control of VMware hypervisors that support such devices.

Signed-off-by: Alok N Kataria <akataria@vmware.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:00:49 -06:00
jack wang
dbf9bfe615 [SCSI] pm8001: add SAS/SATA HBA driver
This driver supports PMC-Sierra PCIe SAS/SATA 8x6G SPC 8001 chip based
host adapters.

Signed-off-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: Lindar Liu <lindar_liu@usish.com>
Signed-off-by: Tom Peng <tom_peng@usish.com>
Signed-off-by: Kevin Ao <aoqingyun@usish.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:00:40 -06:00
Jayamohan Kallickal
6733b39a13 [SCSI] be2iscsi: add 10Gbps iSCSI - BladeEngine 2 driver
[v2: fixed up virt_to_bus() issue spotted by sfr]
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-02 09:50:33 -05:00
Jing Huang
7725ccfda5 [SCSI] bfa: Brocade BFA FC SCSI driver
Add new driver for Brocade Hardware

Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-02 09:47:40 -05:00
Anil Ravindranath
89a3681041 [SCSI] pmcraid: PMC-Sierra MaxRAID driver to support 6Gb/s SAS RAID controller
Signed-off-by: Anil Ravindranath <anil_ravindranath@pmc-sierra.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-12 09:35:24 -05:00
Michael Chan
cf4e636385 [SCSI] bnx2i: Add bnx2i iSCSI driver.
New iSCSI driver for Broadcom BNX2 devices.  The driver interfaces with
the CNIC driver to access the hardware.

Signed-off-by: Anil Veerabhadrappa <anilgv@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-09 10:22:45 -05:00
Jeff Garzik
2ad52f473b [SCSI] mvsas: move into new directory drivers/scsi/mvsas/
Zero functional changes, just file movement.

This commit prepares for the upcoming integration of the
Marvell-provided driver update that splits the driver into support
for both 64xx and 94xx chip families.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-05-20 17:21:12 -05:00
Abhijeet Joglekar
5df6d737dd [SCSI] fnic: Add new Cisco PCI-Express FCoE HBA
fnic is a driver for the Cisco PCI-Express FCoE HBA

Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com>
Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-05-13 22:13:09 -04:00
Vasu Dev
9b34ecffd5 [SCSI] fcoe, libfc: add libfcoe module
Just sets up build environment for libfcoe module towards a
libfcoe library for libfc LLDs using FCoE as libfc transport.

Common library code to libfcoe is added in next patch.

Also, updated MODULE_LICENSE from "GPL" string to "GPL v2" for
libfc, libfcoe and fcoe modules to accurately match the licenses.

Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03 09:23:04 -05:00
Eric Moore
635374e7eb [SCSI] mpt2sas v00.100.11.15
* This is new scsi lld device driver from LSI supporting the SAS 2.0
  standard. I have split patchs by filename.

* Here is list of new 6gb host controllers:

  LSI SAS2004
  LSI SAS2008
  LSI SAS2108
  LSI SAS2116

* Here are the changes in the 4th posting of this patch set:

(1) fix compile errors when SCSI_MPT2SAS_LOGGING is not enabled
(2) add mpt2sas to the SCSI Mid Layer Makefile
(3) append mpt2sas_ to the naming of all non-static functions
(4) fix oops for SMP_PASSTHRU
(5) doorbell algorithm imported changes from windows driver

* Here are the changes in the 3rd posting of this patch set:

(1) add readl following writel from the function that disables interrupts
(2) replace 0xFFFFFFFFFFFFFFFFULL with ~0ULL
(3) when calling pci_enable_msix, only pass one msix entry (instead of 15).
(4) remove the "current HW implementation uses..... " comment in the sources
(5) merged bug fix for SIGIO/POLLIN notifcation; reported by the storlib team.

* Here are the changes in the 2nd posting of this patch set:

(1) use little endian types in the mpi headers
(2) merged in bug fix's from inhouse drivers.

Signed-off-by: Eric Moore <eric.moore@lsi.com>
Tested-by: peter Bogdanovic <pbog@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-13 16:08:49 -05:00
Boaz Harrosh
68274794c6 [SCSI] scsi: Add osd library to build system
OSD in kernel source code is assumed to be at:
drivers/scsi/osd/ with its own Makefile and Kconfig

Add includes to them from drivers/scsi Makefile and Kconfig
Add OSD to MAINTAINERS file

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Reviewed-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12 12:58:09 -05:00
FUJITA Tomonori
93c164af19 remove ide-scsi
As planed, this removes ide-scsi.

The 2.6 kernel supports direct writing to ide CD drives, which
eliminates the need for ide-scsi. ide-scsi has been unmaintained and
marked as deprecated.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James.Bottomley@HansenPartnership.com
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-02 16:12:51 +01:00
Karen Xie
c3673464eb [SCSI] cxgb3i: Add cxgb3i iSCSI driver.
This patch implements the cxgb3i iscsi connection acceleration for the
open-iscsi initiator.

The cxgb3i driver offers the iscsi PDU based offload:
- digest insertion and verification
- payload direct-placement into host memory buffer.

Signed-off-by: Karen Xie <kxie@chelsio.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-30 10:45:33 -06:00
Robert Love
85b4aa4926 [SCSI] fcoe: Fibre Channel over Ethernet
Encapsulation protocol for running Fibre Channel over Ethernet interfaces.
Creates virtual Fibre Channel host adapters using libfc.

This layer is the LLD to the scsi-ml. It allocates the Scsi_Host, utilizes
libfc for Fibre Channel protocol processing and interacts with netdev to
send/receive Ethernet packets.

Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29 11:24:33 -06:00
Robert Love
42e9a92fe6 [SCSI] libfc: A modular Fibre Channel library
libFC is composed of 4 blocks supported by an exchange manager
and a framing library. The upper 4 layers are fc_lport, fc_disc,
fc_rport and fc_fcp. A LLD that uses libfc could choose to
either use libfc's block, or using the transport template
defined in libfc.h, override one or more blocks with its own
implementation.

The EM (Exchange Manager) manages exhcanges/sequences for all
commands- ELS, CT and FCP.

The framing library frames ELS and CT commands.

The fc_lport block manages the library's representation of the
host's FC enabled ports.

The fc_disc block manages discovery of targets as well as
handling changes that occur in the FC fabric (via. RSCN events).

The fc_rport block manages the library's representation of other
entities in the FC fabric. Currently the library uses this block
for targets, its peer when in point-to-point mode and the
directory server, but can be extended for other entities if
needed.

The fc_fcp block interacts with the scsi-ml and handles all
I/O.

Signed-off-by: Robert Love <robert.w.love@intel.com>
[jejb: added include of delay.h to fix ppc64 compile prob spotted by sfr]
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29 11:24:33 -06:00
Mike Christie
38e1a8f547 [SCSI] iscsi_tcp: hook iscsi_tcp into new libiscsi_tcp module
This hooks iscsi_tcp into the libiscsi_tcp module and removes
code that is now in libiscsi_tcp.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29 11:24:22 -06:00
Martin K. Petersen
af55ff675a [SCSI] sd: Support for SCSI disk (SBC) Data Integrity Field
Support for controllers and disks that implement DIF protection
information:

 - During command preparation the RDPROTECT/WRPROTECT must be set
   correctly if the target has DIF enabled.

 - READ(6) and WRITE(6) are not supported when DIF is on.

 - The controller must be told how to handle the I/O via the
   protection operation field in scsi_cmnd.

 - Refactor the I/O completion code that extracts failed LBA from the
   returned sense data and handle DIF failures correctly.

 - sd_dif.c implements the functions required to prepare and complete
   requests with protection information attached.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26 15:14:56 -04:00
Brian King
072b91f9c6 [SCSI] ibmvfc: IBM Power Virtual Fibre Channel Adapter Client Driver
This patch adds a new device driver to support the Virtual Fibre Channel
interface on IBM Power based servers. The Virtual I/O Server on IBM Power
servers utilizes N-Port ID Virtualization to export a Virtual Fibre Channel
adapter to the client. This driver is the client device driver.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-12 08:22:32 -05:00
Chandra Seetharaman
a6a8d9f87e [SCSI] scsi_dh: add infrastructure for SCSI Device Handlers
Some of the storage devices (that can be accessed through multiple paths),
do need some special handling for
	1. Activating the passive path of the storage access.
	2. Decode and handle the special sense codes returned by the devices.
	3. Handle the I/Os being sent to the passive path, especially
           during the device probe time.
when accessed through multiple paths.

As of today this special device handling is done at the dm-multipath
layer using dm-handlers. That works well for (1); for (2) to be handled
at dm layer, scsi sense information need to be exported from SCSI to dm-layer,
which is not very attractive; (3) cannot be done at all at the dm layer.

Device handler has been moved to SCSI mainly to handle (2) and (3) properly.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-06-05 09:23:40 -05:00
Finn Thain
6fe07aaffb [SCSI] m68k: new mac_esp scsi driver
Replace the mac_esp driver with a new one based on the esp_scsi core.

For esp_scsi: add support for sync transfers for the PIO mode, add a new
esp_driver_ops method to get the maximum dma transfer size (like the old
NCR53C9x driver), and some cleanups.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-27 12:19:57 -05:00
Jeff Garzik
b576294826 [SCSI] mvsas: Add Marvell 6440 SAS/SATA driver
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-23 07:29:31 -06:00
James Bottomley
9927c68864 [SCSI] ses: add new Enclosure ULD
This adds support to SCSI for enclosure services devices. It also makes
use of the enclosure services added in an earlier patch to display the
enclosure topology in sysfs.

At the moment, the enclosures are SAS specific, but if anyone actually
has a non-SAS enclosure that follows the SES-2 standard, we can add that
as well.

On my Vitesse based system, the enclosures show up like this:

sparkweed:~# ls -l /sys/class/enclosure/0\:0\:1\:0/
total 0
-r--r--r-- 1 root root 4096 2008-02-03 15:44 components
lrwxrwxrwx 1 root root    0 2008-02-03 15:44 device -> ../../../devices/pci0000:01/0000:01:02.0/host0/port-0:0/expander-0:0/port-0:0:12/end_device-0:0:12/target0:0:1/0:0:1:0
drwxr-xr-x 2 root root    0 2008-02-03 15:44 SLOT 000
drwxr-xr-x 2 root root    0 2008-02-03 15:44 SLOT 001
drwxr-xr-x 2 root root    0 2008-02-03 15:44 SLOT 002
drwxr-xr-x 2 root root    0 2008-02-03 15:44 SLOT 003
drwxr-xr-x 2 root root    0 2008-02-03 15:44 SLOT 004
drwxr-xr-x 2 root root    0 2008-02-03 15:44 SLOT 005
lrwxrwxrwx 1 root root    0 2008-02-03 15:44 subsystem -> ../../enclosure
--w------- 1 root root 4096 2008-02-03 15:44 uevent

And the individual occupied slots like this:

sparkweed:~# ls -l /sys/class/enclosure/0\:0\:1\:0/SLOT\ 001/
total 0
-rw-r--r-- 1 root root 4096 2008-02-03 15:45 active
lrwxrwxrwx 1 root root    0 2008-02-03 15:45 device -> ../../../../devices/pci0000:01/0000:01:02.0/host0/port-0:0/expander-0:0/port-0:0:11/end_device-0:0:11/target0:0:0/0:0:0:0
-rw-r--r-- 1 root root 4096 2008-02-03 15:45 fault
-rw-r--r-- 1 root root 4096 2008-02-03 15:45 locate
-rw-r--r-- 1 root root 4096 2008-02-03 15:45 status
lrwxrwxrwx 1 root root    0 2008-02-03 15:45 subsystem -> ../../../enclosure_component
-r--r--r-- 1 root root 4096 2008-02-03 15:45 type
--w------- 1 root root 4096 2008-02-03 15:45 uevent

You can flash the various blinky lights by echoing to the fault and locate files.

>From the device's point of view, you can see it has an enclosure like this:

sparkweed:~# ls /sys/class/scsi_disk/0\:0\:0\:0/device/
block:sda                     generic        queue_depth          state
bsg:0:0:0:0                   iocounterbits  queue_type           subsystem
bus                           iodone_cnt     rescan               timeout
delete                        ioerr_cnt      rev                  type
device_blocked                iorequest_cnt  scsi_device:0:0:0:0  uevent
driver                        modalias       scsi_disk:0:0:0:0    vendor
enclosure_component:SLOT 001  model          scsi_generic:sg0
evt_media_change              power          scsi_level

Note the enclosure_component:SLOT 001 which shows where in the enclosure
this device fits.

The astute will notice that I'm using SCSI VPD Inquiries to identify the
devices.  This, unfortunately, won't work for SATA devices unless we do
some really nasty hacking about on the SAT because the only think that
knows the SAS addresses for SATA devices is libsas, not libata where the
SAT resides.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:04:10 -06:00
James Bottomley
642978beb4 [SCSI] remove m68k NCR53C9x based drivers
These drivers depend on the deprecated NCR53C9X core and need to be converted
to the esp_scsi core.

Acked-by: Boaz Harrosh <bharrosh@panasas.com>
Cc: Linux/m68k <linux-m68k@vger.kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:42 -06:00
James Bottomley
da19d2f532 [SCSI] dec_esp: Remove driver
This driver depends on the deprecated NCR53C9X core and needs to be converted
to the esp_scsi core.

Acked-by: Boaz Harrosh <bharrosh@panasas.com>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:42 -06:00
James Bottomley
c9e86b8b1d [SCSI] mca_53c9x: remove driver
This driver depends on the deprecated NCR53C9X core and needs to be converted
to the esp_scsi core.

Acked-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:34 -06:00
Thomas Bogendoerfer
0bb67f1818 [SCSI] sun3x_esp: convert to esp_scsi
Converted sun3x_esp driver to use esp_scsi.c

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:02:33 -06:00
Tejun Heo
8ae732a91d [SCSI] make pcmcia directory use obj-y|m instead of subdir-y|m
subdir-y|m isn't supposed to contain modules or built-in components.
Change subdir-$(CONFIG_PCMCIA) to obj-$(CONFIG_PCMCIA).

Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:28:17 -06:00
Boaz Harrosh
caa1e8c321 [SCSI] seagate: Remove driver
- Apparently no one wonts this driver, and no one
    is willing to fix it for future changes to SCSI.
    So remove it, and if someone wants it in the future
    He can revive it with the needed fixes.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:22:36 -06:00
Boaz Harrosh
864a4675b2 [SCSI] psi240i: remove driver
The psi240i driver is still written for cmnd->request_buffer
as a char pointer to actual data. There was never any attempt
to use the scatterlist option.

  - remove all source files (3) from drivers/scsi
  - Remove from Makefile and Kconfig

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:22:36 -06:00
Matthew Wilcox
1ecd3902c6 [SCSI] fc4: remove this and all associated drivers
This code has been slowly rotting for about eight years.  It's currently
impeding a few SCSI cleanups, and nobody seems to have hardware to test
it any more.  I talked to Dave Miller about it, and he agrees we can
delete it.  If anyone wants a software FC stack in future, they can
retrieve this driver from git.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-17 21:53:55 -04:00
FUJITA Tomonori
09345f6505 [SCSI] add srp transport class
This adds srp transport class that works with ib_srp and ibmvscsi.

It creates only /sys/class/{srp_host,srp_remote_ports} and
srp_remote_ports has only "port_id" attribute.

viola:/sys/class/srp_remote_ports/port-0:1# ls
device  port_id  subsystem  uevent
viola:/sys/class/srp_remote_ports/port-0:1# cat port_id
4c:49:4e:55:58:20:56:49:4f:00:00:00:00:00:00:00

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:37:35 -04:00
Geert Uytterhoeven
9aea8cbf28 ps3: BD/DVD/CD-ROM Storage Driver
Add a BD/DVD/CD-ROM Storage Driver for the PS3:
  - Implemented as a SCSI device driver
  - Uses software scatter-gather with a 64 KiB bounce buffer as the hypervisor
    doesn't support scatter-gather

Cc: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-21 17:49:16 -07:00
Cornelia Huck
7689e82efd [SCSI] don't build scsi_dma_{map,unmap} for !HAS_DMA
With

 dma-mapping-prevent-dma-dependent-code-from-linking-on.patch

scsi fails to build on !HAS_DMA architectures:

drivers/built-in.o(.text+0x20af6): In function `scsi_dma_map':
: undefined reference to `dma_map_sg'
drivers/built-in.o(.text+0x20b5c): In function `scsi_dma_unmap':
: undefined reference to `dma_unmap_sg'

I split those functions out into a new file. Builds on s390 and i386.

Move scsi_dma_{map,unmap} into scsi_lib_dma.c which is only build if
HAS_DMA is set.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: James Bottomley <James.Bottomley@SteelEye.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14 19:28:10 -05:00
Geert Uytterhoeven
cde760856c [SCSI] CONFIG_SCSI_FD_8xx no longer exists
CONFIG_SCSI_FD_8xx no longer exists.

Apparently it was renamed to CONFIG_SCSI_SEAGATE, but the Makefile was
not correctly updated.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14 18:55:11 -05:00
Kars de Jong
45804fbb00 [SCSI] 53c700: Amiga Zorro NCR53c710 SCSI
New driver for Amiga Zorro bus NCR53c710 SCSI controllers, using the 53c700
SCSI core.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-17 16:19:14 -05:00
Kars de Jong
a16efc1cbf [SCSI] 53c700: Amiga 4000T NCR53c710 SCSI
New driver for the Amiga 4000T built-in NCR53c710 SCSI controller, using the
53c700 SCSI core.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-17 16:18:27 -05:00
Kars de Jong
506c7bbcd9 [SCSI] 53c700: m68k MVME16x NCR53C710 SCSI
New driver for the MVME16x NCR53C710 SCSI controller, using the 53c700 SCSI
core.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-17 16:17:40 -05:00
Kars de Jong
8276b58af4 [SCSI] 53c700: m68k BVME6000 NCR53C710 SCSI
New driver for the BVME6000 NCR53C710 SCSI controller, using the 53c700 SCSI
core.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-17 16:16:53 -05:00
James Bottomley
5bc65793cb [SCSI] Merge up to linux-2.6 head
Conflicts:

	drivers/scsi/jazz_esp.c

Same changes made by both SCSI and SPARC trees: problem with UTF-8
conversion in the copyright.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-30 23:57:05 -05:00
David S. Miller
89a4063e95 [SCSI] ESP: Kill SCSI_ESP_CORE and link directly just like jazz_esp
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-29 02:49:20 -07:00
Thomas Bogendoerfer
5ff2636677 [SCSI] jazz_esp: Converted to use esp_core.
Use new esp_scsi for JAZZ SCSI host adapter driver

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-29 02:49:19 -07:00
Christoph Hellwig
565bae6a4a [SCSI] 53c7xx: kill driver
It's been more than enough time now to try to get the new m68k drivers
into the tree.  Let's remove the old ones and we can remerge the new
glue once it's ready.  Given that there are patches to rename two out
of the three drivers in m68k CVS and all of them need a lot of
codingstyle love anyway that's probably the better strategy to begin
with.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kars de Jong <jongk@linux-m68k.org>
Cc: linux-m68k@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-27 12:52:29 -05:00
Thomas Bogendoerfer
352e921f0d [SCSI] jazz_esp: converted to use esp_core
Use new esp_scsi for JAZZ SCSI host adapter driver

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-22 11:12:22 -05:00
Linus Torvalds
4f7a307dc6 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (87 commits)
  [SCSI] fusion: fix domain validation loops
  [SCSI] qla2xxx: fix regression on sparc64
  [SCSI] modalias for scsi devices
  [SCSI] sg: cap reserved_size values at max_sectors
  [SCSI] BusLogic: stop using check_region
  [SCSI] tgt: fix rdma transfer bugs
  [SCSI] aacraid: fix aacraid not finding device
  [SCSI] aacraid: Correct SMC products in aacraid.txt
  [SCSI] scsi_error.c: Add EH Start Unit retry
  [SCSI] aacraid: [Fastboot] Panics for AACRAID driver during 'insmod' for kexec test.
  [SCSI] ipr: Driver version to 2.3.2
  [SCSI] ipr: Faster sg list fetch
  [SCSI] ipr: Return better qc_issue errors
  [SCSI] ipr: Disrupt device error
  [SCSI] ipr: Improve async error logging level control
  [SCSI] ipr: PCI unblock config access fix
  [SCSI] ipr: Fix for oops following SATA request sense
  [SCSI] ipr: Log error for SAS dual path switch
  [SCSI] ipr: Enable logging of debug error data for all devices
  [SCSI] ipr: Add new PCI-E IDs to device table
  ...
2007-05-05 13:30:44 -07:00
David S. Miller
cd9ad58d40 [SCSI] SUNESP: Complete driver rewrite to version 2.0
Major features:

1) Tagged queuing support.
2) Will properly negotiate for synchronous transfers even on
   devices that reject the wide negotiation message, such as
   CDROMs
3) Significantly lower kernel stack usage in interrupt
   handler path by elimination of function vector arrays,
   replaced by a top-level switch statement state machine.
4) Uses generic scsi infrastructure as much as possible to
   avoid code duplication.
5) Automatic request of sense data in response to CHECK_CONDITION
6) Portable to other platforms using ESP such as DEC and Sun3
   systems.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27 00:26:46 -07:00
James Bottomley
840c2835a1 [SCSI] make scsi_wait_scan always modular
Currently scsi_wait_scan is only built modular if SCSI is modular.
However, it's perfectly possible for a built in SCSI still to have
modular drivers and thus need scsi_wait_scan as a module.  Therefore,
scsi_wait_scan should always be built as a module (unless the kernel
doesn't support modules).

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-20 10:48:23 -05:00
Thomas Bogendoerfer
c27d85f3f3 [SCSI] SNI RM 53c710 driver
This patch adds a SCSI driver for the onboard 53c710 chip of some
SNI RM machines.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-13 13:49:58 -06:00
FUJITA Tomonori
0e5d030bef [SCSI] scsi tgt: IBM eServer i/pSeries virtual SCSI target driver
This is IBM Virtual SCSI target driver for tgt. The driver is based on
the original ibmvscsis driver:

http://lkml.org/lkml/2005/10/17/99

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Santiago Leon <santil@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-03 09:28:01 -06:00