Commit graph

486 commits

Author SHA1 Message Date
Ludovic Desroches
647f8d94a4 ARM: at91: add gpio suspend/resume support when using pinctrl
gpio suspend/resume and wakeup sources where not managed when using pinctrl so
it was impossible to wake up the system with a gpio.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-14 09:37:42 +01:00
Linus Torvalds
a8f3740feb arm-soc: device tree conversions
These are device tree conversions for a number of platforms,
 with the intention of turning code from board files into
 device tree descriptions. Notable changes are:
 
 * davinci bindings for pinctrl, MTD, RTC, watchdog and i2c
 * nomadik bindings for all devices, removing the board files
 * bcm2835 bindings for mmc and i2c
 * tegra bindings for hdmi, keyboard, audio, as well as some updates
 * at91 bindings for hardware ecc and for devices on RM9200
 * mxs bindings for cfa100xx
 * sunxi support for Miniand Hackberry board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUSUyRWCrR//JCVInAQKjPg/6AlHFCcLd2ZNjbp/br9uY9VGDTXC8XBJP
 aIlEIujOi8PZUzyOK+RfAbMtI9EYlFIM1angoQE2x4E8Wf/5bh0zMD1qdsndhceV
 acBGcUug4hv1OBFU+VZNNHu+WzcbiWIwNPXGksIOZpgkYJ+6P2BqVdv/HgwdKiJD
 /Qo5iO6qNeYW387DcVXY5GoDhof56WtsUkb7VrXn5z/ewTq+xu+GuDaAtdsKjHyW
 hjsAjv6BCCf4fKjxGVhePdVqMtTv3pwVQO0B3DuXdNLESecpTobin/jc+oCSY9Yy
 LI21KOjjwYYQahwVsNp2sMcfmbVzeOyHqITF/Qt11OY4YtPbf4OBPM61TDqIYlJ3
 0PoBtm4AL24wiKSCSiQNn6k7woW531r65lqpGOKYoglGYo50gCvxzsBZYkGzpEkV
 7JmUm76Ohppk5QDhO/pIQBFE783IA9rjMg+aPc0SDDwrr499iGBZ2nM7s75MThkm
 EjHpf4O8JYsXj9KANo9D5cL4zupdnH1jm+qhD8zl9w7EBQXJ6zXy38FaUy04Lgr1
 NkHEtwlAeNJ0W6qpu89cNZEaerzeF6uzEFgp06dMwy8X+/NTCLXM1kCJC+mytW83
 aFYDlQedqnXeh9fDCrkbYDA8HGKZm0ENxoLOx40iqF761h8cBfhfCIEObClKhXy2
 mGBl4NF5ZAU=
 =NLEa
 -----END PGP SIGNATURE-----

Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree conversions from Arnd Bergmann:
 "These are device tree conversions for a number of platforms, with the
  intention of turning code from board files into device tree
  descriptions.  Notable changes are:

   - davinci bindings for pinctrl, MTD, RTC, watchdog and i2c

   - nomadik bindings for all devices, removing the board files

   - bcm2835 bindings for mmc and i2c

   - tegra bindings for hdmi, keyboard, audio, as well as some updates

   - at91 bindings for hardware ecc and for devices on RM9200

   - mxs bindings for cfa100xx

   - sunxi support for Miniand Hackberry board"

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (72 commits)
  Revert "sunxi: a10-cubieboard: Add user LEDs to the device tree"
  Revert "sunxi: a13-olinuxino: Add user LED to the device tree"
  clk: tegra: initialise parent of uart clocks
  ARM: tegra: remove clock-frequency properties from serial nodes
  clk: tegra: fix driver to match DT binding
  clk: tegra: local arrays should be static
  clk: tegra: Add missing spinlock for hclk and pclk
  clk: tegra: Implement locking for super clock
  clk: tegra: fix wrong clock index between se to sata_cold
  sunxi: a13-olinuxino: Add user LED to the device tree
  ARM: davinci: da850 DT: add support for machine reboot
  ARM: davinci: da850: add wdt DT node
  ARM: davinci: da850: add DT node for I2C0
  ARM: at91: at91sam9n12: add DT parameters to enable PMECC
  ARM: at91: at91sam9x5: add DT parameters to enable PMECC
  ARM: at91: add EMAC bindings to RM9200 DT
  ARM: at91: add SSC bindings to RM9200 DT
  ARM: at91: add MMC bindings to RM9200 DT
  ARM: at91: Animeo IP: enable watchdog support
  ARM: nomadik: fix OF compilation regression
  ...
2013-02-21 15:38:49 -08:00
Linus Torvalds
7ae1c76ee5 arm-soc: pin muxing for sh-mobile
This is another cleanup series, containing the move of the Renesas
 SH-Mobile pin controller code from arch/arm/mach-shmobile over to the
 generic pinctrl subsystem, changing it over to the common interfaces in
 the process.
 
 Based on agreement between Olof, Paul Mundt, Linus Walleij and Simon,
 we're merging this large branch of pinctrl conversion through arm-soc,
 even though it contains the corresponding conversions for arch/sh. Main
 reason for this is tight dependencies (that will now mostly be broken)
 between the arch/sh and mach-shmobile implementations.
 
 There will be more of this in 3.10 to do device-tree bindings, but this
 is the initial conversion.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUSaEl2CrR//JCVInAQI82RAAjpctH6C0WSrbGU0JvK37UARADhIEExBU
 DkmKV7i6yZHMZ11L0u2W5DvO+VPMN/hyIQlHmIJzxXQx/yGysnbshgapRkLKNXPx
 BNOrswOHAuILxxl78b6Wi5DwR0AgLNz2uC8jPFo7FWKjIEIFMV6XTtotc1Je51Cy
 yTetSIuHjWAYYb2cGcYCoN2DLXq6d+RA1vXebyAWOCfZJqtF0DhMAw14gDuxjyMb
 2y5cBZte1ym/mSYtg5JiJGiSnhcl3y5QzUSgIbFJIhnS4DQgztnVXnn5/iAaw0/i
 5f/9brGaVsUYlugZ5zA8NY2UUAiwlilN4W8M42Fe5rOJ6bPrwSbSWkFdwEZpZsMU
 kpV4urrwWVNJAJFCQZx+Cioh1zVxyPdNXtwOwOO73kwf7jSYwr+Kc0K//emw6iOp
 sCUzTHupgL+TWPlYm5SCG8UcM3Cj8TVxmPJ84n/TqhEiejT+lYHMQs6wVNz/xyMX
 +1eX+ZAh+gshY/9tnAMDyYDJTFhNJ33yraKW3a/V/ve/3eaf8yJ8vCKaL1ZqN7jt
 XXbZE26N/Mw8/zazMxfq3NHXpNAiDVVUmMcA8UBUwrRWsVIE/tu4SjmnpFN8BI/j
 L9NsscehKZEZjyZ2CW4NiPx4VsGncStCsMcYkwk4CMHs5k7lgv0+ptRVekDX8COF
 oVodlV4ua3w=
 =U+ce
 -----END PGP SIGNATURE-----

Merge tag 'sh-pinmux' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull sh-mobile pinctrl conversion from Arnd Bergmann:
 "This is another cleanup series, containing the move of the Renesas
  SH-Mobile pin controller code from arch/arm/mach-shmobile over to the
  generic pinctrl subsystem, changing it over to the common interfaces
  in the process.

  Based on agreement between Olof, Paul Mundt, Linus Walleij and Simon,
  we're merging this large branch of pinctrl conversion through arm-soc,
  even though it contains the corresponding conversions for arch/sh.
  Main reason for this is tight dependencies (that will now mostly be
  broken) between the arch/sh and mach-shmobile implementations.

  There will be more of this in 3.10 to do device-tree bindings, but
  this is the initial conversion."

* tag 'sh-pinmux' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (81 commits)
  sh-pfc: sh_pfc_probe() sizeof() fix
  sh-pfc: Move sh_pfc.h from include/linux/ to driver directory
  sh-pfc: Remove pinmux_info definition
  sh: Remove unused sh_pfc_register_info() function
  sh: shx3: pinmux: Use driver-provided pinmux info
  sh: sh7786: pinmux: Use driver-provided pinmux info
  sh: sh7785: pinmux: Use driver-provided pinmux info
  sh: sh7757: pinmux: Use driver-provided pinmux info
  sh: sh7734: pinmux: Use driver-provided pinmux info
  sh: sh7724: pinmux: Use driver-provided pinmux info
  sh: sh7723: pinmux: Use driver-provided pinmux info
  sh: sh7722: pinmux: Use driver-provided pinmux info
  sh: sh7720: pinmux: Use driver-provided pinmux info
  sh: sh7269: pinmux: Use driver-provided pinmux info
  sh: sh7264: pinmux: Use driver-provided pinmux info
  sh: sh7203: pinmux: Use driver-provided pinmux info
  ARM: shmobile: sh73a0: Use driver-provided pinmux info
  ARM: shmobile: sh7372: Use driver-provided pinmux info
  ARM: shmobile: r8a7779: Use driver-provided pinmux info
  ARM: shmobile: r8a7740: Use driver-provided pinmux info
  ...
2013-02-21 15:00:16 -08:00
Linus Torvalds
b24174b0cb arm-soc: non-critical bug fixes
Bug fixes that did not make it into v3.8, mostly because they were not
 considered important enough, and in some cases because bugs only show
 up in combination with other patches destined for 3.9.
 This includes a few larger patches for GPIO on the Marvell PXA platform
 and a lot of Samsung specific bug fixes, as well as a series from Arnd
 to fix older build warnings.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUSUyI2CrR//JCVInAQKBlRAAwOc8vTQl6UHciwibXXdMfL83hH0YNwu8
 CFjnzHpvDX0YUQvW9fFPSq64CejhQumgaJYq3Te7mZW50H4hqGNqgFojPZy+2yn1
 eEIjvNrES9Sp2aJG7iT1Q9BqvWVis736W7z8kTJ6szcG5e3KGZoFNdAl9izeiHtv
 CTR9o4+XVY00eKbafVU+KJ4+/ZdptEnIWiQsg1gzImrRw/PosL/lgjYYCeRXb866
 W7qltcCdwILA8+5x4KcK9CDAQbt+G2lLsmHzH4OZ2gjZmKzvZcxTOfXxdA9439Ew
 jol5rkSAXiWcsgB4kzSx7sMGyMNim1qAu9FmhUdYqSc8UBGnGcns/QOLiGZxq9uS
 9UTkInWC9Kcy8vSIIbDBvTpEZbbA5arAuEObK2eEPWntp/UgmGiSJaQmYHY+u9yd
 BokmfSLc5g+jnQBS/H//nvPkA0ZlpknGZAovyRpjzZzYiF3LiBtsIMagYH2jVwzn
 bc633NYo5cNO9DSO8mXSG6LUJ0X5d2HrTkg7J5x9GgOr1xDaH0rFjAdCZFXSTSKu
 LVy3xehuXcHK4zbEvtgq7cjKyeIDpW0psPCXjKz4Fsreq6waPN88fHx9mVnoanII
 JY9Lq8xW/2CH8uEdPyKMss/SXdzsVIm8bR3veS3TgqZa/2maMj/EkdGmPISUUjBY
 JN48myQQSZM=
 =BbV4
 -----END PGP SIGNATURE-----

Merge tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull non-critical ARM SoC bug fixes from Arnd Bergmann:
 "Bug fixes that did not make it into v3.8, mostly because they were not
  considered important enough, and in some cases because bugs only show
  up in combination with other patches destined for 3.9.  This includes
  a few larger patches for GPIO on the Marvell PXA platform and a lot of
  Samsung specific bug fixes, as well as a series from Arnd to fix older
  build warnings."

* tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
  ARM: SPEAr13xx: Enable CONFIG_ARCH_HAS_CPUFREQ
  ARM: imx: MACH_MX31ADS_WM1133_EV1 needs REGULATOR_WM8350
  scripts/sortextable: silence script output
  ARM: s3c: i2c: add platform_device forward declaration
  ARM: mvebu: allow selecting mvebu without Armada XP
  ARM: pick Versatile by default for !MMU
  ARM: integrator: fix build with INTEGRATOR_AP off
  ARM: integrator/versatile: fix NOMMU warnings
  ARM: sa1100: don't warn about mach/ide.h
  ARM: shmobile: fix defconfig warning on CONFIG_USB
  ARM: w90x900: fix legacy assembly syntax
  ARM: samsung: fix assembly syntax for new gas
  ARM: disable virt_to_bus/virt_to_bus almost everywhere
  ARM: dts: Correct pin configuration of SD 4 for exynos4x12-pinctrl
  ARM: SAMSUNG: Silence empty switch warning in fimc-core.h
  ARM: SAMSUNG: Silence empty switch warning in sdhci.h
  ARM: msm: proc_comm_boot_wait should not be __init
  arm: vt8500: Update MAINTAINERS entry for arch-vt8500
  ARM: integrator: ensure ap_syscon_base is initialised when !CONFIG_MMU
  ARM: S5PV210: Fix early uart output in fifo mode
  ...
2013-02-21 14:54:55 -08:00
Linus Torvalds
06991c28f3 Driver core patches for 3.9-rc1
Here is the big driver core merge for 3.9-rc1
 
 There are two major series here, both of which touch lots of drivers all
 over the kernel, and will cause you some merge conflicts:
   - add a new function called devm_ioremap_resource() to properly be
     able to check return values.
   - remove CONFIG_EXPERIMENTAL
 
 If you need me to provide a merged tree to handle these resolutions,
 please let me know.
 
 Other than those patches, there's not much here, some minor fixes and
 updates.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlEmV0cACgkQMUfUDdst+yncCQCfbmnQZju7kzWXk6PjdFuKspT9
 weAAoMCzcAtEzzc4LXuUxxG/sXBVBCjW
 =yWAQ
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core patches from Greg Kroah-Hartman:
 "Here is the big driver core merge for 3.9-rc1

  There are two major series here, both of which touch lots of drivers
  all over the kernel, and will cause you some merge conflicts:

   - add a new function called devm_ioremap_resource() to properly be
     able to check return values.

   - remove CONFIG_EXPERIMENTAL

  Other than those patches, there's not much here, some minor fixes and
  updates"

Fix up trivial conflicts

* tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits)
  base: memory: fix soft/hard_offline_page permissions
  drivercore: Fix ordering between deferred_probe and exiting initcalls
  backlight: fix class_find_device() arguments
  TTY: mark tty_get_device call with the proper const values
  driver-core: constify data for class_find_device()
  firmware: Ignore abort check when no user-helper is used
  firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER
  firmware: Make user-mode helper optional
  firmware: Refactoring for splitting user-mode helper code
  Driver core: treat unregistered bus_types as having no devices
  watchdog: Convert to devm_ioremap_resource()
  thermal: Convert to devm_ioremap_resource()
  spi: Convert to devm_ioremap_resource()
  power: Convert to devm_ioremap_resource()
  mtd: Convert to devm_ioremap_resource()
  mmc: Convert to devm_ioremap_resource()
  mfd: Convert to devm_ioremap_resource()
  media: Convert to devm_ioremap_resource()
  iommu: Convert to devm_ioremap_resource()
  drm: Convert to devm_ioremap_resource()
  ...
2013-02-21 12:05:51 -08:00
Linus Torvalds
8a3a11f91d These are the main pinctrl changes for the v3.9 merge window:
- Grabbing of default pinctrl handles from the device core.
   These are the hunks hitting drivers/base. All is ACKed by
   Greg, after a long discussion about different alternatives.
 
 - Some stuff also touches the MFD and ARM SoC trees, this has
   been coordinated and ACKed.
 
 - New drivers for:
 
   - The Tegra 114 sub-SoC
   - Allwinner sunxi
   - New ABx500 driver and sub-SoC drivers for AB8500,
     AB8505, AB9540 and AB8540.
 
 - Make it possible for hogged pins to enter a sleep mode,
   and make it possible for drivers to control that mode.
 
 - Various clean-up, extensions and device tree support to
   various pin controllers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJRHqYQAAoJEEEQszewGV1zsBwQAIDM3MYW6sJcNd+Ekcli8dqv
 2dpzs3c4R9j3Ea0IUS3YRrk8pXeKIw6Ko0ifzFFLPF6s7kuBv1VaNdx7U8wbtoCj
 ZprMmvWTJZvD4zP8WsT9TIgGcCiQQnHbz8jyucGgMUNuwt/S0f5FeQc2mQtZGklT
 yuZ0z9eHQjqkX12ijI+lO5RI+Sduvd/FQgGIbhfoyBEMFwklTq3ePvmH5MUUMzXb
 2uNSvACbnBUkvZlYLGlr5J5w6euqX7oxUnHEf2nBt2L8d0zgP2WC2tonLLwEtzD0
 jcl3NA57eJa42PoQlNL6jZLz0kNWcGRfurstUO7UiFJ0lSxiwjYLGBqB5vfEdjAV
 wg0BokJ1vigrzUUdNPEIh6QFSrXs0I76oAMmHbXxJjnEPwahn5forYpU3G6GmCy4
 ZsTMJgXqrJeolqcDY583M31Lx0lu8/OwMjG6OBnDRCbhzq3bJgF/Nhu9nzmShFN7
 3z+NK0zBzECylV31eygyoU4SUQduYrV2YEav0QNRiZWfi3HBNcEiZGBJxUvv7+cc
 lYox6CPLCZN0Xn9y2Jt3uLNeivdjQLAJRPWnLaFtq0i4EjqpTtQnzw5LLsIqhumc
 9BhhoZ6ktPnp9CK6gQOy+dwJPiigCrqog5oCqLArI0UvRrE7BNkHrjRay8PkMqRC
 Fl4x7eR3fVfENExogGac
 =SQ9W
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pinctrl changes from Linus Walleij:
 "These are the main pinctrl changes for the v3.9 merge window.  The
  most interesting change by far is how the device core grabs pinctrl
  default handles avoiding the need to stick boilerplate into driver
  consumers.

   - Grabbing of default pinctrl handles from the device core.  These
     are the hunks hitting drivers/base.  All is ACKed by Greg, after a
     long discussion about different alternatives.

   - Some stuff also touches the MFD and ARM SoC trees, this has been
     coordinated and ACKed.

   - New drivers for:
     - The Tegra 114 sub-SoC
     - Allwinner sunxi
     - New ABx500 driver and sub-SoC drivers for AB8500, AB8505, AB9540
       and AB8540.

   - Make it possible for hogged pins to enter a sleep mode, and make it
     possible for drivers to control that mode.

   - Various clean-up, extensions and device tree support to various pin
     controllers."

* tag 'pinctrl-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (68 commits)
  pinctrl: tegra: add clfvs function to Tegra114 support
  pinctrl: generic: rename input schmitt disable
  pinctrl/pinconfig: add debug interface
  pinctrl: samsung: remove duplicated line
  ARM: ux500: use real AB8500 IRQ numbers instead of virtual ones
  ARM: ux500: remove irq_base property from platform_data
  pinctrl/abx500: use direct IRQ defines
  pinctrl/abx500: replace IRQ offsets with table read-in values
  pinctrl/abx500: move IRQ handling to ab8500-core
  pinctrl: exynos5440: remove erroneous __init
  pinctrl/abx500: adjust offset for get_mode()
  pinctrl/abx500: add Device Tree support
  pinctrl/abx500: align GPIO cluster boundaries
  pinctrl/abx500: prevent error path from corrupting returning error
  pinctrl: sunxi: add of_xlate function
  pinctrl/lantiq: fix pin number in ltq_pmx_gpio_request_enable
  pinctrl/lantiq: add functionality to falcon_pinconf_dbg_show
  pinctrl/lantiq: fix pinconfig parameters
  pinctrl/lantiq: one of the boot leds was defined incorrectly
  pinctrl/lantiq: only probe available pad controllers
  ...
2013-02-20 09:23:30 -08:00
Magnus Damm
8c43fcc780 sh-pfc: sh_pfc_probe() sizeof() fix
Fix sizeof() usage in sh-pfc/core.c to allocate space
for the full data structure instead of a pointer.

Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-02-16 10:58:50 +09:00
Rhyland Klein
ade158eb53 pinctrl: tegra: add clfvs function to Tegra114 support
This patch adds the definition for the cldvfs function for Tegra114 pinctrl
support. This is based on work by Pritesh Raithatha.

Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-15 20:22:39 +01:00
Haojian Zhuang
ea27c39617 pinctrl: generic: rename input schmitt disable
Rename PIN_CONFIG_INPUT_SCHMITT_DISABLE to
PIN_CONFIG_INPUT_SCHMITT_ENABLE. It's used to make it more generialize.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-15 09:52:29 +01:00
Olof Johansson
cae617b64c Merge branch 'fixes-for-3.9' into next/fixes-non-critical
This is a branch of fixes that originally were scheduled for 3.8 but
due to the request from Linus to hold back on all but the most critical
of fixes, we're re-queueing them for 3.9 here.

* fixes-for-3.9:
  ARM: dts: imx6: fix fec ptp clock slow 10 time
  ARM: highbank: mask cluster id from cpu_logical_map
  ARM: scu: mask cluster id from cpu_logical_map
  ARM: scu: add empty scu_enable for !CONFIG_SMP
  ARM: at91/at91sam9x5.dtsi: fix usart3 TXD
  ARM: at91: at91sam9x5: fix usart3 pinctrl name
  ARM: EXYNOS: Fix crash on soft reset on EXYNOS5440
  ARM: dts: fix tick and alarm irq numbers for exynos5440
  ARM: dts: fix compatible value for exynos pinctrl
  ARM: dts: Fix compatible value of pinctrl module on EXYNOS5440
  ARM: S3C24XX: fix uninitialized variable warning
  mfd/vexpress: vexpress_sysreg_setup must not be __init
  ARM: ux500: Fix u9540 booting issues
  arm: mvebu: i2c come back in defconfig
  arm: plat-orion: fix printing of "MPP config unavailable on this hardware"
  Dove: activate GPIO interrupts in DT
  ARM: ux500: add spin_unlock(&master_lock).
  ARM: ux500: Disable Power Supply and Battery Management by default

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-02-12 15:03:55 -08:00
Laurent Meunier
6f9e41f4e6 pinctrl/pinconfig: add debug interface
This update adds a debugfs interface to modify a pin configuration
for a given state in the pinctrl map. This allows to modify the
configuration for a non-active state, typically sleep state.
This configuration is not applied right away, but only when the state
will be entered.

This solution is mandated for us by HW validation: in order
to test and verify several pin configurations during sleep without
recompiling the software.

Signed-off-by: Laurent Meunier <laurent.meunier@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-10 21:11:54 +01:00
Jingoo Han
007cd69433 pinctrl: samsung: remove duplicated line
This patch removes duplicated line of samsung_pinctrl_register(),
because the number of pins is redundantly assigned twice.

Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-10 20:16:36 +01:00
Linus Walleij
43a255dba1 pinctrl/abx500: use direct IRQ defines
Make it harder to do mistakes by introducing the actual
defined ABx500 IRQ number into the IRQ cluster definitions.
Deduct cluster offset from the GPIO offset to make each
cluster coherent.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-10 15:48:43 +01:00
Lee Jones
a6a16d274e pinctrl/abx500: replace IRQ offsets with table read-in values
The ABx500 GPIO controller used to provide a set of virtual contiguous
IRQs for use by sub-devices, but they have been removed after a request
from Mainline Maintainers. Now the AB8500 core driver deals with almost
all IRQ related issues instead.

The ABx500 GPIO driver is now only used to convert between GPIO and IRQ
numbers which is actually quite difficult, as the ABx500 GPIO's
associated IRQs are clustered together throughout the interrupt number
space at irregular intervals. To solve this quandary, we have placed the
read-in values into the existing cluster information table to use during
conversion.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
[Moved irq_base removal into this patch]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-10 15:44:33 +01:00
Lee Jones
ac652d7941 pinctrl/abx500: move IRQ handling to ab8500-core
In its current state the gpio-ab8500 driver looks after some GPIO
lines found on the AB8500 MFD chip. It also controls all of its
own IRQ handling for these GPIOs by inventing some virtual IRQs
and handing those out to sub-devices. There has been quite a bit
of controversy over this and it was a contributing factor to the
driver being marked as BROKEN in Mainline.

The reason for adopting this method was due to added complexity
in the hardware. Unusually, each GPIO has two separate IRQs
associated with it, one for a rising and a different one for a
falling interrupt. Using this method complicates matters further
because the GPIO IRQs are actually sandwiched between a bunch
of IRQs which are handled solely by the AB8500 core driver.

The best way for us to take this forward is to get rid of the
virtual IRQs and only hand out the rising IRQ lines. If a
sub-driver wishes to request a falling interrupt, they can do
so by requesting a rising line in the normal way. They just
have to add IRQ_TYPE_EDGE_FALLING or IRQ_TYPE_EDGE_BOTH, if
they require both in the flags. Then if a falling IRQ is
triggered, the AB8500 core driver will know how to handle the
added complexity accordingly. This should greatly simply things.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
[Augment to keep irq_base for a while (removed later)]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-10 15:14:13 +01:00
Linus Walleij
7ac63ac61d Merge branch 'allwinner-sunxi' into devel 2013-02-08 14:26:49 +01:00
Linus Walleij
879029c701 pinctrl: exynos5440: remove erroneous __init
This removes the __init notation from some of the
the exynos 5440 pin controller set-up functions. These
functions are called from probe() and as such may be
discarded before probe() completes.

Cc: Thomas Abraham <thomas.abraham@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-07 19:43:20 +01:00
Linus Walleij
a950cb741b pinctrl/abx500: adjust offset for get_mode()
The set_mode() and get_mode() functions in the abx500 were
not mirrored, leading to the wrong GPIO control bits being
read out.

Cc: Lee Jones <lee.jones@linaro.org>
Reported-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-07 17:26:53 +01:00
Lee Jones
f30a3839b3 pinctrl/abx500: add Device Tree support
This patch will allow the ABX500 Pinctrl driver to be probed when
Device Tree is enabled with an appropriate node contained.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-06 22:38:48 +01:00
Lee Jones
b9fab6e45d pinctrl/abx500: align GPIO cluster boundaries
Not quite sure how this ever worked. In ab8500_gpio_to_irq() the
GPIO for conversion is passed through as the second argument. If
GPIO13, which is a valid GPIO for IRQ functionality, was received;
it would be rejected by the following guard:

    GPIO_IRQ_CLUSTER(5, 12, 0); /* GPIO numbers start from 1 */

    if (offset >= cluster->start && offset <= cluster->end)
        /* Valid GPIO for IRQ use */

Signed-off-by: Lee Jones <lee.jones@linaro.org>
[Augmented to account for off-by-one problem]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-06 22:38:40 +01:00
Lee Jones
fa1ec996ac pinctrl/abx500: prevent error path from corrupting returning error
Prior to this patch abx500_gpio_probe() would return the return-value
of gpiochip_remove() during its error patch regardless of what the
actual failure was. So as long as gpiochip_remove() succeeded, probe()
would look like it succeeded too.

This patch ensures the correct error value is returned and that
mutex_destroy() is invoked if gpiochip_add_pin_range() were to fail.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-06 22:38:31 +01:00
Maxime Ripard
a0d72094f0 pinctrl: sunxi: add of_xlate function
Since the pin controller of sunxi chips is represented as a
single bank in the driver.

Since this is neither convenient nor represented that way in the
datasheets, define a custom of_xlate function with the layout
<bank pin flag>

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-05 17:32:29 +01:00
John Crispin
d8a7c1f134 pinctrl/lantiq: fix pin number in ltq_pmx_gpio_request_enable
The mapping logic inside ltq_pmx_gpio_request_enable() was
broken. This only effected Falcon SoC.

Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-05 16:17:26 +01:00
John Crispin
c58bdc36bc pinctrl/lantiq: add functionality to falcon_pinconf_dbg_show
The current code only has a stub for falcon_pinconf_dbg_show.
This patch adds proper functionality.

Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-05 16:17:25 +01:00
John Crispin
77ef406272 pinctrl/lantiq: fix pinconfig parameters
The Falcon driver only defined the pinconf parameters but
did not pass them properly to the underlying api.

Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-05 16:17:25 +01:00
John Crispin
41228b7b33 pinctrl/lantiq: one of the boot leds was defined incorrectly
On the Falcon SoC the bootleds are located on pins 9->14.

Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-05 16:17:24 +01:00
John Crispin
a8ae367f40 pinctrl/lantiq: only probe available pad controllers
The template falcon.dtsi lists all 6 pad controllers that
can be loaded. Only probe those that have status = "okay";
inside the dts file.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-05 16:17:24 +01:00
John Crispin
9338628737 pinctrl/lantiq: the pinconf OD parameter argument was ignored
When setting the OpenDrain bit we should really honour the
argument passed inside the devicetree.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-05 16:17:23 +01:00
John Crispin
6360350cbc pinctrl/lantiq: add output pinconf parameter
While converting the boards inside OpenWrt to OF I noticed
that the we are missing a pinconf parameter to set a pin
to output.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-05 16:17:22 +01:00
John Crispin
3a6b04ca33 pinctrl/lantiq: add pin_config_group_set support
While converting all the boards supported by OpenWrt to OF
I noticed that this feature is missing. Adding it makes the
devicetrees more readable.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-05 16:17:22 +01:00
John Crispin
7541083fc4 pinctrl/lantiq: faulty bit inversion
The logic of the OD bit was inverted when calling the
pinconf get method.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-05 16:17:21 +01:00
John Crispin
362ba3cfb4 pinctrl/lantiq: pinconf uses port instead of pin
The XWAY pinctrl driver invalidly uses the port and not the pin
number to work out the registers and bits to be set for the
opendrain and pullup/down resistors.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-05 16:17:21 +01:00
Barry Song
228f1ce9b8 pinctrl: sirf: replace of_gpio_simple_xlate by sirf specific of_xlate
the default of_gpio_simple_xlate() will make us fail while getting gpios
bigger than 32 by of_get_named_gpio() or related APIs.
this patch adds a specific of_xlate callback for sirf gpio_chip and fix
the problem.

Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-05 15:27:39 +01:00
Kukjin Kim
a1ed26703e pinctrl: exynos: change PINCTRL_EXYNOS option
Since pinctrl-exynos can support exynos4 and exynos5 so changed
the option name to PINCTRL_EXYNOS for more clarity.

Cc: Thomas Abraham <Thomas.abraham@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-05 15:27:39 +01:00
Lee Jones
d41e35c364 pinctrl/abx500: destroy mutex if returning early due to error
Current failure path neglects to mutex_destroy() before returning
an error due to an invalid parameter or an error received from
gpiochip_add(). This patch aims to remedy that behaviour.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-05 13:54:24 +01:00
Lee Jones
83b423c885 pinctrl/abx500: beautify the ABX500 pin control driver
This patch provides some superficial changes to the driver to
aid with readability and maintainability. We're mostly fixing
things like white-space errors, spreading out code which as
been clumped together impeding readability and comment layout,
such as using the new "/**" comment start for function headers
etc. No code semantics were harmed in the making of this patch.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-05 13:54:23 +01:00
Lee Jones
1abeebeaa5 pinctrl/abx500: replace incorrect return value
Currently in the empty abx500_pin_config_get() function, we're
returning -EINVAL, with a comment stating that the reason for the
failure is that the function isn't implemented yet. Well there's
a proper return code for that. If we use it, we can do away with
the comment too, as it would be implied.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-05 13:54:22 +01:00
Lee Jones
49dcf086e4 pinctrl/abx500: use the BIT() macro where appropriate
The BIT() macro provides a simple and easy to read way of
obtaining bit offsets into things like masks and hardware
registers. In this patch we're simply replacing all
instances of '1 << x' with 'bit(x)'.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-05 13:54:22 +01:00
Patrice Chotard
a8f96e4178 pinctrl/abx500: add AB8540 sub-driver
Add AB8540 sub driver to the ABx500 family, pins, pin groups and
gpio range.

As the pin controller (also the ABx500 controllers) is an
inherent part of the SoC and will prevent boot if not
available, select this from the Ux500 SoC Kconfig.

Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-05 13:54:21 +01:00
Patrice Chotard
09dbec3f74 pinctrl/abx500: add AB9540 sub-driver
Add AB9540 sub driver to the ABx500 family, pins, pin groups and
gpio range.

As the pin controller (also the ABx500 controllers) is an
inherent part of the SoC and will prevent boot if not
available, select this from the Ux500 SoC Kconfig.

Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-05 13:54:20 +01:00
Patrice Chotard
1aa2d8d405 pinctrl/abx500: add AB8505 sub-driver
Add AB8505 sub driver to the ABx5x family.

As the pin controller (also the ABx500 controllers) is an
inherent part of the SoC and will prevent boot if not
available, select this from the Ux500 SoC Kconfig.

Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-05 13:54:19 +01:00
Olof Johansson
604d11d991 Linux 3.8-rc6
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQEcBAABAgAGBQJRCxWdAAoJEHm+PkMAQRiG3bAH/28D2NbRLIDo6QIzk3seCCh3
 A6vqDWbX671JRa0RO38DrWhqv6L/EisvjNZMVxBNaN635+3+yC7wsKziXYxA4+AL
 Ef9JISiwXykRWwrC8Q34YBWfWgeFTmaau71IRv45x2OTwiijd6cvjXhLDrOhHEGL
 rdAGJxIdBOfuASw1zpn9PxzfAtg1j/FGP03B4yy+JFhYzuDp3pvnDIysAnXefLml
 UheuBELdNf8Jx7NtW80PTa+TQtruWPC8otoiJevV4TrAWmAOctJiM1izL+VOZqqD
 I/v5aGf9mCN+cxLq06imwgEHWmP1I7yDdjjTHrr4wwIMws1vg8PNsJqG3AsPcwM=
 =dR8S
 -----END PGP SIGNATURE-----

Merge tag 'v3.8-rc6' into next/dt

Linux 3.8-rc6
2013-02-04 22:59:22 -08:00
Maxime Ripard
9f5b6b30f9 ARM: pinctrl: sunxi: Add the pinctrl pin set for Allwinner A10
Since the Allwinner SoCs variants don't have the same set of pins to
handle, we need to declare the pin ranges available.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-01 10:45:34 +01:00
Maxime Ripard
ae1575f711 pinctrl: sunxi: Document sun5i pins functions
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-01 10:44:21 +01:00
Patrice Chotard
3c93799378 pinctrl/abx500: add AB8500 sub-driver
This adds a subdriver for the AB8500 pinctrl portions.
As the pin controller (also the ABx500 controllers) is an
inherent part of the SoC and will prevent boot if not
available, select this from the Ux500 SoC Kconfig.

Acked-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-30 20:42:40 +01:00
Patrice Chotard
0493e64930 pinctrl: add abx500 pinctrl driver core
This adds the AB8500 core driver, which will be utilized by
the follow-on drivers for different ABx500 variants.
Sselect the driver from the DBX500_SOC, as this chip is
powering and clocking that SoC.

Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-30 20:42:14 +01:00
Sachin Kamat
2917e8338c pinctrl: core: Make pinctrl_release static
'pinctrl_release' is used only in this file. Hence make it static.

Without this patch we get the following sparse error:
drivers/pinctrl/core.c:815:6: warning:
symbol 'pinctrl_release' was not declared. Should it be static?

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-30 11:00:58 +01:00
Maxime Ripard
08e9e614ca ARM: sunxi: gpio: Add Allwinner SoCs GPIO drivers
The IP responsible for the muxing on the Allwinner SoCs are also
handling the GPIOs on the system. This patch adds the needed driver that
relies on the pinctrl driver for most of its operations.

The number of pins available for GPIOs operations are already declared
in the pinctrl driver, we only need to probe a generic driver to handle
the banks available for each SoC.

This driver has been tested on a A13-Olinuxino.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-29 23:37:16 +01:00
Arnd Bergmann
0fafd50e4b pinctrl: nomadik: nmk_prcm_gpiocr_get_mode may be unused
nmk_prcm_gpiocr_get_mode is only needed for debugfs output at
the moment, which can be compile-time disabled. Marking
the function __maybe_unused still gives us compile-time
coverage, but avoids a gcc warning.

Without this patch, building nhk8815_defconfig results in:

drivers/pinctrl/pinctrl-nomadik.c:676:12: warning: 'nmk_prcm_gpiocr_get_mode' defined but not used [-Wunused-function]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jean-Nicolas Graux <jean-nicolas.graux@stericsson.com>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-29 23:10:30 +01:00
Arnd Bergmann
312b00e510 pinctrl: exynos: don't mark probing functions as __init
Functions called from a driver probe() method must not be
marked __init, because they may get called after the
init phase is done, when the device shows up late, or
because of deferred probing.

Without this patch, building exynos_defconfig results in
multiple warnings like:

WARNING: drivers/pinctrl/built-in.o(.text+0x51bc): Section mismatch in reference from the function exynos5440_pinctrl_probe() to the function .init.text:exynos5440_gpiolib_register()
The function exynos5440_pinctrl_probe() references
the function __init exynos5440_gpiolib_register().
This is often because exynos5440_pinctrl_probe lacks a __init
annotation or the annotation of exynos5440_gpiolib_register is wrong.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-29 23:10:11 +01:00