Clean up: remove xdr_encode_dirpath() now that it has been replaced.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Check the length of the supplied dirpath, and see that it fits
properly in the RPC buffer.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: Relocate MNT program procedure number definitions to the
only file that uses them. Relocate the version number definitions,
which are shared, to nfs.h. Remove duplicate program number
definitions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cut NSM upcall RPC traffic in half -- don't do a NULL call first.
The cases where a ping would be helpful are rare.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When rpc.statd starts up in user space at boot time, it attempts to
write the latest NSM local state number into
/proc/sys/fs/nfs/nsm_local_state.
If lockd.ko isn't loaded yet (as is the case in most configurations),
that file doesn't exist, thus the kernel's NSM state remains set to
its initial value of zero during lockd operation.
This is a problem because rpc.statd and lockd use the NSM state number
to prevent repeated lock recovery on rebooted hosts. If lockd sends
a zero NSM state, but then a delayed SM_NOTIFY with a real NSM state
number is received, there is no way for lockd or rpc.statd to
distinguish that stale SM_NOTIFY from an actual reboot. Thus lock
recovery could be performed after the rebooted host has already
started reclaiming locks, and those locks will be lost.
We could change /etc/init.d/nfslock so it always modprobes lockd.ko
before starting rpc.statd. However, if lockd.ko is ever unloaded
and reloaded, we are back at square one, since the NSM state is not
preserved across an unload/reload cycle. This may happen frequently
on clients that use automounter. A period of NFS inactivity causes
lockd.ko to be unloaded, and the kernel loses its NSM state setting.
Instead, let's use the fact that rpc.statd plants the local system's
NSM state in every SM_MON (and SM_UNMON) reply. lockd performs a
synchronous SM_MON upcall to the local rpc.statd _before_ sending its
first NLM request to a new remote. This would permit rpc.statd to
provide the current NSM state to lockd, even after lockd.ko had been
unloaded and reloaded.
Note that NLMPROC_LOCK arguments are constructed before the
nsm_monitor() call, so we have to rearrange argument construction very
slightly to make this all work out.
And, the kernel appears to treat NSM state as a u32 (see struct
nlm_args and nsm_res). Make nsm_local_state a u32 as well, to ensure
we don't get bogus comparison results.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clear "ret" if the error return from svc_create_xprt(AF_INET6) was
-EAFNOSUPORT. Otherwise, callback start-up will succeed, but
nfs_callback_up() will return -EAFNOSUPPORT anyway, and the first
NFSv4 mount attempt after a reboot will fail.
Bug introduced by commit f738f517 in 2.6.30-rc1.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the kernel cannot start the NFSv4 callback service during a mount
request, it returns -ENOMEM to user space, resulting in this message:
mount.nfs4: Cannot allocate memory
Adjust nfs_alloc_client() and nfs_get_client() to pass NFSv4 callback
start-up errors back to user space so a less mysterious error message
can be displayed by the mount command.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The "intr" mount option has been deprecated for a while, but
/proc/mounts continues to display "nointr" whether "intr" or "nointr"
has been specified for a mount point.
Since these options do not have any effect, simply do not display
them.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Adds support for splice writes. It effectively calls
generic_file_splice_write() to do the writes.
We need not worry about O_APPEND case as the combination of splice()
writes and O_APPEND is disallowed. This patch propagates NFS write
errors back to the caller. The number of bytes written via splice are
being added to NFSIO_NORMALWRITTENBYTES as these are effectively
cached writes.
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch reverts 3f31fddf, which is no longer needed because if a
race between freeing buffer and committing transaction functionality
occurs and dio gets error, currently dio falls back to buffered IO due
to the commit 6ccfa806.
Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Cc: Mingming Cao <cmm@us.ibm.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Validates the callback's sessionID, the slot number, and the sequence ID.
Increments the slot's sequence.
Detects replays, but simply prints a debug message (if debugging is enabled
since we don't yet implement a duplicate request cache for the backchannel.
This should not present a problem, since only idempotent callbacks are
currently implemented.
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: Backchannel: Be more obvious about the return value]
[nfs41: Backchannel: dprink in host order]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Finds the 'struct nfs_client' that matches the server's address, major
version number, and session ID.
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Defines a new 'struct nfs4_slot_table' in the 'struct nfs4_session'
for use by the backchannel. Initializes, resets, and destroys the backchannel
slot table in the same manner the forechannel slot table is initialized,
reset, and destroyed.
The sequenceid for each slot in the backchannel slot table is initialized
to 0, whereas the forechannel slotid's sequenceid is set to 1.
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Generalize nfs4_init_slot_table() so it can be used to initialize the
backchannel slot table in addition to the forechannel slot table.
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Generalize nfs4_reset_slot_table() so it can be used to reset the
backchannel slot table in addition to the forechannel slot table.
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Change the type of cs_addr and csr_status to 'struct sockaddr' and
'__be32' since the cb_sequence processing function will use existing
functionality that expects these types.
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
CB_SEQUENCE must appear first in the callback compound RPC.
If it is not the first operation NFS4ERR_SEQUENCE_POS must be returned.
If the first operation ni the CB_COMPOUND is not CB_SEQUENCE then
NFS4ERR_OP_NOT_IN_SESSION must be returned.
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: refactor op preprocessing out of process_op]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: get rid of READMEM and COPYMEM for callback_xdr.c]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: get rid of READ64 in callback_xdr.c]
See http://linux-nfs.org/pipermail/pnfs/2009-June/007846.html
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Note that this patch changes the nfsv4.0 behavior also when
CONFIG_NFS_V4_1 is not defined where NFS4ERR_MINOR_VERS_MISMATCH
will be returned if the client received a CB_COMPOUND
with minorversion != 0. Previously, it would have
returned NFS4ERR_OP_ILLEGAL for CB_SEQUENCE.
(or if the server is broken and sent OP_CB_GETATTR or OP_CB_RECALL
with minorversion!=0, they would have been processed normally.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: refactor op preprocessing out of process_op]
See http://linux-nfs.org/pipermail/pnfs/2009-June/007845.html
[nfs41: define CB_NOTIFY_DEVICEID as not supported]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Frees the preallocated backchannel resources that are associated with
this session when the session is destroyed.
A backchannel is currently created once per session. Destroy the backchannel
only when the session is destroyed.
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Set the SESSION4_BACK_CHAN flag to indicate the client supports a backchannel.
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
The NFS v4.1 callback service has already been setup, and
rpc_xprt->serv points to the svc_serv structure describing it.
Invoke the xprt_setup_backchannel() initialization to pre-
allocate the necessary backchannel structures.
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: change nfs4_put_session(nfs4_session**) to nfs4_destroy_session(nfs_session*)]
Signed-off-by: Alexandros Batsakis <Alexandros.Batsakis@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[moved xprt_setup_backchannel from nfs4_init_session to nfs4_init_backchannel]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Tracks the nfs_callback_info for both versions, enabling the callback
service for v4 and v4.1 to run concurrently and be stopped independently
of each other.
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
nfs41_callback_up() initializes the necessary queues and creates the new
nfs41_callback_svc thread. This thread executes the callback service which
waits for requests to arrive on the svc_serv->sv_cb_list.
NFS41_BC_MIN_CALLBACKS is set to 1 because we expect callbacks to not
cause substantial latency.
The actual processing of the callback will be implemented as a separate patch.
There is only one NFSv4.1 callback service. The first caller of
nfs4_callback_up() creates the service, subsequent callers increment a
reference count on the service. The service is destroyed when the last
caller invokes nfs_callback_down().
The transport needs to hold a reference to the callback service in order
to invoke it during callback processing. Currently this reference is only
obtained when the service is first created. This is incorrect, since
subsequent registrations for other transports will leave the xprt->serv
pointer uninitialized, leading to an oops when a callback arrives on
the "unreferenced" transport.
This patch fixes the problem by ensuring that a reference to the service
is saved in xprt->serv, either because the service is created by this
invocation to nfs4_callback_up() or by a prior invocation.
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: Add a reference to svc_serv during callback service bring up]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[Type check arguments of nfs_callback_up]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: save svc_serv in nfs_callback_info]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[Removal of ugly #ifdefs]
[nfs41: Update to removal of ugly #ifdefs]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
It is possible for servers to return NFS4ERR_BAD_STATEID when
the state management code is recovering locks or is reclaiming state when
returning a delegation. Ensure that we handle that case.
While we're at it, add in handlers for NFS4ERR_STALE,
NFS4ERR_ADMIN_REVOKED, NFS4ERR_OPENMODE, NFS4ERR_DENIED and
NFS4ERR_STALE_STATEID, since the protocol appears to allow for them too.
Also handle ENOMEM...
Finally, rather than add new NFSv4.0-specific errors and error handling into
the generic delegation code, move that open file and locking state error
handling into the NFSv4 layer.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The NFSv4 delegation recovery code is required by the protocol to handle
more errors. Rather than add NFSv4.0 specific errors into 'generic'
delegation code, we should move the error handling into the NFSv4 layer.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
NFSv4 should just ignore the 'nolock' option. It is an NFSv2/v3 thing...
This fixes the Oops in http://bugzilla.kernel.org/show_bug.cgi?id=13330
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
move nfs4_init_callback into nfs4_init_client_minor_version
and nfs4_destroy_callback into nfs4_clear_client_minor_version
as these need to happen also when auto-negotiating the minorversion
once the callback service for nfs41 becomes different than for nfs4.0
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: Fix checkpatch warning]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[Type check arguments of nfs_callback_up]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: Backchannel: Remove FIXME comment]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Unlike minorversion0, in nfsv4.1 the open and lock seqids need
not be incremented by the client and should always be set to zero.
This is implemented using a new nfs_rpc_ops methods -
increment_open_seqid and increment_lock_seqid
Signed-off-by: Rahul Iyer <iyer@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: check for session not minorversion]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This creates the nfsv4.1 session on mount.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Unlike SETCLIENTID, EXCHANGE_ID requires a machine credential. Do not search
for credentials other than the machine credential.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
EXCHANGE_ID has different credential requirements than SETCLIENTID.
Prepare for a separate credential function.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
nfsv4.1 clientid is established via EXCHANGE_ID rather than
SETCLIENTID{,_CONFIRM}
This is implemented using a new establish_clid method in
nfs4_state_recovery_ops.
nfs41: establish clientid via exchange id only if cred != NULL
>From 2.6.26 reclaimer() uses machine cred for setting up the client id
therefore it is never expected to be NULL.
Signed-off-by: Rahul Iyer <iyer@netapp.com>
[removed dprintk]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: lease renewal]
[revamped patch for new nfs4_state_manager design]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Use the machine cred for sending SEQUENCE to renew
the client's lease.
[revamp patch for new state management design starting 2.6.29]
[nfs41: support minorversion 1 for nfs4_check_lease]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: get cred in exchange_id when cred arg is NULL]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: use cl_machined_cred instead of cl_ex_cred]
Since EXCHANGE_ID insists on using the machine credential, cl_ex_cred is
not needed. nfs4_proc_exchange_id() is only called if the machine credential
is available. Remove the credential logic from nfs4_proc_exchange_id.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Send a NFSv4.1 SEQUENCE op rather than RENEW that was deprecated in
minorversion 1.
Use the nfs_client minorversion to select reboot_recover/
network_partition_recovery/state_renewal ops.
Note: we use reclaimer to create the nfs41 session before there are any
cl_superblocks for the nfs_client.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: check for session not minorversion]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[revamped patch for new nfs4_state_manager design]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: obliterate nfs4_state_recovery_ops.renew_lease method]
moved to nfs4_state_maintenance_ops
[also undid per-minorversion nfs4_state_recovery_ops here]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Define a new session reset state which is set upon a sequence operation error
in both the sync and async error handlers.
Place all new requests and all but the last outstanding rpc on the
slot_tbl_waitq. Spawn the recovery thread when the last slot is free.
Call nfs4_proc_destroy_session, reinitialize the session, call
nfs4_proc_create_session, clear the session reset state, and wake up the next
task on the slot_tbl_waitq.
Return the nfs4_proc_destroy_session status to the session reclaimer and
check for NFS4ERR_BADSESSION and NFS4ERR_DEADSESSION. Other destroy session
errors should be handled in nfs4_proc_destroy_session where the call can
be retried with adjusted arguments.
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
nfs41: make nfs4_wait_bit_killable public]
nfs4_wait_bit_killable to be used by NFSv4.1 session recover logic.
Signed-off-by: Rahul Iyer <iyer@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: have create_session work on nfs_client]
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41: trigger the state manager for session reset]
Replace the session reset state with the NFS4CLNT_SESSION_SETUP cl_state.
Place all rpc tasks to sleep on the slot table waitqueue until the slot
table is drained, then schedule state recovery and wait for it to complete.
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41: remove nfs41_session_recovery [ch]
Replaced by using the nfs4_state_manager.
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41: nfs4_wait_bit_killable only used locally]
[nfs41: keep nfs4_wait_bit_killable static]
[nfs41: keep const nfs_server in nfs4_handle_exception]
[nfs41: remove session parameter from nfs4_find_slot]
Signed-off-by: Andy Adamson <andros@netapp.com
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: resset the session from nfs41_setup_sequence]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Remove checking for any errors that the SEQUENCE operation does not return.
-NFS4ERR_STALE_CLIENTID, NFS4ERR_EXPIRED, NFS4ERR_CB_PATH_DOWN, NFS4ERR_BACK_CHAN_BUSY, NFS4ERR_OP_NOT_IN_SESSION.
SEQUENCE operation error recovery is very primative, we only reset the session.
Remove checking for any errors that are returned by the SEQUENCE operation, but
that resetting the session won't address.
NFS4ERR_RETRY_UNCACHED_REP, NFS4ERR_SEQUENCE_POS,NFS4ERR_TOO_MANY_OPS.
Add error checking for missing SEQUENCE errors that a session reset will
address.
NFS4ERR_BAD_HIGH_SLOT, NFS4ERR_DEADSESSION, NFS4ERR_SEQ_FALSE_RETRY.
A reset of the session is currently our only response to a SEQUENCE operation
error. Don't reset the session on errors where a new session won't help.
Don't reset the session on errors where a new session won't help.
[nfs41: nfs4_async_handle_error update error checking]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: trigger the state manager for session reset]
Replace session state bit with nfs_client state bit. Set the
NFS4CLNT_SESSION_SETUP bit upon a session related error in the sync/async
error handlers.
[nfs41: _nfs4_async_handle_error fix session reset error list]
Sequence operation errors that session reset could help.
NFS4ERR_BADSESSION
NFS4ERR_BADSLOT
NFS4ERR_BAD_HIGH_SLOT
NFS4ERR_DEADSESSION
NFS4ERR_CONN_NOT_BOUND_TO_SESSION
NFS4ERR_SEQ_FALSE_RETRY
NFS4ERR_SEQ_MISORDERED
Sequence operation errors that a session reset would not help
NFS4ERR_BADXDR
NFS4ERR_DELAY
NFS4ERR_REP_TOO_BIG
NFS4ERR_REP_TOO_BIG_TO_CACHE
NFS4ERR_REQ_TOO_BIG
NFS4ERR_RETRY_UNCACHED_REP
NFS4ERR_SEQUENCE_POS
NFS4ERR_TOO_MANY_OPS
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41 nfs4_handle_exception fix session reset error list]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[moved nfs41_sequece_call_done code to nfs41: sequence operation]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Move the code to reset a session from the session_reclaimer to the
nfs4_state_manager. Destroy the session, and create a new one. Treat
NFS4ERR_BADSESSION and NFS4ERR_DEADSESSION as a successful
nfs4_proc_destroy_session. Signal nfs4_proc_create_session that this is a
session reset so that the session slot table is re-used.
If the clientid is stale, set both NFS4CLNT_LEASE_EXPIRED and
NFS4CLNT_SESSION_SETUP bits and retry.
Use a switch statement in nfs4_session_recovery_handle_error for future
patche which will add handling for other errors.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: session reset in nfs4_recovery_handle_error]
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41: reset session on nfs4_do_reclaim session reset error]
If nfs4_do_reclaim gets a session reset error, nfs4_recovery_handle_error
will set the NFS4CLNT_SESSION_SETUP bit, and the state manager should
continue processing to reset the session.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[move nfs4_proc_destroy_session declaration here]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
At mount, nfs_alloc_client sets the cl_state NFS4CLNT_LEASE_EXPIRED bit
and nfs4_alloc_session sets the NFS4CLNT_SESSION_SETUP bit, so both bits are
set when nfs4_lookup_root calls nfs4_recover_expired_lease which schedules
the nfs4_state_manager and waits for it to complete.
Place the session setup after the clientid establishment in nfs4_state_manager
so that the session is setup right after the clientid has been established
without rescheduling the state manager.
Unlike nfsv4.0, the nfs_client struct is not ready to use until the session
has been established. Postpone marking the nfs_client struct to NFS_CS_READY
until after a successful CREATE_SESSION call so that other threads cannot use
the client until the session is established.
If the EXCHANGE_ID call fails and the session has not been setup (the
NFS4CLNT_SESSION_SETUP bit is set), mark the client with the error and return.
If the session setup CREATE_SESSION call fails with NFS4ERR_STALE_CLIENTID
which could occur due to server reboot or network partition inbetween the
EXCHANGE_ID and CREATE_SESSION call, reset the NFS4CLNT_LEASE_EXPIRED and
NFS4CLNT_SESSION_SETUP bits and try again.
If the CREATE_SESSION call fails with other errors, mark the client with
the error and return.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: NFS_CS_SESSION_SETUP cl_cons_state for back channel setup]
On session setup, the CREATE_SESSION reply races with the server back channel
probe which needs to succeed to setup the back channel. Set a new
cl_cons_state NFS_CS_SESSION_SETUP just prior to the CREATE_SESSION call
and add it as a valid state to nfs_find_client so that the client back channel
can find the nfs_client struct and won't drop the server backchannel probe.
Use a new cl_cons_state so that NFSv4.0 back channel behaviour which only
sets NFS_CS_READY is unchanged.
Adjust waiting on the nfs_client_active_wq accordingly.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: rename NFS_CS_SESSION_SETUP to NFS_CS_SESSION_INITING]
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41: set NFS_CL_SESSION_INITING in alloc_session]
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41: move session setup into a function]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[moved nfs4_proc_create_session declaration here]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Separated from nfs41: schedule async session reset
Do not kfree the session slot table upon session reset, just re-initialize it.
Add a boolean to nfs4_proc_create_session to inidicate if this is a
session reset or a session initialization.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Implement the sequence operation conforming to
http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-26
Check returned sessionid, slotid and slot sequenceid in decode_sequence.
If the server returns different values for sessionID, slotID or slot sequence
number than what was sent, the server is looney tunes.
Pass the sequence operation status to nfs41_sequence_done in order to
determine when to increment the slot sequence ID.
Free slot is separated from sequence done.
Signed-off-by: Rahul Iyer <iyer@netapp.com>
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Andy Adamson<andros@umich.edu>
[nfs41: sequence res use slotid]
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41: deref slot table in decode_sequence only for minorversion!=0]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: nfs4_call_sync]
[nfs41: remove SEQ4_STATUS_USE_TK_STATUS]
[nfs41: return ESERVERFAULT in decode_sequence]
[no sr_session, no sr_flags]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: use nfs4_call_sync_sequence to renew session lease]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: remove nfs4_call_sync_sequence forward definition]
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41: use struct nfs_client for nfs41_proc_async_sequence]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: pass *session in seq_args and seq_res]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41 nfs41_sequence_call_done update error checking]
[nfs41 nfs41_sequence_done update error checking]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: remove switch on error from nfs41_sequence_call_done]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The session is per struct nfs_client, not per nfs_server. Allow the handler
to be called with no nfs_server which simplifies the nfs4_proc_async_sequence session renewal call and will let it be used by pnfs file layout data servers.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Set the mount points rsize and wsize to the negotiated session fore channel
maximum response and requeset size. These values will be bound checked in
nfs_server_set_fsinfo.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[move nfs4_session_set_rwsize into CONFIG_NFS_V4]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Invalidate the session if the server returns invalid fore or back channel
attributes.
Use a KERN_WARNING to report the fatal session estabishment error.
Signed-off-by: Andy Adamson <andros@netapp.com>
[refactor nfs4_verify_channel_attrs]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Implement the create_session operation conforming to
http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-26
Set the real fore channel max operations to preserve server resources.
Note: If the server returns < NFS4_MAX_OPS, the client will very soon
get an NFS4ERR_TOO_MANY_OPS. A later patch will handle this.
Set the max_rqst_sz and max_resp_sz to PAGE_SIZE - we preallocate the buffers.
Set the back channel max_resp_sz_cached to zero to force the client to
always set csa_cachethis to FALSE because the current implementation
of the back channel DRC only supports caching the CB_SEQUENCE operation.
The client back channel server supports one slot, and desires 2 operations
per compound.
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Andy Adamson<andros@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: remove extraneous rpc_clnt pointer]
Use the struct nfs_client cl_rpcclient.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: nfs4_init_channel_attrs, just use nfs41_create_session_args]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: use rsize and wsize for session channel attributes]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: set channel max operations]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: set back channel attributes]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: obliterate nfs4_adjust_channel_attrs]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: have create_session work on nfs_client]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: move CONFIG_NFS_V4_1 endif]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: pass *session in seq_args and seq_res]
[moved nfs4_init_slot_table definition here]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: use kcalloc to allocate slot table]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
[nfs41: fix Xcode_create_session's xdr Xcoding pointer type]
[nfs41: refactor decoding of channel attributes]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
get_lease_time uses the FSINFO rpc operation to
get the lease time attribute.
nfs4_get_lease_time() is only called from the state manager on session setup
so don't recover from clientid or sequence level errors.
We do need to recover from NFS4ERR_DELAY or NFS4ERR_GRACE.
Use NFS4_POLL_RETRY_MIN - the Linux server returns NFS4ERR_DELAY when an
upcall is needed to resolve an uncached export referenced by a file handle.
[nfs41: sequence res use slotid]
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: remove extraneous rpc_clnt pointer]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: have get_lease_time work on nfs_client]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: get_lease_time recover from NFS4ERR_DELAY]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: pass *session in seq_args and seq_res]
[define nfs4_get_lease_time_{args,res}]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Implement the exchange_id operation conforming to
http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-26
Unlike NFSv4.0, NFSv4.1 requires machine credentials. RPC_AUTH_GSS machine
credentials will be passed into the kernel at mount time to be available for
the exchange_id operation.
RPC_AUTH_UNIX root mounts can use the UNIX root credential. Store the root
credential in the nfs_client struct.
Without a credential, NFSv4.1 state renewal fails.
[nfs41: establish clientid via exchange id only if cred != NULL]
Signed-off-by: Andy Adamson<andros@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: move nfstime4 from under CONFIG_NFS_V4_1]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: do not wait a lease time in exchange id]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: pass *session in seq_args and seq_res]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
[nfs41: Ignoring impid in decode_exchange_id is missing a READ_BUF]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: fix Xcode_exchange_id's xdr Xcoding pointer type]
[nfs41: get rid of unused struct nfs41_exchange_id_res members]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Separate delegreturn calls from nfs41: sequence setup/done support
Implement the delegreturn rpc_call_prepare method for
asynchronuos nfs rpcs, call nfs41_setup_sequence from
respective rpc_call_validate_args methods.
Call nfs4_sequence_done from respective rpc_call_done methods.
Note that we need to pass a pointer to the nfs_server in calls data
for passing on to nfs4_sequence_done.
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[pnfs: client data server write validate and release]
Signed-off-by: Andy Adamson<andros@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Separate commit calls from nfs41: sequence setup/done support
Implement the commit rpc_call_prepare method for
asynchronuos nfs rpcs, call nfs41_setup_sequence from
respective rpc_call_validate_args methods.
Call nfs4_sequence_done from respective rpc_call_done methods.
Note that we need to pass a pointer to the nfs_server in calls data
for passing on to nfs4_sequence_done.
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[pnfs: client data server write validate and release]
Signed-off-by: Andy Adamson<andros@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: Support sessions with O_DIRECT.]
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: separate free slot from sequence done]
[nfs41: nfs4_sequence_free_slot use nfs_client for data server]
Signed-off-by: Andy Adamson<andros@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Separate write calls from nfs41: sequence setup/done support
Implement the write rpc_call_prepare method for
asynchronuos nfs rpcs, call nfs41_setup_sequence from
respective rpc_call_validate_args methods.
Call nfs4_sequence_done from respective rpc_call_done methods.
Note that we need to pass a pointer to the nfs_server in calls data
for passing on to nfs4_sequence_done.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[pnfs: client data server write validate and release]
Signed-off-by: Andy Adamson <andros@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[move the nfs4_sequence_free_slot call in nfs_readpage_retry from]
[nfs41: separate free slot from sequence done
Signed-off-by: Andy Adamson <andros@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: Support sessions with O_DIRECT.]
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: nfs4_sequence_free_slot use nfs_client for data server]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Implement the read rpc_call_prepare method for
asynchronuos nfs rpcs, call nfs41_setup_sequence from
respective rpc_call_validate_args methods.
Call nfs4_sequence_done from respective rpc_call_done methods.
Note that we need to pass a pointer to the nfs_server in calls data
for passing on to nfs4_sequence_done.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[pnfs: client data server write validate and release]
Signed-off-by: Andy Adamson <andros@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[move the nfs4_sequence_free_slot call in nfs_readpage_retry from]
[nfs41: separate free slot from sequence done]
[remove nfs_readargs.nfs_server, use calldata->inode instead]
Signed-off-by: Andy Adamson <andros@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: Support sessions with O_DIRECT]
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: nfs4_sequence_free_slot use nfs_client for data server]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Implement the rpc_call_prepare methods for
asynchronuos nfs rpcs, call nfs41_setup_sequence from
respective rpc_call_validate_args methods.
Call nfs4_sequence_done from respective rpc_call_done methods.
Note that we need to pass a pointer to the nfs_server in calls data
for passing on to nfs4_sequence_done.
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[pnfs: client data server write validate and release]
Signed-off-by: Andy Adamson<andros@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: separate free slot from sequence done]
[nfs41: sequence res use slotid]
[nfs41: remove SEQ4_STATUS_USE_TK_STATUS]
[nfs41: nfs4_sequence_free_slot use nfs_client for data server]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Separate nfs4_locku calls from nfs41: sequence setup/done support
Call nfs4_sequence_done from respective rpc_call_done methods.
Note that we need to pass a pointer to the nfs_server in calls data
for passing on to nfs4_sequence_done.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[pnfs: client data server write validate and release]
Signed-off-by: Andy Adamson <andros@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: nfs4_sequence_free_slot use nfs_client for data server]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Separate nfs4_lock calls from nfs41: sequence setup/done support
Call nfs4_sequence_done from respective rpc_call_done methods.
Note that we need to pass a pointer to the nfs_server in calls data
for passing on to nfs4_sequence_done.
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[pnfs: client data server write validate and release]
[use nfs4_sequence_done_free_slot]
Signed-off-by: Andy Adamson<andros@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Separate nfs4_open calls from nfs41: sequence setup/done support
Call nfs4_sequence_done from respective rpc_call_done methods.
Note that we need to pass a pointer to the nfs_server in calls data
for passing on to nfs4_sequence_done.
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[pnfs: client data server write validate and release]
[use nfs4_sequence_done_free_slot]
Signed-off-by: Andy Adamson<andros@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Separate nfs4_close calls from nfs41: sequence setup/done support
Call nfs4_sequence_done from respective rpc_call_done methods.
Note that we need to pass a pointer to the nfs_server in calls data
for passing on to nfs4_sequence_done.
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[pnfs: client data server write validate and release]
Signed-off-by: Andy Adamson<andros@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: separate free slot from sequence done]
[nfs41: sequence res use slotid]
[nfs41: remove SEQ4_STATUS_USE_TK_STATUS]
[nfs41: nfs4_sequence_free_slot use nfs_client for data server]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Implement nfs4.1 synchronous rpc_call_done method
that essentially just calls nfs4_sequence_done, that turns
around and calls nfs41_sequence_done for minorversion1 rpcs.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: check for session not minorversion]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[move adding nfs4_sequence_free_slot from nfs41-separate-free-slot-from-sequence-done]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: nfs41_call_sync_data use nfs_client not nfs_server]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Handle session level errors, update slot sequence id and
sessions bookeeping, free slot.
[nfs41: sequence res use slotid]
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: remove SEQ4_STATUS_USE_TK_STATUS]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: check for session not minorversion]
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41: bail out early out of nfs41_sequence_done if !res->sr_session]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[move nfs4_sequence_done from nfs41: nfs41_call_sync_done]
Signed-off-by: Andy Adamson <andros@netapp.com>
[move nfs4_sequence_free_slot from nfs41: separate free slot from sequence done]
Don't free the slot until after all rpc_restart_calls have completed.
Session reset will require more work.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[moved reset sr_slotid to nfs41_sequence_free_slot]
[free slot also on unexpectecd error]
[remove seq_res.sr_session member, use nfs_client's instead]
[ditch seq_res.sr_flags until used]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[look at sr_slotid for bailing out early from nfs41_sequence_done]
[nfs41: rpc_wake_up_next if sessions slot was not consumed.]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: nfs4_sequence_free_slot use nfs_client for data server]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: remove unused error checking in nfs41_sequence_done]
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41: remove nfs4_has_session check in nfs41_sequence_done]
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41: remove nfs_client pointer check]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
[from nfs41: separate free slot from sequence done]
Don't free the slot until after all rpc_restart_calls have completed.
Session reset will require more work.
As noted by Trond, since we're using rpc_wake_up_next rather than
rpc_wake_up() we must always wake up the next task in the queue
either by going through nfs4_free_slot, or just calling
rpc_wake_up_next if no slot is to be freed.
[nfs41: sequence res use slotid]
[nfs41: remove SEQ4_STATUS_USE_TK_STATUS]
[got rid of nfs4_sequence_res.sr_session, use nfs_client.cl_session instead]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: rpc_wake_up_next if sessions slot was not consumed.]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: nfs4_sequence_free_slot use nfs_client for data server]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Free a slot in the slot table.
Mark the slot as free in the bitmap-based allocation table
by clearing a bit corresponding to the slotid.
Update lowest_free_slotid if freed slotid is lower than that.
Update highest_used_slotid. In the case the freed slotid
equals the highest_used_slotid, scan downwards for the next
highest used slotid using the optimized fls* functions.
Finally, wake up thread waiting on slot_tbl_waitq for a free slot
to become available.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: free slot use slotid]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: use find_first_zero_bit for nfs4_find_slot]
While at it, obliterate lowest_free_slotid and fix-up related comments.
As per review comment 21/85.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: use __clear_bit for nfs4_free_slot]
While at it, fix-up function comment.
Part of review comment 22/85.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: use find_last_bit in nfs4_free_slot to determine highest used slot.]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: rpc_sleep_on slot_tbl_waitq must be called under slot_tbl_lock]
Otherwise there's a race (we've hit) with nfs4_free_slot where
nfs41_setup_sequence sees a full slot table, unlocks slot_tbl_lock,
nfs4_free_slots happen concurrently and call rpc_wake_up_next
where there's nobody to wake up yet, context goes back to
nfs41_setup_sequence which goes to sleep when the slot table
is actually empty now and there's no-one to wake it up anymore.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Allocate a slot in the session slot table and set the sequence op arguments.
Called at the rpc prepare stage.
Add a status to nfs41_sequence_res, initialize it to one so that we catch
rpc level failures which do not go through decode_sequence which sets
the new status field.
Note that upon an rpc level failure, we don't know if the server processed the
sequence operation or not. Proceed as if the server did process the sequence
operation.
Signed-off-by: Rahul Iyer <iyer@netapp.com>
[nfs41: sequence args use slotid]
[nfs41: find slot return slotid]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: remove SEQ4_STATUS_USE_TK_STATUS]
As per 11-14-08 review
[move extern declaration from nfs41: sequence setup/done support]
[removed sa_session definition, changed sa_cache_this into a u8 to reduce footprint]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: rpc_sleep_on slot_tbl_waitq must be called under slot_tbl_lock]
Otherwise there's a race (we've hit) with nfs4_free_slot where
nfs41_setup_sequence sees a full slot table, unlocks slot_tbl_lock,
nfs4_free_slots happen concurrently and call rpc_wake_up_next
where there's nobody to wake up yet, context goes back to
nfs41_setup_sequence which goes to sleep when the slot table
is actually empty now and there's no-one to wake it up anymore.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Find a free slot using bitmap-based allocation.
Use the optimized ffz function to find a zero bit
in the bitmap that indicates a free slot, starting
the search from the 'lowest_free_slotid' position.
If found, mark the slot as used in the bitmap, get
the slot's slotid and seqid, and update max_slotid
to be used by the SEQUENCE operation.
Also, update lowest_free_slotid for next search.
If no free slot was found the caller has to wait
for a free slot (outside the scope of this function)
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: find slot return slotid]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[use find_first_zero_bit for nfs4_find_slot as per review comment 21/85.]
[use NFS4_MAX_SLOT_TABLE rather than NFS4_NO_SLOT]
[nfs41: rpc_sleep_on slot_tbl_waitq must be called under slot_tbl_lock]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Perform the nfs4_setup_sequence in the rpc_call_prepare state.
If a session slot is not available, we will rpc_sleep_on the
slot wait queue leaving the tk_action as rpc_call_prepare.
Once we have a session slot, hang on to it even through rpc_restart_calls.
Ensure the nfs41_sequence_res sr_slot pointer is NULL before rpc_run_task is
called as nfs41_setup_sequence will only find a new slot if it is NULL.
A future patch will call free slot after any rpc_restart_calls, and handle the
rpc restart that result from a sequence operation error.
Signed-off-by: Rahul Iyer <iyer@netapp.com>
[nfs41: sequence res use slotid]
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: simplify nfs4_call_sync]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: nfs4_call_sync]
[nfs41: check for session not minorversion]
[nfs41: remove rpc_message from nfs41_call_sync_args]
[moved NFS4_MAX_SLOT_TABLE logic into nfs41_setup_sequence]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: nfs41_call_sync_data use nfs_client not nfs_server]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: expose nfs4_call_sync_session for lease renewal]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: remove unnecessary return check]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Implement stubs for encode and decode sequence, defined as no-ops when
CONFIG_NFS_V4_1 is not defined.
Add the nfsv41 encode and decode sizes. Add encode_sequence to all
nfs4_enc_* routines and decode_sequence to all nfs4_dec_* routines as required
by v41.
[was nfs41: minorversion support for xdr]
[added nfs_client argument to encode_sequence so not to use sequence_args to pass sa_session]
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: pass *session in seq_args and seq_res]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
As Trond suggested, rather than passing a constant to xdr_inline_pages,
keep a running count of the expected reply bytes. In preparation for
nfs41, where additional op sequence are expteced when talking to nfs41
servers.
[NFS: cb_compoundhdr.replen is in words not bytes]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: get fs_locations replen before encoding the GETATTR]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: get getacl replen before encoding the GETATTR]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
replen holds the running count of expected reply bytes.
repl will then be used by encoding routines for xdr_inline_pages offset
after which data bytes are to be received directly into the xdr
buffer pages.
NOTE: According to the nfsv4 and v4.1 RFCs, the replied tag SHOULD be the same
is the one sent, but this is not required as a MUST for the server to do so.
The server may screw us if it replies a tag of a different length in the
compound result.
[NFS: cb_compoundhdr.replen is in words not bytes]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Initialize nfs4_sequence_res sr_slotid to NFS4_MAX_SLOT_TABLE.
[was nfs41: sequence res use slotid]
Signed-off-by: Andy Adamson <andros@netapp.com>
[pulled definition of struct nfs4_sequence_res.sr_slotid to here]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
To be used for getting the rpc's minorversion and for nfs41 xdr
{en,de}coding of the sequence operation.
Reset the seq session ptrs for minorversion=0 rpc calls.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Use nfs4_call_sync rather than rpc_call_sync to provide
for a nfs41 sessions-enabled interface for sessions manipulation.
The nfs41 rpc logic uses the rpc_call_prepare method to
recover and create the session, as well as selecting a free slot id
and the rpc_call_done to free the slot and update slot table
related metadata.
In the coming patches we'll add rpc prepare and done routines
for setting up the sequence op and processing the sequence result.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: nfs4_call_sync]
As per 11-14-08 review.
Squash into "nfs41: introduce nfs4_call_sync" and "nfs41: nfs4_setup_sequence"
Define two functions one for v4 and one for v41
add a pointer to struct nfs4_client to the correct one.
Signed-off-by: Andy Adamson <andros@netapp.com>
[added BUG() in _nfs4_call_sync_session if !CONFIG_NFS_V4_1]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: check for session not minorversion]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[group minorversion specific stuff together]
Signed-off-by: Alexandros Batsakis <Alexandros.Batsakis@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41: fixup nfs4_clear_client_minor_version]
[introduce nfs4_init_client_minor_version() in this patch]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[cleaned-up patch: got rid of nfs_call_sync_t, dprintks, cosmetics, extra server defs]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
NFSv4.1 Sessions basic data types, initialization, and destruction.
The session is always associated with a struct nfs_client that holds
the exchange_id results.
Signed-off-by: Rahul Iyer <iyer@netapp.com>
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[remove extraneous rpc_clnt pointer, use the struct nfs_client cl_rpcclient.
remove the rpc_clnt parameter from nfs4 nfs4_init_session]
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[Use the presence of a session to determine behaviour instead of the
minorversion number.]
Signed-off-by: Andy Adamson <andros@netapp.com>
[constified nfs4_has_session's struct nfs_client parameter]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[Rename nfs4_put_session() to nfs4_destroy_session() and call it from nfs4_free_client() not nfs4_free_server().
Also get rid of nfs4_get_session() and the ref_count in nfs4_session struct as keeping track of nfs_client should be sufficient]
Signed-off-by: Alexandros Batsakis <Alexandros.Batsakis@netapp.com>
[nfs41: pass rsize and wsize into nfs4_init_session]
Signed-off-by: Andy Adamson <andros@netapp.com>
[separated out removal of rpc_clnt parameter from nfs4_init_session ot a
patch of its own]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[Pass the nfs_client pointer into nfs4_alloc_session]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: don't assign to session->clp->cl_session in nfs4_destroy_session]
[nfs41: fixup nfs4_clear_client_minor_version]
[introduce nfs4_clear_client_minor_version() in this patch]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[Refactor nfs4_init_session]
Moved session allocation into nfs4_init_client_minor_version, called from
nfs4_init_client.
Leave rwise and wsize initialization in nfs4_init_session, called from
nfs4_init_server.
Reverted moving of nfs_fsid definition to nfs_fs_sb.h
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: Move NFS4_MAX_SLOT_TABLE define from under CONFIG_NFS_V4_1]
[Fix comile error when CONFIG_NFS_V4_1 is not set.]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[moved nfs4_init_slot_table definition to "create_session operation"]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: alloc session with GFP_KERNEL]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
To be returned to the mount command when trying to mount a v4 server
using minorversion 1.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Use the mount minorversion option to initialize the nfs_client cl_minorversion
and match it in nfs_match_client() when looking up a nfs_client.
[nfs41: remove ifdefs around nfs_client_initdata.minorversion]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This field is set to the nfsv4 minor version for this mount.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Note: This patch sets the referral to the same minorversion as the
current mount. Revisit in future patch.
Signed-off-by: Andy Adamson <andros@netapp.com>
[removed cl_minorversion assignment in nfs_set_client]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[always define nfs_client.cl_minorversion]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
mount -t nfs4 -o minorversion=[0|1] specifies whether to use 4.0 or 4.1.
By default, the minorversion is set to 0.
Signed-off-by: Mike Sager <sager@netapp.com>
[set default minorversion to 0 as per Trond and SteveD's request]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Added CONFIG_NFS_V4_1 and made it depend upon CONFIG_NFS_V4 and EXPERIMENTAL.
Indicate that CONFIG_NFS_V4_1 is for NFS developers at the moment
At the moment we're expecting folks trying out nfs41 to
actively participate in the development process by helping us
debug issues and ideally send patches to fix problems.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6:
[SCSI] aic79xx: make driver respect nvram for IU and QAS settings
[SCSI] don't attach ULD to Dell Universal Xport
[SCSI] lpfc 8.3.3 : Update driver version to 8.3.3
[SCSI] lpfc 8.3.3 : Add support for Target Reset handler entrypoint
[SCSI] lpfc 8.3.3 : Fix a couple of spin_lock and memory issues and a crash
[SCSI] lpfc 8.3.3 : FC/FCOE discovery fixes
[SCSI] lpfc 8.3.3 : Fix various SLI-3 vs SLI-4 differences
[SCSI] qla2xxx: Resolve a performance issue in interrupt
[SCSI] cnic, bnx2i: Fix build failure when CONFIG_PCI is not set.
[SCSI] nsp_cs: time_out reaches -1
[SCSI] qla2xxx: fix printk format warnings
[SCSI] ncr53c8xx: div reaches -1
[SCSI] compat: don't perform unneeded copy in sg_io code
[SCSI] zfcp: Update FC pass-through support
[SCSI] zfcp: Add FC pass-through support
[SCSI] FC Pass Thru support
* 'linux-next' of git://git.infradead.org/ubifs-2.6:
UBIFS: start using hrtimers
hrtimer: export ktime_add_safe
UBIFS: do not forget to register BDI device
UBIFS: allow sync option in rootflags
UBIFS: remove dead code
UBIFS: use anonymous device
UBIFS: return proper error code if the compr is not present
UBIFS: return error if link and unlink race
UBIFS: reset no_space flag after inode deletion
CC [M] fs/dlm/lock.o
fs/dlm/lock.c: In function ‘find_rsb’:
fs/dlm/lock.c:438: warning: ‘r’ may be used uninitialized in this function
Since r is used on the error path to set r_ret, set it to NULL.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (47 commits)
MIPS: Add hibernation support
MIPS: Move Cavium CP0 hwrena impl bits to cpu-feature-overrides.h
MIPS: Allow CPU specific overriding of CP0 hwrena impl bits.
MIPS: Kconfig Add SYS_SUPPORTS_HUGETLBFS and enable it for some systems.
Hugetlbfs: Enable hugetlbfs for more systems in Kconfig.
MIPS: TLB support for hugetlbfs.
MIPS: Add hugetlbfs page defines.
MIPS: Add support files for hugetlbfs.
MIPS: Remove unused parameters from iPTE_LW.
Staging: Add octeon-ethernet driver files.
MIPS: Export erratum function needed by octeon-ethernet driver.
MIPS: Cavium-Octeon: Add more chip specific feature tests.
MIPS: Cavium-Octeon: Add more board type constants.
MIPS: Export cvmx_sysinfo_get needed by octeon-ethernet driver.
MIPS: Add named alloc functions to OCTEON boot monitor memory allocator.
MIPS: Alchemy: devboards: Convert to gpio calls.
MIPS: Alchemy: xxs1500: use linux gpio api.
MIPS: Alchemy: MTX-1: Use linux gpio api.
MIPS: Alchemy: Rewrite GPIO support.
MIPS: Alchemy: Remove unused au1000_gpio.h header
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
get rid of BKL in fs/sysv
get rid of BKL in fs/minix
get rid of BKL in fs/efs
befs ->pust_super() doesn't need BKL
Cleanup of adfs headers
9P doesn't need BKL in ->umount_begin()
fuse doesn't need BKL in ->umount_begin()
No instance of ->bmap() needs BKL
remove unlock_kernel() left accidentally
ext4: avoid unnecessary spinlock in critical POSIX ACL path
ext3: avoid unnecessary spinlock in critical POSIX ACL path
As part of adding hugetlbfs support for MIPS, I am adding a new
kconfig variable 'SYS_SUPPORTS_HUGETLBFS'. Since some mips cpu
varients don't yet support it, we can enable selection of HUGETLBFS on
a system by system basis from the arch/mips/Kconfig.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
CC: William Irwin <wli@holomorphy.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 337eb00a2c
Push BKL down into ->remount_fs()
and
commit 4aa98cf768
Push BKL down into do_remount_sb()
were uncorrectly merged.
The former removes one pair of lock/unlock_kernel(), but the latter adds
several unlock_kernel(). Finally a few unlock_kernel() calls left.
Signed-off-by: J. R. Okajima <hooanon05@yahoo.co.jp>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If a filesystem supports POSIX ACL's, the VFS layer expects the filesystem
to do POSIX ACL checks on any files not owned by the caller, and it does
this for every single pathname component that it looks up.
That obviously can be pretty expensive if the filesystem isn't careful
about it, especially with locking. That's doubly sad, since the common
case tends to be that there are no ACL's associated with the files in
question.
ext4 already caches the ACL data so that it doesn't have to look it up
over and over again, but it does so by taking the inode->i_lock spinlock
on every lookup. Which is a noticeable overhead even if it's a private
lock, especially on CPU's where the serialization is expensive (eg Intel
Netburst aka 'P4').
For the special case of not actually having any ACL's, all that locking is
unnecessary. Even if somebody else were to be changing the ACL's on
another CPU, we simply don't care - if we've seen a NULL ACL, we might as
well use it.
So just load the ACL speculatively without any locking, and if it was
NULL, just use it. If it's non-NULL (either because we had a cached
entry, or because the cache hasn't been filled in at all), it means that
we'll need to get the lock and re-load it properly.
(This commit was ported from a patch originally authored by Linus for
ext3.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If a filesystem supports POSIX ACL's, the VFS layer expects the filesystem
to do POSIX ACL checks on any files not owned by the caller, and it does
this for every single pathname component that it looks up.
That obviously can be pretty expensive if the filesystem isn't careful
about it, especially with locking. That's doubly sad, since the common
case tends to be that there are no ACL's associated with the files in
question.
ext3 already caches the ACL data so that it doesn't have to look it up
over and over again, but it does so by taking the inode->i_lock spinlock
on every lookup. Which is a noticeable overhead even if it's a private
lock, especially on CPU's where the serialization is expensive (eg Intel
Netburst aka 'P4').
For the special case of not actually having any ACL's, all that locking is
unnecessary. Even if somebody else were to be changing the ACL's on
another CPU, we simply don't care - if we've seen a NULL ACL, we might as
well use it.
So just load the ACL speculatively without any locking, and if it was
NULL, just use it. If it's non-NULL (either because we had a cached
entry, or because the cache hasn't been filled in at all), it means that
we'll need to get the lock and re-load it properly.
This is noticeable even on Nehalem, which does locking quite well (much
better than P4). From lmbench:
Processor, Processes - times in microseconds - smaller is better
--------------------------------------------------------------------
Host OS Mhz null null open slct fork exec sh
call I/O stat clos TCP proc proc proc
--------- ------------- ---- ---- ---- ---- ---- ---- ---- ---- ----
- before:
nehalem.l Linux 2.6.30- 3193 0.04 0.09 0.95 1.45 2.18 69.1 273. 1141
nehalem.l Linux 2.6.30- 3193 0.04 0.09 0.95 1.48 2.28 69.9 253. 1140
nehalem.l Linux 2.6.30- 3193 0.04 0.10 0.95 1.42 2.19 68.6 284. 1141
- after:
nehalem.l Linux 2.6.30- 3193 0.04 0.09 0.92 1.44 2.12 68.3 282. 1094
nehalem.l Linux 2.6.30- 3193 0.04 0.09 0.92 1.39 2.20 67.0 308. 1123
nehalem.l Linux 2.6.30- 3193 0.04 0.09 0.92 1.39 2.36 67.4 293. 1148
where you can see what appears to be a roughly 3% improvement in stat
and open/close latencies from just the removal of the locking overhead.
Of course, this only matters for files you don't own (the owner never
needs to do the ACL checks), but that's the common case for libraries,
header files, and executables. As well as for the base components of any
absolute pathname, even if you are the owner of the final file.
[ At some point we probably want to move this ACL caching logic entirely
into the VFS layer (and only call down to the filesystem when
uncached), but in the meantime this improves ext3 a bit.
A similar fix to btrfs makes a much bigger difference (15x improvement
in lmbench) due to broken caching. ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Authentication error abort codes should be translated to appropriate
Linux error codes, rather than all being translated to EREMOTEIO - which
indicates that the server had internal problems.
Additionally, a server shouldn't be marked unavailable and the next
server tried if an authentication error occurs. This will quickly make
all the servers unavailable to the client. Instead the error should be
returned straight to the user.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* akpm: (182 commits)
fbdev: bf54x-lq043fb: use kzalloc over kmalloc/memset
fbdev: *bfin*: fix __dev{init,exit} markings
fbdev: *bfin*: drop unnecessary calls to memset
fbdev: bfin-t350mcqb-fb: drop unused local variables
fbdev: blackfin has __raw I/O accessors, so use them in fb.h
fbdev: s1d13xxxfb: add accelerated bitblt functions
tcx: use standard fields for framebuffer physical address and length
fbdev: add support for handoff from firmware to hw framebuffers
intelfb: fix a bug when changing video timing
fbdev: use framebuffer_release() for freeing fb_info structures
radeon: P2G2CLK_ALWAYS_ONb tested twice, should 2nd be P2G2CLK_DAC_ALWAYS_ONb?
s3c-fb: CPUFREQ frequency scaling support
s3c-fb: fix resource releasing on error during probing
carminefb: fix possible access beyond end of carmine_modedb[]
acornfb: remove fb_mmap function
mb862xxfb: use CONFIG_OF instead of CONFIG_PPC_OF
mb862xxfb: restrict compliation of platform driver to PPC
Samsung SoC Framebuffer driver: add Alpha Channel support
atmel-lcdc: fix pixclock upper bound detection
offb: use framebuffer_alloc() to allocate fb_info struct
...
Manually fix up conflicts due to kmemcheck in mm/slab.c
CONFIG_FILE_LOCKING should not depend on CONFIG_BLOCK.
This makes it possible to run complete systems out of a CONFIG_BLOCK=n
initramfs on current kernels again (this last worked on 2.6.27.*).
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
put_cpu_no_resched() is an optimization of put_cpu() which unfortunately
can cause high latencies.
The nfs iostats code uses put_cpu_no_resched() in a code sequence where a
reschedule request caused by an interrupt between the get_cpu() and the
put_cpu_no_resched() can delay the reschedule for at least HZ.
The other users of put_cpu_no_resched() optimize correctly in interrupt
code, but there is no real harm in using the put_cpu() function which is
an alias for preempt_enable(). The extra check of the preemmpt count is
not as critical as the potential source of missing a reschedule.
Debugged in the preempt-rt tree and verified in mainline.
Impact: remove a high latency source
[akpm@linux-foundation.org: build fix]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After introduction of keyed wakeups Davide Libenzi did on epoll, we are
able to avoid spurious wakeups in poll()/select() code too.
For example, typical use of poll()/select() is to wait for incoming
network frames on many sockets. But TX completion for UDP/TCP frames call
sock_wfree() which in turn schedules thread.
When scheduled, thread does a full scan of all polled fds and can sleep
again, because nothing is really available. If number of fds is large,
this cause significant load.
This patch makes select()/poll() aware of keyed wakeups and useless
wakeups are avoided. This reduces number of context switches by about 50%
on some setups, and work performed by sofirq handlers.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Cc: Anton Altaparmakov <aia21@cantab.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1) I_FREEING tests should be coupled with I_CLEAR
The two I_FREEING tests are racy because clear_inode() can set i_state to
I_CLEAR between the clear of I_SYNC and the test of I_FREEING.
2) skip I_WILL_FREE inodes in generic_sync_sb_inodes() to avoid possible
races with generic_forget_inode()
generic_forget_inode() sets I_WILL_FREE call writeback on its own, so
generic_sync_sb_inodes() shall not try to step in and create possible races:
generic_forget_inode
inode->i_state |= I_WILL_FREE;
spin_unlock(&inode_lock);
generic_sync_sb_inodes()
spin_lock(&inode_lock);
__iget(inode);
__writeback_single_inode
// see non zero i_count
may WARN here ==> WARN_ON(inode->i_state & I_WILL_FREE);
spin_unlock(&inode_lock);
may call generic_forget_inode again ==> iput(inode);
The above race and warning didn't turn up because writeback_inodes() holds
the s_umount lock, so generic_forget_inode() finds MS_ACTIVE and returns
early. But we are not sure the UBIFS calls and future callers will
guarantee that. So skip I_WILL_FREE inodes for the sake of safety.
Cc: Eric Sandeen <sandeen@sandeen.net>
Acked-by: Jeff Layton <jlayton@redhat.com>
Cc: Masayoshi MIZUMA <m.mizuma@jp.fujitsu.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Acked-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove __invalidate_mapping_pages atomic variant now that its sole caller
can sleep (fixed in eccb95cee4 ("vfs: fix
lock inversion in drop_pagecache_sb()")).
This fixes softlockups that can occur while in the drop_caches path.
Signed-off-by: Mike Waychison <mikew@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The per-task oom_adj value is a characteristic of its mm more than the
task itself since it's not possible to oom kill any thread that shares the
mm. If a task were to be killed while attached to an mm that could not be
freed because another thread were set to OOM_DISABLE, it would have
needlessly been terminated since there is no potential for future memory
freeing.
This patch moves oomkilladj (now more appropriately named oom_adj) from
struct task_struct to struct mm_struct. This requires task_lock() on a
task to check its oom_adj value to protect against exec, but it's already
necessary to take the lock when dereferencing the mm to find the total VM
size for the badness heuristic.
This fixes a livelock if the oom killer chooses a task and another thread
sharing the same memory has an oom_adj value of OOM_DISABLE. This occurs
because oom_kill_task() repeatedly returns 1 and refuses to kill the
chosen task while select_bad_process() will repeatedly choose the same
task during the next retry.
Taking task_lock() in select_bad_process() to check for OOM_DISABLE and in
oom_kill_task() to check for threads sharing the same memory will be
removed in the next patch in this series where it will no longer be
necessary.
Writing to /proc/pid/oom_adj for a kthread will now return -EINVAL since
these threads are immune from oom killing already. They simply report an
oom_adj value of OOM_DISABLE.
Cc: Nick Piggin <npiggin@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Export all page flags faithfully in /proc/kpageflags.
11. KPF_MMAP (pseudo flag) memory mapped page
12. KPF_ANON (pseudo flag) memory mapped page (anonymous)
13. KPF_SWAPCACHE page is in swap cache
14. KPF_SWAPBACKED page is swap/RAM backed
15. KPF_COMPOUND_HEAD (*)
16. KPF_COMPOUND_TAIL (*)
17. KPF_HUGE hugeTLB pages
18. KPF_UNEVICTABLE page is in the unevictable LRU list
19. KPF_HWPOISON(TBD) hardware detected corruption
20. KPF_NOPAGE (pseudo flag) no page frame at the address
32-39. more obscure flags for kernel developers
(*) For compound pages, exporting _both_ head/tail info enables
users to tell where a compound page starts/ends, and its order.
The accompanying page-types tool will handle the details like decoupling
overloaded flags and hiding obscure flags to normal users.
Thanks to KOSAKI and Andi for their valuable recommendations!
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ensure the client requested maximum requests are between 1 and
NFSD_MAX_SLOTS_PER_SESSION
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
send_sigio_to_task() reads fown->signum several times, we can race with
F_SETSIG which changes ->signum lockless. In theory, this can fool
security checks or we can call group_send_sig_info() with the wrong
->si_signo which does not match "int sig".
Change the code to cache ->signum.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shift current_cred() from __f_setown() to f_modown(). This reduces
the number of arguments and saves 48 bytes from fs/fcntl.o.
[ Note: this doesn't clear euid/uid when pid is set to NULL. But if
f_owner.pid == NULL we never use f_owner.uid/euid. Otherwise we'd
have a bug anyway: we must not send signals if pid was reset to NULL. ]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (64 commits)
debugfs: use specified mode to possibly mark files read/write only
debugfs: Fix terminology inconsistency of dir name to mount debugfs filesystem.
xen: remove driver_data direct access of struct device from more drivers
usb: gadget: at91_udc: remove driver_data direct access of struct device
uml: remove driver_data direct access of struct device
block/ps3: remove driver_data direct access of struct device
s390: remove driver_data direct access of struct device
parport: remove driver_data direct access of struct device
parisc: remove driver_data direct access of struct device
of_serial: remove driver_data direct access of struct device
mips: remove driver_data direct access of struct device
ipmi: remove driver_data direct access of struct device
infiniband: ehca: remove driver_data direct access of struct device
ibmvscsi: gadget: at91_udc: remove driver_data direct access of struct device
hvcs: remove driver_data direct access of struct device
xen block: remove driver_data direct access of struct device
thermal: remove driver_data direct access of struct device
scsi: remove driver_data direct access of struct device
pcmcia: remove driver_data direct access of struct device
PCIE: remove driver_data direct access of struct device
...
Manually fix up trivial conflicts due to different direct driver_data
direct access fixups in drivers/block/{ps3disk.c,ps3vram.c}
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
ocfs2/net: Use wait_event() in o2net_send_message_vec()
ocfs2: Adjust rightmost path in ocfs2_add_branch.
ocfs2: fdatasync should skip unimportant metadata writeout
ocfs2: Remove redundant gotos in ocfs2_mount_volume()
ocfs2: Add statistics for the checksum and ecc operations.
ocfs2 patch to track delayed orphan scan timer statistics
ocfs2: timer to queue scan of all orphan slots
ocfs2: Correct ordering of ip_alloc_sem and localloc locks for directories
ocfs2: Fix possible deadlock in quota recovery
ocfs2: Fix possible deadlock with quotas in ocfs2_setattr()
ocfs2: Fix lock inversion in ocfs2_local_read_info()
ocfs2: Fix possible deadlock in ocfs2_global_read_dquot()
ocfs2: update comments in masklog.h
ocfs2: Don't printk the error when listing too many xattrs.
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
block: remove some includings of blktrace_api.h
mg_disk: seperate mg_disk.h again
block: Introduce helper to reset queue limits to default values
cfq: remove extraneous '\n' in blktrace output
ubifs: register backing_dev_info
btrfs: properly register fs backing device
block: don't overwrite bdi->state after bdi_init() has been run
cfq: cleanup for last_end_request in cfq_data
Commit fec1878fe9 caused a regression in
which contiguous blocks being allocated to the end of an extent were
getting a new extent created. This typically results in files entirely
made up of 1-block extents even though the blocks are contiguous on
disk.
Apparently grub doesn't handle a jfs file being fragmented into too many
extents, since it refuses to boot a kernel from jfs that was created by
the 2.6.30 kernel.
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Reported-by: Alex <alevkovich@tut.by>
the change is valid for both the forechannel and the backchannel (currently dummy)
Signed-off-by: Alexandros Batsakis <Alexandros.Batsakis@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
When porting blktrace to tracepoints, we changed to trace/block.h
for trace prober declarations.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
btrfs assigns this bdi to all inodes on that file system, so make
sure it's registered. This isn't really important now, but will be
when we put dirty inodes there. Even now, we miss the stats when the
bdi isn't visible.
Also fixes failure to check bdi_init() return value, and bad inherit of
->capabilities flags from the default bdi.
Acked-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This patch (as1239) updates the kernel's treatment of Unicode. The
character-set conversion routines are well behind the current state of
the Unicode specification: They don't recognize the existence of code
points beyond plane 0 or of surrogate pairs in the UTF-16 encoding.
The old wchar_t 16-bit type is retained because it's still used in
lots of places. This shouldn't cause any new problems; if a
conversion now results in an invalid 16-bit code then before it must
have yielded an undefined code.
Difficult-to-read names like "utf_mbstowcs" are replaced with more
transparent names like "utf8s_to_utf16s" and the ordering of the
parameters is rationalized (buffer lengths come immediate after the
pointers they refer to, and the inputs precede the outputs).
Fortunately the low-level conversion routines are used in only a few
places; the interfaces to the higher-level uni2char and char2uni
methods have been left unchanged.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
utf8_wcstombs forgot to include one-byte UTF-8 characters when
calculating the output buffer size, i.e., theoretically, it was possible
to overflow the output buffer with an input string that contains enough
ASCII characters.
In practice, this was no problem because the only user so far (VFAT)
always uses a big enough output buffer.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When utf8_wcstombs encounters a character that cannot be encoded, we
must not decrease the remaining output buffer size because nothing has
been written to the output buffer.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In many SoC implementations there are hardware registers can be read or
write only. This extends the debugfs to enforce the file permissions for
these types of registers by providing a set of fops which are read or
write only. This assumes that the kernel developer knows more about the
hardware than the user (even root users) -- which is normally true.
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix an error in debugfs_create_blob's docbook description
It cannot actually be used to write a binary blob.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
debugfs: dont stop on first failed recursive delete
While running a while loop of removing a module that removes a debugfs
directory with debugfs_remove_recursive, and at the same time doing a
while loop of cat of a file in that directory, I would hit a point where
somehow the cat of the file caused the remove to fail.
The result is that other files did not get removed when the module
was removed. I simple read of one of those file can oops the kernel
because the operations to the file no longer exist (removed by module).
The funny thing is that the file being cat'ed was removed. It was
the siblings that were not. I see in the code to debugfs_remove_recursive
there's a test that checks if the child fails to bail out of the loop
to prevent an infinite loop.
What this patch does is to still try any siblings in that directory.
If all the siblings fail, or there are no more siblings, then we exit
the loop.
This fixes the above symptom, but...
This is no full proof. It makes the debugfs_remove_recursive a bit more
robust, but it does not explain why the one file failed. There may
be some kind of delay deletion that makes the debugfs think it did
not succeed. So this patch is more of a fix for the symptom but not
the disease.
This patch still makes the debugfs_remove_recursive more robust and
until I can find out why the bug exists, this patch will keep
the kernel from oopsing in most cases. Even after the cause is found
I think this change can stand on its own and should be kept.
[ Impact: prevent kernel oops on module unload and reading debugfs files ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There is the possiblity of a memory leak if a page is allocated and if
sysfs_getlink() fails in the sysfs_follow_link.
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
kill off obscure macro 'PROC' of NFSv2&3 in order to make the code more clear.
Among other things, this makes it simpler to grep for callers of these
functions--something which has frequently caused confusion among nfs
developers.
Signed-off-by: Yu Zhiguo <yuzg@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
There's no need to check host_err >= 0 every time here when we could
check host_err < 0 once, following the usual kernel style.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This is a relatively self-contained piece of code that handles a special
case--move it to its own function.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Updating last_ino and last_dev probably isn't useful in the !use_wgather
case.
Also remove some pointless ifdef'd-out code.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
NFSv3 and above can use unstable writes whenever they are sending more
than one write, rather than relying on the flaky write gathering
heuristics. More often than not, write gathering is currently getting it
wrong when the NFSv3 clients are sending a single write with FILE_SYNC
for efficiency reasons.
This patch turns off write gathering for NFSv3/v4, and ensures that
it only applies to the one case that can actually benefit: namely NFSv2.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
commit_fs_roots skips updating root items for fs trees that aren't modified.
This is unsafe now that relocation code modifies root item's last_snapshot
field without modifying corresponding fs tree.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Replace wait_event_interruptible() with wait_event() in o2net_send_message_vec().
This is because this function is called by the dlm that expects signals to be
blocked.
Fixes oss bugzilla#1126
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1126
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
In ocfs2_add_branch, we use the rightmost rec of the leaf extent block
to generate the e_cpos for the newly added branch. In the most case, it
is OK but if the parent extent block's rightmost rec covers more clusters
than the leaf does, it will cause kernel panic if we insert some clusters
in it. The message is something like:
(7445,1):ocfs2_insert_at_leaf:3775 ERROR: bug expression:
le16_to_cpu(el->l_next_free_rec) >= le16_to_cpu(el->l_count)
(7445,1):ocfs2_insert_at_leaf:3775 ERROR: inode 66053, depth 0, count 28,
next free 28, rec.cpos 270, rec.clusters 1, insert.cpos 275, insert.clusters 1
[<fa7ad565>] ? ocfs2_do_insert_extent+0xb58/0xda0 [ocfs2]
[<fa7b08f2>] ? ocfs2_insert_extent+0x5bd/0x6ba [ocfs2]
[<fa7b1b8b>] ? ocfs2_add_clusters_in_btree+0x37f/0x564 [ocfs2]
...
The panic can be easily reproduced by the following small test case
(with bs=512, cs=4K, and I remove all the error handling so that it looks
clear enough for reading).
int main(int argc, char **argv)
{
int fd, i;
char buf[5] = "test";
fd = open(argv[1], O_RDWR|O_CREAT);
for (i = 0; i < 30; i++) {
lseek(fd, 40960 * i, SEEK_SET);
write(fd, buf, 5);
}
ftruncate(fd, 1146880);
lseek(fd, 1126400, SEEK_SET);
write(fd, buf, 5);
close(fd);
return 0;
}
The reason of the panic is that:
the 30 writes and the ftruncate makes the file's extent list looks like:
Tree Depth: 1 Count: 19 Next Free Rec: 1
## Offset Clusters Block#
0 0 280 86183
SubAlloc Bit: 7 SubAlloc Slot: 0
Blknum: 86183 Next Leaf: 0
CRC32: 00000000 ECC: 0000
Tree Depth: 0 Count: 28 Next Free Rec: 28
## Offset Clusters Block# Flags
0 0 1 143368 0x0
1 10 1 143376 0x0
...
26 260 1 143576 0x0
27 270 1 143584 0x0
Now another write at 1126400(275 cluster) whiich will write at the gap
between 271 and 280 will trigger ocfs2_add_branch, but the result after
the function looks like:
Tree Depth: 1 Count: 19 Next Free Rec: 2
## Offset Clusters Block#
0 0 280 86183
1 271 0 143592
So the extent record is intersected and make the following operation bug out.
This patch just try to remove the gap before we add the new branch, so that
the root(branch) rightmost rec will cover the same right position. So in the
above case, before adding branch the tree will be changed to
Tree Depth: 1 Count: 19 Next Free Rec: 1
## Offset Clusters Block#
0 0 271 86183
SubAlloc Bit: 7 SubAlloc Slot: 0
Blknum: 86183 Next Leaf: 0
CRC32: 00000000 ECC: 0000
Tree Depth: 0 Count: 28 Next Free Rec: 28
## Offset Clusters Block# Flags
0 0 1 143368 0x0
1 10 1 143376 0x0
...
26 260 1 143576 0x0
27 270 1 143584 0x0
And after branch add, the tree looks like
Tree Depth: 1 Count: 19 Next Free Rec: 2
## Offset Clusters Block#
0 0 271 86183
1 271 0 143592
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: (22 commits)
nilfs2: support contiguous lookup of blocks
nilfs2: add sync_page method to page caches of meta data
nilfs2: use device's backing_dev_info for btree node caches
nilfs2: return EBUSY against delete request on snapshot
nilfs2: modify list of unsupported features in caveats
nilfs2: enable sync_page method
nilfs2: set bio unplug flag for the last bio in segment
nilfs2: allow future expansion of metadata read out via get info ioctl
NILFS2: Pagecache usage optimization on NILFS2
nilfs2: remove nilfs_btree_operations from btree mapping
nilfs2: remove nilfs_direct_operations from direct mapping
nilfs2: remove bmap pointer operations
nilfs2: remove useless b_low and b_high fields from nilfs_bmap struct
nilfs2: remove pointless NULL check of bpop_commit_alloc_ptr function
nilfs2: move get block functions in bmap.c into btree codes
nilfs2: remove nilfs_bmap_delete_block
nilfs2: remove nilfs_bmap_put_block
nilfs2: remove header file for segment list operations
nilfs2: eliminate removal list of segments
nilfs2: add sufile function that can modify multiple segment usages
...
The members from 'status' in struct sg_io_hdr to the last are used to
transfer information from kernel to user space. The values that user
space sets are just ignored.
Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Move address display into a new function and display the scopeid as part
of the address in /proc/mounts.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
In case of an error returned by file_dirty() 's' is not freed as the cleanup
path is skipped.
Reported by Coverity.
Signed-off-by: Christian Engelmayer <christian.engelmayer@frequentis.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
The VFS handles updating ctime, so we don't need to update the inode's
ctime in ext4_splace_branch() to update the direct or indirect blocks.
This was harmless when we did this in ext3, but in ext4, thanks to
delayed allocation, updating the ctime in ext4_splice_branch() can
cause the ctime to mysteriously jump when the blocks are finally
allocated.
Thanks to Björn Steinbrink for pointing out this problem on the git
mailing list.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
On systems where CONFIG_SHMEM is disabled, mounting tmpfs filesystems can
fail when tmpfs options are used. This is because tmpfs creates a small
wrapper around ramfs which rejects unknown options, and ramfs itself only
supports a tiny subset of what tmpfs supports. This makes it pretty hard
to use the same userspace systems across different configuration systems.
As such, ramfs should ignore the tmpfs options when tmpfs is merely a
wrapper around ramfs.
This used to work before commit c3b1b1cbf0 as previously, ramfs would
ignore all options. But now, we get:
ramfs: bad mount option: size=10M
mount: mounting mdev on /dev failed: Invalid argument
Another option might be to restore the previous behavior, where ramfs
simply ignored all unknown mount options ... which is what Hugh prefers.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Acked-by: Matt Mackall <mpm@selenic.com>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch fixes the mmap/truncate race that was fixed for delayed
allocation by merging ext4_{journalled,normal,da}_writepage() into
ext4_writepage().
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
It is possible to see buffer_heads which are not mapped in the
writepage callback in the following scneario (where the fs blocksize
is 1k and the page size is 4k):
1) truncate(f, 1024)
2) mmap(f, 0, 4096)
3) a[0] = 'a'
4) truncate(f, 4096)
5) writepage(...)
Now if we get a writepage callback immediately after (4) and before an
attempt to write at any other offset via mmap address (which implies we
are yet to get a pagefault and do a get_block) what we would have is the
page which is dirty have first block allocated and the other three
buffer_heads unmapped.
In the above case the writepage should go ahead and try to write the
first blocks and clear the page_dirty flag. Further attempts to write
to the page will again create a fault and result in allocating blocks
and marking page dirty. If we don't write any other offset via mmap
address we would still have written the first block to the disk and
rest of the space will be considered as a hole.
So to address this, we change all of the places where we look for
delayed, unmapped, or unwritten buffer heads, and only check for
delayed or unwritten buffer heads instead.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The function ext4_mb_free_blocks() was using an "unsigned long" to
pass a block number; this will cause 64-bit block numbers to get
truncated on x86 and other 32-bit platforms.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Enhance the inode allocator to take a goal inode number as a
paremeter; if it is specified, it takes precedence over Orlov or
parent directory inode allocation algorithms.
The extents migration function uses the goal inode number so that the
extent trees allocated the migration function use the correct flex_bg.
In the future, the goal inode functionality will also be used to
allocate an adjacent inode for the extended attributes.
Also, for testing purposes the goal inode number can be specified via
/sys/fs/{dev}/inode_goal. This can be useful for testing inode
allocation beyond 2^32 blocks on very large filesystems.
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Instead of using a random number to determine the goal parent grop for
the Orlov top directories, use a hash of the directory name. This
allows for repeatable results when trying to benchmark filesystem
layout algorithms.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We're running out of space in the mount options word, and
EXT4_MOUNT_ABORT isn't really a mount option, but a run-time flag. So
move it to become EXT4_MF_FS_ABORTED in s_mount_flags.
Also remove bogus ext2_fs.h / ext4.h simultaneous #include protection,
which can never happen.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This field can be very helpful when a system administrator is trying
to sort through large numbers of block devices or filesystem images.
What is stored in this field can be ambiguous if multiple filesystem
namespaces are in play; what we store in practice is the mountpoint
interpreted by the process's namespace which first opens a file in the
filesystem.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We can only fit 32 options in s_mount_opt because an unsigned long is
32-bits on a x86 machine. So use an unsigned int to save space on
64-bit platforms.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The EXT4_IOC_MOVE_EXT exchanges the blocks between orig_fd and donor_fd,
and then write the file data of orig_fd to donor_fd.
ext4_mext_move_extent() is the main fucntion of ext4 online defrag,
and this patch includes all functions related to ext4 online defrag.
Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com>
Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
...to consolidate some logic used in more than one place.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
show_options is always called with the namespace_sem held. Therefore we
don't need to worry about the vfsmount being NULL, or it vanishing while
the function is running. By the same token, there's no need to worry
about the superblock, tcon, smb or tcp sessions being NULL on entry.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Identation got messed up when merging the current_umask changes with
the generic ACL support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Fix warnings about unitialized dquot variables by making sure
xfs_qm_vop_dqalloc touches it even when quotas are disabled.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/configfs:
configfs: Rework configfs_depend_item() locking and make lockdep happy
configfs: Silence lockdep on mkdir() and rmdir()
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
dlm: use more NOFS allocation
dlm: connect to nodes earlier
dlm: fix use count with multiple joins
dlm: Make name input parameter of {,dlm_}new_lockspace() const
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (154 commits)
[SCSI] osd: Remove out-of-tree left overs
[SCSI] libosd: Use REQ_QUIET requests.
[SCSI] osduld: use filp_open() when looking up an osd-device
[SCSI] libosd: Define an osd_dev wrapper to retrieve the request_queue
[SCSI] libosd: osd_req_{read,write} takes a length parameter
[SCSI] libosd: Let _osd_req_finalize_data_integrity receive number of out_bytes
[SCSI] libosd: osd_req_{read,write}_kern new API
[SCSI] libosd: Better printout of OSD target system information
[SCSI] libosd: OSD2r05: Attribute definitions
[SCSI] libosd: OSD2r05: Additional command enums
[SCSI] mpt fusion: fix up doc book comments
[SCSI] mpt fusion: Added support for Broadcast primitives Event handling
[SCSI] mpt fusion: Queue full event handling
[SCSI] mpt fusion: RAID device handling and Dual port Raid support is added
[SCSI] mpt fusion: Put IOC into ready state if it not already in ready state
[SCSI] mpt fusion: Code Cleanup patch
[SCSI] mpt fusion: Rescan SAS topology added
[SCSI] mpt fusion: SAS topology scan changes, expander events
[SCSI] mpt fusion: Firmware event implementation using seperate WorkQueue
[SCSI] mpt fusion: rewrite of ioctl_cmds internal generated function
...
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest: (31 commits)
lguest: add support for indirect ring entries
lguest: suppress notifications in example Launcher
lguest: try to batch interrupts on network receive
lguest: avoid sending interrupts to Guest when no activity occurs.
lguest: implement deferred interrupts in example Launcher
lguest: remove obsolete LHREQ_BREAK call
lguest: have example Launcher service all devices in separate threads
lguest: use eventfds for device notification
eventfd: export eventfd_signal and eventfd_fget for lguest
lguest: allow any process to send interrupts
lguest: PAE fixes
lguest: PAE support
lguest: Add support for kvm_hypercall4()
lguest: replace hypercall name LHCALL_SET_PMD with LHCALL_SET_PGD
lguest: use native_set_* macros, which properly handle 64-bit entries when PAE is activated
lguest: map switcher with executable page table entries
lguest: fix writev returning short on console output
lguest: clean up length-used value in example launcher
lguest: Segment selectors are 16-bit long. Fix lg_cpu.ss1 definition.
lguest: beyond ARRAY_SIZE of cpu->arch.gdt
...
* 'cuse' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
CUSE: implement CUSE - Character device in Userspace
fuse: export symbols to be used by CUSE
fuse: update fuse_conn_init() and separate out fuse_conn_kill()
fuse: don't use inode in fuse_file_poll
fuse: don't use inode in fuse_do_ioctl() helper
fuse: don't use inode in fuse_sync_release()
fuse: create fuse_do_open() helper for CUSE
fuse: clean up args in fuse_finish_open() and fuse_release_fill()
fuse: don't use inode in helpers called by fuse_direct_io()
fuse: add members to struct fuse_file
fuse: prepare fuse_direct_io() for CUSE
fuse: clean up fuse_write_fill()
fuse: use struct path in release structure
fuse: misc cleanups
* 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (29 commits)
ide: re-implement ide_pci_init_one() on top of ide_pci_init_two()
ide: unexport ide_find_dma_mode()
ide: fix PowerMac bootup oops
ide: skip probe if there are no devices on the port (v2)
sl82c105: add printk() logging facility
ide-tape: fix proc warning
ide: add IDE_DFLAG_NIEN_QUIRK device flag
ide: respect quirk_drives[] list on all controllers
hpt366: enable all quirks for devices on quirk_drives[] list
hpt366: sync quirk_drives[] list with pdc202xx_{new,old}.c
ide: remove superfluous SELECT_MASK() call from do_rw_taskfile()
ide: remove superfluous SELECT_MASK() call from ide_driveid_update()
icside: remove superfluous ->maskproc method
ide-tape: fix IDE_AFLAG_* atomic accesses
ide-tape: change IDE_AFLAG_IGNORE_DSC non-atomically
pdc202xx_old: kill resetproc() method
pdc202xx_old: don't call pdc202xx_reset() on IRQ timeout
pdc202xx_old: use ide_dma_test_irq()
ide: preserve Host Protected Area by default (v2)
ide-gd: implement block device ->set_capacity method (v2)
...
The advertised flag for not updating the time was wrong.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Regression from commit 28e211700a.
Need to free temporary buffer allocated in xfs_getbmap().
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Hedi Berriche <hedi@sgi.com>
Reported-by: Justin Piszcz <jpiszcz@lucidpixels.com>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Conflicts:
drivers/message/fusion/mptsas.c
fixed up conflict between req->data_len accessors and mptsas driver updates.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
lguest wants to attach eventfds to guest notifications, and lguest is
usually a module.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
To: Davide Libenzi <davidel@xmailserver.org>
This patch adds the ability to trace various aspects of the GFS2
filesystem. The trace points are divided into three groups,
glocks, logging and bmap. These points have been chosen because
they allow inspection of the major internal functions of GFS2
and they are also generic enough that they are unlikely to need
any major changes as the filesystem evolves.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This will remove every bd_mount_sem use in nilfs.
The intended exclusion control was replaced by the previous patch
("nilfs2: correct exclusion control in nilfs_remount function") for
nilfs_remount(), and this patch will replace remains with a new mutex
that this inserts in nilfs object.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
nilfs_remount() changes mount state of a superblock instance. Even
though nilfs accesses other superblock instances during mount or
remount, the mount state was not properly protected in
nilfs_remount().
Moreover, nilfs_remount() has a lock order reversal problem;
nilfs_get_sb() holds:
1. bdev->bd_mount_sem
2. sb->s_umount (sget acquires)
and nilfs_remount() holds:
1. sb->s_umount (locked by the caller in vfs)
2. bdev->bd_mount_sem
To avoid these problems, this patch divides a semaphore protecting
super block instances from nilfs->ns_sem, and applies it to the mount
state protection in nilfs_remount().
With this change, bd_mount_sem use is removed from nilfs_remount() and
the lock order reversal will be resolved. And the new rw-semaphore,
nilfs->ns_super_sem will properly protect the mount state except the
modification from nilfs_error function.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This simplifies the test function passed on the remaining sget()
callsite in nilfs.
Instead of checking mount type (i.e. ro-mount/rw-mount/snapshot mount)
in the test function passed to sget(), this patch first looks up the
nilfs_sb_info struct which the given mount type matches, and then
acquires the super block instance holding the nilfs_sb_info.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This stops using sget() for checking if an r/w-mount or an r/o-mount
exists on the device. This elimination uses a back pointer to the
current mount added to nilfs object.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This will change the way to obtain nilfs object in nilfs_get_sb()
function.
Previously, a preliminary sget() call was performed, and the nilfs
object was acquired from a super block instance found by the sget()
call.
This patch, instead, instroduces a new dedicated function
find_or_create_nilfs(); as the name implies, the function finds an
existent nilfs object from a global list or creates a new one if no
object is found on the device.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The following EBUSY case in nilfs_get_sb() is meaningless. Indeed,
this error code is never returned to the caller.
if (!s->s_root) {
...
} else if (!(s->s_flags & MS_RDONLY)) {
err = -EBUSY;
}
This simply removes the else case.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now that all filesystems provide ->sync_fs methods we can change
__sync_filesystem to only call ->sync_fs.
This gives us a clear separation between periodic writeouts which
are driven by ->write_super and data integrity syncs that go
through ->sync_fs. (modulo file_fsync which is also going away)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The call to ->write_super from __sync_filesystem will go away, so make
sure nilfs2 performs the same actions from inside ->sync_fs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The call to ->write_super from __sync_filesystem will go away, so make
sure jffs2 performs the same actions from inside ->sync_fs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a ->sync_fs method for data integrity syncs. Factor out common code
between affs_put_super, affs_write_super and the new affs_sync_fs into
a helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
unfortunately, for affs (especially for affs directories) we have
no real way to keep track of metadata ownership. So we have to
do more or less what file_fsync() does, but we do *not* need to
call write_super() there.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
kill ext2_sync_file() (along with ext2/fsync.c), get rid of
ext2_update_inode() - it's an alias of ext2_write_inode().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* mark directory data blocks as assoc. metadata
* add new inode to deal with FAT, mark FAT blocks as assoc. metadata of that
* now ->fsync() is trivial both for files and directories
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
fs-internal parts of qnx4_fs.h taken to fs/qnx4/qnx4.h, includes adjusted,
qnx4_fs.h doesn't need unifdef anymore.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* have directory operations use mark_buffer_dirty_inode(),
so that sync_mapping_buffers() would get those.
* make qnx4_write_inode() honour its last argument.
* get rid of insane copies of very ancient "walk the indirect blocks"
in qnx4/fsync - they never matched the actual fs layout and, fortunately,
never'd been called. Again, all this junk is not needed; ->fsync()
should just do sync_mapping_buffers + sync_inode (and if we implement
block allocation for qnx4, we'll need to use mark_buffer_dirty_inode()
for extent blocks)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
writes associated buffers, then does sync_inode() to write
the inode itself (and to make it clean). Depends on
->write_inode() honouring the second argument.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
I think the block_dump output in __mark_inode_dirty is missing dentry locking.
Surely the i_dentry list can change any time, so we may not even *get* a
dentry there. If we do get one by chance, then it would appear to be able to
go away or get renamed at any time...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Some filesystems can call in to sync an inode that is still in the
I_NEW state (eg. ext family, when mounted with -osync). This is OK
because the filesystem has sole access to the new inode, so it can
modify i_state without races (because no other thread should be
modifying it, by definition of I_NEW). Ie. a false positive, so
remove the warnings.
The races are described here 7ef0d7377c,
which is also where the warnings were introduced.
Reported-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
the write_super method is used for
(1) writing back the superblock periodically from pdflush
(2) called just before ->sync_fs for data integerity syncs
We don't need (1) because we have our own peridoc writeout through xfssyncd,
and we don't need (2) because xfs_fs_sync_fs performs a proper synchronous
superblock writeout after all other data and metadata has been written out.
Also remove ->s_dirt tracking as it's only used to decide when too call
->write_super.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This should not trigger anymore, so kill it.
Acked-by: Anton Altaparmakov <aia21@cam.ac.uk>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The only user of the i_cindex element in the inode structure is used
is by the firewire drivers. As part of an attempt to slim down the
inode structure to save memory --- since a typical Linux system will
have hundreds of thousands if not millions of inodes cached, a
reduction in the size inode has high leverage.
The firewire driver does not need i_cindex in any fast path, so it's
simple enough to calculate when it is needed, instead of wasting space
in the inode structure.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: krh@redhat.com
Cc: stefanr@s5r6.in-berlin.de
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Push down lock_super into ->write_super instances and remove it from the
caller.
Following filesystem don't need ->s_lock in ->write_super and are skipped:
* bfs, nilfs2 - no other uses of s_lock and have internal locks in
->write_super
* ext2 - uses BKL in ext2_write_super and has internal calls without s_lock
* reiserfs - no other uses of s_lock as has reiserfs_write_lock (BKL) in
->write_super
* xfs - no other uses of s_lock and uses internal lock (buffer lock on
superblock buffer) to serialize ->write_super. Also xfs_fs_write_super
is superflous and will go away in the next merge window
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
jffs2_write_super is only called from super.c and doesn't use any
functionality from fs.c. So move it over to super.c and make it
static there.
[should go in through the vfs tree as it is a requirement for the
next patch]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Note that since we can't run into contention between remount_fs and write_super
(due to exclusion on s_umount), we have to care only about filesystems that
touch lock_super() on their own. Out of those ext3, ext4, hpfs, sysv and ufs
do need it; fat doesn't since its ->remount_fs() only accesses assign-once
data (basically, it's "we have no atime on directories and only have atime on
files for vfat; force nodiratime and possibly noatime into *flags").
[folded a build fix from hch]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Move BKL into ->put_super from the only caller. A couple of
filesystems had trivial enough ->put_super (only kfree and NULLing of
s_fs_info + stuff in there) to not get any locking: coda, cramfs, efs,
hugetlbfs, omfs, qnx4, shmem, all others got the full treatment. Most
of them probably don't need it, but I'd rather sort that out individually.
Preferably after all the other BKL pushdowns in that area.
[AV: original used to move lock_super() down as well; these changes are
removed since we don't do lock_super() at all in generic_shutdown_super()
now]
[AV: fuse, btrfs and xfs are known to need no damn BKL, exempt]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
