Commit graph

137 commits

Author SHA1 Message Date
Frederic Weisbecker
03303549b1 tracing/ftrace: fix the check on nopped sites
Impact: fix a dynamic tracing failure

Recently, the function and function graph tracers failed to use dynamic
tracing after the following commit:

fa9d13cf13
(ftrace: don't try to __ftrace_replace_code on !FTRACE_FL_CONVERTED rec)

The patch is right except a mistake on the check for the FTRACE_FL_CONVERTED
flag. The code patching is aborted in case of successfully nopped sites.
What we want is the opposite: ignore the callsites that haven't been nopped.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-16 22:15:36 -04:00
Lai Jiangshan
e94142a67f ftrace: remove struct list_head from struct dyn_ftrace
Impact: save memory

The struct dyn_ftrace table is very large, this patch will save
about 50%.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <srostedt@redhat.com>
LKML-Reference: <49BA2C9F.8020009@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-13 11:36:20 +01:00
Lai Jiangshan
850a80cfaa ftrace: use seq_read
Impact: cleanup

VFS layer has tested the file mode, we do not need test it.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <srostedt@redhat.com>
LKML-Reference: <49BA2BAB.6010608@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-13 11:35:31 +01:00
Zhaolei
fa9d13cf13 ftrace: don't try to __ftrace_replace_code on !FTRACE_FL_CONVERTED rec
Do __ftrace_replace_code for !FTRACE_FL_CONVERTED rec will always
fail, we should ignore this rec.

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: "Steven Rostedt ;" <rostedt@goodmis.org>
LKML-Reference: <49BA2472.4060206@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-13 10:25:06 +01:00
Zhaolei
b00f0b6dc1 ftrace: avoid double-free of dyn_ftrace
If dyn_ftrace is freed before ftrace_release(), ftrace_release()
will free it again and make ftrace_free_records wrong.

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: "Steven Rostedt ;" <rostedt@goodmis.org>
LKML-Reference: <49BA23D9.1050900@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-13 10:25:06 +01:00
KOSAKI Motohiro
10dd3ebe21 tracing: fix deadlock when setting set_ftrace_pid
Impact: fix deadlock while using set_ftrace_pid

Reproducer:

	# cd /sys/kernel/debug/tracing
	# echo $$ > set_ftrace_pid

	then, console becomes hung.

Details:

when writing set_ftracepid, kernel callstack is following

	ftrace_pid_write()
		mutex_lock(&ftrace_lock);
		ftrace_update_pid_func()
			mutex_lock(&ftrace_lock);
			mutex_unlock(&ftrace_lock);
		mutex_unlock(&ftrace_lock);

then, system always deadlocks when ftrace_pid_write() is called.

In past days, ftrace_pid_write() used ftrace_start_lock, but
commit e6ea44e9b4 consolidated
ftrace_start_lock to ftrace_lock.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <srostedt@redhat.com>
LKML-Reference: <20090306151155.0778.A69D9226@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-06 12:07:38 +01:00
Steven Rostedt
5e2336a0d4 tracing: make all file_operations const
Impact: cleanup

All file_operations structures should be constant. No one is going to
change them.

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-05 21:46:40 -05:00
Ingo Molnar
c478f87869 Merge branch 'tip/x86/ftrace' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace
Conflicts:
	include/linux/ftrace.h
	kernel/trace/ftrace.c
2009-02-22 18:12:01 +01:00
Steven Rostedt
4377245aa9 ftrace: break out modify loop immediately on detection of error
Impact: added precaution on failure detection

Break out of the modifying loop as soon as a failure is detected.
This is just an added precaution found by code review and was not
found by any bug chasing.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-20 14:30:20 -05:00
Steven Rostedt
000ab69117 ftrace: allow archs to preform pre and post process for code modification
This patch creates the weak functions: ftrace_arch_code_modify_prepare
and ftrace_arch_code_modify_post_process that are called before and
after the stop machine is called to modify the kernel text.

If the arch needs to do pre or post processing, it only needs to define
these functions.

[ Update: Ingo Molnar suggested using the name ftrace_arch_code_modify_*
          over using ftrace_arch_modify_* ]

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-20 13:16:18 -05:00
Frederic Weisbecker
f9349a8f97 tracing/function-graph-tracer: make set_graph_function file support ftrace regex
Impact: trace only functions matching a pattern

The set_graph_function file let one to trace only one or several
chosen functions and follow all their code flow.

Currently, only a constant function name is allowed so this patch
allows the ftrace_regex functions:

- matches all functions that end with "name":
  echo *name > set_graph_function

- matches all functions that begin with "name":
  echo name* > set_graph_function

- matches all functions that contains "name":
  echo *name* > set_graph_function

Example:

echo mutex* > set_graph_function

 0)               |  mutex_lock_nested() {
 0)   0.563 us    |    __might_sleep();
 0)   2.072 us    |  }
 0)               |  mutex_unlock() {
 0)   1.036 us    |    __mutex_unlock_slowpath();
 0)   2.433 us    |  }
 0)               |  mutex_unlock() {
 0)   0.691 us    |    __mutex_unlock_slowpath();
 0)   1.787 us    |  }
 0)               |  mutex_lock_interruptible_nested() {
 0)   0.548 us    |    __might_sleep();
 0)   1.945 us    |  }

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-20 11:36:24 +01:00
Ingo Molnar
ac07bcaa82 Merge branch 'tip/tracing/ftrace' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace 2009-02-18 01:09:07 +01:00
Ingo Molnar
37bd824a35 Merge branches 'tracing/ftrace' and 'tracing/urgent' into tracing/core 2009-02-18 01:08:13 +01:00
Frederic Weisbecker
5b058bcde9 tracing/function-graph-tracer: trace the idle tasks
When the function graph tracer is activated, it iterates over the task_list
to allocate a stack to store the return addresses.

But the per cpu idle tasks are not iterated by using
do_each_thread / while_each_thread.

So we have to iterate on them manually.

This fixes somes weirdness in the traces and many losses of traces.
Examples on two cpus:

 0)   Xorg-4287    |   2.906 us    |              }
 0)   Xorg-4287    |   3.965 us    |            }
 0)   Xorg-4287    |   5.302 us    |          }
 ------------------------------------------
 0)   Xorg-4287    =>    <idle>-0
 ------------------------------------------

 0)    <idle>-0    |   2.861 us    |                        }
 0)    <idle>-0    |   0.526 us    |                        set_normalized_timespec();
 0)    <idle>-0    |   7.201 us    |                      }
 0)    <idle>-0    |   8.214 us    |                    }
 0)    <idle>-0    |               |                    clockevents_program_event() {
 0)    <idle>-0    |               |                      lapic_next_event() {
 0)    <idle>-0    |   0.510 us    |                        native_apic_mem_write();
 0)    <idle>-0    |   1.546 us    |                      }
 0)    <idle>-0    |   2.583 us    |                    }
 0)    <idle>-0    | + 12.435 us   |                  }
 0)    <idle>-0    | + 13.470 us   |                }
 0)    <idle>-0    |   0.608 us    |                _spin_unlock_irqrestore();
 0)    <idle>-0    | + 23.270 us   |              }
 0)    <idle>-0    | + 24.336 us   |            }
 0)    <idle>-0    | + 25.417 us   |          }
 0)    <idle>-0    |   0.593 us    |          _spin_unlock();
 0)    <idle>-0    | + 41.869 us   |        }
 0)    <idle>-0    | + 42.906 us   |      }
 0)    <idle>-0    | + 95.035 us   |    }
 0)    <idle>-0    |   0.540 us    |    menu_reflect();
 0)    <idle>-0    | ! 100.404 us  |  }
 0)    <idle>-0    |   0.564 us    |  mce_idle_callback();
 0)    <idle>-0    |               |  enter_idle() {
 0)    <idle>-0    |   0.526 us    |    mce_idle_callback();
 0)    <idle>-0    |   1.757 us    |  }
 0)    <idle>-0    |               |  cpuidle_idle_call() {
 0)    <idle>-0    |               |    menu_select() {
 0)    <idle>-0    |   0.525 us    |      pm_qos_requirement();
 0)    <idle>-0    |   0.518 us    |      tick_nohz_get_sleep_length();
 0)    <idle>-0    |   2.621 us    |    }
[...]
 1)    <idle>-0    |   0.518 us    |              touch_softlockup_watchdog();
 1)    <idle>-0    | + 14.355 us   |            }
 1)    <idle>-0    | + 22.840 us   |          }
 1)    <idle>-0    | + 25.949 us   |        }
 1)    <idle>-0    |               |        handle_irq() {
 1)    <idle>-0    |   0.511 us    |          irq_to_desc();
 1)    <idle>-0    |               |          handle_edge_irq() {
 1)    <idle>-0    |   0.638 us    |            _spin_lock();
 1)    <idle>-0    |               |            ack_apic_edge() {
 1)    <idle>-0    |   0.510 us    |              irq_to_desc();
 1)    <idle>-0    |               |              move_native_irq() {
 1)    <idle>-0    |   0.510 us    |                irq_to_desc();
 1)    <idle>-0    |   1.532 us    |              }
 1)    <idle>-0    |   0.511 us    |              native_apic_mem_write();
 ------------------------------------------
 1)    <idle>-0    =>    cat-5073
 ------------------------------------------

 1)    cat-5073    |   3.731 us    |                    }
 1)    cat-5073    |               |                    run_local_timers() {
 1)    cat-5073    |   0.533 us    |                      hrtimer_run_queues();
 1)    cat-5073    |               |                      raise_softirq() {
 1)    cat-5073    |               |                        __raise_softirq_irqoff() {
 1)    cat-5073    |               |                          /* nr: 1 */
 1)    cat-5073    |   2.718 us    |                        }
 1)    cat-5073    |   3.814 us    |                      }

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17 19:20:17 +01:00
Steven Rostedt
b6887d7916 ftrace: rename _hook to _probe
Impact: clean up

Ingo Molnar did not like the _hook naming convention used by the
select function tracer. Luis Claudio R. Goncalves suggested using
the "_probe" extension. This patch implements the change of
calling the functions and variables "_hook" and replacing them
with "_probe".

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-17 12:32:04 -05:00
Steven Rostedt
6a24a244cd ftrace: clean up coding style
Ingo Molnar pointed out some coding style issues with the recent ftrace
updates. This patch cleans them up.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-17 11:20:26 -05:00
Ingo Molnar
73d3fd96e7 ftrace: fix !CONFIG_DYNAMIC_FTRACE ftrace_swapper_pid definition
Impact: build fix

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17 11:50:42 +01:00
Steven Rostedt
809dcf29ce ftrace: add pretty print to selected fuction traces
This patch adds a call back for the tracers that have hooks to
selected functions. This allows the tracer to show better output
in the set_ftrace_filter file.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-16 23:06:01 -05:00
Steven Rostedt
8fc0c701c5 ftrace: show selected functions in set_ftrace_filter
This patch adds output to show what functions have tracer hooks
attached to them.

  # echo 'sys_open:traceon:4' > /debug/tracing/set_ftrace_filter
  # cat set_ftrace_filter

 #### all functions enabled ####
 sys_open:ftrace_traceon:0000000000000004

  # echo 'do_fork:traceoff:' > set_ftrace_filter
  # cat set_ftrace_filter

 #### all functions enabled ####
 sys_open:ftrace_traceon:0000000000000002
 do_fork:ftrace_traceoff:ffffffffffffffff

Note the 4 changed to a 2. This is because The code was executed twice
since the traceoff was added. If a cat is done again:

 #### all functions enabled ####
 sys_open:ftrace_traceon
 do_fork:ftrace_traceoff:ffffffffffffffff

The number disappears. That is because it will not print a NULL.

Callbacks to allow the tracer to pretty print will be implemented soon.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-16 22:50:06 -05:00
Steven Rostedt
59df055f19 ftrace: trace different functions with a different tracer
Impact: new feature

Currently, the function tracer only gives you an ability to hook
a tracer to all functions being traced. The dynamic function trace
allows you to pick and choose which of those functions will be
traced, but all functions being traced will call all tracers that
registered with the function tracer.

This patch adds a new feature that allows a tracer to hook to specific
functions, even when all functions are being traced. It allows for
different functions to call different tracer hooks.

The way this is accomplished is by a special function that will hook
to the function tracer and will set up a hash table knowing which
tracer hook to call with which function. This is the most general
and easiest method to accomplish this. Later, an arch may choose
to supply their own method in changing the mcount call of a function
to call a different tracer. But that will be an exercise for the
future.

To register a function:

 struct ftrace_hook_ops {
	void			(*func)(unsigned long ip,
					unsigned long parent_ip,
					void **data);
	int			(*callback)(unsigned long ip, void **data);
	void			(*free)(void **data);
 };

 int register_ftrace_function_hook(char *glob, struct ftrace_hook_ops *ops,
				  void *data);

glob is a simple glob to search for the functions to hook.
ops is a pointer to the operations (listed below)
data is the default data to be passed to the hook functions when traced

ops:
 func is the hook function to call when the functions are traced
 callback is a callback function that is called when setting up the hash.
   That is, if the tracer needs to do something special for each
   function, that is being traced, and wants to give each function
   its own data. The address of the entry data is passed to this
   callback, so that the callback may wish to update the entry to
   whatever it would like.
 free is a callback for when the entry is freed. In case the tracer
   allocated any data, it is give the chance to free it.

To unregister we have three functions:

  void
  unregister_ftrace_function_hook(char *glob, struct ftrace_hook_ops *ops,
				void *data)

This will unregister all hooks that match glob, point to ops, and
have its data matching data. (note, if glob is NULL, blank or '*',
all functions will be tested).

  void
  unregister_ftrace_function_hook_func(char *glob,
				 struct ftrace_hook_ops *ops)

This will unregister all functions matching glob that has an entry
pointing to ops.

  void unregister_ftrace_function_hook_all(char *glob)

This simply unregisters all funcs.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-16 22:44:09 -05:00
Steven Rostedt
e6ea44e9b4 ftrace: consolidate mutexes
Impact: clean up

Now that ftrace_lock is a mutex, there is no reason to have three
different mutexes protecting similar data. All the mutex paths
are not in hot paths, so having a mutex to cover more data is
not a problem.

This patch removes the ftrace_sysctl_lock and ftrace_start_lock
and uses the ftrace_lock to protect the locations that were protected
by these locks. By doing so, this change also removes some of
the lock nesting that was taking place.

There are still more mutexes in ftrace.c that can probably be
consolidated, but they can be dealt with later. We need to be careful
about the way the locks are nested, and by consolidating, we can cause
a recursive deadlock.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-16 18:15:31 -05:00
Steven Rostedt
52baf11922 ftrace: convert ftrace_lock from a spinlock to mutex
Impact: clean up

The older versions of ftrace required doing the ftrace list
search under atomic context. Now all the calls are in non-atomic
context. There is no reason to keep the ftrace_lock as a spinlock.

This patch converts it to a mutex.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-16 17:33:14 -05:00
Steven Rostedt
f6180773d9 ftrace: add command interface for function selection
Allow for other tracers to add their own commands for function
selection. This interface gives a trace the ability to name a
command for function selection. Right now it is pretty limited
in what it offers, but this is a building step for more features.

The :mod: command is converted to this interface and also serves
as a template for other implementations.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-16 17:06:02 -05:00
Steven Rostedt
e68746a271 ftrace: enable filtering only when a function is filtered on
Impact: fix to prevent empty set_ftrace_filter and no ftrace output

The function filter is used to only trace a given set of functions.
The filter is enabled when a function name is echoed into the
set_ftrace_filter file. But if the name has a typo and the function
is not found, the filter is enabled, but no function is listed.

This makes a confusing situation where set_ftrace_filter is empty
but no functions ever get enabled for tracing.

For example:

 # cat /debug/tracing/set_ftrace_filter

  #### all functions enabled ####

 # echo bad_name > set_ftrace_filter
 # cat /debug/tracing/set_ftrace_filter

 # echo function > current_tracer
 # cat trace

  # tracer: nop
  #
  #           TASK-PID    CPU#    TIMESTAMP  FUNCTION
  #              | |       |          |         |

This patch changes that to only enable filtering if a function
is set to be filtered on. Now, the filter is not enabled if
a bad name is echoed into set_ftrace_filter.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-16 17:03:49 -05:00
Steven Rostedt
64e7c44061 ftrace: add module command function filter selection
This patch adds a "command" syntax to the function filtering files:

  /debugfs/tracing/set_ftrace_filter
  /debugfs/tracing/set_ftrace_notrace

Of the format:  <function>:<command>:<parameter>

The command is optional, and dependent on the command, so are
the parameters.

 echo do_fork > set_ftrace_filter

Will only trace 'do_fork'.

 echo 'sched_*' > set_ftrace_filter

Will only trace functions starting with the letters 'sched_'.

 echo '*:mod:ext3' > set_ftrace_filter

Will trace only the ext3 module functions.

 echo '*write*:mod:ext3' > set_ftrace_notrace

Will prevent the ext3 functions with the letters 'write' in
the name from being traced.

 echo '!*_allocate:mod:ext3' > set_ftrace_filter

Will remove the functions in ext3 that end with the letters
'_allocate' from the ftrace filter.

Although this patch implements the 'command' format, only the
'mod' command is supported. More commands to follow.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-16 16:55:50 -05:00
Steven Rostedt
9f4801e30a ftrace: break up ftrace_match_records into smaller components
Impact: clean up

ftrace_match_records does a lot of things that other features
can use. This patch breaks up ftrace_match_records and pulls
out ftrace_setup_glob and ftrace_match_record.

ftrace_setup_glob prepares a simple glob expression for use with
ftrace_match_record. ftrace_match_record compares a single record
with a glob type.

Breaking this up will allow for more features to run on individual
records.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-16 16:49:57 -05:00
Steven Rostedt
7f24b31b01 ftrace: rename ftrace_match to ftrace_match_records
Impact: clean up

ftrace_match is too generic of a name. What it really does is
search all records and matches the records with the given string,
and either sets or unsets the functions to be traced depending
on if the parameter 'enable' is set or not.

This allows us to make another function called ftrace_match that
can be used to test a single record.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-16 16:33:15 -05:00
Steven Rostedt
265c831cb0 ftrace: add do_for_each_ftrace_rec and while_for_each_ftrace_rec
Impact: clean up

To iterate over all the functions that dynamic trace knows about
it requires two for loops. One to iterate over the pages and the
other to iterate over the records within the page.

There are several duplications of these loops in ftrace.c. This
patch creates the macros do_for_each_ftrace_rec and
while_for_each_ftrace_rec to handle this logic, and removes the
duplicate code.

While making this change, I also discovered and fixed a small
bug that one of the iterations should exit the loop after it found the
record it was searching for. This used a break when it should have
used a goto, since there were two loops it needed to break out
from.  No real harm was done by this bug since it would only continue
to search the other records, and the code was in a slow path anyway.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-16 16:25:12 -05:00
Steven Rostedt
0c75a3ed63 ftrace: state that all functions are enabled in set_ftrace_filter
Impact: clean up, make set_ftrace_filter less confusing

The set_ftrace_filter shows only the functions that will be traced.
But when it is empty, it will trace all functions. This can be a bit
confusing.

This patch makes set_ftrace_filter show:

  #### all functions enabled ####

When all functions will be traced, and we do not filter only a select
few.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-16 16:21:35 -05:00
Wenji Huang
57794a9d48 trace: trivial fixes in comment typos.
Impact: clean up

Fixed several typos in the comments.

Signed-off-by: Wenji Huang <wenji.huang@oracle.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-07 20:03:36 -05:00
Ingo Molnar
ce70a0b472 Merge branches 'tracing/blktrace', 'tracing/ftrace', 'tracing/urgent' and 'linus' into tracing/core 2009-02-04 20:45:41 +01:00
Oleg Nesterov
229c4ef8ae ftrace: do_each_pid_task() needs rcu lock
"ftrace: use struct pid" commit 978f3a45d9
converted ftrace_pid_trace to "struct pid*".

But we can't use do_each_pid_task() without rcu_read_lock() even if
we know the pid itself can't go away (it was pinned in ftrace_pid_write).
The exiting task can detach itself from this pid at any moment.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-03 22:50:58 +01:00
Frederic Weisbecker
00f57f545a tracing/function-graph-tracer: fix a regression while suspend to disk
Impact: fix a crash while kernel image restore

When the function graph tracer is running and while suspend to disk, some racy
and dangerous things happen against this tracer.

The current task will save its registers including the stack pointer which
contains the return address hooked by the tracer. But the current task will
continue to enter other functions after that to save the memory, and then
it will store other return addresses, and finally loose the old depth which
matches the return address saved in the old stack (during the registers saving).

So on image restore, the code will return to wrong addresses.
And there are other things: on restore, the task will have it's "current"
pointer overwritten during registers restoring....switching from one task to
another... That would be insane to try to trace function graphs at these
stages.

This patch makes the function graph tracer listening on power events, making
it's tracing disabled for the current task (the one that performs the
hibernation work) while suspend/resume to disk, making the tracing safe
during hibernation.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-21 15:21:30 +01:00
Frederic Weisbecker
4a2b8dda3f tracing/function-graph-tracer: fix a regression while suspend to disk
Impact: fix a crash while kernel image restore

When the function graph tracer is running and while suspend to disk, some racy
and dangerous things happen against this tracer.

The current task will save its registers including the stack pointer which
contains the return address hooked by the tracer. But the current task will
continue to enter other functions after that to save the memory, and then
it will store other return addresses, and finally loose the old depth which
matches the return address saved in the old stack (during the registers saving).

So on image restore, the code will return to wrong addresses.
And there are other things: on restore, the task will have it's "current"
pointer overwritten during registers restoring....switching from one task to
another... That would be insane to try to trace function graphs at these
stages.

This patch makes the function graph tracer listening on power events, making
it's tracing disabled for the current task (the one that performs the
hibernation work) while suspend/resume to disk, making the tracing safe
during hibernation.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-15 09:47:40 +01:00
Uwe Kleine-Koenig
32632920a7 ftrace, trivial: fix typo "resgister" -> "register"
Signed-off-by: Uwe Kleine-Koenig <ukleinek@strlen.de>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-14 12:11:49 +01:00
Shaohua Li
f00012074b ftrace, ia64: Add macro for ftrace_caller
Define FTRACE_ADDR. In IA64, a function pointer isn't a 'unsigned long' but a
'struct {unsigned long ip, unsigned long gp}'.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-14 12:11:18 +01:00
Shaohua Li
25aac9dc7c ftrace, ia64: explictly ignore a file in recordmcount.pl
In IA64, a function pointer isn't a 'unsigned long' but a
'struct {unsigned long ip, unsigned long gp}'. MCOUNT_ADDR is determined
at link time not compile time, so explictly ignore kernel/trace/ftrace.o
in recordmcount.pl.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-14 12:11:13 +01:00
Steven Rostedt
431aa3fbf5 ftrace: convert unsigned index to signed
Impact: fix to unsigned compared to less than zero

Roel Kluin pointed out that there is a compare of an unsigned number
to less than zero. A previous clean up had the unsigned index set
to -1 for certain cases, but never converted it to signed.

Frederic Weisbecker noticed that another index is used to compare
the above index to and it also needs to be converted to signed.

[
  Converted ftrace_page->index to int from unsigned long as
  Andrew Morton pointed out that there's no need for it to
  stay a long.
]

Reported-by: Roel Kluin <roel.kluin@gmail.com>
Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-07 10:43:52 +01:00
Steven Rostedt
ea3a6d6d60 ftrace: add not to regex on filtering functions
Impact: enhancement

Ingo Molnar has asked about a way to remove items from the filter
lists. Currently, you can only add or replace items. The way
items are added to the list is through opening one of the list
files (set_ftrace_filter or set_ftrace_notrace) via append.
If the file is opened for truncate, the list is cleared.

  echo spin_lock > /debug/tracing/set_ftrace_filter

The above will replace the list with only spin_lock

  echo spin_lock >> /debug/tracing/set_ftrace_filter

The above will add spin_lock to the list.

Now this patch adds:

  echo '!spin_lock' >> /debug/tracing/set_ftrace_filter

This will remove spin_lock from the list.

The limited glob features of these lists also can be notted.

  echo '!spin_*' >> /debug/tracing/set_ftrace_filter

This will remove all functions that start with 'spin_'

Note:

  echo '!spin_*' > /debug/tracing/set_ftrace_filter

will simply clear out the list (notice the '>' instead of '>>')

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-18 12:57:09 +01:00
Frederic Weisbecker
380c4b1411 tracing/function-graph-tracer: append the tracing_graph_flag
Impact: Provide a way to pause the function graph tracer

As suggested by Steven Rostedt, the previous patch that prevented from
spinlock function tracing shouldn't use the raw_spinlock to fix it.
It's much better to follow lockdep with normal spinlock, so this patch
adds a new flag for each task to make the function graph tracer able
to be paused. We also can send an ftrace_printk whithout worrying of
the irrelevant traced spinlock during insertion.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-08 15:11:45 +01:00
Steven Rostedt
21bbecdaae ftrace: use init_struct_pid as swapper pid
Impact: clean up

Using (struct pid *)-1 as the pointer for ftrace_swapper_pid is
a little confusing for others. This patch uses the address of the
actual init pid structure instead. This change is only for
clarity. It does not affect the code itself. Hopefully soon the
swapper tasks will all have their own pid structure and then
we can clean up the code a bit more.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-05 14:51:29 +01:00
Liming Wang
faec2ec505 ftrace: avoid duplicated function when writing set_graph_function
Impact: fix a bug in function filter setting

when writing function to set_graph_function, we should check whether it
has existed in set_graph_function to avoid duplicating.

Signed-off-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-04 09:42:35 +01:00
Steven Rostedt
e32d895691 ftrace: add ability to only trace swapper tasks
Impact: new feature

This patch lets the swapper tasks of all CPUS be filtered by the
set_ftrace_pid file.

If '0' is echoed into this file, then all the idle tasks (aka swapper)
is flagged to be traced.  This affects all CPU idle tasks.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-04 09:09:38 +01:00
Steven Rostedt
978f3a45d9 ftrace: use struct pid
Impact: clean up, extend PID filtering to PID namespaces

Eric Biederman suggested using the struct pid for filtering on
pids in the kernel. This patch is based off of a demonstration
of an implementation that Eric sent me in an email.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-04 09:09:37 +01:00
Steven Rostedt
804a685162 ftrace: trace single pid for function graph tracer
Impact: New feature

This patch makes the changes to set_ftrace_pid apply to the function
graph tracer.

  # echo $$ > /debugfs/tracing/set_ftrace_pid
  # echo function_graph > /debugfs/tracing/current_tracer

Will cause only the current task to be traced. Note, the trace flags are
also inherited by child processes, so the children of the shell
will also be traced.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-04 09:09:36 +01:00
Steven Rostedt
0ef8cde56a ftrace: use task struct trace flag to filter on pid
Impact: clean up

Use the new task struct trace flags to determine if a process should be
traced or not.

Note: this moves the searching of the pid to the slow path of setting
the pid field. This needs to be converted to the pid name space.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-04 09:09:35 +01:00
Steven Rostedt
ea4e2bc4d9 ftrace: graph of a single function
This patch adds the file:

   /debugfs/tracing/set_graph_function

which can be used along with the function graph tracer.

When this file is empty, the function graph tracer will act as
usual. When the file has a function in it, the function graph
tracer will only trace that function.

For example:

 # echo blk_unplug > /debugfs/tracing/set_graph_function
 # cat /debugfs/tracing/trace
 [...]
 ------------------------------------------
 | 2)  make-19003  =>  kjournald-2219
 ------------------------------------------

 2)               |  blk_unplug() {
 2)               |    dm_unplug_all() {
 2)               |      dm_get_table() {
 2)      1.381 us |        _read_lock();
 2)      0.911 us |        dm_table_get();
 2)      1. 76 us |        _read_unlock();
 2) +   12.912 us |      }
 2)               |      dm_table_unplug_all() {
 2)               |        blk_unplug() {
 2)      0.778 us |          generic_unplug_device();
 2)      2.409 us |        }
 2)      5.992 us |      }
 2)      0.813 us |      dm_table_put();
 2) +   29. 90 us |    }
 2) +   34.532 us |  }

You can add up to 32 functions into this file. Currently we limit it
to 32, but this may change with later improvements.

To add another function, use the append '>>':

  # echo sys_read >> /debugfs/tracing/set_graph_function
  # cat /debugfs/tracing/set_graph_function
  blk_unplug
  sys_read

Using the '>' will clear out the function and write anew:

  # echo sys_write > /debug/tracing/set_graph_function
  # cat /debug/tracing/set_graph_function
  sys_write

Note, if you have function graph running while doing this, the small
time between clearing it and updating it will cause the graph to
record all functions. This should not be an issue because after
it sets the filter, only those functions will be recorded from then on.
If you need to only record a particular function then set this
file first before starting the function graph tracer. In the future
this side effect may be corrected.

The set_graph_function file is similar to the set_ftrace_filter but
it does not take wild cards nor does it allow for more than one
function to be set with a single write. There is no technical reason why
this is the case, I just do not have the time yet to implement that.

Note, dynamic ftrace must be enabled for this to appear because it
uses the dynamic ftrace records to match the name to the mcount
call sites.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-04 09:09:34 +01:00
Steven Rostedt
e49dc19c6a ftrace: function graph return for function entry
Impact: feature, let entry function decide to trace or not

This patch lets the graph tracer entry function decide if the tracing
should be done at the end as well. This requires all function graph
entry functions return 1 if it should trace, or 0 if the return should
not be traced.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 08:56:26 +01:00
Steven Rostedt
14a866c567 ftrace: add ftrace_graph_stop()
Impact: new ftrace_graph_stop function

While developing more features of function graph, I hit a bug that
caused the WARN_ON to trigger in the prepare_ftrace_return function.
Well, it was hard for me to find out that was happening because the
bug would not print, it would just cause a hard lockup or reboot.
The reason is that it is not safe to call printk from this function.

Looking further, I also found that it calls unregister_ftrace_graph,
which grabs a mutex and calls kstop machine. This would definitely
lock the box up if it were to trigger.

This patch adds a fast and safe ftrace_graph_stop() which will
stop the function tracer. Then it is safe to call the WARN ON.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 08:56:23 +01:00
Ingo Molnar
f0461d0146 Merge branches 'tracing/ftrace' and 'tracing/function-graph-tracer' into tracing/core 2008-12-03 08:49:21 +01:00