Commit graph

20 commits

Author SHA1 Message Date
Axel Lin
b00e126ffe MISC: convert drivers/misc/* to use module_platform_driver()
This patch converts the drivers in drivers/misc/* to use the
module_platform_driver() macro which makes the code smaller and a bit
simpler.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Ira W. Snyder <iws@ovro.caltech.edu>
Cc: Pavan Savoy <pavan_savoy@ti.com>
Cc: Donggeun Kim <dg77.kim@samsung.com>
Acked-By: Pratyush Anand <pratyush.anand@st.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24 16:31:48 -08:00
Pavan Savoy
933aae54be drivers:misc: ti-st: DEBUG uart, baud rate mods
To debug different UARTs at different baud-rates connected to the WiLink
connectivity combo-chipset, this patch enables the debugging code so that upon
boot different UARTs at different baud-rates can be tried out to verify the
interface with WiLink.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04 15:21:04 -08:00
Pavan Savoy
18ccecf99a drivers:misc: ti-st: flush UART upon fw failure
Upon failure to read firmware version from chip or upon failure in responses
to firmware download the UART needs to be flushed of its existing buffers so
that the UIM can restart UART properly.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04 15:21:04 -08:00
Paul Gortmaker
eb12a679b2 drivers/misc: Add module.h to files who are really modular.
These files really need the full module.h header file present, but
were just getting it implicitly before.  Fix it up in advance so we
avoid build failures once the cleanup commit is present.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:53 -04:00
Pavan Savoy
76ff0e64d4 drivers:misc: ti-st: free skb on firmware download
If during validation of the firmware download the data doesn't match what is
expected out of the chip, this calls for a firmware download failure and a
retry.
Free the SKB which collects response during such scenarios.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-22 14:13:34 -07:00
Pavan Savoy
d0344ef670 drivers:misc: ti-st: wait for completion at fail
When the line discipline install fails for reasons such as missing user-space
UIM or broken communication between UIM and ST driver, then the ST
attempts/retries to request for ldisc installation again.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-22 14:13:34 -07:00
Pavan Savoy
2f81a02ce0 drivers:misc: ti-st: reinit completion before send
download firmware behaves differently at different times, when logs are
enabled and the system is loaded, the wait_for_completion is able to wait for
every send, However during other times the wait does not happen.

So, for reliability reinitializing the completion before every send, makes
sure the wait happens for every send.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-22 14:13:33 -07:00
Pavan Savoy
74a4fcf19e drivers:misc: ti-st: reinit completion on ver read
After the version information has been read, the completion which assists in
wait_for_completion during the firmware send/wait sequence is being re-used
and hence this needs to be re-initialised for fool proof firmware download
retries.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-22 14:13:32 -07:00
Pavan Savoy
0d7c5f2572 drivers:misc:ti-st: platform hooks for chip states
Certain platform specific or Host-WiLink Interface specific actions would be
required to be taken when the chip is being enabled and after the chip is
disabled such as configuration of the mux modes for the GPIO of host connected
to the nshutdown of the chip or relinquishing UART after the chip is disabled.

Similar actions can also be taken when the chip is in deep sleep or when the
chip is awake. Performance enhancements such as configuring the host to run
faster when chip is awake and slower when chip is asleep can also be made
here.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-22 14:13:32 -07:00
Shahar Lev
9d031d94da drivers:misc: ti-st: fix skipping of change remote baud
Before the incrementing of ptr in skip_change_remote_baud,
it points to cur_action, but the increment is done by
the size of nxt_action instead. This could cause ptr
to not point to a bts_action structure, which is
harmful for the increment of ptr done in download_firmware.
Therefore, the skipping is first done for cur_action.

Signed-off-by: Shahar Lev <shahar@wizery.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 10:01:18 -07:00
Steven Rostedt
7316a9f2a9 st_kim: Handle case of no device found for ID 0
Running ktest.pl, I hit this bug:

[   19.780654] BUG: unable to handle kernel NULL pointer dereference at 0000000c
[   19.780660] IP: [<c112efcd>] dev_get_drvdata+0xc/0x46
[   19.780669] *pdpt = 0000000031daf001 *pde = 0000000000000000
[   19.780673] Oops: 0000 [#1] SMP
[   19.780680] Dumping ftrace buffer:^M
[   19.780685]    (ftrace buffer empty)
[   19.780687] Modules linked in: ide_pci_generic firewire_ohci firewire_core evbug crc_itu_t e1000 ide_core i2c_i801 iTCO_wdt
[   19.780697]
[   19.780700] Pid: 346, comm: v4l_id Not tainted 2.6.39-test-02740-gcaebc16-dirty #4                  /DG965MQ
[   19.780706] EIP: 0060:[<c112efcd>] EFLAGS: 00010202 CPU: 0
[   19.780709] EIP is at dev_get_drvdata+0xc/0x46
[   19.780712] EAX: 00000008 EBX: f1e37da4 ECX: 00000000 EDX: 00000000
[   19.780715] ESI: f1c3f200 EDI: c33ec95c EBP: f1e37d80 ESP: f1e37d80
[   19.780718]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[   19.780721] Process v4l_id (pid: 346, ti=f1e36000 task=f2bc2a60 task.ti=f1e36000)
[   19.780723] Stack:
[   19.780725]  f1e37d8c c117d395 c33ec93c f1e37db4 c117a0f9 00000002 00000000 c1725e54
[   19.780732]  00000001 00000007 f2918c90 f1c3f200 c33ec95c f1e37dd4 c1789d3d 22222222
[   19.780740]  22222222 22222222 f2918c90 f1c3f200 f29194f4 f1e37de8 c178d5c4 c1725e54
[   19.780747] Call Trace:
[   19.780752]  [<c117d395>] st_kim_ref+0x28/0x41
[   19.780756]  [<c117a0f9>] st_register+0x29/0x562
[   19.780761]  [<c1725e54>] ? v4l2_open+0x111/0x1e3
[   19.780766]  [<c1789d3d>] fmc_prepare+0x97/0x424
[   19.780770]  [<c178d5c4>] fm_v4l2_fops_open+0x70/0x106
[   19.780773]  [<c1725e54>] ? v4l2_open+0x111/0x1e3
[   19.780777]  [<c1725e9b>] v4l2_open+0x158/0x1e3
[   19.780782]  [<c065173b>] chrdev_open+0x22c/0x276
[   19.780787]  [<c0647c4e>] __dentry_open+0x35c/0x581
[   19.780792]  [<c06498f9>] nameidata_to_filp+0x7c/0x96
[   19.780795]  [<c065150f>] ? cdev_put+0x57/0x57
[   19.780800]  [<c0660cad>] do_last+0x743/0x9d4
[   19.780804]  [<c065d5fc>] ? path_init+0x1ee/0x596
[   19.780808]  [<c0661481>] path_openat+0x10c/0x597
[   19.780813]  [<c05204a1>] ? trace_hardirqs_off+0x27/0x37
[   19.780817]  [<c0509651>] ? local_clock+0x78/0xc7
[   19.780821]  [<c0661945>] do_filp_open+0x39/0xc2
[   19.780827]  [<c1cabc76>] ? _raw_spin_unlock+0x4c/0x5d^M
[   19.780831]  [<c0674ccd>] ? alloc_fd+0x19e/0x1b7
[   19.780836]  [<c06499ca>] do_sys_open+0xb7/0x1bd
[   19.780840]  [<c0608eea>] ? sys_munmap+0x78/0x8d
[   19.780844]  [<c0649b06>] sys_open+0x36/0x58
[   19.780849]  [<c1cb809f>] sysenter_do_call+0x12/0x38
[   19.780852] Code: d8 2f 20 c3 01 83 15 dc 2f 20 c3 00 f0 ff 00 83 05 e0 2f 20 c3 01 83 15 e4 2f 20 c3 00 5d c3 55 89 e5 3e 8d 74 26 00 85 c0 74 28 <8b> 40 04 83 05 e8 2f 20 c3 01 83 15 ec 2f 20 c3 00 85 c0 74 13 ^M
[   19.780889] EIP: [<c112efcd>] dev_get_drvdata+0xc/0x46 SS:ESP 0068:f1e37d80
[   19.780894] CR2: 000000000000000c
[   19.780898] ---[ end trace e7d1d0f6a2d1d390 ]---

The id of 0 passed to st_kim_ref() found no device, keeping pdev null,
and causing pdev->dev cause a NULL pointer dereference. After having
st_kim_ref() check for NULL, the st_unregister() function needed to be
updated to handle the case that st_gdata was not set by the
st_kim_ref().

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 10:01:16 -07:00
Randy Dunlap
773d67903a misc: fix ti-st build issues
st_drv uses skb*() interfaces, so it should depend on NET.
It also uses GPIO interfaces, so it should depend on GPIOLIB.

st_kim.c uses syss_*() calls, so it should #include
<linux/sysfs.h>.

Fixes these observed build errors:
ERROR: "skb_queue_purge" [drivers/misc/ti-st/st_drv.ko] undefined!
ERROR: "skb_pull" [drivers/misc/ti-st/st_drv.ko] undefined!
ERROR: "skb_queue_tail" [drivers/misc/ti-st/st_drv.ko] undefined!
ERROR: "__alloc_skb" [drivers/misc/ti-st/st_drv.ko] undefined!
ERROR: "kfree_skb" [drivers/misc/ti-st/st_drv.ko] undefined!
ERROR: "skb_dequeue" [drivers/misc/ti-st/st_drv.ko] undefined!
ERROR: "skb_put" [drivers/misc/ti-st/st_drv.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 14:11:03 -07:00
Lucas De Marchi
25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Pavan Savoy
781a7395d2 drivers:misc: ti-st: remove multiple gpio handling
TI shared transport driver previously intended to expose rfkill
entries for each of the protocol gpio that the chip would have.
However now in case such gpios exist, which requires to be enabled
for a specific protocol, the responsibility lay on protocol driver.
This patch removes the request/free of multiple gpios, rfkill struct
references and also removes the chip_toggle function.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-04 12:41:21 -08:00
Pavan Savoy
ef04d121f0 drivers:misc: ti-st: firmware download optimization
To fasten the process of firmware download, the chip allows
disabling of the command complete event generation from host.
In these cases, only few very essential commands would have
the command complete events and hence the wait associated with
them.

So now the driver would wait for a command complete event, only
when it comes across a wait event during firmware parsing.
This would also mean we need to skip not just the change baud
rate command but also the wait for it.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-04 12:41:21 -08:00
Pavan Savoy
704426649d drivers:misc: ti-st: fix error codes
set-right the error codes that the shared transport driver
returns.
Instead of magic numbers like -1, return relevant codes such as
ETIMEDOUT or EIO, EAGAIN when wait times out or uart write bytes don't
match expected value or when registration fails and needs to be
attempted again.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-04 12:41:20 -08:00
Pavan Savoy
ec60d0ad20 drivers:misc: ti-st: move from rfkill to sysfs
The communication between ST KIM and UIM was interfaced
over the /dev/rfkill device node.
Move the interface to a simpler less abusive sysfs entry
mechanism and document it in Documentation/ABI/testing/
under sysfs-platform-kim.

Shared transport driver would now read the UART details
originally received by bootloader or firmware as platform
data.
The data read will be shared over sysfs entries for the user-space
UIM or other n/w manager/plugins to be read, and assist the driver
by opening up the UART, setting the baud-rate and installing the
line discipline.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-04 12:41:20 -08:00
Pavan Savoy
5c88b02196 drivers:misc: ti-st: register with channel IDs
The architecture of shared transport had begun with individual
protocols like bluetooth, fm and gps telling the shared transport
what sort of protocol they are and then expecting the ST driver
to parse the incoming data from chip and forward data only
relevant to the protocol drivers.

This change would mean each protocol drivers would also send
information to ST driver as to how to intrepret their protocol
data coming out of the chip.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-04 12:41:20 -08:00
Pavan Savoy
73f12e8d3d drivers: misc: ti-st: fix review comments
Based on comments from Jiri Slaby, drop the register
storage specifier, remove the unused code, cleanup
the const to non-const type casting.
Also make the line discipline ops structure static, since
its a singleton, unmodified structure which need not be
in heap.

Reported-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-14 12:41:10 -07:00
Pavan Savoy
a0cc2f3b51 staging: ti-st: move TI_ST from staging to misc/
move the 3 source files st_core.c, st_kim.c and st_ll.c
from staging to drivers/misc/.

Texas Instrument's WiLink 7 chipset packs wireless technologies like
Bluetooth, FM, GPS and WLAN into a single die.
Among these the Bluetooth, FM Rx/Tx and GPS are interfaced to a apps processor
over a single UART.

This line discipline driver allows various protocol drivers such as Bluetooth
BlueZ driver, FM V4L2 driver and GPS simple character device driver
to communicate with its relevant core in the chip.

Each protocol or technologies use a logical channel to communicate with chip.
Bluetooth uses the HCI-H4 [channels 1-4], FM uses a CH-8 and
GPS a CH-9 protocol. The driver also constitutes the TI HCI-LL Power
Management protocol which use channels 30-33.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-06 08:25:06 -07:00
Renamed from drivers/staging/ti-st/st_kim.c (Browse further)