Commit graph

14 commits

Author SHA1 Message Date
David S. Miller
bd28063582 ks8842: Fix warnings on 64-bit.
drivers/net/ks8842.c:922:26: warning: cast from pointer to integer of different size
drivers/net/ks8842.c:940:17: warning: cast to pointer from integer of different size
drivers/net/ks8842.c:963:17: warning: cast to pointer from integer of different size

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27 22:24:37 -07:00
Richard Röjfors
94fe8c683c ks8842: Support DMA when accessed via timberdale
This patch adds support for RX and TX DMA via the DMA API,
this is only supported when the KS8842 is accessed via timberdale.

There is no support for DMA on the generic bus interface it self,
a state machine inside the FPGA is handling RX and TX transfers to/from
buffers in the FPGA. The host CPU can do DMA to and from these buffers.

The FPGA has to handle the RX interrupts, so these must be enabled in
the ks8842 but not in the FPGA. The driver must not disable the RX interrupt
that would mean that the data transfers into the FPGA buffers would stop.

The host shall not enable TX interrupts since TX is handled by the FPGA,
the host is notified by DMA callbacks when transfers are finished.

Which DMA channels to use are added as parameters in the platform data struct.

Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27 20:48:19 -07:00
Richard Röjfors
db5824dd3d ks8842: Support 100Mbps when accessed via timberdale
This patch removes the code which disables 100Mbps advertising when
the ks8842 is accessed via timberdale.

At higher speed it's good to be nice to the internal state machine
of timberdale by acking interrupts. That is done by a write to the
interrupt ack register (IAR).

Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26 21:05:03 -07:00
David S. Miller
e2df8b7f66 ks8842: Fix ks8842_tx_frame() for 16bit case.
As reported by Andrew:

drivers/net/ks8842.c: In function 'ks8842_handle_rx':
drivers/net/ks8842.c:428: warning: 'status' may be used uninitialized in this function

Just use the 32-bit status for all reads, and delete the useless
cast to 'int' when reading a u16 into 'len'.

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19 15:25:04 -07:00
David J. Choi
28bd620c7a drivers/net: Add Micrel KS8841/42 support to ks8842 driver
Body of the explanation:
   -support 16bit and 32bit bus width.
   -add device reset for ks8842/8841 Micrel device.
   -set 100Mbps as a default for Micrel device.
   -set MAC address in both MAC/Switch layer with different sequence for Micrel
    device, as mentioned in data sheet.
   -use private data to set options both 16/32bit bus width and Micrel device/
    Timberdale(FPGA).
   -update Kconfig in order to put more information about ks8842 device.

Signed-off-by: David J. Choi <david.choi@micrel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-13 10:13:49 -07:00
Richard Röjfors
3038bdb122 ks8842: Remove unnecessary bank select.
This patch removes an unnecessary bank select before resetting the
controller.

Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-08 23:40:20 -07:00
Richard Röjfors
cc88e450ad ks8842: Do the TX timeout work in workqueue context.
Currently all code that needs to be run at TX timeout is done in the
calling context, where bottom halves are disabled. Some of the code
blocks, so it needs to be done in a different context. This patch
adds in a work struct which is scheduled at TX timeout. Then the
timeout code is executed within work queue context.

Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-08 23:40:19 -07:00
Richard Röjfors
a99db196db ks8842: Replace usage of dev_dbg with netdev_dbg
This patch replaces all usage of dev_dbg with netdev_dbg.

A side effect is that the pointer to the platform device in the adapter
struct can be removed.

Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-05 18:50:56 -07:00
Richard Röjfors
a1aa8822d5 ks8842: Add platform data for setting mac address
This patch adds platform data to the ks8842 driver.

Via the platform data a MAC address, to be used by the controller,
can be passed.

To ensure this MAC address is used, the MAC address is written
after each hardware reset.

Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21 16:33:29 -07:00
Joe Perches
0dc7d2b3cb drivers/net/ks*: Use netdev_<level>, netif_<level> and pr_<level>
I'm not sure this is correct.

It changes logging macros from:
	dev_<level>(&ks->spidev->dev,
to
	netdev_<level>(ks->netdev,

Comments?

Use netdev_<level>
Use netif_<level>
Use pr_<level>
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Add missing line to message in ks8851_remove
Change kmalloc/memset(,0) to kzalloc
Remove ks_<level> macros
Consolidation code into set_media_state

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16 21:23:25 -07:00
Eric Dumazet
89d71a66c4 net: Use netdev_alloc_skb_ip_align()
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13 11:48:18 -07:00
Stephen Hemminger
0fc0b732ea netdev: drivers should make ethtool_ops const
No need to put ethtool_ops in data, they should be const.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-02 01:03:33 -07:00
Stephen Hemminger
61357325f3 netdev: convert bulk of drivers to netdev_tx_t
In a couple of cases collapse some extra code like:
   int retval = NETDEV_TX_OK;
   ...
   return retval;
into
   return NETDEV_TX_OK;

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01 01:14:07 -07:00
Richard Ršöjfors
b07878e547 netdev: Added KS8842 driver
This is a driver for the Micrel KS8842 ethernet switch.

The supplied code is for driving the KS8842 through the Timberdale FPGA
on the Russellville board, a development board for Intel Atom CPU
in the automotive area.

Signed-off-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-08 00:20:20 -07:00