Buildid can vary in size. According to the man page of ld, buildid can
be 160 bits (sha1) or 128 bits (md5, uuid). Perf assumes buildid size of
20 bytes (160 bits) regardless. When dealing with md5 buildids, it would
thus read more than needed and that would cause mismatches and samples
without symbols.
This patch fixes this by taking into account the actual buildid size as
encoded int he section header. The leftover bytes are also cleared.
This second version fixes a minor issue with the memset() base position.
Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@gmail.com>
Link: http://lkml.kernel.org/r/4cc1af3c.8ee7d80a.5a28.ffff868e@mx.google.com
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Try and pick the best symbol based on a few heuristics:
- Prefer a non weak symbol over a weak one
- Prefer a global symbol over a non global one
- Prefer a symbol with less underscores (idea taken from kallsyms.c)
- If all else fails, choose the symbol with the longest name
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110824065243.161953371@samba.org
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
kallsyms__parse capitalises the symbol type, so every symbol is marked
global. Remove this and fix symbol_type__is_a to handle both local and
global symbols.
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110824065243.077125989@samba.org
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
kallsyms__parse assumes that /proc/kallsyms is sorted and sets the end
of the previous symbol to the start of the current one.
Unfortunately module symbols are not sorted, eg:
ffffffffa0081f30 t e1000_clean_rx_irq [e1000e]
ffffffffa00817a0 t e1000_alloc_rx_buffers [e1000e]
Some symbols end up with a negative length and others have a length
larger than they should. This results in confusing perf output.
We already have a function to fixup the end of zero length symbols so
use that instead.
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110824065242.969681349@samba.org
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
64bit PowerPC debuginfo files have an empty function descriptor section.
I hit a SEGV when perf tried to use this section for symbol resolution.
To fix this we need to check the section is valid and we can do this by
checking for type SHT_PROGBITS.
Cc: <stable@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Eric B Munson <emunson@mgebm.net>
Link: http://lkml.kernel.org/r/20110824065242.895239970@samba.org
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds two new options to perf annotate:
- --no-asm-raw : Do not display raw instruction encodings
- --no-source : Do not interleave source code with assembly code
We believe those options make the output of annotate more readable.
Systematically displaying source can make it hard to follow code and
especially optimized code.
Raw encodings are not useful in most cases.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20110517153207.GA9834@quad
Signed-off-by: Stephane Eranian <eranian@google.com>
[committer note: Use the 'no-' option inverting logic]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A file in /tmp/ might be a symlink, so lstat() should be used instead of
stat().
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20110811205537.GA22864@albatros
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If we bring the recorded perf data together with kernel binary from another
machine using:
on server A:
perf archive
on server B:
tar xjvf perf.data.tar.bz2 -C ~/.debug
the build_id kernel dso is not properly recognized during the "perf report"
command on server B.
The reason is, that build_id dsos are added during the session initialization,
while the kernel maps are created during the sample event processing.
The machine__create_kernel_maps functions ends up creating new dso object for
kernel, but it does not check if we already have one added by build_id
processing.
Also the build_id reading ABI quirk added in commit:
- commit b25114817a
perf build-id: Add quirk to deal with perf.data file format breakage
populates the "struct build_id_event::pid" with 0, which
is later interpreted as DEFAULT_GUEST_KERNEL_ID.
This is not always correct, so it's better to guess the pid
value based on the "struct build_id_event::header::misc" value.
- Tested with data generated on x86 kernel version v2.6.34
and reported back on x86_64 current kernel.
- Not tested for guest kernel case.
Note the problem stays for PERF_RECORD_MMAP events recorded by perf that
does not use proper pid (HOST_KERNEL_ID/DEFAULT_GUEST_KERNEL_ID). They are
misinterpreted within the current perf code. Probably there's not much we
can do about that.
Cc: Avi Kivity <avi@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Link: http://lkml.kernel.org/r/20110601194346.GB1934@jolsa.brq.redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The external symbol files are generated by JIT compilers, for example, but we
need to make sure they're ours before injecting them to 'perf report'.
Requested-by: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1312919658-17158-1-git-send-email-penberg@kernel.org
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf uses /proc/modules to figure out where kernel modules are loaded.
With the advent of kptr_restrict, non root users get zeroes for all module
start addresses.
So check if kptr_restrict is non zero and don't generate the syntethic
PERF_RECORD_MMAP events for them.
Warn the user about it in perf record and in perf report.
In perf report the reference relocation symbol being zero means that
kptr_restrict was set, thus /proc/kallsyms has only zeroed addresses, so don't
use it to fixup symbol addresses when using a valid kallsyms (in the buildid
cache) or vmlinux (in the vmlinux path) build-id located automatically or
specified by the user.
Provide an explanation about it in 'perf report' if kernel samples were taken,
checking if a suitable vmlinux or kallsyms was found/specified.
Restricted /proc/kallsyms don't go to the buildid cache anymore.
Example:
[acme@emilia ~]$ perf record -F 100000 sleep 1
WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted, check
/proc/sys/kernel/kptr_restrict.
Samples in kernel functions may not be resolved if a suitable vmlinux file is
not found in the buildid cache or in the vmlinux path.
Samples in kernel modules won't be resolved at all.
If some relocation was applied (e.g. kexec) symbols may be misresolved even
with a suitable vmlinux or kallsyms file.
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.005 MB perf.data (~231 samples) ]
[acme@emilia ~]$
[acme@emilia ~]$ perf report --stdio
Kernel address maps (/proc/{kallsyms,modules}) were restricted,
check /proc/sys/kernel/kptr_restrict before running 'perf record'.
If some relocation was applied (e.g. kexec) symbols may be misresolved.
Samples in kernel modules can't be resolved as well.
# Events: 13 cycles
#
# Overhead Command Shared Object Symbol
# ........ ....... ................. .....................
#
20.24% sleep [kernel.kallsyms] [k] page_fault
20.04% sleep [kernel.kallsyms] [k] filemap_fault
19.78% sleep [kernel.kallsyms] [k] __lru_cache_add
19.69% sleep ld-2.12.so [.] memcpy
14.71% sleep [kernel.kallsyms] [k] dput
4.70% sleep [kernel.kallsyms] [k] flush_signal_handlers
0.73% sleep [kernel.kallsyms] [k] perf_event_comm
0.11% sleep [kernel.kallsyms] [k] native_write_msr_safe
#
# (For a higher level overview, try: perf report --sort comm,dso)
#
[acme@emilia ~]$
This is because it found a suitable vmlinux (build-id checked) in
/lib/modules/2.6.39-rc7+/build/vmlinux (use -v in perf report to see the long
file name).
If we remove that file from the vmlinux path:
[root@emilia ~]# mv /lib/modules/2.6.39-rc7+/build/vmlinux \
/lib/modules/2.6.39-rc7+/build/vmlinux.OFF
[acme@emilia ~]$ perf report --stdio
[kernel.kallsyms] with build id 57298cdbe0131f6871667ec0eaab4804dcf6f562
not found, continuing without symbols
Kernel address maps (/proc/{kallsyms,modules}) were restricted, check
/proc/sys/kernel/kptr_restrict before running 'perf record'.
As no suitable kallsyms nor vmlinux was found, kernel samples can't be
resolved.
Samples in kernel modules can't be resolved as well.
# Events: 13 cycles
#
# Overhead Command Shared Object Symbol
# ........ ....... ................. ......
#
80.31% sleep [kernel.kallsyms] [k] 0xffffffff8103425a
19.69% sleep ld-2.12.so [.] memcpy
#
# (For a higher level overview, try: perf report --sort comm,dso)
#
[acme@emilia ~]$
Reported-by: Stephane Eranian <eranian@google.com>
Suggested-by: David Miller <davem@davemloft.net>
Cc: Dave Jones <davej@redhat.com>
Cc: David Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Kees Cook <kees.cook@canonical.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: http://lkml.kernel.org/n/tip-mt512joaxxbhhp1odop04yit@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
One more installment on an area that is mostly dormant.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If symbol_conf.priv_size is not a multiple of "sizeof(u64)" we'll bus
error on sparc64 in symbol__new because the "struct symbol *" pointer
is computed by adding symbol_conf.priv_size to the memory allocated.
We cannot isolate the fix to symbol__new and symbol__delete since the
private area is computed by subtracting the priv_size value from a
"struct symbol" pointer, so then the private area can still be
potentially unaligned.
So, simply align the symbol_conf.priv_size value in symbol__init()
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20110328.175849.112593455.davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf can't currently trace into the vsyscall page. It looks like it was
meant to work.
Tested on 2.6.38 and today's -git.
The bug is easy to reproduce. Compile this:
int main()
{
int i;
struct timespec t;
for(i = 0; i < 10000000; i++)
clock_gettime(CLOCK_MONOTONIC, &t);
return 0;
}
and run it through perf record; perf report. The top entry shows
"[unknown]" and you can't zoom in.
It looks like there are two issues. The first is a that a test for user
mode executing in kernel space is backwards. (That's the first hunk
below). The second (I think) is that something's wrong with the code
that generates lots of little struct dso objects for different sections
-- when it runs on vmlinux it results in bogus long_name values which
cause objdump to fail.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LPU-Reference: <AANLkTikxSw5+wJZUWNz++nL7mgivCh_Zf=2Kq6=f9Ce_@mail.gmail.com>
Signed-off-by: Andy Lutomirski <luto@mit.edu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The original intent of the code was to repeat the search with
want_symtab = 0. But as the code stands now, we never hit the "default"
case of the switch statement. Which means we never repeat the search.
Tested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reported-by: Arun Sharma <asharma@fb.com>
Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Dave Martin <dave.martin@linaro.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And the DSO__ORIG_ enum to SYMTAB__, to clarify that this is about from
where the symtab was obtained.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To support multiple events we need to do these calcs per 'struct hists'
instance, and it turns out we already do that at:
__hists__add_entry
hists__inc_nr_entries
hists__calc_col_len
for all the unfiltered hist_entry instances we stash in the rb tree, so
trow away the dead code.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ec5761e cset introduced the symfs feature with a bug for loading vmlinux
files that ended up causing this failure:
[root@emilia v2.6.38-rc5+]# strace -e trace=open perf top --vmlinux ./vmlinux 2>&1 | tail -3
open("/./vmlinux", O_RDONLY) = -1 ENOENT (No such file or directory)
./vmlinux with build id b9266bf40e98dadb5d43a2f3e95d3c5d4aff46dc not found, continuing without symbols
The ./vmlinux file can't be used
[root@emilia v2.6.38-rc5+]#
Remove the extra slash, just like is done in the DSO__ORIG_DSO handling in
dso__load() and other parts of the ec5761e cset.
Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: David Ahern <daahern@cisco.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
GCC 4.6.0 in Fedora rawhide turned up some compile errors in tools/perf
due to the -Werror=unused-but-set-variable flag.
I've gone through and annotated some of the assignments that had side
effects (ie: return value from a function) with the __used annotation,
and in some cases, just removed unused code.
In a few cases, we were assigning something useful, but not using it in
later parts of the function.
kyle@dreadnought:~/src% gcc --version
gcc (GCC) 4.6.0 20110122 (Red Hat 4.6.0-0.3)
Cc: Ingo Molnar <mingo@redhat.com>
LKML-Reference: <20110124161304.GK27353@bombadil.infradead.org>
Signed-off-by: Kyle McMartin <kyle@redhat.com>
[ committer note: Fixed up the annotation fixes, as that code moved recently ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using %L[uxd] has issues in some architectures, like on ppc64. Fix it
by making our 64 bit integers typedefs of stdint.h types and using
PRI[ux]64 like, for instance, git does.
Reported by Denis Kirjanov that provided a patch for one case, I went
and changed all cases.
Reported-by: Denis Kirjanov <dkirjanov@kernel.org>
Tested-by: Denis Kirjanov <dkirjanov@kernel.org>
LKML-Reference: <20110120093246.GA8031@hera.kernel.org>
Cc: Denis Kirjanov <dkirjanov@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pingtian Han <phan@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In ARM's Thumb mode the bottom bit of the symbol address is set to mark
the function as Thumb; the instructions are in reality 2 or 4 byte on 2
byte alignments, and when the +1 address is used in annotate it causes
objdump to disassemble invalid instructions.
The patch removes that bottom bit during symbol loading.
Many thinks to Dave Martin for comments on an initial version of the
patch.
(For reference this corresponds to this bug
https://bugs.launchpad.net/linux-linaro/+bug/677547 )
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Dave Martin <dave.martin@linaro.org>
LKML-Reference: <20110121163922.GA31398@davesworkthinkpad>
Signed-off-by: Dr. David Alan Gilbert <david.gilbert@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For kallsyms we don't have the symbol address end, so we do an extra pass and
set the symbol end addr as being the start of the next minus one.
But this was being done just after we filtered the symbols of a
particular type (functions, variables), so the symbol end was sometimes
after what it really is.
Fixing up symbol end also was falling apart when we have symbol aliases,
then the end address of all but the last alias was being set to be
before its start.
Fix it up by checking for symbol aliases and making the kallsyms__parse
routine use the next symbol, whatever its type, as the limit for the
previous symbol, passing that end address to the callback.
This was detected by the 'perf test' synthetic paranoid regression
tests, fix it up so that even that case doesn't mislead us.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The symfs argument allows analysis of perf.data file using a locally accessible
filesystem tree with debug symbols - e.g., tree created during image builds,
sshfs mount, loop mounted KVM disk images, USB keys, initrds, etc. Anything
with an OS tree can be analyzed from anywhere without the need to populate a
local data store with build-ids.
Commiter notes:
o Fixed up symfs="/" variants handling.
o prefixed DSO__ORIG_GUEST_KMODULE case with symfs too, avoiding use of files
outside the symfs directory.
LKML-Reference: <1291926427-28846-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Users were not being able to have the explicitely specified vmlinux
pathname used, instead a search on the vmlinux path was always being
made.
Reported-by: Francis Moreau <francis.moro@gmail.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Francis Moreau <francis.moro@gmail.com>
Cc: Franck Bui-Huu <vagabon.xyz@gmail.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
LPU-Reference: <m3hbelydz8.fsf_-_@gmail.com>
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is useful for analyzing a perf data file on a different system than
the one data was collected on and still include symbols from loaded
kernel modules in the output.
Commiter note: Updated the man page accordingly.
LKML-Reference: <1291775986-16475-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On ARM, module symbol start address is ahead of kernel symbol start address, so
we can't suppose that the start address of kernel map always is zero, otherwise
may cause incorrect .start and .end of kernel map (caused by fixup) when there
are modules loaded, then map_groups__find may return incorrect map for symbol
query.
This patch always figures out the start address of kernel map from
/proc/kallsyms if the file is available, so fix the issues on ARM for module
loaded case.
This patch fixes the following issues on ARM when modules are loaded:
- vmlinux symbol can't be found by kallsyms maps doing 'perf test'
- module symbols are parsed mistakenlly when doing 'perf top'/'perf report'
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20101125192725.62d31b42@tom-lei>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On ARM, module addresss space is ahead of kernel space, so the module
symbols are handled before kernel symbol in dso__split_kallsyms, then
was causing one map to be created for each kernel symbol.
Reported-by: Ming Lei <tom.leiming@gmail.com>
Tested-by: Ming Lei <tom.leiming@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Ming Lei <tom.leiming@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20101124144540.GB15875@ghostprotocols.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If a 32bit userspace perf is running on a 64bit kernel, the end of the final
map in the kernel would incorrectly be set to 2^32-1 rather than 2^64-1.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1290658375-10342-1-git-send-email-imunsie@au1.ibm.com>
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At least on ARM, padding is inserted between rb_node and sym in struct
symbol_name_rb_node, causing "((void *)sym) - sizeof(struct rb_node)" to
point inside rb_node rather than to the symbol_name_rb_node. Fix this
by converting the code to use container_of().
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ming Lei <tom.leiming@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20101123163106.GA25677@debian>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By returning immediately if it was already initialized, do it as well at
symbol__exit, refusing multiple deinitializations.
This fixes problems in the kmem, sched and timechart commands.
Reported-by: Davidlohr Bueso <dave@gnu.org>
Cc: Davidlohr Bueso <dave@gnu.org>
Signed-off-by: Jovi Zhang <bookjovi@gmail.com>
LKML-Reference: AANLkTi=9Cn=R8SPMCRp5z+gEjXbaBHeb-AaOtRbuwwcn@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Given a dso, list the symbols in ascending name order. Needed for
listing available symbols from perf probe.
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Mark Wielaard <mjw@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Naren A Devaiah <naren.devaiah@in.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100825134329.5447.92261.sendpatchset@localhost6.localdomain6>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ARM ELF files use symbols with special names $a, $t, $d to identify regions of
ARM code, Thumb code and data within code sections. This can cause confusing
output from the perf tools, especially for partially stripped binaries, or
binaries containing user-added zero-sized symbols (which may occur in
hand-written assembler which hasn't been fully annotated with .size
directives).
This patch filters out these symbols at load time.
LKML-Reference: <1281352878-8735-2-git-send-email-dave.martin@linaro.org>
Signed-off-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that tools that wan't to act only on a subset of (weak, global,
local) symbols can do so, such as the upcoming uprobes support in 'perf
probe'.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Which is at perf_session__destroy_kernel_maps, counterpart to the
perf_session__create_kernel_maps where the kmap structure is located, just
after the vmlinux_maps.
Make it also check if the kernel maps were actually created, which may not
be the case if, for instance, perf_session__new can't complete due to
permission problems in, for instance, a 'perf report' case, when a
segfault will take place, that is how this was noticed.
The problem was introduced in d65a458, thus post .35.
This also adds code to release guest machines as them are also created
in perf_session__create_kernel_maps, so should be deleted on this newly
introduced counterpart, perf_session__destroy_kernel_maps.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we reduce the noise when looking for leaks using tools such as
valgrind.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changes:
* Simplification of the main search loop on dso__load()
* Replace the search with a 2-pass search:
* First, try to find an image with a proper symtab.
* Second, repeat the search, accepting dynsym.
A second scan should only ever happen when needed debug images are
missing from the buildid cache or stale, i.e., when the cache is out of
sync.
Currently, the second scan also happens when using separated debug
images, since the caching logic doesn't currently know how to cache
those. Improvements to the cache behaviour ought to solve that.
Signed-off-by: Dave Martin <dave.martin@linaro.org>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If we have a buildid, then we never want to load an image which has no buildid,
or which has a different buildid, so it makes sense for the check to be built
into dso__load and not done separately. This is fine for old distros which
don't use buildid at all since we do no check in that case.
This refactoring also alleviates some subtle race condition issues by not
opening ELF images twice to check the buildid and then load the symbols, which
could lead to weirdness if an image is replaced under our feet.
Signed-off-by: Dave Martin <dave.martin@linaro.org>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
They were globals, and since we support multiple hists and sessions
at the same time, it doesn't make sense to calculate those values
considereing all symbols in all sessions.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When I ran "perf kvm ... top", I encountered the following error output.
Error: perfcounter syscall returned with -1 (Too many open files)
Fatal: No CONFIG_PERF_EVENTS=y kernel support configured?
Looking into perf, I found perf opens too many directories at
initialization time, but forgets to close them. Here is the fix.
LKML-Reference: <4C230362.5080704@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently symbol resolution does not work for 64-bit programs on architectures
that use function descriptors such as ppc64.
The problem is that a symbol doesn't point to a text address, it points to a
data area that contains (amongst other things) a pointer to the text address.
We look for a section called ".opd" which is the function descriptor area. To
create the full symbol table, when we see a symbol in the function descriptor
section we load the first pointer and use that as the text address.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1276523793-15422-1-git-send-email-ebmunson@us.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Eric B Munson <ebmunson@us.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to set the long name to the name specified via, for instance,
'perf annotate --vmlinux /path/to/vmlinux', if not it will remain as
'[kernel.kallsyms]' and that will make annotate fail when passing this
as the vmlinux name in the call to objdump.
The way this is setup grew unwieldly and dso__load_vmlinux is the
function that should allocate space for the long name, with callers not
assuming that filenames should be allocated somehow by then (strdup,
dso__build_id_filename, etc).
For now this is the minimalistic patch, a proper fix for .36 will be
made.
Reported-by: Stephane Eranian <eranian@google.com>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20100604003900.GD10469@ghostprotocols.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that if the kernel DSO has a build id because record inserted it in
the perf.data build id table in the header, or a BUILD_ID event was
inserted in the stream, we first look at the build id cache
($HOME/.debug/).
If we find it there, try to use it, allowing offline annotation in
addition to 'perf report'.
Reported-by: Stephane Eranian <eranian@google.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were still using the pathname found on the MMAP event, that could not
be the one we used when recording, so use the build-id cache for that,
only falling back to use the pathname in the MMAP event if no build-ids
are available.
With this we now also are able to do secure, seamless offline annotation.
Example:
[root@doppio linux-2.6-tip]# perf report -g none -v 2> /dev/null | head -10
8.12% Xorg /usr/lib64/libpixman-1.so.0.14.0 0x0000000000026d02 B [.] pixman_rasterize_edges
4.68% firefox /usr/lib64/xulrunner-1.9.1/libxul.so 0x00000000005dbdba B [.] 0x000000005dbdba
3.70% swapper /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff81022cea ! [k] read_hpet
2.96% init /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff81022cea ! [k] read_hpet
2.73% swapper /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff8100a738 ! [k] mwait_idle_with_hints
[root@doppio linux-2.6-tip]# perf annotate -v pixman_rasterize_edges 2>&1 | grep Executing
Executing: objdump --start-address=0x000000371ce26670 --stop-address=0x000000371ce2709f -dS /root/.debug/.build-id/bd/6ac5199137aaeb279f864717d8d061477466c1|grep -v /root/.debug/.build-id/bd/6ac5199137aaeb279f864717d8d061477466c1|expand
[root@doppio linux-2.6-tip]# perf buildid-list | grep libpixman-1.so.0.14.0
bd6ac5199137aaeb279f864717d8d061477466c1 /usr/lib64/libpixman-1.so.0.14.0
[root@doppio linux-2.6-tip]#
Reported-by: Stephane Eranian <eranian@google.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
