This patch fixes few minor things I've spotted while going through
code:
1. Better document return codes
2. If 'ubifs_scan_a_node()' returns some thing we do not expect,
treat this as an error.
3. Try to do recovery only when 'ubifs_scan()' returns %-EUCLEAN,
not on any error.
4. If empty space starts at a non-aligned address, print a message.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Reviewed-by: Adrian Hunter <Adrian.Hunter@nokia.com>
In case of corruptions, dump 8192 bytes instead of 4096. The
largest node is 4096+ bytes, so it is better to see a node
boundary, which is not always possible when only 4096 bytes
are printed.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Reviewed-by: Adrian Hunter <Adrian.Hunter@nokia.com>
UBIFS uses a bdi device per volume, but does not care to hand out unique
names to each of them. This causes an error when trying to mount more
than one volumes. Append the UBI volume and device ID to avoid that.
[Amended a bit by Artem Bityutskiy]
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Cc: Adrian Hunter <ext-adrian.hunter@nokia.com>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
When debugging is enabled and an unclean file-system is mounter,
the following assertion is triggered:
UBIFS assert failed in ubifs_tnc_start_commit at 805 (pid 1081)
Call Trace:
[cfaffbd0] [c0006cf8] show_stack+0x44/0x16c (unreliable)
[cfaffc10] [c011b738] ubifs_tnc_start_commit+0xbb8/0xd18
[cfaffc90] [c0112670] do_commit+0x150/0xa44
[cfaffd10] [c0125234] ubifs_rcvry_gc_commit+0xd8/0x544
[cfaffd60] [c0100e9c] ubifs_fill_super+0xe78/0x15f8
[cfaffdf0] [c0102118] ubifs_get_sb+0x20c/0x320
[cfaffe70] [c007f764] vfs_kern_mount+0x58/0xe0
[cfaffe90] [c007f83c] do_kern_mount+0x40/0xf8
[cfaffeb0] [c0095c24] do_mount+0x550/0x758
[cfafff10] [c0095ebc] sys_mount+0x90/0xe0
[cfafff40] [c000ed4c] ret_from_syscall+0x0/0x3c
The reason is that we initialize 'c->min_leb_idx' early, and do
not re-calculate it after journal replay.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
This patch adds the following minor optimization:
1. If write-buffer does not use the timer, indicate it with the
wbuf->no_timer variable, instead of using the wbuf->softlimit
variable. This is better because wbuf->softlimit is of ktime_t
type, and the ktime_to_ns function contains 64-bit multiplication.
2. Do not call the 'hrtimer_cancel()' function for write-buffers
which do not use timers.
3. Do not cancel the timer in 'ubifs_put_super()' because the
synchronization function does this.
This patch also removes a confusing comment.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
1. Make the I/O debugging message print the journal head number.
2. Add prints to timer functions.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Fix the following warning:
fs/ubifs/io.c: In function 'ubifs_wbuf_init':
fs/ubifs/io.c:860: warning: integer overflow in expression
And limit maximum hrtimer delta to ULONG_MAX because the
argument is 'unsigned long'.
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
helpers: get_cached_acl(inode, type), set_cached_acl(inode, type, acl),
forget_cached_acl(inode, type).
ubifs/xattr.c needed includes reordered, the rest is a plain switchover.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* 'linux-next' of git://git.infradead.org/ubifs-2.6:
UBIFS: start using hrtimers
hrtimer: export ktime_add_safe
UBIFS: do not forget to register BDI device
UBIFS: allow sync option in rootflags
UBIFS: remove dead code
UBIFS: use anonymous device
UBIFS: return proper error code if the compr is not present
UBIFS: return error if link and unlink race
UBIFS: reset no_space flag after inode deletion
Move BKL into ->put_super from the only caller. A couple of
filesystems had trivial enough ->put_super (only kfree and NULLing of
s_fs_info + stuff in there) to not get any locking: coda, cramfs, efs,
hugetlbfs, omfs, qnx4, shmem, all others got the full treatment. Most
of them probably don't need it, but I'd rather sort that out individually.
Preferably after all the other BKL pushdowns in that area.
[AV: original used to move lock_super() down as well; these changes are
removed since we don't do lock_super() at all in generic_shutdown_super()
now]
[AV: fuse, btrfs and xfs are known to need no damn BKL, exempt]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Make sure a superblock really is writeable by checking MS_RDONLY
under s_umount. sync_filesystems needed some re-arragement for
that, but all but one sync_filesystem caller had the correct locking
already so that we could add that check there. cachefiles grew
s_umount locking.
I've also added a WARN_ON to sync_filesystem to assert this for
future callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
UBIFS uses timers for write-buffer write-back. It is not
crucial for us to write-back exactly on time. We are fine
to write-back a little earlier or later. And this means
we may optimize UBIFS timer so that it could be groped
with a close timer event, so that the CPU would not be
waken up just to do the write back. This is optimization
to lessen power consumption, which is important in
embedded devices UBIFS is used for.
hrtimers have a nice feature: they are effectively range
timers, and we may defind the soft and hard limits for
it. Standard timers do not have these feature. They may
only be made deferrable, but this means there is effectively
no hard limit. So, we will better use hrtimers.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
UBIFS assumes that @c->min_io_size is 8 in case of NOR flash. This
is because UBIFS alignes all nodes to 8-byte boundary, and maintaining
@c->min_io_size introduced unnecessary complications.
This patch removes senseless constructs like:
if (c->min_io_size == 1)
NOR-specific code
Also, few commentaries amendments.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
UBIFS has erroneuosly set 'sb->s_dev' to the UBI volume
character device major/minor. This may lead to clashes
if there is another FS mounted to a block device with
the same major/minor numbers. User-space programs which
use 'stat->st_dev' may get confused because of this.
This problem was found by Al Viro. He also pointed the
way to fix the problem - use 'set_anon_super()' and
'kill_anon_super()' VFS helpers.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
If the compressor is not present, mount_ubifs need
to return an error code. This way ubifs_fill_super
will stop and handle the error.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Consider a scenario when 'vfs_link(dirA/fileA)' and
'vfs_unlink(dirA/fileA, dirB/fileB)' race. 'vfs_link()' does not
lock 'dirA->i_mutex', so this is possible. Both of the functions
lock 'fileA->i_mutex' though. Suppose 'vfs_unlink()' wins, and takes
'fileA->i_mutex' mutex first. Suppose 'fileA->i_nlink' is 1. In this
case 'ubifs_unlink()' will drop the last reference, and put 'inodeA'
to the list of orphans. After this, 'vfs_link()' will link
'dirB/fileB' to 'inodeA'. Thir is a problem because, for example,
the subsequent 'vfs_unlink(dirB/fileB)' will add the same inode
to the list of orphans.
This problem was reported by J. R. Okajima <hooanon05@yahoo.co.jp>
[Artem: add more comments, amended commit message]
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
When UBIFS runs out of space it spends a lot of time trying to
find more space before returning ENOSPC. As there is no point
repeating that unless something has changed, UBIFS has an
optimization to record that the file system is 100% full and not
try to find space. That flag was not being reset when a pending
deletion was finally done.
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Reviewed-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits)
trivial: Update my email address
trivial: NULL noise: drivers/mtd/tests/mtd_*test.c
trivial: NULL noise: drivers/media/dvb/frontends/drx397xD_fw.h
trivial: Fix misspelling of "Celsius".
trivial: remove unused variable 'path' in alloc_file()
trivial: fix a pdlfush -> pdflush typo in comment
trivial: jbd header comment typo fix for JBD_PARANOID_IOFAIL
trivial: wusb: Storage class should be before const qualifier
trivial: drivers/char/bsr.c: Storage class should be before const qualifier
trivial: h8300: Storage class should be before const qualifier
trivial: fix where cgroup documentation is not correctly referred to
trivial: Give the right path in Documentation example
trivial: MTD: remove EOL from MODULE_DESCRIPTION
trivial: Fix typo in bio_split()'s documentation
trivial: PWM: fix of #endif comment
trivial: fix typos/grammar errors in Kconfig texts
trivial: Fix misspelling of firmware
trivial: cgroups: documentation typo and spelling corrections
trivial: Update contact info for Jochen Hein
trivial: fix typo "resgister" -> "register"
...
Change the page_mkwrite prototype to take a struct vm_fault, and return
VM_FAULT_xxx flags. There should be no functional change.
This makes it possible to return much more detailed error information to
the VM (and also can provide more information eg. virtual_address to the
driver, which might be important in some special cases).
This is required for a subsequent fix. And will also make it easier to
merge page_mkwrite() with fault() in future.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Cc: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
UBIFS did not recovery in a situation in which it could
have. The relevant function assumed there could not be
more nodes in an eraseblock after a corrupted node, but
in fact the last (NAND) page written might contain anything.
The correct approach is to check for empty space (0xFF bytes)
from then on.
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
simple_set_mnt() is defined as returning 'int' but always returns 0.
Callers assume simple_set_mnt() never fails and don't properly cleanup if
it were to _ever_ fail. For instance, get_sb_single() and get_sb_nodev()
should:
up_write(sb->s_unmount);
deactivate_super(sb);
if simple_set_mnt() fails.
Since simple_set_mnt() never fails, would be cleaner if it did not
return anything.
[akpm@linux-foundation.org: fix build]
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now UBIFS is supported by u-boot. If we ever decide to change the
media format, then people will have to upgrade their u-boots to
mount new format images. However, very often it is possible to
preserve R/O forward-compatibility, even though the write
forward-compatibility is not preserved.
This patch introduces a new super-block field which stores the
R/O compatibility version.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Acked-by: Adrian Hunter <Adrian.Hunter@nokia.com>
fs/ubifs/super.c: In function ‘ubifs_show_options’:
fs/ubifs/super.c:425: warning: format not a string literal and no format arguments
fs/ubifs/super.c: In function ‘mount_ubifs’:
fs/ubifs/super.c:1204: warning: format not a string literal and no format arguments
fs/ubifs/super.c: In function ‘ubifs_remount_rw’:
fs/ubifs/super.c:1557: warning: format not a string literal and no format arguments
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
The 'joinup()' function cannot deal with situations when nodes
go in reverse order - it just leaves them in this order. This
patch implement full nodes sorting using n*log(n) algorithm.
It sorts data nodes for bulk-read, and direntry nodes for
readdir().
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
This patch introduces a helpful @c->idx_leb_size variable.
The patch also fixes some spelling issues and makes comments
use "LEB" instead of "eraseblock", which is more correct.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Empty journal head LEBs are accounted as taken empty as well, so
the GC LEB does not have to be the only taken empty LEB when
nounting/remounting.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
UBIFS fast path in write_begin may mark a page up to date
and then discover that there may not be enough space to do
the write, and so fall back to a slow path. The slow path
tries harder, but may still find no space - leaving the page
marked up to date, when it is not. This patch ensures that
the page is marked not up to date in that case.
The bug that this patch fixes becomes evident when the write
is into a hole (sparse file) or is at the end of the file
and a subsequent read is off the end of the file. In both
cases, the file system should return zeros but was instead
returning the page that had not been written because the
file system was out of space.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Make 'ubifs_find_free_space()' return offset where free space starts,
rather than the amount of free space. This is just more appropriat
for its caller.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Trivial cleanup, list_del(); list_add{,_tail}() is equivalent
to list_move{,_tail}(). Semantic patch for coccinelle can be
found at www.cccmz.de/~snakebyte/list_move_tail.spatch
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
The debugging function dbg_chk_lpt_sz() was not working
correctly for small min_io_unit size e.g. NOR flash.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
This UBIFS feature has never worked properly, and it was a mistake
to add it because we simply have no use-cases. So, lets still accept
the fast_unmount mount option, but ignore it. This does not change
much, because UBIFS commit in sync_fs anyway, and sync_fs is called
while unmounting.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
When mounting/re-mounting, UBIFS returns EINVAL even if the ENOSPC
or EROFS codes are are much better, just because we have not found
references to ENOSPC/EROFS in mount (2) man pages. This patch
changes this behaviour and makes UBIFS return real error code,
because:
1. It is just less confusing and more logical
2. mount is not described in SuSv3, so it seems to be not really
well-standartized
3. we do not cover all cases, and any random undocumented in man
pages error code may be returned anyway
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
- preserve the idx_gc list - it will be needed in the same
state, should UBIFS be remounted rw again
- prevent remounting ro if we have switched to read only
mode (due to a fatal error)
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
All writes go through wbufs so they must be sync'd
after syncing inodes and pages.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
The function to traverse and dirty the LPT was still not
dirtying all nodes, with the result that the LPT could
run out of space.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
When data CRC checking is disabled, UBIFS returns incorrect return
code from the 'try_read_node()' function (0 instead of 1, which means
CRC error), which make the caller re-read the data node again, but using
a different code patch, so the second read is fine. Thus, we read the
same node twice. And the result of this is that UBIFS is slower
with no_chk_data_crc option than it is with chk_data_crc option.
This patches fixes the problem.
Reported-by: Reuben Dowle <Reuben.Dowle@navico.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
I introduce wrong assertions in one of the previous commits, this
patch fixes them.
Also, initialize debugfs after the debugging check. This is a little
nicer because we want the FS data to be accessible to external users
after everything has been initialized.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
When mounting read-only the orphan area head is
not initialized. It must be initialized when
remounting read/write, but it was not. This patch
fixes that.
[Artem: sorry, added comment tweaking noise]
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
When we mount UBIFS, GC LEB may contain out-of-date information,
and UBIFS should update lprops and set free space for thei LEB.
Currently UBIFS does this only if mounted R/W. But for R/O mount
we have to do the same, because otherwise we will have incorrect
FS free space reported to user-space.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
We observe space corrupted accounting when re-mounting. So add some
debbugging checks to catch problems like this.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
When freeing the c->idx_lebs list, we have to release the LEBs as well,
because we might be called from mount to read-only mode code. Otherwise
the LEBs stay taken forever, which may cause problems when we re-mount
back ro RW mode.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
This patch simplifies lock_[23]_inodes functions. We do not have
to care about locking order, because UBIFS does this for @i_mutex
and this is enough. Thanks to Al Viro for suggesting this.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
UBIFS wrongly tells UBI that all data is short term. Use proper
hints instead. Thanks to Xiaochuan-Xu for noticing this.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
VFS calls '->sync_fs()' twice - first time with @wait = 0, second
time with @wait = 1. As a result, we may commit and synchronize
write-buffers twice. Avoid doing this by returning immediatelly if
@wait = 0.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits)
trivial: chack -> check typo fix in main Makefile
trivial: Add a space (and a comma) to a printk in 8250 driver
trivial: Fix misspelling of "firmware" in docs for ncr53c8xx/sym53c8xx
trivial: Fix misspelling of "firmware" in powerpc Makefile
trivial: Fix misspelling of "firmware" in usb.c
trivial: Fix misspelling of "firmware" in qla1280.c
trivial: Fix misspelling of "firmware" in a100u2w.c
trivial: Fix misspelling of "firmware" in megaraid.c
trivial: Fix misspelling of "firmware" in ql4_mbx.c
trivial: Fix misspelling of "firmware" in acpi_memhotplug.c
trivial: Fix misspelling of "firmware" in ipw2100.c
trivial: Fix misspelling of "firmware" in atmel.c
trivial: Fix misspelled firmware in Kconfig
trivial: fix an -> a typos in documentation and comments
trivial: fix then -> than typos in comments and documentation
trivial: update Jesper Juhl CREDITS entry with new email
trivial: fix singal -> signal typo
trivial: Fix incorrect use of "loose" in event.c
trivial: printk: fix indentation of new_text_line declaration
trivial: rtc-stk17ta8: fix sparse warning
...
WB_SYNC_HOLD is going to be zapped so we should not use it. Use
%WB_SYNC_NONE instead. Here is what akpm said:
"I think I'll just switch that to WB_SYNC_NONE. The `wait==0' mode is
just an advisory thing to help the fs shove lots of data into the
queues. If some gets missed then it'll be picked up on the second
->sync_fs call, with wait==1."
Thanks to Randy Dunlap for catching this.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the write_begin/write_end aops, page_symlink was broken because it
could no longer pass a GFP_NOFS type mask into the point where the
allocations happened. They are done in write_begin, which would always
assume that the filesystem can be entered from reclaim. This bug could
cause filesystem deadlocks.
The funny thing with having a gfp_t mask there is that it doesn't really
allow the caller to arbitrarily tinker with the context in which it can be
called. It couldn't ever be GFP_ATOMIC, for example, because it needs to
take the page lock. The only thing any callers care about is __GFP_FS
anyway, so turn that into a single flag.
Add a new flag for write_begin, AOP_FLAG_NOFS. Filesystems can now act on
this flag in their write_begin function. Change __grab_cache_page to
accept a nofs argument as well, to honour that flag (while we're there,
change the name to grab_cache_page_write_begin which is more instructive
and does away with random leading underscores).
This is really a more flexible way to go in the end anyway -- if a
filesystem happens to want any extra allocations aside from the pagecache
ones in ints write_begin function, it may now use GFP_KERNEL (rather than
GFP_NOFS) for common case allocations (eg. ocfs2_alloc_write_ctxt, for a
random example).
[kosaki.motohiro@jp.fujitsu.com: fix ubifs]
[kosaki.motohiro@jp.fujitsu.com: fix fuse]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <stable@kernel.org> [2.6.28.x]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Cleaned up the calling convention: just pass in the AOP flags
untouched to the grab_cache_page_write_begin() function. That
just simplifies everybody, and may even allow future expansion of the
logic. - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'linux-next' of git://git.infradead.org/ubifs-2.6: (33 commits)
UBIFS: add more useful debugging prints
UBIFS: print debugging messages properly
UBIFS: fix numerous spelling mistakes
UBIFS: allow mounting when short of space
UBIFS: fix writing uncompressed files
UBIFS: fix checkpatch.pl warnings
UBIFS: fix sparse warnings
UBIFS: simplify make_free_space
UBIFS: do not lie about used blocks
UBIFS: restore budg_uncommitted_idx
UBIFS: always commit on unmount
UBIFS: use ubi_sync
UBIFS: always commit in sync_fs
UBIFS: fix file-system synchronization
UBIFS: fix constants initialization
UBIFS: avoid unnecessary calculations
UBIFS: re-calculate min_idx_size after the commit
UBIFS: use nicer 64-bit math
UBIFS: fix available blocks count
UBIFS: various comment improvements and fixes
...
We cannot use ubifs_err() macro with DBGKEY() and DBGKEY1(),
because this is racy and holding dbg_lock is needed. Use
dbg_err() instead, which does have the lock held.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
It is fine if there is not free space - we should still allow mounting
this FS. This patch relaxes the free space requirements and adds info
dumps.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
UBIFS does not disable compression if ui->flags is non-zero, e.g.
if the file has "sync" flag. This is because of the typo which
is fixed by this patch. The patch also adds a couple of useful
debugging prints.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
These are mostly long lines and wrong indentation warning
fixes. But also there are two volatile variables and
checkpatch.pl complains about them:
WARNING: Use of volatile is usually wrong: see Documentation/volatile-considered-harmful.txt
+ volatile int gc_seq;
WARNING: Use of volatile is usually wrong: see Documentation/volatile-considered-harmful.txt
+ volatile int gced_lnum;
Well, we anyway use smp_wmb() for c->gc_seq and c->gced_lnum, so
these 'volatile' modifiers can be just dropped.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
fs/ubifs/compress.c:111:8: warning: incorrect type in argument 5 (different signedness)
fs/ubifs/compress.c:111:8: expected unsigned int *dlen
fs/ubifs/compress.c:111:8: got int *out_len
fs/ubifs/compress.c:175:10: warning: incorrect type in argument 5 (different signedness)
fs/ubifs/compress.c:175:10: expected unsigned int *dlen
fs/ubifs/compress.c:175:10: got int *out_len
Fix this by adding a cast to (unsigned int *). We guarantee that
our lengths are small and no overflow is possible.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
The 'make_free_space()' function was too complex and this patch
simplifies it. It also fixes a bug - the freespace test failed
straight away on UBI volumes with 512 bytes LEB size.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Do not force UBIFS return 0 used space when it is empty. It leads
to a situation when creating any file immediately produces tens of
used blocks, which looks very weird. It is better to be honest and
say that some blocks are used even if the FS is empty. And ext2
does the same.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
UBIFS stores uncommitted index size in c->budg_uncommitted_idx,
and this affect budgeting calculations. When mounting and
replaying, this variable is not updated, so we may end up
with "over-budgeting". This patch fixes the issue.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
UBIFS commits on unmount to make the next mount faster. Currently,
it commits only if there is more than LEB size bytes in the
journal. This is not very good, because journal size may be
large (512KiB). And there may be few deletions in the journal
which do not take much journal space, but which do introduce
a lot of TNC changes and make mount slow.
Thus, jurt remove this condition and always commit.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Always run commit in sync_fs, because even if the journal seems
to be almost empty, there may be a deletion which removes a large
file, which affects the index greatly. And because we want
better free space predictions after 'sync_fs()', we have to
commit.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Argh. The ->sync_fs call is called _before_ all inodes are flushed.
This means we first sync write buffers and commit, then all
inodes are synced, and we end up with unflushed write buffers!
Fix this by forcing synching all indoes from 'ubifs_sync_fs()'.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
The c->min_idx_lebs constant depends on c->old_idx_sz, which
is read from the master node. This means that we have to
initialize c->min_idx_lebs only after we have read the master
node.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
When we commit, but before we try to write anything to the flash
media, @c->min_idx_size is inaccurate, because we do not re-calculate
it after the commit. Do not forget to do this.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Take into account that 2 eraseblocks are never available because
they are reserved for the index. This gives more realistic count
of FS blocks.
To avoid future confusions like this, introduce a constant.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
This patch fixes the following section mismatch:
WARNING: fs/ubifs/ubifs.o(.init.text+0xec): Section mismatch in reference from the function init_module() to the function .exit.text:ubifs_compressors_exit()
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Conflicts:
fs/nfsd/nfs4recover.c
Manually fixed above to use new creds API functions, e.g.
nfs4_save_creds().
Signed-off-by: James Morris <jmorris@namei.org>
Do not forget to check whether lpt debugging is enabled before
running the check functions. This commit also makes some spelling
fixes.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
We need to have a possibility to see various UBIFS variables
and ask UBIFS to dump various information. Debugfs is what
we need.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Introduce a new data structure which contains all debugging
stuff inside. This is cleaner than having debugging stuff
directly in 'c'.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
I have a habit of compiling kernel with
EXTRA_CFLAGS="-Wextra -Wno-unused -Wno-sign-compare -Wno-missing-field-initializers"
and so fs/ubifs/key.h give lots (~10) of these every time:
CC fs/ubifs/tnc_misc.o
In file included from fs/ubifs/ubifs.h:1725,
from fs/ubifs/tnc_misc.c:30:
fs/ubifs/key.h: In function 'key_r5_hash':
fs/ubifs/key.h:64: warning: comparison of unsigned expression >= 0 is always true
fs/ubifs/key.h: In function 'key_test_hash':
fs/ubifs/key.h:81: warning: comparison of unsigned expression >= 0 is always true
This patch fixes the warnings.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
It is very handy to be able to change default UBIFS compressor
via mount options. Introduce -o compr=<name> mount option support.
Currently only "none", "lzo" and "zlib" compressors are supported.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Save a 4 bytes of RAM per 'struct inode' by stroring inode
compression type in bit-filed, instead of using 'int'.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>