Commit graph

808 commits

Author SHA1 Message Date
Linus Torvalds
7f3bf7cd34 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  dmaengine: use DEFINE_IDR for static initialization
  ioat: fix xor_idx_to_desc
  Avoid section type conflict in dma/ioat/dma_v3.c
  ioat: Adding PCI IDs for IOAT devices on SandyBridge platforms
2011-08-04 16:43:43 -10:00
Axel Lin
21ef4b8b7a dmaengine: use DEFINE_IDR for static initialization
We could use DEFINE_IDR for statically allocated idr
that allow us to save a few lines of code.

And also remove unneeded mutex_init() for dma_list_mutex, as
dma_list_mutex is initialized automatically by DEFINE_MUTEX().

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-08-03 22:25:39 -07:00
Dan Williams
d0b0c8c79b ioat: fix xor_idx_to_desc
For versions of the device that implement operation-types 0x87, 0x88
(IOAT_OP_XOR, IOAT_OP_XOR_VAL) this map determines whether a given
source is located in the base or extended descriptor.  Source addresses
6 through 8 require an extended descriptor, hence 0xe0, not 0xd0.  No
shipping hardware currently implements these operation types.

Reported-by: Evgueni Smogailov <evgueni.smogailov@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-08-03 22:25:06 -07:00
Linus Torvalds
12ff47e7f5 Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma
* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (37 commits)
  Improve slave/cyclic DMA engine documentation
  dmaengine: pl08x: handle the rest of enums in pl08x_width
  DMA: PL08x: cleanup selection of burst size
  DMA: PL08x: avoid recalculating cctl at each prepare
  DMA: PL08x: cleanup selection of buswidth
  DMA: PL08x: constify plchan->cd and plat->slave_channels
  DMA: PL08x: separately store source/destination cctl
  DMA: PL08x: separately store source/destination slave address
  DMA: PL08x: clean up LLI debugging
  DMA: PL08x: select LLI bus only once per LLI setup
  DMA: PL08x: remove unused constants
  ARM: mxs-dma: reset after disable channel
  dma: intel_mid_dma: remove redundant pci_set_drvdata calls
  dma: mxs-dma: fix unterminated platform_device_id table
  dmaengine: pl330: make platform data optional
  dmaengine: imx-sdma: return proper error if kzalloc fails
  pch_dma: Fix CTL register access issue
  dmaengine: mxs-dma: skip request_irq for NO_IRQ
  dmaengine/coh901318: fix slave submission semantics
  dmaengine/ste_dma40: allow memory buswidth/burst to be configured
  ...

Fix trivial whitespace conflict in drivers/dma/mv_xor.c
2011-08-01 13:46:37 -10:00
Linus Torvalds
e10b87d2b5 Merge branch 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x
* 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x: (39 commits)
  SH: static should be at beginning of declaration
  sh: move CLKDEV_xxx_ID macro to sh_clk.h
  sh: clock-shx3: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7786: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7785: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7757: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7366: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7343: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7722: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7724: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7366: modify I2C clock settings
  sh: clock-sh7343: modify I2C clock settings
  sh: clock-sh7723: modify I2C clock settings
  sh: clock-sh7722: modify I2C clock settings
  sh: clock-sh7724: modify I2C clock settings
  serial: sh-sci: Fix up pretty name printing for port IRQs.
  serial: sh-sci: Kill off per-port enable/disable callbacks.
  serial: sh-sci: Add missing module description/author bits.
  serial: sh-sci: Regtype probing doesn't need to be fatal.
  sh: Tidy up pre-clkdev clk_get() error handling.
  ...
2011-08-01 06:10:16 -10:00
Vinod Koul
1ae105aa74 Merge branch 'next' into for-linus-3.0 2011-07-27 20:43:21 +05:30
Shawn Guo
580975d7f4 dmaengine: imx-sdma: add device tree probe support
It adds device tree probe support for imx-sdma driver.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>
2011-07-27 09:31:56 +08:00
Shawn Guo
40ad5b3791 dmaengine: imx-sdma: sdma_get_firmware does not need to copy fw_name
It does not need to allocate space and copy fw_name in function
sdma_get_firmware().

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>
2011-07-27 09:31:51 +08:00
Shawn Guo
62550cd7c0 dmaengine: imx-sdma: use platform_device_id to identify sdma version
It might be not good to use software defined version to identify sdma
device type, when hardware does not define such version.  Instead,
soc name is stable enough to define the device type.

The patch uses platform_device_id rather than version number passed
by platform data to identify sdma device type/version.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Vinod Koul <vinod.koul@intel.com>
2011-07-27 09:31:45 +08:00
Linus Torvalds
69f1d1a6ac Merge branch 'next/devel' of ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc
* 'next/devel' of ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (128 commits)
  ARM: S5P64X0: External Interrupt Support
  ARM: EXYNOS4: Enable MFC on Samsung NURI
  ARM: EXYNOS4: Enable MFC on universal_c210
  ARM: S5PV210: Enable MFC on Goni
  ARM: S5P: Add support for MFC device
  ARM: EXYNOS4: Add support FIMD on SMDKC210
  ARM: EXYNOS4: Add platform device and helper functions for FIMD
  ARM: EXYNOS4: Add resource definition for FIMD
  ARM: EXYNOS4: Change devname for FIMD clkdev
  ARM: SAMSUNG: Add IRQ_I2S0 definition
  ARM: SAMSUNG: Add platform device for idma
  ARM: EXYNOS4: Add more registers to be saved and restored for PM
  ARM: EXYNOS4: Add more register addresses of CMU
  ARM: EXYNOS4: Add platform device for dwmci driver
  ARM: EXYNOS4: configure rtc-s3c on NURI
  ARM: EXYNOS4: configure MAX8903 secondary charger on NURI
  ARM: EXYNOS4: configure ADC on NURI
  ARM: EXYNOS4: configure MAX17042 fuel gauge on NURI
  ARM: EXYNOS4: configure regulators and PMIC(MAX8997) on NURI
  ARM: EXYNOS4: Increase NR_IRQS for devices with more IRQs
  ...

Fix up tons of silly conflicts:
 - arch/arm/mach-davinci/include/mach/psc.h
 - arch/arm/mach-exynos4/Kconfig
 - arch/arm/mach-exynos4/mach-smdkc210.c
 - arch/arm/mach-exynos4/pm.c
 - arch/arm/mach-imx/mm-imx1.c
 - arch/arm/mach-imx/mm-imx21.c
 - arch/arm/mach-imx/mm-imx25.c
 - arch/arm/mach-imx/mm-imx27.c
 - arch/arm/mach-imx/mm-imx31.c
 - arch/arm/mach-imx/mm-imx35.c
 - arch/arm/mach-mx5/mm.c
 - arch/arm/mach-s5pv210/mach-goni.c
 - arch/arm/mm/Kconfig
2011-07-26 17:41:04 -07:00
Vinod Koul
f32807f1ff dmaengine: pl08x: handle the rest of enums in pl08x_width
pl08x_width function does not handle rest of enums for DMA_SLAVE_BUSWIDTH_xxxx
which causes gcc to emit below warining

drivers/dma/amba-pl08x.c: In function 'pl08x_width':
	drivers/dma/amba-pl08x.c:1119: warning: enumeration value
	'DMA_SLAVE_BUSWIDTH_UNDEFINED' not handled in switch
	drivers/dma/amba-pl08x.c:1119: warning: enumeration value
	'DMA_SLAVE_BUSWIDTH_8_BYTES' not handled in switch

this patch adds a default case which returns error

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-26 15:33:29 +05:30
Russell King - ARM Linux
760596c6b9 DMA: PL08x: cleanup selection of burst size
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-26 15:33:29 +05:30
Russell King - ARM Linux
121c8476a3 DMA: PL08x: avoid recalculating cctl at each prepare
Now that we have separate cctl values for M>P and P>M transfers, we can
avoid calculating the cctl value each time we prepare a transaction.
Move the bus selection and increment setting to the slave configuration
and initialization functions.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-26 15:33:29 +05:30
Russell King - ARM Linux
aa88cdaa14 DMA: PL08x: cleanup selection of buswidth
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-26 15:33:28 +05:30
Russell King - ARM Linux
f14c426c72 DMA: PL08x: separately store source/destination cctl
Store the source/destination cctl values into the channel structure.
This moves us towards being able to avoid a configuration call each
time we use the channel.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-26 15:33:28 +05:30
Russell King - ARM Linux
b207b4d02b DMA: PL08x: separately store source/destination slave address
Store the source/destination slave address separately into the channel
structure.  This moves us towards being able to avoid a configuration
call each time we use the channel.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-26 15:33:28 +05:30
Russell King - ARM Linux
fc74eb7915 DMA: PL08x: clean up LLI debugging
Clean up debugging when setting up the LLI list.  This reduces the
amount of output while preserving the information, and makes it easier
to read.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-26 15:33:28 +05:30
Russell King - ARM Linux
25c94f7fcf DMA: PL08x: select LLI bus only once per LLI setup
Avoid re-selecting the LLI bus each time we create an LLI.  Move it out
of the LLI setup loops.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-26 15:33:28 +05:30
Russell King - ARM Linux
f44bd19140 DMA: PL08x: remove unused constants
PL08X_WQ_PERIODMIN and PL08X_MAX_ALLOCS are not used, remove them.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-26 15:33:28 +05:30
Dong Aisheng
a62bae98a9 ARM: mxs-dma: reset after disable channel
We met some channels in abnormal state after disable.
Reset it to get a clean state.

Signed-off-by: Dong Aisheng <b29396@freescale.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-26 15:33:28 +05:30
Axel Lin
add56ba711 dma: intel_mid_dma: remove redundant pci_set_drvdata calls
Call pci_set_drvdata() once in intel_mid_dma_probe() is enough.
Remove redundant pci_set_drvdata() calls in dma_suspend() and dma_resume().

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-26 15:33:27 +05:30
Axel Lin
2a9778ed83 dma: mxs-dma: fix unterminated platform_device_id table
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-26 15:33:27 +05:30
Rob Herring
4e0e6109a1 dmaengine: pl330: make platform data optional
The pl330 needs platform data for describing peripheral connections, but
some platforms may only support memory to memory dma channels. In this
case, we can probe for how many channels there are and don't need the
platform data.

As memcpy requests don't need channel private data to hold peripheral
info, allow private data to be NULL in this case.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Vinod Koul <vkoul@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-26 15:32:52 +05:30
Linus Torvalds
d3ec4844d4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
  fs: Merge split strings
  treewide: fix potentially dangerous trailing ';' in #defined values/expressions
  uwb: Fix misspelling of neighbourhood in comment
  net, netfilter: Remove redundant goto in ebt_ulog_packet
  trivial: don't touch files that are removed in the staging tree
  lib/vsprintf: replace link to Draft by final RFC number
  doc: Kconfig: `to be' -> `be'
  doc: Kconfig: Typo: square -> squared
  doc: Konfig: Documentation/power/{pm => apm-acpi}.txt
  drivers/net: static should be at beginning of declaration
  drivers/media: static should be at beginning of declaration
  drivers/i2c: static should be at beginning of declaration
  XTENSA: static should be at beginning of declaration
  SH: static should be at beginning of declaration
  MIPS: static should be at beginning of declaration
  ARM: static should be at beginning of declaration
  rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check
  Update my e-mail address
  PCIe ASPM: forcedly -> forcibly
  gma500: push through device driver tree
  ...

Fix up trivial conflicts:
 - arch/arm/mach-ep93xx/dma-m2p.c (deleted)
 - drivers/gpio/gpio-ep93xx.c (renamed and context nearby)
 - drivers/net/r8169.c (just context changes)
2011-07-25 13:56:39 -07:00
Linus Torvalds
dd58ecba48 Merge branch 'next/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc
* 'next/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (35 commits)
  ARM: msm: platsmp: determine number of CPU cores at boot time
  ARM: Tegra: Seaboard: Fix I2C bus numbering for ADT7461
  ARM: Tegra: Trimslice: Tri-state DAP3 pinmux
  ARM: orion5x: fixup 5181 MPP mask check
  ARM: mxs-dma: include <linux/dmaengine.h>
  ARM: i.MX53: consistently use MX53_UART_PAD_CTRL for uart txd/rxd/rts/cts
  ARM: i.MX53: UARTn_CTS pin should not change RTS input select
  ARM: i.MX53: UARTn_TXD pin should not change RXD input select
  ARM: mx25: Fix typo on CAN1_RX pad setting
  iomux-mx53: add missing 'IOMUX_CONFIG_SION' for some I2C pad definitions
  ARM: NUC93X: add UL suffix to VMALLOC_END to ensure it is properly typed
  ARM: LPC32XXX: add UL suffix to VMALLOC_END to ensure it is properly typed
  ARM: CNS3XXX: add UL suffix to VMALLOC_END to ensure it is properly typed
  ARM: i.MX53: Fix IOMUX type o's
  ARM i.MX dma: Fix burstsize settings
  mach-mx5: fix the I2C clock parents
  ARM: mxs/tx28: according to the TX28's datasheet D4-D7 are not used for MMC0
  ARM i.MX23/28: platform-mxsfb: Add missing include of linux/dma-mapping.h
  ARM: mx53: Fix some interrupts marked as reserved.
  MXC: iomux-v3: correct NO_PAD_CTRL definition
  ...

Fix up trivial conflict in arch/arm/mach-imx/mach-mx31_3ds.c
2011-07-25 11:53:35 -07:00
Axel Lin
1c1d954753 dmaengine: imx-sdma: return proper error if kzalloc fails
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-25 19:11:12 +05:30
Tomoya MORINAGA
0b052f4a08 pch_dma: Fix CTL register access issue
Currently, Mode-Control register is accessed by read-modify-write.

According to DMA hardware specifications datasheet, prohibits this method.
Because this register resets to 0 by DMA HW after DMA transfer completes.
Thus, current read-modify-write processing can cause unexpected behavior.

The datasheet says in case of writing Mode-Control register, set the value for only target channel, the others must set '11b'.
e.g. Set DMA0=01b  DMA11=10b
CTL0=33333331h
CTL2=00002333h

NOTE:
CTL0 includes DMA0~7 Mode-Control register.
CTL2 includes DMA8~11 Mode-Control register.

This patch modifies the issue.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-25 19:11:12 +05:30
Linus Torvalds
7235dd74a4 Merge branch 'spi/next' of git://git.secretlab.ca/git/linux-2.6
* 'spi/next' of git://git.secretlab.ca/git/linux-2.6: (34 commits)
  spi/imx: add device tree probe support
  spi/imx: copy gpio number passed by platform data into driver private data
  spi/imx: use soc name in spi device type naming scheme
  spi/imx: merge type SPI_IMX_VER_0_7 into SPI_IMX_VER_0_4
  spi/imx: do not use spi_imx2_3 to name SPI_IMX_VER_2_3 function and macro
  spi/imx: use mx21 to name SPI_IMX_VER_0_0 function and macro
  spi/imx: do not make copy of spi_imx_devtype_data
  spi/dw: Add spi number into spi irq desc
  spi/tegra: Use engineering names in DT compatible property
  spi/fsl_spi: fix CPM spi driver
  mach-s3c2410: remove unused spi-gpio.h file
  spi: remove obsolete spi-s3c24xx-gpio driver
  mach-gta2: remove unused spi-gpio.h include
  mach-qt2410: convert to spi_gpio
  mach-jive: convert to spi_gpio
  spi/pxa2xx: Remove unavailable ssp_type from documentation
  spi/bfin_spi: uninline fat queue funcs
  spi/bfin_spi: constify pin array
  spi/bfin_spi: use structs for accessing hardware regs
  spi/topcliff-pch: Support new device ML7223 IOH
  ...

Fix up trivial conflict in arch/arm/mach-ep93xx/Makefile
2011-07-22 14:52:44 -07:00
Andi Kleen
9b487ced8a Avoid section type conflict in dma/ioat/dma_v3.c
const __read_mostly is not legal and causes section type conflicts.
That's because the read.mostly section is not read only.
Simply drop the __read_mostly designation.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
[drop __read_mostly instead of const]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-22 14:19:29 -07:00
Dave Jiang
3baef940f2 ioat: Adding PCI IDs for IOAT devices on SandyBridge platforms
Adding to pci_id.h and the device table for ioat.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-22 14:17:31 -07:00
Shawn Guo
95bfea1675 dmaengine: mxs-dma: skip request_irq for NO_IRQ
In general, the mxs-dma users get separate irq for each channel,
but gpmi is special one which has only one irq shared by all gpmi
channels.  It causes mxs_dma channel allocation function fail for
all other gpmi channels except the first one calling into the
function.

The patch gets request_irq call skipped for NO_IRQ case, and leaves
this gpmi specific quirk to gpmi driver to sort out.  It will fix
above problem if gpmi driver sets chan_irq as gpmi irq for only one
channel and NO_IRQ for all the rest channels.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-14 05:00:56 +05:30
Linus Walleij
b89243dd0e dmaengine/coh901318: fix slave submission semantics
While testing Per Forlins MMC speed improvements I noticed a
semantic bug in the COH901318 driver: it will write to channel
registers in the prep_slave_sg() function, instead of deferring
it to later, breaking the assumption from the drivers to be able
to queue up new jobs while another job is running. Fix this by
storing up the initial register writes in the job descriptors
and write them to hardware when we process the descriptor
instead. Now the stress tests work.

Acked-by: Per Forlin <per.forlin@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-14 04:56:59 +05:30
Rabin Vincent
98ca528916 dmaengine/ste_dma40: allow memory buswidth/burst to be configured
Currently the runtime config implementation forces the memory side
parameters to be the same as the peripheral side. Allow these to be
different, and check for misconfiguration.

Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com>
Tested-by: Stefan Nilsson <stefan.xk.nilsson@stericsson.com>
Reviewed-by: Per Forlin <per.forlin@stericsson.com>
Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Robert Marklund <robert.marklund@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-14 04:09:10 +05:30
Linus Walleij
f4b89764c4 dmaengine/ste_dma40: use AMBA PrimeCell helper macros
The DMA40 is not a PrimeCell from ARM, but it still use the same
ID registers. So let's utilize the existing macros in the
PrimeCell header to identify manufacturer and revision of the IP
block instead of reinventing the wheel.

Cc: Robert Marklund <robert.marklund@stericsson.com>
Cc: Per Forlin <per.forlin@linaro.org>
Cc: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-14 04:09:10 +05:30
Robert Marklund
79ca7ec3d1 dmaengine/ste_dma40: make the cyclic alloc NOWAIT
This function may be initiated from IRQ context, so the allocation
must allocate NOWAIT memory.

Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
Reviewed-by: Rabin Vincent <rabin.vincent@stericsson.com>
Reviewed-by: Philippe Langlais <philippe.langlais@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-14 04:09:10 +05:30
om prakash
ae752bf4cb dmaengine/ste_dma40: fix missing kernel-doc
Missing documentation creates kernel-doc warnings, so add
the documenation.

Signed-off-by: Om Prakash <omprakash.pal@stericsson.com>
Reviewed-by: Rabin Vincent <rabin.vincent@stericsson.com>
Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com>
Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-14 04:09:10 +05:30
Per Forlin
78fdaec341 dmaengine: remove ste_dma40 from issue_pending TODO
ste_dma40 now implements issue_pending according to documentation.
Submit adds descriptos to a pending queue with are flushed down to the DMAC
at issue_pending.

Signed-off-by: Per Forlin <per.forlin@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-14 04:02:08 +05:30
Per Forlin
a8f3067bce dmaengine/ste_dma40: add a separate queue for pending requests
tx_submit will add descriptors to the pending queue. Issue pending
will then move the pending descriptors to the transfer queue.

Signed-off-by: Per Forlin <per.forlin@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-14 04:02:08 +05:30
Alexander Stein
70f1891584 pch_dma: Fix channel locking
Fix for the following INFO message

=================================
[ INFO: inconsistent lock state ]
2.6.39+ #89
---------------------------------
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
rs232/822 [HC1[1]:SC0[0]:HE0:SE1] takes:
 (&(&pd_chan->lock)->rlock){?.....}, at: [<c123b9a1>] pdc_desc_get+0x16/0xab
{HARDIRQ-ON-W} state was registered at:
  [<c104fe28>] mark_irqflags+0xbd/0x11a
  [<c1050386>] __lock_acquire+0x501/0x6bb
  [<c1050945>] lock_acquire+0x63/0x7b
  [<c131c51d>] _raw_spin_lock_bh+0x43/0x51
  [<c123bee4>] pd_alloc_chan_resources+0x92/0x11e
  [<c123ad62>] dma_chan_get+0x9b/0x107
  [<c123b2d1>] __dma_request_channel+0x61/0xdc
  [<c11ba24b>] pch_request_dma+0x61/0x19e
  [<c11bb3b8>] pch_uart_startup+0x16a/0x1a2
  [<c11b8446>] uart_startup+0x87/0x147
  [<c11b9183>] uart_open+0x117/0x13e
  [<c11a5c7d>] tty_open+0x23c/0x34c
  [<c1097705>] chrdev_open+0x140/0x15f
  [<c10930a6>] __dentry_open.clone.14+0x14a/0x22b
  [<c1093dfb>] nameidata_to_filp+0x36/0x40
  [<c109f28b>] do_last+0x513/0x635
  [<c109f4af>] path_openat+0x9c/0x2aa
  [<c109f6e4>] do_filp_open+0x27/0x69
  [<c1093f02>] do_sys_open+0xfd/0x184
  [<c1093fad>] sys_open+0x24/0x2a
  [<c131d58c>] sysenter_do_call+0x12/0x32
irq event stamp: 2522
hardirqs last  enabled at (2521): [<c131ca3b>] _raw_spin_unlock_irqrestore+0x36/0x52
hardirqs last disabled at (2522): [<c131db27>] common_interrupt+0x27/0x34
softirqs last  enabled at (2354): [<c102fa11>] __do_softirq+0x10a/0x11a
softirqs last disabled at (2299): [<c10041a4>] do_softirq+0x57/0xa4

other info that might help us debug this:
2 locks held by rs232/822:
 #0:  (&tty->atomic_write_lock){+.+.+.}, at: [<c11a4b7a>] tty_write_lock+0x14/0x3c
 #1:  (&port_lock_key){-.....}, at: [<c11bad72>] pch_uart_interrupt+0x17/0x1e9

stack backtrace:
Pid: 822, comm: rs232 Not tainted 2.6.39+ #89
Call Trace:
 [<c1319f90>] ? printk+0x19/0x1b
 [<c104f893>] print_usage_bug+0x184/0x18f
 [<c104e5b1>] ? print_irq_inversion_bug+0x10e/0x10e
 [<c104f943>] mark_lock_irq+0xa5/0x1f6
 [<c104fc9c>] mark_lock+0x208/0x2d7
 [<c104fdc0>] mark_irqflags+0x55/0x11a
 [<c1050386>] __lock_acquire+0x501/0x6bb
 [<c10042ee>] ? dump_trace+0x92/0xb6
 [<c1050945>] lock_acquire+0x63/0x7b
 [<c123b9a1>] ? pdc_desc_get+0x16/0xab
 [<c131c2d0>] _raw_spin_lock+0x3e/0x4c
 [<c123b9a1>] ? pdc_desc_get+0x16/0xab
 [<c123b9a1>] pdc_desc_get+0x16/0xab
 [<c10504d8>] ? __lock_acquire+0x653/0x6bb
 [<c123bb2c>] pd_prep_slave_sg+0x7c/0x1cb
 [<c1006c3f>] ? nommu_map_sg+0x6e/0x81
 [<c11bace6>] dma_handle_tx+0x2cf/0x344
 [<c11bad72>] ? pch_uart_interrupt+0x17/0x1e9
 [<c11baebb>] pch_uart_interrupt+0x160/0x1e9
 [<c10642fb>] handle_irq_event_percpu+0x25/0x127
 [<c1064429>] handle_irq_event+0x2c/0x43
 [<c1065e0d>] ? handle_fasteoi_irq+0x84/0x84
 [<c1065eb9>] handle_edge_irq+0xac/0xce
 <IRQ>  [<c1003ecb>] ? do_IRQ+0x38/0x9d
 [<c131db2e>] ? common_interrupt+0x2e/0x34
 [<c105007b>] ? __lock_acquire+0x1f6/0x6bb
 [<c131ca3d>] ? _raw_spin_unlock_irqrestore+0x38/0x52
 [<c11b798b>] ? uart_start+0x2d/0x32
 [<c11b7998>] ? uart_flush_chars+0x8/0xa
 [<c11a7962>] ? n_tty_write+0x12c/0x1c6
 [<c1027a73>] ? try_to_wake_up+0x251/0x251
 [<c11a4d0b>] ? tty_write+0x169/0x1dc
 [<c11a7836>] ? n_tty_ioctl+0xb7/0xb7
 [<c1094841>] ? vfs_write+0x91/0x10d
 [<c11a4ba2>] ? tty_write_lock+0x3c/0x3c
 [<c1094a69>] ? sys_write+0x3e/0x63
 [<c131d58c>] ? sysenter_do_call+0x12/0x32

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Tested-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-14 03:40:08 +05:30
H Hartley Sweeten
4de1ba155b dma: mv_xor: use resource_size()
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Dan Williams <dan.j.williams@intel.com> (supporter:ASYNCHRONOUS TRAN...)
Cc: Vinod Koul <vinod.koul@intel.com> (supporter:DMA GENERIC OFFLO...)
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-14 03:32:31 +05:30
Jiri Kosina
b7e9c223be Merge branch 'master' into for-next
Sync with Linus' tree to be able to apply pending patches that
are based on newer code already present upstream.
2011-07-11 14:15:55 +02:00
Shawn Guo
2e534b21a5 dmaengine: imx-sdma: pass sdma firmware name via platform data
It is not good to have cpu_name and to_version encoded into sdma
firmware name as variables.  For example, there are three TOs of
imx51 soc, the sdma script never changes since TO1, which means
all three TOs of imx51 uses TO1 version of sdma script.  But we
have to prepare three identical firmwares, sdma-imx51-to1.bin
sdma-imx51-to2.bin and sdma-imx51-to3.bin, to have the kernel
capable of running on all three TOs.

The patch removes cpu_name and to_version from sdma platform data,
and instead uses fw_name to pass the firmware name, so that we can
pass the TO version where it's relevant and skip it where only one
firmware exists.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07 10:01:12 +02:00
Sascha Hauer
6584cb8825 ARM i.MX dma: Fix burstsize settings
dmaengine expects the maxburst parameter in words, not bytes.
The imxdma driver and its users do this wrong. Fix this.

As a side note the imx-pcm-dma-mx2 driver was 'fixed' to work
with imx-dma. This broke the driver with imx-sdma support which
correctly takes the maxburst parameter in words. This patch
puts the sdma based sound back to work.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07 09:55:50 +02:00
Guennadi Liakhovetski
a03a202e95 dmaengine: failure to get a specific DMA channel is not critical
There exist systems with multiple DMA controllers with different
capabilities. For example, on some sh-mobile / rmobile systems there are
DMA controllers, whose channels can be configured to be used with
SD- and MMC-host controllers, serial ports etc. Besides there are also
DMA controllers, that can only be used for one special function, e.g.,
for USB. In such cases the DMA client filter function can just choose
to specify to the DMA driver, which channel it needs. Then the
.device_alloc_chan_resources() method of the DMA driver will check,
whether it can provide that dunction. If not, it will fail and the loop
in __dma_request_channel() will continue to the next DMA device, until
it finds a suitable one. This works fine with just one minor glitch:
the kernel logs error messages like

dmaengine: failed to get <channel name>: (-<error code>)

after each such non-critical failure. This patch lowers priority of
this message to the debug level.

Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-06-24 16:13:16 +05:30
Alexey Dobriyan
b7f080cfe2 net: remove mm.h inclusion from netdevice.h
Remove linux/mm.h inclusion from netdevice.h -- it's unused (I've checked manually).

To prevent mm.h inclusion via other channels also extract "enum dma_data_direction"
definition into separate header. This tiny piece is what gluing netdevice.h with mm.h
via "netdevice.h => dmaengine.h => dma-mapping.h => scatterlist.h => mm.h".
Removal of mm.h from scatterlist.h was tried and was found not feasible
on most archs, so the link was cutoff earlier.

Hope people are OK with tiny include file.

Note, that mm_types.h is still dragged in, but it is a separate story.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-21 19:17:20 -07:00
Paul Mundt
f448e9c9da Merge branch 'common/dma' into sh-latest 2011-06-21 17:59:05 +09:00
Kuninori Morimoto
260bf2c5f6 dmaengine: shdma: add .needs_tend_set / .no_dmars flags
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-21 17:56:11 +09:00
Kuninori Morimoto
e76c3af873 dmaengine: shdma: add dmaor_is_32bit flag
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-21 17:56:07 +09:00
Kuninori Morimoto
67c6269e5c dmaengine: shdma: add chcr_ie_bit
IE bit position on CHCR register is not same in all DMAC.
This patch adds new "chcr_ie_bit" to decide it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-21 17:56:01 +09:00
Kuninori Morimoto
5899a723b3 dmaengine: shdma: add chcr_write/read function
CHCR register position is not same in all DMAC.
This patch adds new "chcr_offset" to decide it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-21 17:55:57 +09:00