Commit graph

69 commits

Author SHA1 Message Date
Alex Deucher
c43ae476a5 drm/edid: fix typo in 1600x1200@75 mode
Spotted by Scott Bertilson.
Fixes fdo bug 28146.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Reviewed-by: Mark Marshall <mark.marshall@csr.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-21 15:05:15 +10:00
Dave Airlie
1d42bbc8f7 drm/fbdev: fix cloning on fbcon
Simple cloning rules compared to server:
(a) single crtc
(b) > 1 connector active
(c) check command line mode
(d) try and find 1024x768 DMT mode if no command line.
(e) fail to clone

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 17:40:22 +10:00
Dan Carpenter
0ddfa7d574 drm: off by one in drm_edid.c
m == num_est3_modes is one past the end of the est3_modes[].

Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 16:19:31 +10:00
Adam Jackson
61dd98fad5 drm/edid: Fix 1024x768@85Hz
Having hsync both start and end on pixel 1072 ain't gonna work very
well.  Matches the X server's list.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Tested-By: Michael Tokarev <mjt@tls.msk.ru>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 15:57:39 +10:00
Dan Carpenter
0bcad4c95e drm/edid: remove an unneeded variable
We don't use timing_level any more after: 9cf00977da "drm/edid: Unify
detailed block parsing between base and extension blocks".

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 15:54:55 +10:00
Dave Airlie
c9c2625ff4 Merge branch 'drm-edid-fixes' into drm-core-next
* drm-edid-fixes:
  drm/edid: When checking duplicate standard modes, walked the probed list
  drm/edid: Fix sync polarity for secondary GTF curve
  drm/modes: Fix interlaced mode names
  drm/edid: Add secondary GTF curve support
  drm/edid: Strengthen the algorithm for standard mode codes
  drm/edid: Fix the HDTV hack.
  drm/edid: Extend range-based mode addition for EDID 1.4
  drm/edid: Add test for monitor reduced blanking support.
  drm/edid: Fix preferred mode parse for EDID 1.4
  drm/edid: Remove some silly comments
  drm/edid: Remove arbitrary EDID extension limit
  drm/edid: Add modes for Established Timings III section
  drm/edid: Reshuffle mode list construction to closer match the spec
  drm/edid: Remove a redundant check
  drm/edid: Remove some misleading comments
  drm/edid: Fix secondary block fetch.
2010-04-20 13:14:38 +10:00
Adam Jackson
522032da7e drm/edid: When checking duplicate standard modes, walked the probed list
... and not the global list.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-10 08:35:14 +10:00
Linus Torvalds
2f10ffcfb2 Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (29 commits)
  drm/nouveau: bail out of auxch transaction if we repeatedly recieve defers
  drm/nv50: implement gpio set/get routines
  drm/nv50: parse/use some more de-magiced parts of gpio table entries
  drm/nouveau: store raw gpio table entry in bios gpio structs
  drm/nv40: Init some tiling-related PGRAPH state.
  drm/nv50: Add NVA3 support in ctxprog/ctxvals generator.
  drm/nv50: another dodgy DP hack
  drm/nv50: punt hotplug irq handling out to workqueue
  drm/nv50: preserve an unknown SOR_MODECTRL value for DP encoders
  drm/nv50: Allow using the NVA3 new compute class.
  drm/nv50: cleanup properly if PDISPLAY init fails
  drm/nouveau: fixup the init failure paths some more
  drm/nv50: fix instmem init on IGPs if stolen mem crosses 4GiB mark
  drm/nv40: add LVDS table quirk for Dell Latitude D620
  drm/nv40: rework lvds table parsing
  drm/nouveau: detect vram amount once, and save the value
  drm/nouveau: remove some unused members from drm_nouveau_private
  drm/nouveau: Make use of TTM busy_placements.
  drm/nv50: add more 0x100c80 flushy magic
  drm/nv50: fix fbcon when framebuffer above 4GiB mark
  ...
2010-04-09 11:50:01 -07:00
Adam Jackson
ba1163de2f drm/edid/quirks: Envision EN2028
Claims 1280x1024 preferred, physically 1600x1200

cf. http://bugzilla.redhat.com/530399

Signed-off-by: Adam Jackson <ajax@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-07 10:10:35 +10:00
Adam Jackson
171fdd8929 drm/modes: Fix interlaced mode names
Height in frame size, not field size, and trailed with an 'i'.  Matches
the X server behaviour.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06 10:40:25 +10:00
Adam Jackson
7a37435008 drm/edid: Add secondary GTF curve support
Before CVT-R, some monitors would advertise support for an alternative
GTF formula with lower blanking intervals.  Correctly identify such
monitors, and use the alternative formula when generating modes for
them.

Note that we only do this for "standard" timing descriptors (tuples of
hsize in characters / aspect ratio / vertical refresh).  Range-based
mode lists still only refer to the primary GTF curve.  It would be
possible to do better for the latter case, but monitors are required to
support the primary curve over the entire advertised range, so all it
would win you is a lower pixel clock and therefore possibly better image
quality on analog links.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06 10:40:25 +10:00
Adam Jackson
7ca6adb379 drm/edid: Strengthen the algorithm for standard mode codes
If you have 1920x1200 in both detailed (probably RB) and standard
variants, you probably only want the RB version.  But we have no way of
guessing that from standard mode parse.  So, if a mode already exists
for a given w/h/r, skip adding it.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06 10:40:24 +10:00
Adam Jackson
a0910c8e37 drm/edid: Fix the HDTV hack.
Standard timings don't let you say 1366.  Both 1360 and 1368 have been
seen in the wild.  So invent a CVT timing for it.  CVT will round 1366 up
to 1368; we'll then manually underscan it.

Split this into two parts, since we need to do something sneaky between
them in the future.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06 10:40:23 +10:00
Adam Jackson
b17e52ef7e drm/edid: Extend range-based mode addition for EDID 1.4
1.4 adds better pixel clock precision, explicit reduced blanking
awareness, and extended sync ranges.  It's almost like a real spec.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06 10:40:23 +10:00
Adam Jackson
d1ff6409b1 drm/edid: Add test for monitor reduced blanking support.
The generic block walk callback looks like overkill, but we'll need it
for other detailed block walks in the future.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06 10:40:22 +10:00
Adam Jackson
a327f6b806 drm/edid: Fix preferred mode parse for EDID 1.4
In 1.4, the first detailed mode is always the preferred mode.  The bit
that used to mean that, now means "this mode is the physical size in
pixels".

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06 10:40:21 +10:00
Adam Jackson
59d8aff6e4 drm/edid: Remove some silly comments
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06 10:40:20 +10:00
Adam Jackson
7466f4cc50 drm/edid: Remove arbitrary EDID extension limit
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06 10:40:20 +10:00
Adam Jackson
2255be14cb drm/edid: Add modes for Established Timings III section
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06 10:40:19 +10:00
Adam Jackson
c867df7043 drm/edid: Reshuffle mode list construction to closer match the spec
Also, document what the spec says to do.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06 10:40:18 +10:00
Adam Jackson
2b470ab075 drm/edid: Remove a redundant check
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06 10:40:18 +10:00
Adam Jackson
fbcc06b643 drm/edid: Remove some misleading comments
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06 10:40:17 +10:00
Adam Jackson
61e57a8d72 drm/edid: Fix secondary block fetch.
This makes fetching the second EDID block on HDMI monitors actually
work.  DDC can't transfer more than 128 bytes at a time.  Also,
rearrange the code so the pure DDC bits are separate from block parse.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06 10:40:16 +10:00
Tejun Heo
336f5899d2 Merge branch 'master' into export-slabh 2010-04-05 11:37:28 +09:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Ben Skeggs
44fef22416 drm/edid: allow certain bogus edids to hit a fixup path rather than fail
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15 10:58:17 +10:00
Dave Airlie
eb6b6d7cdd Merge remote branch 'korg/drm-radeon-testing' into drm-next-stage
* korg/drm-radeon-testing: (62 commits)
  drm/radeon/kms: update new pll algo
  drm/radeon/kms: add support for square microtiles on r3xx-r5xx
  drm/radeon/kms: force pinning buffer into visible VRAM
  drm/radeon/kms/evergreen: fix typo in cursor code
  drm/radeon/kms: implement reading active PCIE lanes on R600+
  drm/radeon/kms: for downclocking non-mobility check PERFORMANCE state
  drm/radeon/kms: simplify storing current and requested PM mode
  drm/radeon: fixes for r6xx/r7xx gfx init
  drm/radeon/rv740: fix backend setup
  drm/radeon/kms: fix R3XX/R4XX memory controller initialization
  [rfc] drm/radeon/kms: pm debugging check for vbl.
  drm/radeon: Fix memory allocation failures in the preKMS command stream checking.
  drm: Add generic multipart buffer.
  drm/radeon/kms: simplify memory controller setup V2
  drm/radeon: Add asic hook for dma copy to r200 cards.
  drm/radeon/kms: Create asic structure for r300 pcie cards.
  drm/radeon/kms: remove unused r600_gart_clear_page
  drm/radeon/kms: remove HDP flushes from fence emit (v2)
  drm/radeon/kms: add LVDS pll quirk for Dell Studio 15
  drm/radeon/kms: simplify picking power state
  ...

Conflicts:
	drivers/gpu/drm/radeon/atom.c
	drivers/gpu/drm/radeon/atombios.h
	drivers/gpu/drm/radeon/atombios_dp.c
	drivers/gpu/drm/radeon/r600.c
	drivers/gpu/drm/radeon/r600_audio.c
	drivers/gpu/drm/radeon/r600_cp.c
	drivers/gpu/drm/radeon/radeon.h
	drivers/gpu/drm/radeon/radeon_connectors.c
	drivers/gpu/drm/radeon/radeon_ring.c
	drivers/gpu/drm/radeon/rv770.c
2010-02-26 16:23:23 +10:00
Adam Jackson
b58db2c6dd drm/edid: Fix interlaced detailed timings to be frame size, not field.
cf. https://bugzilla.redhat.com/show_bug.cgi?id=533561

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-18 15:03:16 +10:00
Alex Deucher
3c537889e1 drm/radeon/kms: add support for hardcoded edids in rom (v2)
Some servers hardcode an edid in rom so that they will
work properly with KVMs.  This is a port of the relevant
code from the ddx.

[airlied: reworked to validate edid at boot stage - and
remove special quirk, if there is a valid EDID in the BIOS rom
we'll just try and use it.]

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-09 09:31:20 +10:00
Jerome Glisse
79b7dcb2af drm: EDID accept separate sync video mode
X is accepting such video mode, do the same. Pointed out by Joshua Roys
on IRC. Fix https://bugzilla.redhat.com/show_bug.cgi?id=540024

[fix printf to use composite not integrated :- airlied]

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-15 13:29:52 +10:00
Adam Jackson
8e10ee9a0d drm/edid: Fix CVT width/height decode
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07 13:18:04 +10:00
Adam Jackson
69da301589 drm/edid: Skip empty CVT codepoints
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07 13:17:48 +10:00
Marin Mitov
29ebdf925c drm/kms: silencing a false positive warning.
warning: 'width' may be used uninitialized in this function
drivers/gpu/drm/drm_edid.c

Signed-off-by: Marin Mitov <mitov@issp.bas.bg>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-23 10:09:09 +10:00
Dave Airlie
1bd049fa89 Merge branch 'drm-core-next' into drm-linus
Bring all core drm changes into 2.6.32 tree and resolve
the conflict that occurs.

Conflicts:
	drivers/gpu/drm/drm_fb_helper.c
2009-12-08 13:52:41 +10:00
Adam Jackson
9340d8cfea drm/edid: Decode 3-byte CVT codes from EDID 1.4
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-04 08:53:47 +10:00
Adam Jackson
07a5e6324a drm/edid: Add DMT modes to the pool if the monitor is GTF-capable
See also: http://bugzilla.redhat.com/539785

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-04 08:53:32 +10:00
Adam Jackson
9cf00977da drm/edid: Unify detailed block parsing between base and extension blocks
Also fix an embarassing bug in standard timing subblock parsing that
would result in an infinite loop.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-04 08:53:07 +10:00
Jesse Barnes
7064fef563 drm: work around EDIDs with bad htotal/vtotal values
We did this on the userspace side, but we need a similar fix for the
kernel.

Fixes LP #460664.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-24 13:01:53 +10:00
Adam Jackson
862b89c069 drm/edid: Fix up partially corrupted headers
We'll still fail the block if it fails the EDID checksum though.

See also: http://bugzilla.redhat.com/534120

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-24 11:24:23 +10:00
Adam Jackson
47ee4ccf74 drm/edid: Retry EDID fetch up to four times
This matches the X server's retry logic.  Note that we'll only retry if
we get a DDC response but fail validation; legitimately disconnected
outputs will bomb out early.

See also: http://bugzilla.redhat.com/532957

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-24 11:24:22 +10:00
Adam Jackson
f985dedb57 drm/modes: Limit fallback modes to 60Hz
See also: http://bugzilla.redhat.com/514600

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-24 11:24:21 +10:00
Zhao Yakui
fcb4561144 drm: Add the basic check for the detailed timing in EDID
Sometimes we will get the incorrect display modeline when parsing the detailed
timing in EDID. For example:
   >hsync/vsync width is zero
   >sync is beyond the blank.

So add the basic check for the detailed timing in EDID to avoid the incorrect
display modeline.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-28 11:23:39 +10:00
Dave Airlie
d50ba256b5 drm/kms: start adding command line interface using fb.
[note this requires an fb patch posted to linux-fbdev-devel already]

This uses the normal video= command line option to control the kms
output setup at boot time. It is used to override the autodetection
done by kms.

video= normally takes a framebuffer as the first parameter, in kms
it will take a connector name, DVI-I-1, or LVDS-1 etc. If no output
connector is specified the mode string will apply to all connectors.

The mode specification used will match down the probed modes, and if
no mode is found it will add a CVT mode that matches.

video=1024x768 - all connectors match a 1024x768 mode or add a CVT on
video=VGA-1:1024x768, VGA-1 connector gets mode only.

The same strings as used in current fb modedb.c are used, except I've
added three more letters, e, D, d, e = enable, D = enable Digital,
d = disable, which allow a connector to be forced into a certain state.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-25 13:08:20 +10:00
Adam Jackson
f066a17d9f drm/edid: Fix standard timing parse for EDID <= 1.2
Aspect ratio code of 0 means 1:1 before EDID 1.3.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-24 09:46:08 +10:00
Adam Jackson
93dc6c2b0d drm/edid: Detailed standard timing blocks have six timings, not five.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-24 09:46:06 +10:00
Adam Jackson
23425caeeb drm/edid: Ignore bad standard timings.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-24 09:46:04 +10:00
Adam Jackson
083ae0560a drm/edid: const cleanup
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-24 09:46:03 +10:00
Adam Jackson
1ecff1eb0b drm: shut the EDID warnings up.
These really aren't all that useful.

taken from Fedora kernel.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-08 11:48:40 +10:00
Zhao Yakui
f0fda0a47b drm/kms: add a function that can add the mode for the output device without EDID
Add a function that can be used to add the default mode for the output device
without EDID.
It will add the default mode that meets with the requirements of given
hdisplay/vdisplay limit.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-07 18:44:40 +10:00
Zhao Yakui
559ee21d26 drm/kms: try to find the std mode in DMT table
When we need to add the standard timing mode, we will firstly check whether it
can be found in DMT table by comparing the hdisplay/vdisplay/vfresh_rate.
If it can't be found, then we will use the cvt/gtf to add the required mode.
If it can be found, it will be returned.

At the same time the function of drm_mode_vrefresh is also fixed. It will
return the result of actual refresh_rate plus 0.5.
For example:
When the calculated value is 84.9, then the fresh_rate is 85.
When the calculated value is 70.02, then the fresh_rate is 70.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-07 16:04:15 +10:00