Commit graph

23 commits

Author SHA1 Message Date
Joel Becker
1c520dfbf3 ocfs2: Provide the ocfs2_dlm_lvb_valid() stack API.
The Lock Value Block (LVB) of a DLM lock can be lost when nodes die and
the DLM cannot reconstruct its state.  Clients of the DLM need to know
this.

ocfs2's internal DLM, o2dlm, explicitly zeroes out the LVB when it loses
track of the state.  This is not a standard behavior, but ocfs2 has
always relied on it.  Thus, an o2dlm LVB is always "valid".

ocfs2 now supports both o2dlm and fs/dlm via the stack glue.  When
fs/dlm loses track of an LVBs state, it sets a flag
(DLM_SBF_VALNOTVALID) on the Lock Status Block (LKSB).  The contents of
the LVB may be garbage or merely stale.

ocfs2 doesn't want to try to guess at the validity of the stale LVB.
Instead, it should be checking the VALNOTVALID flag.  As this is the
'standard' way of treating LVBs, we will promote this behavior.

We add a stack glue API ocfs2_dlm_lvb_valid().  It returns non-zero when
the LVB is valid.  o2dlm will always return valid, while fs/dlm will
check VALNOTVALID.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
2009-06-22 14:24:30 -07:00
Mark Fasheh
009d37502a ocfs2: Remove pointless !!
ocfs2_stack_supports_plocks() doesn't need this to properly return a zero or
one value.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-10-13 17:02:44 -07:00
Mark Fasheh
53da4939f3 ocfs2: POSIX file locks support
This is actually pretty easy since fs/dlm already handles the bulk of the
work. The Ocfs2 userspace cluster stack module already uses fs/dlm as the
underlying lock manager, so I only had to add the right calls.

Cluster-aware POSIX locks ("plocks") can be turned off by the same means at
UNIX locks - mount with 'noflocks', or create a local-only Ocfs2 volume.
Internally, the file system uses two sets of file_operations, depending on
whether cluster aware plocks is required. This turns out to be easier than
implementing local-only versions of ->lock.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-10-13 13:57:57 -07:00
Joel Becker
d6817cdbd1 ocfs2: Increment the reference count of an already-active stack.
The ocfs2_stack_driver_request() function failed to increment the
refcount of an already-active stack.  It only did the increment on the
first reference.  Whoops.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Tested-by: Marcos Matsunaga <marcos.matsunaga@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-08-25 07:29:47 -07:00
Joel Becker
2c39450b39 ocfs2: Remove ->hangup() from stack glue operations.
The ->hangup() call was only used to execute ocfs2_hb_ctl.  Now that
the generic stack glue code handles this, the underlying stack drivers
don't need to know about it.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-06-16 10:46:52 -07:00
Joel Becker
9f9a99f4ec ocfs2: Move the call of ocfs2_hb_ctl into the stack glue.
Take o2hb_stop() out of the o2cb code and make it part of the generic
stack glue as ocfs2_leave_group().  This also allows us to remove the
ocfs2_get_hb_ctl_path() function - everything to do with hb_ctl is now
part of stackglue.c.  o2cb no longer needs a ->hangup() function.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-06-16 10:46:51 -07:00
Joel Becker
3878f110f7 ocfs2: Move the hb_ctl_path sysctl into the stack glue.
ocfs2 needs to call out to the hb_ctl program at unmount for all cluster
stacks.  The first step is to move the hb_ctl_path sysctl out of the
o2cb code and into the generic stack glue.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-06-16 10:46:50 -07:00
David Teigland
cf4d8d75d8 ocfs2: add fsdlm to stackglue
Add code to use fs/dlm.

[ Modified to be part of the stack_user module -- Joel ]

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:07 -07:00
Joel Becker
9c6c877c04 ocfs2: Add the 'cluster_stack' sysfs file.
Userspace can now query and specify the cluster stack in use via the
/sys/fs/ocfs2/cluster_stack file.  By default, it is 'o2cb', which is
the classic stack.  Thus, old tools that do not know how to modify this
file will work just fine.  The stack cannot be modified if there is a
live filesystem.

ocfs2_cluster_connect() now takes the expected cluster stack as an
argument.  This way, the filesystem and the stack glue ensure they are
speaking to the same backend.

If the stack is 'o2cb', the o2cb stack plugin is used.  For any other
value, the fsdlm stack plugin is selected.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:05 -07:00
Joel Becker
74ae4e104d ocfs2: Create stack glue sysfs files.
Introduce a set of sysfs files that describe the current stack glue
state.  The files live under /sys/fs/ocfs2.  The locking_protocol file
displays the version of ocfs2's locking code.  The
loaded_cluster_plugins file displays all of the currently loaded stack
plugins.  When filesystems are mounted, the active_cluster_plugin file
will display the plugin in use.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:05 -07:00
Joel Becker
286eaa95c5 ocfs2: Break out stackglue into modules.
We define the ocfs2_stack_plugin structure to represent a stack driver.
The o2cb stack code is split into stack_o2cb.c.  This becomes the
ocfs2_stack_o2cb.ko module.

The stackglue generic functions are similarly split into the
ocfs2_stackglue.ko module.  This module now provides an interface to
register drivers.  The ocfs2_stack_o2cb driver registers itself.  As
part of this interface, ocfs2_stackglue can load drivers on demand.
This is accomplished in ocfs2_cluster_connect().

ocfs2_cluster_disconnect() is now notified when a _hangup() is pending.
If a hangup is pending, it will not release the driver module and will
let _hangup() do that.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2008-04-18 08:56:05 -07:00
Joel Becker
e3dad42bf9 ocfs2: Create ocfs2_stack_operations and split out the o2cb stack.
Define the ocfs2_stack_operations structure.  Build o2cb_stack_ops from
all of the o2cb-specific stack functions.  Change the generic stack glue
functions to call the stack_ops instead of the o2cb functions directly.

The o2cb functions are moved to stack_o2cb.c.  The headers are cleaned up
to where only needed headers are included.

In this code, stackglue.c and stack_o2cb.c refer to some shared
extern variables.  When they become modules, that will change.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:05 -07:00
Joel Becker
553aa7e408 ocfs2: Split o2cb code from generic stack functions.
Split off the o2cb-specific funtionality from the generic stack glue
calls.  This is a precurser to wrapping the o2cb functionality in an
operations vector.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:05 -07:00
Joel Becker
63e0c48ae6 ocfs2: Clean up stackglue initialization
The stack glue initialization function needs a better name so that it can be
used cleanly when stackglue becomes a module.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:05 -07:00
Joel Becker
cf0acdcd64 ocfs2: Abstract out a debugging function for underlying dlms.
dlmglue.c was still referencing a raw o2dlm lksb in one instance.  Let's
create a generic ocfs2_dlm_dump_lksb() function.  This allows underlying
DLMs to print whatever they want about their lock.

We then move the o2dlm dump into stackglue.c where it belongs.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:04 -07:00
Joel Becker
de551246e7 ocfs2: Remove CANCELGRANT from the view of dlmglue.
o2dlm has the non-standard behavior of providing a cancel callback
(unlock_ast) even when the cancel has failed (the locking operation
succeeded without canceling).  This is called CANCELGRANT after the
status code sent to the callback.  fs/dlm does not provide this
callback, so dlmglue must be changed to live without it.
o2dlm_unlock_ast_wrapper() in stackglue now ignores CANCELGRANT calls.

Because dlmglue no longer sees CANCELGRANT, ocfs2_unlock_ast() no longer
needs to check for it.  ocfs2_locking_ast() must catch that a cancel was
tried and clear the cancel state.

Making these changes opens up a locking race.  dlmglue uses the the
OCFS2_LOCK_BUSY flag to ensure only one thread is calling the dlm at any
one time.  But dlmglue must unlock the lockres before calling into the
dlm.  In the small window of time between unlocking the lockres and
calling the dlm, the downconvert thread can try to cancel the lock.  The
downconvert thread is checking the OCFS2_LOCK_BUSY flag - it doesn't
know that ocfs2_dlm_lock() has not yet been called.

Because ocfs2_dlm_lock() has not yet been called, the cancel operation
will just be a no-op.  There's nothing to cancel.  With CANCELGRANT,
dlmglue uses the CANCELGRANT callback to clear up the cancel state.
When it comes around again, it will retry the cancel.  Eventually, the
first thread will have called into ocfs2_dlm_lock(), and either the
lock or the cancel will succeed.  The downconvert thread can then do its
downconvert.

Without CANCELGRANT, there is nothing to clean up the cancellation
state.  The downconvert thread does not know to retry its operations.
More importantly, the original lock may be blocking on the other node
that is trying to cancel us.  With neither able to make progress, the
ast is never called and the cancellation state is never cleaned up that
way.  dlmglue is deadlocked.

The OCFS2_LOCK_PENDING flag is introduced to remedy this window.  It is
set at the same time OCFS2_LOCK_BUSY is.  Thus, the downconvert thread
can check whether the lock is cancelable.  If not, it just loops around
to try again.  Once ocfs2_dlm_lock() is called, the thread then clears
OCFS2_LOCK_PENDING and wakes the downconvert thread.  Now, if the
downconvert thread finds the lock BUSY, it can safely try to cancel it.
Whether the cancel works or not, the state will be properly set and the
lock processing can continue.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:04 -07:00
Joel Becker
6953b4c008 ocfs2: Move o2hb functionality into the stack glue.
The last bit of classic stack used directly in ocfs2 code is o2hb.
Specifically, the check for heartbeat during mount and the call to
ocfs2_hb_ctl during unmount.

We create an extra API, ocfs2_cluster_hangup(), to encapsulate the call
to ocfs2_hb_ctl.  Other stacks will just leave hangup() empty.

The check for heartbeat is moved into ocfs2_cluster_connect().  It will
be matched by a similar check for other stacks.

With this change, only stackglue.c includes cluster/ headers.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:04 -07:00
Joel Becker
19fdb624dc ocfs2: Abstract out node number queries.
ocfs2 asks the cluster stack for the local node's node number for two
reasons; to fill the slot map and to print it. While the slot map isn't
necessary for userspace cluster stacks, the printing is very nice for
debugging. Thus we add ocfs2_cluster_this_node() as a generic API to get
this value. It is anticipated that the slot map will not be used under a
userspace cluster stack, so validity checks of the node num only need to
exist in the slot map code. Otherwise, it just gets used and printed as an
opaque value.

[ Fixed up some "int" versus "unsigned int" issues and made osb->node_num
  truly opaque. --Mark ]

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:04 -07:00
Joel Becker
4670c46ded ocfs2: Introduce the new ocfs2_cluster_connect/disconnect() API.
This step introduces a cluster stack agnostic API for initializing and
exiting.  fs/ocfs2/dlmglue.c no longer uses o2cb/o2dlm knowledge to
connect to the stack.  It is all handled in stackglue.c.

heartbeat.c no longer needs to know how it gets called.
ocfs2_do_node_down() is now a clean recovery trigger.

The big gotcha is the ordering of initializations and de-initializations done
underneath ocfs2_cluster_connect().  ocfs2_dlm_init() used to do all
o2dlm initialization in one block.  Thus, the o2dlm functionality of
ocfs2_cluster_connect() is very straightforward.  ocfs2_dlm_shutdown(),
however, did a few things between de-registration of the eviction
callback and actually shutting down the domain.  Now de-registration and
shutdown of the domain are wrapped within the single
ocfs2_cluster_disconnect() call.  I've checked the code paths to make
sure we can safely tear down things in ocfs2_dlm_shutdown() before
calling ocfs2_cluster_disconnect().  The filesystem has already set
itself to ignore the callback.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:04 -07:00
Joel Becker
8f2c9c1b16 ocfs2: Create the lock status block union.
Wrap the lock status block (lksb) in a union.  Later we will add a union
element for the fs/dlm lksb.  Create accessors for the status and lvb
fields.

Other than a debugging function, dlmglue.c does not directly reference
the o2dlm locking path anymore.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:04 -07:00
Joel Becker
7431cd7e8d ocfs2: Use -errno instead of dlm_status for ocfs2_dlm_lock/unlock() API.
Change the ocfs2_dlm_lock/unlock() functions to return -errno values.
This is the first step towards elminiating dlm_status in
fs/ocfs2/dlmglue.c.  The change also passes -errno values to
->unlock_ast().

[ Fix a return code in dlmglue.c and change the error translation table into
  an array of ints. --Mark ]

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:03 -07:00
Joel Becker
bd3e76105d ocfs2: Use global DLM_ constants in generic code.
The ocfs2 generic code should use the values in <linux/dlmconstants.h>.
stackglue.c will convert them to o2dlm values.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:03 -07:00
Joel Becker
24ef1815e5 ocfs2: Separate out dlm lock functions.
This is the first in a series of patches to isolate ocfs2 from the
underlying cluster stack. Here we wrap the dlm locking functions with
ocfs2-specific calls. Because ocfs2 always uses the same dlm lock status
callbacks, we can eliminate the callbacks from the filesystem visible
functions.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:03 -07:00