Commit graph

792 commits

Author SHA1 Message Date
Masanari Iida
e1d1d68aae watchdog: Fix typo in Kconfig
Correct spelling "overidden" to "overridden" in
drivers/watchdog/Kconfig

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-02-28 17:08:48 +01:00
MyungJoo Ham
78d3e00bb0 watchdog: fix error in probe() of s3c2410_wdt (reset at booting)
Probe function of s3c2410 watchdog calls request_irq before initializing
required value (wdt_count). This incurs resetting watchdog counter value
and watchdog-reboot during booting up.

This patch addresses such an issue by calling request_irq later.

Error handling in probe function and calling oder in remove function are
also revised accordingly.

Reported-by: Chanwoo Park <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-02-28 17:08:42 +01:00
Maxim Uvarov
97d2a10d58 watchdog: hpwdt: clean up set_memory_x call for 32 bit
1. address has to be page aligned.
2. set_memory_x uses page size argument, not size.
Bug causes with following commit:
	commit da28179b4e90dda56912ee825c7eaa62fc103797
	Author: Mingarelli, Thomas <Thomas.Mingarelli@hp.com>
	Date:   Mon Nov 7 10:59:00 2011 +0100

     watchdog: hpwdt: Changes to handle NX secure bit in 32bit path

    commit e67d668e14 upstream.

    This patch makes use of the set_memory_x() kernel API in order
    to make necessary BIOS calls to source NMIs.

Signed-off-by: Maxim Uvarov <maxim.uvarov@oracle.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: stable <stable@vger.kernel.org>
2012-02-28 17:08:36 +01:00
Jean-Christophe PLAGNIOL-VILLARD
5e9cf5e18d ARM: at91: make ST (System Timer) soc independent
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Reviewed-by: Ryan Mallon <rmallon@gmail.com>
2012-02-23 09:26:01 +01:00
Seth Heasley
84e83c2846 watchdog: iTCO_wdt: add Intel Lynx Point DeviceIDs
This patch adds the TCO Watchdog DeviceIDs for the Intel Lynx Point PCH.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27 10:01:16 +01:00
Axel Lin
f6dd94f819 watchdog: via_wdt: Set min_timeout and max_timeout for wdt_dev
Let the watchdog core to check the valid value range of min_timeout/max_timeout.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27 10:00:53 +01:00
Masanari Iida
b1785dfd4f watchdog: Fix typo "unexpectdly"
Correct typo "unexpectdly" to "unexpectedly" in pnx4008_wdt.c
and stmp3xxx_wdt.c

Signed-off-by: Masanari Iida<standby24x7@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27 10:00:15 +01:00
Axel Lin
8a062ac693 watchdog: wafer5823wdt: Fix handling WDIOS_DISABLECARD/WDIOS_ENABLECARD options
While receiving WDIOS_DISABLECARD option for WDIOC_SETOPTIONS command,
call wafwdt_stop() to disable watchdog.
Call wafwdt_start() while receiving WDIOS_ENABLECARD option.

Current code has reverse behavior.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27 09:55:13 +01:00
Axel Lin
ebe06e826f watchdog: wm8350_wdt: Fix handling WDIOS_DISABLECARD/WDIOS_ENABLECARD options
While receiving WDIOS_DISABLECARD option for WDIOC_SETOPTIONS command,
call wm8350_wdt_stop() to disable watchdog.
Call wm8350_wdt_start() while receiving WDIOS_ENABLECARD option.

Current code has reverse behavior.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27 09:55:04 +01:00
Axel Lin
2865e770c9 watchdog: Return proper error in nuc900wdt_probe if misc_register fails
Return proper error instead of 0 if misc_register fails

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27 09:54:51 +01:00
Axel Lin
e352829a67 watchdog: Staticise nuc900_wdt
It is only used in this driver, so no need to make the symbol global.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27 09:54:41 +01:00
Axel Lin
0318e286f9 watchdog: via_wdt: Staticise wdt_pci_table
It is only used in this driver, so no need to make the symbol global.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Marc Vertes <marc.vertes@sigfox.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27 09:54:12 +01:00
Shubhrajyoti D
12c583d8dc watchdog: omap_wdt.c: Fix the mismatch of pm_runtime enable and disable
Currently the watchdog driver calls the pm_runtime_enable and never
the disable. This may cause a warning when pm_runtime_enable
checks for the count match.

Also fixes the error

/build/watchdog # insmod omap_wdt.ko
[   44.999389] omap_wdt omap_wdt: Unbalanced pm_runtime_enable!
[   45.011047] OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
/build/watchdog #

Attempting to fix the same by calling pm_runtime_disable.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27 09:53:53 +01:00
Julia Lawall
52ea9a7d79 watchdog: dw_wdt.c: use devm_request_and_ioremap
Reimplement a call to devm_request_mem_region followed by a call to ioremap
or ioremap_nocache by a call to devm_request_and_ioremap.

The semantic patch that makes this transformation is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@nm@
expression myname;
identifier i;
@@

struct platform_driver i = { .driver = { .name = myname } };

@@
expression dev,res,size;
expression nm.myname;
@@

-if (!devm_request_mem_region(dev, res->start, size,
-                              \(res->name\|dev_name(dev)\|myname\))) {
-   ...
-   return ...;
-}
... when != res->start
(
-devm_ioremap(dev,res->start,size)
+devm_request_and_ioremap(dev,res)
|
-devm_ioremap_nocache(dev,res->start,size)
+devm_request_and_ioremap(dev,res)
)
... when any
    when != res->start
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27 09:53:28 +01:00
Julia Lawall
5d32d4868a watchdog: imx2_wdt.c: use devm_request_and_ioremap
Reimplement a call to devm_request_mem_region followed by a call to ioremap
or ioremap_nocache by a call to devm_request_and_ioremap.

The variable res_size is then no longer needed.

The semantic patch that makes this transformation is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@nm@
expression myname;
identifier i;
@@

struct platform_driver i = { .driver = { .name = myname } };

@@
expression dev,res,size;
expression nm.myname;
@@

-if (!devm_request_mem_region(dev, res->start, size,
-                              \(res->name\|dev_name(dev)\|myname\))) {
-   ...
-   return ...;
-}
... when != res->start
(
-devm_ioremap(dev,res->start,size)
+devm_request_and_ioremap(dev,res)
|
-devm_ioremap_nocache(dev,res->start,size)
+devm_request_and_ioremap(dev,res)
)
... when any
    when != res->start
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27 09:53:19 +01:00
Rusty Russell
90ab5ee941 module_param: make bool parameters really bool (drivers & misc)
module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.

Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-13 09:32:20 +10:30
Linus Torvalds
88266917b5 Merge git://www.linux-watchdog.org/linux-watchdog
* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: omap_wdt.c: fix the WDIOC_GETBOOTSTATUS ioctl if not implemented.
  watchdog: new driver for VIA chipsets
  watchdog: ath79_wdt: flush register writes
  drivers/watchdog/lantiq_wdt.c: drop iounmap for devm_ allocated data
  watchdog: documentation: describe nowayout in coversion-guide
  watchdog: documentation: update index file
  watchdog: Convert wm831x driver to devm_kzalloc()
  watchdog: add nowayout helpers to Watchdog Timer Driver Kernel API
  watchdog: convert drivers/watchdog/* to use module_platform_driver()
  watchdog: Use DEFINE_SPINLOCK() for static spinlocks
  watchdog: Convert Wolfson drivers to module_platform_driver
2012-01-10 10:29:23 -08:00
Linus Torvalds
acc952c1f3 Cleanups on various subarchitectures
Cleanup patches for various ARM platforms and some of their associated
 drivers, the bulk of these is for mach-91.
 
 I ended up pulling in the restart branch from Russell in order to
 fix up some simple but annoying merge conflicts.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIVAwUATwtcbmCrR//JCVInAQLONg/+PnaGQ9gt+dRQD1kzvOl1uE4veBD4KJ3j
 k3ew36OpcbkjKbcZjkN42tXbM5nBAC5A9w+iKy0RZvvxO+iay8A3IdYhlnpJhMCY
 LLvv8bUltR3iB5BPJO8MXgUAkHbec/8yGZ+Zu9LfQOC8LvaXW4ARiy7RLuA01MAM
 EUyL0cSAS5iztlJ1j9qwaQ+k6kReLSVkG1MRcTjPwHu75zWA2ADdQmkfb1jo6v9o
 3NF4QX2aw2tpPWn7B443irVLiZFG01gBugktl2z4VcNEHLHaU7eJUddh9146FVFd
 WZPz6y4qJHXJkAsL2QdEHwCet2yphf32XXAGJVVOSsr5EEqfAawPLQCt8qPaN6Un
 M+BLVlf3Wtv6JmGC+ECYvHEKdu04Zw1ia43cG7VOCgpoZjdo2HgaHIjL2t96Zj7N
 OpESMNiSp8++G7Gw+TxovDG93nBT459A12i3xhf/ljz2X1ADDSc6S0h+Vfi17201
 XcLH9ctJn17TfO8+KBwSYM3W3V1I6APHoKRN41q4u+fHnxu93jLnMeGDqRyscxRq
 BWvH1XmbkLBEb0HPtN30rTkVEnOMx4ZozM6/htVrdSRLKO+ss7XCRXLbWZxx3mWb
 sCvc1E5A1GmPmhOE8P+DqFVZlZXsIVHPsnp/nLjzCZFsIv0x2RdGjd7wXK605z0Z
 d+u3fNUEiHA=
 =9q+1
 -----END PGP SIGNATURE-----

Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Cleanups on various subarchitectures

Cleanup patches for various ARM platforms and some of their associated
drivers, the bulk of these is for mach-91.

Arnd ended up pulling in the restart branch from Russell in order to
fix up some simple but annoying merge conflicts.

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits)
  arm/at91: fix build of stamp9g20
  ARM: u300: delete memory.h
  MAINTAINERS: add maintainer entry for Picochip picoxcell
  ARM: picoxcell: move io mappings to common.c
  ARM: picoxcell: don't reserve irq_descs
  ARM: picoxcell: remove mach/memory.h
  ARM: at91: delete the pcontrol_g20_defconfig
  arm/tegra: Remove code that's ifndef CONFIG_ARM_GIC
  arm/tegra: remove unused defines
  arm/tegra: fix variable formatting in makefile
  ARM: davinci: vpif: move code to driver core header from platform
  ARM: at91/gpio: fix display of number of irq setuped
  ARM: at91/gpio: drop PIN_BASE
  ARM: at91/udc: use gpio_is_valid to check the gpio
  ARM: at91/ohci: use gpio_is_valid to check the gpio
  ARM: at91/nand: use gpio_is_valid to check the gpio
  ARM: at91/mmc: use gpio_is_valid to check the gpio
  ARM: at91/ide: use gpio_is_valid to check the gpio
  ARM: at91/pata: use gpio_is_valid to check the gpio
  ARM: at91/soc: use gpio_is_valid to check the gpio
  ...
2012-01-09 14:21:03 -08:00
Linus Torvalds
98793265b4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (53 commits)
  Kconfig: acpi: Fix typo in comment.
  misc latin1 to utf8 conversions
  devres: Fix a typo in devm_kfree comment
  btrfs: free-space-cache.c: remove extra semicolon.
  fat: Spelling s/obsolate/obsolete/g
  SCSI, pmcraid: Fix spelling error in a pmcraid_err() call
  tools/power turbostat: update fields in manpage
  mac80211: drop spelling fix
  types.h: fix comment spelling for 'architectures'
  typo fixes: aera -> area, exntension -> extension
  devices.txt: Fix typo of 'VMware'.
  sis900: Fix enum typo 'sis900_rx_bufer_status'
  decompress_bunzip2: remove invalid vi modeline
  treewide: Fix comment and string typo 'bufer'
  hyper-v: Update MAINTAINERS
  treewide: Fix typos in various parts of the kernel, and fix some comments.
  clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR
  gpio: Kconfig: drop unknown symbol 'CS5535_GPIO'
  leds: Kconfig: Fix typo 'D2NET_V2'
  sound: Kconfig: drop unknown symbol ARCH_CLPS7500
  ...

Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new
kconfig additions, close to removed commented-out old ones)
2012-01-08 13:21:22 -08:00
Linus Torvalds
7affca3537 Merge branch 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
* 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (73 commits)
  arm: fix up some samsung merge sysdev conversion problems
  firmware: Fix an oops on reading fw_priv->fw in sysfs loading file
  Drivers:hv: Fix a bug in vmbus_driver_unregister()
  driver core: remove __must_check from device_create_file
  debugfs: add missing #ifdef HAS_IOMEM
  arm: time.h: remove device.h #include
  driver-core: remove sysdev.h usage.
  clockevents: remove sysdev.h
  arm: convert sysdev_class to a regular subsystem
  arm: leds: convert sysdev_class to a regular subsystem
  kobject: remove kset_find_obj_hinted()
  m86k: gpio - convert sysdev_class to a regular subsystem
  mips: txx9_sram - convert sysdev_class to a regular subsystem
  mips: 7segled - convert sysdev_class to a regular subsystem
  sh: dma - convert sysdev_class to a regular subsystem
  sh: intc - convert sysdev_class to a regular subsystem
  power: suspend - convert sysdev_class to a regular subsystem
  power: qe_ic - convert sysdev_class to a regular subsystem
  power: cmm - convert sysdev_class to a regular subsystem
  s390: time - convert sysdev_class to a regular subsystem
  ...

Fix up conflicts with 'struct sysdev' removal from various platform
drivers that got changed:
 - arch/arm/mach-exynos/cpu.c
 - arch/arm/mach-exynos/irq-eint.c
 - arch/arm/mach-s3c64xx/common.c
 - arch/arm/mach-s3c64xx/cpu.c
 - arch/arm/mach-s5p64x0/cpu.c
 - arch/arm/mach-s5pv210/common.c
 - arch/arm/plat-samsung/include/plat/cpu.h
 - arch/powerpc/kernel/sysfs.c
and fix up cpu_is_hotpluggable() as per Greg in include/linux/cpu.h
2012-01-07 12:03:30 -08:00
Linus Torvalds
d3d0b02434 Merge branch 'amba-modalias' of git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm
* 'amba-modalias' of git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm:
  sound: aaci: Enable module alias autogeneration for AMBA drivers
  watchdog: sp805: Enable module alias autogeneration for AMBA drivers
  fbdev: amba: Enable module alias autogeneration for AMBA drivers
  serial: pl011: Enable module alias autogeneration for AMBA drivers
  serial: pl010: Enable module alias autogeneration for AMBA drivers
  spi: pl022: Enable module alias autogeneration for AMBA drivers
  rtc: pl031: Enable module alias autogeneration for AMBA drivers
  rtc: pl030: Enable module alias autogeneration for AMBA drivers
  mmc: mmci: Enable module alias autogeneration for AMBA drivers
  input: ambakmi: Enable module alias autogeneration for AMBA drivers
  gpio: pl061: Enable module alias autogeneration for AMBA drivers
  dmaengine: pl330: Enable module alias autogeneration for AMBA drivers
  dmaengine: pl08x: Enable module alias autogeneration for AMBA drivers
  hwrng: nomadik: Enable module alias autogeneration for AMBA drivers
  ARM: amba: Auto-generate AMBA driver module aliases during modpost
  ARM: amba: Move definition of struct amba_id to mod_devicetable.h
2012-01-06 18:03:30 -08:00
Greg Kroah-Hartman
ff4b8a57f0 Merge branch 'driver-core-next' into Linux 3.2
This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file,
and it fixes the build error in the arch/x86/kernel/microcode_core.c
file, that the merge did not catch.

The microcode_core.c patch was provided by Stephen Rothwell
<sfr@canb.auug.org.au> who was invaluable in the merge issues involved
with the large sysdev removal process in the driver-core tree.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-06 11:42:52 -08:00
Shubhrajyoti D
e2bf7c4c22 watchdog: omap_wdt.c: fix the WDIOC_GETBOOTSTATUS ioctl if not implemented.
WDIOC_GETBOOTSTATUS ioctl is imlemented for cpu_is_omap16xx and cpu_is_omap24xx
cpus only. For other cpus it falls through to WDIOC_KEEPALIVE.
This patch prevents the fall through.

Cc: sricharan <r.sricharan@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-06 16:33:31 +01:00
Marc Vertes
dc3c56b703 watchdog: new driver for VIA chipsets
New driver for the hardware watchdog timer on VIA chipsets.
This driver uses the new watchdog framework.
PnP must be enabled in BIOS to get full control of watchdog registers.
The timer code has been added by Wim Van Sebroeck.
Tested on a Artigo A1100, VX855 chipset.

Signed-off-by: Marc Vertes <marc.vertes@sigfox.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-06 15:33:41 +01:00
Gabor Juhos
86955e2bcb watchdog: ath79_wdt: flush register writes
The watchdog register writes required to have a flush
in order to commit the values to the register. Without
the flush, the driver not function correctly on AR934X
SoCs.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-06 15:27:51 +01:00
Julia Lawall
60daac4a90 drivers/watchdog/lantiq_wdt.c: drop iounmap for devm_ allocated data
Data allocated with devm_ioremap or devm_ioremap_nocache should not be
freed using iounmap, because doing so causes a dangling pointer, and a
subsequent double free.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
expression x;
@@
(
 x = devm_ioremap(...)
|
 x = devm_ioremap_nocache(...)
)

@@
expression r.x;
@@
* iounmap(x)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-06 15:27:30 +01:00
Mark Brown
7b9bb6d8cf watchdog: Convert wm831x driver to devm_kzalloc()
Saves a small amount of code and systematically eliminates leaks.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-06 15:24:00 +01:00
Wim Van Sebroeck
ff0b3cd4a4 watchdog: add nowayout helpers to Watchdog Timer Driver Kernel API
Add two nowayout helpers for the Watchdog Timer Driver Kernel API.
And apply this to the already converted drivers.
Note: s3c2410_wdt lost the nowayout feature during the conversion.

Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-06 15:22:04 +01:00
Axel Lin
b8ec61189f watchdog: convert drivers/watchdog/* to use module_platform_driver()
This patch converts the drivers in drivers/watchdog/* to use the
module_platform_driver() macro which makes the code smaller and a bit
simpler.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Nicolas Thill <nico@openwrt.org>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Marc Zyngier <maz@misterjones.org>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Alejandro Cabrera <aldaya@gmail.com>
Cc: "George G. Davis" <gdavis@mvista.com>
Cc: Sylver Bruneau <sylver.bruneau@googlemail.com>
Cc: Vitaly Wool <vital@embeddedalley.com>
Cc: Mika Westerberg <mika.westerberg@iki.fi>
Cc: Timo Kokkonen <timo.t.kokkonen@nokia.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-06 15:17:25 +01:00
Axel Lin
1334f32938 watchdog: Use DEFINE_SPINLOCK() for static spinlocks
Rather than just defining static spinlock_t variables and then
initializing them later in init functions, simply define them with
DEFINE_SPINLOCK() and remove the calls to spin_lock_init().

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Nicolas Thill <nico@openwrt.org>
Cc: Heiko Ronsdorf <hero@ihg.uni-duisburg.de>
Cc: Rodolfo Giometti <giometti@ascensit.com>
Cc: Andrey Panin <pazke@donpac.ru>
Cc: Guido Guenther <agx@sigxcpu.org>
Cc: Curt E Bruns <curt.e.bruns@intel.com>
Cc: Deepak Saxena <dsaxena@plexity.net>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: George G. Davis <gdavis@mvista.com>
Cc: Sylver Bruneau <sylver.bruneau@googlemail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-06 15:17:17 +01:00
Mark Brown
216f3ad9aa watchdog: Convert Wolfson drivers to module_platform_driver
Factors out some boilerplate code.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-06 15:16:18 +01:00
Al Viro
d36b691077 misc latin1 to utf8 conversions
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-01-02 13:04:55 +01:00
Wim Van Sebroeck
0d098587ce watchdog: iTCO_wdt.c - problems with newer hardware due to SMI clearing (part 2)
Redhat Bugzilla: Bug 727875 - TCO_EN bit is disabled by TCO driver

The previous patch breaks reset watchdog behaviour on the older hardware.
It is therefor better to make sure that the behaviour for older hardware (<=ICH5 or
6300ESB) is preserved and that the behaviour for newer hardware is changed.
We therefor use the iTCO_version to see if we need the clearing of the SMI_TCO_EN
bit in the SMI_EN register.

So the new behaviour becomes:
turn_SMI_watchdog_clear_off=0 -> Do not turn off SMI clearing watchdog.
turn_SMI_watchdog_clear_off=1 -> Turn off SMI clearing watchdog when iTCO_version=1
				 (ICHO till ICH5 + 6300ESB only)
turn_SMI_watchdog_clear_off=2 -> Turn off SMI clearing watchdog.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-12-27 20:35:59 +01:00
Mingarelli, Thomas
e67d668e14 watchdog: hpwdt: Changes to handle NX secure bit in 32bit path
This patch makes use of the set_memory_x() kernel API in order
to make necessary BIOS calls to source NMIs.

This is needed for SLES11 SP2 and the latest upstream kernel as it appears
the NX Execute Disable has grown in its control.

Signed-off by: Thomas Mingarelli <thomas.mingarelli@hp.com>
Signed-off by: Wim Van Sebroeck <wim@iguana.be>
Cc: stable@kernel.org
2011-12-26 15:14:38 +01:00
Nick Bowler
bb558dac67 watchdog: sp805: Fix section mismatch in ID table.
The AMBA ID table is marked as __initdata, yet it is referenced by the
driver struct which is not.  This causes a (somewhat unhelpful) section
mismatch warning:

  WARNING: drivers/watchdog/sp805_wdt.o(.data+0x4c): Section mismatch in
           reference from the variable sp805_wdt_driver to the (unknown
           reference) .init.data:(unknown)

Fix this by removing the annotation.

Signed-off-by: Nick Bowler <nbowler@elliptictech.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-12-26 15:14:31 +01:00
Linus Walleij
452190cb05 watchdog: move coh901327 state holders
The state holders used in the PM path of the drivers report as
unused variables when compiling without CONFIG_PM so let's
move them inside CONFIG_PM.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-12-26 15:14:24 +01:00
Jean-Christophe PLAGNIOL-VILLARD
c1c30a29df ARM: at91: make watchdog drivers soc independent
switch the watchdog drivers to resource and pass it via platform_device

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-11-28 22:50:39 +08:00
Dave Martin
17885b05b3 watchdog: sp805: Enable module alias autogeneration for AMBA drivers
Signed-off-by: Dave Martin <dave.martin@linaro.org>
2011-11-22 10:58:33 +00:00
Greg Kroah-Hartman
fe7484834b USB: convert some miscellanies drivers to use module_usb_driver()
This converts the remaining USB drivers in the kernel to use the
module_usb_driver() macro which makes the code smaller and a bit
simpler.

Added bonus is that it removes some unneeded kernel log messages about
drivers loading and/or unloading.

Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Till Harbaum <till@harbaum.org>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Chris Ball <cjb@laptop.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Lauro Ramos Venancio <lauro.venancio@openbossa.org>
Cc: Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Steve Glendinning <steve.glendinning@smsc.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jesper Juhl <jj@chaosbits.net>
Cc: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Cc: Jamie Iles <jamie@jamieiles.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18 09:52:10 -08:00
Dmitry Artamonow
20403e845f watchdog: fix initialisation printout in s3c2410_wdt
Looks like a typo creeped in, and driver prints
s3c2410-wdt s3c2410-wdt: watchdog active, reset abled, irq abled

instead of
s3c2410-wdt s3c2410-wdt: watchdog active, reset enabled, irq enabled

Also it may completely disinform about irq status, as it prints
"irq enabled" when S3C2410_WTCON_INTEN is in fact 0.

Fix it.

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Tested-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-11-16 22:04:17 +01:00
Mark Brown
f984910085 watchdog: Don't overwrite error value in wm831x_wdt_set_timeout()
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-11-16 22:00:10 +01:00
Wim Van Sebroeck
943ef2ec4f watchdog: adx_wdt.c: remove driver
Remove the driver (that was added in v2.6.32) since the architecture
has never been merged into mainline.

Reported-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-11-15 11:45:16 +01:00
Linus Torvalds
32aaeffbd4 Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
  Revert "tracing: Include module.h in define_trace.h"
  irq: don't put module.h into irq.h for tracking irqgen modules.
  bluetooth: macroize two small inlines to avoid module.h
  ip_vs.h: fix implicit use of module_get/module_put from module.h
  nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
  include: replace linux/module.h with "struct module" wherever possible
  include: convert various register fcns to macros to avoid include chaining
  crypto.h: remove unused crypto_tfm_alg_modname() inline
  uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
  pm_runtime.h: explicitly requires notifier.h
  linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
  miscdevice.h: fix up implicit use of lists and types
  stop_machine.h: fix implicit use of smp.h for smp_processor_id
  of: fix implicit use of errno.h in include/linux/of.h
  of_platform.h: delete needless include <linux/module.h>
  acpi: remove module.h include from platform/aclinux.h
  miscdevice.h: delete unnecessary inclusion of module.h
  device_cgroup.h: delete needless include <linux/module.h>
  net: sch_generic remove redundant use of <linux/module.h>
  net: inet_timewait_sock doesnt need <linux/module.h>
  ...

Fix up trivial conflicts (other header files, and  removal of the ab3550 mfd driver) in
 - drivers/media/dvb/frontends/dibx000_common.c
 - drivers/media/video/{mt9m111.c,ov6650.c}
 - drivers/mfd/ab3550-core.c
 - include/linux/dmaengine.h
2011-11-06 19:44:47 -08:00
Mark Brown
00411ee930 watchdog: Convert wm831x driver to watchdog core
Fairly large code churn but not much doing with that and the overall
result is a definite win.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-11-05 21:28:59 +01:00
Wolfram Sang
25dc46e383 watchdog: s3c2410: convert to use the watchdog framework
Make this driver a user of the watchdog framework and remove now
centrally handled parts. Tested on a mini2440.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-11-05 21:25:20 +01:00
Wim Van Sebroeck
deb9197b70 watchdog: iTCO_wdt.c - problems with newer hardware due to SMI clearing
Redhat Bugzilla: Bug 727875 - TCO_EN bit is disabled by TCO driver
Jiri Slaby: 28d41f53f broke temperature sensors on a ICH10 chipset

The iTCO_wdt driver disables the SMI. This breaks good working of newer hardware.
The disabling of the SMI by the TCO logic dates back from the i810-tco driver
from Nils Faerber (around 28 July 2000). The reason for this was that some BIOSes
install handlers reset or disable the watchdog timer instead of resetting the system.
The trick to fix this was to disable the SMI (by clearing the SMI_TCO_EN bit of the
SMI_EN register) to prevent this from happening.

This however has strange effects on newer hardware. So we are in a situation that
a fix for broken old hardware affects newer hardware.

The correct solution is to make this fix an option (with the new module parameter:
turn_SMI_watchdog_clear_off) so that the default behaviour is the unfixed version.

the next patch will be to move this in the start and stop functions of the driver
and to add a new module parameter for the global_smi_en bit and to get rid of the
vendor_support code.

This fix can have an effect on old (typical ICH & ICH2 chipsets) motherboards that
have a broken BIOS implementation concerning TCO logic. In these case the module
parameter turn_SMI_watchdog_clear_off=1 will need to be added.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-11-05 21:22:06 +01:00
Greg Lee
c63b6d02be watchdog: Add WDIOC_GETTIMELEFT ioctl support to w83627 watchdog driver
Add WDIOC_GETTIMELEFT ioctl allowing you to check how much time is left
on the watchdog counter before a reset occurs.

Signed-off-by: Greg Lee <glee [at] swspec.com>
Signed-off-by: Padraig Brady <P@draigbrady.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@google.com>
2011-11-05 21:16:39 +01:00
Yong Zhang
86b5912880 watchdog: irq: Remove IRQF_DISABLED
This flag is a NOOP and can be removed now.

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-11-05 21:16:15 +01:00
Venkat Subbiah
47bfd05813 watchdog: Octeon: Mark octeon_wdt interrupt as IRQF_NO_THREAD
This is to exclude it from force threading to allow RT patch set to work.

The watchdog timers are per-CPU and the addresses of register that reset
the timer are calculated based on the current CPU.  Therefore we cannot
allow it to run on a thread on a different CPU.  Also we only do a
single register write, which is much faster than scheduling a handler
thread.

And while on this line remove IRQF_DISABLED as this flag is a NOP.

Signed-off-by: Venkat Subbiah<venkat.subbiah@cavium.com>
Acked-by: David Daney<david.daney@cavium.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-11-05 21:15:38 +01:00
Sean Young
cef153a8d4 watchdog: sc520_wdt: Remove unnecessary cast.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-11-05 21:15:10 +01:00
Linus Torvalds
de0a5345a5 Merge branch 'for-linus' of git://github.com/richardweinberger/linux
* 'for-linus' of git://github.com/richardweinberger/linux: (90 commits)
  um: fix ubd cow size
  um: Fix kmalloc argument order in um/vdso/vma.c
  um: switch to use of drivers/Kconfig
  UserModeLinux-HOWTO.txt: fix a typo
  UserModeLinux-HOWTO.txt: remove ^H characters
  um: we need sys/user.h only on i386
  um: merge delay_{32,64}.c
  um: distribute exports to where exported stuff is defined
  um: kill system-um.h
  um: generic ftrace.h will do...
  um: segment.h is x86-only and needed only there
  um: asm/pda.h is not needed anymore
  um: hw_irq.h can go generic as well
  um: switch to generic-y
  um: clean Kconfig up a bit
  um: a couple of missing dependencies...
  um: kill useless argument of free_chan() and free_one_chan()
  um: unify ptrace_user.h
  um: unify KSTK_...
  um: fix gcov build breakage
  ...
2011-11-02 09:45:39 -07:00
Al Viro
3369465ed1 um: switch to use of drivers/Kconfig
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
2011-11-02 14:15:41 +01:00
Al Viro
d805a78603 um: clean Kconfig up a bit
* kill duplicates with drivers/char/Kconfig
* take watchdog one into drivers/watchdog/Kconfig
* take mmapper to arch/um/Kconfig.um
* rename Kconfig.char menu to "UML Character Devices"

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
2011-11-02 14:15:29 +01:00
Paul Gortmaker
e7455b7a20 watchdog: Add module.h to drivers/watchdog/stmp3xxx_wdt.c
This is a module and so needs module.h so that it will still build
once the implicit presence of module.h is removed.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:32:22 -04:00
Linus Torvalds
7115e3fcf4 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (121 commits)
  perf symbols: Increase symbol KSYM_NAME_LEN size
  perf hists browser: Refuse 'a' hotkey on non symbolic views
  perf ui browser: Use libslang to read keys
  perf tools: Fix tracing info recording
  perf hists browser: Elide DSO column when it is set to just one DSO, ditto for threads
  perf hists: Don't consider filtered entries when calculating column widths
  perf hists: Don't decay total_period for filtered entries
  perf hists browser: Honour symbol_conf.show_{nr_samples,total_period}
  perf hists browser: Do not exit on tab key with single event
  perf annotate browser: Don't change selection line when returning from callq
  perf tools: handle endianness of feature bitmap
  perf tools: Add prelink suggestion to dso update message
  perf script: Fix unknown feature comment
  perf hists browser: Apply the dso and thread filters when merging new batches
  perf hists: Move the dso and thread filters from hist_browser
  perf ui browser: Honour the xterm colors
  perf top tui: Give color hints just on the percentage, like on --stdio
  perf ui browser: Make the colors configurable and change the defaults
  perf tui: Remove unneeded call to newtCls on startup
  perf hists: Don't format the percentage on hist_entry__snprintf
  ...

Fix up conflicts in arch/x86/kernel/kprobes.c manually.

Ingo's tree did the insane "add volatile to const array", which just
doesn't make sense ("volatile const"?).  But we could remove the const
*and* make the array volatile to make doubly sure that gcc doesn't
optimize it away..

Also fix up kernel/trace/ring_buffer.c non-data-conflicts manually: the
reader_lock has been turned into a raw lock by the core locking merge,
and there was a new user of it introduced in this perf core merge.  Make
sure that new use also uses the raw accessor functions.
2011-10-26 17:03:38 +02:00
Linus Torvalds
8a9ea3237e Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1745 commits)
  dp83640: free packet queues on remove
  dp83640: use proper function to free transmit time stamping packets
  ipv6: Do not use routes from locally generated RAs
  |PATCH net-next] tg3: add tx_dropped counter
  be2net: don't create multiple RX/TX rings in multi channel mode
  be2net: don't create multiple TXQs in BE2
  be2net: refactor VF setup/teardown code into be_vf_setup/clear()
  be2net: add vlan/rx-mode/flow-control config to be_setup()
  net_sched: cls_flow: use skb_header_pointer()
  ipv4: avoid useless call of the function check_peer_pmtu
  TCP: remove TCP_DEBUG
  net: Fix driver name for mdio-gpio.c
  ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT
  rtnetlink: Add missing manual netlink notification in dev_change_net_namespaces
  ipv4: fix ipsec forward performance regression
  jme: fix irq storm after suspend/resume
  route: fix ICMP redirect validation
  net: hold sock reference while processing tx timestamps
  tcp: md5: add more const attributes
  Add ethtool -g support to virtio_net
  ...

Fix up conflicts in:
 - drivers/net/Kconfig:
	The split-up generated a trivial conflict with removal of a
	stale reference to Documentation/networking/net-modules.txt.
	Remove it from the new location instead.
 - fs/sysfs/dir.c:
	Fairly nasty conflicts with the sysfs rb-tree usage, conflicting
	with Eric Biederman's changes for tagged directories.
2011-10-25 13:25:22 +02:00
Linus Torvalds
59e5253417 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (59 commits)
  MAINTAINERS: linux-m32r is moderated for non-subscribers
  linux@lists.openrisc.net is moderated for non-subscribers
  Drop default from "DM365 codec select" choice
  parisc: Kconfig: cleanup Kernel page size default
  Kconfig: remove redundant CONFIG_ prefix on two symbols
  cris: remove arch/cris/arch-v32/lib/nand_init.S
  microblaze: add missing CONFIG_ prefixes
  h8300: drop puzzling Kconfig dependencies
  MAINTAINERS: microblaze-uclinux@itee.uq.edu.au is moderated for non-subscribers
  tty: drop superfluous dependency in Kconfig
  ARM: mxc: fix Kconfig typo 'i.MX51'
  Fix file references in Kconfig files
  aic7xxx: fix Kconfig references to READMEs
  Fix file references in drivers/ide/
  thinkpad_acpi: Fix printk typo 'bluestooth'
  bcmring: drop commented out line in Kconfig
  btmrvl_sdio: fix typo 'btmrvl_sdio_sd6888'
  doc: raw1394: Trivial typo fix
  CIFS: Don't free volume_info->UNC until we are entirely done with it.
  treewide: Correct spelling of successfully in comments
  ...
2011-10-25 12:11:02 +02:00
Ingo Molnar
d48b0e1737 x86, nmi, drivers: Fix nmi splitup build bug
nmi.c needs an #include <linux/mca.h>:

 arch/x86/kernel/nmi.c: In function ‘unknown_nmi_error’:
 arch/x86/kernel/nmi.c:286:6: error: ‘MCA_bus’ undeclared (first use in this function)
 arch/x86/kernel/nmi.c:286:6: note: each undeclared identifier is reported only once for each function it appears in

Another one is the hpwdt driver:

 drivers/watchdog/hpwdt.c:507:9: error: ‘NMI_DONE’ undeclared (first use in this function)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-10 06:57:21 +02:00
Don Zickus
9c48f1c629 x86, nmi: Wire up NMI handlers to new routines
Just convert all the files that have an nmi handler to the new routines.
Most of it is straight forward conversion.  A couple of places needed some
tweaking like kgdb which separates the debug notifier from the nmi handler
and mce removes a call to notify_die.

[Thanks to Ying for finding out the history behind that mce call

https://lkml.org/lkml/2010/5/27/114

And Boris responding that he would like to remove that call because of it

https://lkml.org/lkml/2011/9/21/163]

The things that get converted are the registeration/unregistration routines
and the nmi handler itself has its args changed along with code removal
to check which list it is on (most are on one NMI list except for kgdb
which has both an NMI routine and an NMI Unknown routine).

Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Corey Minyard <minyard@acm.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: Jack Steiner <steiner@sgi.com>
Link: http://lkml.kernel.org/r/1317409584-23662-4-git-send-email-dzickus@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-10 06:56:57 +02:00
Paul Bolle
395cf9691d doc: fix broken references
There are numerous broken references to Documentation files (in other
Documentation files, in comments, etc.). These broken references are
caused by typo's in the references, and by renames or removals of the
Documentation files. Some broken references are simply odd.

Fix these broken references, sometimes by dropping the irrelevant text
they were part of.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-27 18:08:04 +02:00
David S. Miller
8decf86879 Merge branch 'master' of github.com:davem330/net
Conflicts:
	MAINTAINERS
	drivers/net/Kconfig
	drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
	drivers/net/ethernet/broadcom/tg3.c
	drivers/net/wireless/iwlwifi/iwl-pci.c
	drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c
	drivers/net/wireless/rt2x00/rt2800usb.c
	drivers/net/wireless/wl12xx/main.c
2011-09-22 03:23:13 -04:00
Andi Kleen
4e8858d513 watchdog: Initconst section fixes for watchdog
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-09-20 14:32:00 +02:00
John Crispin
9cfce47b14 watchdog: lantiq: fix watchdogs timeout handling
The enable function was using the global timeout variable for local operations.
This resulted in the value of the global variable being corrupted, thus
breaking the code.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: linux-watchdog@vger.kernel.org
Cc: linux-mips@linux-mips.org
2011-09-20 14:28:24 +02:00
Naga Chumbalkar
dbc018eca3 watchdog: hpwdt: prevent multiple "NMI occurred" messages
On platforms with no iCRU support don't print two, (possibly conflicting),
"NMI occurred" messages when the firmware is unable to source the NMI.

Please note that one of the enhancements to the v1.3.0 hpwdt driver is to panic and allow
KDUMP to succeed even on NMIs that are unknown to the platform firmware.

Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Reviewed-by: Thomas Mingarelli <thomas.mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-09-20 14:24:54 +02:00
H Hartley Sweeten
cb7efc02c6 watchdog: WatchDog Timer Driver Core - use passed watchdog_device
Use the passed watchdog_device instead of the static global variable when
testing and setting the status in watchdog_ping, watchdog_start, and
watchdog_stop.  Note that the callers of these functions are actually
passing the static global variable.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-09-20 14:22:28 +02:00
John W. Linville
b38d355eaa Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
Conflicts:
	drivers/staging/ath6kl/miscdrv/ar3kps/ar3kpsparser.c
	drivers/staging/ath6kl/os/linux/ar6000_drv.c
2011-08-22 14:28:50 -04:00
Hauke Mehrtens
c1d1c5d421 bcm47xx: add support for bcma bus
This patch add support for the bcma bus. Broadcom uses only Mips 74K
CPUs on the new SoC and on the old ons using ssb bus there are no Mips
74K CPUs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08 14:29:32 -04:00
Hauke Mehrtens
a656ffcbc7 bcm47xx: make it possible to build bcm47xx without ssb.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08 14:29:31 -04:00
Hauke Mehrtens
08ccf57283 bcm47xx: prepare to support different buses
Prepare bcm47xx to support different System buses. Before adding
support for bcma it should be possible to build bcm47xx without the
need of ssb. With this patch bcm47xx does not directly contain a
ssb_bus, but a union contain all the supported system buses. As a SoC
just uses one system bus a union is a good choice.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08 14:29:30 -04:00
Josh Boyer
7abdd34dbf watchdog: Cleanup WATCHDOG_CORE help text
The newly added WATCHDOG_CORE option is a bool, but the help text suggests
it can be built as a module.  Fix it up.

Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-08-02 08:23:07 +00:00
Mart Gerrits
6b01d30eef watchdog: Fix POST failure on ASUS P5N32-E SLI and similar boards
At present the module does not unset the NO_REBOOT bit upon shutdown, this
causes the BIOS to fail the POST once and reset. During the next boot it
displays the following error message:

***** Warning: System BOOT Fail *****
Your system last boot fail or POST interrupted.
Please enter setup to load default and reboot again.
Press F1 to continue, DEL to enter SETUP

With this patch the NO_REBOOT flag will be unset on shutdown and thus stop
this failure from occurring.

Tested on 'ASUS P5N32-E SLI with BIOS revision 1801' and
          'ASUS P5N32-E SLI PLUS with BIOS revision 1502'.

Signed-off-by: Mart Gerrits <mart1987@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-08-02 08:22:54 +00:00
David Engraf
bea1906620 watchdog: shwdt: fix usage of mod_timer
Fix the usage of mod_timer() and make the driver usable. mod_timer() must
be called with an absolute timeout in jiffies. The old implementation
used a relative timeout thus the hardware watchdog was never triggered.

Signed-off-by: David Engraf <david.engraf@sysgo.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Wim Van sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: stable <stable@kernel.org>
2011-08-02 08:22:49 +00:00
Linus Torvalds
2313bcdcc9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-watchdog
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-watchdog: (25 commits)
  watchdog: WatchDog Timer Driver Core - Add minimum and max timeout
  watchdog: WatchDog Timer Driver Core - Add ioctl call
  watchdog: WatchDog Timer Driver Core - Add nowayout feature
  watchdog: WatchDog Timer Driver Core - Add Magic Close feature
  watchdog: WatchDog Timer Driver Core - Add WDIOC_SETTIMEOUT and WDIOC_GETTIMEOUT ioctl
  watchdog: WatchDog Timer Driver Core - Add WDIOC_SETOPTIONS ioctl
  watchdog: WatchDog Timer Driver Core - Add WDIOC_KEEPALIVE ioctl
  watchdog: WatchDog Timer Driver Core - Add basic ioctl functionality
  watchdog: WatchDog Timer Driver Core - Add basic framework
  watchdog: hpwdt: add next gen HP servers
  watchdog: it8712f_wdt.c: improve includes
  watchdog: at91sam9/wdt: move register header to drivers
  watchdog: Add Xilinx watchdog timer driver
  watchdog: remove empty pm-functions
  watchdog: sp805: Flush posted writes in enable/disable.
  watchdog: sp805: Don't write 0 to the load value register.
  watchdog: imx2_wdt: add device tree probe support
  watchdog: s3c2410: Add support for device tree based probe
  watchdog: mpcore_wdt: Add suspend/resume support.
  watchdog: mtx1-wdt: use dev_{err,info} instead of printk()
  ...
2011-07-29 23:28:47 -07:00
Wim Van Sebroeck
3f43f68e29 watchdog: WatchDog Timer Driver Core - Add minimum and max timeout
Add min_timeout (minimum timeout) and max_timeout
values so that the framework can check if the new
timeout value is between the minimum and maximum
timeout values. If both values are 0, then the
framework will leave the check for the watchdog
device driver itself.

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2011-07-28 08:01:18 +00:00
Wim Van Sebroeck
78d88fc012 watchdog: WatchDog Timer Driver Core - Add ioctl call
Add support for extra ioctl calls by adding a
ioctl watchdog operation. This operation will be
called before we do our own handling of ioctl
commands. This way we can override the internal
ioctl command handling and we can also add
extra ioctl commands. The ioctl watchdog operation
should return the appropriate error codes or
-ENOIOCTLCMD if the ioctl command should be handled
through the internal ioctl handling of the framework.

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2011-07-28 08:01:16 +00:00
Wim Van Sebroeck
7e192b9c42 watchdog: WatchDog Timer Driver Core - Add nowayout feature
Add support for the nowayout feature to the
WatchDog Timer Driver Core framework.
This feature prevents the watchdog timer from being
stopped.

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2011-07-28 08:01:14 +00:00
Wim Van Sebroeck
017cf08051 watchdog: WatchDog Timer Driver Core - Add Magic Close feature
Add support for the Magic Close feature to the
WatchDog Timer Driver Core framework.

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2011-07-28 08:01:12 +00:00
Wim Van Sebroeck
014d694e5d watchdog: WatchDog Timer Driver Core - Add WDIOC_SETTIMEOUT and WDIOC_GETTIMEOUT ioctl
This part add's the WDIOC_SETTIMEOUT and WDIOC_GETTIMEOUT ioctl
functionality to the WatchDog Timer Driver Core framework.

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2011-07-28 08:01:11 +00:00
Wim Van Sebroeck
234445b4e4 watchdog: WatchDog Timer Driver Core - Add WDIOC_SETOPTIONS ioctl
This part add's the WDIOC_SETOPTIONS ioctl functionality
to the WatchDog Timer Driver Core framework.

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2011-07-28 08:01:09 +00:00
Wim Van Sebroeck
c2dc00e494 watchdog: WatchDog Timer Driver Core - Add WDIOC_KEEPALIVE ioctl
This part add's the WDIOC_KEEPALIVE ioctl functionality to the
WatchDog Timer Driver Core framework. Please note that the
WDIOF_KEEPALIVEPING bit has to be set in the watchdog_info
options field.

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2011-07-28 08:01:07 +00:00
Wim Van Sebroeck
2fa03560ab watchdog: WatchDog Timer Driver Core - Add basic ioctl functionality
This part add's the basic ioctl functionality to the
WatchDog Timer Driver Core framework. The supported
ioctl call's are:
	WDIOC_GETSUPPORT
	WDIOC_GETSTATUS
	WDIOC_GETBOOTSTATUS

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2011-07-28 08:01:05 +00:00
Wim Van Sebroeck
43316044d4 watchdog: WatchDog Timer Driver Core - Add basic framework
The WatchDog Timer Driver Core is a framework
that contains the common code for all watchdog-driver's.
It also introduces a watchdog device structure and the
operations that go with it.

This is the introduction of this framework. This part
supports the minimal watchdog userspace API (or with
other words: the functionality to use /dev/watchdog's
open, release and write functionality as defined in
the simplest watchdog API). Extra functionality will
follow in the next set of patches.

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2011-07-28 08:01:04 +00:00
Thomas Mingarelli
5efc7a6222 watchdog: hpwdt: add next gen HP servers
This patch is required to enable hpwdt to work on next generation HP servers
with iLO.

Signed-off-by: Thomas Mingarelli <thomas.mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-07-28 08:00:56 +00:00
Arun Sharma
60063497a9 atomic: use <linux/atomic.h>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>

Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:47 -07:00
Wim Van Sebroeck
2260286886 watchdog: it8712f_wdt.c: improve includes
remove unneeded pci.h include.
and include ioport.h to avoid build errors for the region functions.

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-07-26 21:28:23 +00:00
Jean-Christophe Plagniol-Villard
e7b39145b5 watchdog: at91sam9/wdt: move register header to drivers
move register header to drivers

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-07-26 21:22:15 +00:00
Alejandro Cabrera
e9659e69b0 watchdog: Add Xilinx watchdog timer driver
Watchdog timer device driver for Xilinx xps_timebase_wdt compatible ip cores.
It takes watchdog timer configuration from device tree and it needs that its
parent has defined the property "clock-frecuency".
It is compatible with watchdog timer kernel API, so user apps like watchdogd
may talk with it.

Signed-off-by: Alejandro Cabrera <aldaya@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-07-26 21:21:29 +00:00
Wolfram Sang
2fc5d52b21 watchdog: remove empty pm-functions
While checking what watchdog drivers usually do in suspend/resume to
spot common behaviour for the watchdog framework, I found these drivers
which do nothing but add some cruft. Remove it, it is superfluous. New
approaches should probably be done with pm_ops anyway.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-07-26 21:21:16 +00:00
Nick Bowler
081d83a339 watchdog: sp805: Flush posted writes in enable/disable.
There are no reads in these functions, so if MMIO writes are posted,
the writes in enable/disable may not have completed by the time these
functions return.  If the functions run from different CPUs, it's
in theory possible for the writes to be interleaved, which would be
disastrous for this driver.

At the very least, we need an mmiowb() before releasing the lock, but
since it seems desirable for the watchdog timer to be actually stopped
or reset when these functions return, read the lock register to force
the writes out.

Signed-off-by: Nick Bowler <nbowler@elliptictech.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-07-26 21:19:56 +00:00
Nick Bowler
da3e515024 watchdog: sp805: Don't write 0 to the load value register.
At least on the Versatile Express' V2M, calling wdt_disable followed by
wdt_enable, for instance by running the following sequence:

  echo V > /dev/watchdog; echo V > /dev/watchdog

results in an immediate reset.  The wdt_disable function writes 0 to the
load register; while the watchdog interrupts are disabled at this point,
this special value is defined to trigger an interrupt immediately.  It
appears that in this instance, the reset happens when the interrupts
are subsequently enabled by wdt_enable.

Putting in a short delay after writing a new load value in wdt_enable
solves the issue, but it seems cleaner to simply never write 0 to the
load register at all: according to the hardware docs, writing 0 to the
control register suffices to stop the counter, and the write of 0 to
the load register is questionable anyway since this register resets to
0xffffffff.

Signed-off-by: Nick Bowler <nbowler@elliptictech.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-07-26 21:19:43 +00:00
Shawn Guo
f5a427eede watchdog: imx2_wdt: add device tree probe support
Adds device tree probe support for imx2_wdt driver.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-07-26 21:19:16 +00:00
Thomas Abraham
9487a9cc71 watchdog: s3c2410: Add support for device tree based probe
This patch adds the of_match_table to enable s3c2410-wdt driver
to be probed when watchdog device node is found in the device tree.

Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-07-22 09:00:43 +00:00
Peter Fordham
641e4f4495 watchdog: mpcore_wdt: Add suspend/resume support.
Add support for suspend and resume to the MPCore watchdog driver.

Signed-off-by: Peter Fordham <peter.fordham@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-07-22 09:00:20 +00:00
Florian Fainelli
fad0a9dd0d watchdog: mtx1-wdt: use dev_{err,info} instead of printk()
use dev_{err,info} instead of printk(KERN_{ERR,INFO} ...)

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-07-22 08:59:43 +00:00
Sascha Hauer
bfbc5e272d watchdog: i.MX: use IMX_HAVE_PLATFORM_IMX2_WDT to depend on
The i.MX architecture provides IMX_HAVE_PLATFORM_* macros to signal
that a selected SoC supports a certain hardware. Use them instead of
depending on ARCH_* directly.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: linux-watchdog@vger.kernel.org
2011-07-22 08:58:38 +00:00
Jamie Iles
c9353ae1c6 watchdog: add support for the Synopsys DesignWare WDT
The Synopsys DesignWare watchdog is found in several ARM based systems
and provides a choice of 16 timeout periods depending on the clock
input.  The watchdog cannot be disabled once started.

Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Acked-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-07-22 08:57:38 +00:00
Jonathan McDowell
7ccdb9467b watchdog: pc87413_wdt: Cleanup pc87413 watchdog driver to use
Inspired by Nat Gurumoorthy's recent patches for cleaning up the it87
drivers to use request_muxed_region for accessing the SuperIO area on
these chips, and the fact I have a GPIO driver for the pc8741x basically
ready for submission, here is a patch to cleanup the pc87413 watchdog
driver to use request_muxed_region for accessing the SuperIO area.

It also pulls out the details about the SWC IO area on initial driver
load, and properly does a request_region for that area - there's no
requirement to touch the SuperIO area after doing the initial watchdog
enable and IO base retrieval.

While I have hardware with a pc87413 on it it is not wired in a way that
allows the watchdog to reboot the machine, so I have not been able to
fully test these changes - I have checked that the driver correctly
initialises itself still and requests the SWC io region ok.

Signed-Off-By: Jonathan McDowell <noodles@earth.li>
Signed-Off-By: Wim Van Sebroeck <wim@iguana.be>
2011-07-22 08:56:41 +00:00
Wim Van Sebroeck
97b08a6221 watchdog: iTCO_wdt: clean-up PCI device ID's
Clean up of the iTCO_wdt PCI device ID's.
Own macro is replaced by the PCI_VDEVICE macro.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-07-22 08:56:11 +00:00
Nat Gurumoorthy
a134b82560 watchdog: Use "request_muxed_region" in it87 watchdog drivers
Changes the it87 watchdog drivers to use "request_muxed_region".
Serialize access to the hardware by using "request_muxed_region" macro defined
by Alan Cox. Call to this macro will hold off the requestor if the resource is
currently busy. 

The use of the above macro makes it possible to get rid of
spinlocks in it8712f_wdt.c and it87_wdt.c watchdog drivers.
This also greatly simplifies the implementation of it87_wdt.c driver.

 "superio_enter" will return an error if call to "request_muxed_region" fails. 
Rest of the code change is to ripple an error return from superio_enter to
the top level.

Signed-off-by: Nat Gurumoorthy <natg@google.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-07-22 08:55:23 +00:00
Randy Dunlap
f71d26bb65 watchdog: hpwdt depends on PCI
hpwdt is a PCI driver so it should depend on PCI.
Fixes these build errors:

drivers/watchdog/hpwdt.c:762: error: implicit declaration of function 'pci_iomap'
drivers/watchdog/hpwdt.c:762: warning: assignment makes pointer from integer without a cast
drivers/watchdog/hpwdt.c:797: error: implicit declaration of function 'pci_iounmap'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: Thomas Mingarelli <thomas.mingarelli@hp.com>
2011-07-17 12:40:08 +00:00
Olaf Hering
2a75ca4a43 watchdog: fix hpwdt Kconfig regression in 3.0-rc
Remove Kconfig regression caused by commit
a4616153de "watchdog: hpwdt: build hpwdt as
module by default with NMI_DECODING enabled"

With the above change applied, hpwdt will be enabled unconditionally by just
entering the Watchdog subscreen in menuconfig. Since this driver is not
essential to boot any box it should remain disabled until it gets manually
enabled, just like all other drivers.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Tony Camuso <tcamuso@redhat.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2011-07-16 06:06:12 +00:00
Hans-Christian Egtvedt
aeb0aea143 watchdog: update author email for at32ap700x_wdt
This patch updates the email address of the at32ap700x_wdt driver supported by
me to an email account I will use on a more regular basis in the future.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-06-28 20:01:25 +00:00
Axel Lin
ae2a006074 watchdog: gef_wdt: fix MODULE_ALIAS
Remove the space between "platform:" prefix and the driver name.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-06-28 07:43:00 +00:00
Jesper Juhl
e376fd664b watchdog: Intel SCU Watchdog: Fix build and remove duplicate code
Trying to build the Intel SCU Watchdog fails for me with gcc 4.6.0 -
$ gcc --version | head -n 1
gcc (GCC) 4.6.0 20110513 (prerelease)

like this :
  CC      drivers/watchdog/intel_scu_watchdog.o
In file included from drivers/watchdog/intel_scu_watchdog.c:49:0:
/home/jj/src/linux-2.6/arch/x86/include/asm/apb_timer.h: In function ‘apbt_time_init’:
/home/jj/src/linux-2.6/arch/x86/include/asm/apb_timer.h:65:42: warning: ‘return’ with a value, in function returning void [enabled by default]
drivers/watchdog/intel_scu_watchdog.c: In function ‘intel_scu_watchdog_init’:
drivers/watchdog/intel_scu_watchdog.c:468:2: error: implicit declaration of function ‘sfi_get_mtmr’ [-Werror=implicit-function-declaration]
drivers/watchdog/intel_scu_watchdog.c:468:32: warning: assignment makes pointer from integer without a cast [enabled by default]
cc1: some warnings being treated as errors

make[1]: *** [drivers/watchdog/intel_scu_watchdog.o] Error 1
make: *** [drivers/watchdog/intel_scu_watchdog.o] Error 2

Additionally, linux/types.h is needlessly being included twice in 
drivers/watchdog/intel_scu_watchdog.c

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-06-28 07:42:50 +00:00
Florian Fainelli
db98f89a28 watchdog: mtx1-wdt: fix section mismatch
Fix section mismatch and remove unused variable 'tmp'.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-06-28 07:42:40 +00:00
Florian Fainelli
2ea4e76e99 watchdog: mtx1-wdt: fix GPIO toggling
Commit e391be76 (MIPS: Alchemy: Clean up GPIO registers and accessors)
changed the way the GPIO was toggled. Prior to this patch, we would
always actively drive the GPIO output to either 0 or 1, this patch
drove the GPIO active to 0, and put the GPIO in tristate to drive it
to 1, unfortunately this does not work, revert back to active driving.

Using a signed variable (gstate) to hold the gpio state and using a bit-
wise operation on it also resulted in toggling value from 1 to -2 since
the variable is signed. This value was then passed on to gpio_direction_
output, which always perform a if (value) ... to set the value to the
gpio, so we were always writing a 1 to this GPIO instead of 1 -> 0 -> 1 ...

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: stable <stable@kernel.org>
2011-06-28 07:42:30 +00:00
Florian Fainelli
9b19d40aa3 watchdog: mtx1-wdt: request gpio before using it
Otherwise, the gpiolib autorequest feature will produce a WARN_ON():

WARNING: at drivers/gpio/gpiolib.c:101 0x8020ec6c()
autorequest GPIO-215
[...]

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: stable <stable@kernel.org>
2011-06-28 07:42:23 +00:00
Mark Brown
076bad7c4d watchdog: Handle multiple wm831x watchdogs being registered
Due to the whole single instance based watchdog API we use static data
for the wm831x watchdog which means that if the system tries to register
a second one we end up trying to register the same miscdevice again,
corrupting the miscdevice list. Work around this by checking for duplicate
registrations until we get a watchdog core.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-06-28 07:42:16 +00:00
Samuel Ortiz
9abd768a8d mfd: Use mfd cell platform_data for rdc321x cells platform bits
With the addition of a platform device mfd_cell pointer, MFD drivers
can go back to passing platform data back to their sub drivers.
This allows for an mfd_cell->mfd_data removal and thus keep the
sub drivers MFD agnostic. This is mostly needed for non MFD aware
sub drivers.

Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26 19:45:06 +02:00
Linus Torvalds
57d19e80f4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  b43: fix comment typo reqest -> request
  Haavard Skinnemoen has left Atmel
  cris: typo in mach-fs Makefile
  Kconfig: fix copy/paste-ism for dell-wmi-aio driver
  doc: timers-howto: fix a typo ("unsgined")
  perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c
  md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course').
  treewide: fix a few typos in comments
  regulator: change debug statement be consistent with the style of the rest
  Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations"
  audit: acquire creds selectively to reduce atomic op overhead
  rtlwifi: don't touch with treewide double semicolon removal
  treewide: cleanup continuations and remove logging message whitespace
  ath9k_hw: don't touch with treewide double semicolon removal
  include/linux/leds-regulator.h: fix syntax in example code
  tty: fix typo in descripton of tty_termios_encode_baud_rate
  xtensa: remove obsolete BKL kernel option from defconfig
  m68k: fix comment typo 'occcured'
  arch:Kconfig.locks Remove unused config option.
  treewide: remove extra semicolons
  ...
2011-05-23 09:12:26 -07:00
Manuel Lauss
b7f720d68c MIPS: Alchemy: Clean up GPIO registers and accessors
remove au_readl/au_writel, remove the predefined GPIO1/2 KSEG1 register
addresses and fix the fallout in all boards and drivers.

This also fixes a bug in the mtx-1_wdt driver which was introduced by
commit 6ea8115bb6
("Convert mtx1 wdt to be a platform device and use generic GPIO API")
before this patch mtx-1_wdt only modified GPIO215, the patch then
used the gpio resource information as bit index into the GPIO2 register
but the conversion to the GPIO API didn't realize that.
With this patch the drivers original behaviour is restored and GPIO15
is left alone.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Cc: Florian Fainelli <florian@openwrt.org>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: linux-watchdog@vger.kernel.org
Cc: Wim Van Sebroeck <wim@iguana.be>
Patchwork: https://patchwork.linux-mips.org/patch/2381/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org
2011-05-19 09:55:46 +01:00
John Crispin
2f58b8d04e MIPS: Lantiq: Add watchdog support
This patch adds the driver for the watchdog found inside the Lantiq SoC family.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: linux-mips@linux-mips.org
Cc: linux-watchdog@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2327/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:43 +01:00
Grant Likely
b1608d69cb drivercore: revert addition of of_match to struct device
Commit b826291c, "drivercore/dt: add a match table pointer to struct
device" added an of_match pointer to struct device to cache the
of_match_table entry discovered at driver match time.  This was unsafe
because matching is not an atomic operation with probing a driver.  If
two or more drivers are attempted to be matched to a driver at the
same time, then the cached matching entry pointer could get
overwritten.

This patch reverts the of_match cache pointer and reworks all users to
call of_match_device() directly instead.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-18 12:32:23 -06:00
Seth Heasley
aa1f465225 watchdog: iTCO_wdt: TCO Watchdog patch for Intel Panther Point PCH
This patch adds the TCO Watchdog DeviceIDs for the Intel Panther Point PCH.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-04-26 12:50:44 +00:00
Jiri Kosina
07f9479a40 Merge branch 'master' into for-next
Fast-forwarded to current state of Linus' tree as there are patches to be
applied for files that didn't exist on the old branch.
2011-04-26 10:22:59 +02:00
Joe Perches
06794eaeb7 treewide: Fix iomap resource size miscalculations
Convert off-by-1 r->end - r->start to resource_size(r)

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: David Brown <davidb@codeaurora.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Acked-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-10 17:01:04 +02:00
Peter Korsgaard
d856b41846 watchdog: mpc8xxx_wdt: fix build
Since 1c48a5c93d (dt: Eliminate of_platform_{,un}register_driver)
mpc8xxx_wdt no longer builds as it tries to refer to a 'match' variable
rather than ofdev->dev.of_match that it checks just before.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-04-07 20:20:24 +00:00
Lucas De Marchi
25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Anithra P Janakiraman
7fff4beb31 watchdog: softdog.c: enhancement to optionally invoke panic instead of reboot on timer expiry
This is needed for determining the reason for failure when a softdog
timeout occurs.

We use softdog to watch for critical application failures and at the
minimum a snapshot of the system would help to determine the cause.  In
such a scenario the application could fail but there isn't a softlockup as
such, hence the detect softlockup feature does not help.

The patch adds a module parameter soft_panic which when set to 1 causes
softdog to invoke panic instead of reboot when the softdog timer expires. 
By invoking panic we execute kdump if it is configured and the vmcore
generated by kdump should provide atleast a minimal idea of the reason for
failure.

Based on an original patch by Ken Sugawara <sugaken.r3@gmail.com>
Signed-off-by: Anithra P J <anithra@linux.vnet.ibm.com>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2011-03-29 11:56:22 +00:00
Randy Dunlap
708d42472f watchdog: fix nv_tco section mismatch
Fix section mismatch warning:
Mark the called nv_tco_getdevice() as __devinit, just like its caller.

WARNING: drivers/watchdog/nv_tco.o(.devinit.text+0x16): Section mismatch in reference from the function nv_tco_init() to the function .init.text:nv_tco_getdevice()
The function __devinit nv_tco_init() references
a function __init nv_tco_getdevice().
If nv_tco_getdevice is only used by nv_tco_init then
annotate nv_tco_getdevice with a matching annotation.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-29 11:06:04 +00:00
Yinghai Lu
90d241edd1 watchdog: sp5100_tco.c: Check if firmware has set correct value in tcobase.
Stefano found SP5100 TCO watchdog driver using wrong address.

[    9.148536] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[    9.148628] DEBUG __ioremap_caller WARNING address=b8fe00 size=8 valid=1 reserved=1

and e820 said that range is RAM.

We should check if we can use that reading out. BIOS could just program wrong address there.

Reported-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by:Yinghai Lu <yinghai@kernel.org>
Acked-by: Mike Waychison <mikew@google.com>
Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: stable <stable@kernel.org>
2011-03-29 11:05:57 +00:00
Julia Lawall
f712eacf02 watchdog: Convert release_resource to release_region/release_mem_region
Request_mem_region should be used with release_mem_region, not
release_resource.

In pnx4008_wdt.c, a missing clk_put is added as well.

The semantic match that finds the first problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression x,E;
@@
*x = request_mem_region(...)
... when != release_mem_region(x)
    when != x = E
* release_resource(x);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: stable <stable@kernel.org>
2011-03-29 11:05:48 +00:00
Julia Lawall
f72401e94d watchdog: s3c2410_wdt.c: Convert release_resource to release_region/release_mem_region
Request_mem_region should be used with release_mem_region, not
release_resource.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression x,E;
@@
*x = request_mem_region(...)
... when != release_mem_region(x)
    when != x = E
* release_resource(x);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: stable <stable@kernel.org>
2011-03-29 11:05:28 +00:00
Andres Salomon
46673ed2cd rdc321x-southbridge: Use mfd_data instead of driver_data
Use mfd_data for passing information from mfd drivers to soc
clients.  The mfd_cell's driver_data field is being phased out.

Clients that were using driver_data now access .mfd_data
via mfd_get_data().

Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23 10:41:57 +01:00
Linus Torvalds
e16b396ce3 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (47 commits)
  doc: CONFIG_UNEVICTABLE_LRU doesn't exist anymore
  Update cpuset info & webiste for cgroups
  dcdbas: force SMI to happen when expected
  arch/arm/Kconfig: remove one to many l's in the word.
  asm-generic/user.h: Fix spelling in comment
  drm: fix printk typo 'sracth'
  Remove one to many n's in a word
  Documentation/filesystems/romfs.txt: fixing link to genromfs
  drivers:scsi Change printk typo initate -> initiate
  serial, pch uart: Remove duplicate inclusion of linux/pci.h header
  fs/eventpoll.c: fix spelling
  mm: Fix out-of-date comments which refers non-existent functions
  drm: Fix printk typo 'failled'
  coh901318.c: Change initate to initiate.
  mbox-db5500.c Change initate to initiate.
  edac: correct i82975x error-info reported
  edac: correct i82975x mci initialisation
  edac: correct commented info
  fs: update comments to point correct document
  target: remove duplicate include of target/target_core_device.h from drivers/target/target_core_hba.c
  ...

Trivial conflict in fs/eventpoll.c (spelling vs addition)
2011-03-18 10:37:40 -07:00
Linus Torvalds
0df0914d41 Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits)
  omap: zoom: host should not pull up wl1271's irq line
  arm: plat-omap: iommu: fix request_mem_region() error path
  OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430
  omap4: mux: Remove duplicate mux modes
  omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag
  omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set
  omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected
  omap4: board-omap4panda: Initialise the serial pads
  omap3: board-3430sdp: Initialise the serial pads
  omap4: board-4430sdp: Initialise the serial pads
  omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init
  omap2+: mux: Remove the use of IDLE flag
  omap2+: Add separate list for dynamic pads to mux
  perf: add OMAP support for the new power events
  OMAP4: Add IVA OPP enteries.
  OMAP4: Update Voltage Rail Values for MPU, IVA and CORE
  OMAP4: Enable 800 MHz and 1 GHz MPU-OPP
  OMAP3+: OPP: Replace voltage values with Macros
  OMAP3: wdtimer: Fix CORE idle transition
  Watchdog: omap_wdt: add fine grain runtime-pm
  ...

Fix up various conflicts in
 - arch/arm/mach-omap2/board-omap3evm.c
 - arch/arm/mach-omap2/clock3xxx_data.c
 - arch/arm/mach-omap2/usb-musb.c
 - arch/arm/plat-omap/include/plat/usb.h
 - drivers/usb/musb/musb_core.h
2011-03-17 19:28:15 -07:00
Linus Torvalds
6d7ed21d17 Merge branches 'defcfg', 'drivers' and 'cyberpro-next' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'defcfg' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6647/1: add Versatile Express defconfig
  ARM: 6644/1: mach-ux500: update the U8500 defconfig

* 'drivers' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6764/1: pl011: factor out FIFO to TTY code
  ARM: 6763/1: pl011: add optional RX DMA to PL011 v2
  ARM: 6758/1: amba: support pm ops
  ARM: amba: make amba_driver id_table const
  ARM: amba: make internal ID table handling const
  ARM: amba: make probe() functions take const id tables
  ARM: 6662/1: amba: make amba_bustype non-static
  ARM: mmci: add dmaengine-based DMA support
  ARM: mmci: no need for separate host->data_xfered
  ARM: mmci: avoid unnecessary switch to data available PIO interrupts
  ARM: mmci: no need to call flush_dcache_page() with sg_miter API
  ARM: mmci: avoid reporting too many completed bytes on fifo overrun
  ALSA: AACI: make fifo variables more explanitory
  ALSA: AACI: no need to call snd_pcm_period_elapsed() for each period
  ALSA: AACI: use snd_pcm_lib_period_bytes()
  ALSA: AACI: clean up AACI announcement printk
  ALSA: AACI: fix channel mask selection
  ALSA: AACI: fix number of channels for record
  ALSA: AACI: fix multiple IRQ claiming

* 'cyberpro-next' of master.kernel.org:/home/rmk/linux-2.6-arm:
  VIDEO: cyberpro: remove unused cyber2000fb_get_fb_var()
  VIDEO: cyberpro: remove useless function extreg pointers
  VIDEO: cyberpro: update handling of device structures
  VIDEO: cyberpro: add support for video capture I2C
  VIDEO: cyberpro: make 'reg_b0_lock' always present
  VIDEO: cyberpro: add I2C support
  VIDEO: cyberpro: select lowest multipler/divisor for PLL
2011-03-17 18:48:35 -07:00
Linus Torvalds
4b0e976c66 Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  watchdog: booke_wdt: clean up status messages
  watchdog: cleanup spaces before tabs
  watchdog: convert to DEFINE_PCI_DEVICE_TABLE
  watchdog: Xen watchdog driver
  watchdog: Intel SCU Watchdog Timer Driver for Moorestown and Medfield platforms.
  watchdog: jz4740_wdt - fix magic character checking
  watchdog: add JZ4740 watchdog driver
  watchdog: it87_wdt: Add support for IT8721F watchdog
  watchdog: hpwdt: build hpwdt as module by default with NMI_DECODING enabled
  watchdog: hpwdt: Fix a couple of typos
2011-03-17 17:09:29 -07:00
Paul Mundt
1d2a1959fe Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into sh-latest 2011-03-17 16:44:08 +09:00
Linus Torvalds
4c5811bf46 Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6
* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6: (21 commits)
  tty: serial: altera_jtaguart: Add device tree support
  tty: serial: altera_uart: Add devicetree support
  dt: eliminate of_platform_driver shim code
  dt: Eliminate of_platform_{,un}register_driver
  dt/serial: Eliminate users of of_platform_{,un}register_driver
  dt/usb: Eliminate users of of_platform_{,un}register_driver
  dt/video: Eliminate users of of_platform_{,un}register_driver
  dt/net: Eliminate users of of_platform_{,un}register_driver
  dt/sound: Eliminate users of of_platform_{,un}register_driver
  dt/spi: Eliminate users of of_platform_{,un}register_driver
  dt: uartlite: merge platform and of_platform driver bindings
  dt: xilinx_hwicap: merge platform and of_platform driver bindings
  ipmi: convert OF driver to platform driver
  leds/leds-gpio: merge platform_driver with of_platform_driver
  dt/sparc: Eliminate users of of_platform_{,un}register_driver
  dt/powerpc: Eliminate users of of_platform_{,un}register_driver
  dt/powerpc: move of_bus_type infrastructure to ibmebus
  drivercore/dt: add a match table pointer to struct device
  dt: Typo fix.
  altera_ps2: Add devicetree support
  ...
2011-03-16 17:28:10 -07:00
Timur Tabi
112e75466f watchdog: booke_wdt: clean up status messages
Improve the status messages that are displayed during some operations of the
PowerPC watchdog timer driver.  When the watchdog is enabled, the timeout is
displayed as a number of seconds, instead of an obscure "period".  The "period"
is the position of a bit in a 64-bit timer register.  The higher the value,
the quicker the watchdog timeout occurs.  Some people chose a high "period"
value for the timer and get confused as to why the board resets within a
few seconds.

Messages displayed during open and close are now debug messages, so that they
don't clutter the console by default.  Finally, printk() is replaced with the
pr_xxx() equivalent.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-15 16:02:39 +00:00
Wim Van Sebroeck
5f3b27569f watchdog: cleanup spaces before tabs
cleanup spaces before tabs in drivers/watchdog/

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-15 16:02:27 +00:00
Wim Van Sebroeck
4562f53940 watchdog: convert to DEFINE_PCI_DEVICE_TABLE
Convert static struct pci_device_id *[] to static DEFINE_PCI_DEVICE_TABLE tables.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-15 16:02:22 +00:00
Jan Beulich
066d6c7f4e watchdog: Xen watchdog driver
While the hypervisor change adding SCHEDOP_watchdog support included a
daemon to make use of the new functionality, having a kernel driver
for /dev/watchdog so that user space code doesn't need to distinguish
non-Xen and Xen seems to be preferable.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-15 16:02:18 +00:00
Donald Johnson
57539c1cf9 watchdog: Intel SCU Watchdog Timer Driver for Moorestown and Medfield platforms.
This submission includes:
  - Fix to intel_scu_write() to start watchdog timer the on the
    first write, and refresh on subsequent writes.
    This enables Open, write, write, ... usage model.
  - Moves boot parameter checks from intel_scu_open() to
    intel_scu_watchdog_init(), so driver init will fail if these
    parameters are out of bounds.
  - Adds check for whether process waiting in wait_event_interruptible()
    received a signal while it was waiting.
  - Other small error handling changes.

Removed the read() method for now as that wass a non-standard behaviour.

Signed-off-by: Donald Johnson <donald.k.johnson@intel.com>
Signed-off-by: Shuduo Sang <shuduo.sang@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-15 16:02:06 +00:00
Wim Van Sebroeck
742e4b6308 watchdog: jz4740_wdt - fix magic character checking
When writing to /dev/watchdog all characters should be checked
for the magic character 'V'.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-15 16:01:57 +00:00
Paul Cercueil
f865c35224 watchdog: add JZ4740 watchdog driver
Adds support for the hardware watchdog found in Ingenic's jz4740
System-on-Chip.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-15 16:01:44 +00:00
Huaro Tomita
4bc30272a1 watchdog: it87_wdt: Add support for IT8721F watchdog
This patch adds support for a watchdog in IT8721F Super IO
chip to it87_wdt driver.
This new chips differ from the older IT87xxxF chips 
in the following ways:

* WDT_GAMEPORT is not in IT8721F.
* WDT_PWROK is not in IT8721F.

Signed-off-by: Haruo Tomita <haruo.tomita@toshiba.co.jp>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-15 16:01:35 +00:00
Tony Camuso
a4616153de watchdog: hpwdt: build hpwdt as module by default with NMI_DECODING enabled
Builds the hpwdt driver as a module by default.
If the hardware is present, the module will be loaded.
Also, if hpwdt is loaded, it will decode NMIs by default.

This has been made possible by he patches to hpwdt made by Dann Frazier
as well as related patches submitted by Don Zickus.

hpwdt only loads on hp ProLiant x86 32-bit and 64-bit platforms.

Signed-off-by: Tony Camuso <tcamuso@redhat.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-15 16:01:24 +00:00
Naga Chumbalkar
ea6649c721 watchdog: hpwdt: Fix a couple of typos
Fix some typos.

Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-15 16:01:17 +00:00
Axel Lin
b77b708868 watchdog: hpwdt: eliminate section mismatch warning
hpwdt_init_nmi_decoding() is called in hpwdt_init_one error handling,
thus remove the  __devexit annotation of hpwdt_exit_nmi_decoding().

This patch fixes below warning:

WARNING: drivers/watchdog/hpwdt.o(.devinit.text+0x36f): Section mismatch in reference from the function hpwdt_init_one() to the function .devexit.text:hpwdt_exit_nmi_decoding()
The function __devinit hpwdt_init_one() references
a function __devexit hpwdt_exit_nmi_decoding().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
hpwdt_exit_nmi_decoding() so it may be used outside an exit section.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-14 10:44:31 +00:00
Wim Van Sebroeck
943413c5b6 watchdog: w83697ug_wdt: Fix set bit 0 to activate GPIO2
outb_p(c || 0x01, WDT_EFDR); -> || should be |

Reported-By: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-14 10:40:30 +00:00
Dan Carpenter
6899a8e13f watchdog: sch311x_wdt: fix printk condition
"==" has higher precedence than "&".  Since
if (sch311x_sio_inb(sio_config_port, 0x30) & (0x01 == 0)) is always
false the message is never printed.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-14 10:40:21 +00:00
Wim Van Sebroeck
a450c786a5 watchdog: sch311x_wdt: Fix LDN active check
if (sch311x_sio_inb(sio_config_port, 0x30) && 0x01 == 0) -> && should be &

Reported-By: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-14 10:39:53 +00:00
Wim Van Sebroeck
bbd562d717 watchdog: cpwd: Fix buffer-overflow
cppcheck-1.47 reports:
[drivers/watchdog/cpwd.c:650]: (error) Buffer access out-of-bounds: p.devs

The source code is
	for (i = 0; i < 4; i++) {
		misc_deregister(&p->devs[i].misc);

where devs is defined as WD_NUMDEVS big and WD_NUMDEVS is equal to 3.
So the 4 should be a 3 or WD_NUMDEVS.

Reported-By: David Binderman
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-14 10:39:27 +00:00
Paul Walmsley
0503add9d2 Watchdog: omap_wdt: add fine grain runtime-pm
The omap_wdt should only be in full active state when the
registers are being accessed. Otherwise the device can be
on lower power mode.

This patch is based on a patch created by Kalle Jokiniemi:
https://patchwork.kernel.org/patch/618231/
which is itself based on a patch created by Atal
Shargorodsky: http://lkml.org/lkml/2009/3/10/266.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@nokia.com>
Tested-by: Kalle Jokiniemi <kalle.jokiniemi@nokia.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Kevin Hilman <khilman@ti.com>
2011-03-10 22:40:05 -07:00
Jiri Slaby
d406577526 watchdog: sbc_fitpc2_wdt, fix crash on systems without DMI_BOARD_NAME
Some systems don't provide DMI_BOARD_NAME in their DMI tables. Avoid
crash in such situations in fitpc2_wdt_init.

The fix is to check if the dmi_get_system_info return value is NULL.

The oops:
BUG: unable to handle kernel NULL pointer dereference at           (null)
IP: [<ffffffff81253ae6>] strstr+0x26/0xa0
PGD 3966e067 PUD 39605067 PMD 0
Oops: 0000 [#1] SMP
last sysfs file: /sys/devices/system/cpu/cpu1/cache/index2/shared_cpu_map
CPU 1
Modules linked in: ...
Pid: 1748, comm: modprobe Not tainted 2.6.37-22-default #1 /Bochs
RIP: 0010:[<ffffffff81253ae6>]  [<ffffffff81253ae6>] strstr+0x26/0xa0
RSP: 0018:ffff88003ad73f18  EFLAGS: 00010206
RAX: 0000000000000000 RBX: 00000000ffffffed RCX: 00000000ffffffff
RDX: ffffffffa003f4cc RSI: ffffffffa003f4c2 RDI: 0000000000000000
...
CR2: 0000000000000000 CR3: 000000003b7ac000 CR4: 00000000000006e0
...
Process modprobe (pid: 1748, threadinfo ffff88003ad72000, task ffff88002e6365c0)
Stack: ...
Call Trace:
 [<ffffffffa004201f>] fitpc2_wdt_init+0x1f/0x13c [sbc_fitpc2_wdt]
 [<ffffffff810002da>] do_one_initcall+0x3a/0x170
...
Code: f3 c3 0f 1f 00 80 3e 00 53 48 89 f8 74 1b 48 89 f2 0f 1f 40 00 48 83 c2 01 80 3a 00 75 f7 49 89 d0 48 89 f8 49 29 f0 75 02 5b c3 <80> 3f 00 74 0e 0f 1f 44 00 00 48 83 c0 01 80 38 00 75 f7 49 89

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-09 21:33:37 +00:00
Justin P. Mattock
ae0e47f02a Remove one to many n's in a word
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-01 15:47:58 +01:00
Grant Likely
1c48a5c93d dt: Eliminate of_platform_{,un}register_driver
Final step to eliminate of_platform_bus_type.  They're all just
platform drivers now.

v2: fix type in pasemi_nand.c (thanks to Stephen Rothwell)

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-28 13:22:46 -07:00
Russell King
aa25afad2c ARM: amba: make probe() functions take const id tables
Make Primecell driver probe functions take a const pointer to their
ID tables.  Drivers should never modify their ID tables in their
probe handler.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-23 16:24:14 +00:00
Philippe De Muyter
4157a04d5d m68knommu: Rename m548x_wdt.c to m54xx_wdt.c
All m548x files were renamed to m54xx, except m548x_wdt.c.  Fix that.

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-02-08 15:07:45 +10:00
Philippe De Muyter
9b9c63ff1f m68knommu: fix m548x_wdt.c compilation after headers renaming
m548x headers were renamed to m54xx, but m548x_wdt.c still uses the
old names.  Fix that.

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-02-08 15:07:44 +10:00
Paul Mundt
e8cdfb0509 Merge branches 'sh/wdt', 'sh/pci-express-async' and 'common/serial-rework' into sh-latest 2011-01-26 18:24:18 +09:00
Philippe De Muyter
88cce42762 watchdog: Add MCF548x watchdog driver.
Add watchdog driver for MCF548x.

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12 13:51:35 +00:00
Gabor Juhos
f8394f61c6 watchdog: add driver for the Atheros AR71XX/AR724X/AR913X SoCs
This patch adds a driver for the built-in hardware watchdog device
of the Atheros AR71XX/AR724X/AR913X SoCs.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12 13:51:29 +00:00
Mike Waychison
456c730153 watchdog: Add TCO support for nVidia chipsets
This driver adds support for /dev/watchdog for boards using either the MCP51 or
MCP55 chipsets.  These are also known as the nForce 430 and nForce 550.  This
driver is likely to work on other chipsets as well, though those are the only
two that have been tested.

Signed-off-by: Mike Waychison <mikew@google.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12 13:51:23 +00:00
Priyanka Gupta
15e28bf130 watchdog: Add support for sp5100 chipset TCO
This driver adds /dev/watchdog support for the AMD sp5100 aka SB7x0 chipsets.

It follows the same conventions found in other /dev/watchdog drivers.

Signed-off-by: Priyanka Gupta <priyankag@google.com>
Signed-off-by: Mike Waychison <mikew@google.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12 13:51:16 +00:00
Lutz Ballaschke
e13752a1de watchdog: f71808e_wdt: add F71862FG, F71869 to Kconfig
Update Kconfig with the additional Fintek hardware that we support.

Signed-off-by: Lutz Ballaschke <vegan.grindcore@googlemail.com>
Acked-by: Giel van Schijndel <me@mortis.eu>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12 13:51:10 +00:00
Seth Heasley
203f8d893e watchdog: iTCO_wdt: TCO Watchdog patch for Intel DH89xxCC PCH
This patch adds the DeviceIDs for TCO Watchdog on the Intel DH89xxCC PCH.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12 10:25:16 +00:00
Wim Van Sebroeck
d38bd479a1 watchdog: iTCO_wdt: TCO Watchdog patch for Intel NM10 DeviceIDs
This patch adds the Intel NM10 DeviceIDs for iTCO Watchdog.

Reported-by: Dan Weinlader <dan@weinlader.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12 10:25:08 +00:00
Yegor Yefremov
568dba66ac watchdog: ks8695_wdt: include mach/hardware.h instead of mach/timex.h.
ks8695_wdt needs KS8695_CLOCK_RATE, which is defined in
mach/hardware.h, which is pulled in by the include of mach/timex.h,
but the latter is going away, so just include mach/hardware.h
directly.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12 10:24:52 +00:00
Randy Vinson
6ae98ed186 watchdog: Propagate Book E WDT period changes to all cores
When the watchdog period is changed, it needs to be propagated to all cores
in addition to the core that performed the change.

Signed-off-by: Randy Vinson <rvinson@mvista.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12 10:24:38 +00:00
Timur Tabi
5d63c13415 watchdog: add CONFIG_WATCHDOG_NOWAYOUT support to PowerPC Book-E watchdog driver
Normally, the watchdog is disabled when dev/watchdog is closed, but if
CONFIG_WATCHDOG_NOWAYOUT is defined, then it means that the watchdog should
remain enabled.  So we should disable it only if CONFIG_WATCHDOG_NOWAYOUT is
not defined.

Also ensure that /dev/watchdog is only opened by one process at a time.  That
way, a second process can't accidentally disable the watchdog while the first
process has it open.  There shouldn't be any need for more than one process to
open /dev/watchdog anyway.

Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12 10:24:27 +00:00
Namhyung Kim
a787e71068 watchdog: alim7101_wdt: fix compiler warning on alim7101_pci_tbl
Annotate alim7101_pci_tbl as '__used' to fix following warning:

  CC      drivers/watchdog/alim7101_wdt.o
drivers/watchdog/alim7101_wdt.c:433: warning: ‘alim7101_pci_tbl’ defined but not used

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12 10:24:11 +00:00
Namhyung Kim
202af5b307 watchdog: alim1535_wdt: fix compiler warning on ali_pci_tbl
Annotate ali_pci_tbl as '__used' to fix following warning:

  CC      drivers/watchdog/alim1535_wdt.o
drivers/watchdog/alim1535_wdt.c:304: warning: ‘ali_pci_tbl’ defined but not used

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12 10:23:55 +00:00
Herman Morsink Vollenbroek
6d106e0cac watchdog: Fix reboot on W83627ehf chipset.
The watchdog driver for the SUPERIO chip winbond w83627ehf does not work.
If you open /dev/watchdog and write a character to /dev/watchdog then
the watchdog will be triggered. However the watchdog will not trigger
the hardware RESET after the timeout, because the watchdog has never been
enabled.

Signed-off-by: Herman Morsink Vollenbroek <h.morsinkvollenbroek@home.nl>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12 10:23:52 +00:00
Benny Loenstrup Ammitzboell
9c67bea419 watchdog: Add watchdog support for W83627DHG chip
The following adds watchdog support for the Winbond W83627DHG chip.
I have tested it on a PQ7-M102XL (Intel Atom) board.

Signed-off-by: Benny Lønstrup Ammitzbøll <benny@ammitzboell-consult.dk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12 10:23:25 +00:00
Michel Arboi
df278dac20 watchdog: f71808e_wdt: Add Fintek F71869 watchdog
Add Fintek f71869 as a supported watchdog device.

Signed-off-by: Michel Arboi <michel@arboi.fr.eu.org>
Acked-by: Giel van Schijndel <me@mortis.eu>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12 10:23:04 +00:00
Lutz Ballaschke
7977ff6e3d watchdog: add f71862fg support
Watchdog support for Fintek F71862fg Super-I/O added.
Two different hardware reset pins of the F71862fg chip can be configured 
by an additional module parameter.

Signed-off-by: Lutz Ballaschke <vegan.grindcore@googlemail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12 10:21:39 +00:00
Lutz Ballaschke
f9a9f096d2 watchdog: clean-up f71808e_wdt.c
Cleaned up and replaced some magic numbers by constants.

Signed-off-by: Lutz Ballaschke <vegan.grindcore@googlemail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12 10:21:27 +00:00
Linus Torvalds
42776163e1 Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (28 commits)
  perf session: Fix infinite loop in __perf_session__process_events
  perf evsel: Support perf_evsel__open(cpus > 1 && threads > 1)
  perf sched: Use PTHREAD_STACK_MIN to avoid pthread_attr_setstacksize() fail
  perf tools: Emit clearer message for sys_perf_event_open ENOENT return
  perf stat: better error message for unsupported events
  perf sched: Fix allocation result check
  perf, x86: P4 PMU - Fix unflagged overflows handling
  dynamic debug: Fix build issue with older gcc
  tracing: Fix TRACE_EVENT power tracepoint creation
  tracing: Fix preempt count leak
  tracepoint: Add __rcu annotation
  tracing: remove duplicate null-pointer check in skb tracepoint
  tracing/trivial: Add missing comma in TRACE_EVENT comment
  tracing: Include module.h in define_trace.h
  x86: Save rbp in pt_regs on irq entry
  x86, dumpstack: Fix unused variable warning
  x86, NMI: Clean-up default_do_nmi()
  x86, NMI: Allow NMI reason io port (0x61) to be processed on any CPU
  x86, NMI: Remove DIE_NMI_IPI
  x86, NMI: Add priorities to handlers
  ...
2011-01-11 11:02:13 -08:00
Don Zickus
673a6092ce x86: Convert some devices to use DIE_NMIUNKNOWN
They are a handful of places in the code that register a die_notifier
as a catch all in case no claims the NMI.  Unfortunately, they trigger
on events like DIE_NMI and DIE_NMI_IPI, which depending on when they
registered may collide with other handlers that have the ability to
determine if the NMI is theirs or not.

The function unknown_nmi_error() makes one last effort to walk the
die_chain when no one else has claimed the NMI before spitting out
messages that the NMI is unknown.

This is a better spot for these devices to execute any code without
colliding with the other handlers.

The two drivers modified are only compiled on x86 arches I believe, so
they shouldn't be affected by other arches that may not have
DIE_NMIUNKNOWN defined.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Russ Anderson <rja@sgi.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: openipmi-developer@lists.sourceforge.net
Cc: dann frazier <dannf@hp.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294348732-15030-3-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07 15:08:52 +01:00
Linus Torvalds
3c0cb7c31c Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (416 commits)
  ARM: DMA: add support for DMA debugging
  ARM: PL011: add DMA burst threshold support for ST variants
  ARM: PL011: Add support for transmit DMA
  ARM: PL011: Ensure IRQs are disabled in UART interrupt handler
  ARM: PL011: Separate hardware FIFO size from TTY FIFO size
  ARM: PL011: Allow better handling of vendor data
  ARM: PL011: Ensure error flags are clear at startup
  ARM: PL011: include revision number in boot-time port printk
  ARM: vexpress: add sched_clock() for Versatile Express
  ARM i.MX53: Make MX53 EVK bootable
  ARM i.MX53: Some bug fix about MX53 MSL code
  ARM: 6607/1: sa1100: Update platform device registration
  ARM: 6606/1: sa1100: Fix platform device registration
  ARM i.MX51: rename IPU irqs
  ARM i.MX51: Add ipu clock support
  ARM: imx/mx27_3ds: Add PMIC support
  ARM: DMA: Replace page_to_dma()/dma_to_page() with pfn_to_dma()/dma_to_pfn()
  mx51: fix usb clock support
  MX51: Add support for usb host 2
  arch/arm/plat-mxc/ehci.c: fix errors/typos
  ...
2011-01-06 16:50:35 -08:00
Russell King
404a02cbd2 Merge branch 'devel-stable' into devel
Conflicts:
	arch/arm/mach-pxa/clock.c
	arch/arm/mach-pxa/clock.h
2011-01-06 22:33:32 +00:00
Ingo Molnar
cc22219699 Merge commit 'v2.6.37-rc8' into perf/core
Merge reason: pick up latest -rc.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-04 08:08:54 +01:00
Sascha Hauer
1fef891761 Merge branch 'sgu/mxs-core-v8' of git://git.pengutronix.de/git/ukl/linux-2.6 into imx-for-2.6.38-new 2011-01-03 10:15:11 +01:00
Don Zickus
4a7863cc2e x86, nmi_watchdog: Remove ARCH_HAS_NMI_WATCHDOG and rely on CONFIG_HARDLOCKUP_DETECTOR
The x86 arch has shifted its use of the nmi_watchdog from a
local implementation to the global one provide by
kernel/watchdog.c.  This shift has caused a whole bunch of
compile problems under different config options.  I attempt to
simplify things with the patch below.

In order to simplify things, I had to come to terms with the
meaning of two terms ARCH_HAS_NMI_WATCHDOG and
CONFIG_HARDLOCKUP_DETECTOR.  Basically they mean the same thing,
the former on a local level and the latter on a global level.

With the old x86 nmi watchdog gone, there is no need to rely on
defining the ARCH_HAS_NMI_WATCHDOG variable because it doesn't
make sense any more.  x86 will now use the global
implementation.

The changes below do a few things.  First it changes the few
places that relied on ARCH_HAS_NMI_WATCHDOG to use
CONFIG_X86_LOCAL_APIC (the former was an alias for the latter
anyway, so nothing unusual here).  Those pieces of code were
relying more on local apic functionality the nmi watchdog
functionality, so the change should make sense.

Second, I removed the x86 implementation of
touch_nmi_watchdog().  It isn't need now, instead x86 will rely
on kernel/watchdog.c's implementation.

Third, I removed the #define ARCH_HAS_NMI_WATCHDOG itself from
x86.  And tweaked the include/linux/nmi.h file to tell users to
look for an externally defined touch_nmi_watchdog in the case of
ARCH_HAS_NMI_WATCHDOG _or_ CONFIG_HARDLOCKUP_DETECTOR. This
changes removes some of the ugliness in that file.

Finally, I added a Kconfig dependency for
CONFIG_HARDLOCKUP_DETECTOR that said you can't have
ARCH_HAS_NMI_WATCHDOG _and_ CONFIG_HARDLOCKUP_DETECTOR.  You can
only have one nmi_watchdog.

Tested with
ARCH=i386: allnoconfig, defconfig, allyesconfig, (various broken
configs) ARCH=x86_64: allnoconfig, defconfig, allyesconfig,
(various broken configs)

Hopefully, after this patch I won't get any more compile broken
emails. :-)

v3:
  changed a couple of 'linux/nmi.h' -> 'asm/nmi.h' to pick-up correct function
  prototypes when CONFIG_HARDLOCKUP_DETECTOR is not set.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: fweisbec@gmail.com
LKML-Reference: <1293044403-14117-1-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-22 22:15:32 +01:00
Florian Fainelli
3b3c1f24e9 watchdog: Fix null pointer dereference while accessing rdc321x platform_data
rdc321x-wdt currently fetches its driver specific data by using the
platform_device->platform_data pointer, this is wrong because the mfd
device which registers our platform_device has been added using
mfd_add_device() which sets the platform_device->driver_data pointer
instead.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
CC: stable@kernel.org
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-12-22 12:05:21 +01:00
Fabio Estevam
2c1f4672f0 watchdog: imx: use clk_get to acquire the watchdog clock
Use clk_get to acquire the watchdog clock and also avoid hardcoding the clock name.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-14 09:54:19 +01:00
Ingo Molnar
10a18d7dc0 Merge commit 'v2.6.37-rc5' into perf/core
Merge reason: Pick up the latest -rc.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-07 07:49:51 +01:00
Wim Van Sebroeck
4fc3680894 watchdog: it8712f_wdt: add note to Kconfig
On some motherboards the it8712f watchdog does not work unless
the game port was enabled. see Bug 13140. We therefor add a note
to Kconfig.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-12-02 14:10:32 +00:00
Wolfram Sang & Martyn Welch
f6e0722fc3 watchdog: gef_wdt: include fs.h
Add missing include "linux/fs.h".
This fixes compile failure.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-12-02 14:10:21 +00:00
Wim Van Sebroeck
e6c3b699b2 watchdog: bcm63xx_wdt: improve platform part.
* fix devinit and devexit sections
* fix platform removal code so that the iounmap happens after the removal of the timer.
* changes the reboot_notifier by a platform shutdown method.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-12-02 14:10:16 +00:00
Seth Heasley
c54fb81174 watchdog: iTCO_wdt: TCO Watchdog patch for Intel Patsburg PCH
This patch adds an additional LPC Controller DeviceID for the Intel Patsburg PCH for TCO Watchdog.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-12-02 14:10:05 +00:00
Don Zickus
072b198a4a x86, nmi_watchdog: Remove all stub function calls from old nmi_watchdog
Now that the bulk of the old nmi_watchdog is gone, remove all
the stub variables and hooks associated with it.

This touches lots of files mainly because of how the io_apic
nmi_watchdog was implemented.  Now that the io_apic nmi_watchdog
is forever gone, remove all its fingers.

Most of this code was not being exercised by virtue of
nmi_watchdog != NMI_IO_APIC, so there shouldn't be anything to
risky here.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: fweisbec@gmail.com
Cc: gorcunov@openvz.org
LKML-Reference: <1289578944-28564-3-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18 09:08:23 +01:00
David Daney
468ffde46d WATCHDOG: octeon-wdt: Use I/O clock rate for timing calculations.
The creation of the I/O clock domain requires some adjustments.  Since
the watchdog counters are clocked by the I/O clock, use its rate for
timing calculations.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: linux-watchdog@vger.kernel.org
Patchwork: http://patchwork.linux-mips.org/patch/1659/
Acked-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:42 +01:00
Prarit Bhargava
ad1d3a26cd watchdog: iTCO_wdt.c: remove extra pci_dev_put()'s from init code
The iTCO_wdt driver erroneously releases the pci_dev, and causes PCI hotremove
to fail because of an incorrect usage count.

The probe for this driver does a for_each_pci_dev() which gets a reference for
a pci_dev when iTCO_wdt_init() is successful.  The for_each_pci_dev() loop
puts a reference for a pci_dev when iTCO_wdt_init() fails, so the
iTCO_wdt_init() does not need to do any pci_dev_put()'s.

The only pci_dev_put() that is required is in the iTCO_wdt_cleanup() function.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-10-28 22:34:37 +00:00
Florian Fainelli
b63aa731cd watchdog: add support for Broadcom BCM63xx built-in watchdog
This patch adds support for the Broadcom BCM63xx SoC built-in watchdog, it
uses one of the BCM63xx hardware timer id.

Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-10-28 21:43:55 +00:00
Giel van Schijndel
dee00abbbc watchdog: f71808e_wdt: add support for the F71889FG
Signed-off-by: Giel van Schijndel <me@mortis.eu>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-10-28 21:43:35 +00:00
Nicolas Kaiser
29c3e8c8d1 watchdog: MachZ: fix debug macro
Fix debug macro line wrapping.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-10-28 21:42:59 +00:00
Timo Juhani Lindfors
a422088db2 watchdog: it8712f_wdt: Add module parameter for alternative reset sources
On iEi PCISA-9652-R10 (BIOS version 1.5) single board computer reads
from the game port do not seem to reset the watchdog timer. This patch
adds a module parameter wdt_config_reg to specify alternative reset
sources. At least WDT_RESET_KBD has been tested, even just running

while true; do
    setleds -L +scroll
    sleep 1
    setleds -L -scroll
    sleep 1
done

is enough to keep the watchdog happy.

Signed-off-by: Timo Juhani Lindfors <timo.lindfors@iki.fi>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-10-28 21:42:32 +00:00
Timo Juhani Lindfors
f0fc10745a watchdog: it8712f_wdt: Add comments for config/control register names
Signed-off-by: Timo Juhani Lindfors <timo.lindfors@iki.fi>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-10-28 21:42:14 +00:00
Ondrej Zajicek
dfb0b8eae1 watchdog: it87_wdt: Add support for watchdogs with 8b timers
This patch adds support for watchdogs with 8b timers, like ones in
IT8702F and older revisions of IT8712F Super IO chip, to it87_wdt
driver. This patch should be used after the patch
'it87_wdt: Add support for IT8720F watchdog'.

Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2010-10-28 21:41:08 +00:00
Ondrej Zajicek
ee3e96583e watchdog: it87_wdt: Add support for IT8720F watchdog
This simple patch adds support for a watchdog in IT8720F Super IO chip
to it87_wdt driver.

Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2010-10-28 21:37:59 +00:00
Joe Perches
a2b89cd85e watchdog: Use static const char * const where possible
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-10-28 21:36:05 +00:00
Prarit Bhargava
641912f479 watchdog: iTCO_wdt: Cleanup warning messages
The current iTCO_wdt driver warnings are confusing.  Currently when the device
driver returns an error the console contains:

iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
iTCO_wdt: No card detected

After the patch,

iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: failed to reset NO_REBOOT flag, device disabled by hardware/BIOS

Clean this up and use the word "device" to describe the device.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-10-28 21:33:17 +00:00
Seth Heasley
cad0df3700 watchdog: iTCO_wdt: TCO Watchdog patch for Intel Patsburg DeviceIDs
This patch adds the Intel Patsburg (PCH) DeviceIDs for iTCO Watchdog.
 
Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-10-28 21:33:01 +00:00
Linus Torvalds
7b6181e068 Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (163 commits)
  omap: complete removal of machine_desc.io_pg_offst and .phys_io
  omap: UART: fix wakeup registers for OMAP24xx UART2
  omap: Fix spotty MMC voltages
  ASoC: OMAP4: MCPDM: Remove unnecessary include of plat/control.h
  serial: omap-serial: fix signess error
  OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish
  omap: dma: Fix buffering disable bit setting for omap24xx
  omap: serial: Fix the boot-up crash/reboot without CONFIG_PM
  OMAP3: PM: fix scratchpad memory accesses for off-mode
  omap4: pandaboard: enable the ehci port on pandaboard
  omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set
  omap4: pandaboard: remove unused hsmmc definition
  OMAP: McBSP: Remove null omap44xx ops comment
  OMAP: McBSP: Swap CLKS source definition
  OMAP: McBSP: Fix CLKR and FSR signal muxing
  OMAP2+: clock: reduce the amount of standard debugging while disabling unused clocks
  OMAP: control: move plat-omap/control.h to mach-omap2/control.h
  OMAP: split plat-omap/common.c
  OMAP: McBSP: implement functional clock switching via clock framework
  OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c
  ...

Fixed up trivial conflicts in arch/arm/mach-omap2/
{board-zoom-peripherals.c,devices.c} as per Tony
2010-10-25 13:46:56 -07:00
Linus Torvalds
092e0e7e52 Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  vfs: make no_llseek the default
  vfs: don't use BKL in default_llseek
  llseek: automatically add .llseek fop
  libfs: use generic_file_llseek for simple_attr
  mac80211: disallow seeks in minstrel debug code
  lirc: make chardev nonseekable
  viotape: use noop_llseek
  raw: use explicit llseek file operations
  ibmasmfs: use generic_file_llseek
  spufs: use llseek in all file operations
  arm/omap: use generic_file_llseek in iommu_debug
  lkdtm: use generic_file_llseek in debugfs
  net/wireless: use generic_file_llseek in debugfs
  drm: use noop_llseek
2010-10-22 10:52:56 -07:00
Linus Torvalds
c37927d435 Merge branch 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  block: autoconvert trivial BKL users to private mutex
  drivers: autoconvert trivial BKL users to private mutex
  ipmi: autoconvert trivial BKL users to private mutex
  mac: autoconvert trivial BKL users to private mutex
  mtd: autoconvert trivial BKL users to private mutex
  scsi: autoconvert trivial BKL users to private mutex

Fix up trivial conflicts (due to addition of private mutex right next to
deletion of a version string) in drivers/char/pcmcia/cm40[04]0_cs.c
2010-10-22 10:49:54 -07:00