Commit graph

22 commits

Author SHA1 Message Date
Andi Kleen
0933e2d98d driver core: Convert some drivers to CLASS_ATTR_STRING
Convert some drivers who export a single string as class attribute
to the new class_attr_string functions. This removes redundant
code all over.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:48 -08:00
Andi Kleen
28812fe11a driver-core: Add attribute argument to class_attribute show/store
Passing the attribute to the low level IO functions allows all kinds
of cleanups, by sharing low level IO code without requiring
an own function for every piece of data.

Also drivers can extend the attributes with own data fields
and use that in the low level function.

This makes the class attributes the same as sysdev_class attributes
and plain attributes.

This will allow further cleanups in drivers.

Full tree sweep converting all users.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:48 -08:00
Linus Torvalds
44040f107e Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (133 commits)
  drm/vgaarb: add VGA arbitration support to the drm and kms.
  drm/radeon: some r420s have a CP race with the DMA engine.
  drm/radeon/r600/kms: rv670 is not DCE3
  drm/radeon/kms: r420 idle after programming GA_ENHANCE
  drm/radeon/kms: more fixes to rv770 suspend/resume path.
  drm/radeon/kms: more alignment for rv770.c with r600.c
  drm/radeon/kms: rv770 blit init called too late.
  drm/radeon/kms: move around new init path code to avoid posting at init
  drm/radeon/r600: fix some issues with suspend/resume.
  drm/radeon/kms: disable VGA rendering engine before taking over VRAM
  drm/radeon/kms: Move radeon_get_clock_info() call out of radeon_clocks_init().
  drm/radeon/kms: add initial connector properties
  drm/radeon/kms: Use surfaces for scanout / cursor byte swapping on big endian.
  drm/radeon/kms: don't fail if we fail to init GPU acceleration
  drm/r600/kms: fixup number of loops per blit calculation.
  drm/radeon/kms: reprogram format in set base.
  drm/radeon: avivo chips have no separate int bit for display
  drm/radeon/r600: don't do interrupts
  drm: fix _DRM_GEM addmap error message
  drm: update crtc x/y when only fb changes
  ...

Fixed up trivial conflicts in firmware/Makefile due to network driver
(cxgb3) and drm (mga/r128/radeon) firmware being listed next to each
other.
2009-09-21 08:10:09 -07:00
Kay Sievers
e454cea20b Driver-Core: extend devnode callbacks to provide permissions
This allows subsytems to provide devtmpfs with non-default permissions
for the device node. Instead of the default mode of 0600, null, zero,
random, urandom, full, tty, ptmx now have a mode of 0666, which allows
non-privileged processes to access standard device nodes in case no
other userspace process applies the expected permissions.

This also fixes a wrong assignment in pktcdvd and a checkpatch.pl complain.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19 12:50:38 -07:00
Dave Airlie
11670d3c93 Merge intel drm-intel-next branch
Merge remote branch 'anholt/drm-intel-next' of ../anholt-2.6 into drm-next

Conflicts:
	drivers/gpu/drm/i915/intel_display.c
	drivers/gpu/drm/i915/intel_drv.h
	drivers/gpu/drm/i915/intel_sdvo.c
2009-09-07 20:27:20 +10:00
Thomas Hellstrom
08e4d53474 drm: Fix sysfs device confusion.
The drm sysfs class suspend / resume methods could not distinguish
between different device types wich could lead to illegal type casts.

Use struct device_type and make sure the class suspend / resume callbacks
are aware of those. There is no per device-type suspend / resume. Only
new-style PM.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-21 10:01:59 +10:00
Thomas Hellstrom
327c225bd5 drm: Enable drm drivers to add drm sysfs devices.
Export utility functions for drivers to add specialized devices in the
sysfs drm class subdirectory.

Initially this will be needed form TTM to add a virtual device that
handles power management.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-08-19 16:08:51 +10:00
Francisco Jerez
74bd3c26b9 drm: Define DRM_MODE_CONNECTOR_TV
The existing TV connector types are often unsuitable either because
there is no way to probe them until they're actually plugged in or
because they can change during run time (e.g. 7-pin DIN connectors
that behave as S-Video, Component, Composite or SCART depending on the
adaptor plugged in).

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04 14:10:56 +10:00
Kay Sievers
02200d0664 Driver Core: drm: add nodename for drm devices
This adds support to the drm core to report the proper device name to
userspace for the drm devices.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:30:26 -07:00
Keith Packard
e36ebaf492 drm: set permissions on edid file to 0444
Without initializing the sysfs attributes for the edid file,
it was created with mode 0, making it difficult for applications to use.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-04 09:32:12 +10:00
Keith Packard
75185c929e drm: add newlines to text sysfs files
The contents of various simple text files in sysfs should end with
a newline to make them easier to read from the console.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-04 09:32:12 +10:00
Jonas Bonn
400138bc8b drm: remove unreachable code in drm_sysfs.c
This code was never going to get called in there.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-04-24 15:06:36 +10:00
Ma Ling
77d26dc9b9 drm: clean dirty memory after device release
In current code we register/unregister connector object by
drm_sysfs_connector_add/remove function.

However under some cases, we need to dynamically register or unregister device
multiple times, so we have to go through register -> unregister ->register
routine.

Because after device_unregister function our memory is dirty, we need to do
clean operation in order to re-register the device, otherwise the system
will crash.  The patch intends to clean device after device release.

Signed-off-by: Ma Ling <ling.ma@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-04-20 10:03:46 +10:00
Jesse Barnes
5ca5828208 drm/i915: add VGA hotplug support for 945+
Add VGA port hotplug detection to the i915 driver.  When KMS is enabled,
plugging in or removing a VGA cable from the VGA connector will
generate a uevent, which indicates to userspace that it should re-probe
outputs on this device (to determine modes, etc.).

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[anholt: dropped extra PORT_HOTPLUG_STAT clear with ack from jbarnes]
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-04-01 15:21:57 -07:00
Dave Airlie
90f959bcb3 drm: merge Linux master into HEAD
Conflicts:
	drivers/gpu/drm/drm_info.c
	drivers/gpu/drm/drm_proc.c
	drivers/gpu/drm/i915/i915_gem_debugfs.c
2009-03-28 20:22:18 -04:00
Kay Sievers
2ead054cd2 drm: struct device - replace bus_id with dev_name(), dev_set_name()
Cc: airlied@linux.ie
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
2009-03-24 16:38:22 -07:00
Kristian Høgsberg
8e1004580e drm: Drop unused and broken dri_library_name sysfs attribute.
The kernel shouldn't be in the business of telling user space which
driver to load.  The kernel defers mapping PCI IDs to module names
to user space and we should do the same for DRI drivers.

And in fact, that's how it does work today.  Nothing uses the
dri_library_name attribute, and the attribute is in fact broken.
For intel devices, it falls back to the default behaviour of returning
the kernel module name as the DRI driver name, which doesn't work for
i965 devices.  Nobody has ever hit this problem or filed a bug about this.

Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-03-13 14:23:58 +10:00
Kristian Høgsberg
112b715e8e drm: claim PCI device when running in modesetting mode.
Under kernel modesetting, we manage the device at all times, regardless
of VT switching and X servers, so the only decent thing to do is to
claim the PCI device.  In that case, we call the suspend/resume hooks
directly from the pci driver hooks instead of the current class device detour.

Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-03-13 14:23:58 +10:00
Kay Sievers
8f4bbd9f59 gpu: struct device - replace bus_id with dev_name(), dev_set_name()
CC: Dave Airlie <airlied@redhat.com>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06 10:44:41 -08:00
Dave Airlie
f453ba0460 DRM: add mode setting support
Add mode setting support to the DRM layer.

This is a fairly big chunk of work that allows DRM drivers to provide
full output control and configuration capabilities to userspace.  It was
motivated by several factors:
  - the fb layer's APIs aren't suited for anything but simple
    configurations
  - coordination between the fb layer, DRM layer, and various userspace
    drivers is poor to non-existent (radeonfb excepted)
  - user level mode setting drivers makes displaying panic & oops
    messages more difficult
  - suspend/resume of graphics state is possible in many more
    configurations with kernel level support

This commit just adds the core DRM part of the mode setting APIs.
Driver specific commits using these new structure and APIs will follow.

Co-authors: Jesse Barnes <jbarnes@virtuousgeek.org>, Jakob Bornecrantz <jakob@tungstengraphics.com>
Contributors: Alan Hourihane <alanh@tungstengraphics.com>, Maarten Maathuis <madman2003@gmail.com>

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29 17:47:23 +10:00
Dave Airlie
38eda21189 drm: fix sysfs error path.
Pointed out by Roel Kluin on dri-devel.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18 07:10:11 +10:00
Dave Airlie
c0e09200dc drm: reorganise drm tree to be more future proof.
With the coming of kernel based modesetting and the memory manager stuff,
the everything in one directory approach was getting very ugly and
starting to be unmanageable.

This restructures the drm along the lines of other kernel components.

It creates a drivers/gpu/drm directory and moves the hw drivers into
subdirectores. It moves the includes into an include/drm, and
sets up the unifdef for the userspace headers we should be exporting.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-14 10:45:01 +10:00
Renamed from drivers/char/drm/drm_sysfs.c (Browse further)