Commit graph

26 commits

Author SHA1 Message Date
Eric Dumazet
e42ea986e4 net: Cleanup of neighbour code
Using read_pnet() and write_pnet() in neighbour code ease the reading
of code.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-12 00:54:54 -08:00
Alexey Dobriyan
9b739ba5e6 net: remove struct neigh_table::pde
->pde isn't actually needed, since name is stashed in ->id.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-11 16:47:44 -08:00
Neil Horman
9a6d276e85 core: add stat to track unresolved discards in neighbor cache
in __neigh_event_send, if we have a neighbour entry which is in
NUD_INCOMPLETE state, we enqueue any outbound frames to that neighbour
to the neighbours arp_queue, which is default capped to a length of 3
skbs.  If that queue exceeds its set length, it will drop an skb on
the queue to enqueue the newly arrived skb.  This results in a drop
for which we have no statistics incremented.  This patch adds an
unresolved_discards stat to /proc/net/stat/ndisc_cache to track these
lost frames.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-16 20:50:49 -07:00
David S. Miller
8e8e43843b Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/net/usb/rndis_host.c
	drivers/net/wireless/b43/dma.c
	net/ipv6/ndisc.c
2008-03-27 18:48:56 -07:00
YOSHIFUJI Hideaki
57da52c1e6 [NET] NETNS: Omit neigh_parms->net and pneigh_entry->net without CONFIG_NET_NS.
Introduce neigh_parms/pneigh_entry inlines: neigh_parms_net(), pneigh_net().
Without CONFIG_NET_NS, no namespace other than &init_net exists.
Let's explicitly define them to help compiler optimizations.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-26 04:39:58 +09:00
Pavel Emelyanov
fa86d322d8 [NEIGH]: Fix race between pneigh deletion and ipv6's ndisc_recv_ns (v3).
Proxy neighbors do not have any reference counting, so any caller
of pneigh_lookup (unless it's a netlink triggered add/del routine)
should _not_ perform any actions on the found proxy entry. 

There's one exception from this rule - the ipv6's ndisc_recv_ns() 
uses found entry to check the flags for NTF_ROUTER.

This creates a race between the ndisc and pneigh_delete - after 
the pneigh is returned to the caller, the nd_tbl.lock is dropped 
and the deleting procedure may proceed.

One of the fixes would be to add a reference counting, but this
problem exists for ndisc only. Besides such a patch would be too 
big for -rc4.

So I propose to introduce a __pneigh_lookup() which is supposed
to be called with the lock held and use it in ndisc code to check
the flags on alive pneigh entry.


Changes from v2:
As David noticed, Exported the __pneigh_lookup() to ipv6 module. 
The checkpatch generates a warning on it, since the EXPORT_SYMBOL 
does not follow the symbol itself, but in this file all the 
exports come at the end, so I decided no to break this harmony.

Changes from v1:
Fixed comments from YOSHIFUJI - indentation of prototype in header
and the pndisc_check_router() name - and a compilation fix, pointed
by Daniel - the is_routed was (falsely) considered as uninitialized
by gcc.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-24 14:48:59 -07:00
YOSHIFUJI Hideaki
8082c37cdc [NET] NEIGHBOUR: Remove unpopular neigh_is_connected().
neigh_is_connected() is not popular at all, and the only user
drivers/net/cxgb3/l2t.c:t3_l2t_update() also have raw (expanded) expression.
Let's expand it and remove the inline function.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-04 15:18:23 +09:00
Denis V. Lunev
06f0511df1 [ARP]: neigh_parms_put(destroy) are essentially local to core/neighbour.c.
Make them static.

[ Moved the inline before, instead of after, call sites. -DaveM ]

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:02:11 -08:00
Pavel Emelyanov
39971554d3 [NEIGH]: Add a comment describing what a NUD stands for.
When I studied the neighbor code I puzzled over what the NUD can mean
for quite a long time.

Finally I asked Alexey and he said that this was smth like "neighbor
unreachability detection".

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:01:43 -08:00
Denis V. Lunev
4250846146 [NEIGH]: Make /proc/net/arp opening consistent with seq_net_open semantics
seq_open_net requires that first field of the seq->private data to be
struct seq_net_private. In reality this is a single pointer to a
struct net for now. The patch makes code consistent.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:01:37 -08:00
Rami Rosen
f624357959 [NEIGH]: Remove unused method from include/net/neighbour.h
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:00:17 -08:00
Eric W. Biederman
426b5303eb [NETNS]: Modify the neighbour table code so it handles multiple network namespaces
I'm actually surprised at how much was involved.  At first glance it
appears that the neighbour table data structures are already split by
network device so all that should be needed is to modify the user
interface commands to filter the set of neighbours by the network
namespace of their devices.

However a couple things turned up while I was reading through the
code.  The proxy neighbour table allows entries with no network
device, and the neighbour parms are per network device (except for the
defaults) so they now need a per network namespace default.

So I updated the two structures (which surprised me) with their very
own network namespace parameter.  Updated the relevant lookup and
destroy routines with a network namespace parameter and modified the
code that interacts with users to filter out neighbour table entries
for devices of other namespaces.

I'm a little concerned that we can modify and display the global table
configuration and from all network namespaces.  But this appears good
enough for now.

I keep thinking modifying the neighbour table to have per network
namespace instances of each table type would should be cleaner.  The
hash table is already dynamically sized so there are it is not a
limiter.  The default parameter would be straight forward to take care
of.  However when I look at the how the network table is built and
used I still find some assumptions that there is only a single
neighbour table for each type of table in the kernel.  The netlink
operations, neigh_seq_start, the non-core network users that call
neigh_lookup.  So while it might be doable it would require more
refactoring than my current approach of just doing a little extra
filtering in the code.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:00:03 -08:00
Thomas Graf
c8822a4e00 [NEIGH]: Use rtnl registration interface
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:27:06 -07:00
Alexey Kuznetsov
ecbb416939 [NET]: Fix neighbour destructor handling.
->neigh_destructor() is killed (not used), replaced with
->neigh_cleanup(), which is called when neighbor entry goes to dead
state. At this point everything is still valid: neigh->dev,
neigh->parms etc.

The device should guarantee that dead neighbor entries (neigh->dead !=
0) do not get private part initialized, otherwise nobody will cleanup
it.

I think this is enough for ipoib which is the only user of this thing.
Initialization private part of neighbor entries happens in ipib
start_xmit routine, which is not reached when device is down.  But it
would be better to add explicit test for neigh->dead in any case.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25 18:48:01 -07:00
Stephen Hemminger
3644f0cee7 [NET]: Convert hh_lock to seqlock.
The hard header cache is in the main output path, so using
seqlock instead of reader/writer lock should reduce overhead.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-08 17:19:20 -08:00
Christoph Lameter
e18b890bb0 [PATCH] slab: remove kmem_cache_t
Replace all uses of kmem_cache_t with struct kmem_cache.

The patch was generated using the following script:

	#!/bin/sh
	#
	# Replace one string by another in all the kernel sources.
	#

	set -e

	for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do
		quilt add $file
		sed -e "1,\$s/$1/$2/g" $file >/tmp/$$
		mv /tmp/$$ $file
		quilt refresh
	done

The script was run like this

	sh replace kmem_cache_t "struct kmem_cache"

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:25 -08:00
Ville Nuorvala
62dd93181a [IPV6] NDISC: Set per-entry is_router flag in Proxy NA.
We have sent NA with router flag from the node-wide forwarding
configuration.  This is not appropriate for proxy NA, and it should be
set according to each proxy entry's configuration.

This is used by Mobile IPv6 home agent to support physical home link
in acting as a proxy router for mobile node which is not a router,
for example.

Based on MIPL2 kernel patch.

Signed-off-by: Ville Nuorvala <vnuorval@tcs.hut.fi>
Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-09-22 15:20:24 -07:00
Stephen Hemminger
d924424aae [NEIGHBOUR]: Use ALIGN() macro.
Rather than opencoding the mask, it looks better to use ALIGN()
macro from kernel.h.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 14:54:23 -07:00
Thomas Graf
9067c722cf [NEIGH]: Move netlink neighbour bits to linux/neighbour.h
Moves netlink neighbour bits to linux/neighbour.h. Also
moves bits to be exported to userspace from net/neighbour.h
to linux/neighbour.h and removes __KERNEL__ guards, userspace
is not supposed to be using it.

rtnetlink_rcv_msg() is not longer required to parse attributes
for the neighbour layer, remove dependency on obsolete and
buggy rta_buf.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 14:54:01 -07:00
Simon Kelley
bd89efc532 [NEIGH]: Fix IP-over-ATM and ARP interaction.
The classical IP over ATM code maintains its own IPv4 <-> <ATM stuff>
ARP table, using the standard neighbour-table code. The
neigh_table_init function adds this neighbour table to a linked list
of all neighbor tables which is used by the functions neigh_delete()
neigh_add() and neightbl_set(), all called by the netlink code.

Once the ATM neighbour table is added to the list, there are two
tables with family == AF_INET there, and ARP entries sent via netlink
go into the first table with matching family. This is indeterminate
and often wrong.

To see the bug, on a kernel with CLIP enabled, create a standard IPv4
ARP entry by pinging an unused address on a local subnet. Then attempt
to complete that entry by doing

ip neigh replace <ip address> lladdr <some mac address> nud reachable

Looking at the ARP tables by using 

ip neigh show

will reveal two ARP entries for the same address. One of these can be
found in /proc/net/arp, and the other in /proc/net/atm/arp.

This patch adds a new function, neigh_table_init_no_netlink() which
does everything the neigh_table_init() does, except add the table to
the netlink all-arp-tables chain. In addition neigh_table_init() has a
check that all tables on the chain have a distinct address family.
The init call in clip.c is changed to call
neigh_table_init_no_netlink().

Since ATM ARP tables are rather more complicated than can currently be
handled by the available rtattrs in the netlink protocol, no
functionality is lost by this patch, and non-ATM ARP manipulation via
netlink is rescued. A more complete solution would involve a rtattr
for ATM ARP entries and some way for the netlink code to give
neigh_add and friends more information than just address family with
which to find the correct ARP table.

[ I've changed the assertion checking in neigh_table_init() to not
  use BUG_ON() while holding neigh_tbl_lock.  Instead we remember that
  we found an existing tbl with the same family, and after dropping
  the lock we'll give a diagnostic kernel log message and a stack dump.
  -DaveM ]

Signed-off-by: Simon Kelley <simon@thekelleys.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-12 14:56:08 -07:00
Michael S. Tsirkin
c5ecd62c25 [NET]: Move destructor from neigh->ops to neigh_params
struct neigh_ops currently has a destructor field, which no in-kernel
drivers outside of infiniband use.  The infiniband/ulp/ipoib in-tree
driver stashes some info in the neighbour structure (the results of
the second-stage lookup from ARP results to real link-level path), and
it uses neigh->ops->destructor to get a callback so it can clean up
this extra info when a neighbour is freed.  We've run into problems
with this: since the destructor is in an ops field that is shared
between neighbours that may belong to different net devices, there's
no way to set/clear it safely.

The following patch moves this field to neigh_parms where it can be
safely set, together with its twin neigh_setup.  Two additional
patches in the patch series update ipoib to use this new interface.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:25:41 -08:00
Arnaldo Carvalho de Melo
14c850212e [INET_SOCK]: Move struct inet_sock & helper functions to net/inet_sock.h
To help in reducing the number of include dependencies, several files were
touched as they were getting needed headers indirectly for stuff they use.

Thanks also to Alan Menegotto for pointing out that net/dccp/proto.c had
linux/dccp.h include twice.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-03 13:11:21 -08:00
Patrick McHardy
a61bbcf28a [NET]: Store skb->timestamp as offset to a base timestamp
Reduces skb size by 8 bytes on 64-bit.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29 15:58:24 -07:00
Thomas Graf
88121aea7b [NEIGHBOUR]: Remove unused fields in struct neigh_parms and neigh_table
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-18 22:51:12 -07:00
Thomas Graf
c7fb64db00 [NETLINK]: Neighbour table configuration and statistics via rtnetlink
To retrieve the neighbour tables send RTM_GETNEIGHTBL with the
NLM_F_DUMP flag set. Every neighbour table configuration is
spread over multiple messages to avoid running into message
size limits on systems with many interfaces. The first message
in the sequence transports all not device specific data such as
statistics, configuration, and the default parameter set.
This message is followed by 0..n messages carrying device
specific parameter sets.

Although the ordering should be sufficient, NDTA_NAME can be
used to identify sequences. The initial message can be identified
by checking for NDTA_CONFIG. The device specific messages do
not contain this TLV but have NDTPA_IFINDEX set to the
corresponding interface index.

To change neighbour table attributes, send RTM_SETNEIGHTBL
with NDTA_NAME set. Changeable attribute include NDTA_THRESH[1-3],
NDTA_GC_INTERVAL, and all TLVs in NDTA_PARMS unless marked
otherwise. Device specific parameter sets can be changed by
setting NDTPA_IFINDEX to the interface index of the corresponding
device.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-18 22:50:55 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00