Commit graph

578 commits

Author SHA1 Message Date
Linus Torvalds
5f6fb45466 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (116 commits)
  x86: Enable forced interrupt threading support
  x86: Mark low level interrupts IRQF_NO_THREAD
  x86: Use generic show_interrupts
  x86: ioapic: Avoid redundant lookup of irq_cfg
  x86: ioapic: Use new move_irq functions
  x86: Use the proper accessors in fixup_irqs()
  x86: ioapic: Use irq_data->state
  x86: ioapic: Simplify irq chip and handler setup
  x86: Cleanup the genirq name space
  genirq: Add chip flag to force mask on suspend
  genirq: Add desc->irq_data accessor
  genirq: Add comments to Kconfig switches
  genirq: Fixup fasteoi handler for oneshot mode
  genirq: Provide forced interrupt threading
  sched: Switch wait_task_inactive to schedule_hrtimeout()
  genirq: Add IRQF_NO_THREAD
  genirq: Allow shared oneshot interrupts
  genirq: Prepare the handling of shared oneshot interrupts
  genirq: Make warning in handle_percpu_event useful
  x86: ioapic: Move trigger defines to io_apic.h
  ...

Fix up trivial(?) conflicts in arch/x86/pci/xen.c due to genirq name
space changes clashing with the Xen cleanups.  The set_irq_msi() had
moved to xen_bind_pirq_msi_to_irq().
2011-03-15 19:23:40 -07:00
Konrad Rzeszutek Wilk
44626e4a3b xen: events: Fix compile error if CONFIG_SMP is not defined.
drivers/xen/events.c:396: error: 'struct irq_data' has no member named 'affinity'

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-15 16:40:33 -04:00
Linus Torvalds
76ca078328 Merge branch 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm
* 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm:
  xen: suspend: remove xen_hvm_suspend
  xen: suspend: pull pre/post suspend hooks out into suspend_info
  xen: suspend: move arch specific pre/post suspend hooks into generic hooks
  xen: suspend: refactor non-arch specific pre/post suspend hooks
  xen: suspend: add "arch" to pre/post suspend hooks
  xen: suspend: pass extra hypercall argument via suspend_info struct
  xen: suspend: refactor cancellation flag into a structure
  xen: suspend: use HYPERVISOR_suspend for PVHVM case instead of open coding
  xen: switch to new schedop hypercall by default.
  xen: use new schedop interface for suspend
  xen: do not respond to unknown xenstore control requests
  xen: fix compile issue if XEN is enabled but XEN_PVHVM is disabled
  xen: PV on HVM: support PV spinlocks and IPIs
  xen: make the ballon driver work for hvm domains
  xen-blkfront: handle Xen major numbers other than XENVBD
  xen: do not use xen_info on HVM, set pv_info name to "Xen HVM"
  xen: no need to delay xen_setup_shutdown_event for hvm guests anymore
2011-03-15 10:59:09 -07:00
Linus Torvalds
27d2a8b97e Merge branches 'stable/ia64', 'stable/blkfront-cleanup' and 'stable/cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/ia64' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: ia64 build broken due to "xen: switch to new schedop hypercall by default."

* 'stable/blkfront-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: Union the blkif_request request specific fields

* 'stable/cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: annotate functions which only call into __init at start of day
  xen p2m: annotate variable which appears unused
  xen: events: mark cpu_evtchn_mask_p as __refdata
2011-03-15 10:49:16 -07:00
Linus Torvalds
010b8f4e26 Merge branch 'stable/irq.cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/irq.cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: events: remove dom0 specific xen_create_msi_irq
  xen: events: use xen_bind_pirq_msi_to_irq from xen_create_msi_irq
  xen: events: push set_irq_msi down into xen_create_msi_irq
  xen: events: update pirq_to_irq in xen_create_msi_irq
  xen: events: refactor xen_create_msi_irq slightly
  xen: events: separate MSI PIRQ allocation from PIRQ binding to IRQ
  xen: events: assume PHYSDEVOP_get_free_pirq exists
  xen: pci: collapse apic_register_gsi_xen_hvm and xen_hvm_register_pirq
  xen: events: return irq from xen_allocate_pirq_msi
  xen: events: drop XEN_ALLOC_IRQ flag to xen_allocate_pirq_msi
  xen: events: do not leak IRQ from xen_allocate_pirq_msi when no pirq available.
  xen: pci: only define xen_initdom_setup_msi_irqs if CONFIG_XEN_DOM0
2011-03-15 10:47:56 -07:00
Linus Torvalds
397fae0818 Merge branches 'stable/irq.rework' and 'stable/pcifront-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/irq.rework' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/irq: Cleanup up the pirq_to_irq for DomU PV PCI passthrough guests as well.
  xen: Use IRQF_FORCE_RESUME
  xen/timer: Missing IRQF_NO_SUSPEND in timer code broke suspend.
  xen: Fix compile error introduced by "switch to new irq_chip functions"
  xen: Switch to new irq_chip functions
  xen: Remove stale irq_chip.end
  xen: events: do not free legacy IRQs
  xen: events: allocate GSIs and dynamic IRQs from separate IRQ ranges.
  xen: events: add xen_allocate_irq_{dynamic, gsi} and xen_free_irq
  xen:events: move find_unbound_irq inside CONFIG_PCI_MSI
  xen: handled remapped IRQs when enabling a pcifront PCI device.
  genirq: Add IRQF_FORCE_RESUME

* 'stable/pcifront-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  pci/xen: When free-ing MSI-X/MSI irq->desc also use generic code.
  pci/xen: Cleanup: convert int** to int[]
  pci/xen: Use xen_allocate_pirq_msi instead of xen_allocate_pirq
  xen-pcifront: Sanity check the MSI/MSI-X values
  xen-pcifront: don't use flush_scheduled_work()
2011-03-15 10:47:16 -07:00
Linus Torvalds
c7146dd009 Merge branches 'stable/p2m-identity.v4.9.1' and 'stable/e820' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/p2m-identity.v4.9.1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/m2p: Check whether the MFN has IDENTITY_FRAME bit set..
  xen/m2p: No need to catch exceptions when we know that there is no RAM
  xen/debug: WARN_ON when identity PFN has no _PAGE_IOMAP flag set.
  xen/debugfs: Add 'p2m' file for printing out the P2M layout.
  xen/setup: Set identity mapping for non-RAM E820 and E820 gaps.
  xen/mmu: WARN_ON when racing to swap middle leaf.
  xen/mmu: Set _PAGE_IOMAP if PFN is an identity PFN.
  xen/mmu: Add the notion of identity (1-1) mapping.
  xen: Mark all initial reserved pages for the balloon as INVALID_P2M_ENTRY.

* 'stable/e820' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/e820: Don't mark balloon memory as E820_UNUSABLE when running as guest and fix overflow.
  xen/setup: Inhibit resource API from using System RAM E820 gaps as PCI mem gaps.
2011-03-15 10:32:15 -07:00
Daniel Kiper
95d2ac4a0c xen/balloon: Protect against CPU exhaust by event/x process
Protect against CPU exhaust by event/x process during
errors by adding some delays in scheduling next event
and retry count limit.

Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-14 11:34:21 -04:00
Daniel Kiper
95170b2e23 xen/balloon: Migration from mod_timer() to schedule_delayed_work()
Migration from mod_timer() to schedule_delayed_work().

Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-14 11:34:20 -04:00
Daniel Kiper
06f521d5d6 xen/balloon: Removal of driver_pages
Removal of driver_pages (I do not have seen any references to it).

Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-14 11:34:19 -04:00
Ian Campbell
a7b807ce8c xen: events: correct locking in xen_irq_from_pirq
One of those spin_lock() calls should be an unlock...

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-14 10:53:02 -04:00
Ian Campbell
7bee976822 xen: events: propagate irq allocation failure instead of panicking
Running out of IRQs need not be fatal to the machine as a whole.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-10 14:48:45 -05:00
Ian Campbell
6cb9bf3aaf xen: events: do not workaround too-small nr_irqs
With the introduction of e7bcecb7b1 "genirq: Make nr_irqs runtime expandable"
nr_irqs can grow as necessary to accommodate our allocation requests.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-10 14:48:44 -05:00
Ian Campbell
69c358ce37 xen: events: remove use of nr_irqs as upper bound on number of pirqs
There isn't really much relationship between the two, other than
nr_irqs often being the larger of the two.

Allows us to remove a nr_irqs sized array, the only users of this
array are MSI setup and restore, neither of which are particularly
performance critical.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-10 14:48:43 -05:00
Ian Campbell
ca62ce8cde xen: events: dynamically allocate irq info structures
Removes nr_irq sized array allocation at start of day.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-10 14:48:42 -05:00
Ian Campbell
6cb6537d34 xen: events: maintain a list of Xen interrupts
In a PVHVM kernel not all interrupts are Xen interrupts (APIC interrupts can also be present).

Currently we get away with walking over all interrupts because the
lookup in the irq_info array simply returns IRQT_UNBOUND and we ignore
it. However this array will be going away in a future patch so we need
to manually track which interrupts have been allocated by the Xen
events infrastructure.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-10 14:48:41 -05:00
Ian Campbell
3d4cfa3736 xen: events: push setup of irq<->{evtchn,ipi,virq,pirq} maps into irq_info init functions
Encapsulate setup of XXX_to_irq array in the relevant
xen_irq_info_*_init function.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-10 14:48:40 -05:00
Ian Campbell
9158c3588a xen: events: turn irq_info constructors into initialiser functions
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-10 14:48:39 -05:00
Ian Campbell
cb60d11427 xen: events: use per-cpu variable for cpu_evtchn_mask
I can't see any reason why it isn't already.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-10 14:48:38 -05:00
Ian Campbell
f4d0635bf8 xen: events: refactor GSI pirq bindings functions
Following the example set by xen_allocate_pirq_msi and
xen_bind_pirq_msi_to_irq:

xen_allocate_pirq becomes xen_allocate_pirq_gsi and now only allocates
a pirq number and does not bind it.

xen_map_pirq_gsi becomes xen_bind_pirq_gsi_to_irq and binds an
existing pirq.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-10 14:48:37 -05:00
Ian Campbell
0a85226ff2 xen: events: rename restore_cpu_pirqs -> restore_pirqs
There is nothing per-cpu about this function.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-10 14:48:36 -05:00
Ian Campbell
76465b2daf xen: events: remove unused public functions
I was unable to find any user of these functions in either the
functionality pending for 2.6.39 or the xen/next-2.6.32 branch of
xen.git

An exception to this was xen_gsi_from_irq which did appear to be used
in xen/next-2.6.32's pciback. However in the 2.6.39 version of pciback
xen_pirq_from_irq is, correctly AFAICT, used instead.

Only a minority of functions in events.h use "extern" so drop it from
those places for consistency.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-10 14:48:35 -05:00
Ian Campbell
a0e181167e xen: events: fix xen_map_pirq_gsi error return
Fix initial value of irq so that first goto out (if pirq or gsi
arguments are too large) actually returns an error.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-10 14:48:34 -05:00
Ian Campbell
653378acdd xen: events: simplify comment
It is never valid assume any particular relationship between a Xen
PIRQ number and and Linux IRQ number so there is no need to hedge when
saying so.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-10 14:48:33 -05:00
Ian Campbell
be49472f04 xen: events: separate two unrelated halves of if condition
Clarifies which bit the comment applies to.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-10 14:48:32 -05:00
Keir Fraser
3b7bcdf282 xen: events: Remove redundant clear of l2i at end of round-robin loop
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
[ijc: forward ported from linux-2.6.18-xen.hg 991:9ba6d9f3fbc0]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-10 14:47:59 -05:00
Keir Fraser
24b51c2f2d xen: events: Make round-robin scan fairer by snapshotting each l2 word once only
(except for starting l2 word, which we scan in two parts).

Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
[ijc: forward ported from linux-2.6.18-xen.hg 990:427276ac595d]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-10 14:47:58 -05:00
Keir Fraser
ada6814c87 xen: events: Clean up round-robin evtchn scan.
Also fixes a couple of boundary cases.

Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
[ijc: forward ported from linux-2.6.18-xen.hg 988:c88a02a22a05]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-10 14:47:57 -05:00
Ian Campbell
f1f4a323d4 xen: events: Make last processed event channel a per-cpu variable.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
[ijc: forward ported from linux-2.6.18-xen.hg 325:b2768401db94]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-10 14:47:56 -05:00
Scott Rixner
ab7f863e41 xen: events: Process event channels notifications in round-robin order.
Avoids fairness issue resulting from domain 0 processing lowest
numbered event channel first.

Fixes bug #1115 "Event channel port scanning unfair".

Bugzilla: http://bugzilla.xensource.com/bugzilla/show_bug.cgi?id=1115
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
[ijc: forward ported from linux-2.6.18-xen.hg 324:7fe1c6d02a2b
 various variables have different names in this tree:
  l1  -> pending_words
  l2  -> pending_bits
  l1i -> word_idx
  l2i -> bit_idx]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-10 14:47:55 -05:00
Ian Campbell
71eef7d1e3 xen: events: remove dom0 specific xen_create_msi_irq
The function name does not distinguish it from xen_allocate_pirq_msi
(which operates on domU and pvhvm domains rather than dom0).

Hoist domain 0 specific functionality up into the only caller leaving
functionality common to all guest types in xen_bind_pirq_msi_to_irq.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-10 14:44:45 -05:00
Ian Campbell
ca1d8fe952 xen: events: use xen_bind_pirq_msi_to_irq from xen_create_msi_irq
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-10 14:44:44 -05:00
Ian Campbell
f420e010ed xen: events: push set_irq_msi down into xen_create_msi_irq
Makes the tail end of this function look even more like
xen_bind_pirq_msi_to_irq.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-10 14:44:43 -05:00
Ian Campbell
2e55288f63 xen: events: update pirq_to_irq in xen_create_msi_irq
I don't think this was a deliberate ommision.

Makes the tail end of this function look even more like
xen_bind_pirq_msi_to_irq.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-10 14:44:42 -05:00
Ian Campbell
8135591e90 xen: events: refactor xen_create_msi_irq slightly
Calling PHYSDEVOP_map_pirq earlier simplifies error handling and
starts to make the tail end of this function look like
xen_bind_pirq_msi_to_irq.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-10 14:44:41 -05:00
Ian Campbell
bf480d952b xen: events: separate MSI PIRQ allocation from PIRQ binding to IRQ
Split the binding aspect of xen_allocate_pirq_msi out into a new
xen_bind_pirq_to_irq function.

In xen_hvm_setup_msi_irq when allocating a pirq write the MSI message
to signal the PIRQ as soon as the pirq is obtained. There is no way to
free the pirq back so if the subsequent binding to an IRQ fails we
want to ensure that we will reuse the PIRQ next time rather than leak
it.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-10 14:44:40 -05:00
Ian Campbell
5cad61a6ba xen: events: assume PHYSDEVOP_get_free_pirq exists
The find_unbound_pirq is called only from xen_allocate_pirq_msi and
only if alloc_pirq is true. The only caller which does this is
xen_hvm_setup_msi_irqs. The use of this function is gated, in
pci_xen_hvm_init, on XENFEAT_hvm_pirqs.

The PHYSDEVOP_get_free_pirq interfaces was added to the hypervisor in
22410:be96f6058c05 while XENFEAT_hvm_pirqs was added a couple of
minutes prior in 22409:6663214f06ac. Therefore we do not need to
concern ourselves with hypervisors which support XENFEAT_hvm_pirqs but
not PHYSDEVOP_get_free_pirq.

This eliminates the fallback path in find_unbound_pirq which walks to
pirq_to_irq array looking for a free pirq. Unlike the
PHYSDEVOP_get_free_pirq interface this fallback only looks up a free
pirq but does not reserve it. Removing this fallback will simplify
locking in the future.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-10 14:44:39 -05:00
Ian Campbell
4b41df7f6e xen: events: return irq from xen_allocate_pirq_msi
consistent with other similar functions.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-10 14:44:37 -05:00
Ian Campbell
bb5d079aef xen: events: drop XEN_ALLOC_IRQ flag to xen_allocate_pirq_msi
All callers pass this flag so it is pointless.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-10 14:44:35 -05:00
Ian Campbell
ae1635b05f xen: events: do not leak IRQ from xen_allocate_pirq_msi when no pirq available.
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: xen-devel@lists.xensource.com
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-10 14:44:34 -05:00
Konrad Rzeszutek Wilk
8054c3634c Merge branch 'stable/irq.rework' into stable/irq.cleanup
* stable/irq.rework:
  xen/irq: Cleanup up the pirq_to_irq for DomU PV PCI passthrough guests as well.
  xen: Use IRQF_FORCE_RESUME
  xen/timer: Missing IRQF_NO_SUSPEND in timer code broke suspend.
  xen: Fix compile error introduced by "switch to new irq_chip functions"
  xen: Switch to new irq_chip functions
  xen: Remove stale irq_chip.end
  xen: events: do not free legacy IRQs
  xen: events: allocate GSIs and dynamic IRQs from separate IRQ ranges.
  xen: events: add xen_allocate_irq_{dynamic, gsi} and xen_free_irq
  xen:events: move find_unbound_irq inside CONFIG_PCI_MSI
  xen: handled remapped IRQs when enabling a pcifront PCI device.
  genirq: Add IRQF_FORCE_RESUME
2011-03-10 14:41:43 -05:00
Daniel De Graaf
d79647aea2 xen/gntdev,gntalloc: Remove unneeded VM flags
The only time when granted pages need to be treated specially is when
using Xen's PTE modification for grant mappings owned by another domain
(that is, only gntdev on PV guests).  Otherwise, the area does not
require VM_DONTCOPY and VM_PFNMAP, since it can be accessed just like
any other page of RAM.

Since the vm_operations_struct close operations decrement reference
counts, a corresponding open function that increments them is required
now that it is possible to have multiple references to a single area.

We are careful in the gntdev to check if we can remove those flags. The
reason that we need to be careful in gntdev on PV guests is because we are
not changing the PFN/MFN mapping on PV; instead, we change the application's
page tables to point to the other domain's memory. This means that the vma
cannot be copied without using another grant mapping hypercall; it also
requires special handling on unmap, which is the reason for gntdev's
dependency on the MMU notifier.

For gntalloc, this is not a concern - the pages are owned by the domain
using the gntalloc device, and can be mapped and unmapped in the same manner
as any other page of memory.

Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[v2: Added in git commit "We are.." from email correspondence]
2011-03-09 22:15:28 -05:00
Ian Campbell
38eaeb0fd8 xen: gntdev: fix build warning
addr is actually a virtual address so use an unsigned long. Fixes:

  CC      drivers/xen/gntdev.o
drivers/xen/gntdev.c: In function 'map_grant_pages':
drivers/xen/gntdev.c:268: warning: cast from pointer to integer of different size

Reduce the scope of the variable at the same time.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-09 19:59:19 -05:00
Ian Campbell
dc4972a4e2 xen/p2m/m2p/gnttab: do not add failed grant maps to m2p override
The caller will not undo a mapping which failed and therefore the
override will not be removed.

This is especially bad in the case of GNTMAP_contains_pte mapping type
mappings where m2p_add_override will destroy the kernel mapping of the
page.

This was observed via a failure of map_grant_pages in gntdev_mmap (due
to userspace using a bad grant reference), which left the page in
question unmapped (because it was a GNTMAP_contains_pte mapping) which
led to a crash later on.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-09 19:59:10 -05:00
Konrad Rzeszutek Wilk
1aa0b51a03 xen/irq: Cleanup up the pirq_to_irq for DomU PV PCI passthrough guests as well.
We only did this for PV guests that are xen_initial_domain() but
there is not reason not to do this for other cases. The other
case is only exercised when you pass in a PCI device to a PV guest
_and_ the device in question.

Reviewed-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-03 12:02:22 -05:00
Thomas Gleixner
676dc3cf5b xen: Use IRQF_FORCE_RESUME
Mark the IRQF_NO_SUSPEND interrupts IRQF_FORCE_RESUME and remove the extra
walk through the interrupt descriptors.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-03 12:02:21 -05:00
Ian Campbell
aa673c1cb3 xen: Fix compile error introduced by "switch to new irq_chip functions"
drivers/xen/events.c: In function 'ack_pirq':
drivers/xen/events.c:568: error: implicit declaration of function 'irq_move_irq'

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-03 12:00:30 -05:00
Thomas Gleixner
c9e265e030 xen: Switch to new irq_chip functions
Convert Xen to the new irq_chip functions. Brings us closer to enable
CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-03 12:00:29 -05:00
Thomas Gleixner
149f256f8c xen: Remove stale irq_chip.end
irq_chip.end got obsolete with the removal of __do_IRQ()

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-03 12:00:28 -05:00
Ian Campbell
7214610475 xen: events: do not free legacy IRQs
c514d00c8057 "xen: events: add xen_allocate_irq_{dynamic, gsi} and
xen_free_irq" correctly avoids reallocating legacy IRQs (which are
managed by the arch core) but erroneously did not prevent them being
freed.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-03 12:00:27 -05:00
Ian Campbell
89911501f3 xen: events: allocate GSIs and dynamic IRQs from separate IRQ ranges.
There are three cases which we need to care about, PV guest, PV domain
0 and HVM guest.

The PV guest case is simple since it has no access to ACPI or real
APICs and therefore has no GSIs therefore we simply dynamically
allocate all IRQs. The potentially interesting case here is PIRQ type
event channels associated with passed through PCI devices. However
even in this case the guest has no direct interaction with the
physical GSI since that happens in the PCI backend.

The PV domain 0 and HVM guest cases are actually the same. In domain 0
case the kernel sees the host ACPI and GSIs (although it only sees the
APIC indirectly via the hypervisor) and in the HVM guest case it sees
the virtualised ACPI and emulated APICs. In these cases we start
allocating dynamic IRQs at nr_irqs_gsi so that they cannot clash with
any GSI.

Currently xen_allocate_irq_dynamic starts at nr_irqs and works
backwards looking for a free IRQ in order to (try and) avoid clashing
with GSIs used in domain 0 and in HVM guests. This change avoids that
although we retain the behaviour of allowing dynamic IRQs to encroach
on the GSI range if no suitable IRQs are available since a future IRQ
clash is deemed preferable to failure right now.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
2011-03-03 12:00:21 -05:00
Ian Campbell
c9df1ce585 xen: events: add xen_allocate_irq_{dynamic, gsi} and xen_free_irq
This is neater than open-coded calls to irq_alloc_desc_at and
irq_free_desc.

No intended behavioural change.

Note that we previously were not checking the return value of
irq_alloc_desc_at which would be failing for GSI<NR_IRQS_LEGACY
because the core architecture code has already allocated those for
us. Hence the additional check against NR_IRQS_LEGACY in
xen_allocate_irq_gsi.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
2011-03-03 11:56:59 -05:00
Ian Campbell
cbf6aa89fc xen:events: move find_unbound_irq inside CONFIG_PCI_MSI
The only caller is xen_allocate_pirq_msi which is also under this
ifdef so this fixes:
    drivers/xen/events.c:377: warning: 'find_unbound_pirq' defined but not used
when CONFIG_PCI_MSI=n

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
2011-03-03 11:56:58 -05:00
Konrad Rzeszutek Wilk
6eaa412f27 xen: Mark all initial reserved pages for the balloon as INVALID_P2M_ENTRY.
With this patch, we diligently set regions that will be used by the
balloon driver to be INVALID_P2M_ENTRY and under the ownership
of the balloon driver. We are OK using the __set_phys_to_machine
as we do not expect to be allocating any P2M middle or entries pages.
The set_phys_to_machine has the side-effect of potentially allocating
new pages and we do not want that at this stage.

We can do this because xen_build_mfn_list_list will have already
allocated all such pages up to xen_max_p2m_pfn.

We also move the check for auto translated physmap down the
stack so it is present in __set_phys_to_machine.

[v2: Rebased with mmu->p2m code split]
Reviewed-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-03 11:52:48 -05:00
Ian Campbell
2e820f58f7 xen/irq: implement bind_interdomain_evtchn_to_irqhandler for backend drivers
Impact: new Xen-internal API

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-28 09:39:37 -05:00
Ian Campbell
b056b6a014 xen: suspend: remove xen_hvm_suspend
It is now identical to xen_suspend, the differences are encapsulated
in the suspend_info struct.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-25 16:43:14 +00:00
Ian Campbell
55fb4acef7 xen: suspend: pull pre/post suspend hooks out into suspend_info
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-25 16:43:13 +00:00
Ian Campbell
07af38102f xen: suspend: move arch specific pre/post suspend hooks into generic hooks
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-25 16:43:13 +00:00
Ian Campbell
82043bb60d xen: suspend: refactor non-arch specific pre/post suspend hooks
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-25 16:43:12 +00:00
Ian Campbell
03c8142bd2 xen: suspend: add "arch" to pre/post suspend hooks
xen_pre_device_suspend is unused on ia64.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-25 16:43:12 +00:00
Ian Campbell
36b401e2c2 xen: suspend: pass extra hypercall argument via suspend_info struct
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-25 16:43:11 +00:00
Ian Campbell
ceb1802947 xen: suspend: refactor cancellation flag into a structure
Will add extra fields in subsequent patches.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-25 16:43:11 +00:00
Ian Campbell
bd1c0ad284 xen: suspend: use HYPERVISOR_suspend for PVHVM case instead of open coding
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-25 16:43:11 +00:00
Ian Campbell
552717231e xen: do not respond to unknown xenstore control requests
The PV xenbus control/shutdown node is written by the toolstack as a
request to the guest to perform a particular action (shutdown, reboot,
suspend etc). The guest is expected to acknowledge that it will
complete a request by clearing the control node.

Previously it would acknowledge any request, even if it did not know
what to do with it. Specifically in the case where CONFIG_PM_SLEEP is
not enabled the kernel would acknowledge a suspend request even though
it was not actually going to do anything.

Instead make the kernel only acknowledge requests if it is actually
going to do something with it. This will improve the toolstack's
ability to diagnose and deal with failures.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-25 16:43:09 +00:00
Stefano Stabellini
53d5522cad xen: make the ballon driver work for hvm domains
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2011-02-25 16:43:05 +00:00
Stefano Stabellini
702d4eb9b3 xen: no need to delay xen_setup_shutdown_event for hvm guests anymore
Now that xenstore_ready is used correctly for PV on HVM guests too, we
don't need to delay the initialization of xen_setup_shutdown_event
anymore.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
2011-02-25 16:43:03 +00:00
Daniel De Graaf
f4ee4af447 xen-gntdev: Add cast to pointer
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-23 10:10:34 -05:00
Daniel De Graaf
77c35acb7c xen-gntdev: Fix incorrect use of zero handle
The handle with numeric value 0 is a valid map handle, so it cannot
be used to indicate that a page has not been mapped. Use -1 instead.

Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-23 10:10:34 -05:00
Ian Campbell
8dd38383a5 xen: suspend and resume system devices when running PVHVM
Otherwise we fail to properly suspend/resume all of the emulated devices.

Something between 2.6.38-rc2 and rc3 appears to have exposed this
issue, but it's always been wrong not to do this.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
2011-02-17 10:31:20 +00:00
Stefano Stabellini
1f169f66dd xen: change xen/[gntdev/gntalloc] to default m
When CONFIG_XEN is enabled the gntdev and gntalloc driver will be
compiled as a module by default.

[v2: Added the fix for the gntalloc driver as well]

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-16 09:30:02 -05:00
Daniel De Graaf
9960be970c xen-gntdev: prevent using UNMAP_NOTIFY_CLEAR_BYTE on read-only mappings
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-14 14:16:23 -05:00
Daniel De Graaf
12996fc38a xen-gntdev: Avoid double-mapping memory
If an already-mapped area of the device was mapped into userspace a
second time, a hypercall was incorrectly made to remap the memory
again. Avoid the hypercall on later mmap calls, and fail the mmap call
if a writable mapping is attempted on a read-only range.

Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-14 14:16:22 -05:00
Daniel De Graaf
b57c18694e xen-gntdev: Avoid unmapping ranges twice
In paravirtualized domains, mn_invl_page or mn_invl_range_start can
unmap a segment of a mapped region without unmapping all pages. When
the region is later released, the pages will be unmapped twice, leading
to an incorrect -EINVAL return.

Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-14 14:16:21 -05:00
Daniel De Graaf
84e4075d60 xen-gntdev: Use map->vma for checking map validity
The is_mapped flag used to be set at the completion of the map operation,
but was not checked in all error paths. Use map->vma instead, which will
now be cleared if the initial grant mapping fails.

Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-14 14:16:20 -05:00
Daniel De Graaf
0ea22f072f xen-gntdev: Fix unmap notify on PV domains
In paravirtualized guests, the struct page* for mappings is only a
placeholder, and cannot be used to access the granted memory. Use the
userspace mapping that we have set up in order to implement
UNMAP_NOTIFY_CLEAR_BYTE.

Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-14 14:16:19 -05:00
Daniel De Graaf
90b6f30548 xen-gntdev: Fix memory leak when mmap fails
The error path did not decrement the reference count of the grant structure.

Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-14 14:16:18 -05:00
Daniel De Graaf
bdc612dc69 xen/gntalloc,gntdev: Add unmap notify ioctl
This ioctl allows the users of a shared page to be notified when
the other end exits abnormally.

[v2: updated description in structs]
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-14 14:16:17 -05:00
Daniel De Graaf
dd3140588d xen-gntalloc: Userspace grant allocation driver
This allows a userspace application to allocate a shared page for
implementing inter-domain communication or device drivers. These
shared pages can be mapped using the gntdev device or by the kernel
in another domain.

Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-14 14:16:17 -05:00
Daniel De Graaf
aab8f11a6b xen-gntdev: Support mapping in HVM domains
HVM does not allow direct PTE modification, so instead we request
that Xen change its internal p2m mappings on the allocated pages and
map the memory into userspace normally.

Note:
The HVM path for map and unmap is slightly different: HVM keeps the pages
mapped until the area is deleted, while the PV case (use_ptemod being true)
must unmap them when userspace unmaps the range. In the normal use case,
this makes no difference to users since unmap time is deletion time.

[v2: Expanded commit descr.]
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-14 14:15:55 -05:00
Daniel De Graaf
68b025c813 xen-gntdev: Add reference counting to maps
This allows userspace to perform mmap() on the gntdev device and then
immediately close the filehandle or remove the mapping using the
remove ioctl, with the mapped area remaining valid until unmapped.
This also fixes an infinite loop when a gntdev device is closed
without first unmapping all areas.

Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-14 14:08:51 -05:00
Daniel De Graaf
a879211bf1 xen-gntdev: Use find_vma rather than iterating our vma list manually
This should be faster if many mappings exist, and also removes
the only user of map->vma not related to PTE modification.

Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-14 14:08:50 -05:00
Daniel De Graaf
ef91082e90 xen-gntdev: Change page limit to be global instead of per-open
Because there is no limitation on how many times a user can open a
given device file, an per-file-description limit on the number of
pages granted offers little to no benefit. Change to a global limit
and remove the ioctl() as the parameter can now be changed via sysfs.

Xen tools changeset 22768:f8d801e5573e is needed to eliminate the
error this change produces in xc_gnttab_set_max_grants.

Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-14 14:08:49 -05:00
Ian Campbell
b052181a98 xen: events: mark cpu_evtchn_mask_p as __refdata
This variable starts out pointing at init_evtchn_mask which is marked
__initdata but is set to point to a non-init data region in xen_init_IRQ
which is itself an __init function so this is safe.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Tested-and-acked-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-11 14:46:25 -05:00
Linus Torvalds
67290f41b2 Merge branch 'xen/xenbus' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen
* 'xen/xenbus' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
  xenbus: Fix memory leak on release
  xenbus: avoid zero returns from read()
  xenbus: add missing wakeup in concurrent read/write
  xenbus: allow any xenbus command over /proc/xen/xenbus
  xenfs/xenbus: report partial reads/writes correctly
2011-01-20 16:37:28 -08:00
Linus Torvalds
9c4bc1c2be Merge branch 'stable/gntdev' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/gntdev' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/p2m: Fix module linking error.
  xen p2m: clear the old pte when adding a page to m2p_override
  xen gntdev: use gnttab_map_refs and gnttab_unmap_refs
  xen: introduce gnttab_map_refs and gnttab_unmap_refs
  xen p2m: transparently change the p2m mappings in the m2p override
  xen/gntdev: Fix circular locking dependency
  xen/gntdev: stop using "token" argument
  xen: gntdev: move use of GNTMAP_contains_pte next to the map_op
  xen: add m2p override mechanism
  xen: move p2m handling to separate file
  xen/gntdev: add VM_PFNMAP to vma
  xen/gntdev: allow usermode to map granted pages
  xen: define gnttab_set_map_op/unmap_op

Fix up trivial conflict in drivers/xen/Kconfig
2011-01-13 18:46:48 -08:00
Linus Torvalds
2c0076d8c7 Merge branch 'stable/platform-pci-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/platform-pci-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen-platform: Fix compile errors if CONFIG_PCI is not enabled.
  xen: rename platform-pci module to xen-platform-pci.
  xen-platform: use PCI interfaces to request IO and MEM resources.
2011-01-13 18:44:52 -08:00
Konrad Rzeszutek Wilk
e528db5b39 xen-platform: Fix compile errors if CONFIG_PCI is not enabled.
drivers/xen/platform-pci.c:127: error: implicit declaration of function
          'pci_request_region'
drivers/xen/platform-pci.c:165: error: implicit declaration of function
          'pci_release_region'

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-12 12:58:17 -05:00
Linus Torvalds
94d4c4cd56 Merge branch 'stable/xenbus' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/xenbus' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/xenbus: making backend support modular is too complex
  xen/pci: Make xen-pcifront be dependent on XEN_XENBUS_FRONTEND
  xen/xenbus: fixup checkpatch issues in xenbus_probe*
  xen/netfront: select XEN_XENBUS_FRONTEND
  xen/xenbus: clean up noise in xenbus_probe_frontend.c
  xen/xenbus: clean up noise in xenbus_probe_backend.c
  xen/xenbus: clean up noise in xenbus_probe.c
  xen/xenbus: cleanup debug noise in xenbus_comms.c
  xen/xenbus: clean up error handling
  xen/xenbus: make frontend bus GPL
  xen/xenbus: make sure backend bus is registered earlier
  xenbus/frontend: register bus earlier
  xen: remove xen/evtchn.h
  xen: add backend driver support
  xen: separate out frontend xenbus
2011-01-12 08:37:35 -08:00
Ian Campbell
7c8c06c5bb xen: rename platform-pci module to xen-platform-pci.
platform-pci is rather generic for a modular distro style kernel.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-12 10:28:06 -05:00
Ian Campbell
00f28e4037 xen-platform: use PCI interfaces to request IO and MEM resources.
This is the correct interface to use and something has broken the use
of the previous incorrect interface (which fails because the request
conflicts with the resources assigned for the PCI device itself
instead of nesting like the PCI interfaces do).

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: stable@kernel.org # 2.6.37 only
2011-01-12 10:28:01 -05:00
Jeremy Fitzhardinge
87f1d40a70 xen p2m: clear the old pte when adding a page to m2p_override
When adding a page to m2p_override we change the p2m of the page so we
need to also clear the old pte of the kernel linear mapping because it
doesn't correspond anymore.

When we remove the page from m2p_override we restore the original p2m of
the page and we also restore the old pte of the kernel linear mapping.

Before changing the p2m mappings in m2p_add_override and
m2p_remove_override, check that the page passed as argument is valid and
return an error if it is not.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-11 14:32:14 -05:00
Stefano Stabellini
a12b4eb34b xen gntdev: use gnttab_map_refs and gnttab_unmap_refs
Use gnttab_map_refs and gnttab_unmap_refs to map and unmap the grant
ref, so that we can have a corresponding struct page.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-11 14:32:06 -05:00
Stefano Stabellini
289b777eac xen: introduce gnttab_map_refs and gnttab_unmap_refs
gnttab_map_refs maps some grant refs and uses the new m2p override to
set a proper m2p mapping for the granted pages.

gnttab_unmap_refs unmaps the granted refs and removes th mappings from
the m2p override.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-11 14:32:00 -05:00
Daniel De Graaf
f0a70c882e xen/gntdev: Fix circular locking dependency
apply_to_page_range will acquire PTE lock while priv->lock is held,
and mn_invl_range_start tries to acquire priv->lock with PTE already
held.  Fix by not holding priv->lock during the entire map operation.
This is safe because map->vma is set nonzero while the lock is held,
which will cause subsequent maps to fail and will cause the unmap
ioctl (and other users of gntdev_del_map) to return -EBUSY until the
area is unmapped. It is similarly impossible for gntdev_vma_close to
be called while the vma is still being created.

Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-11 14:31:47 -05:00
Jeremy Fitzhardinge
ba5d101229 xen/gntdev: stop using "token" argument
It's the struct page of the L1 pte page.  But we can get its mfn
by simply doing an arbitrary_virt_to_machine() on it anyway (which is
the safe conservative choice; since we no longer allow HIGHPTE pages,
we would never expect to be operating on a mapped pte page).

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-11 14:31:41 -05:00
Ian Campbell
9329e7604f xen: gntdev: move use of GNTMAP_contains_pte next to the map_op
This flag controls the meaning of gnttab_map_grant_ref.host_addr and
specifies that the field contains a reference to the pte entry to be
used to perform the mapping. Therefore move the use of this flag to
the point at which we actually use a reference to the pte instead of
something else, splitting up the usage of the flag in this way is
confusing and potentially error prone.

The other flags are all properties of the mapping itself as opposed to
properties of the hypercall arguments and therefore it make sense to
continue to pass them round in map->flags.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Stefano Stabellini <Stefano.Stabellini@eu.citrix.com>
Cc: Derek G. Murray <Derek.Murray@cl.cam.ac.uk>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-11 14:31:26 -05:00
Jeremy Fitzhardinge
8d3eaea246 xen/gntdev: add VM_PFNMAP to vma
These pages are from other domains, so don't have any local PFN.
VM_PFNMAP is the closest concept Linux has to this.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-11 14:31:00 -05:00
Gerd Hoffmann
ab31523c2f xen/gntdev: allow usermode to map granted pages
The gntdev driver allows usermode to map granted pages from other
domains.  This is typically used to implement a Xen backend driver
in user mode.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefano Stabellini <Stefano.Stabellini@eu.citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-11 14:30:52 -05:00
Linus Torvalds
9f99a2f0e4 Merge branch 'stable/bug-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/bug-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/event: validate irq before get evtchn by irq
  xen/fb: fix potential memory leak
  xen/fb: fix xenfb suspend/resume race.
  xen: disable ACPI NUMA for PV guests
  xen/irq: Cleanup the find_unbound_irq
2011-01-10 08:48:46 -08:00
Joe Jin
110e7c7e4f xen/event: validate irq before get evtchn by irq
When retrieving the event channel number from irq, the irq
number may not be valid under some conditions.

So far that can be when we suspend/resume and irq ends with -1.
Validate and return sanitized irq and provide diagnostics information.

[v3: added unlikely on the WARN path]
[v2: reworded the commit message]
Signed-off-by: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Gurudas Pai <gurudas.pai@oracle.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
2011-01-10 10:46:32 -05:00
Jeremy Fitzhardinge
329620a878 xen/xenbus: making backend support modular is too complex
Impact: build fix

Making the xenbus backend support a separate module is needlessly complex
and causes build failures.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-05 16:31:16 -05:00
Ian Campbell
6bac7f9f9e xen/xenbus: fixup checkpatch issues in xenbus_probe*
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-05 16:31:08 -05:00
Jeremy Fitzhardinge
0ff4fdf065 xen/xenbus: clean up noise in xenbus_probe_frontend.c
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
[corresponds to 616ff7a06a3f in git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-05 16:30:56 -05:00
Jeremy Fitzhardinge
b5d33d088f xen/xenbus: clean up noise in xenbus_probe_backend.c
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
[corresponds to 98b833aaf81e in git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-05 16:30:51 -05:00
Jeremy Fitzhardinge
a39bda27b3 xen/xenbus: clean up noise in xenbus_probe.c
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
[corresponds to 01aded30aaef in git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-05 16:30:46 -05:00
Jeremy Fitzhardinge
a16448e071 xen/xenbus: cleanup debug noise in xenbus_comms.c
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
[corresponds to 6796c12281dc in git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-05 16:30:42 -05:00
Jeremy Fitzhardinge
7432e4bd0b xen/xenbus: clean up error handling
Don't report errors when booting on non-Xen, because its just confusing.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
[corresponds to 8aa08376d6aa in git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-05 16:30:37 -05:00
Jeremy Fitzhardinge
1b31a14345 xen/xenbus: make frontend bus GPL
Make sure frontend xenbus has a GPL module license, so it can access
all the xenbus symbols exported GPL only.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
[corresponds to 525cbc8adcb5 in git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-05 16:30:31 -05:00
Jeremy Fitzhardinge
c3676e8462 xen/xenbus: make sure backend bus is registered earlier
Impact: bugfix

Need to register it before any drivers want to attach.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
[corresponds to a7a9c3a942c6 in git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-05 16:30:24 -05:00
Jeremy Fitzhardinge
806f5463d2 xenbus/frontend: register bus earlier
Impact: bugfix

Make sure the frontend bus is registered early, before
any drivers want to attach.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
[corresponds to 1d5df318f87f in git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-05 16:30:18 -05:00
Jeremy Fitzhardinge
74c2ee9838 xen: remove xen/evtchn.h
Impact: cleanup

It's a usermode header for users of /dev/xen/evtchn.

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
[corresponds to b60e48cec12f in git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-05 16:30:04 -05:00
Ian Campbell
df660251eb xen: add backend driver support
Impact: backend device support

Add the basic machinery to support backend drivers.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
[corresponds to 79727b851bac in git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-05 16:29:58 -05:00
Ian Campbell
2de06cc1f1 xen: separate out frontend xenbus
Impact: refactor

Make a distinct frontend xenbus, in preparation for adding a backend xenbus.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
[corresponds to 2fd433a4188f in git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
 with adjustments to reflect changes in the code which is moved]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-05 16:29:17 -05:00
Daniel De Graaf
6a5b3beff9 xenbus: Fix memory leak on release
Pending responses were leaked on close.

Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-12-20 14:56:09 -08:00
Christoph Lameter
b2e4ae6975 xen: Use this_cpu_inc_return
__this_cpu_inc_return reduces code and simplifies code.

Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
2010-12-17 15:18:05 +01:00
Christoph Lameter
780f36d8b3 xen: Use this_cpu_ops
Use this_cpu_ops to reduce code size and simplify things in various places.

V3->V4:
	Move instance of this_cpu_inc_return to a later patchset so that
	this patch can be applied without infrastructure changes.

Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2010-12-17 15:07:19 +01:00
Konrad Rzeszutek Wilk
d1b758ebc2 xen/irq: Cleanup the find_unbound_irq
The "find_unbound_irq" is a bit unusual - it allocates
virtual IRQ (event channels) in reverse order. This means
starting at the "top" of the available IRQs (nr_irqs) down
to the GSI/MSI IRQs (nr_irqs_gsi). Lets document this and
also make the variables easier to understand.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-12-09 16:02:35 -05:00
Linus Torvalds
11e8896474 Merge branch '2.6.37-rc4-pvhvm-fixes' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm
* '2.6.37-rc4-pvhvm-fixes' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm:
  xen: unplug the emulated devices at resume time
  xen: fix save/restore for PV on HVM guests with pirq remapping
  xen: resume the pv console for hvm guests too
  xen: fix MSI setup and teardown for PV on HVM guests
  xen: use PHYSDEVOP_get_free_pirq to implement find_unbound_pirq
2010-12-03 11:30:57 -08:00
Linus Torvalds
8338fded13 Merge branches 'upstream/core' and 'upstream/bugfix' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen
* 'upstream/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
  xen: allocate irq descs on any NUMA node
  xen: prevent crashes with non-HIGHMEM 32-bit kernels with largeish memory
  xen: use default_idle
  xen: clean up "extra" memory handling some more

* 'upstream/bugfix' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
  xen: x86/32: perform initial startup on initial_page_table
  xen: don't bother to stop other cpus on shutdown/reboot
2010-12-03 10:08:52 -08:00
Jeremy Fitzhardinge
29dcbc5c25 xen: allocate irq descs on any NUMA node
Allocate irq descs on any NUMA node (we don't care) rather than
specifically node 0, which may not exist.

(At the moment NUMA is meaningless within a domain, so any info
the kernel has is just from an SRAT table we haven't suppressed/disabled.)

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-12-02 16:14:27 -08:00
Jeremy Fitzhardinge
2a4c92fa24 xen: prevent crashes with non-HIGHMEM 32-bit kernels with largeish memory
If this is a non-HIGHMEM 32-bit kernel, then the page structures only go
up to the limit of addressable memory, even if more memory is physically
present.  Don't try to add that extra memory to the balloon.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-12-02 15:30:06 -08:00
Stefano Stabellini
9a069c33c5 xen: fix save/restore for PV on HVM guests with pirq remapping
Re-map and re-bind all the pirqs at resume time.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2010-12-02 14:40:50 +00:00
Stefano Stabellini
6411fe69b8 xen: resume the pv console for hvm guests too
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2010-12-02 14:40:48 +00:00
Stefano Stabellini
af42b8d12f xen: fix MSI setup and teardown for PV on HVM guests
When remapping MSIs into pirqs for PV on HVM guests, qemu is responsible
for doing the actual mapping and unmapping.
We only give qemu the desired pirq number when we ask to do the mapping
the first time, after that we should be reading back the pirq number
from qemu every time we want to re-enable the MSI.

This fixes a bug in xen_hvm_setup_msi_irqs that manifests itself when
trying to enable the same MSI for the second time: the old MSI to pirq
mapping is still valid at this point but xen_hvm_setup_msi_irqs would
try to assign a new pirq anyway.
A simple way to reproduce this bug is to assign an MSI capable network
card to a PV on HVM guest, if the user brings down the corresponding
ethernet interface and up again, Linux would fail to enable MSIs on the
device.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2010-12-02 14:34:25 +00:00
Stefano Stabellini
e5fc734541 xen: use PHYSDEVOP_get_free_pirq to implement find_unbound_pirq
Use the new hypercall PHYSDEVOP_get_free_pirq to ask Xen to allocate a
pirq. Remove the unsupported PHYSDEVOP_get_nr_pirqs hypercall to get the
amount of pirq available.

This fixes find_unbound_pirq that otherwise would return a number
starting from nr_irqs that might very well be out of range in Xen.

The symptom of this bug is that when you passthrough an MSI capable pci
device to a PV on HVM guest, Linux would fail to enable MSIs on the
device.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2010-12-02 14:28:22 +00:00
Linus Torvalds
a4ec046c98 Merge branch 'upstream/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen
* 'upstream/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: (23 commits)
  xen/events: Use PIRQ instead of GSI value when unmapping MSI/MSI-X irqs.
  xen: set IO permission early (before early_cpu_init())
  xen: re-enable boot-time ballooning
  xen/balloon: make sure we only include remaining extra ram
  xen/balloon: the balloon_lock is useless
  xen: add extra pages to balloon
  xen: make evtchn's name less generic
  xen/evtchn: the evtchn device is non-seekable
  Revert "xen/privcmd: create address space to allow writable mmaps"
  xen/events: use locked set|clear_bit() for cpu_evtchn_mask
  xen/evtchn: clear secondary CPUs' cpu_evtchn_mask[] after restore
  xen/xenfs: update xenfs_mount for new prototype
  xen: fix header export to userspace
  xen: implement XENMEM_machphys_mapping
  xen: set vma flag VM_PFNMAP in the privcmd mmap file_op
  xen: xenfs: privcmd: check put_user() return code
  xen/evtchn: add missing static
  xen/evtchn: Fix name of Xen event-channel device
  xen/evtchn: don't do unbind_from_irqhandler under spinlock
  xen/evtchn: remove spurious barrier
  ...
2010-11-24 08:23:18 +09:00
Jeremy Fitzhardinge
9b8321531a Merge branches 'upstream/core', 'upstream/xenfs' and 'upstream/evtchn' into upstream/for-linus
* upstream/core:
  xen/events: Use PIRQ instead of GSI value when unmapping MSI/MSI-X irqs.
  xen: set IO permission early (before early_cpu_init())
  xen: re-enable boot-time ballooning
  xen/balloon: make sure we only include remaining extra ram
  xen/balloon: the balloon_lock is useless
  xen: add extra pages to balloon
  xen/events: use locked set|clear_bit() for cpu_evtchn_mask
  xen/evtchn: clear secondary CPUs' cpu_evtchn_mask[] after restore
  xen: implement XENMEM_machphys_mapping

* upstream/xenfs:
  Revert "xen/privcmd: create address space to allow writable mmaps"
  xen/xenfs: update xenfs_mount for new prototype
  xen: fix header export to userspace
  xen: set vma flag VM_PFNMAP in the privcmd mmap file_op
  xen: xenfs: privcmd: check put_user() return code

* upstream/evtchn:
  xen: make evtchn's name less generic
  xen/evtchn: the evtchn device is non-seekable
  xen/evtchn: add missing static
  xen/evtchn: Fix name of Xen event-channel device
  xen/evtchn: don't do unbind_from_irqhandler under spinlock
  xen/evtchn: remove spurious barrier
  xen/evtchn: ports start enabled
  xen/evtchn: dynamically allocate port_user array
  xen/evtchn: track enabled state for each port
2010-11-22 12:22:42 -08:00
Konrad Rzeszutek Wilk
1233471572 xen/events: Use PIRQ instead of GSI value when unmapping MSI/MSI-X irqs.
When we allocate a vector for MSI/MSI-X we save away the PIRQ, and the
vector value. When we unmap (de-allocate) the MSI/MSI-X vector(s) we
need to provide the PIRQ and the vector value. What we did instead
was to provide the GSI (which was zero) and the vector value, and we
got these unhappy error messages:

(XEN) irq.c:1575: dom0: pirq 0 not mapped
[    7.733415] unmap irq failed -22

This patches fixes this and we use the PIRQ value instead of the GSI
value.

CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-11-22 12:10:34 -08:00
Jeremy Fitzhardinge
66946f6767 xen/balloon: make sure we only include remaining extra ram
If the user specifies mem= on the kernel command line, some or all
of the extra memory E820 region may be clipped away, so make sure
we don't try to add more extra memory than exists in E820.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-19 22:18:26 -08:00
Jeremy Fitzhardinge
2f70e0acd4 xen/balloon: the balloon_lock is useless
The balloon_lock is useless, since it protects nothing against nothing.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-19 22:17:25 -08:00
Jeremy Fitzhardinge
9be4d45759 xen: add extra pages to balloon
Add extra pages in the pseudo-physical address space to the balloon
so we can extend into them later.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-19 22:15:59 -08:00
Ian Campbell
b5d827b641 xen: make evtchn's name less generic
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-18 23:44:44 -08:00
Jeremy Fitzhardinge
67cb405609 Merge branch 'xen/dev-evtchn' into upstream/evtchn
* xen/dev-evtchn:
  xen/evtchn: add missing static
  xen/evtchn: Fix name of Xen event-channel device
  xen/evtchn: don't do unbind_from_irqhandler under spinlock
  xen/evtchn: remove spurious barrier
  xen/evtchn: ports start enabled
  xen/evtchn: dynamically allocate port_user array
  xen/evtchn: track enabled state for each port
2010-11-18 22:43:38 -08:00
Jeremy Fitzhardinge
bc7fc5e33e xen/evtchn: the evtchn device is non-seekable
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-18 22:32:17 -08:00
Jeremy Fitzhardinge
9045d47ea3 Revert "xen/privcmd: create address space to allow writable mmaps"
This reverts commit 24a89b5be4.

We should no longer need an address space now that we're correctly
setting VM_PFNMAP on our vmas.

Conflicts:

	drivers/xen/xenfs/super.c

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-18 17:14:46 -08:00
Arnd Bergmann
451a3c24b0 BKL: remove extraneous #include <smp_lock.h>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-17 08:59:32 -08:00
Jeremy Fitzhardinge
e04195644e xen/events: use locked set|clear_bit() for cpu_evtchn_mask
The per-cpu event channel masks can be updated unlocked from multiple
CPUs, so use the locked variant.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-16 14:58:50 -08:00
Jan Beulich
1c6969ec8e xen/evtchn: clear secondary CPUs' cpu_evtchn_mask[] after restore
To bind all event channels to CPU#0, it is not sufficient to set all
of its cpu_evtchn_mask[] bits; all other CPUs also need to get their
bits cleared. Otherwise, evtchn_do_upcall() will start handling
interrupts on CPUs they're not intended to run on, which can be
particularly bad for per-CPU ones.

[ linux-2.6.18-xen.hg 7de7453dee36 ]

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-16 14:58:47 -08:00
Jeremy Fitzhardinge
fe61f1d737 xen/xenfs: update xenfs_mount for new prototype
.mount now returns a struct dentry *.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-16 11:06:46 -08:00
Jeremy Fitzhardinge
20b4755e4f Merge commit 'v2.6.37-rc2' into upstream/xenfs
* commit 'v2.6.37-rc2': (10093 commits)
  Linux 2.6.37-rc2
  capabilities/syslog: open code cap_syslog logic to fix build failure
  i2c: Sanity checks on adapter registration
  i2c: Mark i2c_adapter.id as deprecated
  i2c: Drivers shouldn't include <linux/i2c-id.h>
  i2c: Delete unused adapter IDs
  i2c: Remove obsolete cleanup for clientdata
  include/linux/kernel.h: Move logging bits to include/linux/printk.h
  Fix gcc 4.5.1 miscompiling drivers/char/i8k.c (again)
  hwmon: (w83795) Check for BEEP pin availability
  hwmon: (w83795) Clear intrusion alarm immediately
  hwmon: (w83795) Read the intrusion state properly
  hwmon: (w83795) Print the actual temperature channels as sources
  hwmon: (w83795) List all usable temperature sources
  hwmon: (w83795) Expose fan control method
  hwmon: (w83795) Fix fan control mode attributes
  hwmon: (lm95241) Check validity of input values
  hwmon: Change mail address of Hans J. Koch
  PCI: sysfs: fix printk warnings
  GFS2: Fix inode deallocation race
  ...
2010-11-16 11:06:22 -08:00
Linus Torvalds
891cbd30ef Merge branch 'upstream/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen
* 'upstream/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
  xen: do not release any memory under 1M in domain 0
  xen: events: do not unmask event channels on resume
  xen: correct size of level2_kernel_pgt
2010-11-12 16:01:55 -08:00
Stefano Stabellini
e060e7af98 xen: set vma flag VM_PFNMAP in the privcmd mmap file_op
Set VM_PFNMAP in the privcmd mmap file_op, rather than later in
xen_remap_domain_mfn_range when it is too late because
vma_wants_writenotify has already been called and vm_page_prot has
already been modified.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-11 12:37:43 -08:00
Ian Campbell
6903591f31 xen: events: do not unmask event channels on resume
The IRQ core code will take care of disabling and reenabling
interrupts over suspend resume automatically, therefore we do not need
to do this in the Xen event channel code.

The only exception is those event channels marked IRQF_NO_SUSPEND
which the IRQ core ignores. We must unmask these ourselves, taking
care to obey the current IRQ_DISABLED status. Failure check for
IRQ_DISABLED leads to enabling polled only event channels, such as
that associated with the pv spinlocks, which must never be enabled:

[   21.970432] ------------[ cut here ]------------
[   21.970432] kernel BUG at arch/x86/xen/spinlock.c:343!
[   21.970432] invalid opcode: 0000 [#1] SMP
[   21.970432] last sysfs file: /sys/devices/virtual/net/lo/operstate
[   21.970432] Modules linked in:
[   21.970432]
[   21.970432] Pid: 0, comm: swapper Not tainted (2.6.32.24-x86_32p-xen-01034-g787c727 #34)
[   21.970432] EIP: 0061:[<c102e209>] EFLAGS: 00010046 CPU: 3
[   21.970432] EIP is at dummy_handler+0x3/0x7
[   21.970432] EAX: 0000021c EBX: dfc16880 ECX: 0000001a EDX: 00000000
[   21.970432] ESI: dfc02c00 EDI: 00000001 EBP: dfc47e10 ESP: dfc47e10
[   21.970432]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0069
[   21.970432] Process swapper (pid: 0, ti=dfc46000 task=dfc39440 task.ti=dfc46000)
[   21.970432] Stack:
[   21.970432]  dfc47e30 c10a39f0 0000021c 00000000 00000000 dfc16880 0000021c 00000001
[   21.970432] <0> dfc47e40 c10a4f08 0000021c 00000000 dfc47e78 c12240a7 c1839284 c1839284
[   21.970432] <0> 00000200 00000000 00000000 f5720000 c1f3d028 c1f3d02c 00000180 dfc47e90
[   21.970432] Call Trace:
[   21.970432]  [<c10a39f0>] ? handle_IRQ_event+0x5f/0x122
[   21.970432]  [<c10a4f08>] ? handle_percpu_irq+0x2f/0x55
[   21.970432]  [<c12240a7>] ? __xen_evtchn_do_upcall+0xdb/0x15f
[   21.970432]  [<c122481e>] ? xen_evtchn_do_upcall+0x20/0x30
[   21.970432]  [<c1030d47>] ? xen_do_upcall+0x7/0xc
[   21.970432]  [<c102007b>] ? apic_reg_read+0xd3/0x22d
[   21.970432]  [<c1002227>] ? hypercall_page+0x227/0x1005
[   21.970432]  [<c102d30b>] ? xen_force_evtchn_callback+0xf/0x14
[   21.970432]  [<c102da7c>] ? check_events+0x8/0xc
[   21.970432]  [<c102da3b>] ? xen_irq_enable_direct_end+0x0/0x1
[   21.970432]  [<c105e485>] ? finish_task_switch+0x62/0xba
[   21.970432]  [<c14e3f84>] ? schedule+0x808/0x89d
[   21.970432]  [<c1084dc5>] ? hrtimer_start_expires+0x1a/0x22
[   21.970432]  [<c1085154>] ? tick_nohz_restart_sched_tick+0x15a/0x162
[   21.970432]  [<c102f43a>] ? cpu_idle+0x6d/0x6f
[   21.970432]  [<c14db29e>] ? cpu_bringup_and_idle+0xd/0xf
[   21.970432] Code: 5d 0f 95 c0 0f b6 c0 c3 55 66 83 78 02 00 89 e5 5d 0f 95 \
c0 0f b6 c0 c3 55 b2 01 86 10 31 c0 84 d2 89 e5 0f 94 c0 5d c3 55 89 e5 <0f> 0b \
eb fe 55 80 3d 4c ce 84 c1 00 89 e5 57 56 89 c6 53 74 15
[   21.970432] EIP: [<c102e209>] dummy_handler+0x3/0x7 SS:ESP 0069:dfc47e10
[   21.970432] ---[ end trace c0b71f7e12cf3011 ]---

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-10 17:19:25 -08:00
Vasiliy Kulikov
313e744121 xen: xenfs: privcmd: check put_user() return code
put_user() may fail.  In this case propagate error code from
privcmd_ioctl_mmap_batch().

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-29 11:02:25 -07:00
Al Viro
fc14f2fef6 convert get_sb_single() users
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29 04:16:28 -04:00
Linus Torvalds
18cb657ca1 Merge branch 'stable/xen-pcifront-0.8.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
and branch 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm

* 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm:
  xen: register xen pci notifier
  xen: initialize cpu masks for pv guests in xen_smp_init
  xen: add a missing #include to arch/x86/pci/xen.c
  xen: mask the MTRR feature from the cpuid
  xen: make hvc_xen console work for dom0.
  xen: add the direct mapping area for ISA bus access
  xen: Initialize xenbus for dom0.
  xen: use vcpu_ops to setup cpu masks
  xen: map a dummy page for local apic and ioapic in xen_set_fixmap
  xen: remap MSIs into pirqs when running as initial domain
  xen: remap GSIs as pirqs when running as initial domain
  xen: introduce XEN_DOM0 as a silent option
  xen: map MSIs into pirqs
  xen: support GSI -> pirq remapping in PV on HVM guests
  xen: add xen hvm acpi_register_gsi variant
  acpi: use indirect call to register gsi in different modes
  xen: implement xen_hvm_register_pirq
  xen: get the maximum number of pirqs from xen
  xen: support pirq != irq

* 'stable/xen-pcifront-0.8.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (27 commits)
  X86/PCI: Remove the dependency on isapnp_disable.
  xen: Update Makefile with CONFIG_BLOCK dependency for biomerge.c
  MAINTAINERS: Add myself to the Xen Hypervisor Interface and remove Chris Wright.
  x86: xen: Sanitse irq handling (part two)
  swiotlb-xen: On x86-32 builts, select SWIOTLB instead of depending on it.
  MAINTAINERS: Add myself for Xen PCI and Xen SWIOTLB maintainer.
  xen/pci: Request ACS when Xen-SWIOTLB is activated.
  xen-pcifront: Xen PCI frontend driver.
  xenbus: prevent warnings on unhandled enumeration values
  xenbus: Xen paravirtualised PCI hotplug support.
  xen/x86/PCI: Add support for the Xen PCI subsystem
  x86: Introduce x86_msi_ops
  msi: Introduce default_[teardown|setup]_msi_irqs with fallback.
  x86/PCI: Export pci_walk_bus function.
  x86/PCI: make sure _PAGE_IOMAP it set on pci mappings
  x86/PCI: Clean up pci_cache_line_size
  xen: fix shared irq device passthrough
  xen: Provide a variant of xen_poll_irq with timeout.
  xen: Find an unbound irq number in reverse order (high to low).
  xen: statically initialize cpu_evtchn_mask_p
  ...

Fix up trivial conflicts in drivers/pci/Makefile
2010-10-28 17:11:17 -07:00
Weidong Han
e28c31a96b xen: register xen pci notifier
Register a pci notifier to add (or remove) pci devices to Xen via
hypercalls. Xen needs to know the pci devices present in the system to
handle pci passthrough and even MSI remapping in the initial domain.

Signed-off-by: Weidong Han <weidong.han@intel.com>
Signed-off-by: Qing He <qing.he@intel.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2010-10-27 18:56:07 +01:00
Linus Torvalds
520045db94 Merge branches 'upstream/xenfs' and 'upstream/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen
* 'upstream/xenfs' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
  xen/privcmd: make privcmd visible in domU
  xen/privcmd: move remap_domain_mfn_range() to core xen code and export.
  privcmd: MMAPBATCH: Fix error handling/reporting
  xenbus: export xen_store_interface for xenfs
  xen/privcmd: make sure vma is ours before doing anything to it
  xen/privcmd: print SIGBUS faults
  xen/xenfs: set_page_dirty is supposed to return true if it dirties
  xen/privcmd: create address space to allow writable mmaps
  xen: add privcmd driver
  xen: add variable hypercall caller
  xen: add xen_set_domain_pte()
  xen: add /proc/xen/xsd_{kva,port} to xenfs

* 'upstream/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: (29 commits)
  xen: include xen/xen.h for definition of xen_initial_domain()
  xen: use host E820 map for dom0
  xen: correctly rebuild mfn list list after migration.
  xen: improvements to VIRQ_DEBUG output
  xen: set up IRQ before binding virq to evtchn
  xen: ensure that all event channels start off bound to VCPU 0
  xen/hvc: only notify if we actually sent something
  xen: don't add extra_pages for RAM after mem_end
  xen: add support for PAT
  xen: make sure xen_max_p2m_pfn is up to date
  xen: limit extra memory to a certain ratio of base
  xen: add extra pages for E820 RAM regions, even if beyond mem_end
  xen: make sure xen_extra_mem_start is beyond all non-RAM e820
  xen: implement "extra" memory to reserve space for pages not present at boot
  xen: Use host-provided E820 map
  xen: don't map missing memory
  xen: defer building p2m mfn structures until kernel is mapped
  xen: add return value to set_phys_to_machine()
  xen: convert p2m to a 3 level tree
  xen: make install_p2mtop_page() static
  ...

Fix up trivial conflict in arch/x86/xen/mmu.c, and fix the use of
'reserve_early()' - in the new memblock world order it is now
'memblock_x86_reserve_range()' instead. Pointed out by Jeremy.
2010-10-26 18:20:19 -07:00
Jeremy Fitzhardinge
4fe7d5a708 xen: make hvc_xen console work for dom0.
Use the console hypercalls for dom0 console.

[ Impact: Add Xen dom0 console ]
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-22 21:26:01 +01:00
Juan Quintela
b37a56d6f3 xen: Initialize xenbus for dom0.
Do initial xenbus/xenstore setup in dom0.  In dom0 we need to actually
allocate the xenstore resources, rather than being given them from
outside.

[ Impact: initialize Xenbus ]

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-22 21:25:45 +01:00
Qing He
f731e3ef02 xen: remap MSIs into pirqs when running as initial domain
Implement xen_create_msi_irq to create an msi and remap it as pirq.
Use xen_create_msi_irq to implement an initial domain specific version
of setup_msi_irqs.

Signed-off-by: Qing He <qing.he@intel.com>
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-22 21:25:44 +01:00
Jeremy Fitzhardinge
38aa66fcb7 xen: remap GSIs as pirqs when running as initial domain
Implement xen_register_gsi to setup the correct triggering and polarity
properties of a gsi.
Implement xen_register_pirq to register a particular gsi as pirq and
receive interrupts as events.
Call xen_setup_pirqs to register all the legacy ISA irqs as pirqs.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-22 21:25:43 +01:00
Stefano Stabellini
809f9267bb xen: map MSIs into pirqs
Map MSIs into pirqs, writing 0 in the MSI vector data field and the pirq
number in the MSI destination id field.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-22 21:25:43 +01:00
Stefano Stabellini
3942b740e5 xen: support GSI -> pirq remapping in PV on HVM guests
Disable pcifront when running on HVM: it is meant to be used with pv
guests that don't have PCI bus.

Use acpi_register_gsi_xen_hvm to remap GSIs into pirqs.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-22 21:25:42 +01:00
Stefano Stabellini
42a1de56f3 xen: implement xen_hvm_register_pirq
xen_hvm_register_pirq allows the kernel to map a GSI into a Xen pirq and
receive the interrupt as an event channel from that point on.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-22 21:25:41 +01:00
Stefano Stabellini
01557baff6 xen: get the maximum number of pirqs from xen
Use PHYSDEVOP_get_nr_pirqs to get the maximum number of pirqs from xen.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-22 21:25:40 +01:00
Stefano Stabellini
7a043f119c xen: support pirq != irq
PHYSDEVOP_map_pirq might return a pirq different from what we asked if
we are running as an HVM guest, so we need to be able to support pirqs
that are different from linux irqs.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-22 21:25:40 +01:00
Stefano Stabellini
67ba37293e Merge commit 'konrad/stable/xen-pcifront-0.8.2' into 2.6.36-rc8-initial-domain-v6 2010-10-22 21:24:06 +01:00
Ian Campbell
cb52e6d9ed xen: improvements to VIRQ_DEBUG output
* Fix bitmask formatting on 64 bit by specifying correct field widths.

* Output both global and local masked and pending information.

* Indicate in list of pending interrupts whether they are pending in
  the L2, masked globally and/or masked locally.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-22 12:57:35 -07:00
Jeremy Fitzhardinge
a52521f149 xen: set up IRQ before binding virq to evtchn
Make sure the irq is set up before binding a virq event channel to it.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-22 12:57:34 -07:00
Ian Campbell
b0097adeec xen: ensure that all event channels start off bound to VCPU 0
All event channels startbound to VCPU 0 so ensure that cpu_evtchn_mask
is initialised to reflect this. Otherwise there is a race after registering an
event channel but before the affinity is explicitly set where the event channel
can be delivered. If this happens then the event channel remains pending in the
L1 (evtchn_pending) array but is cleared in L2 (evtchn_pending_sel), this means
the event channel cannot be reraised until another event channel happens to
trigger the same L2 entry on that VCPU.

sizeof(cpu_evtchn_mask(0))==sizeof(unsigned long*) which is not correct, and
causes only the first 32 or 64 event channels (depending on architecture) to be
initially bound to VCPU0. Use sizeof(struct cpu_evtchn_s) instead.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: stable@kernel.org
2010-10-22 12:57:33 -07:00
Jeremy Fitzhardinge
3588fe2e3f xen/events: change to using fasteoi
Change event delivery to:
 - mask+clear event in the upcall function
 - use handle_fasteoi_irq as the handler
 - unmask in the eoi function (and handle migration)

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-22 12:57:21 -07:00
Linus Torvalds
092e0e7e52 Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  vfs: make no_llseek the default
  vfs: don't use BKL in default_llseek
  llseek: automatically add .llseek fop
  libfs: use generic_file_llseek for simple_attr
  mac80211: disallow seeks in minstrel debug code
  lirc: make chardev nonseekable
  viotape: use noop_llseek
  raw: use explicit llseek file operations
  ibmasmfs: use generic_file_llseek
  spufs: use llseek in all file operations
  arm/omap: use generic_file_llseek in iommu_debug
  lkdtm: use generic_file_llseek in debugfs
  net/wireless: use generic_file_llseek in debugfs
  drm: use noop_llseek
2010-10-22 10:52:56 -07:00
Jeremy Fitzhardinge
9387377eb7 xen/privcmd: make privcmd visible in domU
It has its uses in a domU as well as dom0.  Xen will prevent an
unprivileged domain from doing anything untoward.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-20 16:29:43 -07:00
Ian Campbell
de1ef2065c xen/privcmd: move remap_domain_mfn_range() to core xen code and export.
This allows xenfs to be built as a module, previously it required flush_tlb_all
and arbitrary_virt_to_machine to be exported.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-20 16:22:34 -07:00
Ian Campbell
f020e29051 privcmd: MMAPBATCH: Fix error handling/reporting
On error IOCTL_PRIVCMD_MMAPBATCH is expected to set the top nibble of
the effected MFN and return 0. Currently it leaves the MFN unmodified
and returns the number of failures. Therefore:

- reimplement remap_domain_mfn_range() using direct
  HYPERVISOR_mmu_update() calls and small batches. The xen_set_domain_pte()
  interface does not report errors and since some failures are
  expected/normal using the multicall infrastructure is too noisy.
- return 0 as expected
- writeback the updated MFN list to mmapbatch->arr not over mmapbatch,
  smashing the caller's stack.
- remap_domain_mfn_range can be static.

With this change I am able to start an HVM domain.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-20 16:22:33 -07:00
Jeremy Fitzhardinge
8e3e99918b xenbus: export xen_store_interface for xenfs
xen_store_interface is needed by xenfs, and xenfs may be a module.

[ Impact: build fix for modular xenfs ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-20 16:22:32 -07:00
Jeremy Fitzhardinge
f31fdf5105 xen/privcmd: make sure vma is ours before doing anything to it
Test vma->vm_ops is our operations to make sure we created it.
We don't want to stomp on other random vmas.

[ Impact: bugfix; prevent ioctl from affecting other mappings ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-20 16:22:32 -07:00
Jeremy Fitzhardinge
441c7416b5 xen/privcmd: print SIGBUS faults
Print more detail about privcmd mapping faults for debugging.

[ Impact: debug ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-20 16:22:31 -07:00
Jeremy Fitzhardinge
35f8c1c343 xen/xenfs: set_page_dirty is supposed to return true if it dirties
I don't think it matters at all in this case (there's only one caller
which checks the return value), but may as well be strictly correct.

[ Impact: cleanup ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-20 16:22:30 -07:00
Jeremy Fitzhardinge
24a89b5be4 xen/privcmd: create address space to allow writable mmaps
These are necessary to allow writeable mmap of the privcmd node to
succeed without being marked read-only for writenotify purposes. Which
in turn is necessary to allow mappings of foreign guest pages

[ Impact: bugfix: allow writable mappings ]

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-20 16:22:30 -07:00
Jeremy Fitzhardinge
1c5de1939c xen: add privcmd driver
The privcmd interface in xenfs allows the tool stack in the privileged
domain to get fairly direct access to the hypervisor in order to do
various management things such as domain construction.

[ Impact: new xenfs interface for privileged operations ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-20 16:22:29 -07:00
Ian Campbell
655d406a7c xen: add /proc/xen/xsd_{kva,port} to xenfs
These are used by the userspace xenstore daemon, which runs in dom0.
Xenstored is what's behind the xenfs "xenbus" filesystem.

[ Impact: provide mapping and port to usermode for xenstore ]

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-20 16:22:26 -07:00
Konrad Rzeszutek Wilk
2d7d06dd8f xen: Update Makefile with CONFIG_BLOCK dependency for biomerge.c
Without this dependency we get these compile errors:

linux-next-20101020/drivers/xen/biomerge.c: In function 'xen_biovec_phys_mergeable':
linux-next-20101020/drivers/xen/biomerge.c:8: error: dereferencing pointer to incomplete type
linux-next-20101020/drivers/xen/biomerge.c:9: error: dereferencing pointer to incomplete type
linux-next-20101020/drivers/xen/biomerge.c:11: error: implicit declaration of function '__BIOVEC_PHYS_MERGEABLE'

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
2010-10-20 13:04:13 -04:00
Ingo Molnar
14d4962dc8 Merge branch 'linus' into irq/core
Merge reason: update to almost-final-.36

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-20 04:38:59 +02:00
Konrad Rzeszutek Wilk
2c52f8d3f7 x86: xen: Sanitse irq handling (part two)
Thomas Gleixner cleaned up event handling to use the
sparse_irq handling, but the xen-pcifront patches utilized the
old mechanism. This fixes them to work with sparse_irq handling.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-18 17:12:38 -04:00
Konrad Rzeszutek Wilk
2775609c5d swiotlb-xen: On x86-32 builts, select SWIOTLB instead of depending on it.
We used to depend on CONFIG_SWIOTLB, but that is disabled by default.
So when compiling we get this compile error:

arch/x86/xen/pci-swiotlb-xen.c: In function 'pci_xen_swiotlb_detect':
arch/x86/xen/pci-swiotlb-xen.c:48: error: lvalue required as left operand of assignment

Fix it by actually activating the SWIOTLB library.

Reported-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-18 10:49:40 -04:00
Konrad Rzeszutek Wilk
74226b8c8a xen/pci: Request ACS when Xen-SWIOTLB is activated.
It used to done in the Xen startup code but that is not really
appropiate.

[v2: Update Kconfig with PCI requirement]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-18 10:49:38 -04:00
Yosuke Iwamatsu
89afb6e46a xenbus: Xen paravirtualised PCI hotplug support.
The Xen PCI front driver adds two new states that are utilizez
for PCI hotplug support. This is a patch pulled from the
linux-2.6-xen-sparse tree.

Signed-off-by: Noboru Iwamatsu <n_iwamatsu@jp.fujitsu.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Yosuke Iwamatsu <y-iwamatsu@ab.jp.nec.com>
2010-10-18 10:49:35 -04:00
Alex Nixon
b5401a96b5 xen/x86/PCI: Add support for the Xen PCI subsystem
The frontend stub lives in arch/x86/pci/xen.c, alongside other
sub-arch PCI init code (e.g. olpc.c).

It provides a mechanism for Xen PCI frontend to setup/destroy
legacy interrupts, MSI/MSI-X, and PCI configuration operations.

[ Impact: add core of Xen PCI support ]
[ v2: Removed the IOMMU code and only focusing on PCI.]
[ v3: removed usage of pci_scan_all_fns as that does not exist]
[ v4: introduced pci_xen value to fix compile warnings]
[ v5: squished fixes+features in one patch, changed Reviewed-by to Ccs]
[ v7: added Acked-by]
Signed-off-by: Alex Nixon <alex.nixon@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Qing He <qing.he@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
2010-10-18 10:49:35 -04:00
Konrad Rzeszutek Wilk
15ebbb82ba xen: fix shared irq device passthrough
In driver/xen/events.c, whether bind_pirq is shareable or not is
determined by desc->action is NULL or not. But in __setup_irq,
startup(irq) is invoked before desc->action is assigned with
new action. So desc->action in startup_irq is always NULL, and
bind_pirq is always not shareable. This results in pt_irq_create_bind
failure when passthrough a device which shares irq to other devices.

This patch doesn't use probing_irq to determine if pirq is shareable
or not, instead set shareable flag in irq_info according to trigger
mode in xen_allocate_pirq. Set level triggered interrupts shareable.
Thus use this flag to set bind_pirq flag accordingly.

[v2: arch/x86/xen/pci.c no more, so file skipped]

Signed-off-by: Weidong Han <weidong.han@intel.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-18 10:49:29 -04:00
Konrad Rzeszutek Wilk
d9a8814f27 xen: Provide a variant of xen_poll_irq with timeout.
The 'xen_poll_irq_timeout' provides a method to pass in
the poll timeout for IRQs if requested. We also export
those two poll functions as Xen PCI fronted uses them.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-18 10:49:28 -04:00
Konrad Rzeszutek Wilk
3a69e9165a xen: Find an unbound irq number in reverse order (high to low).
In earlier Xen Linux kernels, the IRQ mapping was a straight 1:1 and the
find_unbound_irq started looking around 256 for open IRQs and up. IRQs
from 0 to 255 were reserved for PCI devices.  Previous to this patch,
the 'find_unbound_irq'  started looking at get_nr_hw_irqs() number.
For privileged  domain where the ACPI information is available that
returns the upper-bound of what the GSIs. For non-privileged PV domains,
where ACPI is no-existent the get_nr_hw_irqs() reports the IRQ_LEGACY (16).
With PCI passthrough enabled, and with PCI cards that have IRQs pinned
to a higher number than 16 we collide with previously allocated IRQs.
Specifically the PCI IRQs collide with the IPI's for Xen functions
(as they are allocated earlier).
For example:

00:00.11 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller (prog-if 10 [OHCI])
	...
	Interrupt: pin A routed to IRQ 18

[root@localhost ~]# cat /proc/interrupts | head
           CPU0       CPU1       CPU2
 16:      38186          0          0   xen-dyn-virq      timer0
 17:        149          0          0   xen-dyn-ipi       spinlock0
 18:        962          0          0   xen-dyn-ipi       resched0

and when the USB controller is loaded, the kernel reports:
IRQ handler type mismatch for IRQ 18
current handler: resched0

One way to fix this is to reverse the logic when looking for un-used
IRQ numbers and start with the highest available number. With that,
we would get:

           CPU0       CPU1       CPU2
... snip ..
292:         35          0          0   xen-dyn-ipi       callfunc0
293:       3992          0          0   xen-dyn-ipi       resched0
294:        224          0          0   xen-dyn-ipi       spinlock0
295:      57183          0          0   xen-dyn-virq      timer0
NMI:          0          0          0   Non-maskable interrupts
.. snip ..

And interrupts for PCI cards are now accessible.

This patch also includes the fix, found by Ian Campbell, titled
"xen: fix off-by-one error in find_unbound_irq."

[v2: Added an explanation in the code]
[v3: Rebased on top of tip/irq/core]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-18 10:49:10 -04:00
Jeremy Fitzhardinge
3b32f574a0 xen: statically initialize cpu_evtchn_mask_p
Sometimes cpu_evtchn_mask_p can get used early, before it has been
allocated.  Statically initialize it with an initdata version to catch
any early references.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-18 10:41:44 -04:00
Gerd Hoffmann
1a60d05f40 xen: set pirq name to something useful.
Impact: cleanup

Make pirq show useful information in /proc/interrupts

[v2: Removed the parts for arch/x86/xen/pci.c ]

Signed-off-by: Gerd Hoffmann <kraxel@xeni.home.kraxel.org>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-18 10:41:43 -04:00
Jeremy Fitzhardinge
b21ddbf503 xen: dynamically allocate irq & event structures
Dynamically allocate the irq_info and evtchn_to_irq arrays, so that
1) the irq_info array scales to the actual number of possible irqs,
and 2) we don't needlessly increase the static size of the kernel
when we aren't running under Xen.

Derived on patch from Mike Travis <travis@sgi.com>.

[Impact: reduce memory usage ]
[v2: Conflict in drivers/xen/events.c: Replaced alloc_bootmen with kcalloc ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-18 10:41:42 -04:00
Konrad Rzeszutek Wilk
0794bfc743 xen: identity map gsi->irqs
Impact: preserve compat with native

Reserve the lower irq range for use for hardware interrupts so we
can identity-map them.

[v2: Rebased on top tip/irq/core]
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-18 10:41:08 -04:00
Jeremy Fitzhardinge
d46a78b05c xen: implement pirq type event channels
A privileged PV Xen domain can get direct access to hardware.  In
order for this to be useful, it must be able to get hardware
interrupts.

Being a PV Xen domain, all interrupts are delivered as event channels.
PIRQ event channels are bound to a pirq number and an interrupt
vector.  When a IO APIC raises a hardware interrupt on that vector, it
is delivered as an event channel, which we can deliver to the
appropriate device driver(s).

This patch simply implements the infrastructure for dealing with pirq
event channels.

[ Impact: integrate hardware interrupts into Xen's event scheme ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-18 10:40:29 -04:00
Jeremy Fitzhardinge
d8e0420603 xen: define BIOVEC_PHYS_MERGEABLE()
Impact: allow Xen control of bio merging

When running in Xen domain with device access, we need to make sure
the block subsystem doesn't merge requests across pages which aren't
machine physically contiguous.  To do this, we define our own
BIOVEC_PHYS_MERGEABLE.  When CONFIG_XEN isn't enabled, or we're not
running in a Xen domain, this has identical behaviour to the normal
implementation.  When running under Xen, we also make sure the
underlying machine pages are the same or adjacent.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-18 10:40:28 -04:00
Arnd Bergmann
6038f373a3 llseek: automatically add .llseek fop
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.

The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.

New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time.  Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.

The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.

Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.

Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.

===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
//   but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}

@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}

@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
   *off = E
|
   *off += E
|
   func(..., off, ...)
|
   E = *off
)
...+>
}

@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}

@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
  *off = E
|
  *off += E
|
  func(..., off, ...)
|
  E = *off
)
...+>
}

@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}

@ fops0 @
identifier fops;
@@
struct file_operations fops = {
 ...
};

@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
 .llseek = llseek_f,
...
};

@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
 .read = read_f,
...
};

@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
 .write = write_f,
...
};

@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
 .open = open_f,
...
};

// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
...  .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};

@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
...  .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};

// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
...  .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};

// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};

// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};

@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+	.llseek = default_llseek, /* write accesses f_pos */
};

// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////

@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
 .write = write_f,
 .read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};

@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};

@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};

@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
2010-10-15 15:53:27 +02:00
Thomas Gleixner
77dff1c755 x86: xen: Sanitise sparse_irq handling
There seems to be more cleanups possible, but that's left to the xen
experts :)

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
2010-10-12 16:53:44 +02:00
Jeremy Fitzhardinge
70697d540c xen/evtchn: add missing static
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-05 11:13:44 -07:00
Stefano Stabellini
a947f0f8f7 xen: do not set xenstored_ready before xenbus_probe on hvm
Register_xenstore_notifier should guarantee that the caller gets
notified even if xenstore is already up.
Therefore we revert "do not notify callers from
register_xenstore_notifier" and set xenstored_read at the right time for
PV on HVM guests too.
In fact in case of PV on HVM guests xenstored is ready only after the
platform pci driver has completed the initialization, so do not set
xenstored_ready before the call to xenbus_probe().

This patch fixes a shutdown_event watcher registration bug that causes
"xm shutdown" not to work properly.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
2010-10-05 13:37:28 +01:00
Daniel De Graaf
7808121b9a xenbus: avoid zero returns from read()
It is possible to get a zero return from read() in instances where the
queue is not empty but has no elements with data to deliver to the user.
Since a zero return from read is an error indicator, resume waiting or
return -EAGAIN (for a nonblocking fd) in this case.

Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-09-09 10:48:22 +10:00
Daniel De Graaf
76ce7618f9 xenbus: add missing wakeup in concurrent read/write
If an application has a dedicated read thread watching xenbus and
another thread writes an XS_WATCH message that generates a synthetic
"OK" reply, this reply will be enqueued in the buffer without waking up
the reader. This can cause a deadlock in the application if it then
waits for the read thread to receive the queued message.

Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>

commit e752969f502a511e83f841aa01d6cd332e6d85a0
Author: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Date:   Tue Sep 7 11:21:52 2010 -0400

    xenbus: fix deadlock in concurrent read/write

    If an application has a dedicated read thread watching xenbus and another
    thread writes an XS_WATCH message that generates a synthetic "OK" reply,
    this reply will be enqueued in the buffer without waking up the reader.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-09-08 23:18:02 +10:00
Diego Ongaro
6d6df2e412 xenbus: allow any xenbus command over /proc/xen/xenbus
When xenstored is in another domain, we need to be able to send any
command over xenbus.  This doesn't pose a security problem because
its up to xenstored to determine whether a given client is allowed
to use a particular command anyway.

From linux-2.5.18-xen.hg 68d582b0ad05.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-09-01 09:25:41 -07:00
Linus Torvalds
2637d139fb Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: pxa27x_keypad - remove input_free_device() in pxa27x_keypad_remove()
  Input: mousedev - fix regression of inverting axes
  Input: uinput - add devname alias to allow module on-demand load
  Input: hil_kbd - fix compile error
  USB: drop tty argument from usb_serial_handle_sysrq_char()
  Input: sysrq - drop tty argument form handle_sysrq()
  Input: sysrq - drop tty argument from sysrq ops handlers
2010-08-28 13:55:31 -07:00
Jeremy Fitzhardinge
fb27cfbcbd xenfs/xenbus: report partial reads/writes correctly
copy_(to|from)_user return the number of uncopied bytes, so a successful
return is 0, and any non-zero result indicates some degree of failure.

Reported-by: "Jun Zhu (Intern)" <Jun.Zhu@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-08-25 12:19:53 -07:00
Jeremy Fitzhardinge
dffe2e1e1a xen: handle events as edge-triggered
Xen events are logically edge triggered, as Xen only calls the event
upcall when an event is newly set, but not continuously as it remains set.
As a result, use handle_edge_irq rather than handle_level_irq.

This has the important side-effect of fixing a long-standing bug of
events getting lost if:
 - an event's interrupt handler is running
 - the event is migrated to a different vcpu
 - the event is re-triggered

The most noticable symptom of these lost events is occasional lockups
of blkfront.

Many thanks to Tom Kopec and Daniel Stodden in tracking this down.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Tom Kopec <tek@acm.org>
Cc: Daniel Stodden <daniel.stodden@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
2010-08-24 11:14:12 -07:00
Jeremy Fitzhardinge
aaca49642b xen: use percpu interrupts for IPIs and VIRQs
IPIs and VIRQs are inherently per-cpu event types, so treat them as such:
 - use a specific percpu irq_chip implementation, and
 - handle them with handle_percpu_irq

This makes the path for delivering these interrupts more efficient
(no masking/unmasking, no locks), and it avoid problems with attempts
to migrate them.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
2010-08-24 11:13:28 -07:00
Dmitry Torokhov
f335397d17 Input: sysrq - drop tty argument form handle_sysrq()
Sysrq operations do not accept tty argument anymore so no need to pass
it to us.

[Stephen Rothwell <sfr@canb.auug.org.au>: fix build breakage in drm code
 caused by sysrq using bool but not including linux/types.h]

[Sachin Sant <sachinp@in.ibm.com>: fix build breakage in s390 keyboadr
 driver]

Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-08-21 00:34:45 -07:00
Linus Torvalds
26f0cf9181 Merge branch 'stable/xen-swiotlb-0.8.6' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/xen-swiotlb-0.8.6' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  x86: Detect whether we should use Xen SWIOTLB.
  pci-swiotlb-xen: Add glue code to setup dma_ops utilizing xen_swiotlb_* functions.
  swiotlb-xen: SWIOTLB library for Xen PV guest with PCI passthrough.
  xen/mmu: inhibit vmap aliases rather than trying to clear them out
  vmap: add flag to allow lazy unmap to be disabled at runtime
  xen: Add xen_create_contiguous_region
  xen: Rename the balloon lock
  xen: Allow unprivileged Xen domains to create iomap pages
  xen: use _PAGE_IOMAP in ioremap to do machine mappings

Fix up trivial conflicts (adding both xen swiotlb and xen pci platform
driver setup close to each other) in drivers/xen/{Kconfig,Makefile} and
include/xen/xen-ops.h
2010-08-12 09:09:41 -07:00
Linus Torvalds
2f9e825d3e Merge branch 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block: (149 commits)
  block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n
  xen-blkfront: fix missing out label
  blkdev: fix blkdev_issue_zeroout return value
  block: update request stacking methods to support discards
  block: fix missing export of blk_types.h
  writeback: fix bad _bh spinlock nesting
  drbd: revert "delay probes", feature is being re-implemented differently
  drbd: Initialize all members of sync_conf to their defaults [Bugz 315]
  drbd: Disable delay probes for the upcomming release
  writeback: cleanup bdi_register
  writeback: add new tracepoints
  writeback: remove unnecessary init_timer call
  writeback: optimize periodic bdi thread wakeups
  writeback: prevent unnecessary bdi threads wakeups
  writeback: move bdi threads exiting logic to the forker thread
  writeback: restructure bdi forker loop a little
  writeback: move last_active to bdi
  writeback: do not remove bdi from bdi_list
  writeback: simplify bdi code a little
  writeback: do not lose wake-ups in bdi threads
  ...

Fixed up pretty trivial conflicts in drivers/block/virtio_blk.c and
drivers/scsi/scsi_error.c as per Jens.
2010-08-10 15:22:42 -07:00
Daniel Stodden
5b61cb90c2 xenbus: Make xenbus_switch_state transactional
According to the comments, this was how it's been done years ago, but
apparently took an xbt pointer from elsewhere back then. The code was
removed because of consistency issues: cancellation wont't roll back
the saved xbdev->state.

Still, unsolicited writes to the state field remain an issue,
especially if device shutdown takes thread synchronization, and subtle
races cause accidental recreation of the device node.

Fixed by reintroducing the transaction. An internal one is sufficient,
so the xbdev->state value remains consistent.

Also fixes the original hack to prevent infinite recursion. Instead of
bailing out on the first attempt to switch to Closing, checks call
depth now.

Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-08-07 18:31:34 +02:00
Linus Torvalds
1787985782 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  xen: Do not suspend IPI IRQs.
  powerpc: Use IRQF_NO_SUSPEND not IRQF_TIMER for non-timer interrupts
  ixp4xx-beeper: Use IRQF_NO_SUSPEND not IRQF_TIMER for non-timer interrupt
  irq: Add new IRQ flag IRQF_NO_SUSPEND
2010-08-06 13:25:43 -07:00
Jeremy Fitzhardinge
7cc88fdcff Merge branch 'xen/xenbus' into upstream/xen
* xen/xenbus:
  implement O_NONBLOCK for /proc/xen/xenbus
  xenbus: do not hold transaction_mutex when returning to userspace
2010-08-04 14:49:24 -07:00
Jeremy Fitzhardinge
ca50a5f390 Merge branch 'upstream/pvhvm' into upstream/xen
* upstream/pvhvm:
  Introduce CONFIG_XEN_PVHVM compile option
  blkfront: do not create a PV cdrom device if xen_hvm_guest
  support multiple .discard.* sections to avoid section type conflicts
  xen/pvhvm: fix build problem when !CONFIG_XEN
  xenfs: enable for HVM domains too
  x86: Call HVMOP_pagetable_dying on exit_mmap.
  x86: Unplug emulated disks and nics.
  x86: Use xen_vcpuop_clockevent, xen_clocksource and xen wallclock.
  xen: Fix find_unbound_irq in presence of ioapic irqs.
  xen: Add suspend/resume support for PV on HVM guests.
  xen: Xen PCI platform device driver.
  x86/xen: event channels delivery on HVM.
  x86: early PV on HVM features initialization.
  xen: Add support for HVM hypercalls.

Conflicts:
	arch/x86/xen/enlighten.c
	arch/x86/xen/time.c
2010-08-04 14:49:16 -07:00
Jeremy Fitzhardinge
a70ce4b606 Merge branch 'upstream/core' into upstream/xen
* upstream/core:
  xen/panic: use xen_reboot and fix smp_send_stop
  Xen: register panic notifier to take crashes of xen guests on panic
  xen: support large numbers of CPUs with vcpu info placement
  xen: drop xen_sched_clock in favour of using plain wallclock time
  pvops: do not notify callers from register_xenstore_notifier
  xen: make sure pages are really part of domain before freeing
  xen: release unused free memory
2010-08-04 14:49:05 -07:00
Stefano Stabellini
31de189f7d pvops: do not notify callers from register_xenstore_notifier
Currently register_xenstore_notifier notifies the caller during the
registration itself if xenstore is believed to be ready. This behaviour
causes problems to PV on HVM guests, in which case callers should be
notified by xenbus_probe only after the platform pci driver is loaded.
We already make sure xenbus_probe is called at the right time, calling
it either from device_initcall (PV case) or from the platform pci
driver initialization (HVM case) so we don't need this additional
notification.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-08-04 14:47:28 -07:00
Stefano Stabellini
ca65f9fc0c Introduce CONFIG_XEN_PVHVM compile option
This patch introduce a CONFIG_XEN_PVHVM compile time option to
enable/disable Xen PV on HVM support.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2010-07-29 11:11:33 -07:00
Ian Campbell
4877c73728 xen: Do not suspend IPI IRQs.
In general the semantics of IPIs are that they are are expected to
continue functioning after dpm_suspend_noirq().

Specifically I have seen a deadlock between the callfunc IPI and the
stop machine used by xen's do_suspend() routine. If one CPU has already
called dpm_suspend_noirq() then there is a window where it can be sent
a callfunc IPI before all the other CPUs have entered stop_cpu().

If this happens then the first CPU ends up spinning in stop_cpu()
waiting for the other to rendezvous in state STOPMACHINE_PREPARE while
the other is spinning in csd_lock_wait().

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: xen-devel@lists.xensource.com
LKML-Reference: <1280398595-29708-4-git-send-email-ian.campbell@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-07-29 13:24:58 +02:00
Konrad Rzeszutek Wilk
b097186fd2 swiotlb-xen: SWIOTLB library for Xen PV guest with PCI passthrough.
This patchset:

PV guests under Xen are running in an non-contiguous memory architecture.

When PCI pass-through is utilized, this necessitates an IOMMU for
translating bus (DMA) to virtual and vice-versa and also providing a
mechanism to have contiguous pages for device drivers operations (say DMA
operations).

Specifically, under Xen the Linux idea of pages is an illusion. It
assumes that pages start at zero and go up to the available memory. To
help with that, the Linux Xen MMU provides a lookup mechanism to
translate the page frame numbers (PFN) to machine frame numbers (MFN)
and vice-versa. The MFN are the "real" frame numbers. Furthermore
memory is not contiguous. Xen hypervisor stitches memory for guests
from different pools, which means there is no guarantee that PFN==MFN
and PFN+1==MFN+1. Lastly with Xen 4.0, pages (in debug mode) are
allocated in descending order (high to low), meaning the guest might
never get any MFN's under the 4GB mark.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Albert Herranz <albert_herranz@yahoo.es>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
2010-07-27 11:51:00 -04:00
Jeremy Fitzhardinge
43df95c44e xenfs: enable for HVM domains too
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-07-26 23:13:27 -07:00
Stefano Stabellini
c1c5413ad5 x86: Unplug emulated disks and nics.
Add a xen_emul_unplug command line option to the kernel to unplug
xen emulated disks and nics.

Set the default value of xen_emul_unplug depending on whether or
not the Xen PV frontends and the Xen platform PCI driver have
been compiled for this kernel (modules or built-in are both OK).

The user can specify xen_emul_unplug=ignore to enable PV drivers on HVM
even if the host platform doesn't support unplug.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-07-26 23:13:25 -07:00
Paolo Bonzini
6280f190da implement O_NONBLOCK for /proc/xen/xenbus
This patch implements O_NONBLOCK for /proc/xen/xenbus.  It is a simple
matter of returning -EAGAIN instead of waiting on a queue.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-07-26 10:05:05 -07:00
Stefano Stabellini
99ad198c49 xen: Fix find_unbound_irq in presence of ioapic irqs.
Don't break the assumption that the first 16 irqs are ISA irqs;
make sure that the irq is actually free before using it.

Use dynamic_irq_init_keep_chip_data instead of
dynamic_irq_init so that chip_data is not NULL (a NULL chip_data breaks
setup_vector_irq).

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-07-22 16:46:30 -07:00
Stefano Stabellini
016b6f5fe8 xen: Add suspend/resume support for PV on HVM guests.
Suspend/resume requires few different things on HVM: the suspend
hypercall is different; we don't need to save/restore memory related
settings; except the shared info page and the callback mechanism.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-07-22 16:46:21 -07:00
Stefano Stabellini
183d03cc4f xen: Xen PCI platform device driver.
Add the xen pci platform device driver that is responsible
for initializing the grant table and xenbus in PV on HVM mode.
Few changes to xenbus and grant table are necessary to allow the delayed
initialization in HVM mode.
Grant table needs few additional modifications to work in HVM mode.

The Xen PCI platform device raises an irq every time an event has been
delivered to us. However these interrupts are only delivered to vcpu 0.
The Xen PCI platform interrupt handler calls xen_hvm_evtchn_do_upcall
that is a little wrapper around __xen_evtchn_do_upcall, the traditional
Xen upcall handler, the very same used with traditional PV guests.

When running on HVM the event channel upcall is never called while in
progress because it is a normal Linux irq handler (and we cannot switch
the irq chip wholesale to the Xen PV ones as we are running QEMU and
might have passed in PCI devices), therefore we cannot be sure that
evtchn_upcall_pending is 0 when returning.
For this reason if evtchn_upcall_pending is set by Xen we need to loop
again on the event channels set pending otherwise we might loose some
event channel deliveries.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-07-22 16:46:09 -07:00
Sheng Yang
38e20b07ef x86/xen: event channels delivery on HVM.
Set the callback to receive evtchns from Xen, using the
callback vector delivery mechanism.

The traditional way for receiving event channel notifications from Xen
is via the interrupts from the platform PCI device.
The callback vector is a newer alternative that allow us to receive
notifications on any vcpu and doesn't need any PCI support: we allocate
a vector exclusively to receive events, in the vector handler we don't
need to interact with the vlapic, therefore we avoid a VMEXIT.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-07-22 16:45:59 -07:00
Sheng Yang
bee6ab53e6 x86: early PV on HVM features initialization.
Initialize basic pv on hvm features adding a new Xen HVM specific
hypervisor_x86 structure.

Don't try to initialize xen-kbdfront and xen-fbfront when running on HVM
because the backends are not available.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-07-22 16:45:35 -07:00
Alex Nixon
19001c8c5b xen: Rename the balloon lock
* xen_create_contiguous_region needs access to the balloon lock to
  ensure memory doesn't change under its feet, so expose the balloon
  lock
* Change the name of the lock to xen_reservation_lock, to imply it's
  now less-specific usage.

[ Impact: cleanup ]

Signed-off-by: Alex Nixon <alex.nixon@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-06-07 14:34:07 -04:00
Ian Campbell
b3831cb55d xen: avoid allocation causing potential swap activity on the resume path
Since the device we are resuming could be the device containing the
swap device we should ensure that the allocation cannot cause
IO.

On resume, this path is triggered when the running system tries to
continue using its devices.  If it cannot then the resume will fail;
to try to avoid this we let it dip into the emergency pools.

The majority of these changes were made when linux-2.6.18-xen.hg
changeset e8b49cfbdac0 was ported upstream in
a144ff09bc but somehow this hunk was
dropped.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Stable Kernel <stable@kernel.org> # .32.x
2010-06-03 09:34:45 +01:00
Bastian Blank
376d908f52 xen/evtchn: Fix name of Xen event-channel device
The Xen event-channel device is named evtchn in the kernel but always
used as /dev/xen/evtchn in userspace. This patch fixes the name.

Signed-off-by: Bastian Blank <waldi@debian.org>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-05-28 15:43:49 -07:00
Jeremy Fitzhardinge
3f5e554f66 xen/evtchn: don't do unbind_from_irqhandler under spinlock
unbind_from_irqhandler can end up doing /proc operations, which can't
happen under a spinlock.  So before removing the IRQ handler,
disable the irq under the port_user lock (masking the underlying event
channel and making sure the irq handler isn't running concurrently and
won't start running), then remove the handler without the lock.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-05-28 15:28:27 -07:00
Randy Dunlap
f3bc3189a0 xen: fix build when SYSRQ is disabled
Fix build error when CONFIG_MAGIC_SYSRQ is not enabled:

drivers/xen/manage.c:223: error: implicit declaration of function 'handle_sysrq'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 08:07:07 -07:00
Tejun Heo
3fc1f1e27a stop_machine: reimplement using cpu_stop
Reimplement stop_machine using cpu_stop.  As cpu stoppers are
guaranteed to be available for all online cpus,
stop_machine_create/destroy() are no longer necessary and removed.

With resource management and synchronization handled by cpu_stop, the
new implementation is much simpler.  Asking the cpu_stop to execute
the stop_cpu() state machine on all online cpus with cpu hotplug
disabled is enough.

stop_machine itself doesn't need to manage any global resources
anymore, so all per-instance information is rolled into struct
stop_machine_data and the mutex and all static data variables are
removed.

The previous implementation created and destroyed RT workqueues as
necessary which made stop_machine() calls highly expensive on very
large machines.  According to Dimitri Sivanich, preventing the dynamic
creation/destruction makes booting faster more than twice on very
large machines.  cpu_stop resources are preallocated for all online
cpus and should have the same effect.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Dimitri Sivanich <sivanich@sgi.com>
2010-05-06 18:49:20 +02:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Emese Revfy
52cf25d0ab Driver core: Constify struct sysfs_ops in struct kobj_type
Constify struct sysfs_ops.

This is part of the ops structure constification
effort started by Arjan van de Ven et al.

Benefits of this constification:

 * prevents modification of data that is shared
   (referenced) by many other structure instances
   at runtime

 * detects/prevents accidental (but not intentional)
   modification attempts on archs that enforce
   read-only kernel data at runtime

 * potentially better optimized code as the compiler
   can assume that the const data cannot be changed

 * the compiler/linker move const data into .rodata
   and therefore exclude them from false sharing

Signed-off-by: Emese Revfy <re.emese@gmail.com>
Acked-by: David Teigland <teigland@redhat.com>
Acked-by: Matt Domsch <Matt_Domsch@dell.com>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Acked-by: Hans J. Koch <hjk@linutronix.de>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:49 -08:00
Randy Dunlap
27fb7f009b xen: add kconfig menu
Currently the xen support drivers are displayed in the main Device Drivers
menu of the config tools instead of in their own sub-menu, so move them to
their own sub-menu, like the rest of the driver world uses.

This keeps the main Device Drivers menu from becoming messy.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:46 -08:00
Eric W. Biederman
ca4dbc6684 xen: Remove unnecessary arch specific xen irq functions.
Right now xen's use of the x86 and ia64 handle_irq is just bizarre and very
fragile as it is very non-obvious the function exists and is is used by
code out in drivers/....  Luckily using handle_irq is completely unnecessary,
and we can just use the generic irq apis instead.

This still leaves drivers/xen/events.c as a problematic user of the generic
irq apis it has "static struct irq_info irq_info[NR_IRQS]" but that can be
fixed some other time.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
LKML-Reference: <4B7CAAD2.10803@kernel.org>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-18 17:17:58 -08:00
Ian Campbell
c5cae661d6 xen: fix hang on suspend.
In 65f63384 "xen: improve error handling in do_suspend" I said:
    - xs_suspend()/xs_resume() and dpm_suspend_noirq()/dpm_resume_noirq() were not
      nested in the obvious way.
and changed the ordering of the calls as so:
    BEFORE		AFTER
    xs_suspend		dpm_suspend_noirq
    dpm_suspend_noirq	xs_suspend
    *SUSPEND*		*SUSPEND*
    dpm_resume_noirq	dpm_resume_noirq
    xs_resume		xs_resume
Clearly this is not an improvement and I was talking rubbish.

In particular the new ordering is susceptible to a hang if a xenstore write is
in progress at the point at which the suspend kicks in. When the suspend
process calls xs_suspend it tries to take the request_mutex but if a write is
in progress it could be looping in xenbus_xs.c:read_reply() waiting for
something to arrive on &xs_state.reply_list while holding the request_mutex
(taken in the caller of read_reply).

However if we have done dpm_suspend_noirq before xs_suspend then we won't get
any more xenstore interrupts and process_msg() will never be woken up to add
anything to the reply_list.

Fix this by calling xs_suspend before dpm_suspend_noirq. If dpm_suspend_noirq
fails then make sure we go through the xs_suspend_cancel() code path.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
2010-01-13 10:01:35 +00:00
Linus Torvalds
11bd04f6f3 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (109 commits)
  PCI: fix coding style issue in pci_save_state()
  PCI: add pci_request_acs
  PCI: fix BUG_ON triggered by logical PCIe root port removal
  PCI: remove ifdefed pci_cleanup_aer_correct_error_status
  PCI: unconditionally clear AER uncorr status register during cleanup
  x86/PCI: claim SR-IOV BARs in pcibios_allocate_resource
  PCI: portdrv: remove redundant definitions
  PCI: portdrv: remove unnecessary struct pcie_port_data
  PCI: portdrv: minor cleanup for pcie_port_device_register
  PCI: portdrv: add missing irq cleanup
  PCI: portdrv: enable device before irq initialization
  PCI: portdrv: cleanup service irqs initialization
  PCI: portdrv: check capabilities first
  PCI: portdrv: move PME capability check
  PCI: portdrv: remove redundant pcie type calculation
  PCI: portdrv: cleanup pcie_device registration
  PCI: portdrv: remove redundant pcie_port_device_probe
  PCI: Always set prefetchable base/limit upper32 registers
  PCI: read-modify-write the pcie device control register when initiating pcie flr
  PCI: show dma_mask bits in /sys
  ...

Fixed up conflicts in:
	arch/x86/kernel/amd_iommu_init.c
	drivers/pci/dmar.c
	drivers/pci/hotplug/acpiphp_glue.c
2009-12-11 12:18:16 -08:00
Linus Torvalds
ab1831b0b8 Merge branch 'bugfix' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen
* 'bugfix' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
  xen: try harder to balloon up under memory pressure.
  Xen balloon: fix totalram_pages counting.
  xen: explicitly create/destroy stop_machine workqueues outside suspend/resume region.
  xen: improve error handling in do_suspend.
  xen: don't leak IRQs over suspend/resume.
  xen: call clock resume notifier on all CPUs
  xen: use iret for return from 64b kernel to 32b usermode
  xen: don't call dpm_resume_noirq() with interrupts disabled.
  xen: register runstate info for boot CPU early
  xen: register runstate on secondary CPUs
  xen: register timer interrupt with IRQF_TIMER
  xen: correctly restore pfn_to_mfn_list_list after resume
  xen: restore runstate_info even if !have_vcpu_info_placement
  xen: re-register runstate area earlier on resume.
  xen: wait up to 5 minutes for device connetion
  xen: improvement to wait_for_devices()
  xen: fix is_disconnected_device/exists_disconnected_device
  xen/xenbus: make DEVICE_ATTR()s static
2009-12-10 09:35:02 -08:00
Ian Campbell
bc2c030322 xen: try harder to balloon up under memory pressure.
Currently if the balloon driver is unable to increase the guest's
reservation it assumes the failure was due to reaching its full
allocation, gives up on the ballooning operation and records the limit
it reached as the "hard limit". The driver will not try again until
the target is set again (even to the same value).

However it is possible that ballooning has in fact failed due to
memory pressure in the host and therefore it is desirable to keep
attempting to reach the target in case memory becomes available. The
most likely scenario is that some guests are ballooning down while
others are ballooning up and therefore there is temporary memory
pressure while things stabilise. You would not expect a well behaved
toolstack to ask a domain to balloon to more than its allocation nor
would you expect it to deliberately over-commit memory by setting
balloon targets which exceed the total host memory.

This patch drops the concept of a hard limit and causes the balloon
driver to retry increasing the reservation on a timer in the same
manner as when decreasing the reservation.

Also if we partially succeed in increasing the reservation
(i.e. receive less pages than we asked for) then we may as well keep
those pages rather than returning them to Xen.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
2009-12-04 08:15:19 -08:00
Gianluca Guida
3d65c9488c Xen balloon: fix totalram_pages counting.
Change totalram_pages when a single page is added/removed to the
ballooned list. This avoid totalram_pages to be set erroneously to
max_pfn at boot.

Signed-off-by: Gianluca Guida <gianluca.guida@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
2009-12-04 08:13:44 -08:00
Ian Campbell
b4606f2165 xen: explicitly create/destroy stop_machine workqueues outside suspend/resume region.
I have observed cases where the implicit stop_machine_destroy() done by
stop_machine() hangs while destroying the workqueues, specifically in
kthread_stop(). This seems to be because timer ticks are not restarted
until after stop_machine() returns.

Fortunately stop_machine provides a facility to pre-create/post-destroy
the workqueues so use this to ensure that workqueues are only destroyed
after everything is really up and running again.

I only actually observed this failure with 2.6.30. It seems that newer
kernels are somehow more robust against doing kthread_stop() without timer
interrupts (I tried some backports of some likely looking candidates but
did not track down the commit which added this robustness). However this
change seems like a reasonable belt&braces thing to do.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
2009-12-03 11:14:56 -08:00
Ian Campbell
65f63384b3 xen: improve error handling in do_suspend.
The existing error handling has a few issues:
- If freeze_processes() fails it exits with shutting_down = SHUTDOWN_SUSPEND.
- If dpm_suspend_noirq() fails it exits without resuming xenbus.
- If stop_machine() fails it exits without resuming xenbus or calling
  dpm_resume_end().
- xs_suspend()/xs_resume() and dpm_suspend_noirq()/dpm_resume_noirq() were not
  nested in the obvious way.

Fix by ensuring each failure case goto's the correct label. Treat a failure of
stop_machine() as a cancelled suspend in order to follow the correct resume
path.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
2009-12-03 11:14:56 -08:00
Ian Campbell
fed5ea87e0 xen: don't leak IRQs over suspend/resume.
On resume irq_info[*].evtchn is reset to 0 since event channel mappings
are not preserved over suspend/resume. The other contents of irq_info
is preserved to allow rebind_evtchn_irq() to function.

However when a device resumes it will try to unbind from the
previous IRQ (e.g.  blkfront goes blkfront_resume() -> blkif_free() ->
unbind_from_irqhandler() -> unbind_from_irq()). This will fail due to the
check for VALID_EVTCHN in unbind_from_irq() and the IRQ is leaked. The
device will then continue to resume and allocate a new IRQ, eventually
leading to find_unbound_irq() panic()ing.

Fix this by changing unbind_from_irq() to handle teardown of interrupts
which have type!=IRQT_UNBOUND but are not currently bound to a specific
event channel.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
2009-12-03 11:14:55 -08:00
Jeremy Fitzhardinge
922cc38ab7 xen: don't call dpm_resume_noirq() with interrupts disabled.
dpm_resume_noirq() takes a mutex, so it can't be called from a no-interrupt
context.  Don't call it from within the stop-machine function, but just
afterwards, since we're resuming anyway, regardless of what happened.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
2009-12-03 11:14:53 -08:00
Paolo Bonzini
ae78880129 xen: wait up to 5 minutes for device connetion
Increases the device timeout from 10s to 5 minutes, giving the user a
visual indication during that time in case there are problems.  The patch
is a backport of changesets 144 and 150 in the Xenbits tree.

Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-12-03 11:14:49 -08:00
Paolo Bonzini
f8dc33088f xen: improvement to wait_for_devices()
When printing a warning about a timed-out device, print the
current state of both ends of the device connection (i.e., backend as
well as frontend).  This backports half of changeset 146 from the
Xenbits tree.

Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-12-03 11:14:49 -08:00
Paolo Bonzini
c6e1971139 xen: fix is_disconnected_device/exists_disconnected_device
The logic of is_disconnected_device/exists_disconnected_device is wrong
in that they are used to test whether a device is trying to connect (i.e.
connecting).  For this reason the patch fixes them to not consider a
Closing or Closed device to be connecting.  At the same time the patch
also renames the functions according to what they really do; you could
say a closed device is "disconnected" (the old name), but not "connecting"
(the new name).

This patch is a backport of changeset 909 from the Xenbits tree.

Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-12-03 11:14:48 -08:00
Jeremy Fitzhardinge
db05fed0ad xen/xenbus: make DEVICE_ATTR()s static
They don't need to be global, and may cause linker clashes.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
2009-12-03 11:14:26 -08:00
Jeremy Fitzhardinge
1ccbf5344c xen: move Xen-testing predicates to common header
Move xen_domain and related tests out of asm-x86 to xen/xen.h so they
can be included whenever they are necessary.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-04 08:47:24 -08:00
Rusty Russell
d7d3756c5b cpumask: Use modern cpumask style in Xen
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
LKML-Reference: <200911031458.38406.rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-04 13:19:50 +01:00
Ian Campbell
4c31a78114 xenbus: do not hold transaction_mutex when returning to userspace
================================================
  [ BUG: lock held when returning to user space! ]
  ------------------------------------------------
  xenstore-list/3522 is leaving the kernel with locks still held!
  1 lock held by xenstore-list/3522:
   #0:  (&xs_state.transaction_mutex){......}, at: [<c026dc6f>] xenbus_dev_request_and_reply+0x8f/0xa0

The canonical fix for this type of issue appears to be to maintain a
count manually rather than using an rwsem so do that here.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-11-03 14:35:59 -08:00
Alexey Dobriyan
a99bbaf5ee headers: remove sched.h from poll.h
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-04 15:05:10 -07:00
Linus Torvalds
342ff1a1b5 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
  trivial: fix typo in aic7xxx comment
  trivial: fix comment typo in drivers/ata/pata_hpt37x.c
  trivial: typo in kernel-parameters.txt
  trivial: fix typo in tracing documentation
  trivial: add __init/__exit macros in drivers/gpio/bt8xxgpio.c
  trivial: add __init macro/ fix of __exit macro location in ipmi_poweroff.c
  trivial: remove unnecessary semicolons
  trivial: Fix duplicated word "options" in comment
  trivial: kbuild: remove extraneous blank line after declaration of usage()
  trivial: improve help text for mm debug config options
  trivial: doc: hpfall: accept disk device to unload as argument
  trivial: doc: hpfall: reduce risk that hpfall can do harm
  trivial: SubmittingPatches: Fix reference to renumbered step
  trivial: fix typos "man[ae]g?ment" -> "management"
  trivial: media/video/cx88: add __init/__exit macros to cx88 drivers
  trivial: fix typo in CONFIG_DEBUG_FS in gcov doc
  trivial: fix missing printk space in amd_k7_smp_check
  trivial: fix typo s/ketymap/keymap/ in comment
  trivial: fix typo "to to" in multiple files
  trivial: fix typos in comments s/DGBU/DBGU/
  ...
2009-09-22 07:51:45 -07:00
Jan Beulich
4481374ce8 mm: replace various uses of num_physpages by totalram_pages
Sizing of memory allocations shouldn't depend on the number of physical
pages found in a system, as that generally includes (perhaps a huge amount
of) non-RAM pages.  The amount of what actually is usable as storage
should instead be used as a basis here.

Some of the calculations (i.e.  those not intending to use high memory)
should likely even use (totalram_pages - totalhigh_pages).

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:38 -07:00
Joe Perches
a419aef8b8 trivial: remove unnecessary semicolons
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-21 15:14:58 +02:00