Commit graph

204 commits

Author SHA1 Message Date
Michael Reed
3a0c56d801 [SCSI] mptfc: correct out of order event processing
This patch corrects a problem in mptfc which can result in targets
being removed after executing an "lsiutil 99" reset of the fibre
channel ports.

The last rescan event was being processed before the setup reset work
due to an inappropriate optimization in the event processing logic.
Every rescan event is now queued for execution and the setup reset
work now executes in the proper sequence.

Signed-off-by: Michael Reed <mdr@sgi.com>
Acked-by: Moore, Eric <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06 15:48:31 -05:00
Michael Reed
77d88ee275 [SCSI] mptfc: properly wait for firmware target discovery to complete
Based upon a conversation I had with LSI's fibre channel firmware guru,
this patch adds another condition under which the driver waits for the
firmware link initialization / target discovery to complete.

Signed-off-by: Michael Reed <mdr@sgi.com>
Acked-by: Moore, Eric <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06 15:47:31 -05:00
Linus Torvalds
00ab956f2f Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (38 commits)
  [SCSI] More buffer->request_buffer changes
  [SCSI] mptfusion: bump version to 3.04.01
  [SCSI] mptfusion: misc fix's
  [SCSI] mptfusion: firmware download boot fix's
  [SCSI] mptfusion: task abort fix's
  [SCSI] mptfusion: sas nexus loss support
  [SCSI] mptfusion: sas loginfo update
  [SCSI] mptfusion: mptctl panic when loading
  [SCSI] mptfusion: sas enclosures with smart drive
  [SCSI] NCR_D700: misc fixes (section and argument ordering)
  [SCSI] scsi_debug: must_check fixes
  [SCSI] scsi_transport_sas: kill the use of channel 
  [SCSI] scsi_transport_sas: add expander backlink
  [SCSI] hide EH backup data outside the scsi_cmnd
  [SCSI] ibmvscsi: handle inactive SCSI target during probe
  [SCSI] ibmvscsi: allocate lpevents for ibmvscsi on iseries
  [SCSI] aic7[9x]xx: Remove last vestiges of reverse_scan
  [SCSI] aha152x: stop poking at saved scsi_cmnd members
  [SCSI] st.c: Improve sense output
  [SCSI] lpfc 8.1.7: Change version number to 8.1.7
  ...
2006-07-21 12:04:53 -07:00
Eric Moore
92c0bfea9b [SCSI] mptfusion: bump version to 3.04.01
bump version to 3.04.01

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-13 09:32:43 -04:00
Eric Moore
ba856d32f2 [SCSI] mptfusion: misc fix's
* removing obsolete 1066, 1066E from Kconfig
* initializing aen_event_read_flag after host reset
* remove oem references
* remove obsolete mpt_pq_filter command line option

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-13 09:32:09 -04:00
Eric Moore
0ccdb00759 [SCSI] mptfusion: firmware download boot fix's
Fix's to insure download boot could occur when
either channel of 1030 is reset. Necessary in order
for onboard controller in flashless environment
to become operational.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-13 09:31:23 -04:00
Eric Moore
3dc0b03fec [SCSI] mptfusion: task abort fix's
Fix's to insure proper status is returned to midlayer
when a task abort failed to be aborted by controller
firmware.

Also sanity checks to prevent scsi cmd from being
double completed during error recovery.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-13 09:30:49 -04:00
Eric Moore
bf4515227c [SCSI] mptfusion: sas nexus loss support
sas nexus loss support for systems that suport failover.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-13 09:27:18 -04:00
Eric Moore
4f766dc6d3 [SCSI] mptfusion: sas loginfo update
Adding more sas loginfo strings.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-13 09:19:05 -04:00
Eric Moore
d58b2725d2 [SCSI] mptfusion: mptctl panic when loading
Fix panic for when mptctl is loading at the same time
when one of the fusion llds (mptsas/mptfc/mptspi) is loading.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-13 09:18:22 -04:00
Eric Moore
786899b013 [SCSI] mptfusion: sas enclosures with smart drive
Adding support for sas enclosures with smart drives.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-13 09:13:13 -04:00
James Bottomley
e8bf39417b [SCSI] scsi_transport_sas: kill the use of channel
Using the port_id for the channel is completely unnecessary since the
host_id/target_id are constructed to be globally unique.  Also move
the mptsas driver on to virtual channel 1 for its raid devices.

Acked-by: "Moore, Eric" <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-12 09:20:01 -04:00
Adrian Bunk
e62c23c751 [PATCH] proper prototype for drivers/message/i2o/device.c:i2o_parm_issue()
Add a proper prototype for i2o_parm_issue() in core.h.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:26 -07:00
Eric Moore
dc22f16d4e [SCSI] mptsas: use unnumbered port API and remove driver porttracking
This allows us to be rid of the machinery in mptsas for creating and
tracking port numbers.  Since mptsas is merely inventing the numbers,
the SAS transport class may as well do it instead.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09 10:17:21 -05:00
James Bottomley
c4e00fac42 Merge ../scsi-misc-2.6
Conflicts:

	drivers/scsi/nsp32.c
	drivers/scsi/pcmcia/nsp_cs.c

Removal of randomness flag conflicts with SA_ -> IRQF_ global
replacement.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-03 09:41:12 -05:00
Thomas Gleixner
dace145374 [PATCH] irq-flags: misc drivers: Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:50 -07:00
James Bottomley
2686de27a3 [SCSI] mptsas: eliminate ghost devices
One of the current problems the mptsas driver has is that of "ghost"
devices (these are devices the firmware reports as existing, but what
they actually represent are the parents of a lower device), so for
example in my dual expander configuration, three expanders actually show
up, two for the real expanders but a third is created because the
firmware reports that the lower expander also has another expander
connected (which is simply the port going back to the upper expander).

The attached patch eliminates all these ghosts by not allocating any
devices for them if the SAS address is the SAS address of the parent.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-30 21:35:17 -05:00
Eric Moore
3e00a5b287 [SCSI] mptbase: mpt_interrupt should return IRQ_NONE
The way mpt_interrupt() was coded, it was impossible for the unhandled
interrupt detection logic to ever trigger. All interrupt handlers should
return IRQ_NONE when they have nothing to do.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andrew Morton <akpm@osdl.com>
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-30 21:29:23 -05:00
Eric Moore
376ac83078 [SCSI] mptsas: make two functions static
Make two needlessly global functions static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.com>
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-30 21:29:00 -05:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Adrian Bunk
80f7228b59 typo fixes: occuring -> occurring
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 18:27:16 +02:00
Linus Torvalds
602cada851 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/devfs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/devfs-2.6: (22 commits)
  [PATCH] devfs: Remove it from the feature_removal.txt file
  [PATCH] devfs: Last little devfs cleanups throughout the kernel tree.
  [PATCH] devfs: Rename TTY_DRIVER_NO_DEVFS to TTY_DRIVER_DYNAMIC_DEV
  [PATCH] devfs: Remove the tty_driver devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the line_driver devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the videodevice devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the gendisk devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the miscdevice devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the devfs_fs_kernel.h file from the tree
  [PATCH] devfs: Remove devfs_remove() function from the kernel tree
  [PATCH] devfs: Remove devfs_mk_cdev() function from the kernel tree
  [PATCH] devfs: Remove devfs_mk_bdev() function from the kernel tree
  [PATCH] devfs: Remove devfs_mk_symlink() function from the kernel tree
  [PATCH] devfs: Remove devfs_mk_dir() function from the kernel tree
  [PATCH] devfs: Remove devfs_*_tape() functions from the kernel tree
  [PATCH] devfs: Remove devfs support from the sound subsystem
  [PATCH] devfs: Remove devfs support from the ide subsystem.
  [PATCH] devfs: Remove devfs support from the serial subsystem
  [PATCH] devfs: Remove devfs from the init code
  [PATCH] devfs: Remove devfs from the partition code
  ...
2006-06-29 14:19:21 -07:00
Linus Torvalds
1903ac54f8 Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6:
  [PATCH] i386: export memory more than 4G through /proc/iomem
  [PATCH] 64bit Resource: finally enable 64bit resource sizes
  [PATCH] 64bit Resource: convert a few remaining drivers to use resource_size_t where needed
  [PATCH] 64bit resource: change pnp core to use resource_size_t
  [PATCH] 64bit resource: change pci core and arch code to use resource_size_t
  [PATCH] 64bit resource: change resource core to use resource_size_t
  [PATCH] 64bit resource: introduce resource_size_t for the start and end of struct resource
  [PATCH] 64bit resource: fix up printks for resources in misc drivers
  [PATCH] 64bit resource: fix up printks for resources in arch and core code
  [PATCH] 64bit resource: fix up printks for resources in pcmcia drivers
  [PATCH] 64bit resource: fix up printks for resources in video drivers
  [PATCH] 64bit resource: fix up printks for resources in ide drivers
  [PATCH] 64bit resource: fix up printks for resources in mtd drivers
  [PATCH] 64bit resource: fix up printks for resources in pci core and hotplug drivers
  [PATCH] 64bit resource: fix up printks for resources in networks drivers
  [PATCH] 64bit resource: fix up printks for resources in sound drivers
  [PATCH] 64bit resource: C99 changes for struct resource declarations

Fixed up trivial conflict in drivers/ide/pci/cmd64x.c (the printk that
was changed by the 64-bit resources had been deleted in the meantime ;)
2006-06-29 10:49:17 -07:00
James Bottomley
f28e71617d Merge ../linux-2.6/
Conflicts:

	drivers/scsi/aacraid/comminit.c

Fixed up by removing the now renamed CONFIG_IOMMU option from
aacraid

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 14:06:39 -04:00
Eric Moore
87cf898667 [SCSI] mptsas: Adding 1078 ROC support
* Adding 1078 ROC (Raid On Chip) Support - New host adapter

* Moving all PCI Vendor/Device ids to using internal defines; a request
from Christoph/James B. some time ago for when the next chip was added.

* Removing SAS 1066/1066E Vendor/Device IDs, as there are no plans to
manufacture that controller.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 12:41:52 -04:00
Eric Moore
547f9a2184 [SCSI] mptsas: wide port support
* Wide port support added - using James Bottomley's new SAS wide port API.
(There is a known problem in sas transport layer reported yesterday to
James. The Kobject dev.bus_ids for end devices are not unique across
expanders. I have added a work around in this patch, where I asigning
an unique port identifier for every port within the host - this solves
the problem, but I expect a fix from James in the sas transport).

* Adding target_alloc and target_destroy entry points, and moving code over
from the slave entry points.

* The renaming of some mptscsih_xxx functions declared in mptsas.c,
to mptsas_xxx.

* Target Reset moved from slave_destroy to hotplug work thread
handling (with regard to device removal). Also inhibit IO to end device
while device is being broken down . Talked to James Smart about this
at Linux Expo (with questions of how the fc transport handles this).

* Cleaning up the kzalloc's, and kfree's

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 12:41:33 -04:00
Eric Moore
2076eb6ab8 [SCSI] fusion : mpi header update
MPI Header Update

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 12:40:18 -04:00
Adrian Bunk
775d584c63 [PATCH] drivers/message/i2o/iop.c: unexport i2o_msg_nop()
It's available in a header as a static inline - there's no need to export it.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 17:32:48 -07:00
Jesper Juhl
8f76078037 [PATCH] Remove redundant NULL checks before [kv]free - in drivers/
Remove redundant NULL chck before kfree + tiny CodingStyle cleanup for
drivers/

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 17:32:48 -07:00
Greg Kroah-Hartman
e29419fffc [PATCH] 64bit resource: fix up printks for resources in misc drivers
This is needed if we wish to change the size of the resource structures.

Based on an original patch from Vivek Goyal <vgoyal@in.ibm.com>

Cc: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-27 09:23:59 -07:00
Greg Kroah-Hartman
ce7b0f46bb [PATCH] devfs: Remove the gendisk devfs_name field as it's no longer needed
And remove the now unneeded number field.
Also fixes all drivers that set these fields.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26 12:25:08 -07:00
Linus Torvalds
28e4b22495 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (85 commits)
  [SCSI] 53c700: remove reliance on deprecated cmnd fields
  [SCSI] hptiop: don't use cmnd->bufflen
  [SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver
  [SCSI] aacraid: small misc. cleanups
  [SCSI] aacraid: Update supported product information
  [SCSI] aacraid: Fix return code interpretation
  [SCSI] scsi_transport_sas: fix panic in sas_free_rphy
  [SCSI] remove RQ_SCSI_* flags
  [SCSI] remove scsi_request infrastructure
  [SCSI] mptfusion: change driver revision to 3.03.10
  [SCSI] mptfc: abort of board reset leaves port dead requiring reboot
  [SCSI] mptfc: fix fibre channel infinite request/response loop
  [SCSI] mptfc: set fibre channel fw target missing timers to one second
  [SCSI] mptfusion: move fc event/reset handling to mptfc
  [SCSI] spi transport: don't allow dt to be set on SE or HVD buses
  [SCSI] aic7xxx: expose the bus setting to sysfs
  [SCSI] scsi: remove Documentation/scsi/cpqfc.txt
  [SCSI] drivers/scsi: Use ARRAY_SIZE macro
  [SCSI] Remove last page_address from dc395x.c
  [SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver
  ...

Fixed up conflicts in drivers/message/fusion/mptbase.c manually (due to
the sparc interrupt cleanups)
2006-06-21 11:18:25 -07:00
David S. Miller
c6387a48cf [SPARC]: Kill __irq_itoa().
This ugly hack was long overdue to die.

It was a way to print out Sparc interrupts in a more freindly format,
since IRQ numbers were arbitrary opaque 32-bit integers which vectored
into PIL levels.  These 32-bit integers were not necessarily in the
0-->NR_IRQS range, but the PILs they vectored to were.

The idea now is that we will increase NR_IRQS a little bit and use a
virtual<-->real IRQ number mapping scheme similar to PowerPC.

That makes this IRQ printing hack irrelevant, and furthermore only a
handful of drivers actually used __irq_itoa() making it even less
useful.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-20 01:21:29 -07:00
Christoph Hellwig
beb4048750 [SCSI] remove scsi_request infrastructure
With Achim patch the last user (gdth) is switched away from scsi_request
so we an kill it now.  Also disables some code in i2o_scsi that was
broken since the sg driver stopped using scsi_requests.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-10 16:24:40 -05:00
Michael Reed
1951d099df [SCSI] mptfusion: change driver revision to 3.03.10
Bump driver version number to reflect addition of various
fibre channel patches.

Signed-off-by: Michael Reed <mdr@sgi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-10 16:02:21 -05:00
Michael Reed
d6be06c84d [SCSI] mptfc: abort of board reset leaves port dead requiring reboot
The driver uses msleep_interruptible() in the code path responsible
for resetting the card's ports via the lsiutil command.  If a
<ctrl-c> is received during the reset it can leave a port in such
a state that the only way to regain its use is to reboot the system.
Changing from msleep_interruptible() to msleep() corrects the problem.

Signed-off-by: Michael Reed <mdr@sgi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-10 16:01:52 -05:00
Michael Reed
419835e285 [SCSI] mptfc: fix fibre channel infinite request/response loop
While doing board reset testing I was able to put the system in
an infinite request/response loop between the scsi layer and
mptscsih_qcmd() by aborting the reset.  This patch installs
a "SETUP RESET" handler which calls fc_remote_port_delete()
for all registered rports.  This blocks the target which
prevents the loop.  Additionally, should the reset fail to
complete, the transport will now terminate i/o to the target.

Signed-off-by: Michael Reed <mdr@sgi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-10 16:00:03 -05:00
Michael Reed
ca2f938efe [SCSI] mptfc: set fibre channel fw target missing timers to one second
The fibre channel firmware provides a timer which is similar in purpose
to the fibre channel transport's device loss timer.  The effect of this
timer is to extend the total time that a target will be missing beyond
the value associated with the transport's timer.  This patch changes
the firmware timer to a default of one second which significantly reduces
the lag between when a target goes missing and the notification of the
fibre channel transport.

Signed-off-by: Michael Reed <mdr@sgi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-10 15:59:19 -05:00
Michael Reed
80d3ac77a8 [SCSI] mptfusion: move fc event/reset handling to mptfc
Move fibre channel event and reset handling to mptfc.  This will
result in fewer changes over time that need to be applied to
either mptbase.c or mptscsih.c.

Signed-off-by: Michael Reed <mdr@sgi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-10 15:58:37 -05:00
James Bottomley
f0cd91a68a Merge ../linux-2.6 2006-06-10 13:47:26 -05:00
Linus Torvalds
1f4d4a7e8f Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Avoid JBUS errors on some Niagara systems.
  [FUSION]: Fix mptspi.c build with CONFIG_PM not set.
  [TG3]: Handle Sun onboard tg3 chips more correctly.
  [SPARC64]: Dump local cpu registers in sun4v_log_error()
2006-06-10 11:03:51 -07:00
Markus Lidel
57a62fed87 [PATCH] I2O: Bugfixes to get I2O working again
From: Markus Lidel <Markus.Lidel@shadowconnect.com>

- Fixed locking of struct i2o_exec_wait in Executive-OSM

- Removed LCT Notify in i2o_exec_probe() which caused freeing memory and
  accessing freed memory during first enumeration of I2O devices

- Added missing locking in i2o_exec_lct_notify()

- removed put_device() of I2O controller in i2o_iop_remove() which caused
  the controller structure get freed to early

- Fixed size of mempool in i2o_iop_alloc()

- Fixed access to freed memory in i2o_msg_get()

See http://bugzilla.kernel.org/show_bug.cgi?id=6561

Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-10 11:02:05 -07:00
Tom "spot" Callaway
c29ca9d181 [FUSION]: Fix mptspi.c build with CONFIG_PM not set.
Signed-off-by: Tom "spot" Callaway <tcallawa@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-09 17:01:48 -07:00
Vivek Goyal
9bf0a28c9a [SCSI] kdump: mpt fusion driver initialization failure fix
MPT fusion driver initialization fails while second kernel is booting,
after a system crash (if kdump kernel is configured).  Oops message is
pasted below.

*****************************************************************************
Fusion MPT base driver 3.03.08
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SAS Host driver 3.03.08 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
mptbase: Initiating ioc0 bringup
BUG: unable to handle kernel paging request at virtual address 00002608
 printing eip:
c11782fd
*pde = 00000000
Oops: 0000 [#1]
Modules linked in:
CPU:    0
EIP:    0060:[<c11782fd>]    Not tainted VLI
EFLAGS: 00010046   (2.6.17-rc1-16M #2)
EIP is at mptscsih_io_done+0x27/0x3a3
eax: c4fed000   ebx: c4fed000   ecx: 00002600   edx: 00000298
esi: c11782d6   edi: 00002600   ebp: 00000000   esp: c1332f74
ds: 007b   es: 007b   ss: 0068
Process swapper (pid: 0, threadinfo=c1332000 task=c128f9c0) Stack: <0>0000006c 00000020 00000298 00002600 c4fed000 c4fed000 c11782d6 0000260 0
       00000000 c1172c49 c4fed000 c1305b40 00000005 00000000 c1172d75 c48877e0
       c1029687 00000000 c1307fb8 00000000 c1305a00 00000001 00000000 c1307fb8
Call Trace:
 <c11782d6> mptscsih_io_done+0x0/0x3a3   <c1172c49> mpt_turbo_reply+0xbb/0xd3
 <c1172d75> mpt_interrupt+0x22/0x2b   <c1029687> misrouted_irq+0x63/0xcb
 <c10297b3> note_interrupt+0x43/0x98   <c10292f9> __do_IRQ+0x68/0x8f
 <c1003fac> do_IRQ+0x36/0x4e
 =======================
 <c1002aa6> common_interrupt+0x1a/0x20   <c1001150> mwait_idle+0x1a/0x2a
 <c10010bf> cpu_idle+0x40/0x5c   <c1308610> start_kernel+0x17a/0x17c Code: 5e 5f 5d c3 55 89 cd 57 56 53 83 ec 14 89 54 24 0c 89 44 24 10 8b 90 cc 00  00 00 8b 4c 24 0c 81 c2 98 02 00 00 85 ed 89 54 24 08 <0f> b7 79 08 89 fe 74 04  0f b7 75 08 66 39 f7 75 0d 8b 44 24 0c
*******************************************************************************

o Kdump capture kernel boot fails during initialization of MPT fusion driver.
  (LSI Logic / Symbios Logic SAS1064E PCI-Express Fusion-MPT SAS (rev 01))

o Problem is easily reproducible, if system crashed while some disk activity
  like cp operation was going on.

o After a system crash, devices are not shutdown and capture kernel starts
  booting while skipping BIOS. Hence underlying device is left in operational
  state. In this case scsi contoller was left with interrupt line asserted
  reply FIFO was not empty. When driver starts initializing in the second
  kernel, it receives the interrupt the moment request_irq() is called.
  Interrupt handler, reads the message from reply FIFO and tries to access
  the associated message frame and panics, as in the new kernel's context
  that message frame is not valid at all.

o In this scenario, probably we should delay the request_irq() call. First
  bring up the IOC, reset it if needed and then should register for irq.

o I have tested the patch with SAS1064E and 53c1030 controllers.

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Acked-by: "Moore, Eric Dean" <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-31 10:33:49 -05:00
James Bottomley
4ff42a669a [SCSI] mptspi: reset handler shouldn't be called for other bus protocols
All registered reset callback handlers are called during reset processing.
The mptspi modules has its own reset callback handler, just recently
added for issuing domain validation after host reset.  If either the mptsas or
mptfc driver are loaded, this callback could be called. Thus resulting
in domain validation being issued for sas or fibre end devices.

Fix this by having mptbase.c check the bus type against the driver
type and only call the reset handler if they match (or if it's a
non-bus specific reset handler).

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-19 16:43:08 -05:00
mdr@sgi.com
6dd727da92 [SCSI] mptfc: race between mptfc_register_dev and mptfc_target_alloc
A race condition exists in mptfc between the thread registering a device
with the fc transport and the scan work generated by the transport.
This race existed prior to the application of the mptfc bug fix patch.

mptfc_register_dev() calls fc_remote_port_add() with the FC_RPORT_ROLE_TARGET
bit set in the rport ids passed to the function.  Having this bit set causes
fc_remote_port_add() to schedule a scan of the device.

This scan can execute before mptfc_register_dev() can fill in the dd_data
in the rport structure.  When this happens, mptfc_target_alloc() will fail
because dd_data is null.

Attached is a patch which fixes the problem.  The patch changes the rport ids
passed to fc_remote_port_add() to not have the TARGET bit set.  This prevents
the scan from being scheduled.  After mptfc_register_dev() fills in the rport
dd_data field, fc_remote_port_rolechg() is called, changing the role of the
rport to TARGET.  Thus, the scan is scheduled after dd_data is filled
in which prevents the failure in mptfc_target_alloc().

Signed-off-by: Michael Reed <mdr@sgi.com>
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-10 09:54:42 -05:00
Eric Moore
6e1cad0276 [SCSI] mptspi: revalidate negotiation parameters after host reset and resume
This is a bug fix for mptspi driver, where after a host reset or
resume, we revalidate the negotiation parameters for all devices.
This bug was introduced when the driver was ported to use the spi
transport layer.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-03 12:11:51 -05:00
Eric Moore
509e5e5d20 [SCSI] fusion - bug fix stack overflow in mptbase
Bug fix for stack overflow in EventDescriptionStr, (a function
for debuging firmware events).  We allocated 50 bytes on local stack
for buff[], however there are places in the code where we've attempted
copying in greater than 50 bytes into buff[].

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-27 13:59:30 -05:00
Moore, Eric
65207fedcf [SCSI] - fusion - mptfc bug fix's to prevent deadlock situations
mptbase.h

	bump version number to 3.03.09

	remove unneeded flags
	define workq and remove old fc specific locks

mptbase.c

	initialize new lock and don't initialize two removed locks

mptscsih.c

	when firmware reports target is no longer there, return
        DID_REQUEUE for fc hosts so that i/o doesn't get killed until
        the transport has an opportunity to manage the loss via its
        dev loss timer

	when the "eh_abort" routine is called, check to see if the
        driver has the command or not before looking to see if a reset
        is pending.  James Smart and I talked about this and believe
        that the API for this routine is: if driver doesn't have
        command, return SUCCESS.  This change helps prevent a target
        from being taken offline.  SUCCESS is returned because it's
        likely that the command completed after error recovery timed
        it out but before it could be aborted.

	provide a routine to queue work to newly created workq, and
        use it.

	remove "ioc" from mptscsih_abort() it was only used one time.
	the other references were via hd->ioc, so I just moved it....
	net change in references to ioc via hd->ioc is zero

	move hd->resetPending test and hd->timeouts increment to after
	the test for whether the command to be aborted remains known
	to the driver

	Make certain that the workq exists before queuing work to it.

mptfc.c

	no longer need to lock rport data structures as I was able to
	single thread the code!  I fixed up the debug code to
	eliminate compilation messages due to type mismatch in the
	printk.  Got rid of some no longer needed rport flags.
	Initialize and destroy the workq used for the rescan work.

	simplify the logic regarding the increment of
        fc_rescan_work_count.  use post increment and test for zero
        vs. pre increment and test for one; eliminate work_count
        variable: queue_work can be called with the work_lock held as
        it doesn't sleep

Signed-off-by: Michael Reed <mdr@sgi.com>
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-25 18:07:32 -05:00
Moore, Eric
bd23e94cd7 [SCSI] mptfusion: bug fix's for raid components adding/deleting
This patch handles case where raid hidden components
are not being removed when power turned off to device
attached to expander, as well as the case of
exposing raid components when power is turned back on
to devices attached to an expander.  (This is a repost
of this patch, with  mptsas_is_end_device declared
further up in the code.)

This patch contains some other miscellaneous bug fix's.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-25 18:00:39 -05:00