Commit Graph

2354 Commits (8d5c68362f7d77cdffdf12ab7516a6eb77a5dd90)

Author SHA1 Message Date
Tsutomu Itoh 013bd4c336 Btrfs: fix return value check of extent_io_ops
This patch adds the check on the return value of extent_io_ops.

Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
2012-02-16 17:23:16 +01:00
Florian Albrechtskirchinger 12fc9d0923 btrfs: honor umask when creating subvol root
Set the subvol root inode permissions based on the current umask.
2012-02-16 16:35:41 +01:00
David Sterba 8a33442694 btrfs: silence warning in raid array setup
Raid array setup code creates an extent buffer in an usual way. When the
PAGE_CACHE_SIZE is > super block size, the extent pages are not marked
up-to-date, which triggers a WARN_ON in the following
write_extent_buffer call. Add an explicit up-to-date call to silence the
warning.

Signed-off-by: David Sterba <dsterba@suse.cz>
2012-02-15 16:40:25 +01:00
David Sterba c08782dacd btrfs: fix structs where bitfields and spinlock/atomic share 8B word
On ia64, powerpc64 and sparc64 the bitfield is modified through a RMW cycle and current
gcc rewrites the adjacent 4B word, which in case of a spinlock or atomic has
disaterous effect.

https://lkml.org/lkml/2012/2/1/220

Signed-off-by: David Sterba <dsterba@suse.cz>
2012-02-15 16:40:25 +01:00
Jeff Mahoney 87826df0ec btrfs: delalloc for page dirtied out-of-band in fixup worker
We encountered an issue that was easily observable on s/390 systems but
 could really happen anywhere. The timing just seemed to hit reliably
 on s/390 with limited memory.

 The gist is that when an unexpected set_page_dirty() happened, we'd
 run into the BUG() in btrfs_writepage_fixup_worker since it wasn't
 properly set up for delalloc.

 This patch does the following:
 - Performs the missing delalloc in the fixup worker
 - Allow the start hook to return -EBUSY which informs __extent_writepage
   that it should mark the page skipped and not to redirty it. This is
   required since the fixup worker can fail with -ENOSPC and the page
   will have already been redirtied. That causes an Oops in
   drop_outstanding_extents later. Retrying the fixup worker could
   lead to an infinite loop. Deferring the page redirty also saves us
   some cycles since the page would be stuck in a resubmit-redirty loop
   until the fixup worker completes. It's not harmful, just wasteful.
 - If the fixup worker fails, we mark the page and mapping as errored,
   and end the writeback, similar to what we would do had the page
   actually been submitted to writeback.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
2012-02-15 16:40:25 +01:00
Tsutomu Itoh a7e221e900 Btrfs: fix memory leak in load_free_space_cache()
load_free_space_cache() has forgotten to free path.

Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
2012-02-15 16:40:24 +01:00
Arne Jansen 859acaf1a2 btrfs: don't check DUP chunks twice
Because scrub enumerates the dev extent tree to find the chunks to scrub,
it currently finds each DUP chunk twice and also scrubs it twice. This
patch makes sure that scrub_chunk only checks that part of the chunk the
dev extent has been found for. This only changes the behaviour for DUP
chunks.

Reported-and-tested-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Arne Jansen <sensille@gmx.net>
2012-02-15 16:40:24 +01:00
Liu Bo 2cac13e41b Btrfs: fix trim 0 bytes after a device delete
A user reported a bug of btrfs's trim, that is we will trim 0 bytes
after a device delete.

The reproducer:

$ mkfs.btrfs disk1
$ mkfs.btrfs disk2
$ mount disk1 /mnt
$ fstrim -v /mnt
$ btrfs device add disk2 /mnt
$ btrfs device del disk1 /mnt
$ fstrim -v /mnt

This is because after we delete the device, the block group may start from
a non-zero place, which will confuse trim to discard nothing.

Reported-by: Lutz Euler <lutz.euler@freenet.de>
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
2012-02-15 16:40:23 +01:00
Jeff Liu 6af021d8fc Btrfs: return the internal error unchanged if btrfs_get_extent_fiemap() call failed for SEEK_DATA/SEEK_HOLE inquiry
Given that ENXIO only means "offset beyond EOF" for either SEEK_DATA or SEEK_HOLE inquiry
in a desired file range, so we should return the internal error unchanged if btrfs_get_extent_fiemap()
call failed, rather than ENXIO.

Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
2012-02-15 16:40:23 +01:00
Jan Schmidt 8f24b49688 Btrfs: avoid positive number with ERR_PTR
inode_ref_info() returns 1 when the element wasn't found and < 0 on error,
just like btrfs_search_slot(). In iref_to_path() it's an error when the
inode ref can't be found, thus we return ERR_PTR(ret) in that case. In order
to avoid ERR_PTR(1), we now set ret to -ENOENT in that case.

Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2012-02-15 16:40:23 +01:00
Keith Mannthey 941b2ddf71 btrfs: Sector Size check during Mount
Gracefully fail when trying to mount a BTRFS file system that has a
sectorsize smaller than PAGE_SIZE.

On PPC it is possible to build a FS while using a 4k PAGE_SIZE kernel
then boot into a 64K PAGE_SIZE kernel.  Presently open_ctree fails in an
endless loop and hangs the machine in this situation.

My debugging has show this Sector size < Page size to be a non trivial
situation and a graceful exit from the situation would be nice for the
time being.

Signed-off-by: Keith Mannthey <kmannth@us.ibm.com>
2012-02-15 16:40:22 +01:00
Jesper Juhl 3e93b8dfd9 BTRFS: Don't include disk-io.h twice in check-integrity.c
Once should be enough.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-10 09:52:19 +01:00
Masanari Iida 934e7d44b8 btrfs: Fix typo in free-space-cache.c
Correct spelling "cace" to "cache" in
fs/btrfs/free-space-cache.c

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-09 23:09:36 +01:00
Chris Mason d98456fcaf Btrfs: don't reserve data with extents locked in btrfs_fallocate
btrfs_fallocate tries to allocate space only if ranges in the file don't
already exist.  But the enospc checks it does are not allowed with
extents locked.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-31 20:27:41 -05:00
Linus Torvalds 67d2433ee7 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix reservations in btrfs_page_mkwrite
  Btrfs: advance window_start if we're using a bitmap
  btrfs: mask out gfp flags in releasepage
  Btrfs: fix enospc error caused by wrong checks of the chunk
  Btrfs: do not defrag a file partially
  Btrfs: fix warning for 32-bit build of fs/btrfs/check-integrity.c
  Btrfs: use cluster->window_start when allocating from a cluster bitmap
  Btrfs: Check for NULL page in extent_range_uptodate
  btrfs: Fix busyloops in transaction waiting code
  Btrfs: make sure a bitmap has enough bytes
  Btrfs: fix uninit warning in backref.c
2012-01-28 17:00:19 -08:00
Chris Mason 9998eb7034 Btrfs: fix reservations in btrfs_page_mkwrite
Josef fixed btrfs_page_mkwrite to properly release reserved
extents if there was an error.  But if we fail to get a reservation
and we fail to dirty the inode (for ENOSPC reasons), we'll end up
trying to release a reservation we never had.

This makes sure we only release if we were able to reserve.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-27 10:44:44 -05:00
Josef Bacik 9b23062840 Btrfs: advance window_start if we're using a bitmap
If we span a long area in a bitmap we could end up taking a lot of time
searching to the next free area if we're searching from the original
window_start, so advance window_start in order to make sure we don't do any
superficial searching.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-26 15:01:12 -05:00
David Sterba 0c4e538bcc btrfs: mask out gfp flags in releasepage
btree_releasepage is a callback and can be passed unknown gfp flags and then
they may end up in kmem_cache_alloc called from alloc_extent_state, slab
allocator will BUG_ON when there is HIGHMEM or DMA32 flag set.

This may happen when btrfs is mounted from a loop device, which masks out
__GFP_IO flag. The check in try_release_extent_state

3399                 if ((mask & GFP_NOFS) == GFP_NOFS)
3400                         mask = GFP_NOFS;

will not work and passes unfiltered flags further resulting in crash at
mm/slab.c:2963

 [<000000000024ae4c>] cache_alloc_refill+0x3b4/0x5c8
 [<000000000024c810>] kmem_cache_alloc+0x204/0x294
 [<00000000001fd3c2>] mempool_alloc+0x52/0x170
 [<000003c000ced0b0>] alloc_extent_state+0x40/0xd4 [btrfs]
 [<000003c000cee5ae>] __clear_extent_bit+0x38a/0x4cc [btrfs]
 [<000003c000cee78c>] try_release_extent_state+0x9c/0xd4 [btrfs]
 [<000003c000cc4c66>] btree_releasepage+0x7e/0xd0 [btrfs]
 [<0000000000210d84>] shrink_page_list+0x6a0/0x724
 [<0000000000211394>] shrink_inactive_list+0x230/0x578
 [<0000000000211bb8>] shrink_list+0x6c/0x120
 [<0000000000211e4e>] shrink_zone+0x1e2/0x228
 [<0000000000211f24>] shrink_zones+0x90/0x254
 [<0000000000213410>] do_try_to_free_pages+0xac/0x420
 [<0000000000213ae0>] try_to_free_pages+0x13c/0x1b0
 [<0000000000204e6c>] __alloc_pages_nodemask+0x5b4/0x9a8
 [<00000000001fb04a>] grab_cache_page_write_begin+0x7e/0xe8

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-26 15:01:12 -05:00
Miao Xie 9e622d6bea Btrfs: fix enospc error caused by wrong checks of the chunk
When we did sysbench test for inline files, enospc error happened easily though
there was lots of free disk space which could be allocated for new chunks.

Reproduce steps:
 # mkfs.btrfs -b $((2 * 1024 * 1024 * 1024)) <test partition>
 # mount <test partition> /mnt
 # ulimit -n 102400
 # cd /mnt
 # sysbench --num-threads=1 --test=fileio --file-num=81920 \
 > --file-total-size=80M --file-block-size=1K --file-io-mode=sync \
 > --file-test-mode=seqwr prepare
 # sysbench --num-threads=1 --test=fileio --file-num=81920 \
 > --file-total-size=80M --file-block-size=1K --file-io-mode=sync \
 > --file-test-mode=seqwr run
 <soon later, BUG_ON() was triggered by enospc error>

The reason of this bug is:
Now, we can reserve space which is larger than the free space in the chunks if
we have enough free disk space which can be used for new chunks. By this way,
the space allocator should allocate a new chunk by force if there is no free
space in the free space cache. But there are two wrong checks which break this
operation.

One is
	if (ret == -ENOSPC && num_bytes > min_alloc_size)
in btrfs_reserve_extent(), it is wrong, we should try to allocate a new chunk
even we fail to allocate free space by minimum allocable size.

The other is
	if (space_info->force_alloc)
		force = space_info->force_alloc;
in do_chunk_alloc(). It makes the allocator ignore CHUNK_ALLOC_FORCE If someone
sets ->force_alloc to CHUNK_ALLOC_LIMITED, and makes the enospc error happen.

Fix these two wrong checks. Especially the second one, we fix it by changing
the value of CHUNK_ALLOC_LIMITED and CHUNK_ALLOC_FORCE, and make
CHUNK_ALLOC_FORCE greater than CHUNK_ALLOC_LIMITED since CHUNK_ALLOC_FORCE has
higher priority. And if the value which is passed in by the caller is greater
than ->force_alloc, use the passed value.

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-26 15:01:12 -05:00
Liu Bo 7ec31b548a Btrfs: do not defrag a file partially
xfstests 218 complains that btrfs defrags a file partially:
 After: 1
 Write backwards sync, but contiguous - should defrag to 1 extent
 Before: 10
-After: 1
+After: 2

To fix this, we need to set max_to_defrag count properly.

Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-26 15:01:12 -05:00
Stefan Behrens 0b485143d8 Btrfs: fix warning for 32-bit build of fs/btrfs/check-integrity.c
There have been 4 warnings on 32-bit build, they are herewith fixed.

Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-26 15:01:11 -05:00
Josef Bacik 0b4a9d248f Btrfs: use cluster->window_start when allocating from a cluster bitmap
We specifically set window_start in the cluster struct to indicate where the
cluster starts in a bitmap, but we've been using min_start to indicate where
we're searching from.  This is usually the start of the blockgroup, so
essentially means we're constantly searching from the start of any bitmap we
find, which completely negates all the trouble we go to in order to setup a
cluster.  So start using window_start to make sure we actually use the area we
found.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-26 15:01:11 -05:00
Mitch Harder 8bedd51b61 Btrfs: Check for NULL page in extent_range_uptodate
A user has encountered a NULL pointer kernel oops in btrfs when
encountering media errors.  The problem has been identified
as an unhandled NULL pointer returned from find_get_page().
This modification simply checks for a NULL page, and returns
with an error if found (the extent_range_uptodate() function
returns 1 on errors).

After testing this patch, the user reported that the error with
the NULL pointer oops was solved.  However, there is still a
remaining problem with a thread becoming stuck in
wait_on_page_locked(page) in the read_extent_buffer_pages(...)
function in extent_io.c

       for (i = start_i; i < num_pages; i++) {
               page = extent_buffer_page(eb, i);
               wait_on_page_locked(page);
               if (!PageUptodate(page))
                       ret = -EIO;
       }

This patch leaves the issue with the locked page yet to be resolved.

Signed-off-by: Mitch Harder <mitch.harder@sabayonlinux.org>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-26 15:01:11 -05:00
Jan Kara 6dd70ce4eb btrfs: Fix busyloops in transaction waiting code
wait_log_commit() and wait_for_writer() were using slightly different
conditions for deciding whether they should call schedule() and whether they
should continue in the wait loop. Thus it could happen that we busylooped when
the first condition was not true while the second one was. That is burning CPU
cycles needlessly and is deadly on UP machines...

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-26 15:01:11 -05:00
Josef Bacik 357b9784b7 Btrfs: make sure a bitmap has enough bytes
We have only been checking for min_bytes available in bitmap entries, but we
won't successfully setup a bitmap cluster unless it has at least bytes in the
bitmap, so in the common case min_bytes is 4k and we want something like 2MB, so
if there are a bunch of bitmap entries with less than 2mb's in them, we'll
search all them anyway, which is suboptimal.  Fix this check.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-26 15:01:11 -05:00
Jan Schmidt b1375d64c5 Btrfs: fix uninit warning in backref.c
Added initialization with the declaration of ret. It isn't set later on the
switch-default branch (which should never be taken).

Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-26 15:01:11 -05:00
Linus Torvalds d65773b22b Merge branch 'btrfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
* 'btrfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  btrfs: take allocation of ->tree_root into open_ctree()
  btrfs: let ->s_fs_info point to fs_info, not root...
  btrfs: consolidate failure exits in btrfs_mount() a bit
  btrfs: make free_fs_info() call ->kill_sb() unconditional
  btrfs: merge free_fs_info() calls on fill_super failures
  btrfs: kill pointless reassignment of ->s_fs_info in btrfs_fill_super()
  btrfs: make open_ctree() return int
  btrfs: sanitizing ->fs_info, part 5
  btrfs: sanitizing ->fs_info, part 4
  btrfs: sanitizing ->fs_info, part 3
  btrfs: sanitizing ->fs_info, part 2
  btrfs: sanitizing ->fs_info, part 1
  btrfs: fix a deadlock in btrfs_scan_one_device()
  btrfs: fix mount/umount race
  btrfs: get ->kill_sb() of its own
  btrfs: preparation to fixing mount/umount race
2012-01-17 15:52:51 -08:00
Linus Torvalds f9156c7288 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (62 commits)
  Btrfs: use larger system chunks
  Btrfs: add a delalloc mutex to inodes for delalloc reservations
  Btrfs: space leak tracepoints
  Btrfs: protect orphan block rsv with spin_lock
  Btrfs: add allocator tracepoints
  Btrfs: don't call btrfs_throttle in file write
  Btrfs: release space on error in page_mkwrite
  Btrfs: fix btrfsck error 400 when truncating a compressed
  Btrfs: do not use btrfs_end_transaction_throttle everywhere
  Btrfs: add balance progress reporting
  Btrfs: allow for resuming restriper after it was paused
  Btrfs: allow for canceling restriper
  Btrfs: allow for pausing restriper
  Btrfs: add skip_balance mount option
  Btrfs: recover balance on mount
  Btrfs: save balance parameters to disk
  Btrfs: soft profile changing mode (aka soft convert)
  Btrfs: implement online profile changing
  Btrfs: do not reduce profile in do_chunk_alloc()
  Btrfs: virtual address space subset filter
  ...

Fix up trivial conflict in fs/btrfs/ioctl.c due to the use of the new
mnt_drop_write_file() helper.
2012-01-17 15:49:54 -08:00
Chris Mason 96bdc7dc61 Btrfs: use larger system chunks
system chunks by default are very small.  This makes them slightly
larger and also fixes the conditional checks to make sure we don't
allocate a billion of them at once.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-16 15:38:24 -05:00
Josef Bacik f248679e86 Btrfs: add a delalloc mutex to inodes for delalloc reservations
I was using i_mutex for this, but we're getting bogus lockdep warnings by doing
that and theres no real way to get rid of those, so just stop using i_mutex to
protect delalloc metadata reservations and use a delalloc mutex instead.  This
shouldn't be contended often at all, only if you are writing and mmap writing to
the file at the same time.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
2012-01-16 15:29:43 -05:00
Josef Bacik 8c2a3ca20f Btrfs: space leak tracepoints
This in addition to a script in my btrfs-tracing tree will help track down space
leaks when we're getting space left over in block groups on umount.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
2012-01-16 15:29:43 -05:00
Josef Bacik 90290e1982 Btrfs: protect orphan block rsv with spin_lock
We've been seeing warnings coming out of the orphan commit stuff forever from
ceph.  Turns out it's because we're racing with checking if the orphan block
reserve is set, because we clear it outside of the spin_lock.  So leave the
normal fastpath checks where they are, but take the spin_lock and _recheck_ to
make sure we haven't had an orphan block rsv added in the meantime.  Then clear
the root's orphan block rsv and release the lock.  With this patch a user said
the warnings went away and they usually showed up pretty soon after he started
ceph.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
2012-01-16 15:29:42 -05:00
Josef Bacik 3f7de037fb Btrfs: add allocator tracepoints
I used these tracepoints when figuring out what the cluster stuff was doing, so
add them to mainline in case we need to profile this stuff again.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
2012-01-16 15:29:42 -05:00
Josef Bacik 45a8090e62 Btrfs: don't call btrfs_throttle in file write
Btrfs_throttle will make us wait if there is a currently committing transaction
until we can open new transactions, which is ridiculous since we don't actually
start any transactions within the file write path anyway, so all this does is
introduce big latencies if we have a sync/fsync heavy workload going on while
somebody else is trying to do work.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-16 15:28:55 -05:00
Josef Bacik ec39e180fd Btrfs: release space on error in page_mkwrite
If updating the inode gave us an ENOSPC we were just returning in page_mkwrite,
which is a problem since we make our reservation right before trying to update
the inode, so fix the out label so that we actually free our reservation.
Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-16 15:28:54 -05:00
Miao Xie f70a9a6b94 Btrfs: fix btrfsck error 400 when truncating a compressed
Reproduce steps:
 # mkfs.btrfs /dev/sdb5
 # mount /dev/sdb5 -o compress=lzo /mnt
 # dd if=/dev/zero of=/mnt/tmpfile bs=128K count=1
 # sync
 # truncate -s 64K /mnt/tmpfile
 root 5 inode 257 errors 400

This is because of the wrong if condition, which is used to check if we should
subtract the bytes of the dropped range from i_blocks/i_bytes of i-node or not.
When we truncate a compressed extent, btrfs substracts the bytes of the whole
extent, it's wrong. We should substract the real size that we truncate, no
matter it is a compressed extent or not. Fix it.

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-16 15:28:54 -05:00
Josef Bacik 7ad85bb76a Btrfs: do not use btrfs_end_transaction_throttle everywhere
A user reported a problem where things like open with O_CREAT would take up to
30 seconds when he had nfs activity on the same mount.  This is because all of
our quick metadata operations, like create, symlink etc all do
btrfs_end_transaction_throttle, which if the transaction is blocked will wait
for the commit to complete before it returns.  This adds a ridiculous amount of
latency and isn't really needed.  The normal btrfs_end_transaction will mark the
transaction as blocked and wake the transaction kthread up if it thinks the
transaction needs to end (this being in the running out of global reserve space
scenario), and this is all that is really needed since we've already done
everything we're going to do, we just need to return.  This should help people
with the latency they were seeing when using synchronous heavy workloads.
Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-16 15:28:54 -05:00
Chris Mason c126dea771 Merge branch 'integrity-check-patch-v2' of git://btrfs.giantdisaster.de/git/btrfs into integration
Conflicts:
	fs/btrfs/ctree.h
	fs/btrfs/super.c

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-16 15:27:58 -05:00
Chris Mason 9785dbdf26 Merge branch 'for-chris' of git://git.jan-o-sch.net/btrfs-unstable into integration 2012-01-16 15:26:31 -05:00
Chris Mason d756bd2d93 Merge branch 'for-chris' of git://repo.or.cz/linux-btrfs-devel into integration
Conflicts:
	fs/btrfs/volumes.c

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-16 15:26:17 -05:00
Chris Mason 27263e2832 Merge branch 'restriper' of git://github.com/idryomov/btrfs-unstable into integration 2012-01-16 15:26:02 -05:00
Ilya Dryomov 19a39dce3b Btrfs: add balance progress reporting
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:49 +02:00
Ilya Dryomov de322263d3 Btrfs: allow for resuming restriper after it was paused
Recognize BTRFS_BALANCE_RESUME flag passed from userspace.  We use the
same heuristics used when recovering balance after a crash to try to
start where we left off last time.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:49 +02:00
Ilya Dryomov a7e99c691a Btrfs: allow for canceling restriper
Implement an ioctl for canceling restriper.  Currently we wait until
relocation of the current block group is finished, in future this can be
done by triggering a commit.  Balance item is deleted and no memory
about the interrupted balance is kept.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:49 +02:00
Ilya Dryomov 837d5b6e46 Btrfs: allow for pausing restriper
Implement an ioctl for pausing restriper.  This pauses the relocation,
but balance is still considered to be "in progress": balance item is
not deleted, other volume operations cannot be started, etc.  If paused
in the middle of profile changing operation we will continue making
allocations with the target profile.

Add a hook to close_ctree() to pause restriper and free its data
structures on unmount.  (It's safe to unmount when restriper is in
"paused" state, we will resume with the same parameters on the next
mount)

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:49 +02:00
Ilya Dryomov 9555c6c180 Btrfs: add skip_balance mount option
Since restriper kthread starts involuntarily on mount and can suck cpu
and memory bandwidth add a mount option to forcefully skip it.  The
restriper in that case hangs around in paused state and can be resumed
from userspace when it's convenient.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:48 +02:00
Ilya Dryomov 596410151e Btrfs: recover balance on mount
On mount, if balance item is found, resume balance in a separate
kernel thread.

Try to be smart to continue roughly where previous balance (or convert)
was interrupted.  For chunk types that were being converted to some
profile we turn on soft convert, in case of a simple balance we turn on
usage filter and relocate only less-than-90%-full chunks of that type.
These are just heuristics but they help quite a bit, and can be improved
in future.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:48 +02:00
Ilya Dryomov 0940ebf6b9 Btrfs: save balance parameters to disk
Introduce a new btree objectid for storing balance item.  The reason is
to be able to resume restriper after a crash with the same parameters.
Balance item has a very high objectid and goes into tree of tree roots.

The key for the new item is as follows:

	[ BTRFS_BALANCE_OBJECTID ; BTRFS_BALANCE_ITEM_KEY ; 0 ]

Older kernels simply ignore it so it's safe to mount with an older
kernel and then go back to the newer one.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:48 +02:00
Ilya Dryomov cfa4c961cc Btrfs: soft profile changing mode (aka soft convert)
When doing convert from one profile to another if soft mode is on
restriper won't touch chunks that already have the profile we are
converting to.  This is useful if e.g. half of the FS was converted
earlier.

The soft mode switch is (like every other filter) per-type.  This means
that we can convert for example meta chunks the "hard" way while
converting data chunks selectively with soft switch.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:48 +02:00
Ilya Dryomov e4d8ec0f65 Btrfs: implement online profile changing
Profile changing is done by launching a balance with
BTRFS_BALANCE_CONVERT bits set and target fields of respective
btrfs_balance_args structs initialized.  Profile reducing code in this
case will pick restriper's target profile if it's available instead of
doing a blind reduce.  If target profile is not yet available it goes
back to a plain reduce.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:48 +02:00
Ilya Dryomov 70922617b0 Btrfs: do not reduce profile in do_chunk_alloc()
Every caller of do_chunk_alloc() feeds it the reduced allocation
profile, so stop trying to reduce it one more time.  Instead check the
validity of the passed profile.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:48 +02:00
Ilya Dryomov ea67176ae8 Btrfs: virtual address space subset filter
Select chunks which have at least one byte located inside a given
[vstart, vend) virtual address space range.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:48 +02:00
Ilya Dryomov 94e60d5a5c Btrfs: devid subset filter
Select chunks which have at least one byte of at least one stripe
located on a device with devid X in a given [pstart,pend) physical
address range.

This filter only works when devid filter is turned on.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:48 +02:00
Ilya Dryomov 409d404b46 Btrfs: devid filter
Relocate chunks which have at least one stripe located on a device with
devid X.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:47 +02:00
Ilya Dryomov 5ce5b3c091 Btrfs: usage filter
Select chunks that are less than X percent full.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:47 +02:00
Ilya Dryomov ed25e9b26f Btrfs: profiles filter
Select chunks based on a given profile mask.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:47 +02:00
Ilya Dryomov f43ffb60fd Btrfs: add basic infrastructure for selective balancing
This allows to have a separate set of filters for each chunk type
(data,meta,sys).  The code however is generic and switch on chunk type
is only done once.

This commit also adds a type filter: it allows to balance for example
meta and system chunks w/o touching data ones.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:47 +02:00
Ilya Dryomov c9e9f97bdf Btrfs: add basic restriper infrastructure
Add basic restriper infrastructure: extended balancing ioctl and all
related ioctl data structures, add data structure for tracking
restriper's state to fs_info, etc.  The semantics of the old balancing
ioctl are fully preserved.

Explicitly disallow any volume operations when balance is in progress.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:47 +02:00
Ilya Dryomov 10ea00f55a Btrfs: make avail_*_alloc_bits fields dynamic
Currently when new chunks are created respective avail_alloc_bits field
is updated to reflect profiles of all chunks present in the system.
However when chunks are removed profile bits are never cleared.

This patch clears profile bit of respective avail_alloc_bits field when
the last chunk with that profile is removed.  Restriper needs this to
properly operate when "downgrading".

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:47 +02:00
Ilya Dryomov a46d11a8b0 Btrfs: add BTRFS_AVAIL_ALLOC_BIT_SINGLE bit
Right now on-disk BTRFS_BLOCK_GROUP_* profile bits are used for
avail_{data,metadata,system}_alloc_bits fields, which gather info about
available allocation profiles in the FS.  When chunk is created or read
from disk, its profile is OR'ed with the corresponding avail_alloc_bits
field.  Since SINGLE is denoted by 0 in the on-disk format, currently
there is no way to tell when such chunks become avaialble.  Restriper
needs that information, so add a separate bit for SINGLE profile.

This bit is going to be in-memory only, it should never be written out
to disk, so it's not a disk format change.  However to avoid remappings
in future, reserve corresponding on-disk bit.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:47 +02:00
Ilya Dryomov 52ba692972 Btrfs: introduce masks for chunk type and profile
Chunk's type and profile are encoded in u64 flags field.  Introduce
masks to easily access them.  Also fix the type of BTRFS_BLOCK_GROUP_*
constants, it should be ULL.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:47 +02:00
Ilya Dryomov 6fef8df1dc Btrfs: get rid of *_alloc_profile fields
{data,metadata,system}_alloc_profile fields have been unused for a long
time now.  Get rid of them.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:47 +02:00
Mel Gorman a6bc32b899 mm: compaction: introduce sync-light migration for use by compaction
This patch adds a lightweight sync migrate operation MIGRATE_SYNC_LIGHT
mode that avoids writing back pages to backing storage.  Async compaction
maps to MIGRATE_ASYNC while sync compaction maps to MIGRATE_SYNC_LIGHT.
For other migrate_pages users such as memory hotplug, MIGRATE_SYNC is
used.

This avoids sync compaction stalling for an excessive length of time,
particularly when copying files to a USB stick where there might be a
large number of dirty pages backed by a filesystem that does not support
->writepages.

[aarcange@redhat.com: This patch is heavily based on Andrea's work]
[akpm@linux-foundation.org: fix fs/nfs/write.c build]
[akpm@linux-foundation.org: fix fs/btrfs/disk-io.c build]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andy Isaacson <adi@hexapodia.org>
Cc: Nai Xia <nai.xia@gmail.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:09 -08:00
Mel Gorman b969c4ab9f mm: compaction: determine if dirty pages can be migrated without blocking within ->migratepage
Asynchronous compaction is used when allocating transparent hugepages to
avoid blocking for long periods of time.  Due to reports of stalling,
there was a debate on disabling synchronous compaction but this severely
impacted allocation success rates.  Part of the reason was that many dirty
pages are skipped in asynchronous compaction by the following check;

	if (PageDirty(page) && !sync &&
		mapping->a_ops->migratepage != migrate_page)
			rc = -EBUSY;

This skips over all mapping aops using buffer_migrate_page() even though
it is possible to migrate some of these pages without blocking.  This
patch updates the ->migratepage callback with a "sync" parameter.  It is
the responsibility of the callback to fail gracefully if migration would
block.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andy Isaacson <adi@hexapodia.org>
Cc: Nai Xia <nai.xia@gmail.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:09 -08:00
Li Zefan b367e47fb3 Btrfs: fix possible deadlock when opening a seed device
The correct lock order is uuid_mutex -> volume_mutex -> chunk_mutex,
but when we mount a filesystem which has backing seed devices, we have
this lock chain:

    open_ctree()
        lock(chunk_mutex);
        read_chunk_tree();
            read_one_dev();
                open_seed_devices();
                    lock(uuid_mutex);

and then we hit a lockdep splat.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2012-01-11 10:26:54 +08:00
Li Zefan c7c144db53 Btrfs: update global block_rsv when creating a new block group
A bug was triggered while using seed device:

    # mkfs.btrfs /dev/loop1
    # btrfstune -S 1 /dev/loop1
    # mount -o /dev/loop1 /mnt
    # btrfs dev add /dev/loop2 /mnt

btrfs: block rsv returned -28
------------[ cut here ]------------
WARNING: at fs/btrfs/extent-tree.c:5969 btrfs_alloc_free_block+0x166/0x396 [btrfs]()
...
Call Trace:
...
[<f7b7c31c>] btrfs_cow_block+0x101/0x147 [btrfs]
[<f7b7eaa6>] btrfs_search_slot+0x1b8/0x55f [btrfs]
[<f7b7f844>] btrfs_insert_empty_items+0x42/0x7f [btrfs]
[<f7b7f8c1>] btrfs_insert_item+0x40/0x7e [btrfs]
[<f7b8ac02>] btrfs_make_block_group+0x243/0x2aa [btrfs]
[<f7bb3f53>] __btrfs_alloc_chunk+0x672/0x70e [btrfs]
[<f7bb41ff>] init_first_rw_device+0x77/0x13c [btrfs]
[<f7bb5a62>] btrfs_init_new_device+0x664/0x9fd [btrfs]
[<f7bbb65a>] btrfs_ioctl+0x694/0xdbe [btrfs]
[<c04f55f7>] do_vfs_ioctl+0x496/0x4cc
[<c04f5660>] sys_ioctl+0x33/0x4f
[<c07b9edf>] sysenter_do_call+0x12/0x38
---[ end trace 906adac595facc7d ]---

Since seed device is readonly, there's no usable space in the filesystem.
Afterwards we add a sprout device to it, and the kernel creates a METADATA
block group and a SYSTEM block group where comes free space we can reserve,
but we still get revervation failure because the global block_rsv hasn't
been updated accordingly.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2012-01-11 10:26:52 +08:00
Li Zefan 7fe1e64150 Btrfs: rewrite btrfs_trim_block_group()
There are various bugs in block group trimming:

- It may trim from offset smaller than user-specified offset.
- It may trim beyond user-specified range.
- It may leak free space for extents smaller than specified minlen.
- It may truncate the last trimmed extent thus leak free space.
- With mixed extents+bitmaps, some extents may not be trimmed.
- With mixed extents+bitmaps, some bitmaps may not be trimmed (even
none will be trimmed). Even for those trimmed, not all the free space
in the bitmaps will be trimmed.

I rewrite btrfs_trim_block_group() and break it into two functions.
One is to trim extents only, and the other is to trim bitmaps only.

Before patching:

	# fstrim -v /mnt/
	/mnt/: 1496465408 bytes were trimmed

After patching:

	# fstrim -v /mnt/
	/mnt/: 2193768448 bytes were trimmed

And this matches the total free space:

	# btrfs fi df /mnt
	Data: total=3.58GB, used=1.79GB
	System, DUP: total=8.00MB, used=4.00KB
	System: total=4.00MB, used=0.00
	Metadata, DUP: total=205.12MB, used=97.14MB
	Metadata: total=8.00MB, used=0.00

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2012-01-11 10:26:48 +08:00
Li Zefan ec9ef7a13b Btrfs: simplfy calculation of stripe length for discard operation
For btrfs raid, while discarding a range of space, we'll need to know
the start offset and length to discard for each device, and it's done
in btrfs_map_block().

However the calculation is a bit complex for raid0 and raid10, so I
reimplement it based on a fact that:

        dev1          dev2           dev3    (raid0)
        -----------------------------------
        s0 s3 s6      s1 s4 s7       s2 s5

Each device has (total_stripes / nr_dev) stripes, or plus one.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2012-01-11 10:26:46 +08:00
Li Zefan de11cc12df Btrfs: don't pre-allocate btrfs bio
We pre-allocate a btrfs bio with fixed size, and then may re-allocate
memory if we find stripes are bigger than the fixed size. But this
pre-allocation is not necessary.

Also we don't have to calcuate the stripe number twice.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2012-01-11 10:26:44 +08:00
Li Zefan 125ccb0ae6 Btrfs: don't pass a trans handle unnecessarily in volumes.c
Some functions never use the transaction handle passed to them.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2012-01-11 10:26:42 +08:00
Li Zefan 4da6f1a332 Btrfs: reserve metadata space in btrfs_ioctl_setflags()
Check and reserve space for btrfs_update_inode().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2012-01-11 10:26:39 +08:00
Li Zefan f062abf089 Btrfs: remove BUG_ON()s in btrfs_ioctl_setflags()
We can recover from errors and return -errno to user space.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2012-01-11 10:26:38 +08:00
Li Zefan 706efc6630 Btrfs: check the return value of io_ctl_init()
It can return -ENOMEM.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2012-01-11 10:26:36 +08:00
Li Zefan a1ee5a4581 Btrfs: avoid possible NULL deref in io_ctl_drop_pages()
If we run into some failure path in io_ctl_prepare_pages(),
io_ctl->pages[] array may have some NULL pointers.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2012-01-11 10:26:34 +08:00
Li Zefan db804f23a7 Btrfs: add pinned extents to on-disk free space cache correctly
I got this while running xfstests:

[24256.836098] block group 317849600 has an wrong amount of free space
[24256.836100] btrfs: failed to load free space cache for block group 317849600

We should clamp the extent returned by find_first_extent_bit(),
so the start of the extent won't smaller than the start of the
block group.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2012-01-11 10:26:31 +08:00
Li Zefan d25223a0d2 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs into for-linus 2012-01-11 09:54:49 +08:00
Linus Torvalds 001a541ea9 Merge branch 'writeback-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux
* 'writeback-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
  writeback: move MIN_WRITEBACK_PAGES to fs-writeback.c
  writeback: balanced_rate cannot exceed write bandwidth
  writeback: do strict bdi dirty_exceeded
  writeback: avoid tiny dirty poll intervals
  writeback: max, min and target dirty pause time
  writeback: dirty ratelimit - think time compensation
  btrfs: fix dirtied pages accounting on sub-page writes
  writeback: fix dirtied pages accounting on redirty
  writeback: fix dirtied pages accounting on sub-page writes
  writeback: charge leaked page dirties to active tasks
  writeback: Include all dirty inodes in background writeback
2012-01-10 16:59:59 -08:00
Johannes Weiner e3a41a5ba9 btrfs: pass __GFP_WRITE for buffered write page allocations
Tell the page allocator that pages allocated for a buffered write are
expected to become dirty soon.

Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10 16:30:44 -08:00
Al Viro f84a8bd60e btrfs: take allocation of ->tree_root into open_ctree()
now that we don't need it for sget() anymore...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-08 19:37:02 -05:00
Al Viro 815745cf3e btrfs: let ->s_fs_info point to fs_info, not root...
the latter can be obtained from the former (by looking as ->tree_root)
just as cheaply as we currently are doing the other way round.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-08 19:35:37 -05:00
Al Viro 59553edf11 btrfs: consolidate failure exits in btrfs_mount() a bit
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-08 19:34:41 -05:00
Al Viro d22ca7de77 btrfs: make free_fs_info() call ->kill_sb() unconditional
... and don't bother with it after btrfs_fill_super() failure -
->kill_sb() (unlike ->put_super()) will be called even if we
have not got non-NULL ->s_root.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-08 19:34:41 -05:00
Al Viro be7e0950de btrfs: merge free_fs_info() calls on fill_super failures
... all the way up into btrfs_mount().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-08 19:34:40 -05:00
Al Viro 29db78aa0a btrfs: kill pointless reassignment of ->s_fs_info in btrfs_fill_super()
We do not (fortunately) modify ->s_fs_info of superblock on the fly in
btrfs_fill_super(); apparent assignment is a no-op.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-08 19:34:40 -05:00
Al Viro ad2b2c802b btrfs: make open_ctree() return int
It returns either ERR_PTR(-ve) or sb->s_fs_info.  The latter can
be found by caller just as well, TYVM, no need to return it.  Just
return -ve or 0...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-08 19:34:39 -05:00
Al Viro e3029d9fd4 btrfs: sanitizing ->fs_info, part 5
close_ctree() uses a weird mix of accesses to root->fs_info and
its value at the beginning of function stored in local variable.
Since ->fs_info *never* changes, let's just use the local variable
to avoid confusion.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-08 19:34:38 -05:00
Al Viro 6f07e42ee6 btrfs: sanitizing ->fs_info, part 4
A new helper: btrfs_alloc_root(fs_info); allocates btrfs_root
and sets ->fs_info.  All places allocating the suckers converted
to it.  At that point we *never* reassign ->fs_info of btrfs_root;
it's set before anyone sees the address of newly allocated
struct btrfs_root and never assigned anywhere else.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-08 19:34:38 -05:00
Al Viro 38a77db49a btrfs: sanitizing ->fs_info, part 3
move assignments to ->fs_info in open_ctree() up, to the place
just after the original allocations.  Assignment for tree_root
becomes a no-op - we'd obtained fs_info from tree_root->fs_info
in the first place.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-08 19:34:37 -05:00
Al Viro 1233f546ec btrfs: sanitizing ->fs_info, part 2
lift assignment to callers of find_and_setup_root()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-08 19:34:37 -05:00
Al Viro 2eb34cd368 btrfs: sanitizing ->fs_info, part 1
take assignment of ->fs_info to callers of __setup_root()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-08 19:34:36 -05:00
Al Viro 10f6327b5d btrfs: fix a deadlock in btrfs_scan_one_device()
pathname resolution under a global mutex, taken on some paths in ->mount()
is a Bad Idea(tm) - think what happens if said pathname resolution triggers
automount of some btrfs instance and walks into attempt to grab the same
mutex.  Deadlock - we are waiting for daemon to finish walking the path,
daemon is waiting for us to release the mutex...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-08 19:33:24 -05:00
Al Viro 6de1d09d96 btrfs: fix mount/umount race
Do *NOT* skip doomed superblocks in btrfs_test_super(); we want
sget() to wait for their shutdown to complete.  Since we don't
mutilate ->s_fs_info in ->put_super() anymore (or free what it
used to point to until the superblock is past being findable
by sget()), we can just DTRT there and report a match.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-08 19:33:23 -05:00
Al Viro aea52e19dd btrfs: get ->kill_sb() of its own
... and move free_fs_info() to that, out of ->put_super().  Do NOT
set ->s_fs_info to NULL in the latter; we need it for sget() to
be able to see and wait for fs in the middle of umount if we get a
mount/umount race.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-08 19:33:23 -05:00
Al Viro 98c7089c76 btrfs: preparation to fixing mount/umount race
We need fs_info and root to live until the moment when the victim
superblock leaves the list, so we need to postpone free_fs_info()
until after ->put_super().  The call is buried in close_ctree(),
though, so we need to lift it into the callers (including
btrfs_put_super()) first.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-08 19:33:22 -05:00
Linus Torvalds 98793265b4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (53 commits)
  Kconfig: acpi: Fix typo in comment.
  misc latin1 to utf8 conversions
  devres: Fix a typo in devm_kfree comment
  btrfs: free-space-cache.c: remove extra semicolon.
  fat: Spelling s/obsolate/obsolete/g
  SCSI, pmcraid: Fix spelling error in a pmcraid_err() call
  tools/power turbostat: update fields in manpage
  mac80211: drop spelling fix
  types.h: fix comment spelling for 'architectures'
  typo fixes: aera -> area, exntension -> extension
  devices.txt: Fix typo of 'VMware'.
  sis900: Fix enum typo 'sis900_rx_bufer_status'
  decompress_bunzip2: remove invalid vi modeline
  treewide: Fix comment and string typo 'bufer'
  hyper-v: Update MAINTAINERS
  treewide: Fix typos in various parts of the kernel, and fix some comments.
  clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR
  gpio: Kconfig: drop unknown symbol 'CS5535_GPIO'
  leds: Kconfig: Fix typo 'D2NET_V2'
  sound: Kconfig: drop unknown symbol ARCH_CLPS7500
  ...

Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new
kconfig additions, close to removed commented-out old ones)
2012-01-08 13:21:22 -08:00
Linus Torvalds eb59c505f8 Merge branch 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
* 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits)
  PM / Hibernate: Implement compat_ioctl for /dev/snapshot
  PM / Freezer: fix return value of freezable_schedule_timeout_killable()
  PM / shmobile: Allow the A4R domain to be turned off at run time
  PM / input / touchscreen: Make st1232 use device PM QoS constraints
  PM / QoS: Introduce dev_pm_qos_add_ancestor_request()
  PM / shmobile: Remove the stay_on flag from SH7372's PM domains
  PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resume
  PM / shmobile: Add support for the sh7372 A4S power domain / sleep mode
  PM: Drop generic_subsys_pm_ops
  PM / Sleep: Remove forward-only callbacks from AMBA bus type
  PM / Sleep: Remove forward-only callbacks from platform bus type
  PM: Run the driver callback directly if the subsystem one is not there
  PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers
  PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412.
  PM / Sleep: Merge internal functions in generic_ops.c
  PM / Sleep: Simplify generic system suspend callbacks
  PM / Hibernate: Remove deprecated hibernation snapshot ioctls
  PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled()
  ARM: S3C64XX: Implement basic power domain support
  PM / shmobile: Use common always on power domain governor
  ...

Fix up trivial conflict in fs/xfs/xfs_buf.c due to removal of unused
XBT_FORCE_SLEEP bit
2012-01-08 13:10:57 -08:00
Alexandre Oliva 1bb91902dc Btrfs: revamp clustered allocation logic
Parameterize clusters on minimum total size, minimum chunk size and
minimum contiguous size for at least one chunk, without limits on
cluster, window or gap sizes.  Don't tolerate any fragmentation for
SSD_SPREAD; accept it for metadata, but try to keep data dense.

Signed-off-by: Alexandre Oliva <oliva@lsd.ic.unicamp.br>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-07 19:15:15 -05:00
Alexandre Oliva fc7c1077ce Btrfs: don't set up allocation result twice
We store the allocation start and length twice in ins, once right
after the other, but with intervening calls that may prevent the
duplicate from being optimized out by the compiler.  Remove one of the
assignments.

Signed-off-by: Alexandre Oliva <oliva@lsd.ic.unicamp.br>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-07 19:15:14 -05:00
Al Viro 34c80b1d93 vfs: switch ->show_options() to struct dentry *
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-06 23:19:54 -05:00
Alexandre Oliva a5f6f719a5 Btrfs: test free space only for unclustered allocation
Since the clustered allocation may be taking extents from a different
block group, there's no point in spin-locking and testing the current
block group free space before attempting to allocate space from a
cluster, even more so when we might refrain from even trying the
cluster in the current block group because, after the cluster was set
up, not enough free space remained.  Furthermore, cluster creation
attempts fail fast when the block group doesn't have enough free
space, so the test was completely superfluous.

I've move the free space test past the cluster allocation attempt,
where it is more useful, and arranged for a cluster in the current
block group to be released before trying an unclustered allocation,
when we reach the LOOP_NO_EMPTY_SIZE stage, so that the free space in
the cluster stands a chance of being combined with additional free
space in the block group so as to succeed in the allocation attempt.

Signed-off-by: Alexandre Oliva <oliva@lsd.ic.unicamp.br>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-06 15:48:21 -05:00
Chris Mason 1100373f8a Btrfs: use bigger metadata chunks on bigger filesystems
The 256MB chunk is a little small on a huge FS.  This scales up the
chunk size.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-06 15:47:38 -05:00
Chris Mason cf1d72c9ce Btrfs: lower the bar for chunk allocation
The chunk allocation code has tried to keep a pretty tight lid on creating new
metadata chunks.  This is partially because in the past the reservation
code didn't give us an accurate idea of how much space was being used.

The new code is much more accurate, so we're able to get rid of some of these
checks.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-06 15:41:34 -05:00
Chris Mason 203bf287cb Btrfs: run chunk allocations while we do delayed refs
Btrfs tries to batch extent allocation tree changes to improve performance
and reduce metadata trashing.  But it doesn't allocate new metadata chunks
while it is doing allocations for the extent allocation tree.

This commit changes the delayed refence code to do chunk allocations if we're
getting low on room.  It prevents crashes and improves performance.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-06 15:23:57 -05:00
Jan Schmidt 6bf7e080d5 Btrfs: make sure we're not using obsolete code in btrfs_get_extent
There's code in btrfs_get_extent that should never be used. This patch turns
a WARN_ON(1) into a BUG(), hoping we can remove the transaction code from
btrfs_get_extent soon.

Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2012-01-05 15:11:55 +01:00
Jan Schmidt 4692cf58aa Btrfs: new backref walking code
The old backref iteration code could only safely be used on commit roots.
Besides this limitation, it had bugs in finding the roots for these
references. This commit replaces large parts of it by btrfs_find_all_roots()
which a) really finds all roots and the correct roots, b) works correctly
under heavy file system load, c) considers delayed refs.

Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2012-01-05 10:49:43 +01:00
Jan Schmidt 8da6d5815c Btrfs: added btrfs_find_all_roots()
This function gets a byte number (a data extent), collects all the leafs
pointing to it and walks up the trees to find all fs roots pointing to those
leafs. It also returns the list of all leafs pointing to that extent.

It does proper locking for the involved trees, can be used on busy file
systems and honors delayed refs.

Signed-off-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2012-01-04 16:26:38 +01:00
Jan Schmidt a168650c08 Btrfs: add waitqueue instead of doing busy waiting for more delayed refs
Now that we may be holding back delayed refs for a limited period, we
might end up having no runnable delayed refs. Without this commit, we'd
do busy waiting in that thread until another (runnable) ref arives.
Instead, we're detecting this situation and use a waitqueue, such that
we only try to run more refs after
	a) another runnable ref was added  or
	b) delayed refs are no longer held back

Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2012-01-04 16:12:48 +01:00
Arne Jansen d1270cd91f Btrfs: put back delayed refs that are too new
When processing a delayed ref, first check if there are still old refs in
the process of being added. If so, put this ref back to the tree. To avoid
looping on this ref, choose a newer one in the next loop.
btrfs_find_ref_cluster has to take care of that.

Signed-off-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2012-01-04 16:12:45 +01:00
Arne Jansen 00f04b8879 Btrfs: add sequence numbers to delayed refs
Sequence numbers are needed to reconstruct the backrefs of a given extent to
a certain point in time. The total set of backrefs consist of the set of
backrefs recorded on disk plus the enqueued delayed refs for it that existed
at that moment.

This patch also adds a list that records all delayed refs which are
currently in the process of being added.

When walking all refs of an extent in btrfs_find_all_roots(), we freeze the
current state of delayed refs, honor anythinh up to this point and prevent
processing newer delayed refs to assert consistency.

Signed-off-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2012-01-04 16:12:42 +01:00
Arne Jansen 5b25f70f42 Btrfs: add nested locking mode for paths
This patch adds the possibilty to read-lock an extent even if it is already
write-locked from the same thread. btrfs_find_all_roots() needs this
capability.

Signed-off-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2012-01-04 16:12:29 +01:00
Al Viro 175a4eb7ea fs: propagate umode_t, misc bits
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:55:10 -05:00
Al Viro 1a67aafb5f switch ->mknod() to umode_t
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:54 -05:00
Al Viro 4acdaf27eb switch ->create() to umode_t
vfs_create() ignores everything outside of 16bit subset of its
mode argument; switching it to umode_t is obviously equivalent
and it's the only caller of the method

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:53 -05:00
Al Viro 18bb1db3e7 switch vfs_mkdir() and ->mkdir() to umode_t
vfs_mkdir() gets int, but immediately drops everything that might not
fit into umode_t and that's the only caller of ->mkdir()...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:53 -05:00
Al Viro 6b520e0565 vfs: fix the stupidity with i_dentry in inode destructors
Seeing that just about every destructor got that INIT_LIST_HEAD() copied into
it, there is no point whatsoever keeping this INIT_LIST_HEAD in inode_init_once();
the cost of taking it into inode_init_always() will be negligible for pipes
and sockets and negative for everything else.  Not to mention the removal of
boilerplate code from ->destroy_inode() instances...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:52:40 -05:00
Al Viro 2a79f17e4a vfs: mnt_drop_write_file()
new helper (wrapper around mnt_drop_write()) to be used in pair with
mnt_want_write_file().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:52:40 -05:00
Al Viro e407699ef5 btrfs, nfs, apparmor: don't pull mnt_namespace.h for no reason...
it's not needed anymore; we used to, back when we had to do
mount_subtree() by hand, complete with put_mnt_ns() in it.
No more...  Apparmor didn't need it since the __d_path() fix.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:52:38 -05:00
Al Viro a561be7100 switch a bunch of places to mnt_want_write_file()
it's both faster (in case when file has been opened for write) and cleaner.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:52:35 -05:00
Rafael J. Wysocki b7ba68c4a0 Merge branch 'pm-sleep' into pm-for-linus
* pm-sleep: (51 commits)
  PM: Drop generic_subsys_pm_ops
  PM / Sleep: Remove forward-only callbacks from AMBA bus type
  PM / Sleep: Remove forward-only callbacks from platform bus type
  PM: Run the driver callback directly if the subsystem one is not there
  PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers
  PM / Sleep: Merge internal functions in generic_ops.c
  PM / Sleep: Simplify generic system suspend callbacks
  PM / Hibernate: Remove deprecated hibernation snapshot ioctls
  PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled()
  PM / Sleep: Recommend [un]lock_system_sleep() over using pm_mutex directly
  PM / Sleep: Replace mutex_[un]lock(&pm_mutex) with [un]lock_system_sleep()
  PM / Sleep: Make [un]lock_system_sleep() generic
  PM / Sleep: Use the freezer_count() functions in [un]lock_system_sleep() APIs
  PM / Freezer: Remove the "userspace only" constraint from freezer[_do_not]_count()
  PM / Hibernate: Replace unintuitive 'if' condition in kernel/power/user.c with 'else'
  Freezer / sunrpc / NFS: don't allow TASK_KILLABLE sleeps to block the freezer
  PM / Sleep: Unify diagnostic messages from device suspend/resume
  ACPI / PM: Do not save/restore NVS on Asus K54C/K54HR
  PM / Hibernate: Remove deprecated hibernation test modes
  PM / Hibernate: Thaw processes in SNAPSHOT_CREATE_IMAGE ioctl test path
  ...

Conflicts:
	kernel/kmod.c
2011-12-25 23:42:20 +01:00
Linus Torvalds 827fa4c762 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: call d_instantiate after all ops are setup
  Btrfs: fix worker lock misuse in find_worker
2011-12-23 14:58:39 -08:00
Chris Mason c1111b1fce Merge branch 'integration' into for-linus 2011-12-23 11:51:00 -05:00
Al Viro 08c422c27f Btrfs: call d_instantiate after all ops are setup
This closes races where btrfs is calling d_instantiate too soon during
inode creation.  All of the callers of btrfs_add_nondir are updated to
instantiate after the inode is fully setup in memory.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-12-23 08:02:26 -05:00
Chris Mason 8d532b2afb Btrfs: fix worker lock misuse in find_worker
Dan Carpenter noticed that we were doing a double unlock on the worker
lock, and sometimes picking a worker thread without the lock held.

This fixes both errors.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
2011-12-23 07:53:00 -05:00
Arne Jansen eebe063b7f Btrfs: always save ref_root in delayed refs
For consistent backref walking and (later) qgroup calculation the
information to which root a delayed ref belongs is useful even for shared
refs.

Signed-off-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-12-22 16:22:28 +01:00
Arne Jansen 66d7e7f09f Btrfs: mark delayed refs as for cow
Add a for_cow parameter to add_delayed_*_ref and pass the appropriate value
from every call site. The for_cow parameter will later on be used to
determine if a ref will change anything with respect to qgroups.

Delayed refs coming from relocation are always counted as for_cow, as they
don't change subvol quota.

Also pass in the fs_info for later use.

btrfs_find_all_roots() will use this as an optimization, as changes that are
for_cow will not change anything with respect to which root points to a
certain leaf. Thus, we don't need to add the current sequence number to
those delayed refs.

Signed-off-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-12-22 16:22:27 +01:00
Jan Schmidt c7d22a3c3c Btrfs: added helper btrfs_next_item()
btrfs_next_item() makes the btrfs path point to the next item, crossing leaf
boundaries if needed.

Signed-off-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-12-22 16:22:26 +01:00
Arne Jansen da5c813564 Btrfs: generic data structure to build unique lists
ulist is a generic data structures to hold a collection of unique u64
values. The only operations it supports is adding to the list and
enumerating it.

It is possible to store an auxiliary value along with the key. The
implementation is preliminary and can probably be sped up significantly.

It is used by btrfs_find_all_roots() quota to translate recursions into
iterative loops.

Signed-off-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-12-22 16:22:24 +01:00
Rafael J. Wysocki b00f4dc5ff Merge branch 'master' into pm-sleep
* master: (848 commits)
  SELinux: Fix RCU deref check warning in sel_netport_insert()
  binary_sysctl(): fix memory leak
  mm/vmalloc.c: remove static declaration of va from __get_vm_area_node
  ipmi_watchdog: restore settings when BMC reset
  oom: fix integer overflow of points in oom_badness
  memcg: keep root group unchanged if creation fails
  nilfs2: potential integer overflow in nilfs_ioctl_clean_segments()
  nilfs2: unbreak compat ioctl
  cpusets: stall when updating mems_allowed for mempolicy or disjoint nodemask
  evm: prevent racing during tfm allocation
  evm: key must be set once during initialization
  mmc: vub300: fix type of firmware_rom_wait_states module parameter
  Revert "mmc: enable runtime PM by default"
  mmc: sdhci: remove "state" argument from sdhci_suspend_host
  x86, dumpstack: Fix code bytes breakage due to missing KERN_CONT
  IB/qib: Correct sense on freectxts increment and decrement
  RDMA/cma: Verify private data length
  cgroups: fix a css_set not found bug in cgroup_attach_proc
  oprofile: Fix uninitialized memory access when writing to writing to oprofilefs
  Revert "xen/pv-on-hvm kexec: add xs_reset_watches to shutdown watches from old kernel"
  ...

Conflicts:
	kernel/cgroup_freezer.c
2011-12-21 21:59:45 +01:00
Stefan Behrens 21adbd5cbb Btrfs: integrate integrity check module into btrfs
This is the last part of the patch series. It modifies the btrfs
code to use the integrity check module if configured to do so
with the define BTRFS_FS_CHECK_INTEGRITY. If this define is not set,
the only effective change is that code is added that handles the
mount option to activate the integrity check. If the mount option is
set and the define BTRFS_FS_CHECK_INTEGRITY is not set, that code
complains in the log and the mount fails with EINVAL.

Add the mount option to activate the usage of the integrity check
code.
Add invocation of btrfs integrity check code init and cleanup
function on mount and umount, respectively.
Add hook to call btrfs integrity check code version of
submit_bh/submit_bio.

Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2011-12-21 19:14:17 +01:00
Stefan Behrens f11e4d7f53 Btrfs: Makefile changes to optionally include btrfs integrity check
If the btrfs integrity check is enabled, the files required to
implement the checks are included in the build.

Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2011-12-21 19:14:16 +01:00
Stefan Behrens c975dd469d Btrfs: add config option to enable btrfs integrity check
Added the BTRFS_FS_CHECK_INTEGRITY option to Kconfig. It depends on
BTRFS_FS.

Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2011-12-21 19:14:16 +01:00
Stefan Behrens 5db0276014 Btrfs: add optional integrity check code
The two files added in this patch contain all the code that is
required to implement the integrity checks.

Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2011-12-21 19:14:09 +01:00
Wu Fengguang 32c7f202a4 btrfs: fix dirtied pages accounting on sub-page writes
When doing 1KB sequential writes to the same page,
balance_dirty_pages_ratelimited_nr() should be called once instead of 4
times, the latter makes the dirtier tasks be throttled much too heavy.

Fix it with proper de-accounting on clear_page_dirty_for_io().

CC: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-12-18 14:20:25 +08:00
Linus Torvalds c9a7fe9672 Merge branches 'for-linus' and 'for-linus-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: unplug every once and a while
  Btrfs: deal with NULL srv_rsv in the delalloc inode reservation code
  Btrfs: only set cache_generation if we setup the block group
  Btrfs: don't panic if orphan item already exists
  Btrfs: fix leaked space in truncate
  Btrfs: fix how we do delalloc reservations and how we free reservations on error
  Btrfs: deal with enospc from dirtying inodes properly
  Btrfs: fix num_workers_starting bug and other bugs in async thread
  BTRFS: Establish i_ops before calling d_instantiate
  Btrfs: add a cond_resched() into the worker loop
  Btrfs: fix ctime update of on-disk inode
  btrfs: keep orphans for subvolume deletion
  Btrfs: fix inaccurate available space on raid0 profile
  Btrfs: fix wrong disk space information of the files
  Btrfs: fix wrong i_size when truncating a file to a larger size
  Btrfs: fix btrfs_end_bio to deal with write errors to a single mirror

* 'for-linus-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  btrfs: lower the dirty balance poll interval
2011-12-16 12:15:50 -08:00
Wu Fengguang 142349f541 btrfs: lower the dirty balance poll interval
Tests show that the original large intervals can easily make the dirty
limit exceeded on 100 concurrent dd's. So adapt to as large as the
next check point selected by the dirty throttling algorithm.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-12-16 12:32:57 -05:00
Chris Mason d85c8a6f1b Btrfs: unplug every once and a while
The btrfs io submission threads can build up massive plug lists.  This
keeps things more reasonable so we don't hand over huge dumps of IO at
once.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-12-15 15:38:41 -05:00
Chris Mason 567a45e917 Merge branch 'for-chris' of http://git.kernel.org/pub/scm/linux/kernel/git/josef/btrfs-work into integration
Conflicts:
	fs/btrfs/inode.c

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-12-15 13:43:49 -05:00
Chris Mason e755d9ab38 Btrfs: deal with NULL srv_rsv in the delalloc inode reservation code
btrfs_update_inode is sometimes called with a null reservation.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-12-15 13:36:29 -05:00
Josef Bacik e65cbb94e0 Btrfs: only set cache_generation if we setup the block group
A user reported a problem booting into a new kernel with the old format inodes.
He was panicing in cow_file_range while writing out the inode cache.  This is
because if the block group is not cached we'll just skip writing out the cache,
however if it gets dirtied again in the same transaction and it finished caching
we'd go ahead and write it out, but since we set cache_generation to the transid
we think we've already truncated it and will just carry on, running into
cow_file_range and blowing up.  We need to make sure we only set
cache_generation if we've done the truncate.  The user tested this patch and
verified that the panic no longer occured.  Thanks,

Reported-and-Tested-by: Klaus Bitto <klaus.bitto@gmail.com>
Signed-off-by: Josef Bacik <josef@redhat.com>
2011-12-15 11:04:24 -05:00
Josef Bacik ee4d89f0c4 Btrfs: don't panic if orphan item already exists
I've been hitting this BUG_ON() in btrfs_orphan_add when running xfstest 269 in
a loop.  This is because we will add an orphan item, do the truncate, the
truncate will fail for whatever reason (*cough*ENOSPC*cough*) and then we're
left with an orphan item still in the fs.  Then we come back later to do another
truncate and it blows up because we already have an orphan item.  This is ok so
just fix the BUG_ON() to only BUG() if ret is not EEXIST.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
2011-12-15 11:04:24 -05:00
Josef Bacik 7041ee9728 Btrfs: fix leaked space in truncate
We were occasionaly leaking space when running xfstest 269.  This is because if
we failed to start the transaction in the truncate loop we'd just goto out, but
we need to break so that the inode is removed from the orphan list and the space
is properly freed.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
2011-12-15 11:04:23 -05:00
Josef Bacik 660d3f6cde Btrfs: fix how we do delalloc reservations and how we free reservations on error
Running xfstests 269 with some tracing my scripts kept spitting out errors about
releasing bytes that we didn't actually have reserved.  This took me down a huge
rabbit hole and it turns out the way we deal with reserved_extents is wrong,
we need to only be setting it if the reservation succeeds, otherwise the free()
method will come in and unreserve space that isn't actually reserved yet, which
can lead to other warnings and such.  The math was all working out right in the
end, but it caused all sorts of other issues in addition to making my scripts
yell and scream and generally make it impossible for me to track down the
original issue I was looking for.  The other problem is with our error handling
in the reservation code.  There are two cases that we need to deal with

1) We raced with free.  In this case free won't free anything because csum_bytes
is modified before we dro the lock in our reservation path, so free rightly
doesn't release any space because the reservation code may be depending on that
reservation.  However if we fail, we need the reservation side to do the free at
that point since that space is no longer in use.  So as it stands the code was
doing this fine and it worked out, except in case #2

2) We don't race with free.  Nobody comes in and changes anything, and our
reservation fails.  In this case we didn't reserve anything anyway and we just
need to clean up csum_bytes but not free anything.  So we keep track of
csum_bytes before we drop the lock and if it hasn't changed we know we can just
decrement csum_bytes and carry on.

Because of the case where we can race with free()'s since we have to drop our
spin_lock to do the reservation, I'm going to serialize all reservations with
the i_mutex.  We already get this for free in the heavy use paths, truncate and
file write all hold the i_mutex, just needed to add it to page_mkwrite and
various ioctl/balance things.  With this patch my space leak scripts no longer
scream bloody murder.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
2011-12-15 11:04:22 -05:00
Josef Bacik 22c44fe65a Btrfs: deal with enospc from dirtying inodes properly
Now that we're properly keeping track of delayed inode space we've been getting
a lot of warnings out of btrfs_dirty_inode() when running xfstest 83.  This is
because a bunch of people call mark_inode_dirty, which is void so we can't
return ENOSPC.  This needs to be fixed in a few areas

1) file_update_time - this updates the mtime and such when writing to a file,
which will call mark_inode_dirty.  So copy file_update_time into btrfs so we can
call btrfs_dirty_inode directly and return an error if we get one appropriately.

2) fix symlinks to use btrfs_setattr for ->setattr.  For some reason we weren't
setting ->setattr for symlinks, even though we should have been.  This catches
one of the cases where we were getting errors in mark_inode_dirty.

3) Fix btrfs_setattr and btrfs_setsize to call btrfs_dirty_inode directly
instead of mark_inode_dirty.  This lets us return errors properly for truncate
and chown/anything related to setattr.

4) Add a new btrfs_fs_dirty_inode which will just call btrfs_dirty_inode and
print an error if we have one.  The only remaining user we can't control for
this is touch_atime(), but we don't really want to keep people from walking
down the tree if we don't have space to save the atime update, so just complain
but don't worry about it.

With this patch xfstests 83 complains a handful of times instead of hundreds of
times.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
2011-12-15 11:04:21 -05:00
Josef Bacik 0dc3b84a73 Btrfs: fix num_workers_starting bug and other bugs in async thread
Al pointed out we have some random problems with the way we account for
num_workers_starting in the async thread stuff.  First of all we need to make
sure to decrement num_workers_starting if we fail to start the worker, so make
__btrfs_start_workers do this.  Also fix __btrfs_start_workers so that it
doesn't call btrfs_stop_workers(), there is no point in stopping everybody if we
failed to create a worker.  Also check_pending_worker_creates needs to call
__btrfs_start_work in it's work function since it already increments
num_workers_starting.

People only start one worker at a time, so get rid of the num_workers argument
everywhere, and make btrfs_queue_worker a void since it will always succeed.
Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
2011-12-15 11:04:21 -05:00
Casey Schaufler ad19db71f4 BTRFS: Establish i_ops before calling d_instantiate
The Smack LSM hook for security_d_instantiate checks
the inode's i_op->getxattr value to determine if the
containing filesystem supports extended attributes.
The BTRFS filesystem sets the inode's i_op value only
after it has instantiated the inode. This results in
Smack incorrectly giving new BTRFS inodes attributes
from the filesystem defaults on the assumption that
values can't be stored on the filesystem. This patch
moves the assignment of inode operation vectors ahead
of the calls to d_instantiate, letting Smack know that
the filesystem supports extended attributes. There
should be no impact on the performance or behavior of
BTRFS.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-12-15 10:50:38 -05:00
Chris Mason 8f3b65a3d6 Btrfs: add a cond_resched() into the worker loop
If we have a constant stream of end_io completions or crc work,
we can hit softlockup messages from the async helper threads.  This
adds a cond_resched() into the loop to avoid them.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-12-15 10:50:38 -05:00
Li Zefan 306424cc88 Btrfs: fix ctime update of on-disk inode
To reproduce the bug:

    # touch /mnt/tmp
    # stat /mnt/tmp | grep Change
    Change: 2011-12-09 09:32:23.412105981 +0800
    # chattr +i /mnt/tmp
    # stat /mnt/tmp | grep Change
    Change: 2011-12-09 09:32:43.198105295 +0800
    # umount /mnt
    # mount /dev/loop1 /mnt
    # stat /mnt/tmp | grep Change
    Change: 2011-12-09 09:32:23.412105981 +0800

We should update ctime of in-memory inode before calling
btrfs_update_inode().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-12-15 10:50:37 -05:00
Arne Jansen f8e9e0b07b btrfs: keep orphans for subvolume deletion
Since we have the free space caches, btrfs_orphan_cleanup also runs for
the tree_root. Unfortunately this also cleans up the orphans used to mark
subvol deletions in progress.

Currently if a subvol deletion gets interrupted twice by umount/mount, the
deletion will not be continued and the space permanently lost, though it
would be possible to write a tool to recover those lost subvol deletions.
This patch checks if the orphan belongs to a subvol (dead root) and skips
the deletion.

Signed-off-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-12-15 10:50:37 -05:00
Miao Xie 39fb26c398 Btrfs: fix inaccurate available space on raid0 profile
When we use raid0 as the data profile, df command may show us a very
inaccurate value of the available space, which may be much less than the
real one. It may make the users puzzled. Fix it by changing the calculation
of the available space, and making it be more similar to a fake chunk
allocation.

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-12-15 10:50:36 -05:00
Miao Xie 3642320e07 Btrfs: fix wrong disk space information of the files
Btrfsck report errors after the 83th case of xfstests was run, The error
number is 400, it means the used disk space of the file is wrong.

The reason of this bug is that:
The file truncation may fail when the space of the file system is not enough,
and leave some file extents, whose offset are beyond the end of the files.
When we want to expand those files, we will drop those file extents, and
put in dummy file extents, and then we should update the i-node. But btrfs
forgets to do it.

This patch adds the forgotten i-node update.

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-12-15 10:50:36 -05:00