Commit graph

138 commits

Author SHA1 Message Date
Yinghai Lu
d49c428840 x86: make generic arch support NUMAQ
... so it could fall back to normal numa and we'd reduce the impact of the
NUMAQ subarch.

NUMAQ depends on GENERICARCH
also decouple genericarch numa from acpi.
also make it fall back to bigsmp if apicid > 8.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-10 11:34:42 +02:00
Kristian Høgsberg
3b6b9293d0 x86: Honor 'quiet' command line option in real mode boot decompressor.
This patch lets the early real mode code look for the 'quiet' option
on the kernel command line and pass a loadflag to the decompressor.
When this flag is set, we suppress the "Decompressing Linux... Parsing
ELF... done." messages.

Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-05-30 17:00:47 -07:00
Kristian Høgsberg
23968f71b2 x86: Use structs instead of hardcoded offsets in x86 boot decompressor.
Replace hardcoded offsets embedded in macros in
arch/x86/boot/compressed with proper structure references.

Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-05-30 17:00:34 -07:00
Dave Jones
c7d624d1ee x86: Fix up silly i1586 boot message.
Trying to boot a 64-bit kernel on a 32bit Pentium 4 gets
you an amusing message along the lines of.
"you need an x86-64, but you only have an i1586"
due to the P4 being family F.  Munge it to be 686.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-05-28 10:34:12 -07:00
Paul Jackson
c3965bd151 x86 boot: proper use of ARRAY_SIZE instead of repeated E820MAX constant
This patch is motivated by a subsequent patch which will allow for more
memory map entries on EFI supported systems than can be passed via the x86
legacy BIOS E820 interface.  The legacy interface is limited to E820MAX ==
128 memory entries, and that "E820MAX" manifest constant was used as the
size for several arrays and loops over those arrays.

The primary change in this patch is to change code loop sizes over those
arrays from using the constant E820MAX, to using the ARRAY_SIZE() macro
evaluated for the array being looped.  That way, a subsequent patch can
change the size of some of these arrays, without breaking this code.

This patch also adds a parameter to the sanitize_e820_map() routine,
which had an implicit size for the array passed it of E820MAX entries.
This new parameter explicitly passes the size of said array.  Once again,
this will allow a subsequent patch to change that array size for some
calls to sanitize_e820_map() without breaking the code.

As part of enhancing the sanitize_e820_map() interface this way, I further
combined the unnecessarily distinct x86_32 and x86_64 declarations for
this routine into a single, commonly used, declaration.

This patch in itself should make no difference to the resulting kernel
binary.

[ mingo@elte.hu: merged to -tip ]

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-25 10:55:11 +02:00
Miklos Vajna
2141261a11 x86: janitor work in video-vga.c
Just moved an open brace to the previous line.

Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-25 08:58:35 +02:00
Cyrill Gorcunov
e83e31f41a x86: compressed/head_64.S cleanup - use predefined flags from processor-flags.h
We should better use already defined flags from processor-flags.h instead
of defining own ones

[>>> object code check >>>]

original
md5sum: 129f24be6df396fb7d8bf998c01fc716  arch/x86/boot/compressed/head_64.o
   text    data     bss     dec     hex filename
    705      48   45056   45809    b2f1 arch/x86/boot/compressed/head_64.o

patched
md5sum: 129f24be6df396fb7d8bf998c01fc716  arch/x86/boot/compressed/head_64-new.o
   text    data     bss     dec     hex filename
    705      48   45056   45809    b2f1 arch/x86/boot/compressed/head_64-new.o

[<<< object code check <<<]

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-25 08:58:32 +02:00
Thomas Gleixner
535694f361 x86: boot/printfc use NULL instead 0
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-25 08:58:25 +02:00
Harvey Harrison
7fafd91d85 x86: fix integer as NULL pointer warning
arch/x86/boot/printf.c:59:10: warning: Using plain integer as NULL pointer

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-23 08:11:06 -07:00
Cyrill Gorcunov
8bd1796ded x86: relocs ELF handling - use SELFMAG instead of numeric constant
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: akpm@linux-foundation.org
Cc: hpa@zytor.com
Cc: mingo@elte.hu
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-04 20:04:45 +02:00
Tim Gardner
8c4dd60682 edd: add default mode CONFIG_EDD_OFF=n, override with edd={on,off}
Add a kernel parameter option to 'edd' to enable/disable BIOS Enhanced Disk
Drive Services.  CONFIG_EDD_OFF disables EDD while still compiling EDD into
the kernel.  Default behavior can be forced using 'edd=on' or 'edd=off' as
a kernel parameter.

[akpm@linux-foundation.org: fix kernel-parameters.txt]
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:23 -07:00
Huang, Ying
8b664aa66e x86, boot: add linked list of struct setup_data
This patch adds a field of 64-bit physical pointer to NULL terminated
single linked list of struct setup_data to real-mode kernel
header. This is used as a more extensible boot parameters passing
mechanism.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-26 21:34:42 +02:00
Matthew Wilcox
2cfed60cc2 Update .gitignore files
Add some autogenerated files to various .gitignore files

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-25 12:27:32 -07:00
Yinghai Lu
4a9f54cfd2 x86: cleanup: change _end to end_before_pgt
cleanup: change the _end in compressed vmlinux_64.lds.

also change _heap to _ebss that is not needed.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19 19:19:55 +02:00
Alexander van Heukelum
7c53976404 x86: cleanup boot-heap usage
The kernel decompressor wrapper uses memory located beyond the
end of the image. This might lead to hard to debug problems,
but even if it can be proven to be safe, it is at the very
least unclean. I don't see any advantages either, unless you
count it not being zeroed out as an advantage. This patch
moves the boot-heap area to the bss segment.

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19 19:19:54 +02:00
WANG Cong
cf9b111c17 x86: remove pointless comments
Remove old comments that include the old arch/i386 directory.

Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19 19:19:54 +02:00
Pavel Machek
e44b7b7525 x86: move suspend wakeup code to C
Move wakeup code to .c, so that video mode setting code can be shared
between boot and wakeup. Remove nasty assembly code in 64-bit case by
re-using trampoline code. Stack setup was fixed to clear high 16bits
of %esp, maybe that fixes some machines.

.c code sharing and morse code was done H. Peter Anvin, Sam Ravnborg
reviewed kbuild related stuff, and it seems okay to him. Rafael did
some cleanups.

[rjw:
* Made the patch stop breaking compilation on x86-32
* Added arch/x86/kernel/acpi/sleep.h
* Got rid of compiler warnings in arch/x86/kernel/acpi/sleep.c
* Fixed 32-bit compilation on x86-64 systems
* Added include/asm-x86/trampoline.h and fixed the non-SMP
  compilation on 64-bit x86
* Removed arch/x86/kernel/acpi/sleep_32.c which was not used
* Fixed some breakage caused by the integration of smpboot.c done
  under us in the meantime]

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 17:41:37 +02:00
Alexander van Heukelum
03056c88cf x86: remove superfluous initialisation in boot code.
In arch/x86/boot/compressed/misc.c, the variable vidmem is
the only variable that ends up in de data segment. It's also
superfluous, because the first thing the code does is:

	if (RM_SCREEN_INFO.orig_video_mode == 7) {
		vidmem = (char *) 0xb0000;
		vidport = 0x3b4;
	} else {
		vidmem = (char *) 0xb8000;
		vidport = 0x3d4;
	}

This patch removes the initialisation.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 17:41:36 +02:00
Paolo Ciarrocchi
7030760ae5 x86: coding style fixes to arch/x86/boot/cpucheck.c
Before:
   total: 30 errors, 0 warnings, 262 lines checked
After:
   total: 0 errors, 0 warnings, 262 lines checked

No code changed:

arch/x86/boot/cpucheck.o:

   text	   data	    bss	    dec	    hex	filename
    989	      0	     96	   1085	    43d	cpucheck.o.before
    989	      0	     96	   1085	    43d	cpucheck.o.after

md5:
   06634cfefb8438fa284ff903b4cafbce  cpucheck.o.before.asm
   06634cfefb8438fa284ff903b4cafbce  cpucheck.o.after.asm

Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 17:40:50 +02:00
Paolo Ciarrocchi
023196a3be x86: coding style fix to arch/x86/boot/pm.c
Before:
   total: 1 errors, 0 warnings, 178 lines checked
After:
   total: 0 errors, 0 warnings, 178 lines checked

No code changed:

arch/x86/boot/pm.o:

   text	   data	    bss	    dec	    hex	filename
    351	      0	      6	    357	    165	pm.o.before
    351	      0	      6	    357	    165	pm.o.after

md5:
   81de3616bceb29691bf835bb62a84ff1  pm.o.before.asm
   81de3616bceb29691bf835bb62a84ff1  pm.o.after.asm

Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 17:40:49 +02:00
Ingo Molnar
1180e01de5 x86: more cleanups in arch/x86/boot/compressed/misc.c
Before:
   total: 7 errors, 8 warnings, 471 lines checked
After:
   total: 5 errors, 5 warnings, 479 lines checked

( the rest cannot be eliminated due to zlib interface cruftiness. )

No code changed:

arch/x86/boot/compressed/misc.o:

   text	   data	    bss	    dec	    hex	filename
  10716	      8	   2152	  12876	   324c	misc.o.before
  10716	      8	   2152	  12876	   324c	misc.o.after

md5:
   2c20c903986a3c9bca44306c6646067e  misc.o.before.asm
   2c20c903986a3c9bca44306c6646067e  misc.o.after.asm

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 17:40:49 +02:00
Paolo Ciarrocchi
fd77c7cabd x86: coding style fixes to arch/x86/boot/compressed/misc.c
Fix lots of style errors and warnings.

Before:
   total: 58 errors, 9 warnings, 469 lines checked
After:
   total: 7 errors, 8 warnings, 471 lines checked

No code changed:

arch/x86/boot/compressed/misc.o:

   text	   data	    bss	    dec	    hex	filename
  10716	      8	   2152	  12876	   324c	misc.o.before
  10716	      8	   2152	  12876	   324c	misc.o.after

md5:
   2c20c903986a3c9bca44306c6646067e  misc.o.before.asm
   2c20c903986a3c9bca44306c6646067e  misc.o.after.asm

Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 17:40:49 +02:00
Ian Campbell
87253d1b4f x86: boot protocol updates
Also update field names to simply payload_{offset,length} so as to not rule
out uncompressed images.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 17:40:48 +02:00
Ingo Molnar
52b387197b x86: bump image header to version 2.08.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-17 17:40:46 +02:00
Ian Campbell
7d6e737c8d x86: add a crc32 checksum to the kernel image.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-17 17:40:46 +02:00
Ian Campbell
099e137726 x86: use ELF format in compressed images.
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: Ian Campbell <ijc@hellion.org.uk>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: virtualization@lists.linux-foundation.org
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-17 17:40:46 +02:00
Peter Korsgaard
1722770f13 x86-boot: don't request VBE2 information
The new x86 setup code (4fd06960f1) broke booting on an old P3/500MHz
with an onboard Voodoo3 of mine. After debugging it, it turned out
to be caused by the fact that the vesa probing now asks for VBE2 data.

Disassembing the video BIOS shows that it overflows the vesa_general_info
structure when VBE2 data is requested because the source addresses for the
information strings which get strcpy'ed to the buffer lie outside the 32K
BIOS code (and hence contain long sequences of 0xff's).

E.G.:

get_vbe_controller_info:
00002A9C  60                pushaw
00002A9D  1E                push ds
00002A9E  0E                push cs
00002A9F  1F                pop ds
00002AA0  2BC9              sub cx,cx
00002AA2  6626813D56424532  cmp dword [es:di],0x32454256 ; "VBE2"
00002AAA  7501              jnz .1
00002AAC  41                inc cx
.1:
00002AAD  51                push cx
00002AAE  B91400            mov cx,0x14
00002AB1  BED47F            mov si, controller_header
00002AB4  57                push di
00002AB5  F3A4              rep movsb ; copy vbe1.2 header

00002AB7  B9EC00            mov cx,0xec
00002ABA  2AC0              sub al,al
00002ABC  F3AA              rep stosb ; zero pad remainder

00002ABE  5F                pop di
00002ABF  E8EB0D            call word get_memory
00002AC2  C1E002            shl ax,0x2
00002AC5  26894512          mov [es:di+0x12],ax ; total memory
00002AC9  26C745040003      mov word [es:di+0x4],0x300 ; VBE version
00002ACF  268C4D08          mov [es:di+0x8],cs
00002AD3  268C4D10          mov [es:di+0x10],cs
00002AD7  59                pop cx
00002AD8  E361              jcxz .done ; VBE2 requested?
00002ADA  8D9D0001          lea bx,[di+0x100]
00002ADE  53                push bx
00002ADF  87DF              xchg bx,di ; di now points to 2nd half
00002AE1  26C747140001      mov word [es:bx+0x14],0x100 ; sw rev

00002AE7  26897F06          mov [es:bx+0x6],di		; oem string
00002AEB  268C4708          mov [es:bx+0x8],es
00002AEF  BE5280            mov si,0x8052 ; oem string
00002AF2  E87A1B            call word strcpy

00002AF5  26897F0E          mov [es:bx+0xe],di ; video mode list
00002AF9  268C4710          mov [es:bx+0x10],es
00002AFD  B91E00            mov cx,0x1e
00002B00  BEE87F            mov si,vidmodes
00002B03  F3A5              rep movsw

00002B05  26897F16          mov [es:bx+0x16],di ; oem vendor
00002B09  268C4718          mov [es:bx+0x18],es
00002B0D  BE2480            mov si,0x8024 ; oem vendor
00002B10  E85C1B            call word strcpy

00002B13  26897F1A          mov [es:bx+0x1a],di ; oem product
00002B17  268C471C          mov [es:bx+0x1c],es
00002B1B  BE3880            mov si,0x8038 ; oem product
00002B1E  E84E1B            call word strcpy

00002B21  26897F1E          mov [es:bx+0x1e],di ; oem product rev
00002B25  268C4720          mov [es:bx+0x20],es
00002B29  BE4580            mov si,0x8045 ; oem product rev
00002B2C  E8401B            call word strcpy

00002B2F  58                pop ax
00002B30  B90001            mov cx,0x100
00002B33  2BCF              sub cx,di
00002B35  03C8              add cx,ax
00002B37  2AC0              sub al,al
00002B39  F3AA              rep stosb ; zero pad
.done:
00002B3B  1F                pop ds
00002B3C  61                popaw
00002B3D  B84F00            mov ax,0x4f
00002B40  C3                ret

(The full BIOS can be found at http://peter.korsgaard.com/vgabios.bin
if interested).

The old setup code didn't ask for VBE2 info, and the new code doesn't
actually do anything with the extra information, so the fix is to simply
not request it. Other BIOS'es might have the same problem.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 16:39:14 +01:00
H. Peter Anvin
829157be59 x86: handle BIOSes which terminate e820 with CF=1 and no SMAP
The proper way to terminate the e820 chain is with %ebx == 0 on the
last legitimate memory block.  However, several BIOSes don't do that
and instead return error (CF = 1) when trying to read off the end of
the list.  For this error return, %eax doesn't necessarily return the
SMAP signature -- correctly so, since %ah should contain an error code
in this case.

To deal with some particularly broken BIOSes, we clear the entire e820
chain if the SMAP signature is missing in the middle, indicating a
plain insane e820 implementation.  However, we need to make the test
for CF = 1 before the SMAP check.

This fixes at least one HP laptop (nc6400) for which none of the
memory-probing methods (e820, e801, 88) functioned fully according to
spec.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-26 12:55:52 +01:00
Linus Torvalds
0b6ca82af8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: (32 commits)
  x86: cpa, strict range check in try_preserve_large_page()
  x86: cpa, enable CONFIG_DEBUG_PAGEALLOC on 64-bit
  x86: cpa, use page pool
  x86: introduce page pool in cpa
  x86: DEBUG_PAGEALLOC: enable after mem_init()
  brk: help text typo fix
  lguest: accept guest _PAGE_PWT page table entries
  x86 PM: update stale comments
  x86 PM: consolidate suspend and hibernation code
  x86 PM: rename 32-bit files in arch/x86/power
  x86 PM: move 64-bit hibernation files to arch/x86/power
  x86: trivial printk optimizations
  x86: fix early_ioremap pagetable ops
  x86: construct 32-bit boot time page tables in native format.
  x86, core: remove CONFIG_FORCED_INLINING
  x86: avoid unused variable warning in mm/init_64.c
  x86: fixup more paravirt fallout
  brk: document randomize_va_space and CONFIG_COMPAT_BRK (was Re:
  x86: fix sparse warnings in acpi/bus.c
  x86: fix sparse warning in topology.c
  ...
2008-02-09 23:29:57 -08:00
S.Çağlar Onur
3b35632973 Update arch/x86/boot/.gitignore with new auto-generated files
Signed-off-by: S.Çağlar Onur <caglar@pardus.org.tr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-09 23:27:01 -08:00
Denys Vlasenko
9b706aee7d x86: trivial printk optimizations
In arch/x86/boot/printf.c gets rid of unused tail of digits: const char
*digits = "0123456789abcdefghijklmnopqrstuvwxyz"; (we are using 0-9a-f
only)

Uses smaller/faster lowercasing (by ORing with 0x20)
if we know that we work on numbers/digits. Makes
strtoul smaller, and also we are getting rid of

  static const char small_digits[] = "0123456789abcdefx";
  static const char large_digits[] = "0123456789ABCDEFX";

since this works equally well:

  static const char digits[16] = "0123456789ABCDEF";

Size savings:

$ size vmlinux.org vmlinux
   text    data     bss     dec     hex filename
 877320  112252   90112 1079684  107984 vmlinux.org
 877048  112252   90112 1079412  107874 vmlinux

It may be also a tiny bit faster because code has less
branches now, but I doubt it is measurable.

[ hugh@veritas.com: uppercase pointers fix ]

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-09 23:24:09 +01:00
Andi Kleen
31422c51e0 x86: rename LARGE_PAGE_SIZE to PMD_PAGE_SIZE
Fix up all users.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-04 16:48:08 +01:00
H. Peter Anvin
f0be6c6a69 x86 setup: print missing CPU features in cleartext
Instead of obscure numbers, print the list of missing CPU features in
cleartext.  To conserve space, use a host program (mkcpustr.c) to
produce a compact list of mandatory features only.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-04 16:48:00 +01:00
Ian Campbell
1622ac23bd x86: define OBJCOPYFLAGS explicitly for each target.
Do this rather than defining a global version and overriding it in
almost all cases in order to make subsequent patches simpler.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-04 16:47:56 +01:00
Yinghai Lu
32ed937d05 x86: fix comments in vmlinux_64.lds
for bzImage, the vmlinux_64.lds still have s32 bit code, and startup_32
should be 0. fix the comment.

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-01 17:49:41 +01:00
Ian Campbell
778cb929ad x86: unify arch/x86/boot/compressed/misc_??.c
Remainder of unification can occur inplace.

size reports no change in arch/x86/boot/compressed/vmlinux.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:38 +01:00
Ian Campbell
4c83d6536e x86: unify variable names in arch/x86/boot/compressed/misc_??.c
size reports no change in arch/x86/boot/compressed/vmlinux.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:38 +01:00
Ian Campbell
8751f97486 x86: unify headers in arch/x86/boot/compressed/misc_??.c
size reports no change in arch/x86/boot/compressed/vmlinux.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:38 +01:00
Ian Campbell
818a08f8a5 x86: unify whitespace and comments in arch/x86/boot/compressed/misc_??.c
size reports no change in arch/x86/boot/compressed/vmlinux.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:38 +01:00
Ian Campbell
6b3c0426a7 x86: unify strings in arch/x86/boot/compressed/misc_??.c
There seems to be a preference for the 64 bit version so use that on 32 bit and
drop the stray leading "."

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:38 +01:00
Ian Campbell
f18c0e7920 x86: unify arch/x86/boot/compressed/vmlinux_??.scr
The files are now identical so merge them.

size reports no change in arch/x86/boot/compressed/vmlinux.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:38 +01:00
Ian Campbell
20514e9f6e x86: switch to .rodata.compressed in arch/x86/boot/compressed/vmlinux_??.scr
vmlinux_64 and vmlinux_32.scr are now identical

size shows an expected movement from .text to .rodata and 4 extra bytes
of padding.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:38 +01:00
Ian Campbell
004426eb29 x86: unify whitespace in arch/x86/boot/compressed/vmlinux_??.scr
size reports no change in arch/x86/boot/compressed/vmlinux.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:37 +01:00
Ian Campbell
afe0bc63ae x86: unify whitespace and comments in arch/x86/boot/compressed/vmlinux_??.lds
size reports no change in arch/x86/boot/compressed/vmlinux.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:37 +01:00
Jan Engelhardt
ade1af7712 x86: remove unneded casts
x86: remove unneeded casts

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:23 +01:00
H. Peter Anvin
387faedb1d x86 setup: correct the base in the GDT_ENTRY() macro
The GDT_ENTRY() macro in pm.c would incorrectly cut the bottom 8 bits
off the base.  We didn't define any bases with the bottom 8 bits
nonzero, so it is a non-manifest bug, but it's still a bug.

Pointed out by John Smith <johnsmith9344@gmail.com>.
Cc: John Smith <johnsmith9344@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:04 +01:00
H. Peter Anvin
acd644bb4a x86 setup: guard the heap against invalid stack setups
If we use the bootloader-provided stack pointer, we might end up in a
situation where the bootloader (incorrectly) pointed the stack in the
middle of our heap.  Catch this by simply comparing the computed heap
end value to the stack pointer minus the defined stack size.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:04 +01:00
H. Peter Anvin
1a8514e04e x86 setup: push video mode setup as late as possible
Push video mode setup as late as possible; messages issued through the
BIOS interface after video mode setup will either not be seen (for
framebuffer modes) or will screw up the cursor (for text modes.)

In particular, this makes the EDD probing message show up correctly.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:03 +01:00
H. Peter Anvin
b710763608 x86 setup: add note to use edd=off on EDD probing hangs
Tell the user to specify edd=off in the case of EDD probing hangs.
Per LKML discussion.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:03 +01:00
H. Peter Anvin
70d8abf5df x86 setup: add missing prototype; formatting fix
Add prototype for cmdline_find_option_bool() missing from:

    x86 setup: early cmdline parser handle boolean options

Also, fix up a minor formatting error in that patch.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:03 +01:00
H. Peter Anvin
f7775016c6 x86 setup: OK -> ok (no need to scream)
Unnecessary capitals are shouting; no need for it here.
Thus, change "OK" to "ok" and add a space.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:03 +01:00
devzero@web.de
e479c8306f x86 setup: be more verbose when probing EDD
On early boot, probing the Bios for EDD happens without any message.

Enhanced Disk Drive Services (EDD) is a mechanism to match x86 BIOS device
names (int13 device 80h) to Linux device names (e.g. /dev/sda, /dev/hda)

There are buggy Bios out there having problems with EDD. This can be problems
with the Bios itself or with addon cards, too.

This patch is adds an informational message on early boot.

CONFIG_EDD is not set with defconfig, but with allmodconfig (i.e. CONFIG_EDD=m)
so the EDD probe may be active on early boot on many systems nowadays.

I can tell, that the probe is active on SuSE distro and with that I have seen
more than one system hanging endlessly with those "black screen with a blinking
cursor in the the upper left" on installation, making it difficult for the end-
user to find out, what`s the issue.
For sure I have seen this on FujitsuSiemens PCs with i810 and with i815 chipset.

This one also honours the "quiet" bootparam.

Also see:
http://marc.info/?l=linux-kernel&m=119781937207969&w=2
http://marc.info/?l=linux-kernel&m=119783934032326&w=2
http://marc.info/?l=linux-kernel&m=119783678529100&w=2

Signed-off-by: Roland Kletzing <devzero@web.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:03 +01:00
devzero@web.de
32d0b98980 x86 setup: early cmdline parser handle boolean options
This patch extends the early commandline parser to support boolean options.
The current version in mainline only supports parsing "option=arg" value pairs.

With this it should be easy making other messages like "Uncompressing kernel"
honour the "quiet" parameter, too.

Signed-off-by: Roland Kletzing <devzero@web.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:02 +01:00
H. Peter Anvin
811a0fff5d x86 setup: fix constraints in segment accessor functions
Fix the operand constraints for the segment accessor functions,
{rd,wr}{fs,gs}*.  In particular, the 8-bit functions used "r"
constraints instead of "q" constraints.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:02 +01:00
H. Peter Anvin
1cac5004e9 x86 setup: display VESA graphics modes in vga=ask menu
Display VESA graphics modes, with their mode IDs, in the vga=ask
menu.  Most VESA mode numbers are platform-dependent, so it helps to
have an easy way to display them.

Based in part on a patch by Petr Vandrovec <petr@vandrovec.name>.

Cc: Petr Vandrovec <petr@vandrovec.name>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:02 +01:00
H. Peter Anvin
02a7b425e8 x86 setup: use X86_CR0_PE macro instead of hard-coded constant
To set CR0.PE, use the X86_CR0_PE macro defined in
<asm/processor-flags.h> instead of hardcoding it as a constant (1).

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:02 +01:00
H. Peter Anvin
88089519f3 x86 setup: initialize LDTR and TR to make life easier to Intel VT
Intel VT doesn't like to engage when the protected-mode state isn't
fully initialized.  Make life easier for it by initializing LDTR (to
null) and TR (to a dummy hunk of low memory which will never actually
be touched.)

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:02 +01:00
H. Peter Anvin
c4d9ba6da9 x86 setup: make PM transition more paranoid; cleanup 32-bit entry
Make the transition to protected mode more paranoid by having
back-to-back near jump (to synchronize the 386/486 prefetch queue) and
far jump (to set up the code segment.)

While we're at it, zero as many registers as practical (for future
expandability of the 32-bit entry interface) and enter 32-bit mode
with a valid stack.  Note that the 32-bit code cannot rely on this
stack, or we'll break all other existing users of the 32-bit
entrypoint, but it may make debugging hacks easier to write.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:01 +01:00
H. Peter Anvin
cf8fa920cb i386: handle an initrd in highmem (version 2)
The boot protocol has until now required that the initrd be located in
lowmem, which makes the lowmem/highmem boundary visible to the boot
loader.  This was exported to the bootloader via a compile-time
field.  Unfortunately, the vmalloc= command-line option breaks this
part of the protocol; instead of adding yet another hack that affects
the bootloader, have the kernel relocate the initrd down below the
lowmem boundary inside the kernel itself.

Note that this does not rely on HIGHMEM being enabled in the kernel.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:32:51 +01:00
Andi Kleen
a6b68076fd x86: compile apm and voyager module only when selected in Kconfig
Previously the complete files were #ifdef'ed, but now handle that in the
Makefile.

May save a minor bit of compilation time.

[ Stephen Rothwell <sfr@canb.auug.org.au>: build dependency fix ]
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:49 +01:00
Ingo Molnar
ff3cf85612 x86: hlt on early crash
H. Peter Anvin <hpa@zytor.com> wrote:

> It probably should actually HLT, to avoid sucking power, and stressing
> the thermal system.  We're dead at this point, and the early 486's
> which had problems with HLT will lock up - we don't care.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:31 +01:00
Sam Ravnborg
db569afa4e x86: unify arch/x86/boot/compressed/Makefile(s)
Trivial unification of the two Makefiles.
Tested doing a defconfig build for both 32 and 64 bit and
no build changes occured.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:30 +01:00
Sam Ravnborg
4ba7e5cd49 x86: biarch support for 32 bit builds beautified
There were no reason to mess around with CC, AS and LD.
Fixing this up avoided duplicated option for ld.

A small fixlet were needed in boot/Makefile which assumed
that CC were modified.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:23 +01:00
Glauber de Oliveira Costa
ba082427ae x86: tweak io_64.h for paravirt.
We need something here because we can't call in and out instructions
directly. However, we have to be careful, because no indirections are
allowed in misc_64.c , and paravirt_ops is a kind of one. So just
call it directly there

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:10 +01:00
Roland McGrath
4707c4717a x86 vDSO: absolute relocs
This updates the exceptions for absolute relocs for the new symbol name
convention used for symbols extracted from the vDSO images.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:30:42 +01:00
Rene Herman
b02aae9cf5 x86: provide a DMI based port 0x80 I/O delay override.
x86: provide a DMI based port 0x80 I/O delay override.

Certain (HP) laptops experience trouble from our port 0x80 I/O delay
writes. This patch provides for a DMI based switch to the "alternate
diagnostic port" 0xed (as used by some BIOSes as well) for these.

David P. Reed confirmed that port 0xed works for him and provides a
proper delay. The symptoms of _not_ working are a hanging machine,
with "hwclock" use being a direct trigger.

Earlier versions of this attempted to simply use udelay(2), with the
2 being a value tested to be a nicely conservative upper-bound with
help from many on the linux-kernel mailinglist but that approach has
two problems.

First, pre-loops_per_jiffy calibration (which is post PIT init while
some implementations of the PIT are actually one of the historically
problematic devices that need the delay) udelay() isn't particularly
well-defined. We could initialise loops_per_jiffy conservatively (and
based on CPU family so as to not unduly delay old machines) which
would sort of work, but...

Second, delaying isn't the only effect that a write to port 0x80 has.
It's also a PCI posting barrier which some devices may be explicitly
or implicitly relying on. Alan Cox did a survey and found evidence
that additionally some drivers may be racy on SMP without the bus
locking outb.

Switching to an inb() makes the timing too unpredictable and as such,
this DMI based switch should be the safest approach for now. Any more
invasive changes should get more rigid testing first. It's moreover
only very few machines with the problem and a DMI based hack seems
to fit that situation.

This also introduces a command-line parameter "io_delay" to override
the DMI based choice again:

	io_delay=<standard|alternate>

where "standard" means using the standard port 0x80 and "alternate"
port 0xed.

This retains the udelay method as a config (CONFIG_UDELAY_IO_DELAY) and
command-line ("io_delay=udelay") choice for testing purposes as well.

This does not change the io_delay() in the boot code which is using
the same port 0x80 I/O delay but those do not appear to be a problem
as David P. Reed reported the problem was already gone after using the
udelay version. He moreover reported that booting with "acpi=off" also
fixed things and seeing as how ACPI isn't touched until after this DMI
based I/O port switch I believe it's safe to leave the ones in the boot
code be.

The DMI strings from David's HP Pavilion dv9000z are in there already
and we need to get/verify the DMI info from other machines with the
problem, notably the HP Pavilion dv6000z.

This patch is partly based on earlier patches from Pavel Machek and
David P. Reed.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:30:05 +01:00
Jens Rottmann
16252da654 x86 setup: don't recalculate ss:esp unless really necessary
In order to work around old LILO versions providing an invalid ss
register, the current setup code always sets up a new stack,
immediately following .bss and the heap. But this breaks LOADLIN.

This rewrite of the workaround checks for an invalid stack (ss!=ds)
first, and leaves ss:sp alone otherwise (apart from aligning esp).

[hpa note: LOADLIN has a number of arbitrary hard-coded limits that
are being pushed up against.  Without some major revision of LOADLIN
itself it will not be sustainable keeping it alive.  This gives it
another brief lease on life, however.  This patch also helps the
cmdline truncation problem with old versions of SYSLINUX.]

Signed-off-by: Jens Rottmann <JRottmann at LiPPERT-AT. de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2007-11-28 18:17:17 -08:00
Sam Ravnborg
d746d647f3 x86: do not use $(ARCH) when not needed
For x86 ARCH may say i386 or x86_64 and soon x86.
Rely on CONFIG_X64_32 to select between 32/64 or just
hardcode the value as appropriate.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-12 21:02:20 +01:00
Sam Ravnborg
1032c0ba9d x86: arch/x86/Kconfig.cpu unification
Move all CPU definitions to Kconfig.cpu
Always define X86_MINIMUM_CPU_FAMILY and do the
obvious code cleanup in boot/cpucheck.c

Comments from: Adrian Bunk <bunk@kernel.org> incorporated.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Adrian Bunk <bunk@kernel.org>
Cc: Brian Gerst <bgerst@didntduck.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-12 21:02:19 +01:00
H. Peter Anvin
9f259cc59b x86 setup: set %ebx == %ebp == %edi == 0 on protected mode entry
In accordance with the newly formalized 32-bit boot protocol, set
%ebx == %ebp == %edi == 0 in order to support future extensions to the
protocol.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2007-11-04 19:48:04 -08:00
H. Peter Anvin
7ed192906a x86 setup: add a near jump to serialize %cr0 on 386/486
The 386 and 486 needs a jump immediately after setting %cr0 in order
to serialize the pipeline.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2007-11-04 19:47:46 -08:00
Eric W. Biederman
bd53147db8 x86: Fix boot protocol KEEP_SEGMENTS check.
The kernel only ever supports 1 version of the boot protocol
so there is no need to check the boot protocol revision to
see if a feature is supported.

Both x86 and x86_64 support the same boot protocol so we need
to implement the KEEP_SEGMENTS on x86_64 as well.  It isn't
just paravirt bootloaders that could use this functionality.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Zachary Amsden <zach@vmware.com>
Cc: Andi Kleen <ak@suse.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-27 20:57:43 +02:00
H. Peter Anvin
e6e1ace990 x86 setup: sizeof() is unsigned, unbreak comparisons
We use signed values for limit checking since the values can go
negative under certain circumstances.  However, sizeof() is unsigned
and forces the comparison to be unsigned, so move the comparison into
the heap_free() macros so we can ensure it is a signed comparison.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2007-10-25 20:20:06 -07:00
H. Peter Anvin
6b6815c6d5 x86 setup: handle boot loaders which set up the stack incorrectly
Apparently some specific versions of LILO enter the kernel with a
stack pointer that doesn't match the rest of the segments.  Make our
best attempt at untangling the resulting mess.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2007-10-25 19:55:03 -07:00
H. Peter Anvin
fa76dab935 x86: clean up setup.h and the boot code
Make <asm/setup.h> usable by the boot code.

Clean up vestiges of the old command-line protocol from setup.h and
head_32.S (it is still supported from the boot loader point of
view, since it is converted to the new command-line protocol by the
boot code.)

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-23 22:37:25 +02:00
Alejandro Martinez Ruiz
4d022adab4 x86: ARRAY_SIZE cleanup
Signed-off-by: Alejandro Martinez Ruiz <alex@flawedcode.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-23 22:37:22 +02:00
Rusty Russell
a24e785111 i386: paravirt boot sequence
This patch uses the updated boot protocol to do paravirtualized boot.
If the boot version is >= 2.07, then it will do two things:

 1. Check the bootparams loadflags to see if we should reload the
    segment registers and clear interrupts.  This is appropriate
    for normal native boot and some paravirtualized environments, but
    inapproprate for others.

 2. Check the hardware architecture, and dispatch to the appropriate
    kernel entrypoint.  If the bootloader doesn't set this, then we
    simply do the normal boot sequence.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Zachary Amsden <zach@vmware.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 08:13:17 -07:00
Simon Arlott
676b1855de spelling fixes: arch/x86_64/
Spelling fixes in arch/x86_64/.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-20 01:25:36 +02:00
Simon Arlott
27b46d7661 spelling fixes: arch/i386/
Spelling fixes in arch/i386/.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-20 01:13:56 +02:00
H. Peter Anvin
30c826451d [x86] remove uses of magic macros for boot_params access
Instead of using magic macros for boot_params access, simply use the
boot_params structure.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2007-10-16 17:38:31 -07:00
Sam Ravnborg
7eebb93486 x86: fix boot error introduced by kbuild
x86 uses target specific assignment of EXTRA_AFLAGS,
EXTRA_CFLAGS - this caused troubles with
introducing asflags-y, ccflags-y.

Fixed the target specific assignments in arch/x86/boot/Makefile
and auditted the rest of the kernel for similar usage.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-16 23:50:33 +02:00
Sam Ravnborg
222d394d30 kbuild: enable 'make AFLAGS=...' to add additional options to AS
The variable AFLAGS is a wellknown variable and the usage by
kbuild may result in unexpected behaviour.
On top of that several people over time has asked for a way to
pass in additional flags to gcc.

This patch replace use of AFLAGS with KBUILD_AFLAGS all over
the tree.

Patch was tested on following architectures:
alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k, s390

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-15 21:59:31 +02:00
Sam Ravnborg
a0f97e06a4 kbuild: enable 'make CFLAGS=...' to add additional options to CC
The variable CFLAGS is a wellknown variable and the usage by
kbuild may result in unexpected behaviour.
On top of that several people over time has asked for a way to
pass in additional flags to gcc.

This patch replace use of CFLAGS with KBUILD_CFLAGS all over the
tree and enabling one to use:
make CFLAGS=...
to specify additional gcc commandline options.

One usecase is when trying to find gcc bugs but other
use cases has been requested too.

Patch was tested on following architectures:
alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k

Test was simple to do a defconfig build, apply the patch and check
that nothing got rebuild.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-14 22:21:35 +02:00
Thomas Gleixner
250c22777f x86_64: move kernel
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 11:17:24 +02:00
Thomas Gleixner
9e9b4573e4 x86_64: move boot
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 11:17:15 +02:00
Thomas Gleixner
96ae6ea0be i386: move boot
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 11:16:45 +02:00
Thomas Gleixner
0530bf37ce i386: move boot
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 11:16:43 +02:00
Thomas Gleixner
19d8d79ccf i386: move boot
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 11:16:41 +02:00