Commit graph

21 commits

Author SHA1 Message Date
unsik Kim
3fbed4c61a mflash: initial support
This driver supports mflash IO mode for linux.

Mflash is embedded flash drive and mainly targeted mobile and consumer
electronic devices.

Internally, mflash has nand flash and other hardware logics and supports 2
different operation (ATA, IO) modes.  ATA mode doesn't need any new driver
and currently works well under standard IDE subsystem.  Actually it's one
chip SSD.  IO mode is ATA-like custom mode for the host that doesn't have
IDE interface.

Followings are brief descriptions about IO mode.
A. IO mode based on ATA protocol and uses some custom command. (read confirm,
write confirm)
B. IO mode uses SRAM bus interface.
C. IO mode supports 4kB boot area, so host can boot from mflash.

This driver is quitely similar to a standard ATA driver, but because of
following reasons it is currently seperated with ATA layer.

1. ATA layer deals standard ATA protocol.  ATA layer have many low-
   level device specific interface, but data transfer keeps ATA rule.
   But, mflash IO mode doesn't.

2. Even though currently not used in mflash driver code, mflash has
   some custom command and modes.  (nand fusing, firmware patch, etc) If
   this feature supported in linux kernel, ATA layer more altered.

3. Currently PATA platform device driver doesn't support interrupt.
   (I'm not sure) But, mflash uses interrupt (polling mode is just for
   debug).

4. mflash is somewhat under-develop product.  Even though some company
   already using mflash their own product, I think more time is needed for
   standardization of custom command and mode.  That time (maybe October)
   I will talk to with ATA people.  If they accept integration, I will
   integrate.

Signed-off-by: unsik Kim <donari75@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-07 08:12:38 +02:00
Laurent Vivier
8852ecd974 m68k: mac - Add SWIM floppy support
It allows to read data from a floppy, but not to write to, and to eject the
floppy (useful on our Mac without eject button).

Signed-off-by: Laurent Vivier <Laurent@lvivier.info>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-03-26 21:15:27 +01:00
Geert Uytterhoeven
f507cd2203 ps3/block: Replace mtd/ps3vram by block/ps3vram
Convert the PS3 Video RAM Storage Driver from an MTD driver to a plain block
device driver.

The ps3vram driver exposes unused video RAM on the PS3 as a block device
suitable for storage or swap.  Fast data transfer is achieved using a local
cache in system RAM and DMA transfers via the GPU.

The new driver is ca. 50% faster for reading, and ca. 10% for writing.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-13 16:07:19 +11:00
Adrian Bunk
453ea3ed0b move ide/legacy/hd.c to drivers/block/
This patch moves hd.c to drivers/block/

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: rmk@arm.linux.org.uk
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16 20:33:47 +02:00
Adrian Bunk
2af3e6017e The ps2esdi driver was marked as BROKEN more than two years ago due to being
no longer working for some time.

A driver that had been marked as BROKEN for such a long time seems to be
unlikely to be revived in the forseeable future.

But if anyone wants to ever revive this driver, the code is still present in
the older kernel releases.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Alan Cox <alan@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-03-17 09:03:05 +01:00
Nick Piggin
9db5579be4 rewrite rd
This is a rewrite of the ramdisk block device driver.

The old one is really difficult because it effectively implements a block
device which serves data out of its own buffer cache.  It relies on the dirty
bit being set, to pin its backing store in cache, however there are non
trivial paths which can clear the dirty bit (eg.  try_to_free_buffers()),
which had recently lead to data corruption.  And in general it is completely
wrong for a block device driver to do this.

The new one is more like a regular block device driver.  It has no idea about
vm/vfs stuff.  It's backing store is similar to the buffer cache (a simple
radix-tree of pages), but it doesn't know anything about page cache (the pages
in the radix tree are not pagecache pages).

There is one slight downside -- direct block device access and filesystem
metadata access goes through an extra copy and gets stored in RAM twice.
However, this downside is only slight, because the real buffercache of the
device is now reclaimable (because we're not playing crazy games with it), so
under memory intensive situations, footprint should effectively be the same --
maybe even a slight advantage to the new driver because it can also reclaim
buffer heads.

The fact that it now goes through all the regular vm/fs paths makes it
much more useful for testing, too.

   text    data     bss     dec     hex filename
   2837     849     384    4070     fe6 drivers/block/rd.o
   3528     371      12    3911     f47 drivers/block/brd.o

Text is larger, but data and bss are smaller, making total size smaller.

A few other nice things about it:
- Similar structure and layout to the new loop device handlinag.
- Dynamic ramdisk creation.
- Runtime flexible buffer head size (because it is no longer part of the
  ramdisk code).
- Boot / load time flexible ramdisk size, which could easily be extended
  to a per-ramdisk runtime changeable size (eg. with an ioctl).
- Can use highmem for the backing store.

[akpm@linux-foundation.org: fix build]
[byron.bbradley@gmail.com: make rd_size non-static]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Byron Bradley <byron.bbradley@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:30 -08:00
Rusty Russell
0ca49ca946 Remove old lguest bus and drivers.
This gets rid of the lguest bus, drivers and DMA mechanism, to make
way for a generic virtio mechanism.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:55 +10:00
Rusty Russell
e467cde238 Block driver using virtio.
The block driver uses scatter-gather lists with sg[0] being the
request information (struct virtio_blk_outhdr) with the type, sector
and inbuf id.  The next N sg entries are the bio itself, then the last
sg is the status byte.  Whether the N entries are in or out depends on
whether it's a read or a write.

We accept the normal (SCSI) ioctls: they get handed through to the other
side which can then handle it or reply that it's unsupported.  It's
not clear that this actually works in general, since I don't know
if blk_pc_request() requests have an accurate rq_data_dir().

Although we try to reply -ENOTTY on unsupported commands, ioctl(fd,
CDROMEJECT) returns success to userspace.  This needs a separate
patch.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <jens.axboe@oracle.com>
2007-10-23 15:49:54 +10:00
Rusty Russell
05ff09706b Make lguest compile with CONFIG_BLOCK=n and CONFIG_NET=n
Gabriel C reports lguest doesn't compile with CONFIG_BLOCK=n.  Fix this
by introducing a config var for the block device, which depends on
LGUEST && BLOCK.  Do the same for the net driver, rather then depending
gratuitously on CONFIG_NET.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Gabriel C <nix.or.die@googlemail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-29 17:37:45 -07:00
Geert Uytterhoeven
c6131fa528 ps3: Disk Storage Driver
Add a Disk Storage Driver for the PS3:
  - Implemented as a block device driver with a dynamic major
  - Disk names (and partitions) are of the format ps3d%c(%u)
  - Uses software scatter-gather with a 64 KiB bounce buffer as the hypervisor
    doesn't support scatter-gather

Cc: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-21 17:49:16 -07:00
Rusty Russell
b754416bfe lguest: the block driver
Lguest block driver

A simple block driver for lguest.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:53 -07:00
Jeremy Fitzhardinge
9f27ee5950 xen: add virtual block device driver.
The block device frontend driver allows the kernel to access block
devices exported exported by a virtual machine containing a physical
block device driver.

Signed-off-by: Ian Pratt <ian.pratt@xensource.com>
Signed-off-by: Christian Limpach <Christian.Limpach@cl.cam.ac.uk>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Greg KH <greg@kroah.com>
Cc: Jens Axboe <axboe@kernel.dk>
2007-07-18 08:47:45 -07:00
Grant Likely
74489a91dd Add support for Xilinx SystemACE CompactFlash interface
Tested on Xilinx Virtex ppc405, Katmai 440SPe, and Microblaze

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Stefan Roese <sr@denx.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: John William <jwilliams@itee.uq.edu.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:02 -07:00
Linus Torvalds
14dc524972 Merge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block:
  splice: direct splicing updates ppos twice
  more ACSI removal
  umem: Fix match of pci_ids in umem driver
  umem: Remove references to dead CONFIG_MM_MAP_MEMORY variable
  remove the documentation for the legacy CDROM drivers
2007-07-16 10:48:20 -07:00
Adrian Bunk
56a68a500f more ACSI removal
This patch removes some code that became dead code after the ATARI_ACSI
removal.

It also indirectly fixes the following bug introduced by
commit c2bcf3b897:

 config ATARI_SLM
        tristate "Atari SLM laser printer support"
-       depends on ATARI && ATARI_ACSI!=n
+       depends on ATARI

Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16 15:02:47 +02:00
David S. Miller
667ef3c396 [SPARC64]: Add Sun LDOM virtual disk driver.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:03:56 -07:00
Jens Axboe
c2bcf3b897 [PATCH] Remove acsi.c
Originally from Boaz Harrosh <bharrosh@panasas.com>

It hasn't been working in 2.5 or 2.6 ever, since it's still buffer_head
based.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10 08:03:33 +02:00
Adrian Bunk
b21a323710 [PATCH] remove the broken BLK_DEV_SWIM_IOP driver
The BLK_DEV_SWIM_IOP driver has:
- already been marked as BROKEN in 2.6.0 three years ago and
- is still marked as BROKEN.

Drivers that had been marked as BROKEN for such a long time seem to be
unlikely to be revived in the forseeable future.

But if anyone wants to ever revive this driver, the code is still
present in the older kernel releases.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Jens Axboe <jens.axboe@oracle.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 09:05:53 -08:00
Arthur Othieno
453ae9337a [PATCH] block: floppy98 removal, really.
floppy98 went out together with the rest of PC98 subarch.  Remove stale
Makefile entry that remained.

Signed-off-by: Arthur Othieno <apgo@patchbomb.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 07:33:26 -08:00
Jens Axboe
3a65dfe8c0 [BLOCK] Move all core block layer code to new block/ directory
drivers/block/ is right now a mix of core and driver parts. Lets move
the core parts to a new top level directory. Al will move the fs/
related block parts to block/ next.

Signed-off-by: Jens Axboe <axboe@suse.de>
2005-11-04 08:43:35 +01:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00