Commit graph

14793 commits

Author SHA1 Message Date
Linus Torvalds
7da6cd8bdf Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC32]: Revert f642b26380.
  [SPARC64]: Need to clobber global reg vars in switch_to().
2007-08-22 11:13:22 -07:00
Linus Torvalds
53ce2dc271 Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] Change atomic_read/set to inline functions with barrier semantics.
  [S390] kprobes: fix instruction length calculation
  [S390] hypfs: inode corruption due to missing locking
  [S390] disassembler: fix b2 opcodes like srst, bsg, and others
  [S390] vmur: fix reference counting for vmur device structure
  [S390] vmur: fix diag14 exceptions with addresses > 2GB.
  [S390] qdio: Refresh buffer states for IQDIO Asynchronous output queue
  [S390] qdio: fix EQBS handling on CCQ96
  [S390] cio: change confusing message in cmf.
  [S390] cio: dont forget to set last slot to NULL in ccw_uevent().
2007-08-22 11:12:08 -07:00
Zachary Amsden
8b14cb9953 Fix lazy mode vmalloc synchronization for paravirt
Touching vmalloc memory in the middle of a lazy mode update can generate
a kernel PDE update, which must be flushed immediately.  The fix is to
leave lazy mode when doing a vmalloc sync.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22 11:10:47 -07:00
David Wilder
9c5f225f1a [S390] kprobes: fix instruction length calculation
Placing a kprobe on "bc" instruction (s390/s390x) can cause an oops.
The instruction length is encoded into the first two bits of the s390
instruction. Kprobe is incorrectly computing the instruction length.
The instruction length is used for determining what type of "fix-up" is
needed for conditional branch instruction. The problem can bee seen by
placing a kprobe on a "bc" instruction that will not branch. The
results is that Kprobe incorrectly computes the new instruction
pointer (psw.addr) after single stepping the instruction. The problem
is corrected with this patch.

Signed-off-by: David Wilder <dwilder@us.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-08-22 13:51:49 +02:00
Michael Holzheu
9b5a03e198 [S390] hypfs: inode corruption due to missing locking
hypfs removes the whole hypfs directory tree and creates a new one, when a
process triggers an update by writing to the "update" attribute. When removing
and creating files, it is necessary to lock the inode of the parent directory
where the files live. Currently hypfs does not lock the parent inode, which
can lead to inode corruption. This patch:
 * Introduces correct locking
 * Fixes i_nlink reference counting for inodes, when creating directories
 * Adds info printk, when hypfs filesystem has been mounted

Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-08-22 13:51:49 +02:00
Christian Borntraeger
cee9e53f59 [S390] disassembler: fix b2 opcodes like srst, bsg, and others
The instruction table for b2 opcodes was missing an opfrag value
for the cpya instruction. All instructions specified after cpya
were not considered by the disassembler. The fix is simple and
obvious - add the opfrag field to the cpya instruction.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-08-22 13:51:48 +02:00
Michael Holzheu
0a87c5cfc0 [S390] vmur: fix diag14 exceptions with addresses > 2GB.
There are several s390 diagnose calls, which must be executed below the
2GB memory boundary. In order to enforce this, those diagnoses must be
compiled into the kernel. Currently diag 14 can be called within the
vmur kernel module from addresses above 2GB. This leads to specification
exceptions. This patch moves diag10, diag14 and diag210 into the new
diag.c file.

Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-08-22 13:51:47 +02:00
Kumar Gala
15f6ddc7d9 [POWERPC] Fix PCI Device ID for MPC8544/8533 processors
The initial user manuals for MPC8544/8533 had some issues with properly
documenting the device IDs for MPC8544/8533.  These processors are almost
identical and both show up on the reference boards.

Fix up the quirks for PCIe support to handle MPC8533/E.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-21 19:15:31 -05:00
Andi Kleen
36ce151411 i386: Mark NUMA support experimental
I did some testing and found quite a lot of problems (doesn't
boot at all on non NUMA and misassigns cores on Opteron systems).

Mark it as experimental and warn against its use for now.

It's still default y for SUMMIT/NUMAQ because it'll presumably
work on these systems.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-21 10:06:44 -07:00
David S. Miller
efb896300c [SPARC32]: Revert f642b26380.
This causes boot failures for some people.
It looks like in fact that some SILO provided
ramdisk images should not be KERNBASE normalized.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-20 23:40:01 -07:00
Linus Torvalds
38f061c571 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide-disk: workaround for buggy HPA support on ST340823A (take 3)
  hpt34x: fix CONFIG_HPT34X_AUTODMA=n handling
  triflex: add missing ->dma_base check
  pdc202xx_old: add missing ->dma_base check
  pdc202xx_new: add missing ->dma_base check
  cs5530: add missing ->dma_base check
  ide: ide_config_drive_speed() bugfixes
  ide: add cable detection for early UDMA66 devices (take 3)
  ide-pmac: fix drive->init_speed reporting
  ide: config_drive_for_dma() fixes
  ide-cris: fix ->set_pio_mode method to set transfer mode on the device
  ide: fix hidden dependencies on CONFIG_IDE_GENERIC
  ide: make CONFIG_IDE_GENERIC default to N
2007-08-20 22:48:42 -07:00
Linus Torvalds
2046219364 Merge branch 'fixes-2.6.23' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc
* 'fixes-2.6.23' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc:
  [POWERPC] Fix 8xx compile failure
  [POWERPC] Fix FSL BookE machine check reporting
  [POWERPC] Fix interrupt routing and setup of ULI M1575 on FSL boards
  [POWERPC] Add interrupt resource for RTC CMOS driver
2007-08-20 22:43:18 -07:00
Bartlomiej Zolnierkiewicz
2195dadf85 ide: fix hidden dependencies on CONFIG_IDE_GENERIC
Some host drivers depend on CONFIG_IDE_GENERIC to do the probing but their
config options lack explicit dependencies on IDE_GENERIC.  In the long-term
these host drivers should be fixed to do the probing themselves but for now
fix them by making their config options select CONFIG_IDE_GENERIC.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-20 22:42:54 +02:00
Chris Wright
d34fda4a84 x86: properly initialize temp insn buffer for paravirt patching
With commit ab144f5ec6 the patching code
now collects the complete new instruction stream into a temp buffer
before finally patching in the new insns.  In some cases the paravirt
patchers will choose to leave the patch site unpatched (length mismatch,
clobbers mismatch, etc).

This causes the new patching code to copy an uninitialized temp buffer,
i.e.  garbage, to the callsite.  Simply make sure to always initialize
the buffer with the original instruction stream.  A better fix is to
audit all the patchers and return proper length so that apply_paravirt()
can skip copies when we leave the patch site untouched.

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-18 15:15:54 -07:00
Linus Torvalds
18115f4537 Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 4549/1: KS8695: Fix build errors
  [ARM] 4546/1: s3c2410: fix architecture typo for s3c2442
  [ARM] 4544/1: arm: fix section mismatch in pxa fb
2007-08-18 10:28:21 -07:00
Andi Kleen
f0f12d85af x86_64: Check for .cfi_rel_offset in CFI probe
Very old 64bit binutils have .cfi_startproc/endproc, but
no .cfi_rel_offset. Check for .cfi_rel_offset too.

Cc: Jan Beulich <jbeulich@novell.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-18 10:25:25 -07:00
Andi Kleen
6e3515352b x86_64: Change PMDS invocation to single macro
Very old binutils (2.12.90...) seem to have trouble with newlines
in assembler macro invocation. They put them into the resulting
argument expansion. In this case this lead to a parse error because
a .rept expression ended up spread over multiple lines. Change the PMDS()
invocation to a single line.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-18 10:25:25 -07:00
Daniel Gollub
0328ecef90 x86_64: Fix to keep watchdog disabled by default for i386/x86_64
Fixed wrong expression which enabled watchdogs even if nmi_watchdog kernel
parameter wasn't set. This regression got slightly introduced with commit
b7471c6da9.

Introduced NMI_DISABLED (-1) which allows to switch the value of NMI_DEFAULT
without breaking the APIC NMI watchdog code (again).

Fixes:
   https://bugzilla.novell.com/show_bug.cgi?id=298084
   http://bugzilla.kernel.org/show_bug.cgi?id=7839
And likely some more nmi_watchdog=0 related issues.

Signed-off-by: Daniel Gollub <dgollub@suse.de>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-18 10:25:25 -07:00
Andi Kleen
8154549cb8 x86_64: Fail dma_alloc_coherent on dma less devices
This should fix an oops with PCMCIA PATA devices

	http://bugzilla.kernel.org/show_bug.cgi?id=8424

This is not a full fix for the problem, but probably
still the right thing to do.

[ I'm almost certain it's *not* the right thing to do, but it avoids an
  oops, and I want comments from others on what the right thing would
  actually be..  I suspect we should just remove the use of dma_mask
  entirely in this function, and just use coherent_dma_mask.  - Linus ]

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-18 10:25:25 -07:00
Jan Engelhardt
06bfb7eb15 Add some help texts to recently-introduced kconfig items
Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (edited MACINTOSH_DRIVERS per Geert Uytterhoeven's remark)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-18 09:52:50 -07:00
Linus Torvalds
56616ebd0e Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6:
  sh64: arch/sh64/kernel/setup.c: duplicate include removal.
  sh64: arch/sh64/kernel/signal.c: duplicate include removal
  sh64: Add missing dma_sync_single_for_*().
2007-08-18 09:43:40 -07:00
Linus Torvalds
203f339439 Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.23
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.23:
  sh: remove extraneous ; on scif_sercon_putc wait loop
  sh: Add missing dma_sync_single_range_for_*().
  sh: panic on machvec section misalignment.
  sh: Fix PTRACE_PEEKTEXT/PEEKDATA fallout from generic_ptrace_peekdata().
2007-08-18 09:42:43 -07:00
Linus Torvalds
ed72df4482 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  Cross-compilation between e.g. i386 -> 64bit could break -> work around it
  [IA64] Enable early console for Ski simulator
  [IA64] forbid ptrace changes psr.ri to 3
  [IA64] Failure to grow RBS
  [IA64] Fix processor_get_freq
  [IA64] SGI Altix : fix a force_interrupt bug on altix
  [IA64] Update arch/ia64/configs/* s/SLAB/SLUB/
  [IA64] get back PT_IA_64_UNWIND program header
  [IA64] need NOTES in vmlinux.lds.S
  [IA64] make unwinder stop at last frame of the bootloader
  [IA64] Clean up CPE handler registration
  [IA64] Include Kconfig.preempt
  [IA64] SN2 needs platform specific irq_to_vector() function.
  [IA64] Use atomic64_read to read an atomic64_t.
  [IA64] disable irq's and check need_resched before safe_halt
2007-08-18 09:38:56 -07:00
Linus Torvalds
5bc705e9fe Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [MATH-EMU]: Fix underflow exception reporting.
  [SPARC64]: Create a HWCAP_SPARC_N2 and report it to userspace on Niagara-2.
  [SPARC64]: SMP trampoline needs to avoid %tick_cmpr on sun4v too.
  [SPARC64]: Do not touch %tick_cmpr on sun4v cpus.
  [SPARC64]: Niagara-2 optimized copies.
  [SPARC64]: Allow userspace to get at the machine description.
  [SPARC32]: Remove superfluous 'kernel_end' alignment on sun4c.
  [SPARC32]: Fix bogus ramdisk image location check.
  [SPARC32]: Remove iommu from struct sbus_bus and use archdata like sparc64.
2007-08-18 09:34:28 -07:00
Linus Torvalds
585eb6daa4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
  [AVR32] Define mmiowb()
  [AVR32] Fix bogus pte_page() definition
  [AVR32] Simplify pte_alloc_one{,_kernel}
  include/asm-avr32/pgalloc.h: kmalloc + memset conversion to kcalloc
  [AVR32] Wire up i2c-gpio on the ATNGW100 board
  [AVR32] leds-gpio for stk1000
2007-08-18 09:33:43 -07:00
Linus Torvalds
844d6c48be Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Fix invalid semicolon after if statement
  [POWERPC] ps3: Fix no storage devices found
  [POWERPC] Fix for assembler -g
  [POWERPC] Fix small race in 44x tlbie function
  [POWERPC] Remove unused code causing a compile warning
  [POWERPC] cell: Fix errno for modular spufs_create with invalid neighbour
2007-08-18 09:33:25 -07:00
Peter Chubb
471e7a4484 [IA64] Enable early console for Ski simulator
When using Ski to debug early startup, it's a bit of a pain not to
have printk.

This patch enables the simulated console very early.
It may be worth conditionalising on the command line... but this is
enough for now.

Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-08-17 13:44:15 -07:00
Shaohua Li
b09e789c43 [IA64] forbid ptrace changes psr.ri to 3
The "ri" field in the processor status register only has defined
values of 0, 1, 2.  Do not let ptrace set this to 3.  As with
other reserved fields in registers we silently discard the value.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-08-17 13:43:50 -07:00
Kumar Gala
0af666fa6c [POWERPC] Fix 8xx compile failure
CC      arch/powerpc/sysdev/commproc.o
arch/powerpc/sysdev/fsl_soc.c: In function fsl_pcmcia_of_init:
arch/powerpc/sysdev/fsl_soc.c:1109: error: implicit declaration of function of_platform_device_create

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-17 13:22:33 -05:00
Becky Bruce
86d7a9a9c4 [POWERPC] Fix FSL BookE machine check reporting
Reserved MCSR bits on FSL BookE parts may have spurious values
when mcheck occurs.  Mask these off when printing the MCSR to
avoid confusion.  Also, get rid of the MCSR_GL_CI bit defined
for e500 - this bit doesn't actually have any meaning.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-17 13:22:28 -05:00
Kumar Gala
b66510cb99 [POWERPC] Fix interrupt routing and setup of ULI M1575 on FSL boards
The interrupt routing in the device trees for the ULI M1575 was
inproperly using the interrupt line field as pci function.  Fixed
up the device tree's to actual conform for to specification and
changed the interrupt mapping code so it just uses a static mapping
setup as follows:

PIRQA - IRQ9
PIRQB - IRQ10
PIRQC - IRQ11
PIRQD - IRQ12
USB 1.1 OCHI (1c.0) - IRQ12
USB 1.1 OCHI (1c.1) - IRQ9
USB 1.1 OCHI (1c.2) - IRQ10
USB 1.1 ECHI (1c.3) - IRQ11
LAN (1b.0) - IRQ6
AC97 (1d.0) - IRQ6
Modem (1d.1) - IRQ6
HD Audio (1d.2) - IRQ6
SATA (1f.1) - IRQ5
SMB (1e.1) - IRQ7
PMU (1e.2) - IRQ7
PATA (1f.0) - IRQ14/15

Took the oppurtunity to refactor the code into a single file so we
don't have to duplicate these fixes on the two current boards in the
tree and several forth coming boards that will also need the code.

Fixed RTC support that requires a dummy memory read on the P2P bridge
to unlock the RTC and setup the default of the RTC alarm registers to
match with a basic x86 style CMOS RTC.

Moved code that poked ISA registers to a FIXUP_FINAL quirk to ensure
the PCI IO space has been setup properly before we start poking ISA
registers at random locations.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-17 13:22:16 -05:00
Kumar Gala
ada3ea6fcd [POWERPC] Add interrupt resource for RTC CMOS driver
The RTC CMOS driver expects the interrupt to be a resource of the platform
device.  Use a fixed interrupt value of 8 since on PPC if we are using this
its off an i8259 which we ensure has interrupt numbers 0..15.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-17 13:18:58 -05:00
Ilpo Järvinen
2b02d13996 [POWERPC] Fix invalid semicolon after if statement
A similar fix to netfilter from Eric Dumazet inspired me to
look around a bit by using some grep/sed stuff as looking for
this kind of bugs seemed easy to automate.  This is one of them
I found where it looks like this semicolon is not valid.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 10:48:52 +10:00
Andrew Burgess
e8c59c0cf9 [IA64] Failure to grow RBS
There is a bug in the ia64_do_page_fault code that can cause a failure
to grow the register backing store, or any mapping that is marked as
VM_GROWSUP if the mapping is the highest mapped area of memory.

When the address accessed is below the first mapping the previous mapping
is returned as NULL, and this case is handled.  However, when the address
accessed is above the highest mapping the vma returned is NULL, this
case is not handled correctly, and it fails to spot that this access
might require an existing mapping to grow upwards.

Signed-off-by: Andrew Burgess <andrew@transitive.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-08-16 10:30:46 -07:00
Andy Whitcroft
96989d9d75 sh: remove extraneous ; on scif_sercon_putc wait loop
It seems we have gained an extraneous trailing ';' on one of the
wait loops in scif_sercon_putc().  Although this is completely
benign as the apparent payload is also the empty statement, it
invites error in the future.  Clean it up now.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-08-17 01:25:34 +09:00
David S. Miller
7dc408808a [SPARC64]: SMP trampoline needs to avoid %tick_cmpr on sun4v too.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-16 01:56:00 -07:00
David S. Miller
53140b71c5 [SPARC64]: Do not touch %tick_cmpr on sun4v cpus.
This register is not a part of the sun4v architecture.

Niagara 1 and 2 happened to leave it around.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-16 01:52:44 -07:00
David S. Miller
cf5adce117 [SPARC64]: Niagara-2 optimized copies.
The bzero/memset implementation stays the same as Niagara-1.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-16 01:47:25 -07:00
David S. Miller
0fdb7f96d8 [SPARC64]: Allow userspace to get at the machine description.
Like the OF device tree, it's useful to let userland get
at the machine description so it can pretty print the
graph etc.

The implementation is a simple MISC device with a read method.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-15 21:02:23 -07:00
Alex Williamson
182fdd225d [IA64] Fix processor_get_freq
The core cpufreq code doesn't appear to understand returning -EAGAIN
for the get() function of the cpufreq_driver.  If PAL_GET_PSTATE returns
-1, such as when running on Xen, scaling_cur_freq is happy to return
4294967285 kHz (ie. (unsigned)-11).  The other drivers appear to return
0 for a failure, and doing so gives me the max frequency from
scaling_cur_frequency and "<unknown>" from cpuinfo_cur_frequency.  I
believe that's the desired behavior.

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-08-15 13:20:38 -07:00
Haavard Skinnemoen
54bb69e250 [AVR32] Wire up i2c-gpio on the ATNGW100 board
The NGW100 has a board controller which is hooked up to the TWI lines
on AP7000. Since the TWI driver isn't in mainline, use the i2c-gpio
driver in the mean time.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-08-15 16:36:55 +02:00
David Brownell
ad93ab0a6e [AVR32] leds-gpio for stk1000
Add GPIO led support: J2 to either block of LEDs on the STK1000.

This uses the new LEDS_GPIO driver, and sets up a heartbeat trigger by
default ... either bright (!!) amber, or a more interesting purple.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-08-15 16:36:55 +02:00
Geert Uytterhoeven
2de69124e8 [POWERPC] ps3: Fix no storage devices found
Fix probing of PS3 storage devices: in the success case, we should set
`error' to zero, not `result'.

Without this patch no storage devices are found.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-15 15:12:50 +10:00
Roland McGrath
55a910a81d [POWERPC] Fix for assembler -g
ppc64 does the unusual thing of using #include on a compiler-generated
assembly file (lparmap.s) from an assembly source file (head_64.S).
This runs afoul of my recent patch to pass -gdwarf2 to the assembler
under CONFIG_DEBUG_INFO.  This patch avoids the problem by disabling
DWARF generation (-g0) when producing lparmap.s.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-15 15:12:50 +10:00
David Gibson
aa1cf632bd [POWERPC] Fix small race in 44x tlbie function
The 440 family of processors don't have a tlbie instruction.  So, we
implement TLB invalidates by explicitly searching the TLB with tlbsx.,
then clobbering the relevant entry, if any.  Unfortunately the PID for
the search needs to be stored in the MMUCR register, which is also
used by the TLB miss handler.  Interrupts were enabled in _tlbie(), so
an interrupt between loading the MMUCR and the tlbsx could cause
incorrect search results, and thus a failure to invalide TLB entries
which needed to be invalidated.

This fixes the problem in both arch/ppc and arch/powerpc by inhibiting
interrupts (even critical and debug interrupts) across the relevant
instructions.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-15 15:12:50 +10:00
Becky Bruce
fa6b769a8e [POWERPC] Remove unused code causing a compile warning
AFAICT, nobody is using ft_ordered(), and it causes a build warning
to be generated.  This patch cleans that up by removing the function
and the commented-out code that calls it.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-15 15:12:50 +10:00
Jeremy Kerr
ad941fe4b6 [POWERPC] cell: Fix errno for modular spufs_create with invalid neighbour
At present, spu_create with an invalid neighbo(u)r will return -ENOSYS,
not -EBADF, but only when spufs.o is built as a module.

This change adds the appropriate errno, making the behaviour the same
as the built-in case.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-15 15:12:44 +10:00
Mark Fortescue
70b0e7a919 [SPARC32]: Remove superfluous 'kernel_end' alignment on sun4c.
In sun4c_init_clean_mmu(), aligning 'kernel_end' using
SUN4C_REAL_PGDIR_ALIGN() is unnecessary since the caller
does this already.

In sun4c_paging_init(), 4 page sizes of "fluff" were added
to the address of &end.  This was necessary a long time ago
when sparc32 would allocate some early data structures
by carving out memory chunks after &end but that no longer
occurs.

Signed-off-by: Mark Fortescue <mark@mtfhpc.demon.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-14 18:24:10 -07:00
Mark Fortescue
f642b26380 [SPARC32]: Fix bogus ramdisk image location check.
This mirrors sparc64 commit 715a0ecc29

sparc_ramdisk_image should always be decremented by KERNBASE.

Signed-off-by: Mark Fortescue <mark@mtfhpc.demon.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-14 18:22:03 -07:00
H. Peter Anvin
9a5f35d4ed [x86 setup] edd.c: make sure MBR signatures actually get reported
When filling in the MBR signature array, the setup code failed to advance
boot_params.edd_mbr_sig_buf_entries, which resulted in the valid data
being ignored.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2007-08-14 17:55:31 -07:00