Commit graph

116 commits

Author SHA1 Message Date
Dan Williams
0f94e87cde md: fix data corruption when a degraded raid5 array is reshaped
We currently do not wait for the block from the missing device to be
computed from parity before copying data to the new stripe layout.

The change in the raid6 code is not techincally needed as we don't delay
data block recovery in the same way for raid6 yet.  But making the change
now is safer long-term.

This bug exists in 2.6.23 and 2.6.24-rc

Cc: <stable@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-08 16:10:35 -08:00
Dan Williams
6c55be8b96 raid5: fix unending write sequence
<debug output from Joel's system>
handling stripe 7629696, state=0x14 cnt=1, pd_idx=2 ops=0:0:0
check 5: state 0x6 toread 0000000000000000 read 0000000000000000 write fffff800ffcffcc0 written 0000000000000000
check 4: state 0x6 toread 0000000000000000 read 0000000000000000 write fffff800fdd4e360 written 0000000000000000
check 3: state 0x1 toread 0000000000000000 read 0000000000000000 write 0000000000000000 written 0000000000000000
check 2: state 0x1 toread 0000000000000000 read 0000000000000000 write 0000000000000000 written 0000000000000000
check 1: state 0x6 toread 0000000000000000 read 0000000000000000 write fffff800ff517e40 written 0000000000000000
check 0: state 0x6 toread 0000000000000000 read 0000000000000000 write fffff800fd4cae60 written 0000000000000000
locked=4 uptodate=2 to_read=0 to_write=4 failed=0 failed_num=0
for sector 7629696, rmw=0 rcw=0
</debug>

These blocks were prepared to be written out, but were never handled in
ops_run_biodrain(), so they remain locked forever.  The operations flags
are all clear which means handle_stripe() thinks nothing else needs to be
done.

This state suggests that the STRIPE_OP_PREXOR bit was sampled 'set' when it
should not have been.  This patch cleans up cases where the code looks at
sh->ops.pending when it should be looking at the consistent stack-based
snapshot of the operations flags.

Report from Joel:
	Resync done. Patch fix this bug.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Joel Bertrand <joel.bertrand@systella.fr>
Cc: <stable@kernel.org>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:39 -08:00
Alan D. Brunelle
2ad8b1ef11 Add UNPLUG traces to all appropriate places
Added blk_unplug interface, allowing all invocations of unplugs to result
in a generated blktrace UNPLUG.

Signed-off-by: Alan D. Brunelle <Alan.Brunelle@hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-11-09 13:41:32 +01:00
Neil Brown
def6ae26a9 md: fix misapplied patch in raid5.c
commit 4ae3f847e4 ("md: raid5: fix
clearing of biofill operations") did not get applied correctly,
presumably due to substantial similarities between handle_stripe5 and
handle_stripe6.

This patch moves the chunk of new code from handle_stripe6 (where it isn't
needed (yet)) to handle_stripe5.

Signed-off-by: Neil Brown <neilb@suse.de>
Cc: "Dan Williams" <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-05 15:12:32 -08:00
Dan Williams
4ae3f847e4 md: raid5: fix clearing of biofill operations
ops_complete_biofill() runs outside of spin_lock(&sh->lock) and clears the
'pending' and 'ack' bits.  Since the test_and_ack_op() macro only checks
against 'complete' it can get an inconsistent snapshot of pending work.

Move the clearing of these bits to handle_stripe5(), under the lock.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Joel Bertrand <joel.bertrand@systella.fr>
Signed-off-by: Neil Brown <neilb@suse.de>
Cc: Stable <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23 08:32:06 -07:00
Jens Axboe
fd5d806266 block: convert blkdev_issue_flush() to use empty barriers
Then we can get rid of ->issue_flush_fn() and all the driver private
implementations of that.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:05:02 +02:00
NeilBrown
6712ecf8f6 Drop 'size' argument from bio_endio and bi_end_io
As bi_end_io is only called once when the reqeust is complete,
the 'size' argument is now redundant.  Remove it.

Now there is no need for bio_endio to subtract the size completed
from bi_size.  So don't do that either.

While we are at it, change bi_end_io to return void.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-10 09:25:57 +02:00
Dan Williams
e4d84909dd raid5: fix 2 bugs in ops_complete_biofill
1/ ops_complete_biofill tried to avoid calling handle_stripe since all the
state necessary to return read completions is available.  However the
process of determining whether more read requests are pending requires
locking the stripe (to block add_stripe_bio from updating dev->toead).
ops_complete_biofill can run in tasklet context, so rather than upgrading
all the stripe locks from spin_lock to spin_lock_bh this patch just
unconditionally reschedules handle_stripe after completing the read
request.

2/ ops_complete_biofill needlessly qualified processing R5_Wantfill with
dev->toread.  The result being that the 'biofill' pending bit is cleared
before handling the pending read-completions on dev->read.  R5_Wantfill can
be unconditionally handled because the 'biofill' pending bit prevents new
R5_Wantfill requests from being seen by ops_run_biofill and
ops_complete_biofill.

Found-by: Yuri Tikhonov <yur@emcraft.com>
[neilb@suse.de: simpler fix for bug 1 than moving code]
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2007-09-24 13:23:35 -07:00
NeilBrown
a2e0855182 md: fix some bugs with growing raid5/raid6 arrays.
The recent changed to raid5 to allow offload of parity calculation etc
introduced some bugs in the code for growing (i.e.  adding a disk to) raid5
and raid6.  This fixes them

Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-11 17:21:19 -07:00
Jens Axboe
165125e1e4 [BLOCK] Get rid of request_queue_t typedef
Some of the code has been gradually transitioned to using the proper
struct request_queue, but there's lots left. So do a full sweet of
the kernel and get rid of this typedef and replace its uses with
the proper type.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-24 09:28:11 +02:00
Dan Williams
eb0645a8b1 async_tx: fix kmap_atomic usage in async_memcpy
Andrew Morton:
	[async_memcpy] is very wrong if both ASYNC_TX_KMAP_DST and
	ASYNC_TX_KMAP_SRC can ever be set.  We'll end up using the same kmap
	slot for both src add dest and we get either corrupted data or a BUG.

Evgeniy Polyakov:
	Btw, shouldn't it always be kmap_atomic() even if flag is not set.
	That pages are usual one returned by alloc_page().

So fix the usage of kmap_atomic and kill the ASYNC_TX_KMAP_DST and
ASYNC_TX_KMAP_SRC flags.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-20 08:44:19 -07:00
Paul Mundt
20c2df83d2 mm: Remove slab destructors from kmem_cache_create().
Slab destructors were no longer supported after Christoph's
c59def9f22 change. They've been
BUGs for both slab and slub, and slob never supported them
either.

This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 10:11:58 +09:00
Dan Williams
f6dff381af md: remove raid5 compute_block and compute_parity5
replaced by raid5_run_ops

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-By: NeilBrown <neilb@suse.de>
2007-07-13 08:06:18 -07:00
Dan Williams
830ea01673 md: handle_stripe5 - request io processing in raid5_run_ops
I/O submission requests were already handled outside of the stripe lock in
handle_stripe.  Now that handle_stripe is only tasked with finding work,
this logic belongs in raid5_run_ops.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-By: NeilBrown <neilb@suse.de>
2007-07-13 08:06:17 -07:00
Dan Williams
f0a50d3754 md: handle_stripe5 - add request/completion logic for async expand ops
When a stripe is being expanded bulk copying takes place to move the data
from the old stripe to the new.  Since raid5_run_ops only operates on one
stripe at a time these bulk copies are handled in-line under the stripe
lock.  In the dma offload case we poll for the completion of the operation.

After the data has been copied into the new stripe the parity needs to be
recalculated across the new disks.  We reuse the existing postxor
functionality to carry out this calculation.  By setting STRIPE_OP_POSTXOR
without setting STRIPE_OP_BIODRAIN the completion path in handle stripe
can differentiate expand operations from normal write operations.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-By: NeilBrown <neilb@suse.de>
2007-07-13 08:06:17 -07:00
Dan Williams
b5e98d65d3 md: handle_stripe5 - add request/completion logic for async read ops
When a read bio is attached to the stripe and the corresponding block is
marked R5_UPTODATE, then a read (biofill) operation is scheduled to copy
the data from the stripe cache to the bio buffer.  handle_stripe flags the
blocks to be operated on with the R5_Wantfill flag.  If new read requests
arrive while raid5_run_ops is running they will not be handled until
handle_stripe is scheduled to run again.

Changelog:
* cleanup to_read and to_fill accounting
* do not fail reads that have reached the cache

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-By: NeilBrown <neilb@suse.de>
2007-07-13 08:06:17 -07:00
Dan Williams
e89f89629b md: handle_stripe5 - add request/completion logic for async check ops
Check operations are scheduled when the array is being resynced or an
explicit 'check/repair' command was sent to the array.  Previously check
operations would destroy the parity block in the cache such that even if
parity turned out to be correct the parity block would be marked
!R5_UPTODATE at the completion of the check.  When the operation can be
carried out by a dma engine the assumption is that it can check parity as a
read-only operation.  If raid5_run_ops notices that the check was handled
by hardware it will preserve the R5_UPTODATE status of the parity disk.

When a check operation determines that the parity needs to be repaired we
reuse the existing compute block infrastructure to carry out the operation.
Repair operations imply an immediate write back of the data, so to
differentiate a repair from a normal compute operation the
STRIPE_OP_MOD_REPAIR_PD flag is added.

Changelog:
* remove test_and_set/test_and_clear BUG_ONs, Neil Brown

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-By: NeilBrown <neilb@suse.de>
2007-07-13 08:06:17 -07:00
Dan Williams
f38e12199a md: handle_stripe5 - add request/completion logic for async compute ops
handle_stripe will compute a block when a backing disk has failed, or when
it determines it can save a disk read by computing the block from all the
other up-to-date blocks.

Previously a block would be computed under the lock and subsequent logic in
handle_stripe could use the newly up-to-date block.  With the raid5_run_ops
implementation the compute operation is carried out a later time outside
the lock.  To preserve the old functionality we take advantage of the
dependency chain feature of async_tx to flag the block as R5_Wantcompute
and then let other parts of handle_stripe operate on the block as if it
were up-to-date.  raid5_run_ops guarantees that the block will be ready
before it is used in another operation.

However, this only works in cases where the compute and the dependent
operation are scheduled at the same time.  If a previous call to
handle_stripe sets the R5_Wantcompute flag there is no facility to pass the
async_tx dependency chain across successive calls to raid5_run_ops.  The
req_compute variable protects against this case.

Changelog:
* remove the req_compute BUG_ON

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-By: NeilBrown <neilb@suse.de>
2007-07-13 08:06:17 -07:00
Dan Williams
e33129d841 md: handle_stripe5 - add request/completion logic for async write ops
After handle_stripe5 decides whether it wants to perform a
read-modify-write, or a reconstruct write it calls
handle_write_operations5.  A read-modify-write operation will perform an
xor subtraction of the blocks marked with the R5_Wantprexor flag, copy the
new data into the stripe (biodrain) and perform a postxor operation across
all up-to-date blocks to generate the new parity.  A reconstruct write is run
when all blocks are already up-to-date in the cache so all that is needed
is a biodrain and postxor.

On the completion path STRIPE_OP_PREXOR will be set if the operation was a
read-modify-write.  The STRIPE_OP_BIODRAIN flag is used in the completion
path to differentiate write-initiated postxor operations versus
expansion-initiated postxor operations.  Completion of a write triggers i/o
to the drives.

Changelog:
* make the 'rcw' parameter to handle_write_operations5 a simple flag, Neil Brown
* remove test_and_set/test_and_clear BUG_ONs, Neil Brown

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-By: NeilBrown <neilb@suse.de>
2007-07-13 08:06:16 -07:00
Dan Williams
d84e0f10d3 md: common infrastructure for running operations with raid5_run_ops
All the handle_stripe operations that are to be transitioned to use
raid5_run_ops need a method to coherently gather work under the stripe-lock
and hand that work off to raid5_run_ops.  The 'get_stripe_work' routine
runs under the lock to read all the bits in sh->ops.pending that do not
have the corresponding bit set in sh->ops.ack.  This modified 'pending'
bitmap is then passed to raid5_run_ops for processing.

The transition from 'ack' to 'completion' does not need similar protection
as the existing release_stripe infrastructure will guarantee that
handle_stripe will run again after a completion bit is set, and
handle_stripe can tolerate a sh->ops.completed bit being set while the lock
is held.

A call to async_tx_issue_pending_all() is added to raid5d to kick the
offload engines once all pending stripe operations work has been submitted.
This enables batching of the submission and completion of operations.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-By: NeilBrown <neilb@suse.de>
2007-07-13 08:06:16 -07:00
Dan Williams
91c0092484 md: raid5_run_ops - run stripe operations outside sh->lock
When the raid acceleration work was proposed, Neil laid out the following
attack plan:

1/ move the xor and copy operations outside spin_lock(&sh->lock)
2/ find/implement an asynchronous offload api

The raid5_run_ops routine uses the asynchronous offload api (async_tx) and
the stripe_operations member of a stripe_head to carry out xor+copy
operations asynchronously, outside the lock.

To perform operations outside the lock a new set of state flags is needed
to track new requests, in-flight requests, and completed requests.  In this
new model handle_stripe is tasked with scanning the stripe_head for work,
updating the stripe_operations structure, and finally dropping the lock and
calling raid5_run_ops for processing.  The following flags outline the
requests that handle_stripe can make of raid5_run_ops:

STRIPE_OP_BIOFILL
 - copy data into request buffers to satisfy a read request
STRIPE_OP_COMPUTE_BLK
 - generate a missing block in the cache from the other blocks
STRIPE_OP_PREXOR
 - subtract existing data as part of the read-modify-write process
STRIPE_OP_BIODRAIN
 - copy data out of request buffers to satisfy a write request
STRIPE_OP_POSTXOR
 - recalculate parity for new data that has entered the cache
STRIPE_OP_CHECK
 - verify that the parity is correct
STRIPE_OP_IO
 - submit i/o to the member disks (note this was already performed outside
   the stripe lock, but it made sense to add it as an operation type

The flow is:
1/ handle_stripe sets STRIPE_OP_* in sh->ops.pending
2/ raid5_run_ops reads sh->ops.pending, sets sh->ops.ack, and submits the
   operation to the async_tx api
3/ async_tx triggers the completion callback routine to set
   sh->ops.complete and release the stripe
4/ handle_stripe runs again to finish the operation and optionally submit
   new operations that were previously blocked

Note this patch just defines raid5_run_ops, subsequent commits (one per
major operation type) modify handle_stripe to take advantage of this
routine.

Changelog:
* removed ops_complete_biodrain in favor of ops_complete_postxor and
  ops_complete_write.
* removed the raid5_run_ops workqueue
* call bi_end_io for reads in ops_complete_biofill, saves a call to
  handle_stripe
* explicitly handle the 2-disk raid5 case (xor becomes memcpy), Neil Brown
* fix race between async engines and bi_end_io call for reads, Neil Brown
* remove unnecessary spin_lock from ops_complete_biofill
* remove test_and_set/test_and_clear BUG_ONs, Neil Brown
* remove explicit interrupt handling for channel switching, this feature
  was absorbed (i.e. it is now implicit) by the async_tx api
* use return_io in ops_complete_biofill

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-By: NeilBrown <neilb@suse.de>
2007-07-13 08:06:15 -07:00
Dan Williams
45b4233caa raid5: replace custom debug PRINTKs with standard pr_debug
Replaces PRINTK with pr_debug, and kills the RAID5_DEBUG definition in
favor of the global DEBUG definition.  To get local debug messages just add
'#define DEBUG' to the top of the file.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-By: NeilBrown <neilb@suse.de>
2007-07-13 08:06:15 -07:00
Dan Williams
a445685647 raid5: refactor handle_stripe5 and handle_stripe6 (v3)
handle_stripe5 and handle_stripe6 have very deep logic paths handling the
various states of a stripe_head.  By introducing the 'stripe_head_state'
and 'r6_state' objects, large portions of the logic can be moved to
sub-routines.

'struct stripe_head_state' consumes all of the automatic variables that previously
stood alone in handle_stripe5,6.  'struct r6_state' contains the handle_stripe6
specific variables like p_failed and q_failed.

One of the nice side effects of the 'stripe_head_state' change is that it
allows for further reductions in code duplication between raid5 and raid6.
The following new routines are shared between raid5 and raid6:

	handle_completed_write_requests
	handle_requests_to_failed_array
	handle_stripe_expansion

Changes:
* v2: fixed 'conf->raid_disk-1' for the raid6 'handle_stripe_expansion' path
* v3: removed the unused 'dirty' field from struct stripe_head_state
* v3: coalesced open coded bi_end_io routines into return_io()

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-By: NeilBrown <neilb@suse.de>
2007-07-13 08:06:15 -07:00
Dan Williams
9bc89cd82d async_tx: add the async_tx api
The async_tx api provides methods for describing a chain of asynchronous
bulk memory transfers/transforms with support for inter-transactional
dependencies.  It is implemented as a dmaengine client that smooths over
the details of different hardware offload engine implementations.  Code
that is written to the api can optimize for asynchronous operation and the
api will fit the chain of operations to the available offload resources. 
 
	I imagine that any piece of ADMA hardware would register with the
	'async_*' subsystem, and a call to async_X would be routed as
	appropriate, or be run in-line. - Neil Brown

async_tx exploits the capabilities of struct dma_async_tx_descriptor to
provide an api of the following general format:

struct dma_async_tx_descriptor *
async_<operation>(..., struct dma_async_tx_descriptor *depend_tx,
			dma_async_tx_callback cb_fn, void *cb_param)
{
	struct dma_chan *chan = async_tx_find_channel(depend_tx, <operation>);
	struct dma_device *device = chan ? chan->device : NULL;
	int int_en = cb_fn ? 1 : 0;
	struct dma_async_tx_descriptor *tx = device ?
		device->device_prep_dma_<operation>(chan, len, int_en) : NULL;

	if (tx) { /* run <operation> asynchronously */
		...
		tx->tx_set_dest(addr, tx, index);
		...
		tx->tx_set_src(addr, tx, index);
		...
		async_tx_submit(chan, tx, flags, depend_tx, cb_fn, cb_param);
	} else { /* run <operation> synchronously */
		...
		<operation>
		...
		async_tx_sync_epilog(flags, depend_tx, cb_fn, cb_param);
	}

	return tx;
}

async_tx_find_channel() returns a capable channel from its pool.  The
channel pool is organized as a per-cpu array of channel pointers.  The
async_tx_rebalance() routine is tasked with managing these arrays.  In the
uniprocessor case async_tx_rebalance() tries to spread responsibility
evenly over channels of similar capabilities.  For example if there are two
copy+xor channels, one will handle copy operations and the other will
handle xor.  In the SMP case async_tx_rebalance() attempts to spread the
operations evenly over the cpus, e.g. cpu0 gets copy channel0 and xor
channel0 while cpu1 gets copy channel 1 and xor channel 1.  When a
dependency is specified async_tx_find_channel defaults to keeping the
operation on the same channel.  A xor->copy->xor chain will stay on one
channel if it supports both operation types, otherwise the transaction will
transition between a copy and a xor resource.

Currently the raid5 implementation in the MD raid456 driver has been
converted to the async_tx api.  A driver for the offload engines on the
Intel Xscale series of I/O processors, iop-adma, is provided in a later
commit.  With the iop-adma driver and async_tx, raid456 is able to offload
copy, xor, and xor-zero-sum operations to hardware engines.
 
On iop342 tiobench showed higher throughput for sequential writes (20 - 30%
improvement) and sequential reads to a degraded array (40 - 55%
improvement).  For the other cases performance was roughly equal, +/- a few
percentage points.  On a x86-smp platform the performance of the async_tx
implementation (in synchronous mode) was also +/- a few percentage points
of the original implementation.  According to 'top' on iop342 CPU
utilization drops from ~50% to ~15% during a 'resync' while the speed
according to /proc/mdstat doubles from ~25 MB/s to ~50 MB/s.
 
The tiobench command line used for testing was: tiobench --size 2048
--block 4096 --block 131072 --dir /mnt/raid --numruns 5
* iop342 had 1GB of memory available

Details:
* if CONFIG_DMA_ENGINE=n the asynchronous path is compiled away by making
  async_tx_find_channel a static inline routine that always returns NULL
* when a callback is specified for a given transaction an interrupt will
  fire at operation completion time and the callback will occur in a
  tasklet.  if the the channel does not support interrupts then a live
  polling wait will be performed
* the api is written as a dmaengine client that requests all available
  channels
* In support of dependencies the api implicitly schedules channel-switch
  interrupts.  The interrupt triggers the cleanup tasklet which causes
  pending operations to be scheduled on the next channel
* Xor engines treat an xor destination address differently than a software
  xor routine.  To the software routine the destination address is an implied
  source, whereas engines treat it as a write-only destination.  This patch
  modifies the xor_blocks routine to take a an explicit destination address
  to mirror the hardware.

Changelog:
* fixed a leftover debug print
* don't allow callbacks in async_interrupt_cond
* fixed xor_block changes
* fixed usage of ASYNC_TX_XOR_DROP_DEST
* drop dma mapping methods, suggested by Chris Leech
* printk warning fixups from Andrew Morton
* don't use inline in C files, Adrian Bunk
* select the API when MD is enabled
* BUG_ON xor source counts <= 1
* implicitly handle hardware concerns like channel switching and
  interrupts, Neil Brown
* remove the per operation type list, and distribute operation capabilities
  evenly amongst the available channels
* simplify async_tx_find_channel to optimize the fast path
* introduce the channel_table_initialized flag to prevent early calls to
  the api
* reorganize the code to mimic crypto
* include mm.h as not all archs include it in dma-mapping.h
* make the Kconfig options non-user visible, Adrian Bunk
* move async_tx under crypto since it is meant as 'core' functionality, and
  the two may share algorithms in the future
* move large inline functions into c files
* checkpatch.pl fixes
* gpl v2 only correction

Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-By: NeilBrown <neilb@suse.de>
2007-07-13 08:06:14 -07:00
Dan Williams
685784aaf3 xor: make 'xor_blocks' a library routine for use with async_tx
The async_tx api tries to use a dma engine for an operation, but will fall
back to an optimized software routine otherwise.  Xor support is
implemented using the raid5 xor routines.  For organizational purposes this
routine is moved to a common area.

The following fixes are also made:
* rename xor_block => xor_blocks, suggested by Adrian Bunk
* ensure that xor.o initializes before md.o in the built-in case
* checkpatch.pl fixes
* mark calibrate_xor_blocks __init, Adrian Bunk

Cc: Adrian Bunk <bunk@stusta.de>
Cc: NeilBrown <neilb@suse.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2007-07-13 08:06:14 -07:00
Linus Torvalds
44ce6294d0 Revert "md: improve partition detection in md array"
This reverts commit 5b479c91da.

Quoth Neil Brown:

  "It causes an oops when auto-detecting raid arrays, and it doesn't
   seem easy to fix.

   The array may not be 'open' when do_md_run is called, so
   bdev->bd_disk might be NULL, so bd_set_size can oops.

   This whole approach of opening an md device before it has been
   assembled just seems to get more and more painful.  I think I'm going
   to have to come up with something clever to provide both backward
   comparability with usage expectation, and sane integration into the
   rest of the kernel."

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 18:51:36 -07:00
NeilBrown
5b479c91da md: improve partition detection in md array
md currently uses ->media_changed to make sure rescan_partitions
is call on md array after they are assembled.

However that doesn't happen until the array is opened, which is later
than some people would like.

So use blkdev_ioctl to do the rescan immediately that the
array has been assembled.

This means we can remove all the ->change infrastructure as it was only used
to trigger a partition rescan.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:57 -07:00
NeilBrown
42b9bebe3f md: remove the slash from the name of a kmem_cache used by raid5
SLUB doesn't like slashes as it wants to use the cache name as the name of a
directory (or symlink) in sysfs.

Signed-off-by: Neil Brown <neilb@suse.de>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:57 -07:00
NeilBrown
5e55e2f5fc [PATCH] md: convert compile time warnings into runtime warnings
...  still not sure why we need this ....

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-27 09:05:15 -07:00
NeilBrown
041ae52e26 [PATCH] md: clear the congested_fn when stopping a raid5
If this mddev and queue got reused for another array that doesn't register a
congested_fn, this function would get called incorretly.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-27 09:05:14 -07:00
NeilBrown
3d37890baa [PATCH] md: allow raid4 arrays to be reshaped
All that is missing the the function pointers in raid4_pers.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-27 09:05:14 -07:00
NeilBrown
6d3baf2eb8 [PATCH] md: fix for raid6 reshape
Recent patch for raid6 reshape had a change missing that showed up in
subsequent review.

Many places in the raid5 code used "conf->raid_disks-1" to mean "number of
data disks".  With raid6 that had to be changed to "conf->raid_disk -
conf->max_degraded" or similar.  One place was missed.

This bug means that if a raid6 reshape were aborted in the middle the
recorded position would be wrong.  On restart it would either fail (as the
position wasn't on an appropriate boundary) or would leave a section of the
array unreshaped, causing data corruption.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-05 07:57:53 -08:00
NeilBrown
f416885ef4 [PATCH] md: add support for reshape of a raid6
i.e. one or more drives can be added and the array will re-stripe
while on-line.

Most of the interesting work was already done for raid5.  This just extends it
to raid6.

mdadm newer than 2.6 is needed for complete safety, however any version of
mdadm which support raid5 reshape will do a good enough job in almost all
cases (an 'echo repair > /sys/block/mdX/md/sync_action' is recommended after a
reshape that was aborted and had to be restarted with an such a version of
mdadm).

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01 14:53:36 -08:00
NeilBrown
b4c4c7b809 [PATCH] md: restart a (raid5) reshape that has been aborted due to a read/write error
An error always aborts any resync/recovery/reshape on the understanding that
it will immediately be restarted if that still makes sense.  However a reshape
currently doesn't get restarted.  With this patch it does.

To avoid restarting when it is not possible to do work, we call into the
personality to check that a reshape is ok, and strengthen raid5_check_reshape
to fail if there are too many failed devices.

We also break some code out into a separate function: remove_and_add_spares as
the indent level for that code was getting crazy.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01 14:53:36 -08:00
Neil Brown
387bb17374 [PATCH] md: fix various bugs with aligned reads in RAID5
It is possible for raid5 to be sent a bio that is too big for an underlying
device.  So if it is a READ that we pass stright down to a device, it will
fail and confuse RAID5.

So in 'chunk_aligned_read' we check that the bio fits within the parameters
for the target device and if it doesn't fit, fall back on reading through
the stripe cache and making lots of one-page requests.

Note that this is the earliest time we can check against the device because
earlier we don't have a lock on the device, so it could change underneath
us.

Also, the code for handling a retry through the cache when a read fails has
not been tested and was badly broken.  This patch fixes that code.

Signed-off-by: Neil Brown <neilb@suse.de>
Cc: "Kai" <epimetreus@fastmail.fm>
Cc: <stable@suse.de>
Cc: <org@suse.de>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09 09:25:46 -08:00
NeilBrown
c20086de93 [PATCH] md: remove unnecessary printk when raid5 gets an unaligned read.
raid5_mergeable_bvec tries to ensure that raid5 never sees a read request
that does not fit within just one chunk.  However as we must always accept
a single-page read, that is not always possible.

So when "in_chunk_boundary" fails, it might be unusual, but it is not a
problem and printing a message every time is a bad idea.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-26 13:51:00 -08:00
NeilBrown
2a2275d630 [PATCH] md: fix potential memalloc deadlock in md
If a GFP_KERNEL allocation is attempted in md while the mddev_lock is held,
it is possible for a deadlock to eventuate.

This happens if the array was marked 'clean', and the memalloc triggers a
write-out to the md device.

For the writeout to succeed, the array must be marked 'dirty', and that
requires getting the mddev_lock.

So, before attempting a GFP_KERNEL allocation while holding the lock, make
sure the array is marked 'dirty' (unless it is currently read-only).

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-26 13:51:00 -08:00
NeilBrown
802ba064c4 [PATCH] md: Don't assume that READ==0 and WRITE==1 - use the names explicitly
Thanks Jens for alerting me to this.

Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: <raziebe@gmail.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 09:05:48 -08:00
NeilBrown
c2b00852fb [PATCH] md: return a non-zero error to bi_end_io as appropriate in raid5
Currently raid5 depends on clearing the BIO_UPTODATE flag to signal an error
to higher levels.  While this should be sufficient, it is safer to explicitly
set the error code as well - less room for confusion.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 09:57:21 -08:00
NeilBrown
b8c6b64556 [PATCH] md: remove some old ifdefed-out code from raid5.c
There are some vestiges of old code that was used for bypassing the stripe
cache on reads in raid5.c.  This was never updated after the change from
buffer_heads to bios, but was left as a reminder.

That functionality has nowe been implemented in a completely different way, so
the old code can go.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 09:57:21 -08:00
NeilBrown
b875e531fc [PATCH] md: fix innocuous bug in raid6 stripe_to_pdidx
stripe_to_pdidx finds the index of the parity disk for a given stripe.  It
assumes raid5 in that it uses "disks-1" to determine the number of data disks.

This is incorrect for raid6 but fortunately the two usages cancel each other
out.  The only way that 'data_disks' affects the calculation of pd_idx in
raid5_compute_sector is when it is divided into the sector number.  But as
that sector number is calculated by multiplying in the wrong value of
'data_disks' the division produces the right value.

So it is innocuous but needs to be fixed.

Also change the calculation of raid_disks in compute_blocknr to make it
more obviously correct (it seems at first to always use disks-1 too).

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 09:57:21 -08:00
Raz Ben-Jehuda(caro)
5248861511 [PATCH] md: enable bypassing cache for reads
Call the chunk_aligned_read where appropriate.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 09:57:20 -08:00
Raz Ben-Jehuda(caro)
46031f9a38 [PATCH] md: allow reads that have bypassed the cache to be retried on failure
If a bypass-the-cache read fails, we simply try again through the cache.  If
it fails again it will trigger normal recovery precedures.

update 1:

From: NeilBrown <neilb@suse.de>

1/
  chunk_aligned_read and retry_aligned_read assume that
      data_disks == raid_disks - 1
  which is not true for raid6.
  So when an aligned read request bypasses the cache, we can get the wrong data.

2/ The cloned bio is being used-after-free in raid5_align_endio
   (to test BIO_UPTODATE).

3/ We forgot to add rdev->data_offset when submitting
   a bio for aligned-read

4/ clone_bio calls blk_recount_segments and then we change bi_bdev,
   so we need to invalidate the segment counts.

5/ We don't de-reference the rdev when the read completes.
   This means we need to record the rdev to so it is still
   available in the end_io routine.  Fortunately
   bi_next in the original bio is unused at this point so
   we can stuff it in there.

6/ We leak a cloned bio if the target rdev is not usable.

From: NeilBrown <neilb@suse.de>

update 2:

1/ When aligned requests fail (read error) they need to be retried
   via the normal method (stripe cache).  As we cannot be sure that
   we can process a single read in one go (we may not be able to
   allocate all the stripes needed) we store a bio-being-retried
   and a list of bioes-that-still-need-to-be-retried.
   When find a bio that needs to be retried, we should add it to
   the list, not to single-bio...

2/ We were never incrementing 'scnt' when resubmitting failed
   aligned requests.

[akpm@osdl.org: build fix]
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 09:57:20 -08:00
Raz Ben-Jehuda(caro)
f679623f50 [PATCH] md: handle bypassing the read cache (assuming nothing fails)
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 09:57:20 -08:00
Raz Ben-Jehuda(caro)
23032a0eb9 [PATCH] md: define raid5_mergeable_bvec
This will encourage read request to be on only one device, so we will often be
able to bypass the cache for read requests.

Signed-off-by: Neil Brown <neilb@suse.de>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 09:57:20 -08:00
Christoph Lameter
e18b890bb0 [PATCH] slab: remove kmem_cache_t
Replace all uses of kmem_cache_t with struct kmem_cache.

The patch was generated using the following script:

	#!/bin/sh
	#
	# Replace one string by another in all the kernel sources.
	#

	set -e

	for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do
		quilt add $file
		sed -e "1,\$s/$1/$2/g" $file >/tmp/$$
		mv /tmp/$$ $file
		quilt refresh
	done

The script was run like this

	sh replace kmem_cache_t "struct kmem_cache"

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:25 -08:00
NeilBrown
0692c6b1cf [PATCH] md: fix sizing problem with raid5-reshape and CONFIG_LBD=n
I forgot to has the size-in-blocks to (loff_t) before shifting up to a
size-in-bytes.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-08 18:29:24 -08:00
Eric Sesterhenn
52e5f9d1cf BUG_ON cleanup for drivers/md/
This changes two if() BUG(); usages to BUG_ON(); so people
can disable it safely.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 23:33:23 +02:00
NeilBrown
f022b2fddd [PATCH] md: add a ->congested_fn function for raid5/6
This is very different from other raid levels and all requests go through a
'stripe cache', and it has congestion management already.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:18 -07:00
NeilBrown
c04be0aa82 [PATCH] md: Improve locking around error handling
The error handling routines don't use proper locking, and so two concurrent
errors could trigger a problem.

So:
  - use test-and-set and test-and-clear to synchonise
    the In_sync bits with the ->degraded count
  - use the spinlock to protect updates to the
    degraded count (could use an atomic_t but that
    would be a bigger change in code, and isn't
    really justified)
  - remove un-necessary locking in raid5

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:18 -07:00