Commit graph

4404 commits

Author SHA1 Message Date
Linus Torvalds
c6c5992723 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (32 commits)
  USB: serial: no unnecessary GFP_ATOMIC in oti6858
  USB: serial: fix race between unthrottle and completion handler in visor
  USB: serial: fix assumption that throttle/unthrottle cannot sleep
  USB: serial: fix race between unthrottle and completion handler in symbolserial
  USB: serial: fix race between unthrottle and completion handler in opticon
  USB: ehci: Fix isoc scheduling boundary checking.
  USB: storage: When a device returns no sense data, call it a Hardware Error
  USB: small fix in error case of suspend in generic usbserial code
  USB: visor: fix trivial accounting bug in visor driver
  USB: Fix throttling in generic usbserial driver
  USB: cp210x: Add support for the DW700 UART
  USB: ipaq: fix oops when device is plugged in
  USB: isp1362: fix build warnings on 64-bit systems
  USB: gadget: imx_udc: Use resource size
  USB: storage: iRiver P7 UNUSUAL_DEV patch
  USB: musb: make HAVE_CLK support optional
  USB: xhci: Fix dropping endpoints from the xHC schedule.
  USB: xhci: Don't wait for a disable slot cmd when HC dies.
  USB: xhci: Handle canceled URBs when HC dies.
  USB: xhci: Stop debugging polling loop when HC dies.
  ...
2009-10-11 11:24:25 -07:00
Oliver Neukum
40d2858231 USB: serial: no unnecessary GFP_ATOMIC in oti6858
GFP_ATOMIC without good cause is evil.

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:09 -07:00
Oliver Neukum
a1c33952b7 USB: serial: fix race between unthrottle and completion handler in visor
usb:usbserial:visor: fix race between unthrottle and completion handler

visor_unthrottle() mustn't resubmit the URB unconditionally
as the URB may still be running.

the same bug as opticon.

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:09 -07:00
Oliver Neukum
6383251545 USB: serial: fix assumption that throttle/unthrottle cannot sleep
many serial subdrivers are clearly written as if throttle/unthrottle
cannot sleep. This leads to unneeded atomic submissions. This
patch converts affected drivers in a way to makes very clear that
throttle/unthrottle can sleep. Thus future misdesigns can be avoided
and efficiency and reliability improved.

This removes any such assumption using GFP_KERNEL and spin_lock_irq()

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:09 -07:00
Oliver Neukum
b2a5cf1bdc USB: serial: fix race between unthrottle and completion handler in symbolserial
usb:usbserial:symbolserial: fix race between unthrottle and completion handler

symbol_unthrottle() mustn't resubmit the URB unconditionally
as the URB may still be running.

the same bug as opticon.

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:08 -07:00
Oliver Neukum
88fa6590b3 USB: serial: fix race between unthrottle and completion handler in opticon
usb:usbserial:opticon: fix race between unthrottle and completion handler

opticon_unthrottle() mustn't resubmit the URB unconditionally
as the URB may still be running.

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:08 -07:00
Sarah Sharp
d55500941f USB: ehci: Fix isoc scheduling boundary checking.
The EHCI driver does some bounds checking when it's scheduling an iTD for
an active endpoint.  It sets the local variable start to
stream->next_uframe and moves that variable further in the schedule if
necessary.  However, the driver fails to do anything with start before
jumping to the ready label and setting the URB's starting frame to
stream->next_uframe.  Alan Stern confirms the EHCI driver should set
stream->next_uframe to start before jumping.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:08 -07:00
Alan Stern
f1a0743bc0 USB: storage: When a device returns no sense data, call it a Hardware Error
This patch (as1294) fixes a problem that has plagued users for several
kernel releases.  Some USB mass-storage devices don't return any sense
data when they encounter certain kinds of errors.  The SCSI layer
interprets this to mean that the operation should be retried, and the
same thing happens -- over and over again with no limit.  In some
circumstances (such as when a bus reset occurs) that is the right
thing to do, but not here.

The patch checks for this condition (a transport failure with no sense
data) and changes the result code to DID_ERROR and the sense code to
Hardware Error.  This does get only a limited number of retries, and
so the command will fail relatively quickly instead of getting stuck
in an infinite loop.

This fixes a large part of Bugzilla #14118.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Mantas Mikulenas <grawity@gmail.com>
CC: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:08 -07:00
Oliver Neukum
a5f6005d7b USB: small fix in error case of suspend in generic usbserial code
usb:usbserial: fix flags in error case of suspension

suspended flag must be reset in error case

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:08 -07:00
Oliver Neukum
4c9fde9b86 USB: visor: fix trivial accounting bug in visor driver
usb:usbserial:visor: fix accounting in error case

data not pushed to the tty layer due to an error mustn't be counted

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:08 -07:00
Joris van Rantwijk
63a9609513 USB: Fix throttling in generic usbserial driver
The generic usbserial driver in Linux 2.6.31 halts its receiving
channel in response to throttle requests from the line discipline.
Unfortunately it drops the contents of the first URB received after
throttling takes effect. This patch corrects that problem.

Signed-off-by: Joris van Rantwijk <jorispubl@xs4all.nl>
Acked-by: Johan Hovold <jhovold@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:08 -07:00
Éric Piel
6f88139eb9 USB: cp210x: Add support for the DW700 UART
In the Dell inspiron mini 10, the GPS is connected via a cp2102. This patch
adds detection of this USB device. (I haven't managed to use the GPS under
Linux yet, though)

Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:08 -07:00
Alan Stern
06bad89da6 USB: ipaq: fix oops when device is plugged in
This patch (as1293) fixes a problem with the ipaq serial driver.  It
tries to bind to all the interfaces, even those that don't have enough
endpoints.  The symptom is an invalid memory reference and oops when
the device is plugged in.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: stable <stable@kernel.org>
Tested-by: Matthias Geissert <geissert@mathematik.tu-darmstadt.de>
Tested-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:07 -07:00
Mike Frysinger
b0a9cf297e USB: isp1362: fix build warnings on 64-bit systems
A bunch of places assumed pointers were 32-bits in size (bit checking and
debug output), but none of these affected runtime functionality.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:07 -07:00
Tobias Klauser
d86a83f4ac USB: gadget: imx_udc: Use resource size
Use the resource_size function instead of manually calculating the
resource size. This reduces the chance of introducing off-by-one errors.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:07 -07:00
Sergey Pinaev
2f13612a86 USB: storage: iRiver P7 UNUSUAL_DEV patch
Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:07 -07:00
Mike Frysinger
b20cf90650 USB: musb: make HAVE_CLK support optional
The Blackfin port doesn't support HAVE_CLK and the musb driver works fine
with support stubbed out, so take the existing Blackfin clk stubs and move
them to common musb code so we can drop the Kconfig dependency.

Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:07 -07:00
Sarah Sharp
0a023c6cf1 USB: xhci: Fix dropping endpoints from the xHC schedule.
When an endpoint is to be dropped from the hardware bandwidth schedule, we
want to clear its add flag.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:07 -07:00
Sarah Sharp
c526d0d4fc USB: xhci: Don't wait for a disable slot cmd when HC dies.
When the host controller dies or is removed while a device is plugged in,
the USB core will attempt to deallocate the struct usb_device.  That will
call into xhci_free_dev().  This function used to attempt to submit a
disable slot command to the host controller and clean up the device
structures when that command returned.  Change xhci_free_dev() to skip the
command submission and just free the memory if the host controller died.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:06 -07:00
Sarah Sharp
e34b2fbf28 USB: xhci: Handle canceled URBs when HC dies.
When the host controller dies (e.g. it is removed from a PCI card slot),
the xHCI driver cannot expect commands to complete.  The buggy code this
patch fixes would mark an URB as canceled and then expect the URB to be
completed when the stop endpoint command completed.  That would never
happen if the host controller was dead, so the USB core would just hang in
the disconnect code.

If the host controller died, and the driver asks to cancel an URB, free
any structures associated with that URB and immediately give it back.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:06 -07:00
Sarah Sharp
e4ab05df57 USB: xhci: Stop debugging polling loop when HC dies.
If the host controller card is removed from the system, stop the timer
function to debug the xHCI rings.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:06 -07:00
Gergely Imreh
35f76e897d USB: usbtmc: fix timeout increase
The current 10ms timeout is too short for some normal USBTMC device
operation, increase it to a value which was tested with previously
affected Tektronix oscilloscopes.

Signed-off-by: Gergely Imreh <imrehg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:06 -07:00
Ronnie Furuskog
0ee3a33a04 USB: option: Patch for Huawei Mobile Broadband E270+ Modem
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:06 -07:00
Peter Magdina
75f47214f9 USB: option: Toshiba G450 device id
Signed-off-by: Peter Magdina <peter@magdina.sk>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:06 -07:00
Jiri Slaby
696a4ace98 USB: usblcd, fix memory leak
Stanse found a memory leak in lcd_probe. Instead of returning without
releasing the memory, jump to the error label which frees it.

http://stanse.fi.muni.cz/

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:06 -07:00
Elina Pasheva
0f0ba794dc USB: serial: sierra driver version change to 1.3.8
Updated sierra driver version from 1.3.7 to 1.3.8 now that the autosuspend
capabilities were added to the driver.

Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:06 -07:00
Alan Stern
a4720c650b USB: serial: don't call release without attach
This patch (as1295) fixes a recently-added bug in the USB serial core.
If certain kinds of errors occur during probing, the core may call a
serial driver's release method without previously calling the attach
method.  This causes some drivers (io_ti in particular) to perform an
invalid memory access.

The patch adds a new flag to keep track of whether or not attach has
been called.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf>
CC: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:05 -07:00
Johan Hovold
ba6b702f85 USB: digi_acceleport: Fix broken unthrottle.
This patch fixes a regression introduced in
39892da44b.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Acked-by: Oliver Neukum <oliver@neukum.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:05 -07:00
Johan Hovold
9388e2e71a USB: pl2303: fix error characters not being reported to ldisc
Fix regression introduced by commit
d4fc4a7bfc (tty: Fix the PL2303 private
methods for sysrq).

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:05 -07:00
Johan Hovold
cc01f17d5c USB: ftdi_sio: re-implement read processing
- Re-structure read processing.
 - Kill obsolete work queue and always push to tty in completion handler.
 - Use tty_insert_flip_string instead of per character push when
   possible.
 - Fix stalled-read regression in 2.6.31 by using urb status to
   determine when port is closed rather than port count.
 - Fix race with open/close by checking ASYNCB_INITIALIZED in
   unthrottle.
 - Kill private rx_flag and lock and use throttle flags in
   usb_serial_port instead.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:05 -07:00
Johan Hovold
e63e278b4d USB: ftdi_sio: clean up read completion handler
Remove superfluous error checks in completion handler:

 - No need to check private data and urb pointers as we check urb-status
   before dereferencing priv (which is not freed until urb has been killed
   on close).
 - No need to check tty as it is checked again when processing.
 - No need to check urb->number_of_packets on bulk urb.

Note that both private data and tty are checked again before processing
(possibly from work queue which also is cancelled on close).

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:05 -07:00
Johan Hovold
63b0061246 USB: ftdi_sio: remove unused rx_byte counter
Remove unused rx_byte counter which is never exposed as noted by Alan
Cox.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:05 -07:00
Johan Hovold
0cbd81a9f6 USB: ftdi_sio: remove tty->low_latency
Fixes tty_flip_buffer_push being called from hard interrupt context with
low_latency set.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09 13:52:04 -07:00
Linus Torvalds
1442138372 Merge branch 'sh/for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* 'sh/for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: Don't allocate smaller sized mappings on every iteration
  sh: Try PMB mapping based on physical address, not mapping size
  sh: Plug PMB alloc memory leak
  sh: Sprinkle __uses_jump_to_uncached
  sh: enable sleep state LEDs on Ecovec24
  usb: r8a66597-udc unaligned fifo fix
  sh: mach-ecovec24: Document DS2 switch settings.
  sh: Build fix: export __movmem
  sh: Disable unaligned kernel access printks by default.
  sh: mach-ecovec24: modify 1st MTD area to read only
  sh: mach-ecovec24: Add TouchScreen support
  sh: magicpanelr2 and dreamcast can use the generic I/O base.
  sh: Don't enable interrupts in the page fault path
  sh: Set the default I/O port base to P2SEG.
  sh: Handle ioport_map() cases for >= P1SEG addresses.
2009-10-09 09:34:52 -07:00
Magnus Damm
59c82d12aa usb: r8a66597-udc unaligned fifo fix
Rework the r8a66597-udc fifo code to avoid unaligned accesses.

Without this patch unaligned exceptions will degrade the
USB performance. The exceptions come from the fact that
the usb fifo data buffers may be misaligned.

This patch updates the fifo access code to only use
insl()/outsl() and insw()/outsw() in the case of properly
aligned data buffers. The fallback case is that inl()/inw()
are used for misaligned buffer reads together with outb()
that is used for misaligned buffer writes.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-06 10:59:03 +09:00
Alexey Dobriyan
a99bbaf5ee headers: remove sched.h from poll.h
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-04 15:05:10 -07:00
Alexey Dobriyan
828c09509b const: constify remaining file_operations
[akpm@linux-foundation.org: fix KVM]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01 16:11:11 -07:00
Dave Young
f278a2f7bb tty: Fix regressions caused by commit b50989dc
The following commit made console open fails while booting:

	commit b50989dc44
	Author: Alan Cox <alan@linux.intel.com>
	Date:   Sat Sep 19 13:13:22 2009 -0700

	tty: make the kref destructor occur asynchronously

Due to tty release routines run in a workqueue now, error like the
following will be reported while booting:

INIT open /dev/console Input/output error

It also causes hibernation regression to appear as reported at
http://bugzilla.kernel.org/show_bug.cgi?id=14229

The reason is that now there's latency issue with closing, but when
we open a "closing not finished" tty, -EIO will be returned.

Fix it as per the following Alan's suggestion:

  Fun but it's actually not a bug and the fix is wrong in itself as
  the port may be closing but not yet being destructed, in which case
  it seems to do the wrong thing.  Opening a tty that is closing (and
  could be closing for long periods) is supposed to return -EIO.

  I suspect a better way to deal with this and keep the old console
  timing is to split tty->shutdown into two functions.

  tty->shutdown() - called synchronously just before we dump the tty
  onto the waitqueue for destruction

  tty->cleanup() - called when the destructor runs.

  We would then do the shutdown part which can occur in IRQ context
  fine, before queueing the rest of the release (from tty->magic = 0
  ...  the end) to occur asynchronously

  The USB update in -next would then need a call like

       if (tty->cleanup)
               tty->cleanup(tty);

  at the top of the async function and the USB shutdown to be split
  between shutdown and cleanup as the USB resource cleanup and final
  tidy cannot occur synchronously as it needs to sleep.

  In other words the logic becomes

       final kref put
               make object unfindable

       async
               clean it up

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
[ rjw: Rebased on top of 2.6.31-git, reworked the changelog. ]
Signed-off-by: "Rafael J. Wysocki" <rjw@sisk.pl>
[ Changed serial naming to match new rules, dropped tty_shutdown as per
  comments from Alan Stern  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-27 13:35:16 -07:00
Alexey Dobriyan
f0f37e2f77 const: mark struct vm_struct_operations
* mark struct vm_area_struct::vm_ops as const
* mark vm_ops in AGP code

But leave TTM code alone, something is fishy there with global vm_ops
being used.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-27 11:39:25 -07:00
Alexey Dobriyan
1d1764c398 headers: kref.h redux
* remove asm/atomic.h inclusion from kref.h -- not needed, linux/types.h
  is enough for atomic_t
* remove linux/kref.h inclusion from files which do not need it.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-26 10:17:19 -07:00
Russell King
baea7b946f Merge branch 'origin' into for-linus
Conflicts:
	MAINTAINERS
2009-09-24 21:22:33 +01:00
Linus Torvalds
a6b49cb210 Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (24 commits)
  microblaze: Disable heartbeat/enable emaclite in defconfigs
  microblaze: Support simpleImage.dts make target
  microblaze: Fix _start symbol to physical address
  microblaze: Use LOAD_OFFSET macro to get correct LMA for all sections
  microblaze: Create the LOAD_OFFSET macro used to compute VMA vs LMA offsets
  microblaze: Copy ppc asm-compat.h for clean handling of constants in asm and C
  microblaze: Actually show KiB rather than pages in "Freeing initrd memory:"
  microblaze: Support ptrace syscall tracing.
  microblaze: Updated CPU version and FPGA family codes in PVR
  microblaze: Generate correct signal and siginfo for integer div-by-zero
  microblaze: Don't be noisy when userspace causes hardware exceptions
  microblaze: Remove ipc.h file which points to non-existing asm-generic file
  microblaze: Clear sticky FSR register after generating exception signals
  microblaze: Ensure CPU usermode is set on new userspace processes
  microblaze: Use correct kbuild variable KBUILD_CFLAGS
  microblaze: Save and restore msr in hw exception
  microblaze: Add architectural support for USB EHCI host controllers
  microblaze: Implement include/asm/syscall.h.
  microblaze: Improve checking mechanism for MSR instruction
  microblaze: Add checking mechanism for MSR instruction
  ...
2009-09-24 09:01:44 -07:00
Andrew Morton
cd6045138e drivers/usb/serial/sierra.c: fix CONFIG_PM=n build
drivers/usb/serial/sierra.c: In function 'sierra_suspend':
drivers/usb/serial/sierra.c:936: error: 'struct usb_device' has no member named 'auto_pm'

Repairs

commit e6929a9020
Author: Oliver Neukum <oliver@neukum.org>
Date:   Fri Sep 4 23:19:53 2009 +0200

    USB: support for autosuspend in sierra while online

Cc: Greg KH <greg@kroah.com>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Elina Pasheva <epasheva@sierrawireless.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 07:21:06 -07:00
Alexey Dobriyan
2bcd57ab61 headers: utsname.h redux
* remove asm/atomic.h inclusion from linux/utsname.h --
   not needed after kref conversion
 * remove linux/utsname.h inclusion from files which do not need it

NOTE: it looks like fs/binfmt_elf.c do not need utsname.h, however
due to some personality stuff it _is_ needed -- cowardly leave ELF-related
headers and files alone.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 18:13:10 -07:00
Greg Kroah-Hartman
3ae9da1c99 USB: skeleton: fix coding style issues.
This fixes up the majority of the coding style issues in the
usb-skeleton driver.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23 06:46:40 -07:00
Oliver Neukum
8cd0166434 USB: O_NONBLOCK in read path of skeleton
Non blocking IO is supported in the read path of usb-skeleton.
This is done by just not blocking. As support for handling signals
without stopping IO is already there, it can be used for O_NONBLOCK, too.

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23 06:46:40 -07:00
Oliver Neukum
7981998673 USB: make usb-skeleton honor O_NONBLOCK in write path
usb:usb-skeleton: honor O_NONBLOCK in write path

nonblocking writes are allowed by using down_trylock if necessary
to reserve an URB

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23 06:46:40 -07:00
Oliver Neukum
e7389cc9a7 USB: skel_read really sucks royally
The read code path of the skeleton driver really sucks

 - skel_read works only for devices which always send data
 - the timeout comes out of thin air
 - it blocks signals for the duration of the timeout
 - it disallows nonblocking IO by design

This patch fixes it by using a real urb, a completion and interruptible waits.

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23 06:46:40 -07:00
Sarah Sharp
b356b7c769 USB: Add hub descriptor update hook for xHCI
Add a hook for updating xHCI internal structures after khubd fetches the
hub descriptor and sets up the hub's TT information.  The xHCI driver must
update the internal structures before devices under the hub can be
enumerated.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23 06:46:40 -07:00
Sarah Sharp
ac1c1b7f16 USB: xhci: Support USB hubs.
For a USB hub to work under an xHCI host controller, the xHC's internal
scheduler must be made aware of the hub's characteristics.  Add an xHCI
hook that the USB core will call after it fetches the hub descriptor.
This hook will add hub information to the slot context for that device,
including whether it has multiple TTs or a single TT, the number of ports
on the hub, and TT think time.

Setting up the slot context for the device is different for 0.95 and 0.96
xHCI host controllers.

Some of the slot context reserved fields in the 0.95 specification were
changed into hub fields in the 0.96 specification.  Don't set the TT think
time or number of ports for a hub if we're dealing with a 0.95-compliant
xHCI host controller.

The 0.95 xHCI specification says that to modify the hub flag, we need to
issue an evaluate context command.  The 0.96 specification says that flag
can be set with a configure endpoint command.  Issue the correct command
based on the version reported by the hardware.

This patch does not add support for multi-TT hubs.  Multi-TT hubs expose
a single TT on alt setting 0, and multi-TT on alt setting 1.  The xHCI
driver can't handle setting alternate interfaces yet.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23 06:46:40 -07:00