Commit graph

1264 commits

Author SHA1 Message Date
Paul Gortmaker
82ea267f7d mfd: Fix modular builds of rc5t583 regulator support
The combination of commit 1b1247dd75

    "mfd: Add support for RICOH PMIC RC5T583"

and commit 6ffc327021

    "regulator: Add support for RICOH PMIC RC5T583 regulator"

are causing the i386 allmodconfig builds to fail with this:

  ERROR: "rc5t583_update" [drivers/regulator/rc5t583-regulator.ko] undefined!
  ERROR: "rc5t583_set_bits" [drivers/regulator/rc5t583-regulator.ko] undefined!
  ERROR: "rc5t583_clear_bits" [drivers/regulator/rc5t583-regulator.ko] undefined!
  ERROR: "rc5t583_read" [drivers/regulator/rc5t583-regulator.ko] undefined!

and this:

  ERROR: "rc5t583_ext_power_req_config" [drivers/regulator/rc5t583-regulator.ko] undefined!

For the 1st four, make the simple ops static inline, instead of
polluting the namespace with trivial exports.  For the last one,
add an EXPORT_SYMBOL.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-04-16 21:27:07 +02:00
Dmitry Artamonow
02269ab10f mfd: Fix asic3_gpio_to_irq
Assumption that irq numbers of asic3 gpios start at
IRQ_BOARD_START is certainly wrong - driver may as well
use any other base for its irqs (consider for example
the imaginary case of two ASIC3 chips onboard)

Furthermore, some platforms even don't have IRQ_BOARD_START
defined, so driver will fail to build on them:
-------------------------------------------------------
drivers/mfd/asic3.c: In function 'asic3_gpio_to_irq':
drivers/mfd/asic3.c:530: error: 'IRQ_BOARD_START' undeclared (first use in this function)
drivers/mfd/asic3.c:530: error: (Each undeclared identifier is reported only once
drivers/mfd/asic3.c:530: error: for each function it appears in.)
-------------------------------------------------------

Fix it by using irq_base from driver data.

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-04-16 18:57:26 +02:00
Keshava Munegowda
1fcb57d0f6 ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue
It is observed that the echi ports of 3430 sdp board
are not working due to the random timing of programming
the associated GPIOs of the ULPI PHYs of the EHCI for reset.
If the PHYs are reset at during usbhs core driver, host ports will
not work because EHCI driver is loaded after the resetting PHYs.
The PHYs should be in reset state while initializing the EHCI
controller.
The code which does the GPIO pins associated with the PHYs
are programmed to reset is moved from the USB host core driver
to EHCI driver.

Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>
Reviewed-by: Partha Basak <parthab@india.ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Tested-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-04-16 18:47:00 +02:00
Peter Ujfalusi
8eaeb93933 mfd: Convert twl6040 to i2c driver, and separate it from twl core
Complete the separation of the twl6040 from the twl core since
it is a separate chip, not part of the twl6030 PMIC.

Make the needed Kconfig changes for the depending drivers at the
same time to avoid breaking the kernel build (vibra, ASoC components).

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonicro.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-04-16 16:45:34 +02:00
Mark Brown
1e45860f54 ARM: 7366/3: amba: Remove AMBA level regulator support
The AMBA bus regulator support is being used to model on/off switches
for power domains which isn't terribly idiomatic for modern kernels with
the generic power domain code and creates integration problems on platforms
which don't use regulators for their power domains as it's hard to tell
the difference between a regulator that is needed but failed to be provided
and one that isn't supposed to be there (though DT does make that easier).

Platforms that wish to use the regulator API to manage their power domains
can indirect via the power domain interface.

This feature is only used with the vape supply of the db8500 PRCMU
driver which supplies the UARTs and MMC controllers, none of which have
support for managing vcore at runtime in mainline (only pl022 SPI
controller does).  Update that supply to have an always_on constraint
until the power domain support for the system is updated so that it is
enabled for these users, this is likely to have no impact on practical
systems as probably at least one of these devices will be active and
cause AMBA to hold the supply on anyway.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-13 14:04:08 +01:00
Linus Torvalds
5d32c88f0b Merge branch 'akpm' (Andrew's patch-bomb)
Merge batch of fixes from Andrew Morton:
 "The simple_open() cleanup was held back while I wanted for laggards to
  merge things.

  I still need to send a few checkpoint/restore patches.  I've been
  wobbly about merging them because I'm wobbly about the overall
  prospects for success of the project.  But after speaking with Pavel
  at the LSF conference, it sounds like they're further toward
  completion than I feared - apparently davem is at the "has stopped
  complaining" stage regarding the net changes.  So I need to go back
  and re-review those patchs and their (lengthy) discussion."

* emailed from Andrew Morton <akpm@linux-foundation.org>: (16 patches)
  memcg swap: use mem_cgroup_uncharge_swap fix
  backlight: add driver for DA9052/53 PMIC v1
  C6X: use set_current_blocked() and block_sigmask()
  MAINTAINERS: add entry for sparse checker
  MAINTAINERS: fix REMOTEPROC F: typo
  alpha: use set_current_blocked() and block_sigmask()
  simple_open: automatically convert to simple_open()
  scripts/coccinelle/api/simple_open.cocci: semantic patch for simple_open()
  libfs: add simple_open()
  hugetlbfs: remove unregister_filesystem() when initializing module
  drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callback
  fs/xattr.c:setxattr(): improve handling of allocation failures
  fs/xattr.c:listxattr(): fall back to vmalloc() if kmalloc() failed
  fs/xattr.c: suppress page allocation failure warnings from sys_listxattr()
  sysrq: use SEND_SIG_FORCED instead of force_sig()
  proc: fix mount -t proc -o AAA
2012-04-05 15:30:34 -07:00
Stephen Boyd
234e340582 simple_open: automatically convert to simple_open()
Many users of debugfs copy the implementation of default_open() when
they want to support a custom read/write function op.  This leads to a
proliferation of the default_open() implementation across the entire
tree.

Now that the common implementation has been consolidated into libfs we
can replace all the users of this function with simple_open().

This replacement was done with the following semantic patch:

<smpl>
@ open @
identifier open_f != simple_open;
identifier i, f;
@@
-int open_f(struct inode *i, struct file *f)
-{
(
-if (i->i_private)
-f->private_data = i->i_private;
|
-f->private_data = i->i_private;
)
-return 0;
-}

@ has_open depends on open @
identifier fops;
identifier open.open_f;
@@
struct file_operations fops = {
...
-.open = open_f,
+.open = simple_open,
...
};
</smpl>

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-05 15:25:50 -07:00
Linus Torvalds
0195c00244 Disintegrate and delete asm/system.h
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAT3NKzROxKuMESys7AQKElw/+JyDxJSlj+g+nymkx8IVVuU8CsEwNLgRk
 8KEnRfLhGtkXFLSJYWO6jzGo16F8Uqli1PdMFte/wagSv0285/HZaKlkkBVHdJ/m
 u40oSjgT013bBh6MQ0Oaf8pFezFUiQB5zPOA9QGaLVGDLXCmgqUgd7exaD5wRIwB
 ZmyItjZeAVnDfk1R+ZiNYytHAi8A5wSB+eFDCIQYgyulA1Igd1UnRtx+dRKbvc/m
 rWQ6KWbZHIdvP1ksd8wHHkrlUD2pEeJ8glJLsZUhMm/5oMf/8RmOCvmo8rvE/qwl
 eDQ1h4cGYlfjobxXZMHqAN9m7Jg2bI946HZjdb7/7oCeO6VW3FwPZ/Ic75p+wp45
 HXJTItufERYk6QxShiOKvA+QexnYwY0IT5oRP4DrhdVB/X9cl2MoaZHC+RbYLQy+
 /5VNZKi38iK4F9AbFamS7kd0i5QszA/ZzEzKZ6VMuOp3W/fagpn4ZJT1LIA3m4A9
 Q0cj24mqeyCfjysu0TMbPtaN+Yjeu1o1OFRvM8XffbZsp5bNzuTDEvviJ2NXw4vK
 4qUHulhYSEWcu9YgAZXvEWDEM78FXCkg2v/CrZXH5tyc95kUkMPcgG+QZBB5wElR
 FaOKpiC/BuNIGEf02IZQ4nfDxE90QwnDeoYeV+FvNj9UEOopJ5z5bMPoTHxm4cCD
 NypQthI85pc=
 =G9mT
 -----END PGP SIGNATURE-----

Merge tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system

Pull "Disintegrate and delete asm/system.h" from David Howells:
 "Here are a bunch of patches to disintegrate asm/system.h into a set of
  separate bits to relieve the problem of circular inclusion
  dependencies.

  I've built all the working defconfigs from all the arches that I can
  and made sure that they don't break.

  The reason for these patches is that I recently encountered a circular
  dependency problem that came about when I produced some patches to
  optimise get_order() by rewriting it to use ilog2().

  This uses bitops - and on the SH arch asm/bitops.h drags in
  asm-generic/get_order.h by a circuituous route involving asm/system.h.

  The main difficulty seems to be asm/system.h.  It holds a number of
  low level bits with no/few dependencies that are commonly used (eg.
  memory barriers) and a number of bits with more dependencies that
  aren't used in many places (eg.  switch_to()).

  These patches break asm/system.h up into the following core pieces:

    (1) asm/barrier.h

        Move memory barriers here.  This already done for MIPS and Alpha.

    (2) asm/switch_to.h

        Move switch_to() and related stuff here.

    (3) asm/exec.h

        Move arch_align_stack() here.  Other process execution related bits
        could perhaps go here from asm/processor.h.

    (4) asm/cmpxchg.h

        Move xchg() and cmpxchg() here as they're full word atomic ops and
        frequently used by atomic_xchg() and atomic_cmpxchg().

    (5) asm/bug.h

        Move die() and related bits.

    (6) asm/auxvec.h

        Move AT_VECTOR_SIZE_ARCH here.

  Other arch headers are created as needed on a per-arch basis."

Fixed up some conflicts from other header file cleanups and moving code
around that has happened in the meantime, so David's testing is somewhat
weakened by that.  We'll find out anything that got broken and fix it..

* tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits)
  Delete all instances of asm/system.h
  Remove all #inclusions of asm/system.h
  Add #includes needed to permit the removal of asm/system.h
  Move all declarations of free_initmem() to linux/mm.h
  Disintegrate asm/system.h for OpenRISC
  Split arch_align_stack() out from asm-generic/system.h
  Split the switch_to() wrapper out of asm-generic/system.h
  Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h
  Create asm-generic/barrier.h
  Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h
  Disintegrate asm/system.h for Xtensa
  Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt]
  Disintegrate asm/system.h for Tile
  Disintegrate asm/system.h for Sparc
  Disintegrate asm/system.h for SH
  Disintegrate asm/system.h for Score
  Disintegrate asm/system.h for S390
  Disintegrate asm/system.h for PowerPC
  Disintegrate asm/system.h for PA-RISC
  Disintegrate asm/system.h for MN10300
  ...
2012-03-28 15:58:21 -07:00
Linus Torvalds
30304e5a79 MFD changes for 3.4
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPcXgCAAoJEIqAPN1PVmxKh2oP/2Ns+dr4oOF8z+uqYG1oisJd
 CxBTC1Bi9gYBtpiMztPiHZWiQtVXoDgLbLkx6ooWH5dpwCdvU6TVBZUJp4wpELtx
 mMk5vJy4/INHgI0nk5wUOr76rNlQfIcK04f+LHBSG1iljUkoVR3FefVKgoyIP+Wv
 oiCeuCyQcYIUmG1pVt1x43OoS+2xgjWQA67AalLLRj1DOA5OkvUL7NGsrZ1iZTUh
 YHQJsK6ER3MgbFFEImtn10NNFwAEG04o6vi42DFW1O0awm6kmVoLjo46wS+UiKoh
 Vx8t5ZGvlYOZ1ZM9N5ETgQnihBt7cOhA3ivZar8h+WiYVTRJs1ZSkpmnlpmM4YY9
 RCZ5DRw3N39R0ezkNVGSr1Xn1vkysIiZI82frrJiPUYLKihsrBzj2Jq3O25iILCf
 Iyv7HBEJxAb3x0zlF6kPhaA8OW4dssaHTLNx5IJSOKwiwVLdm4RPyOHh9QVz++p/
 p0hvSQWK1MUruBbBrjF/FN+FidgK2iU0iDW/GoDwI7OKymSxg7sauLtp0cZpo6nT
 F+Ep6yl/uR5vxih4LSYFJOjoeKuwIo/x92H0qJ3UroaUs9DNJ7UCKchXXiQ1Wtnz
 tAAsWP1YsMxMzlMxqW5J9w4LJynJ8bqrC0L8+HWzIUwikA8wv8/47Pmc/vPW0Y3N
 5L7KMS8/iFCsS8rPmGeP
 =onDl
 -----END PGP SIGNATURE-----

Merge tag 'mfd_3.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

Pull MFD changes from Samuel Ortiz:
 - 4 new drivers: Freescale i.MX on-chip Anatop, Ricoh's RC5T583 and
   TI's TPS65090 and TPS65217.
 - New variants support (8420, 8520 ab9540), cleanups and bug fixes for
   the abx500 and db8500 ST-E chipsets.
 - Some minor fixes and update for the wm8994 from Mark.
 - The beginning of a long term TWL cleanup effort coming from the TI
   folks.
 - Various fixes and cleanups for the s5m, TPS659xx, pm860x, and MAX8997
   drivers.

Fix up trivial conflicts due to duplicate patches and header file
cleanups (<linux/device.h> removal etc).

* tag 'mfd_3.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (97 commits)
  gpio/twl: Add DT support to gpio-twl4030 driver
  gpio/twl: Allocate irq_desc dynamically for SPARSE_IRQ support
  mfd: Detach twl6040 from the pmic mfd driver
  mfd: Replace twl-* pr_ macros by the dev_ equivalent and do various cleanups
  mfd: Micro-optimization on twl4030 IRQ handler
  mfd: Make twl4030 SIH SPARSE_IRQ capable
  mfd: Move twl-core IRQ allocation into twl[4030|6030]-irq files
  mfd: Remove references already defineid in header file from twl-core
  mfd: Remove unneeded header from twl-core
  mfd: Make twl-core not depend on pdata->irq_base/end
  ARM: OMAP2+: board-omap4-*: Do not use anymore TWL6030_IRQ_BASE in board files
  mfd: Return twl6030_mmc_card_detect IRQ for board setup
  Revert "mfd: Add platform data for MAX8997 haptic driver"
  mfd: Add support for TPS65090
  mfd: Add some da9052-i2c section annotations
  mfd: Build rtc5t583 only if I2C config is selected to y.
  mfd: Add anatop mfd driver
  mfd: Fix compilation error in tps65910.h
  mfd: Add 8420 variant to db8500-prcmu
  mfd: Add 8520 PRCMU variant to db8500-prcmu
  ...
2012-03-28 13:56:35 -07:00
David Howells
9ffc93f203 Remove all #inclusions of asm/system.h
Remove all #inclusions of asm/system.h preparatory to splitting and killing
it.  Performed with the following command:

perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *`

Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-28 18:30:03 +01:00
Linus Torvalds
9e4db1c3ee Merge branch 'platforms' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM platform updates from Russell King:
 "This covers platform stuff for platforms I have a direct interest in
  (iow, I have the hardware).  Essentially:
   - as we no longer support any other Acorn platforms other than RiscPC
     anymore, we can collect all that code into mach-rpc.
   - convert Acorn expansion card stuff to use IRQ allocation functions,
     and get rid of NO_IRQ from there.
   - cleanups to the ebsa110 platform to move some private stuff out of
     its header files.
   - large amount of SA11x0 updates:
   - conversion of private DMA implementation to DMA engine support
     (this actually gives us greater flexibility in drivers over the old
     API.)
   - re-worked ucb1x00 updates - convert to genirq, remove sa11x0
     dependencies, fix various minor issues
   - move platform specific sa11x0 framebuffer data into platform files
     in arch/arm instead of keeping this in the driver itself
   - update sa11x0 IrDA driver for DMA engine, and allow it to use DMA
     for SIR transmissions as well as FIR
   - rework sa1111 support for genirq, and irq allocation
   - fix sa1111 IRQ support so it works again
   - use sparse IRQ support

  After this, I have one more pull request remaining from my current
  set, which I think is going to be the most problematical as it
  generates 8 conflicts."

Fixed up the trivial conflict in arch/arm/mach-rpc/Makefile as per
Russell.

* 'platforms' of git://git.linaro.org/people/rmk/linux-arm: (125 commits)
  ARM: 7343/1: sa11x0: convert to sparse IRQ
  ARM: 7342/2: sa1100: prepare for sparse irq conversion
  ARM: 7341/1: input: prepare jornada720 keyboard and ts for sa11x0 sparse irq
  ARM: 7340/1: rtc: sa1100: include mach/irqs.h instead of asm/irq.h
  ARM: sa11x0: remove unused DMA controller definitions
  ARM: sa11x0: remove old SoC private DMA driver
  USB: sa1111: add hcd .reset method
  USB: sa1111: add OHCI shutdown methods
  USB: sa1111: reorganize ohci-sa1111.c
  USB: sa1111: get rid of nasty printk(KERN_DEBUG "%s: ...", __FILE__)
  USB: sa1111: sparse and checkpatch cleanups
  ARM: sa11x0: don't static map sa1111
  ARM: sa1111: use dev_err() rather than printk()
  ARM: sa1111: cleanup sub-device registration and unregistration
  ARM: sa1111: only setup DMA for DMA capable devices
  ARM: sa1111: register sa1111 devices with dmabounce in bus notifier
  ARM: sa1111: move USB interface register definitions to ohci-sa1111.c
  ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.c
  ARM: sa1111: move PS/2 interface register definitions to sa1111p2.c
  ARM: sa1111: delete unused physical GPIO register definitions
  ...
2012-03-27 18:17:02 -07:00
Russell King
7256ecc2b7 Merge branch 'sa11x0-mcp' into sa11x0
Conflicts:
	arch/arm/mach-sa1100/assabet.c
	arch/arm/mach-sa1100/collie.c
	arch/arm/mach-sa1100/generic.c
	arch/arm/mach-sa1100/lart.c
	arch/arm/mach-sa1100/shannon.c
2012-03-25 23:57:10 +01:00
Linus Torvalds
250f6715a4 The following text was taken from the original review request:
"[RFC PATCH 0/2] audit of linux/device.h users in include/*"
 		https://lkml.org/lkml/2012/3/4/159
 --
 
 Nearly every subsystem has some kind of header with a proto like:
 
 	void foo(struct device *dev);
 
 and yet there is no reason for most of these guys to care about the
 sub fields within the device struct.  This allows us to significantly
 reduce the scope of headers including headers.  For this instance, a
 reduction of about 40% is achieved by replacing the include with the
 simple fact that the device is some kind of a struct.
 
 Unlike the much larger module.h cleanup, this one is simply two
 commits.  One to fix the implicit <linux/device.h> users, and then
 one to delete the device.h includes from the linux/include/ dir
 wherever possible.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPbNxLAAoJEOvOhAQsB9HWR6QQAMRUZ94O2069/nW9h4TO/xTr
 Hq/80lo/TBBiRmob3iWBP76lzgeeMPPVEX1I6N7YYlhL3IL7HsaJH1DvpIPPHXQP
 GFKcBsZ5ZLV8c4CBDSr+/HFNdhXc0bw0awBjBvR7gAsWuZpNFn4WbhizJi4vWAoE
 4ydhPu55G1G8TkBtYLJQ8xavxsmiNBSDhd2i+0vn6EVpgmXynjOMG8qXyaS97Jvg
 pZLwnN5Wu21coj6+xH3QUKCl1mJ+KGyamWX5gFBVIfsDB3k5H4neijVm7t1en4b0
 cWxmXeR/JE3VLEl/17yN2dodD8qw1QzmTWzz1vmwJl2zK+rRRAByBrL0DP7QCwCZ
 ppeJbdhkMBwqjtknwrmMwsuAzUdJd79GXA+6Vm+xSEkr6FEPK1M0kGbvaqV9Usgd
 ohMewewbO6ddgR9eF7Kw2FAwo0hwkPNEplXIym9rZzFG1h+T0STGSHvkn7LV765E
 ul1FapSV3GCxEVRwWTwD28FLU2+0zlkOZ5sxXwNPTT96cNmW+R7TGuslZKNaMNjX
 q7eBZxo8DtVt/jqJTntR8bs8052c8g1Ac1IKmlW8VSmFwT1M6VBGRn1/JWAhuUgv
 dBK/FF+I1GJTAJWIhaFcKXLHvmV9uhS6JaIhLMDOetoOkpqSptJ42hDG+89WkFRk
 o55GQ5TFdoOpqxVzGbvE
 =3j4+
 -----END PGP SIGNATURE-----

Merge tag 'device-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

Pull <linux/device.h> avoidance patches from Paul Gortmaker:
 "Nearly every subsystem has some kind of header with a proto like:

	void foo(struct device *dev);

  and yet there is no reason for most of these guys to care about the
  sub fields within the device struct.  This allows us to significantly
  reduce the scope of headers including headers.  For this instance, a
  reduction of about 40% is achieved by replacing the include with the
  simple fact that the device is some kind of a struct.

  Unlike the much larger module.h cleanup, this one is simply two
  commits.  One to fix the implicit <linux/device.h> users, and then one
  to delete the device.h includes from the linux/include/ dir wherever
  possible."

* tag 'device-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  device.h: audit and cleanup users in main include dir
  device.h: cleanup users outside of linux/include (C files)
2012-03-24 10:41:37 -07:00
Linus Torvalds
9586c959bf Things are really quieting down with the regmap API, while we're still
seeing a trickle of new features coming in they're getting much smaller
 than they were.  It's also nice to have some features which support
 other subsystems building infrastructure on top of regmap.  Highlights
 include:
 
 - Support for padding between the register and the value when
   interacting with the device, sometimes needed for fast interfaces.
 - Support for applying register updates to the device when restoring the
   register state.  This is intended to be used to apply updates supplied by
   manufacturers for tuning the performance of the device (many of which
   are to undocumented registers which aren't otherwise covered).
 - Support for multi-register operations on cached registers.
 - Support for syncing only part of the register cache.
 - Stubs and parameter query functions intended to make it easier for other
   subsystems to build infrastructure on top of the regmap API.
 
 plus a few driver updates making use of the new features which it was
 easier to merge via this tree.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPYJuOAAoJEBus8iNuMP3dauMP/1mYgILz0lpRHjGmUF86vQre
 AcualwUE4UY/WacyUkke72kxa9jcznwzbFjKKNSvL3rLnNy+QPY8Z9v6zBDL90or
 D9Ok8nRVRldIIDlDE708b10AP9sDSB25ra9IVVPzOEX/0NKoE+Y7ZkXcn0s3zGgI
 Y+bLwd1uufFopMpV3m5gXipi1/+PEK+jO7q6vgdUp3C1TcMzOqSyCg+uuHWffHGp
 iO/1XzdxNGx9BTDO/XDEqxUMRnjsQg/VS9JN3CMz8gXwxXD3zrWB/9+SMIfDb5Iy
 /iXqc58uJ6PTY87t5q9TEGyRKo0Xj7NEPnW4isXg/3r0UUb8kls3frXKigtLEUb7
 wnwQD/GCRvXOTbC6TUkFDiZ3OX1qLmnk8YMQ6xhQlbNGM7jJfzj/fFiwBdre58BC
 iKPdF9gfL/gyH5yefySau/YeYqJUbVLzdOAfYVDkjApmQJv67CrPPd96xAsEsTFU
 YojkF9NcapBnk6Vs4adzjxD1YCTThaXnFtUSu/bBNZu1xNFD12TORl5fs0OedUe8
 zvPMZEEKrE5CxHhQNB6j2Z0zajNOgsh183mNSr2VJK1vI4o4pY7MBENYYPzFiPB4
 BfX8KFftxu8O50OVZnweZ80LKVZ9fAo57oWlgR8lfaEbetjY0WdRYOyDT8w5jrtW
 nU+mtlQLc5SmugTs+CiD
 =4Eo9
 -----END PGP SIGNATURE-----

Merge tag 'regmap-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Pull regmap updates from Mark Brown:
 "Things are really quieting down with the regmap API, while we're still
  seeing a trickle of new features coming in they're getting much
  smaller than they were.  It's also nice to have some features which
  support other subsystems building infrastructure on top of regmap.
  Highlights include:

  - Support for padding between the register and the value when
    interacting with the device, sometimes needed for fast interfaces.
  - Support for applying register updates to the device when restoring
    the register state.  This is intended to be used to apply updates
    supplied by manufacturers for tuning the performance of the device
    (many of which are to undocumented registers which aren't otherwise
    covered).
  - Support for multi-register operations on cached registers.
  - Support for syncing only part of the register cache.
  - Stubs and parameter query functions intended to make it easier for
    other subsystems to build infrastructure on top of the regmap API.

  plus a few driver updates making use of the new features which it was
  easier to merge via this tree."

* tag 'regmap-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (41 commits)
  regmap: Fix future missing prototype of devres_alloc() and friends
  regmap: Rejig struct declarations for stubbed API
  regmap: Fix rbtree block base in sync
  regcache: Make sure we sync register 0 in an rbtree cache
  regmap: delete unused module.h from drivers/base/regmap files
  regmap: Add stub for regcache_sync_region()
  mfd: Improve performance of later WM1811 revisions
  regmap: Fix x86_64 breakage
  regmap: Allow drivers to sync only part of the register cache
  regmap: Supply ranges to the sync operations
  regmap: Add tracepoints for cache only and cache bypass
  regmap: Mark the cache as clean after a successful sync
  regmap: Remove default cache sync implementation
  regmap: Skip hardware defaults for LZO caches
  regmap: Expose the driver name in debugfs
  mfd: wm8400: Convert to devm_regmap_init_i2c()
  mfd: wm831x: Convert to devm_regmap_init()
  mfd: wm8994: Convert to devm_regmap_init()
  mfd/ASoC: Convert WM8994 driver to use regmap patches
  mfd: Add __devinit and __devexit annotations in wm8994
  ...
2012-03-22 20:33:14 -07:00
Peter Ujfalusi
364cedb2f9 mfd: Detach twl6040 from the pmic mfd driver
On OMAP4 platform audio has separate IC, it is no longer part
of the pmic chip.
Prevent twl-core to claim the 0x4b address, which belongs to
the twl6040 audio IC.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-22 13:05:49 +01:00
Benoit Cousson
ec1a07b344 mfd: Replace twl-* pr_ macros by the dev_ equivalent and do various cleanups
Since a structure device is available now, use the dev_ macros instead
of the pr_ ones.

Clean some badly formatted comments.
Remove some unused variables.
Move some variable to the place they belong.
Clean some badly wrapped lines.
Align variable definition
Add missing braces in if-then-else block.
Add blank line for better readability.
Move stuff here and there...

Conflicts:

	drivers/mfd/twl-core.c

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-22 13:05:34 +01:00
Felipe Balbi
5a903090e7 mfd: Micro-optimization on twl4030 IRQ handler
__ffs() will be far faster than the for loop used.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-22 13:05:11 +01:00
Benoit Cousson
f01b1f90bf mfd: Make twl4030 SIH SPARSE_IRQ capable
twl4030 is using a two level irq controllers infrastruture.
So far, only the first level was using dynamic irq_desc allocation
to be able to have irq_domain support for device tree.
There is a need to allocate separate irq_descs for the SIH too to
avoid hacking the first level with interrupts from the second level.

Add an irq_base parameter to allow the caller to provide the base from
pdata or from dynamic allocation.

Affect TWL4030_NR_IRQS to the twl-core IRQs only.

Moreover that will allow the extraction of the of_node pointer for further
Device Tree conversion.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-22 13:04:54 +01:00
Benoit Cousson
78518ffa08 mfd: Move twl-core IRQ allocation into twl[4030|6030]-irq files
During DT adaptation, the irq_alloc_desc was added into twl-core, but
due to the rather different and weird IRQ management required by the twl4030,
it is much better to have a different approach for it.
The issue is that twl4030 uses a two level IRQ mechanism but handles all the
PWR interrupts as part of the twl-core interrupt range. It ends up with a
range of 16 interrupts total for CORE and PWR.

The other twl4030 functionalities already have a dedicated driver and thus
their IRQs and irqdomain can and should be defined localy.

twl6030 is using a single level IRQ controller and thus does not require any
trick.

Move the irq_alloc_desc and irq_domain_add_legacy in twl4030-irq and
twl6030-irq.

Allocate together CORE and PWR IRQs for twl4030-irq.

Conflicts:

        drivers/mfd/twl-core.c

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-22 13:04:33 +01:00
Benoit Cousson
1b8f333ff4 mfd: Remove references already defineid in header file from twl-core
The twl-core exported functions are already declared in twl-core.h

Include the header file instead or re-declaring the functions.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-22 13:04:19 +01:00
Felipe Balbi
5fd32d6a3a mfd: Remove unneeded header from twl-core
This driver doesn't really need <plat/cpu.h>, so remove it.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-22 13:03:34 +01:00
Felipe Balbi
9e17862027 mfd: Make twl-core not depend on pdata->irq_base/end
With sparse IRQs the driver shouldn't depend at all on
any IRQ values coming from board-file.

Remove every occurences of pdata->irq_base/end.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-22 13:03:17 +01:00
Benoit Cousson
bdd61bc667 mfd: Return twl6030_mmc_card_detect IRQ for board setup
Card detect IRQ from the TWL6030 used to be provided to the MMC
controller code using a statically allocated IRQ scheme:

  card_detect_irq = TWL6030_IRQ_BASE + MMCDETECT_INTR_OFFSET;

This is no longer valid in a SPARSE_IRQ context since there is no more
pre-defined TWL6030_IRQ_BASE.

Return the proper card detect IRQ value in the twl6030_mmc_card_detect_config
that will be called from the MMC controller.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-22 13:02:48 +01:00
Linus Torvalds
d15d76448b regulator: Updates for 3.4
This has been a fairly quiet release from a regulator point of view, the
 only real framework features added were devm support and a convenience
 helper for setting up fixed voltage regulators.
 
 We also added a couple of drivers (but will drop the BQ240022 driver via
 the arm-soc tree as it's been replaced by the more generic
 gpio-regulator driver) and Axel Lin continued his relentless and
 generally awesome stream of fixes and cleanups.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPZ2paAAoJEBus8iNuMP3d4EIP/3bUD9zVwwC5/+aedwtSoKGC
 eJXqdkJFYkEqLaeU5eobT79NFwzB/7JjVw7CMc/Z+9pXGwqSdA0T/k4j0EaTZWdo
 SMqPfXA2Ia7c67pixdZ32GcYuT53iiBj9ecWozM8LaOyQz0oif127e1OF6LGtQzC
 aWofP58MKrzDc+hmLixswgQVBKR5EDHna9XX7KnEL5ZdfRoyFsKkj752MJD1O6QN
 79+7G0D9uKYsTf5IamYdG9x/kKRvtRlFAXsb7oNY9Z25PydXnkys0SED6isgr7rr
 zgP+Q644fM09H68QgHuuJfsbDSrc0PjvLoOwISrDEQs4LH6usZLlTdZPQoqPc5uV
 kB5oodsz7tb8NCZW7Y8xc0rYrEwaQKpvTDoZ93V9Zp3qyzxexNxm4akBRRUsFj/0
 MxzyW+F81BxA35FIiRD55yZZ/U7ddoEzjea3tSvfGwDG1jMcV18t5G3LBThTAIIF
 kvo4+xM6a8TPmGdNRSoEyO9vHYob/QzQ2zb7Pujf2SQpp/ULi7DMdNnbp0K/UYxt
 pxwsj9IFR1rwPoHWwSfHZHWbioCeUkXwzf0ar4ydmg1U8AxQRPI2YNqVXP/BTPj6
 GJ6ksHkBK5eK/mcob1s8t7nZDTEY5fiQw3lbQwM4mJaJIO6vza8RrpAcAeICI9FX
 dLZmKQlMZ7vLLP6dSPx2
 =fbBu
 -----END PGP SIGNATURE-----

Merge tag 'regulator-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates for 3.4 from Mark Brown:
 "This has been a fairly quiet release from a regulator point of view,
  the only real framework features added were devm support and a
  convenience helper for setting up fixed voltage regulators.

  We also added a couple of drivers (but will drop the BQ240022 driver
  via the arm-soc tree as it's been replaced by the more generic
  gpio-regulator driver) and Axel Lin continued his relentless and
  generally awesome stream of fixes and cleanups."

* tag 'regulator-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (93 commits)
  regulator: Fix up a confusing dev_warn when DT lookup fails
  regulator: Convert tps6507x to set_voltage_sel
  regulator: Refactor tps6507x to use one tps6507x_pmic_ops for all LDOs and DCDCs
  regulator: Make s5m8767_get_voltage_register always return correct register
  regulator: s5m8767: Check pdata->buck[2|3|4]_gpiodvs earlier
  regulator: tps65910: Provide settling time for DCDC voltage change
  regulator: Add Anatop regulator driver
  regulator: Simplify implementation of tps65912_get_voltage_dcdc
  regulator: Use tps65912_set_voltage_sel for both DCDCx and LDOx
  regulator: tps65910: Provide settling time for enabling rails
  regulator: max8925: Use DIV_ROUND_UP macro
  regulator: tps65912: Use simple equations to get register address
  regulator: Fix the logic of tps65910_get_mode
  regulator: Merge tps65217_pmic_ldo234_ops and tps65217_pmic_dcdc_ops to tps65217_pmic_ops
  regulator: Use DIV_ROUND_CLOSEST in wm8350_isink_get_current
  regulator: Use array to store dcdc_range settings for tps65912
  regulator: Rename s5m8767_convert_voltage to s5m8767_convert_voltage_to_sel
  regulator: tps6524x: Remove unneeded comment for N_REGULATORS
  regulator: Rename set_voltage_sel callback function name to *_sel
  regulator: Fix s5m8767_set_voltage_time_sel calculation value
  ...
2012-03-21 10:34:56 -07:00
Linus Torvalds
c207f3a431 Generialize powerpc's irq_host as irq_domain
This branch takes the PowerPC irq_host infrastructure (reverse mapping
 from Linux IRQ numbers to hardware irq numbering), generalizes it,
 renames it to irq_domain, and makes it available to all architectures.
 
 Originally the plan has been to create an all-new irq_domain
 implementation which addresses some of the powerpc shortcomings such
 as not handling 1:1 mappings well, but doing that proved to be far
 more difficult and invasive than generalizing the working code and
 refactoring it in-place.  So, this branch rips out the 'new'
 irq_domain and replaces it with the modified powerpc version (in a
 fully bisectable way of course).  It converts all users over to the
 new API and makes irq_domain selectable on any architecture.
 
 No architecture is forced to enable irq_domain, but the infrastructure
 is required for doing OpenFirmware style irq translations.  It will
 even work on SPARC even though SPARC has it's own mechanism for
 translating irqs at boot time.  MIPS, microblaze, embedded x86 and c6x
 are converted too.
 
 The resulting irq_domain code is probably still too verbose and can be
 optimized more, but that can be done incrementally and is a task for
 follow-on patches.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPZ1yiAAoJEEFnBt12D9kB4yIQAJvCfTPL65sCYVD6i9RnVHtR
 ahwddtd0AtT+UYLU8Xg2fZgVi6cmupDGnqkBixzZD3xxSTERqm7Snqa0ugklfeAi
 B6Zqf/K17H5hJNaoQ3fkNauow8m7ZYOeEH2vVUvkb3woWS9Wm7OGd+BvcIBgYSGe
 Aaoumhu7kDxFkii0qz3x/+kvsb6DRp2HtSPWj+APL/kNjdiO4JBOihtcc/lX6d47
 bsZLiEMzHUFV4ApJNwqmfDnf54oMrHmrRJxgQHIMjeJC5or9I3Do8wDGe/aTF5xO
 5GVpxCQsTlJMjTBWlAFtpTwCJB6y76EHQrHc7WzLlq8OJSsxApOke8M0BzXFrfMy
 CU7UUpTvNZTLpZibLCEQKemv1+oNOkfFylsHxfek2MCqx0W6W4FHEGV3qE/GtgV9
 +vurA9hNNp7VM0FGRGigcUr3woYdHLdEVQrlnL7Z9AgBu1W44MZLaai7iRVZOeCT
 ZQ9++v2PJJ8vHT8kdkgTdiRpnEhmv84MX/GBT7ilWFEMIVeT5zhGkIBojzNgyzGc
 7cvermmM0P8h+unkDgmzmSbDxo0PboqVKeoO71AOBhA6MmR9iom7XkuNdHhoOwy2
 4A5xT1srbhJDbuv15BBREBV24TywpZ4a1+4nwQT4L1fXe+HfCxeEWexGcKQMRcIt
 dAelOHTQ+ZGkOKvXeW05
 =ruGA
 -----END PGP SIGNATURE-----

Merge tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6

Pull irq_domain support for all architectures from Grant Likely:
 "Generialize powerpc's irq_host as irq_domain

  This branch takes the PowerPC irq_host infrastructure (reverse mapping
  from Linux IRQ numbers to hardware irq numbering), generalizes it,
  renames it to irq_domain, and makes it available to all architectures.

  Originally the plan has been to create an all-new irq_domain
  implementation which addresses some of the powerpc shortcomings such
  as not handling 1:1 mappings well, but doing that proved to be far
  more difficult and invasive than generalizing the working code and
  refactoring it in-place.  So, this branch rips out the 'new'
  irq_domain and replaces it with the modified powerpc version (in a
  fully bisectable way of course).  It converts all users over to the
  new API and makes irq_domain selectable on any architecture.

  No architecture is forced to enable irq_domain, but the infrastructure
  is required for doing OpenFirmware style irq translations.  It will
  even work on SPARC even though SPARC has it's own mechanism for
  translating irqs at boot time.  MIPS, microblaze, embedded x86 and c6x
  are converted too.

  The resulting irq_domain code is probably still too verbose and can be
  optimized more, but that can be done incrementally and is a task for
  follow-on patches."

* tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6: (31 commits)
  dt: fix twl4030 for non-dt compile on x86
  mfd: twl-core: Add IRQ_DOMAIN dependency
  devicetree: Add empty of_platform_populate() for !CONFIG_OF_ADDRESS (sparc)
  irq_domain: Centralize definition of irq_dispose_mapping()
  irq_domain/mips: Allow irq_domain on MIPS
  irq_domain/x86: Convert x86 (embedded) to use common irq_domain
  ppc-6xx: fix build failure in flipper-pic.c and hlwd-pic.c
  irq_domain/microblaze: Convert microblaze to use irq_domains
  irq_domain/powerpc: Replace custom xlate functions with library functions
  irq_domain/powerpc: constify irq_domain_ops
  irq_domain/c6x: Use library of xlate functions
  irq_domain/c6x: constify irq_domain structures
  irq_domain/c6x: Convert c6x to use generic irq_domain support.
  irq_domain: constify irq_domain_ops
  irq_domain: Create common xlate functions that device drivers can use
  irq_domain: Remove irq_domain_add_simple()
  irq_domain: Remove 'new' irq_domain in favour of the ppc one
  mfd: twl-core.c: Fix the number of interrupts managed by twl4030
  of/address: add empty static inlines for !CONFIG_OF
  irq_domain: Add support for base irq and hwirq in legacy mappings
  ...
2012-03-21 10:27:19 -07:00
Linus Torvalds
69a7aebcf0 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree from Jiri Kosina:
 "It's indeed trivial -- mostly documentation updates and a bunch of
  typo fixes from Masanari.

  There are also several linux/version.h include removals from Jesper."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (101 commits)
  kcore: fix spelling in read_kcore() comment
  constify struct pci_dev * in obvious cases
  Revert "char: Fix typo in viotape.c"
  init: fix wording error in mm_init comment
  usb: gadget: Kconfig: fix typo for 'different'
  Revert "power, max8998: Include linux/module.h just once in drivers/power/max8998_charger.c"
  writeback: fix fn name in writeback_inodes_sb_nr_if_idle() comment header
  writeback: fix typo in the writeback_control comment
  Documentation: Fix multiple typo in Documentation
  tpm_tis: fix tis_lock with respect to RCU
  Revert "media: Fix typo in mixer_drv.c and hdmi_drv.c"
  Doc: Update numastat.txt
  qla4xxx: Add missing spaces to error messages
  compiler.h: Fix typo
  security: struct security_operations kerneldoc fix
  Documentation: broken URL in libata.tmpl
  Documentation: broken URL in filesystems.tmpl
  mtd: simplify return logic in do_map_probe()
  mm: fix comment typo of truncate_inode_pages_range
  power: bq27x00: Fix typos in comment
  ...
2012-03-20 21:12:50 -07:00
Venu Byravarasu
3c33be06f9 mfd: Add support for TPS65090
TPS65090 is a Texas Instrument PMIC. It contains 3 Step-Down converters, 2
always on LDO's and  7 current limited load switches.

Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-20 16:56:33 +01:00
Dmitry Torokhov
bcc2d6d6fc mfd: Add some da9052-i2c section annotations
da9052_i2c_remove() can and should be marked as __devexit.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-20 16:38:14 +01:00
Laxman Dewangan
5364d0b864 mfd: Build rtc5t583 only if I2C config is selected to y.
Fixing build error reported by Stephen Rothwell:

drivers/built-in.o: In function `rc5t583_i2c_init':
rc5t583.c:(.init.text+0xb3db): undefined reference to `i2c_register_driver'
drivers/built-in.o: In function `rc5t583_i2c_probe':
rc5t583.c:(.devinit.text+0x8fa0): undefined reference to `regmap_init_i2c'
drivers/built-in.o: In function `rc5t583_i2c_exit':
rc5t583.c:(.exit.text+0x708): undefined reference to `i2c_del_driver'

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-20 13:49:45 +01:00
Mark Brown
4992fa1fd4 TWL specific changes, cross-merged with OMAP due to arch/arm wanting to
use the new ability to override the voltage set and get operations to
 support the in-CPU voltage management.  The other changes are minor
 fixes, the addition of a few new regulators and device tree support.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPXQiBAAoJEBus8iNuMP3dhiMP/2z1ImskdfEg+nT43nX4qjge
 MFiHzynz13X4VvOB3+rE0OsBmTjRdjpZzsND3g673D6RuT2mfSAj270AbsJ9bZNR
 Fz8c/RAv2LWG5GKNCB8cWFoxVxk7xhrpE31a6JYV10HBhxmg/6ESaKs63W6MKWQk
 NSfQdE2PujrCIYBwqCYP4knk+Gx4R5GBMol8hXjIkmcSPCnZ71/o6UMu0OsJ6e37
 LKwkBT8zY72HhmBrWNmHXrH94dCYv9XjTtOfjhF97+UAFAuVcztXUq4ZKFNUPuNN
 QLAftkoKPXbSUpqvmmMCJQcNUMvpEGFh42JLZO1S8HN5Mb5+CPE2oS62QNtbrbrV
 cwxpWUse823qJSHXwCWS4ai9M3fO/1tWEfo4nWauKyAgXLV/udF0nBVnSjv72Agg
 cJsmVNOdwLUb89izD2Q05gvObfzPLxjFrGMTHZ1p+h5rgIdQq6ttx4yoZIlmUMqy
 eBFWofYRbxS3UDVteBNZGuAb5AMFuMPrlmluTGWftY41d8mgFLyreNoFReEbeiDP
 ZRpulqoOll1KYdTwg3BbgfS/x8FsSdtH8LBP2BIsmZ6q7hG7CEoG/OOk4ex4vuMx
 AgUV8uRfQ7HjW5NkAX6kOvm3IH6yUOq7uysifKvs+iBRjT2kP0iw3OThdImHDetq
 kjIFEOq+og9NNJ7fLFAB
 =EHNp
 -----END PGP SIGNATURE-----

Merge tag 'topic/twl' into regulator-next

TWL specific changes, cross-merged with OMAP due to arch/arm wanting to
use the new ability to override the voltage set and get operations to
support the in-CPU voltage management.  The other changes are minor
fixes, the addition of a few new regulators and device tree support.
2012-03-19 17:17:32 +00:00
Mark Brown
115e4bfd5b Merge remote-tracking branch 'regulator/topic/supply' into regulator-next 2012-03-18 21:39:19 +00:00
Ying-Chun Liu (PaulLiu)
75060a1d9d mfd: Add anatop mfd driver
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Venu Byravarasu <vbyravarasu@nvidia.com>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Rob Lee <rob.lee@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16 21:12:32 +01:00
Bengt Jonsson
1927ddf668 mfd: Add 8420 variant to db8500-prcmu
Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16 20:59:19 +01:00
Bengt Jonsson
5f96a1a6d5 mfd: Add 8520 PRCMU variant to db8500-prcmu
Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Reviewed-by: Mattias Nilssson <mattias.i.nilsson@stericsson.com>
Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16 20:59:01 +01:00
Mattias Nilsson
d902d0d18c mfd: Remove obsolete hwacc implementation for db8500-prmcu
This patch removes the obsolete hwacc implementation in the
DB8500 PRCMU driver.

Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16 20:58:39 +01:00
Axel Lin
829ecbcb14 mfd: Use DIV_ROUND_CLOSEST for sm501 clock
Use DIV_ROUND_CLOSEST to replace sm501fb_round_div function.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16 20:37:47 +01:00
Laxman Dewangan
1b1247dd75 mfd: Add support for RICOH PMIC RC5T583
Ricoh power management IC  RC5T583 contains is multi
functional device having multiple sub devices inside this.
This device has multiple dcdc/ldo regulators, gpios, interrupt
controllers, on-key, RTCs, ADCs.
This device have 4 DCDCs, 8 LDOs, 8 GPIOs, 6 ADCs, 3 RTCs etc.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16 20:05:45 +01:00
Mattias Nilsson
bc628fd19d mfd: Make use of the ab8500 firmware read-modify-write service
This patch updates the AB8500 driver to make use of the I2C
read-modify-write service in the PRCMU firmware.

Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
Reviewed-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16 19:45:33 +01:00
Mattias Nilsson
3c3e489831 mfd: Add a prcmu_abb_write_masked routine to db8500-prcmu
This patch adds driver support for the I2C read-modify-write
service in the U8500 PRCMU firmware.

Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16 19:45:08 +01:00
Bengt Jonsson
a982362c17 mfd: Support for the AB8500 AB8505 variant
This builds upon the changes done to support AB9540 so as
also to support the AB8505 derivative of the AB8500
circuit.

Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16 19:44:20 +01:00
Rabin Vincent
392cbd1e60 mfd: Don't use mutex_lock_interruptible in ab8500-core
This disadvantage of having it interruptible is that it would
appear to work OK in most situations, but in the rare case
that this call does fail, it can lead to misconfiguration
of the AB, such as a regulator not being turned off and
leading to a platform power consumption increase.

There's no real benefit to having this interruptible.

Make it a plain mutex_lock. The non-interruptability matches
other low-level I/O functions such as SPI and I2C.

Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16 19:43:36 +01:00
Laxman Dewangan
39ecb03765 mfd: Use correct variable name for tps65910 regmap config
This was the copy-paste issue in reg cache support code where
variable name for regmap config was not really starting from
the device name, it was starting from some other device name.
Fixing this so that variable name contains actual device name.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16 18:50:51 +01:00
Mark Brown
618dd15d21 mfd: wm8994: Fix register default for WM1811 AntiPOP2
Should be all bits clear.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16 17:44:51 +01:00
Mark Brown
9f9efcd526 mfd: wm8994: Remove defaults for volatile registers
Some volatile registers accidentally had defaults added, though there were
no harmful side effects other than increased memory consumption.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16 17:44:51 +01:00
Peter Ujfalusi
46eda3e96a mfd: twl-core: regulator configuration for twl6030 V1V8, V2V1 SMPS
To be able to attach consumers to these supplies from board
files we need to have regulator_init_data for them.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11 20:09:26 +00:00
Tero Kristo
34a3844068 regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators
vdd1 and vdd2 are now common regulators for twl4030 and twl6030. Also
added vdd3 as a new regulator for twl6030. twl6030 vdd1...vdd3 smps
regulator voltages can only be controlled through the smartreflex
voltage channel, thus the support for the voltage_get and set is
minimal and requires external controller.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11 20:09:00 +00:00
Tero Kristo
63bfff4e20 regulator: twl4030: add support for external voltage get/set
This is needed for SMPS regulators, which use the OMAP voltage
processor for voltage get/set functions instead of the normal I2C
channel. For this purpose, regulator_init_data->driver_data contents
are expanded, it is now a struct which contains function pointers
for the set/get voltage operations, a data pointer for these, and
the previously used features bitmask.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com> [for the MFD part]
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-11 20:08:45 +00:00
Paul Gortmaker
51990e8254 device.h: cleanup users outside of linux/include (C files)
For files that are actively using linux/device.h, make sure
that they call it out.  This will allow us to clean up some
of the implicit uses of linux/device.h within include/*
without introducing build regressions.

Yes, this was created by "cheating" -- i.e. the headers were
cleaned up, and then the fallout was found and fixed, and then
the two commits were reordered.  This ensures we don't introduce
build regressions into the git history.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-03-11 14:27:37 -04:00
Samuel Ortiz
2f5f89be6f mfd: Fix pm8606 build failure
Reported by Andrew Morton <akpm@linux-foundation.org>, with
i386 allmodconfig:

ERROR: "pm8606_osc_disable" [drivers/video/backlight/88pm860x_bl.ko] undefined!
ERROR: "pm8606_osc_enable" [drivers/video/backlight/88pm860x_bl.ko] undefined!
ERROR: "pm8606_osc_disable" [drivers/leds/leds-88pm860x.ko] undefined!
ERROR: "pm8606_osc_enable" [drivers/leds/leds-88pm860x.ko] undefined!

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06 18:46:57 +01:00
Axel Lin
5a924d13ec mfd: Fix a typo in MFD_MAX8997 Kconfig entry
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06 18:46:57 +01:00