FBIO_WAITFORVSYNC is currently implemented by matroxfb, atyfb, intelfb and
more. All of them keep redefining the same FBIO_WAITFORVSYNC macro over
and over again, so move it to linux/fb.h and clean up those duplicate
defines.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Cc: Ville Syrjala <syrjala@sci.fi>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Maik Broemme <mbroemme@plusserver.de>
Cc: Petr Vandrovec <vandrove@vc.cvut.cz>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: "Hiremath, Vaibhav" <hvaibhav@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Support the Intel 854 Chipset in fbdev.
We test and use the patch on a Thomson IP1101 IPTV-Box. On the VGA-Port
we get a normal signal.
Here is the link to the Mambux-Project: http://www.mambux.de
Cc: Keith Packard <keithp@keithp.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Stefan Husemann <shusemann@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add support for Intel's 945GME graphics chip to the intelfb driver. I
have assumed that the 945GME is identical to the already-supported 945GM
apart from its PCI IDs; this is based on a quick look at the X driver for
these chips which seems to treat them identically.
The 945GME is used in the ASUS Eee 901, and I coded this in the hope that
I'd be able to use it to get a console at the native 1024x600 resolution
which is not known to the BIOS. I realised too late that the intelfb
driver does not support mode changing on laptops, so it won't be any
use for me.
Signed-off-by: Phil Endecott <spam_from_intelfb@chezphil.org>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add support for the 965G and 965GM graphic chipsets to the intelfb driver. I
have a notebook with an Intel Mobile GM965/GL960 Integrated Graphics
Controller and with the attached patch the framebuffer comes up. I have
tested it a bit with DirectFB to make sure it is working stable.
I also have an Intel Mobile GM945 and I compared the results, the programming
interface of the 9xx series from Intel is mostly the same, so I think the
patch should add all the functionality which the 945GM has.
Signed-off-by: Maik Broemme <mbroemme@plusserver.de>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Antonino Daplas <adaplas@pol.net>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The pseudo_palette is only 16 elements long.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[06/07] intelfb: adds intelfb_i2c.c which contains the infrastructure needed to
enumerate the i2c busses on the intelfb.
Signed-off-by: Dennis Munsie <dmunsie@cecropia.com>
[05/05] intelfb: Honor FB_ACTIVATE_VBL for display panning
Extends the intelfb_vsync struct to store panning offset. The interrupt service routine uses the stored panning offset if a pan is requested for the vsync. intelfbhw_disable_irq also pans the display if there is a pending request.
Signed-off-by: Eric Hustvedt <ehustvedt@cecropia.com>
[04/05] intelfb: implement FBIO_WAITFORVSYNC ioctl
The (unofficial) FBIO_WAITFORVSYNC ioctl is implemented by sleeping on the appropriate waitqueue, as defined in my earlier patch. Currently, only display 0 (aka pipe A) is supported.
Signed-off-by: Eric Hustvedt <ehustvedt@cecropia.com>
[03/05] intelfb: Implement basic interrupt handling
Functions have been added to enable and disable interrupts using the MMIO registers. Currently only pipe A vsync interrupts are enabled.
A generalized vsync accounting struct is defined, with the intent that it can encapsulate per-pipe vsync related info in the future. Currently a single instance is hard-coded.
The interrupt service routine currently only looks for vsync interrupts on pipe A, and increments a counter and wakes up anyone waiting on it.
This implementation is heavily influenced by similar implementations in the atyfb and matroxfb drivers.
Signed-off-by: Eric Hustvedt <ehustvedt@cecropia.com>
[02/05] intelfb: Add interrupt related register definitions
Add constants for accessing HWSTAM, IER, IIR, and IMR registers.
Add constants for interrupt types supported by the 8xx and 9xx chipsets.
The registers are also stored in the hwstate struct and dumped in the debug routine.
Signed-off-by: Eric Hustvedt <ehustvedt@cecropia.com>
ring_head is offset in card memory, not iomem pointer. Fixed, removed
fuckloads of amazingly bogus casts somebody had sprinkled all over the
place.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dave Airlie <airlied@linux.ie>
This fixes up the p calculation of p1 and p2 for the i9xx chipsets.
This seems to work a lot better for lower pixel clocks..
Signed-off-by: Dave Airlie <airlied@linux.ie>
Fix intelfb trying to free a non-existent resource in its error path.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add partial support for GMA900 within the i915GM chipset.
Signed-off-by: Scott MacKenzie <irrational@poboxes.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch removes drivers that have hardware cursors from calling the
software cursor code. Also if the driver sets a no hardware cursor flag
then the driver reports a error it someone attempts to use the cursor.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
