Commit Graph

1879 Commits (8175e5b79c38a1d85225da516fa1a0ecbf2fdbca)

Author SHA1 Message Date
Tejun Heo ece84241b9 block: fix genhd refcounting in blkio_policy_parse_and_set()
blkio_policy_parse_and_set() calls blkio_check_dev_num() to check
whether the given dev_t is valid.  blkio_check_dev_num() uses
get_gendisk() for verification but never puts the returned genhd
leaking the reference.

This patch collapses blkio_check_dev_num() into its caller and updates
it such that the genhd is put before returning.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19 14:31:15 +02:00
Tejun Heo 523e1d399c block: make gendisk hold a reference to its queue
The following command sequence triggers an oops.

# mount /dev/sdb1 /mnt
# echo 1 > /sys/class/scsi_device/0\:0\:1\:0/device/delete
# umount /mnt

 general protection fault: 0000 [#1] PREEMPT SMP
 CPU 2
 Modules linked in:

 Pid: 791, comm: umount Not tainted 3.1.0-rc3-work+ #8 Bochs Bochs
 RIP: 0010:[<ffffffff810d0879>]  [<ffffffff810d0879>] __lock_acquire+0x389/0x1d60
...
 Call Trace:
  [<ffffffff810d2845>] lock_acquire+0x95/0x140
  [<ffffffff81aed87b>] _raw_spin_lock+0x3b/0x50
  [<ffffffff811573bc>] bdi_lock_two+0x5c/0x70
  [<ffffffff811c2f6c>] bdev_inode_switch_bdi+0x4c/0xf0
  [<ffffffff811c3fcb>] __blkdev_put+0x11b/0x1d0
  [<ffffffff811c4010>] __blkdev_put+0x160/0x1d0
  [<ffffffff811c40df>] blkdev_put+0x5f/0x190
  [<ffffffff8118f18d>] kill_block_super+0x4d/0x80
  [<ffffffff8118f4a5>] deactivate_locked_super+0x45/0x70
  [<ffffffff8119003a>] deactivate_super+0x4a/0x70
  [<ffffffff811ac4ad>] mntput_no_expire+0xed/0x130
  [<ffffffff811acf2e>] sys_umount+0x7e/0x3a0
  [<ffffffff81aeeeab>] system_call_fastpath+0x16/0x1b

This is because bdev holds on to disk but disk doesn't pin the
associated queue.  If a SCSI device is removed while the device is
still open, the sdev puts the base reference to the queue on release.
When the bdev is finally released, the associated queue is already
gone along with the bdi and bdev_inode_switch_bdi() ends up
dereferencing already freed bdi.

Even if it were not for this bug, disk not holding onto the associated
queue is very unusual and error-prone.

Fix it by making add_disk() take an extra reference to its queue and
put it on disk_release() and ensuring that disk and its fops owner are
put in that order after all accesses to the disk and queue are
complete.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19 14:31:07 +02:00
Jens Axboe 5c04b426f2 Merge branch 'v3.1-rc10' into for-3.2/core
Conflicts:
	block/blk-core.c
	include/linux/blkdev.h

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19 14:30:42 +02:00
Hannes Reinecke 777eb1bf15 block: Free queue resources at blk_release_queue()
A kernel crash is observed when a mounted ext3/ext4 filesystem is
physically removed. The problem is that blk_cleanup_queue() frees up
some resources eg by calling elevator_exit(), which are not checked for
in normal operation. So we should rather move these calls to the
destructor function blk_release_queue() as at that point all remaining
references are gone. However, in doing so we have to ensure that any
externally supplied queue_lock is disconnected as the driver might free
up the lock after the call of blk_cleanup_queue(),

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-28 08:07:01 -06:00
Wanlong Gao d11bb4462c blk-cgroup: be able to remove the record of unplugged device
The bug is we're not able to remove the device from blkio cgroup's
per-device control files if it gets unplugged.

To reproduce the bug:

  # mount -t cgroup -o blkio xxx /cgroup
  # cd /cgroup
  # echo "8:0 1000" > blkio.throttle.read_bps_device
  # unplug the device
  # cat blkio.throttle.read_bps_device
  8:0	1000
  # echo "8:0 0" > blkio.throttle.read_bps_device
  -bash: echo: write error: No such device

After patching, the device removal will succeed.

Thanks for the comments of Paul, Zefan, and Vivek.

Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <paul@paulmenage.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-21 10:22:10 +02:00
Andrew Morton 499337bb65 block/blk-sysfs.c: fix kerneldoc references
The kerneldoc for blk_release_queue() is referring to blk_cleanup_queue().

Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-21 10:01:22 +02:00
Suresh Jayaraman 75df713627 block: document blk-plug
Thus spake Andrew Morton:

"And I have the usual maintainability whine.  If someone comes up to
vmscan.c and sees it calling blk_start_plug(), how are they supposed to
work out why that call is there?  They go look at the blk_start_plug()
definition and it is undocumented.  I think we can do better than this?"

Adapted from the LWN article - http://lwn.net/Articles/438256/ by Jens
Axboe and from an earlier attempt by Shaohua Li to document blk-plug.

[akpm@linux-foundation.org: grammatical and spelling tweaks]
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-21 10:00:16 +02:00
Christoph Hellwig 27a84d54c0 block: refactor generic_make_request
Move all the checks performed on a bio into a new helper, and call it as
soon as bio is submitted even if it is a re-submission from ->make_request.

We explicitly mark the new helper as beeing non-inlined as the stack
usage for printing the block device name in the failure case is quite
high and this a patch where we have to be extremely conservative about
stack usage.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-15 14:01:40 +02:00
Tao Ma 8ad6a56f56 block: Don't check QUEUE_FLAG_SAME_COMP in __blk_complete_request
In __blk_complete_request, we check both QUEUE_FLAG_SAME_COMP and req->cpu
to decide whether we should use req->cpu. Actually the user can also
select the complete cpu by either setting BIO_CPU_AFFINE or by calling
bio_set_completion_cpu. Current solution makes these 2 ways don't work
any more. So we'd better just check req->cpu.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-14 09:31:01 +02:00
Christoph Hellwig 5a7bbad27a block: remove support for bio remapping from ->make_request
There is very little benefit in allowing to let a ->make_request
instance update the bios device and sector and loop around it in
__generic_make_request when we can archive the same through calling
generic_make_request from the driver and letting the loop in
generic_make_request handle it.

Note that various drivers got the return value from ->make_request and
returned non-zero values for errors.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-09-12 12:12:01 +02:00
Jens Axboe c20e8de27f block: rename __make_request() to blk_queue_bio()
Now that it's exported, lets put it in a more sane namespace.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-09-12 12:08:31 +02:00
Christoph Hellwig 166e1f901b block: export __make_request
Avoid the hacks need for request based device mappers currently by simply
exporting the symbol instead of trying to get it through the back door.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-09-12 12:08:27 +02:00
Wang Sheng-Hui 484fc254b8 elevator: use ELV_NAME_MAX instead of magic number 16 for chosen_elevator
We have ELV_NAME_MAX defined to 16, and hence we should use it
instead of the magic nubmer 16 for elevator's name string.

Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-09-12 08:59:20 +02:00
Nao Nishijima a72c5e5eb7 [SCSI] genhd: add a new attribute "alias" in gendisk
This patch allows the user to set an "alias" of the disk via sysfs interface.

This patch only adds a new attribute "alias" in gendisk structure.
To show the alias instead of the device name in kernel messages,
we need to revise printk messages and use alias_name() in them.

Example:
(current) printk("disk name is %s\n", disk->disk_name);
(new)     printk("disk name is %s\n", alias_name(disk));

Users can use alphabets, numbers, '-' and '_' in "alias" attribute. A disk can
have an "alias" which length is up to 255 bytes. This attribute is write-once.

Suggested-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Suggested-by: Jon Masters <jcm@redhat.com>
Signed-off-by: Nao Nishijima <nao.nishijima.xt@hitachi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-29 00:16:19 -07:00
Shaohua Li 56ebdaf2fa block: simplify force plug flush code a little bit
Cleaning up the code a little bit. attempt_plug_merge() traverses the plug
list anyway, we can do the request counting there, so stack size is reduced
a little bit.
The motivation here is I suspect if we should count the requests for each
queue (task could handle multiple disks in the meantime), but my test doesn't
show it's worthy doing. If somebody proves we should do it, below change
will make that more easier.

Signed-off-by: Shaohua Li <shli@kernel.org>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-24 16:04:34 +02:00
Shaohua Li a632716275 block: change force plug flush call order
Do blk_flush_plug_list() first and then add new request aDo blk_flush_plug_list() first and then add new request aDo blk_flush_plug_list() first and then add new request at the tail. New
request can't be merged to existing requests, but later new requests might
be merged with this new one. If blk_flush_plug_list() is done later, the
merge doesn't happen.
Believe it or not, this fixes a 10% regression running sysbench workload.

Signed-off-by: Shaohua Li <shli@kernel.org>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-24 16:04:32 +02:00
Eric Seppanen e8037d4983 block: Fix queue_flag update when rq_affinity goes from 2 to 1
Commit 5757a6d76c added the QUEUE_FLAG_SAME_FORCE flag, but fails to
clear that flag when the current state is '2' (SAME_COMP + SAME_FORCE)
and the new state is '1' (SAME_COMP).

Acked-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Eric Seppanen <eric@purestorage.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-24 08:51:34 +02:00
Tejun Heo d27769ec3d block: add GENHD_FL_NO_PART_SCAN
There are cases where suppressing partition scan is useful - e.g. for
lo devices and pseudo SATA devices which advertise to be a disk but
get upset on partition scan (some port multiplier control devices show
such behavior).

This patch adds GENHD_FL_NO_PART_SCAN which suppresses partition scan
regardless of the number of possible partitions.  disk_partitionable()
is renamed to disk_part_scan_enabled() as suppressing partition scan
doesn't imply the device can't be partitioned using
BLKPG_ADD/DEL_PARTITION calls from userland.  show_partition() now
directly tests disk_max_parts() to maintain backward-compatibility.

-v2: Updated to make it clear that only partition scan is suppressed
     not partitioning itself as suggested by Kay Sievers.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-23 20:01:04 +02:00
Christoph Hellwig 65299a3b78 block: separate priority boosting from REQ_META
Add a new REQ_PRIO to let requests preempt others in the cfq I/O schedule,
and lave REQ_META purely for marking requests as metadata in blktrace.

All existing callers of REQ_META except for XFS are updated to also
set REQ_PRIO for now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-23 14:50:29 +02:00
Linus Torvalds 5ccc38740a Merge branch 'for-linus' of git://git.kernel.dk/linux-block
* 'for-linus' of git://git.kernel.dk/linux-block: (23 commits)
  Revert "cfq: Remove special treatment for metadata rqs."
  block: fix flush machinery for stacking drivers with differring flush flags
  block: improve rq_affinity placement
  blktrace: add FLUSH/FUA support
  Move some REQ flags to the common bio/request area
  allow blk_flush_policy to return REQ_FSEQ_DATA independent of *FLUSH
  xen/blkback: Make description more obvious.
  cfq-iosched: Add documentation about idling
  block: Make rq_affinity = 1 work as expected
  block: swim3: fix unterminated of_device_id table
  block/genhd.c: remove useless cast in diskstats_show()
  drivers/cdrom/cdrom.c: relax check on dvd manufacturer value
  drivers/block/drbd/drbd_nl.c: use bitmap_parse instead of __bitmap_parse
  bsg-lib: add module.h include
  cfq-iosched: Reduce linked group count upon group destruction
  blk-throttle: correctly determine sync bio
  loop: fix deadlock when sysfs and LOOP_CLR_FD race against each other
  loop: add BLK_DEV_LOOP_MIN_COUNT=%i to allow distros 0 pre-allocated loop devices
  loop: add management interface for on-demand device allocation
  loop: replace linked list of allocated devices with an idr index
  ...
2011-08-19 10:47:07 -07:00
Jens Axboe b53d1ed734 Revert "cfq: Remove special treatment for metadata rqs."
We have a kernel build regression since 3.1-rc1, which is about 10%
regression. The kernel source is in an ext3 filesystem.
Alex Shi bisect it to commit:
commit a07405b780
Author: Justin TerAvest <teravest@google.com>
Date:   Sun Jul 10 22:09:19 2011 +0200

    cfq: Remove special treatment for metadata rqs.

Apparently this is caused by lack metadata preemption, where ext3/ext4
do use READ_META. I didn't see a way to fix the issue, so suggest
reverting the patch.

This reverts commit a07405b780.

Reported-by: Alex Shi<alex.shi@intel.com>
Reported-by: Shaohua Li<shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-19 08:34:48 +02:00
Jeff Moyer 4853abaae7 block: fix flush machinery for stacking drivers with differring flush flags
Commit ae1b153962, block: reimplement
FLUSH/FUA to support merge, introduced a performance regression when
running any sort of fsyncing workload using dm-multipath and certain
storage (in our case, an HP EVA).  The test I ran was fs_mark, and it
dropped from ~800 files/sec on ext4 to ~100 files/sec.  It turns out
that dm-multipath always advertised flush+fua support, and passed
commands on down the stack, where those flags used to get stripped off.
The above commit changed that behavior:

static inline struct request *__elv_next_request(struct request_queue *q)
{
        struct request *rq;

        while (1) {
-               while (!list_empty(&q->queue_head)) {
+               if (!list_empty(&q->queue_head)) {
                        rq = list_entry_rq(q->queue_head.next);
-                       if (!(rq->cmd_flags & (REQ_FLUSH | REQ_FUA)) ||
-                           (rq->cmd_flags & REQ_FLUSH_SEQ))
-                               return rq;
-                       rq = blk_do_flush(q, rq);
-                       if (rq)
-                               return rq;
+                       return rq;
                }

Note that previously, a command would come in here, have
REQ_FLUSH|REQ_FUA set, and then get handed off to blk_do_flush:

struct request *blk_do_flush(struct request_queue *q, struct request *rq)
{
        unsigned int fflags = q->flush_flags; /* may change, cache it */
        bool has_flush = fflags & REQ_FLUSH, has_fua = fflags & REQ_FUA;
        bool do_preflush = has_flush && (rq->cmd_flags & REQ_FLUSH);
        bool do_postflush = has_flush && !has_fua && (rq->cmd_flags &
        REQ_FUA);
        unsigned skip = 0;
...
        if (blk_rq_sectors(rq) && !do_preflush && !do_postflush) {
                rq->cmd_flags &= ~REQ_FLUSH;
		if (!has_fua)
			rq->cmd_flags &= ~REQ_FUA;
	        return rq;
	}

So, the flush machinery was bypassed in such cases (q->flush_flags == 0
&& rq->cmd_flags & (REQ_FLUSH|REQ_FUA)).

Now, however, we don't get into the flush machinery at all.  Instead,
__elv_next_request just hands a request with flush and fua bits set to
the scsi_request_fn, even if the underlying request_queue does not
support flush or fua.

The agreed upon approach is to fix the flush machinery to allow
stacking.  While this isn't used in practice (since there is only one
request-based dm target, and that target will now reflect the flush
flags of the underlying device), it does future-proof the solution, and
make it function as designed.

In order to make this work, I had to add a field to the struct request,
inside the flush structure (to store the original req->end_io).  Shaohua
had suggested overloading the union with rb_node and completion_data,
but the completion data is used by device mapper and can also be used by
other drivers.  So, I didn't see a way around the additional field.

I tested this patch on an HP EVA with both ext4 and xfs, and it recovers
the lost performance.  Comments and other testers, as always, are
appreciated.

Cheers,
Jeff

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-15 21:37:25 +02:00
Shaohua Li bcf30e75b7 block: improve rq_affinity placement
This patch reverts commit 35ae66e0a09ab70ed(block: Make rq_affinity = 1
work as expected). The purpose is to avoid an unnecessary IPI.
Let's take an example. My test box has cpu 0-7, one socket. Say request is
added from CPU 1, blk_complete_request() occurs at CPU 7. Without the reverted
patch, softirq will be done at CPU 7. With it, an IPI will be directed to CPU
0, and softirq will be done at CPU 0. In this case, doing softirq at CPU 0 and
CPU 7 have no difference from cache sharing point view and we can avoid an
ipi if doing it in CPU 7.
An immediate concern is this is just like QUEUE_FLAG_SAME_FORCE, but actually
not. blk_complete_request() is running in interrupt handler, and currently
I/O controller doesn't support multiple interrupts (I checked several LSI
cards and AHCI), so only one CPU can run blk_complete_request(). This is
still quite different as QUEUE_FLAG_SAME_FORCE.
Since only one CPU runs softirq, the only difference with below patch is
softirq not always runs at the first CPU of a group.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-11 10:39:04 +02:00
Jeff Moyer fa1bf42ff9 allow blk_flush_policy to return REQ_FSEQ_DATA independent of *FLUSH
blk_insert_flush has the following check:

	/*
	 * If there's data but flush is not necessary, the request can be
	 * processed directly without going through flush machinery.  Queue
	 * for normal execution.
	 */
	if ((policy & REQ_FSEQ_DATA) &&
	    !(policy & (REQ_FSEQ_PREFLUSH | REQ_FSEQ_POSTFLUSH))) {
		list_add_tail(&rq->queuelist, &q->queue_head);
		return;
	}

However, blk_flush_policy will not return with policy set to only
REQ_FSEQ_DATA:

static unsigned int blk_flush_policy(unsigned int fflags, struct request *rq)
{
	unsigned int policy = 0;

	if (fflags & REQ_FLUSH) {
		if (rq->cmd_flags & REQ_FLUSH)
			policy |= REQ_FSEQ_PREFLUSH;
		if (blk_rq_sectors(rq))
			policy |= REQ_FSEQ_DATA;
		if (!(fflags & REQ_FUA) && (rq->cmd_flags & REQ_FUA))
			policy |= REQ_FSEQ_POSTFLUSH;
	}
	return policy;
}

Notice that REQ_FSEQ_DATA is only set if REQ_FLUSH is set.  Fix this
mismatch by moving the setting of REQ_FSEQ_DATA outside of the REQ_FLUSH
check.

Tejun notes:

  Hmmm... yes, this can become a correctness issue if (and only if)
  blk_queue_flush() is called to change q->flush_flags while requests
  are in-flight; otherwise, requests wouldn't reach the function at all.
  Also, I think it would be a generally good idea to always set
  FSEQ_DATA if the request has data.

Cheers,
Jeff

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-09 20:32:09 +02:00
Tao Ma 35ae66e0a0 block: Make rq_affinity = 1 work as expected
Commit 5757a6d76c introduced a new rq_affinity = 2 so as to make
the request completed in the __make_request cpu. But it makes the
old rq_affinity = 1 not work any more. The root cause is that
if the 'cpu' and 'req->cpu' is in the same group and cpu != req->cpu,
ccpu will be the same as group_cpu, so the completion will be
excuted in the 'cpu' not 'group_cpu'.

This patch fix problem by simpling removing group_cpu and the codes
are more explicit now. If ccpu == cpu, we complete in cpu, otherwise
we raise_blk_irq to ccpu.

Cc: Christoph Hellwig <hch@infradead.org>
Cc: Roland Dreier <roland@purestorage.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Reviewed-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-05 09:37:47 +02:00
Akinobu Mita dd48c085c1 fault-injection: add ability to export fault_attr in arbitrary directory
init_fault_attr_dentries() is used to export fault_attr via debugfs.
But it can only export it in debugfs root directory.

Per Forlin is working on mmc_fail_request which adds support to inject
data errors after a completed host transfer in MMC subsystem.

The fault_attr for mmc_fail_request should be defined per mmc host and
export it in debugfs directory per mmc host like
/sys/kernel/debug/mmc0/mmc_fail_request.

init_fault_attr_dentries() doesn't help for mmc_fail_request.  So this
introduces fault_create_debugfs_attr() which is able to create a
directory in the arbitrary directory and replace
init_fault_attr_dentries().

[akpm@linux-foundation.org: extraneous semicolon, per Randy]
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Tested-by: Per Forlin <per.forlin@linaro.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-03 14:25:20 -10:00
Herbert Poetzl f95fe9cfb4 block/genhd.c: remove useless cast in diskstats_show()
Remove the (unsigned long long) cast in diskstats_show() and adjusts the
seq_printf() format string to 'unsigned long'

diskstats_show() uses part_stat_read() to get the stats, which either
accesses the specified field in the struct disk_stats directly (non SMP)
or sums up the per CPU values in a variable of the same type as the field,
so in any case the result will have the same type and range as the
specified field which for all disk_stats entries is unsigned long

Also, for unsigned long ranges the output of %lu should be identical to
the one of %llu, so no change in the actual proc entry contents.

Signed-off-by: Herbert Poetzl <herbert@13thfloor.at>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-02 12:43:50 +02:00
Jens Axboe e2a5429ff7 bsg-lib: add module.h include
Due to conflicts with the moduleh tree in linux-next, we
run into an include file mess. We really need export.h
in that tree, but if we add module.h locally then the
issue is easier to resolve.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-02 10:43:35 +02:00
Vivek Goyal a5395b83b7 cfq-iosched: Reduce linked group count upon group destruction
FQ keeps track of number of groups which are linked on blkcg->blkg_list.
This is useful to avoid races between queue exit and cgroup exit code
paths. So if at the request queue exit time linked group count is not
zero, that means there are some group out there which is yet to be
deleted under rcu read period and queue exit code should wait for
on rcu period.

In my previous patch I forgot to decrease the number of group count.
So in current form, we nr_blkcg_linked_grps is always non-zero and
we will always wait one rcu period (if BLK_CGROUP=y). The side effect
of this is that it can increase boot time. I am surprised, nobody
complained so far.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-02 09:24:09 +02:00
Shaohua Li e5a94f5684 blk-throttle: correctly determine sync bio
read request is always sync. Using rw_is_sync() to determine
if a bio is sync.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-01 10:31:06 +02:00
Mike Christie aa387cc895 block: add bsg helper library
This moves the FC classes bsg code to the block layer and
makes it a lib so that other classes like iscsi and SAS can use it.

It is helpful because working with the request queue, bios,
creating scatterlists, etc are a pain that the LLD does not
have to worry about with normal IOs and should not have to
worry about for bsg requests.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-07-31 22:05:09 +02:00
Akinobu Mita b2c9cd3793 fail_make_request: cleanup should_fail_request
This changes should_fail_request() to more usable wrapper function of
should_fail().  It can avoid putting #ifdef CONFIG_FAIL_MAKE_REQUEST in
the middle of a function.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:46 -07:00
Jens Axboe 11ccf116d0 block: fix warning with calling smp_processor_id() in preemptible section
After commit 5757a6d7 introduced an unsafe calling of
smp_processor_id(), with preempt debuggin turned on we spew a lot of:

BUG: using smp_processor_id() in preemptible [00000000] code: kjournald/514
caller is __make_request+0x1b8/0x308
[<c0019f44>] (unwind_backtrace+0x0/0xe8) from [<c024b4cc>] (debug_smp_processor_id+0xbc/0xf0)
[<c024b4cc>] (debug_smp_processor_id+0xbc/0xf0) from [<c0223d14>] (__make_request+0x1b8/0x308)
[<c0223d14>] (__make_request+0x1b8/0x308) from [<c02215ac>] (generic_make_request+0x4dc/0x558)
[<c02215ac>] (generic_make_request+0x4dc/0x558) from [<c022173c>] (submit_bio+0x114/0x138)
[<c022173c>] (submit_bio+0x114/0x138) from [<c011f504>] (submit_bh+0x148/0x16c)
[<c011f504>] (submit_bh+0x148/0x16c) from [<c0121ed8>] (__sync_dirty_buffer+0x88/0xd8)
[<c0121ed8>] (__sync_dirty_buffer+0x88/0xd8) from [<c01aff78>] (journal_commit_transaction+0x1198/0x1688)
[<c01aff78>] (journal_commit_transaction+0x1198/0x1688) from [<c01b4034>] (kjournald+0xb4/0x224)
[<c01b4034>] (kjournald+0xb4/0x224) from [<c0069ea0>] (kthread+0x8c/0x94)
[<c0069ea0>] (kthread+0x8c/0x94) from [<c00137f8>] (kernel_thread_exit+0x0/0x8)

Fix this by just using raw_smp_processor_id(), it's just a hint
after all. There's no pinning of the CPU or accessing per-cpu
structures involved.

Reported-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-07-26 15:01:15 +02:00
Linus Torvalds 8ded371f81 Merge branch 'for-3.1/drivers' of git://git.kernel.dk/linux-block
* 'for-3.1/drivers' of git://git.kernel.dk/linux-block:
  cciss: do not attempt to read from a write-only register
  xen/blkback: Add module alias for autoloading
  xen/blkback: Don't let in-flight requests defer pending ones.
  bsg: fix address space warning from sparse
  bsg: remove unnecessary conditional expressions
  bsg: fix bsg_poll() to return POLLOUT properly
2011-07-25 10:38:18 -07:00
Linus Torvalds 096a705bbc Merge branch 'for-3.1/core' of git://git.kernel.dk/linux-block
* 'for-3.1/core' of git://git.kernel.dk/linux-block: (24 commits)
  block: strict rq_affinity
  backing-dev: use synchronize_rcu_expedited instead of synchronize_rcu
  block: fix patch import error in max_discard_sectors check
  block: reorder request_queue to remove 64 bit alignment padding
  CFQ: add think time check for group
  CFQ: add think time check for service tree
  CFQ: move think time check variables to a separate struct
  fixlet: Remove fs_excl from struct task.
  cfq: Remove special treatment for metadata rqs.
  block: document blk_plug list access
  block: avoid building too big plug list
  compat_ioctl: fix make headers_check regression
  block: eliminate potential for infinite loop in blkdev_issue_discard
  compat_ioctl: fix warning caused by qemu
  block: flush MEDIA_CHANGE from drivers on close(2)
  blk-throttle: Make total_nr_queued unsigned
  block: Add __attribute__((format(printf...) and fix fallout
  fs/partitions/check.c: make local symbols static
  block:remove some spare spaces in genhd.c
  block:fix the comment error in blkdev.h
  ...
2011-07-25 10:33:36 -07:00
Dan Williams 5757a6d76c block: strict rq_affinity
Some systems benefit from completions always being steered to the strict
requester cpu rather than the looser "per-socket" steering that
blk_cpu_to_group() attempts by default. This is because the first
CPU in the group mask ends up being completely overloaded with work,
while the others (including the original submitter) has power left
to spare.

Allow the strict mode to be set by writing '2' to the sysfs control
file. This is identical to the scheme used for the nomerges file,
where '2' is a more aggressive setting than just being turned on.

echo 2 > /sys/block/<bdev>/queue/rq_affinity

Cc: Christoph Hellwig <hch@infradead.org>
Cc: Roland Dreier <roland@purestorage.com>
Tested-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-07-23 20:44:25 +02:00
Jens Axboe 4c64500ead block: fix patch import error in max_discard_sectors check
A '!' snuck in before the unlikely, rendering it useless.

Reported-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-07-23 20:34:59 +02:00
Linus Torvalds d4e06701b8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (77 commits)
  [SCSI] fix crash in scsi_dispatch_cmd()
  [SCSI] sr: check_events() ignore GET_EVENT when TUR says otherwise
  [SCSI] bnx2i: Fixed kernel panic due to illegal usage of sc->request->cpu
  [SCSI] bfa: Update the driver version to 3.0.2.1
  [SCSI] bfa: Driver and BSG enhancements.
  [SCSI] bfa: Added support to query PHY.
  [SCSI] bfa: Added HBA diagnostics support.
  [SCSI] bfa: Added support for flash configuration
  [SCSI] bfa: Added support to obtain SFP info.
  [SCSI] bfa: Added support for CEE info and stats query.
  [SCSI] bfa: Extend BSG interface.
  [SCSI] bfa: FCS bug fixes.
  [SCSI] bfa: DMA memory allocation enhancement.
  [SCSI] bfa: Brocade-1860 Fabric Adapter vHBA support.
  [SCSI] bfa: Brocade-1860 Fabric Adapter PLL init fixes.
  [SCSI] bfa: Added Fabric Assigned Address(FAA) support
  [SCSI] bfa: IOC bug fixes.
  [SCSI] bfa: Enable ASIC block configuration and query.
  [SCSI] bnx2i: Updated copyright and bump version
  [SCSI] bnx2i: Modified to skip CNIC registration if iSCSI is not supported
  ...

Fix up some trivial conflicts in:
 - drivers/scsi/bnx2fc/{bnx2fc.h,bnx2fc_fcoe.c}:
	Crazy broadcom version number conflicts
 - drivers/target/tcm_fc/tfc_cmd.c
	Just trivial cleanups done on adjacent lines
2011-07-23 11:13:11 -07:00
James Bottomley bfe159a512 [SCSI] fix crash in scsi_dispatch_cmd()
USB surprise removal of sr is triggering an oops in
scsi_dispatch_command().  What seems to be happening is that USB is
hanging on to a queue reference until the last close of the upper
device, so the crash is caused by surprise remove of a mounted CD
followed by attempted unmount.

The problem is that USB doesn't issue its final commands as part of
the SCSI teardown path, but on last close when the block queue is long
gone.  The long term fix is probably to make sr do the teardown in the
same way as sd (so remove all the lower bits on ejection, but keep the
upper disk alive until last close of user space).  However, the
current oops can be simply fixed by not allowing any commands to be
sent to a dead queue.

Cc: stable@kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-21 14:21:18 -07:00
Lai Jiangshan 57bdfbf9ee block,rcu: Convert call_rcu(disk_free_ptbl_rcu_cb) to kfree_rcu()
The rcu callback disk_free_ptbl_rcu_cb() just calls a kfree(),
so we use kfree_rcu() instead of the call_rcu(disk_free_ptbl_rcu_cb).

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-07-20 14:10:13 -07:00
Shaohua Li 7700fc4f67 CFQ: add think time check for group
Currently when the last queue of a group has no request, we don't expire
the queue to hope request from the group comes soon, so the group doesn't
miss its share. But if the think time is big, the assumption isn't correct
and we just waste bandwidth. In such case, we don't do idle.

[global]
runtime=30
direct=1

[test1]
cgroup=test1
cgroup_weight=1000
rw=randread
ioengine=libaio
size=500m
runtime=30
directory=/mnt
filename=file1
thinktime=9000

[test2]
cgroup=test2
cgroup_weight=1000
rw=randread
ioengine=libaio
size=500m
runtime=30
directory=/mnt
filename=file2

	patched		base
test1	64k		39k
test2	548k		540k
total	604k		578k

group1 gets much better throughput because it waits less time.

To check if the patch changes behavior of queue without think time. I also
tried to give test1 2ms think time or no think time. The test result is stable.
The thoughput doesn't change with/without the patch.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-07-12 14:24:56 +02:00
Shaohua Li f5f2b6ceb2 CFQ: add think time check for service tree
Currently when the last queue of a service tree has no request, we don't
expire the queue to hope request from the service tree comes soon, so the
service tree doesn't miss its share. But if the think time is big, the
assumption isn't correct and we just waste bandwidth. In such case, we
don't do idle.

[global]
runtime=10
direct=1

[test1]
rw=randread
ioengine=libaio
size=500m
directory=/mnt
filename=file1
thinktime=9000

[test2]
rw=read
ioengine=libaio
size=1G
directory=/mnt
filename=file2

	patched		base
test1	41k/s		33k/s
test2	15868k/s	15789k/s
total	15902k/s	15817k/s

A slightly better

To check if the patch changes behavior of queue without think time. I also
tried to give test1 2ms think time or no think time. The test has variation
even without the patch, but the average throughput doesn't change with/without
the patch.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-07-12 14:24:55 +02:00
Shaohua Li 383cd7213f CFQ: move think time check variables to a separate struct
Move the variables to do think time check to a sepatate struct. This is
to prepare adding think time check for service tree and group. No
functional change.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-07-12 14:24:35 +02:00
Justin TerAvest 4aede84b33 fixlet: Remove fs_excl from struct task.
fs_excl is a poor man's priority inheritance for filesystems to hint to
the block layer that an operation is important. It was never clearly
specified, not widely adopted, and will not prevent starvation in many
cases (like across cgroups).

fs_excl was introduced with the time sliced CFQ IO scheduler, to
indicate when a process held FS exclusive resources and thus needed
a boost.

It doesn't cover all file systems, and it was never fully complete.
Lets kill it.

Signed-off-by: Justin TerAvest <teravest@google.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-07-12 08:35:10 +02:00
Justin TerAvest a07405b780 cfq: Remove special treatment for metadata rqs.
There is no consistency among filesystems from what bios (or requests)
are marked as being metadata. It's interesting to expose this in traces,
but we shouldn't schedule the requests differently based on whether or
not they're marked as being metadata.

Signed-off-by: Justin TerAvest <teravest@google.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-07-10 22:09:19 +02:00
Shaohua Li 55c022bbdd block: avoid building too big plug list
When I test fio script with big I/O depth, I found the total throughput drops
compared to some relative small I/O depth. The reason is the thread accumulates
big requests in its plug list and causes some delays (surely this depends
on CPU speed).
I thought we'd better have a threshold for requests. When a threshold reaches,
this means there is no request merge and queue lock contention isn't severe
when pushing per-task requests to queue, so the main advantages of blk plug
don't exist. We can force a plug list flush in this case.
With this, my test throughput actually increases and almost equals to small
I/O depth. Another side effect is irq off time decreases in blk_flush_plug_list()
for big I/O depth.
The BLK_MAX_REQUEST_COUNT is choosen arbitarily, but 16 is efficiently to
reduce lock contention to me. But I'm open here, 32 is ok in my test too.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-07-08 08:19:20 +02:00
Mike Snitzer 0f79960391 block: eliminate potential for infinite loop in blkdev_issue_discard
Due to the recently identified overflow in read_capacity_16() it was
possible for max_discard_sectors to be zero but still have discards
enabled on the associated device's queue.

Eliminate the possibility for blkdev_issue_discard to infinitely loop.

Interestingly this issue wasn't identified until a device, whose
discard_granularity was 0 due to read_capacity_16 overflow, was consumed
by blk_stack_limits() to construct limits for a higher-level DM
multipath device.  The multipath device's resulting limits never had the
discard limits stacked because blk_stack_limits() will only do so if
the bottom device's discard_granularity != 0.  This resulted in the
multipath device's limits.max_discard_sectors being 0.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-07-06 21:32:02 +02:00
Johannes Stezenbach 390192b300 compat_ioctl: fix warning caused by qemu
On Linux x86_64 host with 32bit userspace, running
qemu or even just "qemu-img create -f qcow2 some.img 1G"
causes a kernel warning:

ioctl32(qemu-img:5296): Unknown cmd fd(3) cmd(00005326){t:'S';sz:0} arg(7fffffff) on some.img
ioctl32(qemu-img:5296): Unknown cmd fd(3) cmd(801c0204){t:02;sz:28} arg(fff77350) on some.img

ioctl 00005326 is CDROM_DRIVE_STATUS,
ioctl 801c0204 is FDGETPRM.

The warning appears because the Linux compat-ioctl handler for these
ioctls only applies to block devices, while qemu also uses the ioctls on
plain files.

Signed-off-by: Johannes Stezenbach <js@sig21.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-07-01 22:32:26 +02:00
Tejun Heo 85ef06d1d2 block: flush MEDIA_CHANGE from drivers on close(2)
Currently, only open(2) is defined as the 'clearing' point.  It has
two roles - first, it's an acknowledgement from userland indicating
that the event has been received and kernel can clear pending states
and proceed to generate more events.  Secondly, it's passed on to
device drivers as a hint indicating that a synchronization point has
been reached and it might want to take a deeper look at the device.

The latter currently is only used by sr which uses two different
mechanisms - GET_EVENT_MEDIA_STATUS_NOTIFICATION and TEST_UNIT_READY
to discover events, where the former is lighter weight and safe to be
used repeatedly but may not provide full coverage.  Among other
things, GET_EVENT can't detect media removal while TUR can.

This patch makes close(2) - blkdev_put() - indicate clearing hint for
MEDIA_CHANGE to drivers.  disk_check_events() is renamed to
disk_flush_events() and updated to take @mask for events to flush
which is or'd to ev->clearing and will be passed to the driver on the
next ->check_events() invocation.

This change makes sr generate MEDIA_CHANGE when media is ejected from
userland - e.g. with eject(1).

Note: Given the current usage, it seems @clearing hint is needlessly
complex.  disk_clear_events() can simply clear all events and the hint
can be boolean @flush.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-07-01 16:17:47 +02:00
Jens Axboe 04bf7869ca Merge branch 'for-linus' into for-3.1/core
Conflicts:
	block/blk-throttle.c
	block/cfq-iosched.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-07-01 16:17:13 +02:00
Shaohua Li 726e99ab88 cfq-iosched: make code consistent
ioc->ioc_data is rcu protectd, so uses correct API to access it.
This doesn't change any behavior, but just make code consistent.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Cc: stable@kernel.org # after ab4bd22d
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-06-27 09:36:06 +02:00
Shaohua Li 3181faa85b cfq-iosched: fix a rcu warning
I got a rcu warnning at boot. the ioc->ioc_data is rcu_deferenced, but
doesn't hold rcu_read_lock.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Cc: stable@kernel.org # after ab4bd22d
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-06-27 09:36:06 +02:00
Namhyung Kim 2b727c6300 bsg: fix address space warning from sparse
copy_from/to_user() and blk_rq_map_user() want __user pointer.
This patch fixes following warnings from sparse:

   CHECK   block/bsg.c
 block/bsg.c:185:38: warning: incorrect type in argument 2 (different address spaces)
 block/bsg.c:185:38:    expected void const [noderef] <asn:1>*from
 block/bsg.c:185:38:    got void *<noident>
 block/bsg.c:295:58: warning: incorrect type in argument 4 (different address spaces)
 block/bsg.c:295:58:    expected void [noderef] <asn:1>*<noident>
 block/bsg.c:295:58:    got void *[assigned] dxferp
 block/bsg.c:311:52: warning: incorrect type in argument 4 (different address spaces)
 block/bsg.c:311:52:    expected void [noderef] <asn:1>*<noident>
 block/bsg.c:311:52:    got void *[assigned] dxferp
 block/bsg.c:448:37: warning: incorrect type in argument 1 (different address spaces)
 block/bsg.c:448:37:    expected void [noderef] <asn:1>*dst
 block/bsg.c:448:37:    got void *<noident>

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-06-20 13:27:45 +02:00
Namhyung Kim 44194e3e88 bsg: remove unnecessary conditional expressions
Second condition in OR always implies first condition is false
thus bytes_read in the second is not needed. The same goes to
bytes_written.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-06-20 13:27:44 +02:00
Namhyung Kim 80ceb05713 bsg: fix bsg_poll() to return POLLOUT properly
POLLOUT should be returned only if bd->queued_cmds < bd->max_queue
so that bsg_alloc_command() can proceed.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-06-20 13:27:44 +02:00
Joe Perches d2f31a5fd6 blk-throttle: Make total_nr_queued unsigned
The total of two unsigned values should also be unsigned.

Update throtl_log output to unsigned.
Update total_nr_queued test to non-zero to be the
same as the other total_nr_queued tests.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-06-13 20:19:27 +02:00
Joe Perches fd16d26319 block: Add __attribute__((format(printf...) and fix fallout
Use the compiler to verify format strings and arguments.

Fix fallout.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-06-13 20:18:49 +02:00
Wanlong Gao 9f5e486550 block:remove some spare spaces in genhd.c
Remove the end-of-line spaces in genhd.c.

Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-06-13 10:45:43 +02:00
Joe Perches 08e8138ade block: Add __attribute__((format(printf...) and fix fallout
Use the compiler to verify format strings and arguments.

Fix fallout.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-06-13 10:42:49 +02:00
Tejun Heo fdd514e16b block: make disk_block_events() properly wait for work cancellation
disk_block_events() should guarantee that the event work is not in
flight on return and once blocked it shouldn't issue further
cancellations.

Because there was no synchronization between the first blocker doing
cancel_delayed_work_sync() and the following blockers, the following
blockers could finish before cancellation was complete, which broke
both guarantees - event work could be in flight and cancellation could
happen after return.

This bug triggered WARN_ON_ONCE() in disk_clear_events() reported in
bug#34662.

  https://bugzilla.kernel.org/show_bug.cgi?id=34662

Fix it by adding an outer mutex which protects both block count
manipulation and work cancellation.

-v2: Use outer mutex instead of bit waitqueue per Linus.

Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Reported-by: Borislav Petkov <bp@alien8.de>
Reported-by: Meelis Roos <mroos@linux.ee>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-06-09 20:43:59 +02:00
Tejun Heo c3af54afba block: remove non-syncing __disk_block_events() and fold it into disk_block_events()
After the previous update to disk_check_events(), nobody is using
non-syncing __disk_block_events().  Remove @sync and, as this makes
__disk_block_events() virtually identical to disk_block_events(),
remove the underscore prefixed version.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-06-09 20:43:55 +02:00
Tejun Heo a9dce2a3b4 block: don't use non-syncing event blocking in disk_check_events()
This patch is part of fix for triggering of WARN_ON_ONCE() in
disk_clear_events() reported in bug#34662.

  https://bugzilla.kernel.org/show_bug.cgi?id=34662

disk_clear_events() blocks events, schedules and flushes the event
work.  It expects the work to have started execution on schedule and
finished on return from flush.  WARN_ON_ONCE() triggers if the event
work hasn't executed as expected.  This problem happens because
__disk_block_events() fails to guarantee that the event work item is
not in flight on return from the function in race-free manner.  The
problem is two-fold and this patch addresses one of them.

When __disk_block_events() is called with @sync == %false, it bumps
event block count, calls cancel_delayed_work() and return.  This makes
it impossible to guarantee that event polling is not in flight on
return from syncing __disk_block_events() - if the first blocker was
non-syncing, polling could still be in progress and later syncing ones
would assume that the first blocker already canceled it.

Making __disk_block_events() cancel_sync regardless of block count
isn't feasible either as it may race with forced event checking in
disk_clear_events().

As disk_check_events() is the only user of non-syncing
__disk_block_events(), updating it to directly cancel and schedule
event work is the easiest way to solve the issue.

Note that there's another bug in __disk_block_events() and this patch
doesn't fix the issue completely.  Later patch will fix the other bug.

Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Reported-by: Borislav Petkov <bp@alien8.de>
Reported-by: Meelis Roos <mroos@linux.ee>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-06-09 20:43:54 +02:00
Paul Bolle df4156569d block: rename the return of two functions
If we rename the return of alloc_io_context() and get_io_context() from
"ret" to "ioc" the code get's (a bit) more readable and (a lot) more
grepable.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-06-06 05:57:25 +02:00
Paul Bolle 8aea45451b CFQ: make two functions static
Correctly suggested by sparse.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-06-06 05:57:25 +02:00
Jens Axboe 9b50902db5 cfq-iosched: fix locking around ioc->ioc_data assignment
Since we are modifying this RCU pointer, we need to hold
the lock protecting it around it.

This fixes a potential reuse and double free of a cfq
io_context structure. The bug has been in CFQ for a long
time, it hit very few people but those it did hit seemed
to see it a lot.

Tracked in RH bugzilla here:

https://bugzilla.redhat.com/show_bug.cgi?id=577968

Credit goes to Paul Bolle for figuring out that the issue
was around the one-hit ioc->ioc_data cache. Thanks to his
hard work the issue is now fixed.

Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-06-06 05:57:21 +02:00
Jens Axboe ab4bd22d3c cfq-iosched: fix locking around ioc->ioc_data assignment
Since we are modifying this RCU pointer, we need to hold
the lock protecting it around it.

This fixes a potential reuse and double free of a cfq
io_context structure. The bug has been in CFQ for a long
time, it hit very few people but those it did hit seemed
to see it a lot.

Tracked in RH bugzilla here:

https://bugzilla.redhat.com/show_bug.cgi?id=577968

Credit goes to Paul Bolle for figuring out that the issue
was around the one-hit ioc->ioc_data cache. Thanks to his
hard work the issue is now fixed.

Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-06-06 05:56:49 +02:00
Jeff Moyer 796d5116c4 iosched: prevent aliased requests from starving other I/O
Hi, Jens,

If you recall, I posted an RFC patch for this back in July of last year:
http://lkml.org/lkml/2010/7/13/279

The basic problem is that a process can issue a never-ending stream of
async direct I/Os to the same sector on a device, thus starving out
other I/O in the system (due to the way the alias handling works in both
cfq and deadline).  The solution I proposed back then was to start
dispatching from the fifo after a certain number of aliases had been
dispatched.  Vivek asked why we had to treat aliases differently at all,
and I never had a good answer.  So, I put together a simple patch which
allows aliases to be added to the rb tree (it adds them to the right,
though that doesn't matter as the order isn't guaranteed anyway).  I
think this is the preferred solution, as it doesn't break up time slices
in CFQ or batches in deadline.  I've tested it, and it does solve the
starvation issue.  Let me know what you think.

Cheers,
Jeff

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-06-02 21:19:05 +02:00
Paul Bolle e2bd9678fc block: Use hlist_entry() for io_context.cic_list.first
list_entry() and hlist_entry() are both simply aliases for
container_of(), but since io_context.cic_list.first is an hlist_node one
should at least use the correct alias.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-06-02 13:05:02 +02:00
Paul Bolle 28304f485c cfq-iosched: Remove bogus check in queue_fail path
queue_fail can only be reached if cic is NULL, so its check for cic must
be bogus.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-06-02 13:05:02 +02:00
Kyungmin Park 4495a7d41d CFQ: Fix typo and remove unnecessary semicolon
Fix comment typo and remove unnecessary semicolon at macro

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-31 19:49:44 +02:00
Linus Torvalds bdf7cf1c83 Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  loop: export module parameters
  block: export blk_{get,put}_queue()
  block: remove unused variable in bio_attempt_front_merge()
  block: always allocate genhd->ev if check_events is implemented
  brd: export module parameters
  brd: fix comment on initial device creation
  brd: handle on-demand devices correctly
  brd: limit 'max_part' module param to DISK_MAX_PARTS
  brd: get rid of unused members from struct brd_device
  block: fix oops on !disk->queue and sysfs discard alignment display
2011-05-27 10:24:40 -07:00
Jens Axboe d86e0e83b3 block: export blk_{get,put}_queue()
We need them in SCSI to fix a bug, but currently they are not
exported to modules. Export them.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-27 07:45:45 +02:00
Ben Blum f780bdb7c1 cgroups: add per-thread subsystem callbacks
Add cgroup subsystem callbacks for per-thread attachment in atomic contexts

Add can_attach_task(), pre_attach(), and attach_task() as new callbacks
for cgroups's subsystem interface.  Unlike can_attach and attach, these
are for per-thread operations, to be called potentially many times when
attaching an entire threadgroup.

Also, the old "bool threadgroup" interface is removed, as replaced by
this.  All subsystems are modified for the new interface - of note is
cpuset, which requires from/to nodemasks for attach to be globally scoped
(though per-cpuset would work too) to persist from its pre_attach to
attach_task and attach.

This is a pre-patch for cgroup-procs-writable.patch.

Signed-off-by: Ben Blum <bblum@andrew.cmu.edu>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Reviewed-by: Paul Menage <menage@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26 17:12:34 -07:00
Luca Tettamanti 700c4f3325 block: remove unused variable in bio_attempt_front_merge()
sector is never read inside the function.

Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-26 21:07:26 +02:00
Tejun Heo 75e3f3ee3c block: always allocate genhd->ev if check_events is implemented
9fd097b149 (block: unexport DISK_EVENT_MEDIA_CHANGE for legacy/fringe
drivers) removed DISK_EVENT_MEDIA_CHANGE from legacy/fringe block
drivers which have inadequate ->check_events().  Combined with earlier
change 7c88a168da (block: don't propagate unlisted DISK_EVENTs to
userland), this enables using ->check_events() for internal processing
while avoiding enabling in-kernel block event polling which can lead
to infinite event loop.

Unfortunately, this made many drivers including floppy without any bit
set in disk->events and ->async_events in which case disk_add_events()
simply skipped allocation of disk->ev, which disables whole event
handling.  As ->check_events() is still used during open processing
for revalidation, this can lead to open failure.

This patch always allocates disk->ev if ->check_events is implemented.
In the long term, it would make sense to simply include the event
structure inline into genhd as it's now used by virtually all block
devices.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ondrej Zary <linux@rainbow-software.org>
Reported-by: Alex Villacis Lasso <avillaci@ceibo.fiec.espol.edu.ec>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-26 21:06:50 +02:00
Namhyung Kim 1547010e6e cfq-iosched: free cic_index if cfqd allocation fails
When struct cfq_data allocation fails, cic_index need to be freed.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-24 10:23:22 +02:00
Namhyung Kim 20359f27e8 cfq-iosched: remove unused 'group_changed' in cfq_service_tree_add()
The 'group_changed' variable is initialized to 0 and never changed, so
checking the variable is meaningless.

It is a leftover from 0bbfeb8320 ("cfq-iosched: Always provide group
iosolation."). Let's get rid of it.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Justin TerAvest <teravest@google.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-24 10:23:22 +02:00
Namhyung Kim 229836bd63 cfq-iosched: reduce bit operations in cfq_choose_req()
Reduce the number of bit operations in cfq_choose_req() on average
(and worst) cases.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-24 10:23:21 +02:00
Namhyung Kim b9f8ce0599 cfq-iosched: algebraic simplification in cfq_prio_to_maxrq()
Simplify the calculation in cfq_prio_to_maxrq(), plus replace CFQ_PRIO_LISTS to
IOPRIO_BE_NR since they are the same and IOPRIO_BE_NR looks more reasonable in
this context IMHO.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-24 10:23:21 +02:00
Vivek Goyal 4cbadbd16e blk-cgroup: Initialize ioc->cgroup_changed at ioc creation time
If we don't explicitly initialize it to zero, CFQ might think that
cgroup of ioc has changed and it generates lots of unnecessary calls
to call_for_each_cic(changed_cgroup). Fix it.

cfq_get_io_context()
  cfq_ioc_set_cgroup()
     call_for_each_cic(ioc, changed_cgroup)

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-23 19:35:04 +02:00
Vivek Goyal 95cf3dd9db block: call elv_bio_merged() when merged
Commit 73c1010119 ("block: initial patch for on-stack per-task plugging")
removed calls to elv_bio_merged() when @bio merged with @req. Re-add them.

This in turn will update merged stats in associated group. That
should be safe as long as request has got reference to the blkio_group.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Divyesh Shah <dpshah@google.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-23 10:02:19 +02:00
Vivek Goyal 317389a773 cfq-iosched: Make IO merge related stats per cpu
Make BLKIO_STAT_MERGED per cpu hence gettring rid of need of taking
blkg->stats_lock.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-23 10:02:19 +02:00
Vivek Goyal 2abae55f5a cfq-iosched: Fix a memory leak of per cpu stats for root group
We allocated per cpu stats struct for root group but did not free it.
Fix it.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-23 10:02:19 +02:00
Jens Axboe 771949d03b block: get rid of on-stack plugging debug checks
We don't need them anymore, so kill:

- REQ_ON_PLUG checks in various places
- !rq_mergeable() check in plug merging

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:52:16 +02:00
Jens Axboe 0eb8e88572 Merge branch 'for-linus' into for-2.6.40/core
This patch merges in a fix that missed 2.6.39 final.

Conflicts:
	block/blk.h
2011-05-20 20:36:16 +02:00
Vivek Goyal af75cd3c67 blk-throttle: Make no throttling rule group processing lockless
Currently we take a queue lock on each bio to check if there are any
throttling rules associated with the group and also update the stats.
Now access the group under rcu and update the stats without taking
the queue lock. Queue lock is taken only if there are throttling rules
associated with the group.

So the common case of root group when there are no rules, save
unnecessary pounding of request queue lock.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:34:53 +02:00
Vivek Goyal f0bdc8cdd9 blk-cgroup: Make cgroup stat reset path blkg->lock free for dispatch stats
Now dispatch stats update is lock free. But reset of these stats still
takes blkg->stats_lock and is dependent on that. As stats are per cpu,
we should be able to just reset the stats on each cpu without any locks.
(Atleast for 64bit arch).

On 32bit arch there is a small race where 64bit updates are not atomic.
The result of this race can be that in the presence of other writers,
one might not get 0 value after reset of a stat and might see something
intermediate

One can write more complicated code to cover this race like sending IPI
to other cpus to reset stats and for offline cpus, reset these directly.

Right not I am not taking that path because reset_update is more of a
debug feature and it can happen only on 32bit arch and possibility of
it happening is small. Will fix it if it becomes a real problem. For
the time being going for code simplicity.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:34:53 +02:00
Vivek Goyal 575969a0dd blk-cgroup: Make 64bit per cpu stats safe on 32bit arch
Some of the stats are 64bit and updation will be non atomic on 32bit
architecture. Use sequence counters on 32bit arch to make reading
of stats safe.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:34:53 +02:00
Vivek Goyal 5624a4e445 blk-throttle: Make dispatch stats per cpu
Currently we take blkg_stat lock for even updating the stats. So even if
a group has no throttling rules (common case for root group), we end
up taking blkg_lock, for updating the stats.

Make dispatch stats per cpu so that these can be updated without taking
blkg lock.

If cpu goes offline, these stats simply disappear. No protection has
been provided for that yet. Do we really need anything for that?

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:34:52 +02:00
Vivek Goyal 4843c69d49 blk-throttle: Free up a group only after one rcu grace period
Soon we will allow accessing a throtl_grp under rcu_read_lock(). Hence
start freeing up throtl_grp after one rcu grace period.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:34:52 +02:00
Vivek Goyal 5617cbef77 blk-throttle: Use helper function to add root throtl group to lists
Use same helper function for root group as we use with dynamically
allocated groups to add it to various lists.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:34:52 +02:00
Vivek Goyal 269f541555 blk-throttle: Introduce a helper function to fill in device details
A helper function for the code which is used at 2-3 places. Makes reading
code little easier.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:34:52 +02:00
Vivek Goyal 29b125892f blk-throttle: Dynamically allocate root group
Currently, we allocate root throtl_grp statically. But as we will be
introducing per cpu stat pointers and that will be allocated
dynamically even for root group, we might as well make whole root
throtl_grp allocation dynamic and treat it in same manner as other
groups.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:34:52 +02:00
Vivek Goyal f469a7b4d5 blk-cgroup: Allow sleeping while dynamically allocating a group
Currently, all the cfq_group or throtl_group allocations happen while
we are holding ->queue_lock and sleeping is not allowed.

Soon, we will move to per cpu stats and also need to allocate the
per group stats. As one can not call alloc_percpu() from atomic
context as it can sleep, we need to drop ->queue_lock, allocate the
group, retake the lock and continue processing.

In throttling code, I check the queue DEAD flag again to make sure
that driver did not call blk_cleanup_queue() in the mean time.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:34:52 +02:00
Vivek Goyal 56edf7d75d cfq-iosched: Fix a possible race with cfq cgroup removal code
blkg->key = cfqd is an rcu protected pointer and hence we used to do
call_rcu(cfqd->rcu_head) to free up cfqd after one rcu grace period.

The problem here is that even though cfqd is around, there are no
gurantees that associated request queue (td->queue) or q->queue_lock
is still around. A driver might have called blk_cleanup_queue() and
release the lock.

It might happen that after freeing up the lock we call
blkg->key->queue->queue_ock and crash. This is possible in following
path.

blkiocg_destroy()
 blkio_unlink_group_fn()
  cfq_unlink_blkio_group()

Hence, wait for an rcu peirod if there are groups which have not
been unlinked from blkcg->blkg_list. That way, if there are any groups
which are taking cfq_unlink_blkio_group() path, can safely take queue
lock.

This is how we have taken care of race in throttling logic also.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:34:52 +02:00
Vivek Goyal 3e59cf9d66 cfq-iosched: Get rid of redundant function parameter "create"
Nobody seems to be using cfq_find_alloc_cfqg() function parameter "create".
Get rid of that.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:34:52 +02:00
Vivek Goyal a23e686955 blk-cgroup: move some fields of unaccounted_time file under right config option
cgroup unaccounted_time file is created only if CONFIG_DEBUG_BLK_CGROUP=y.
there are some fields which are out side this config option. Fix that.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:34:52 +02:00
Vivek Goyal a29a171e7c blk-throttle: Do the new group initialization with the help of a function
Group initialization code seems to be at two places. root group
initialization in blk_throtl_init() and dynamically allocated group
in throtl_find_alloc_tg(). Create a common function and use at both
the places.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:34:51 +02:00
Jens Axboe 698567f3fa Merge commit 'v2.6.39' into for-2.6.40/core
Since for-2.6.40/core was forked off the 2.6.39 devel tree, we've
had churn in the core area that makes it difficult to handle
patches for eg cfq or blk-throttle. Instead of requiring that they
be based in older versions with bugs that have been fixed later
in the rc cycle, merge in 2.6.39 final.

Also fixes up conflicts in the below files.

Conflicts:
	drivers/block/paride/pcd.c
	drivers/cdrom/viocd.c
	drivers/ide/ide-cd.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:33:15 +02:00
James Bottomley 0a58e077eb block: add proper state guards to __elv_next_request
blk_cleanup_queue() calls elevator_exit() and after this, we can't
touch the elevator without oopsing.  __elv_next_request() must check
for this state because in the refcounted queue model, we can still
call it after blk_cleanup_queue() has been called.

This was reported as causing an oops attributable to scsi.

Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-18 19:30:32 +02:00
Shaohua Li 3ec717b7ca block: don't delay blk_run_queue_async
Let's check a scenario:
1. blk_delay_queue(q, SCSI_QUEUE_DELAY);
2. blk_run_queue_async();
the second one will became a noop, because q->delay_work already has
WORK_STRUCT_PENDING_BIT set, so the delayed work will still run after
SCSI_QUEUE_DELAY. But blk_run_queue_async actually hopes the delayed
work runs immediately.

Fix this by doing a cancel on potentially pending delayed work
before queuing an immediate run of the workqueue.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-18 12:24:03 +02:00
Martin K. Petersen a934a00a69 block: Fix discard topology stacking and reporting
In some cases we would end up stacking discard_zeroes_data incorrectly.
Fix this by enabling the feature by default for stacking drivers and
clearing it for low-level drivers. Incorporating a device that does not
support dzd will then cause the feature to be disabled in the stacking
driver.

Also ensure that the maximum discard value does not overflow when
exported in sysfs and return 0 in the alignment and dzd fields for
devices that don't support discard.

Reported-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-18 10:37:35 +02:00
Vivek Goyal 70087dc38c blk-throttle: Use task_subsys_state() to determine a task's blkio_cgroup
Currentlly we first map the task to cgroup and then cgroup to
blkio_cgroup. There is a more direct way to get to blkio_cgroup
from task using task_subsys_state(). Use that.

The real reason for the fix is that it also avoids a race in generic
cgroup code. During remount/umount rebind_subsystems() is called and
it can do following with and rcu protection.

cgrp->subsys[i] = NULL;

That means if somebody got hold of cgroup under rcu and then it tried
to do cgroup->subsys[] to get to blkio_cgroup, it would get NULL which
is wrong. I was running into this race condition with ltp running on a
upstream derived kernel and that lead to crash.

So ideally we should also fix cgroup generic code to wait for rcu
grace period before setting pointer to NULL. Li Zefan is not very keen
on introducing synchronize_wait() as he thinks it will slow
down moun/remount/umount operations.

So for the time being atleast fix the kernel crash by taking a more
direct route to blkio_cgroup.

One tester had reported a crash while running LTP on a derived kernel
and with this fix crash is no more seen while the test has been
running for over 6 days.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-16 15:24:08 +02:00
Lukas Czerner 8af1954d17 blkdev: Do not return -EOPNOTSUPP if discard is supported
Currently we return -EOPNOTSUPP in blkdev_issue_discard() if any of the
bio fails due to underlying device not supporting discard request.
However, if the device is for example dm device composed of devices
which some of them support discard and some of them does not, it is ok
for some bios to fail with EOPNOTSUPP, but it does not mean that discard
is not supported at all.

This commit removes the check for bios failed with EOPNOTSUPP and change
blkdev_issue_discard() to return operation not supported if and only if
the device does not actually supports it, not just part of the device as
some bios might indicate.

This change also fixes problem with BLKDISCARD ioctl() which now works
correctly on such dm devices.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
CC: Jens Axboe <jaxboe@fusionio.com>
CC: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 19:30:01 -06:00
Lukas Czerner 5baebe5c86 blkdev: Simple cleanup in blkdev_issue_zeroout()
In blkdev_issue_zeroout() we are submitting regular WRITE bios, so we do
not need to check for -EOPNOTSUPP specifically in case of error. Also
there is no need to have label submit: because there is no way to jump
out from the while cycle without an error and we really want to exit,
rather than try again. And also remove the check for (sz == 0) since at
that point sz can never be zero.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
CC: Dmitry Monakhov <dmonakhov@openvz.org>
CC: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 19:26:28 -06:00
Lukas Czerner 5dba3089ed blkdev: Submit discard bio in batches in blkdev_issue_discard()
Currently we are waiting for every submitted REQ_DISCARD bio separately,
but it can have unwanted consequences of repeatedly flushing the queue,
so we rather submit bios in batches and wait for the entire batch, hence
narrowing the window of other ios going in.

Use bio_batch_end_io() and struct bio_batch for that purpose, the same
is used by blkdev_issue_zeroout(). Also change bio_batch_end_io() so we
always set !BIO_UPTODATE in the case of error and remove the check for
bb, since we are the only user of this function and we always set this.

Remove bio_get()/bio_put() from the blkdev_issue_discard() since
bio_alloc() and bio_batch_end_io() is doing the same thing, hence it is
not needed anymore.

I have done simple dd testing with surprising results. The script I have
used is:

for i in $(seq 10); do
        echo $i
        dd if=/dev/sdb1 of=/dev/sdc1 bs=4k &
        sleep 5
done
/usr/bin/time -f %e ./blkdiscard /dev/sdc1

Running time of BLKDISCARD on the whole device:
with patch              without patch
0.95                    15.58

So we can see that in this artificial test the kernel with the patch
applied is approx 16x faster in discarding the device.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
CC: Dmitry Monakhov <dmonakhov@openvz.org>
CC: Jens Axboe <jaxboe@fusionio.com>
CC: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 19:26:27 -06:00
shaohua.li@intel.com 3ac0cc4508 block: hold queue if flush is running for non-queueable flush drive
In some drives, flush requests are non-queueable. When flush request is
running, normal read/write requests can't run. If block layer dispatches
such request, driver can't handle it and requeue it.  Tejun suggested we
can hold the queue when flush is running. This can avoid unnecessary
requeue.  Also this can improve performance. For example, we have
request flush1, write1, flush 2. flush1 is dispatched, then queue is
hold, write1 isn't inserted to queue. After flush1 is finished, flush2
will be dispatched. Since disk cache is already clean, flush2 will be
finished very soon, so looks like flush2 is folded to flush1.

In my test, the queue holding completely solves a regression introduced by
commit 53d63e6b0dfb95882ec0219ba6bbd50cde423794:

    block: make the flush insertion use the tail of the dispatch list

    It's not a preempt type request, in fact we have to insert it
    behind requests that do specify INSERT_FRONT.

which causes about 20% regression running a sysbench fileio
workload.

Stable: 2.6.39 only

Cc: stable@kernel.org
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 11:36:25 -06:00
shaohua.li@intel.com f387693095 block: add a non-queueable flush flag
flush request isn't queueable in some drives. Add a flag to let driver
notify block layer about this. We can optimize flush performance with the
knowledge.

Stable: 2.6.39 only

Cc: stable@kernel.org
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 11:36:25 -06:00
Kees Cook 490b94be02 iosched: remove redundant sprintf
After the anticipatory scheduler was dropped, there was no need to
special-case the request_module string. As such, drop the redundant
sprintf and stack variable.

Signed-off-by: Kees Cook <kees.cook@canonical.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-05 18:02:12 -06:00
Tao Ma addd0a09fc block: Remove 'plug/unplug' comment in blk_execute_rq_nowait
unplug is replaced with blk_run_queue now in blk_execute_rq_nowait,
so change the comment accordingly.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-05 15:10:05 -06:00
Tejun Heo 7c88a168da block: don't propagate unlisted DISK_EVENTs to userland
DISK_EVENT_MEDIA_CHANGE is used for both userland visible event and
internal event for revalidation of removeable devices.  Some legacy
drivers don't implement proper event detection and continuously
generate events under certain circumstances.  For example, ide-cd
generates media changed continuously if there's no media in the drive,
which can lead to infinite loop of events jumping back and forth
between the driver and userland event handler.

This patch updates disk event infrastructure such that it never
propagates events not listed in disk->events to userland.  Those
events are processed the same for internal purposes but uevent
generation is suppressed.

This also ensures that userland only gets events which are advertised
in the @events sysfs node lowering risk of confusion.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-21 19:43:58 +02:00
Jens Axboe 3aa72873ff elevator: check for ELEVATOR_INSERT_SORT_MERGE in !elvpriv case too
The sort insert is the one that goes to the IO scheduler. With
the SORT_MERGE addition, we could bypass IO scheduler setup
but still ask the IO scheduler to insert the request. This would
cause an oops on switching IO schedulers through the sysfs
interface, unless the disk just happened to be idle while it
occured.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-21 19:28:35 +02:00
Tao Ma 60735b6362 block: Remove the extra check in queue_requests_store
In queue_requests_store, the code looks like
	if (rl->count[BLK_RW_SYNC] >= q->nr_requests) {
		blk_set_queue_full(q, BLK_RW_SYNC);
	} else if (rl->count[BLK_RW_SYNC]+1 <= q->nr_requests) {
		blk_clear_queue_full(q, BLK_RW_SYNC);
		wake_up(&rl->wait[BLK_RW_SYNC]);
	}
If we don't satify the situation of "if", we can get that
rl->count[BLK_RW_SYNC} < q->nr_quests. It is the same as
rl->count[BLK_RW_SYNC]+1 <= q->nr_requests.
All the "else" should satisfy the "else if" check so it isn't
needed actually.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-19 13:51:53 +02:00
Liu Yuan ed5302d3c2 block, blk-sysfs: Fix an err return path in blk_register_queue()
We do not call blk_trace_remove_sysfs() in err return path
if kobject_add() fails. This path fixes it.

Cc: stable@kernel.org
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-19 13:51:53 +02:00
Jens Axboe d350e6b6e8 block: remove stale kerneldoc member from __blk_run_queue()
We don't pass in a 'force_kblockd' anymore, get rid of the
stsale comment.

Reported-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-19 13:34:14 +02:00
Jens Axboe c21e6beba8 block: get rid of QUEUE_FLAG_REENTER
We are currently using this flag to check whether it's safe
to call into ->request_fn(). If it is set, we punt to kblockd.
But we get a lot of false positives and excessive punts to
kblockd, which hurts performance.

The only real abuser of this infrastructure is SCSI. So export
the async queue run and convert SCSI over to use that. There's
room for improvement in that SCSI need not always use the async
call, but this fixes our performance issue and they can fix that
up in due time.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-19 13:32:46 +02:00
Jens Axboe 5f45c69589 cfq-iosched: read_lock() does not always imply rcu_read_lock()
For some configurations of CONFIG_PREEMPT that is not true. So
get rid of __call_for_each_cic() and always uses the explicitly
rcu_read_lock() protected call_for_each_cic() instead.

This fixes a potential bug related to IO scheduler removal or
online switching.

Thanks to Paul McKenney for clarifying this.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-19 09:10:35 +02:00
Jens Axboe bd900d4580 block: kill blk_flush_plug_list() export
With all drivers and file systems converted, we only have
in-core use of this function. So remove the export.

Reporteed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-18 22:06:57 +02:00
Christoph Hellwig 24ecfbe27f block: add blk_run_queue_async
Instead of overloading __blk_run_queue to force an offload to kblockd
add a new blk_run_queue_async helper to do it explicitly.  I've kept
the blk_queue_stopped check for now, but I suspect it's not needed
as the check we do when the workqueue items runs should be enough.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-18 11:41:33 +02:00
Jens Axboe 4521cc4ed5 block: blk_delay_queue() should use kblockd workqueue
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-18 11:36:39 +02:00
Jens Axboe 99e22598e9 block: drop queue lock before calling __blk_run_queue() for kblockd punt
If we know we are going to punt to kblockd, we can drop the queue
lock before calling into __blk_run_queue() since it only does a
safe bit test and a workqueue call. Since kblockd needs to grab
this very lock as one of the first things it does, it's a good
optimization to drop the lock before waking kblockd.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-18 09:59:55 +02:00
Jens Axboe b4cb290e0a Revert "block: add callback function for unplug notification"
MD can't use this since it really requires us to be able to
keep more than a single piece of state for the unplug. Commit
048c9374 added the required support for MD, so get rid of this
now unused code.

This reverts commit f75664570d.

Conflicts:

	block/blk-core.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-18 09:54:05 +02:00
NeilBrown 048c9374a7 block: Enhance new plugging support to support general callbacks
md/raid requires an unplug callback, but as it does not uses
requests the current code cannot provide one.

So allow arbitrary callbacks to be attached to the blk_plug.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-18 09:52:22 +02:00
Jens Axboe 49cac01e1f block: make unplug timer trace event correspond to the schedule() unplug
It's a pretty close match to what we had before - the timer triggering
would mean that nobody unplugged the plug in due time, in the new
scheme this matches very closely what the schedule() unplug now is.
It's essentially the difference between an explicit unplug (IO unplug)
or an implicit unplug (timer unplug, we scheduled with pending IO
queued).

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-16 13:51:05 +02:00
Jens Axboe f6603783f9 block: only force kblockd unplugging from the schedule() path
For the explicit unplugging, we'd prefer to kick things off
immediately and not pay the penalty of the latency to switch
to kblockd. So let blk_finish_plug() do the run inline, while
the implicit-on-schedule-out unplug will punt to kblockd.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-15 15:49:07 +02:00
Christoph Hellwig 88b996cd06 block: cleanup the block plug helper functions
It's a bit of a mess currently. task->plug is being cleared
and reset in __blk_finish_plug(), and blk_finish_plug() is
testing for a NULL plug which cannot happen even from schedule()
anymore since it uses blk_needs_flush_plug() to determine
whether to call into this function at all.

So get rid of some of the cruft.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-15 15:20:10 +02:00
Liu Yuan 80656b67b3 block, blk-sysfs: Use the variable directly instead of a function call
In the function blk_register_queue(), var _dev_ is already assigned by
disk_to_dev().So use it directly instead of calling disk_to_dev() again.

Signed-off-by: Liu Yuan <tailai.ly@taobao.com>

Modified by me to delete an empty line in the same function while
in there anyway.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-13 22:14:54 +02:00
Jens Axboe f4af3c3d07 block: move queue run on unplug to kblockd
There are worries that we are now consuming a lot more stack in
some cases, since we potentially call into IO dispatch from
schedule() or io_schedule(). We can reduce this problem by moving
the running of the queue to kblockd, like the old plugging scheme
did as well.

This may or may not be a good idea from a performance perspective,
depending on how many tasks have queue plugs running at the same
time. For even the slightly contended case, doing just a single
queue run from kblockd instead of multiple runs directly from the
unpluggers will be faster.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-12 14:58:51 +02:00
Jens Axboe cf82c79839 block: kill queue_sync_plugs()
The original use for this dates back to when we had to track write
requests for serializing around barriers. That's not needed anymore,
so kill it.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-12 10:30:53 +02:00
Jens Axboe dc6d36c971 block: readd plug trace event
This was removed with the queue plug state. But we can easily readd
by checking if this is the first request going to this queue. It's
good information to have when tracing to see how effective the
plugging is.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-12 10:28:28 +02:00
Jens Axboe f75664570d block: add callback function for unplug notification
MD would like to know when a queue is unplugged, so it can flush
it's bitmap writes. Add such a callback.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-12 10:17:31 +02:00
Jens Axboe 188112722c block: add comment on why we save and disable interrupts in flush_plug_list()
It's done at the top to avoid doing it for every queue we unplug.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-12 10:12:29 +02:00
Jens Axboe 94b5eb28b4 block: fixup block IO unplug trace call
It was removed with the on-stack plugging, readd it and track the
depth of requests added when flushing the plug.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-12 10:12:19 +02:00
NeilBrown 109b81296c block: splice plug list to local context
If the request_fn ends up blocking, we could be re-entering
the plug flush. Since the list is protected by explicitly
not allowing schedule events, this isn't a terribly good idea.

Additionally, it can cause us to recurse. As request_fn called by
__blk_run_queue is allowed to 'schedule()' (after dropping the queue
lock of course), it is possible to get a recursive call:

 schedule -> blk_flush_plug -> __blk_finish_plug -> flush_plug_list
      -> __blk_run_queue -> request_fn -> schedule

We must make sure that the second schedule does not call into
blk_flush_plug again.  So instead of leaving the list of requests on
blk_plug->list, move them to a separate list leaving blk_plug->list
empty.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-11 14:13:10 +02:00
Linus Torvalds 42933bac11 Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6:
  Fix common misspellings
2011-04-07 11:14:49 -07:00
Konstantin Khlebnikov f83e826181 block: fix request sorting at unplug
Comparison function for list_sort() must be anticommutative,
otherwise it is not sorting in ordinary meaning.

But fortunately list_sort() always check ((*cmp)(priv, a, b) <= 0)
it not distinguish negative and zero, so comparison function can
implement only less-or-equal instead of full three-way comparison.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-05 23:52:49 +02:00
Mike Snitzer a63a5cf84d dm: improve block integrity support
The current block integrity (DIF/DIX) support in DM is verifying that
all devices' integrity profiles match during DM device resume (which
is past the point of no return).  To some degree that is unavoidable
(stacked DM devices force this late checking).  But for most DM
devices (which aren't stacking on other DM devices) the ideal time to
verify all integrity profiles match is during table load.

Introduce the notion of an "initialized" integrity profile: a profile
that was blk_integrity_register()'d with a non-NULL 'blk_integrity'
template.  Add blk_integrity_is_initialized() to allow checking if a
profile was initialized.

Update DM integrity support to:
- check all devices with _initialized_ integrity profiles match
  during table load; uninitialized profiles (e.g. for underlying DM
  device(s) of a stacked DM device) are ignored.
- disallow a table load that would result in an integrity profile that
  conflicts with a DM device's existing (in-use) integrity profile
- avoid clearing an existing integrity profile
- validate all integrity profiles match during resume; but if they
  don't all we can do is report the mismatch (during resume we're past
  the point of no return)

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-05 23:52:43 +02:00
Andreas Schwab 6f03793770 blk-throttle: don't call xchg on bool
xchg does not work portably with smaller than 32bit types.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-05 23:51:37 +02:00
Jens Axboe 53d63e6b0d block: make the flush insertion use the tail of the dispatch list
It's not a preempt type request, in fact we have to insert it
behind requests that do specify INSERT_FRONT.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-05 23:51:37 +02:00
Jens Axboe b710a48055 block: get rid of elv_insert() interface
Merge it with __elv_add_request(), it's pretty pointless to
have a function with only two callers. The main interface
is elv_add_request()/__elv_add_request().

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-05 23:51:37 +02:00
Jens Axboe 8182924bc5 block: dump request state on seeing a corrupted request completion
Currently we just dump a non-informative 'request botched' message.
Lets actually try and print something sane to help debug issues
around this.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-05 23:51:37 +02:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Jens Axboe ad3d9d7ede block: fix issue with calling blk_stop_queue() from the request_fn handler
When the queue work handler was converted to delayed work, the
stopping was inadvertently made sync as well. Change this back
to being async stop, using __cancel_delayed_work() instead of
cancel_delayed_work().

Reported-by: Jeremy Fitzhardinge <jeremy@goop.org>
Reported-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-25 17:04:08 +01:00
Jens Axboe 401a18e92c block: fix bug with inserting flush requests as sort/merge
With the introduction of the on-stack plugging, we would assume
that any request being inserted was a normal file system request.
As flush/fua requires a special insert mode, this caused problems.

Fix this up by checking for this in flush_plug_list() and use
the appropriate insert mechanism.

Big thanks goes to Markus Tripplesdorf for tirelessly testing
patches, and to Sergey Senozhatsky for helping find the real
issue.

Reported-by: Markus Tripplesdorf <markus@trippelsdorf.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-25 17:04:08 +01:00
Linus Torvalds 6c51038900 Merge branch 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block: (65 commits)
  Documentation/iostats.txt: bit-size reference etc.
  cfq-iosched: removing unnecessary think time checking
  cfq-iosched: Don't clear queue stats when preempt.
  blk-throttle: Reset group slice when limits are changed
  blk-cgroup: Only give unaccounted_time under debug
  cfq-iosched: Don't set active queue in preempt
  block: fix non-atomic access to genhd inflight structures
  block: attempt to merge with existing requests on plug flush
  block: NULL dereference on error path in __blkdev_get()
  cfq-iosched: Don't update group weights when on service tree
  fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away
  block: Require subsystems to explicitly allocate bio_set integrity mempool
  jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
  jbd: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
  fs: make fsync_buffers_list() plug
  mm: make generic_writepages() use plugging
  blk-cgroup: Add unaccounted time to timeslice_used.
  block: fixup plugging stubs for !CONFIG_BLOCK
  block: remove obsolete comments for blkdev_issue_zeroout.
  blktrace: Use rq->cmd_flags directly in blk_add_trace_rq.
  ...

Fix up conflicts in fs/{aio.c,super.c}
2011-03-24 10:16:26 -07:00
Li, Shaohua c4ade94fc0 cfq-iosched: removing unnecessary think time checking
Removing think time checking. A high thinktime queue might means the queue
dispatches several requests and then do away. Limitting such queue seems
meaningless. And also this can simplify code. This is suggested by Vivek.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-23 08:30:34 +01:00
Justin TerAvest 62a37f6bad cfq-iosched: Don't clear queue stats when preempt.
For v2, I added back lines to cfq_preempt_queue() that were removed
during updates for accounting unaccounted_time. Thanks for pointing out
that I'd missed these, Vivek.

Previous commit "cfq-iosched: Don't set active queue in preempt" wrongly
cleared stats for preempting queues when it shouldn't have, because when
we choose a queue to preempt, it still isn't necessarily scheduled next.

Thanks to Vivek Goyal for figuring this out and understanding how the
preemption code works.

Signed-off-by: Justin TerAvest <teravest@google.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-23 08:25:44 +01:00
Vivek Goyal 04521db04e blk-throttle: Reset group slice when limits are changed
Lina reported that if throttle limits are initially very high and then
dropped, then no new bio might be dispatched for a long time. And the
reason being that after dropping the limits we don't reset the existing
slice and do the rate calculation with new low rate and account the bios
dispatched at high rate. To fix it, reset the slice upon rate change.

https://lkml.org/lkml/2011/3/10/298

Another problem with very high limit is that we never queued the
bio on throtl service tree. That means we kept on extending the
group slice but never trimmed it. Fix that also by regulary
trimming the slice even if bio is not being queued up.

Reported-by: Lina Lu <lulina_nuaa@foxmail.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-22 21:55:00 +01:00
Justin TerAvest 9026e521c0 blk-cgroup: Only give unaccounted_time under debug
This change moves unaccounted_time to only be reported when
CONFIG_DEBUG_BLK_CGROUP is true.

Signed-off-by: Justin TerAvest <teravest@google.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-22 21:26:54 +01:00
Justin TerAvest eda5e0c91f cfq-iosched: Don't set active queue in preempt
Commit "Add unaccounted time to timeslice_used" changed the behavior of
cfq_preempt_queue to set cfqq active. Vivek pointed out that other
preemption rules might get involved, so we shouldn't manually set which
queue is active.

This cleans up the code to just clear the queue stats at preemption
time.

Signed-off-by: Justin TerAvest <teravest@google.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-22 21:26:49 +01:00
Jens Axboe 5e84ea3a9c block: attempt to merge with existing requests on plug flush
One of the disadvantages of on-stack plugging is that we potentially
lose out on merging since all pending IO isn't always visible to
everybody. When we flush the on-stack plugs, right now we don't do
any checks to see if potential merge candidates could be utilized.

Correct this by adding a new insert variant, ELEVATOR_INSERT_SORT_MERGE.
It works just ELEVATOR_INSERT_SORT, but first checks whether we can
merge with an existing request before doing the insertion (if we fail
merging).

This fixes a regression with multiple processes issuing IO that
can be merged.

Thanks to Shaohua Li <shaohua.li@intel.com> for testing and fixing
an accounting bug.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-21 10:14:27 +01:00
Linus Torvalds c55d267de2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (170 commits)
  [SCSI] scsi_dh_rdac: Add MD36xxf into device list
  [SCSI] scsi_debug: add consecutive medium errors
  [SCSI] libsas: fix ata list corruption issue
  [SCSI] hpsa: export resettable host attribute
  [SCSI] hpsa: move device attributes to avoid forward declarations
  [SCSI] scsi_debug: Logical Block Provisioning (SBC3r26)
  [SCSI] sd: Logical Block Provisioning update
  [SCSI] Include protection operation in SCSI command trace
  [SCSI] hpsa: fix incorrect PCI IDs and add two new ones (2nd try)
  [SCSI] target: Fix volume size misreporting for volumes > 2TB
  [SCSI] bnx2fc: Broadcom FCoE offload driver
  [SCSI] fcoe: fix broken fcoe interface reset
  [SCSI] fcoe: precedence bug in fcoe_filter_frames()
  [SCSI] libfcoe: Remove stale fcoe-netdev entries
  [SCSI] libfcoe: Move FCOE_MTU definition from fcoe.h to libfcoe.h
  [SCSI] libfc: introduce __fc_fill_fc_hdr that accepts fc_hdr as an argument
  [SCSI] fcoe, libfc: initialize EM anchors list and then update npiv EMs
  [SCSI] Revert "[SCSI] libfc: fix exchange being deleted when the abort itself is timed out"
  [SCSI] libfc: Fixing a memory leak when destroying an interface
  [SCSI] megaraid_sas: Version and Changelog update
  ...

Fix up trivial conflicts due to whitespace differences in
drivers/scsi/libsas/{sas_ata.c,sas_scsi_host.c}
2011-03-17 17:54:40 -07:00
Justin TerAvest 8184f93ece cfq-iosched: Don't update group weights when on service tree
Version 3 is updated to apply to for-2.6.39/core.

For version 2, I took Vivek's advice and made sure we update the group
weight from cfq_group_service_tree_add().

If a weight was updated while a group is on the service tree, the
calculation for the total weight of the service tree can be adjusted
improperly, which either leads to bad service tree weights, or
potentially crashes (if total_weight becomes 0).

This patch defers updates to the weight until a group is off the service
tree.

Signed-off-by: Justin TerAvest <teravest@google.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-17 16:12:36 +01:00
Justin TerAvest 167400d340 blk-cgroup: Add unaccounted time to timeslice_used.
There are two kind of times that tasks are not charged for: the first
seek and the extra time slice used over the allocated timeslice. Both
of these exported as a new unaccounted_time stat.

I think it would be good to have this reported in 'time' as well, but
that is probably a separate discussion.

Signed-off-by: Justin TerAvest <teravest@google.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-12 16:54:00 +01:00
Tao Ma eba2ed9c96 block: remove obsolete comments for blkdev_issue_zeroout.
barrier is already removed, so remove the obsolete comments
in blkdev_issue_zeroout.

Cc: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-11 20:13:54 +01:00
Lukas Czerner 0aeea18964 block: fix mis-synchronisation in blkdev_issue_zeroout()
BZ29402
https://bugzilla.kernel.org/show_bug.cgi?id=29402

We can hit serious mis-synchronization in bio completion path of
blkdev_issue_zeroout() leading to a panic.

The problem is that when we are going to wait_for_completion() in
blkdev_issue_zeroout() we check if the bb.done equals issued (number of
submitted bios). If it does, we can skip the wait_for_completition()
and just out of the function since there is nothing to wait for.
However, there is a ordering problem because bio_batch_end_io() is
calling atomic_inc(&bb->done) before complete(), hence it might seem to
blkdev_issue_zeroout() that all bios has been completed and exit. At
this point when bio_batch_end_io() is going to call complete(bb->wait),
bb and wait does not longer exist since it was allocated on stack in
blkdev_issue_zeroout() ==> panic!

(thread 1)                      (thread 2)
bio_batch_end_io()              blkdev_issue_zeroout()
  if(bb) {                      ...
    if (bb->end_io)             ...
      bb->end_io(bio, err);     ...
    atomic_inc(&bb->done);      ...
    ...                         while (issued != atomic_read(&bb.done))
    ...                         (let issued == bb.done)
    ...                         (do the rest of the function)
    ...                         return ret;
    complete(bb->wait);
    ^^^^^^^^
    panic

We can fix this easily by simplifying bio_batch and completion counting.

Also remove bio_end_io_t *end_io since it is not used.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reported-by: Eric Whitney <eric.whitney@hp.com>
Tested-by: Eric Whitney <eric.whitney@hp.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
CC: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-11 15:36:08 +01:00
Jens Axboe 4c63f5646e Merge branch 'for-2.6.39/stack-plug' into for-2.6.39/core
Conflicts:
	block/blk-core.c
	block/blk-flush.c
	drivers/md/raid1.c
	drivers/md/raid10.c
	drivers/md/raid5.c
	fs/nilfs2/btnode.c
	fs/nilfs2/mdt.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:58:35 +01:00
Vivek Goyal 69d60eb96a blk-throttle: Use blk_plug in throttle dispatch
Use plug in throttle dispatch also as we are dispatching a bunch of
bios in throttle context and some of them might merge.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:52:27 +01:00
Jens Axboe 721a9602e6 block: kill off REQ_UNPLUG
With the plugging now being explicitly controlled by the
submitter, callers need not pass down unplugging hints
to the block layer. If they want to unplug, it's because they
manually plugged on their own - in which case, they should just
unplug at will.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:52:27 +01:00
Jens Axboe 7eaceaccab block: remove per-queue plugging
Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:52:07 +01:00
Jens Axboe 73c1010119 block: initial patch for on-stack per-task plugging
This patch adds support for creating a queuing context outside
of the queue itself. This enables us to batch up pieces of IO
before grabbing the block device queue lock and submitting them to
the IO scheduler.

The context is created on the stack of the process and assigned in
the task structure, so that we can auto-unplug it if we hit a schedule
event.

The current queue plugging happens implicitly if IO is submitted to
an empty device, yet callers have to remember to unplug that IO when
they are going to wait for it. This is an ugly API and has caused bugs
in the past. Additionally, it requires hacks in the vm (->sync_page()
callback) to handle that logic. By switching to an explicit plugging
scheme we make the API a lot nicer and can get rid of the ->sync_page()
hack in the vm.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:45:54 +01:00
Jens Axboe 3cca6dc1c8 block: add API for delaying work/request_fn a little bit
Currently we use plugging for that, but as plugging is going away,
we need an alternative mechanism.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:45:54 +01:00
Tejun Heo facc31ddc3 block: Don't implicitly trigger event check on disk_unblock_events()
Currently, disk_unblock_events() implicitly kick event check if the
block count reaches zero.  This behavior is not described in the
comment and hinders with future changes.  Make the unblocker
explicitly check events by calling disk_check_events() as necessary.

This patch doesn't cause any behavior difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
2011-03-09 19:54:27 +01:00
Justin TerAvest df457f845e blk-cgroup: Lower minimum weight from 100 to 10.
We've found that we still get good, useful isolation at weights this
low. I'd like to adjust the minimum so that any other changes can take
these values into account.

Signed-off-by: Justin TerAvest <teravest@google.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-08 19:45:00 +01:00
Vivek Goyal de701c74a3 blk-throttle: Some cleanups and race fixes in limit update code
When throttle group limits are updated through cgroups, a thread is
woken up to process these updates. While reviewing that code, oleg noted
couple of race conditions existed in the code and he also suggested that
code can be simplified.

This patch fixes the races simplifies the code based on Oleg's suggestions:

	- Use xchg().
	- Introduced a common function throtl_update_blkio_group_common()
          which is shared now by all iops/bps update functions.

Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>

Fixed a merge issue, throtl_schedule_delayed_work() takes throtl_data
as the argument now, not the queue.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-07 21:09:32 +01:00
Vivek Goyal 231d704b4a blk-throttle: process limit change only through one function
With the help of cgroup interface one can go and upate the bps/iops
limits of existing group. Once the limits are udpated, a thread is
woken up to see if some blocked group needs recalculation based on new
limits and needs to be requeued.

There was also a piece of code where I was checking for group limit
update when a fresh bio comes in. This patch gets rid of that piece of
code and keeps processing the limit change at one place
throtl_process_limit_change().  It just keeps the code simple and easy
to understand.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-07 21:05:14 +01:00
Jens Axboe b873c5d692 Merge branch 'block-for-2.6.39-core' of ssh://master.kernel.org/pub/scm/linux/kernel/git/tj/misc into for-2.6.39/core 2011-03-07 09:40:21 +01:00
Gui Jianfeng a60327107b cfq-iosched: Fix update_vdisktime logic
The update_vdisktime logic is broken since commit
b54ce60eb7, st->min_vdisktime never makes
a progress. Fix it.

Thanks Vivek for pointing it out.

Signed-off-by: Gui Jianfeng <guijianfen@cn.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-07 09:28:09 +01:00
Shaohua Li ef8a41df8c cfq-iosched: give busy sync queue no dispatch limit
If there are a sync and an async queue and the sync queue's think time
is small, we can ignore the sync queue's dispatch quantum. Because the
sync queue will always preempt the async queue, we don't need to care
about async's latency.  This can fix a performance regression of
aiostress test, which is introduced by commit f8ae6e3eb8. The issue
should exist even without the commit, but the commit amplifies the
impact.

The initial post does the same optimization for RT queue too, but since
I have no real workload for it, Vivek suggests to drop it.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Reviewed-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-07 09:26:29 +01:00
Jens Axboe 93803e0140 cfq-iosched: fix race in cfq_set_request()
We need to hold the queue lock over the reference increment,
it's not atomic anymore.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-07 08:59:06 +01:00
Tejun Heo e83a46bbb1 Merge branch 'for-linus' of ../linux-2.6-block into block-for-2.6.39/core
This merge creates two set of conflicts.  One is simple context
conflicts caused by removal of throtl_scheduled_delayed_work() in
for-linus and removal of throtl_shutdown_timer_wq() in
for-2.6.39/core.

The other is caused by commit 255bb490c8 (block: blk-flush shouldn't
call directly into q->request_fn() __blk_run_queue()) in for-linus
crashing with FLUSH reimplementation in for-2.6.39/core.  The conflict
isn't trivial but the resolution is straight-forward.

* __blk_run_queue() calls in flush_end_io() and flush_data_end_io()
  should be called with @force_kblockd set to %true.

* elv_insert() in blk_kick_flush() should use
  %ELEVATOR_INSERT_REQUEUE.

Both changes are to avoid invoking ->request_fn() directly from
request completion path and closely match the changes in the commit
255bb490c8.

Signed-off-by: Tejun Heo <tj@kernel.org>
2011-03-04 19:09:02 +01:00
Vivek Goyal da52777000 block: Move blk_throtl_exit() call to blk_cleanup_queue()
Move blk_throtl_exit() in blk_cleanup_queue() as blk_throtl_exit() is
written in such a way that it needs queue lock. In blk_release_queue()
there is no gurantee that ->queue_lock is still around.

Initially blk_throtl_exit() was in blk_cleanup_queue() but Ingo reported
one problem.

  https://lkml.org/lkml/2010/10/23/86

  And a quick fix moved blk_throtl_exit() to blk_release_queue().

        commit 7ad58c0286
        Author: Jens Axboe <jaxboe@fusionio.com>
        Date:   Sat Oct 23 20:40:26 2010 +0200

        block: fix use-after-free bug in blk throttle code

This patch reverts above change and does not try to shutdown the
throtl work in blk_sync_queue(). By avoiding call to
throtl_shutdown_timer_wq() from blk_sync_queue(), we should also avoid
the problem reported by Ingo.

blk_sync_queue() seems to be used only by md driver and it seems to be
using it to make sure q->unplug_fn is not called as md registers its
own unplug functions and it is about to free up the data structures
used by unplug_fn(). Block throttle does not call back into unplug_fn()
or into md. So there is no need to cancel blk throttle work.

In fact I think cancelling block throttle work is bad because it might
happen that some bios are throttled and scheduled to be dispatched later
with the help of pending work and if work is cancelled, these bios might
never be dispatched.

Block layer also uses blk_sync_queue() during blk_cleanup_queue() and
blk_release_queue() time. That should be safe as we are also calling
blk_throtl_exit() which should make sure all the throttling related
data structures are cleaned up.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-02 19:06:49 -05:00
Vivek Goyal c94a96ac93 block: Initialize ->queue_lock to internal lock at queue allocation time
There does not seem to be a clear convention whether q->queue_lock is
initialized or not when blk_cleanup_queue() is called. In the past it
was not necessary but now blk_throtl_exit() takes up queue lock by
default and needs queue lock to be available.

In fact elevator_exit() code also has similar requirement just that it
is less stringent in the sense that elevator_exit() is called only if
elevator is initialized.

Two problems have been noticed because of ambiguity about spin lock
status.

      - If a driver calls blk_alloc_queue() and then soon calls
        blk_cleanup_queue() almost immediately, (because some other
	driver structure allocation failed or some other error happened)
	then blk_throtl_exit() will run into issues as queue lock is not
	initialized. Loop driver ran into this issue recently and I
	noticed error paths in md driver too. Similar error paths should
	exist in other drivers too.

      - If some driver provided external spin lock and zapped the lock
        before blk_cleanup_queue(), then it can lead to issues.

So this patch initializes the default queue lock at queue allocation time.

block throttling code is one of the users of queue lock and it is
initialized at the queue allocation time, so it makes sense to
initialize ->queue_lock also to internal lock. A driver can overide that
lock later. This will take care of the issue where a driver does not have
to worry about initializing the queue lock to default before calling
blk_cleanup_queue()

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-02 19:06:49 -05:00
Liu Yuan 53f22956ef block/genhd: Change some numerals into macros
Rename the numerals in the diskstats_show() into the macros.

Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-02 11:00:15 -05:00
Tejun Heo 255bb490c8 block: blk-flush shouldn't call directly into q->request_fn() __blk_run_queue()
blk-flush decomposes a flush into sequence of multiple requests.  On
completion of a request, the next one is queued; however, block layer
must not implicitly call into q->request_fn() directly from completion
path.  This makes the queue behave unexpectedly when seen from the
drivers and violates the assumption that q->request_fn() is called
with process context + queue_lock.

This patch makes blk-flush the following two changes to make sure
q->request_fn() is not called directly from request completion path.

- blk_flush_complete_seq_end_io() now asks __blk_run_queue() to always
  use kblockd instead of calling directly into q->request_fn().

- queue_next_fseq() uses ELEVATOR_INSERT_REQUEUE instead of
  ELEVATOR_INSERT_FRONT so that elv_insert() doesn't try to unplug the
  request queue directly.

Reported by Jan in the following threads.

 http://thread.gmane.org/gmane.linux.ide/48778
 http://thread.gmane.org/gmane.linux.ide/48786

stable: applicable to v2.6.37.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jan Beulich <JBeulich@novell.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-02 08:48:06 -05:00
Tejun Heo 1654e7411a block: add @force_kblockd to __blk_run_queue()
__blk_run_queue() automatically either calls q->request_fn() directly
or schedules kblockd depending on whether the function is recursed.
blk-flush implementation needs to be able to explicitly choose
kblockd.  Add @force_kblockd.

All the current users are converted to specify %false for the
parameter and this patch doesn't introduce any behavior change.

stable: This is prerequisite for fixing ide oops caused by the new
        blk-flush implementation.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-02 08:48:05 -05:00
Justin TerAvest 0bbfeb8320 cfq-iosched: Always provide group isolation.
Effectively, make group_isolation=1 the default and remove the tunable.
The setting group_isolation=0 was because by default we idle on
sync-noidle tree and on fast devices, this can be very harmful for
throughput.

However, this problem can also be addressed by tuning slice_idle and
possibly group_idle on faster storage devices.

This change simplifies the CFQ code by removing the feature entirely.

Signed-off-by: Justin TerAvest <teravest@google.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-01 15:05:08 -05:00
Jens Axboe 6fae9c2513 Merge commit 'v2.6.38-rc6' into for-2.6.39/core
Conflicts:
	block/cfq-iosched.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-01 15:04:39 -05:00
Ben Hutchings 291d24f6d9 block: fix kernel-doc format for blkdev_issue_zeroout
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-01 13:45:24 -05:00
Vivek Goyal 450adcbe51 blk-throttle: Do not use kblockd workqueue for throtl work
o Dominik Klein reported a system hang issue while doing some blkio
  throttling testing.

  https://lkml.org/lkml/2011/2/24/173

o Some tracing revealed that CFQ was not dispatching any more jobs as
  queue unplug was not happening. And queue unplug was not happening
  because unplug work was not being called as there was one throttling
  work on same cpu which as not finished yet. And throttling work had not
  finished as it was tyring to dispatch a bio to CFQ but all the request
  descriptors were consume to it was put to sleep.

o So basically it is a cyclic dependecny between CFQ unplug work and
  throtl dispatch work. Tejun suggested that use separate workqueue for
  such cases.

o This patch uses a separate workqueue for throttle related work and
  does not rely on kblockd workqueue anymore.

Cc: stable@kernel.org
Reported-by: Dominik Klein <dk@in-telegence.net>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-01 13:41:53 -05:00
Linus Torvalds 638691a7a4 Merge branch 'for-linus' of git://neil.brown.name/md
* 'for-linus' of git://neil.brown.name/md:
  md: Fix - again - partition detection when array becomes active
  Fix over-zealous flush_disk when changing device size.
  md: avoid spinlock problem in blk_throtl_exit
  md: correctly handle probe of an 'mdp' device.
  md: don't set_capacity before array is active.
  md: Fix raid1->raid0 takeover
2011-02-25 11:13:26 -08:00
Miklos Szeredi 3c522cedb5 block: fix refcounting in BLKBSZSET
Adam Kovari and others reported that disconnecting an USB drive with
an ntfs-3g filesystem would cause "kernel BUG at fs/inode.c:1421!" to
be triggered.

The BUG could be traced back to ioctl(BLKBSZSET), which would
erroneously decrement the refcount on the bdev.  This is because
blkdev_get() expects the refcount to be already incremented and either
returns success or decrements the refcount and returns an error.

The bug was introduced by e525fd89 (block: make blkdev_get/put()
handle exclusive access), which didn't take into account this behavior
of blkdev_get().

This fixes
  https://bugzilla.kernel.org/show_bug.cgi?id=29202
(and likely 29792 too)

Reported-by: Adam Kovari <kovariadam@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-24 08:54:21 -08:00
NeilBrown 93b270f76e Fix over-zealous flush_disk when changing device size.
There are two cases when we call flush_disk.
In one, the device has disappeared (check_disk_change) so any
data will hold becomes irrelevant.
In the oter, the device has changed size (check_disk_size_change)
so data we hold may be irrelevant.

In both cases it makes sense to discard any 'clean' buffers,
so they will be read back from the device if needed.

In the former case it makes sense to discard 'dirty' buffers
as there will never be anywhere safe to write the data.  In the
second case it *does*not* make sense to discard dirty buffers
as that will lead to file system corruption when you simply enlarge
the containing devices.

flush_disk calls __invalidate_devices.
__invalidate_device calls both invalidate_inodes and invalidate_bdev.

invalidate_inodes *does* discard I_DIRTY inodes and this does lead
to fs corruption.

invalidate_bev *does*not* discard dirty pages, but I don't really care
about that at present.

So this patch adds a flag to __invalidate_device (calling it
__invalidate_device2) to indicate whether dirty buffers should be
killed, and this is passed to invalidate_inodes which can choose to
skip dirty inodes.

flusk_disk then passes true from check_disk_change and false from
check_disk_size_change.

dm avoids tripping over this problem by calling i_size_write directly
rathher than using check_disk_size_change.

md does use check_disk_size_change and so is affected.

This regression was introduced by commit 608aeef17a which causes
check_disk_size_change to call flush_disk, so it is suitable for any
kernel since 2.6.27.

Cc: stable@kernel.org
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Andrew Patterson <andrew.patterson@hp.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NeilBrown <neilb@suse.de>
2011-02-24 17:25:47 +11:00
Hannes Reinecke 79775567e0 [SCSI] block: improve detail in I/O error messages
Classify severity of I/O errors for target, nexus, and
transport errors.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Acked-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-12 10:33:37 -06:00
Mike Snitzer c186794dbb block: share request flush fields with elevator_private
Flush requests are never put on the IO scheduler.  Convert request
structure's elevator_private* into an array and have the flush fields
share a union with it.

Reclaim the space lost in 'struct request' by moving 'completion_data'
back in the union with 'rb_node'.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-02-11 11:08:00 +01:00
Mike Snitzer 9d5a4e946c block: skip elevator data initialization for flush requests
Skip elevator initialization for flush requests by passing priv=0 to
blk_alloc_request() in get_request().  As such elv_set_request() is
never called for flush requests.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-02-11 11:05:46 +01:00
Linus Torvalds aceb91cd35 Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  cdrom: support devices that have check_events but not media_changed
  cfq-iosched: Don't wait if queue already has requests.
  blkio-throttle: Avoid calling blkiocg_lookup_group() for root group
  cfq: rename a function to give it more appropriate name
  cciss: make cciss_revalidate not loop through CISS_MAX_LUNS volumes unnecessarily.
  drivers/block/aoe/Makefile: replace the use of <module>-objs with <module>-y
  loop: queue_lock NULL pointer derefence in blk_throtl_exit
  drivers/block/Makefile: replace the use of <module>-objs with <module>-y
  blktrace: Don't output messages if NOTIFY isn't set.
2011-02-09 11:45:21 -08:00
Justin TerAvest 02a8f01b5a cfq-iosched: Don't wait if queue already has requests.
Commit 7667aa0630 added logic to wait for
the last queue of the group to become busy (have at least one request),
so that the group does not lose out for not being continuously
backlogged. The commit did not check for the condition that the last
queue already has some requests. As a result, if the queue already has
requests, wait_busy is set. Later on, cfq_select_queue() checks the
flag, and decides that since the queue has a request now and wait_busy
is set, the queue is expired.  This results in early expiration of the
queue.

This patch fixes the problem by adding a check to see if queue already
has requests. If it does, wait_busy is not set. As a result, time slices
do not expire early.

The queues with more than one request are usually buffered writers.
Testing shows improvement in isolation between buffered writers.

Cc: stable@kernel.org
Signed-off-by: Justin TerAvest <teravest@google.com>
Reviewed-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-02-09 14:22:36 +01:00
Tejun Heo ae1b153962 block: reimplement FLUSH/FUA to support merge
The current FLUSH/FUA support has evolved from the implementation
which had to perform queue draining.  As such, sequencing is done
queue-wide one flush request after another.  However, with the
draining requirement gone, there's no reason to keep the queue-wide
sequential approach.

This patch reimplements FLUSH/FUA support such that each FLUSH/FUA
request is sequenced individually.  The actual FLUSH execution is
double buffered and whenever a request wants to execute one for either
PRE or POSTFLUSH, it queues on the pending queue.  Once certain
conditions are met, a flush request is issued and on its completion
all pending requests proceed to the next sequence.

This allows arbitrary merging of different type of flushes.  How they
are merged can be primarily controlled and tuned by adjusting the
above said 'conditions' used to determine when to issue the next
flush.

This is inspired by Darrick's patches to merge multiple zero-data
flushes which helps workloads with highly concurrent fsync requests.

* As flush requests are never put on the IO scheduler, request fields
  used for flush share space with rq->rb_node.  rq->completion_data is
  moved out of the union.  This increases the request size by one
  pointer.

  As rq->elevator_private* are used only by the iosched too, it is
  possible to reduce the request size further.  However, to do that,
  we need to modify request allocation path such that iosched data is
  not allocated for flush requests.

* FLUSH/FUA processing happens on insertion now instead of dispatch.

- Comments updated as per Vivek and Mike.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-25 12:43:54 +01:00
Tejun Heo 143a87f4c9 block: improve flush bio completion
bio's for flush are completed twice - once during the data phase and
one more time after the whole sequence is complete.  The first
completion shouldn't notify completion to the issuer.

This was achieved by skipping all bio completion steps in
req_bio_endio() for the first completion; however, this has two
drawbacks.

* Error is not recorded in bio and must be tracked somewhere else.

* Partial completion is not supported.

Both don't cause problems for the current users; however, they make
further improvements difficult.  Change req_bio_endio() such that it
only skips the actual notification part for the first completion.  bio
completion is implemented with partial completions on mind anyway so
this is as simple as moving the REQ_FLUSH_SEQ conditional such that
only calling of bio_endio() is skipped.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-25 12:43:52 +01:00
Tejun Heo 414b4ff5ee block: add REQ_FLUSH_SEQ
rq == &q->flush_rq was used to determine whether a rq is part of a
flush sequence, which worked because all requests in a flush sequence
were sequenced using the single dedicated request.  This is about to
change, so introduce REQ_FLUSH_SEQ flag to distinguish flush sequence
requests.

This patch doesn't cause any behavior change.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-25 12:43:49 +01:00
David Rientjes 6a108a14fa kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.

This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel.  A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).

Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.

Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20 17:02:05 -08:00
Vivek Goyal be2c6b1990 blkio-throttle: Avoid calling blkiocg_lookup_group() for root group
o Jeff Moyer was doing some testing on a RAM backed disk and
  blkiocg_lookup_group() showed up high overhead after memcpy(). Similarly
  somebody else reported that blkiocg_lookup_group() is eating 6% extra
  cpu. Though looking at the code I can't think why the overhead of
  this function is so high. One thing is that it is called with very high
  frequency (once for every IO).

o For lot of folks blkio controller will be compiled in but they might
  not have actually created cgroups. Hence optimize the case of root
  cgroup where we can avoid calling blkiocg_lookup_group() if IO is happening
  in root group (common case).

Reported-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-19 08:25:02 -07:00
Vivek Goyal ba5bd520f6 cfq: rename a function to give it more appropriate name
o Rename a function to give it more approprate name. We are calculating
  cfq queue slice and function name gives the impression as if cfq group
  slice length is being calculated.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-19 08:25:02 -07:00
Shaohua Li c553f8e335 block cfq: compensate preempted queue even if it has no slice assigned
If a queue is preempted before it gets slice assigned, the queue doesn't get
compensation, which looks unfair. For such queue, we compensate it for a whole
slice.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-14 08:41:03 +01:00
Shaohua Li f8ae6e3eb8 block cfq: make queue preempt work for queues from different workload
I got this:
             fio-874   [007]  2157.724514:   8,32   m   N cfq874 preempt
             fio-874   [007]  2157.724519:   8,32   m   N cfq830 slice expired t=1
             fio-874   [007]  2157.724520:   8,32   m   N cfq830 sl_used=1 disp=0 charge=1 iops=0 sect=0
             fio-874   [007]  2157.724521:   8,32   m   N cfq830 set_active wl_prio:0 wl_type:0
             fio-874   [007]  2157.724522:   8,32   m   N cfq830 Not idling. st->count:1

cfq830 is an async queue, and preempted by a sync queue cfq874. But since we
have cfqg->saved_workload_slice mechanism, the preempt is a nop.
Looks currently our preempt is totally broken if the two queues are not from
the same workload type.
Below patch fixes it. This will might make async queue starvation, but it's
what our old code does before cgroup is added.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-14 08:41:02 +01:00
Linus Torvalds 275220f0fc Merge branch 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block: (43 commits)
  block: ensure that completion error gets properly traced
  blktrace: add missing probe argument to block_bio_complete
  block cfq: don't use atomic_t for cfq_group
  block cfq: don't use atomic_t for cfq_queue
  block: trace event block fix unassigned field
  block: add internal hd part table references
  block: fix accounting bug on cross partition merges
  kref: add kref_test_and_get
  bio-integrity: mark kintegrityd_wq highpri and CPU intensive
  block: make kblockd_workqueue smarter
  Revert "sd: implement sd_check_events()"
  block: Clean up exit_io_context() source code.
  Fix compile warnings due to missing removal of a 'ret' variable
  fs/block: type signature of major_to_index(int) to major_to_index(unsigned)
  block: convert !IS_ERR(p) && p to !IS_ERR_NOR_NULL(p)
  cfq-iosched: don't check cfqg in choose_service_tree()
  fs/splice: Pull buf->ops->confirm() from splice_from_pipe actors
  cdrom: export cdrom_check_events()
  sd: implement sd_check_events()
  sr: implement sr_check_events()
  ...
2011-01-13 10:45:01 -08:00
Jens Axboe 81c5e2ae33 Merge branch 'for-2.6.38/event-handling' into for-2.6.38/core 2011-01-13 14:47:54 +01:00
Shaohua Li 329a67815b block cfq: don't use atomic_t for cfq_group
cfq_group->ref is used with queue_lock hold, the only exception is
cfq_set_request, which looks like a bug to me, so ref doesn't need
to be an atomic and atomic operation is slower.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-07 08:48:28 +01:00
Shaohua Li 30d7b9448f block cfq: don't use atomic_t for cfq_queue
cfq_queue->ref is used with queue_lock hold, so ref doesn't need to be an atomic
and atomic operation is slower.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-07 08:46:59 +01:00
Jens Axboe 6c23a9681c block: add internal hd part table references
We can't use krefs since it's apparently restricted to very basic
reference counting.

This reverts commit e4a683c8.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-07 08:43:37 +01:00
Jerome Marchand 09e099d4ba block: fix accounting bug on cross partition merges
/proc/diskstats would display a strange output as follows.

$ cat /proc/diskstats |grep sda
   8       0 sda 90524 7579 102154 20464 0 0 0 0 0 14096 20089
   8       1 sda1 19085 1352 21841 4209 0 0 0 0 4294967064 15689 4293424691
                                                ~~~~~~~~~~
   8       2 sda2 71252 3624 74891 15950 0 0 0 0 232 23995 1562390
   8       3 sda3 54 487 2188 92 0 0 0 0 0 88 92
   8       4 sda4 4 0 8 0 0 0 0 0 0 0 0
   8       5 sda5 81 2027 2130 138 0 0 0 0 0 87 137

Its reason is the wrong way of accounting hd_struct->in_flight. When a bio is
merged into a request belongs to different partition by ELEVATOR_FRONT_MERGE.

The detailed root cause is as follows.

Assuming that there are two partition, sda1 and sda2.

1. A request for sda2 is in request_queue. Hence sda1's hd_struct->in_flight
   is 0 and sda2's one is 1.

        | hd_struct->in_flight
   ---------------------------
   sda1 |          0
   sda2 |          1
   ---------------------------

2. A bio belongs to sda1 is issued and is merged into the request mentioned on
   step1 by ELEVATOR_BACK_MERGE. The first sector of the request is changed
   from sda2 region to sda1 region. However the two partition's
   hd_struct->in_flight are not changed.

        | hd_struct->in_flight
   ---------------------------
   sda1 |          0
   sda2 |          1
   ---------------------------

3. The request is finished and blk_account_io_done() is called. In this case,
   sda2's hd_struct->in_flight, not a sda1's one, is decremented.

        | hd_struct->in_flight
   ---------------------------
   sda1 |         -1
   sda2 |          1
   ---------------------------

The patch fixes the problem by caching the partition lookup
inside the request structure, hence making sure that the increment
and decrement will always happen on the same partition struct. This
also speeds up IO with accounting enabled, since it cuts down on
the number of lookups we have to do.

Also add a refcount to struct hd_struct to keep the partition in
memory as long as users exist. We use kref_test_and_get() to ensure
we don't add a reference to a partition which is going away.

Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-05 16:57:38 +01:00
Tejun Heo 89b90be2d8 block: make kblockd_workqueue smarter
kblockd is used for unplugging and may affect IO latency and
throughput and the max number of concurrent work items are bound by
the number of block devices.  Make it HIGHPRI workqueue w/ default max
concurrency.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-03 15:01:47 +01:00
Jiri Kosina 4b7bd36470 Merge branch 'master' into for-next
Conflicts:
	MAINTAINERS
	arch/arm/mach-omap2/pm24xx.c
	drivers/scsi/bfa/bfa_fcpim.c

Needed to update to apply fixes for which the old branch was too
outdated.
2010-12-22 18:57:02 +01:00
Bart Van Assche 27667c996f block: Clean up exit_io_context() source code.
This patch fixes a spelling error in a source code comment and removes
superfluous braces in the function exit_io_context().

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-12-21 15:07:45 +01:00
Linus Torvalds 7f8635cc9e Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  cciss: fix cciss_revalidate panic
  block: max hardware sectors limit wrapper
  block: Deprecate QUEUE_FLAG_CLUSTER and use queue_limits instead
  blk-throttle: Correct the placement of smp_rmb()
  blk-throttle: Trim/adjust slice_end once a bio has been dispatched
  block: check for proper length of iov entries earlier in blk_rq_map_user_iov()
  drbd: fix for spin_lock_irqsave in endio callback
  drbd: don't recvmsg with zero length
2010-12-20 09:19:46 -08:00
Yang Zhang e61eb2e93f fs/block: type signature of major_to_index(int) to major_to_index(unsigned)
The major/minor device numbers are always defined and used as `unsigned'.

Signed-off-by: Yang Zhang <kthreadd@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-12-17 09:00:18 +01:00
Yang Zhang b9f985b6e0 block: convert !IS_ERR(p) && p to !IS_ERR_NOR_NULL(p)
Signed-off-by: Yang Zhang <kthreadd@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-12-17 08:58:36 +01:00
Gui Jianfeng 7278c9c19b cfq-iosched: don't check cfqg in choose_service_tree()
When cfq_choose_cfqg() is called in select_queue(), there must be at least one
backlogged CFQ queue waiting for dispatching, hence there must be at least one
backlogged CFQ group on service tree. So we never call choose_service_tree()
with cfqg == NULL.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-12-17 08:57:14 +01:00
Mike Snitzer 72d4cd9f38 block: max hardware sectors limit wrapper
Implement blk_limits_max_hw_sectors() and make
blk_queue_max_hw_sectors() a wrapper around it.

DM needs this to avoid setting queue_limits' max_hw_sectors and
max_sectors directly.  dm_set_device_limits() now leverages
blk_limits_max_hw_sectors() logic to establish the appropriate
max_hw_sectors minimum (PAGE_SIZE).  Fixes issue where DM was
incorrectly setting max_sectors rather than max_hw_sectors (which
caused dm_merge_bvec()'s max_hw_sectors check to be ineffective).

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@kernel.org
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-12-17 08:36:01 +01:00
Martin K. Petersen e692cb668f block: Deprecate QUEUE_FLAG_CLUSTER and use queue_limits instead
When stacking devices, a request_queue is not always available. This
forced us to have a no_cluster flag in the queue_limits that could be
used as a carrier until the request_queue had been set up for a
metadevice.

There were several problems with that approach. First of all it was up
to the stacking device to remember to set queue flag after stacking had
completed. Also, the queue flag and the queue limits had to be kept in
sync at all times. We got that wrong, which could lead to us issuing
commands that went beyond the max scatterlist limit set by the driver.

The proper fix is to avoid having two flags for tracking the same thing.
We deprecate QUEUE_FLAG_CLUSTER and use the queue limit directly in the
block layer merging functions. The queue_limit 'no_cluster' is turned
into 'cluster' to avoid double negatives and to ease stacking.
Clustering defaults to being enabled as before. The queue flag logic is
removed from the stacking function, and explicitly setting the cluster
flag is no longer necessary in DM and MD.

Reported-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-12-17 08:35:53 +01:00
Tejun Heo 77ea887e43 implement in-kernel gendisk events handling
Currently, media presence polling for removeable block devices is done
from userland.  There are several issues with this.

* Polling is done by periodically opening the device.  For SCSI
  devices, the command sequence generated by such action involves a
  few different commands including TEST_UNIT_READY.  This behavior,
  while perfectly legal, is different from Windows which only issues
  single command, GET_EVENT_STATUS_NOTIFICATION.  Unfortunately, some
  ATAPI devices lock up after being periodically queried such command
  sequences.

* There is no reliable and unintrusive way for a userland program to
  tell whether the target device is safe for media presence polling.
  For example, polling for media presence during an on-going burning
  session can make it fail.  The polling program can avoid this by
  opening the device with O_EXCL but then it risks making a valid
  exclusive user of the device fail w/ -EBUSY.

* Userland polling is unnecessarily heavy and in-kernel implementation
  is lighter and better coordinated (workqueue, timer slack).

This patch implements framework for in-kernel disk event handling,
which includes media presence polling.

* bdops->check_events() is added, which supercedes ->media_changed().
  It should check whether there's any pending event and return if so.
  Currently, two events are defined - DISK_EVENT_MEDIA_CHANGE and
  DISK_EVENT_EJECT_REQUEST.  ->check_events() is guaranteed not to be
  called parallelly.

* gendisk->events and ->async_events are added.  These should be
  initialized by block driver before passing the device to add_disk().
  The former contains the mask of all supported events and the latter
  the mask of all events which the device can report without polling.
  /sys/block/*/events[_async] export these to userland.

* Kernel parameter block.events_dfl_poll_msecs controls the system
  polling interval (default is 0 which means disable) and
  /sys/block/*/events_poll_msecs control polling intervals for
  individual devices (default is -1 meaning use system setting).  Note
  that if a device can report all supported events asynchronously and
  its polling interval isn't explicitly set, the device won't be
  polled regardless of the system polling interval.

* If a device is opened exclusively with write access, event checking
  is automatically disabled until all write exclusive accesses are
  released.

* There are event 'clearing' events.  For example, both of currently
  defined events are cleared after the device has been successfully
  opened.  This information is passed to ->check_events() callback
  using @clearing argument as a hint.

* Event checking is always performed from system_nrt_wq and timer
  slack is set to 25% for polling.

* Nothing changes for drivers which implement ->media_changed() but
  not ->check_events().  Going forward, all drivers will be converted
  to ->check_events() and ->media_change() will be dropped.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-12-16 17:53:38 +01:00
Tejun Heo d2bf1b6723 block: move register_disk() and del_gendisk() to block/genhd.c
There's no reason for register_disk() and del_gendisk() to be in
fs/partitions/check.c.  Move both to genhd.c.  While at it, collapse
unlink_gendisk(), which was artificially in a separate function due to
genhd.c / check.c split, into del_gendisk().

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-12-16 17:53:38 +01:00
Tejun Heo dddd9dc340 block: kill genhd_media_change_notify()
There's no user of the facility.  Kill it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-12-16 17:53:38 +01:00
Shaohua Li writes e4ea0c16a8 block cfq: select new workload if priority changed
If priority is changed, continuing to check workload_expires and service tree
count of the previous workload does not make sense. We should always choose
the workload with lowest key of new priority in such case.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-12-13 14:32:22 +01:00
James Smart c7a841f3ac [SCSI] bsg: correct fault if queue object removed while dev_t open
This patch corrects an issue in bsg that results in a general protection
fault if an LLD is removed while an application is using an open file
handle to a bsg device, and the application issues an ioctl. The fault
occurs because the class_dev is NULL, having been cleared in
bsg_unregister_queue() when the driver was removed.  With this
patch, a check is made for the class_dev, and the application
will receive ENXIO if the related object is gone.

Signed-off-by: Carl Lajeunesse <carl.lajeunesse@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-09 09:41:14 -06:00
Vivek Goyal 04a6b516cd blk-throttle: Correct the placement of smp_rmb()
o I was discussing what are the variable being updated without spin lock and
  why do we need barriers and Oleg pointed out that location of smp_rmb()
  should be between read of td->limits_changed and tg->limits_changed. This
  patch fixes it.

o Following is one possible sequence of events. Say cpu0 is executing
  throtl_update_blkio_group_read_bps() and cpu1 is executing
  throtl_process_limit_change().

 cpu0                                                cpu1

 tg->limits_changed = true;
 smp_mb__before_atomic_inc();
 atomic_inc(&td->limits_changed);

                                     if (!atomic_read(&td->limits_changed))
                                             return;

                                     if (tg->limits_changed)
                                             do_something;

 If cpu0 has updated tg->limits_changed and td->limits_changed, we want to
 make sure that if update to td->limits_changed is visible on cpu1, then
 update to tg->limits_changed should also be visible.

 Oleg pointed out to ensure that we need to insert an smp_rmb() between
 td->limits_changed read and tg->limits_changed read.

o I had erroneously put smp_rmb() before atomic_read(&td->limits_changed).
  This patch fixes it.

Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-12-01 19:34:52 +01:00
Vivek Goyal d1ae8ffdfa blk-throttle: Trim/adjust slice_end once a bio has been dispatched
o During some testing I did following and noticed throttling stops working.

        - Put a very low limit on a cgroup, say 1 byte per second.
        - Start some reads, this will set slice_end to a very high value.
        - Change the limit to higher value say 1MB/s
        - Now IO unthrottles and finishes as expected.
        - Try to do the read again but IO is not limited to 1MB/s as expected.

o What is happening.
        - Initially low value of limit sets slice_end to a very high value.
        - During updation of limit, slice_end is not being truncated.
        - Very high value of slice_end leads to keeping the existing slice
          valid for a very long time and new slice does not start.
        - tg_may_dispatch() is called in blk_throtle_bio(), and trim_slice()
          is not called in this path. So slice_start is some old value and
          practically we are able to do huge amount of IO.

o There are many ways it can be fixed. I have fixed it by trying to
  adjust/cleanup slice_end in trim_slice(). Generally we extend slices if bio
  is big and can't be dispatched in one slice. After dispatch of bio, readjust
  the slice_end to make sure we don't end up with huge values.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-12-01 19:34:46 +01:00
Gui Jianfeng 760701bfe1 cfq-iosched: Get rid of on_st flag
It's able to check whether a CFQ group on a service tree by
checking "cfqg->rb_node". There's no need to maintain an
extra flag here.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-30 20:52:47 +01:00
Gui Jianfeng b54ce60eb7 cfq-iosched: Get rid of st->active
When a cfq group is running, it won't be dequeued from service tree, so
there's no need to store the active one in st->active. Just gid rid of it.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-30 20:52:46 +01:00
Xiaotian Feng 5478755616 block: check for proper length of iov entries earlier in blk_rq_map_user_iov()
commit 9284bcf checks for proper length of iov entries in
blk_rq_map_user_iov(). But if the map is unaligned, kernel
will break out the loop without checking for the proper length.
So we need to check the proper length before the unalign check.

Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-29 10:04:50 +01:00
Jens Axboe f30195c502 Merge branch 'cleanup-bd_claim' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc into for-2.6.38/core 2010-11-27 19:49:18 +01:00
Linus Torvalds 78daa87b1d Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  cciss: fix build for PROC_FS disabled
  block: fix amiga and atari floppy driver compile warning
  blk-throttle: Fix calculation of max number of WRITES to be dispatched
  ioprio: grab rcu_read_lock in sys_ioprio_{set,get}()
  xen/blkfront: cope with backend that fail empty BLKIF_OP_WRITE_BARRIER requests
  xen/blkfront: Implement FUA with BLKIF_OP_WRITE_BARRIER
  xen/blkfront: change blk_shadow.request to proper pointer
  xen/blkfront: map REQ_FLUSH into a full barrier
2010-11-27 07:17:50 +09:00
Arnd Bergmann 451a3c24b0 BKL: remove extraneous #include <smp_lock.h>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-17 08:59:32 -08:00
Mike Snitzer d07335e51d block: Rename "block_remap" tracepoint to "block_bio_remap" to clarify the event.
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-16 12:53:39 +01:00
Jens Axboe 5fbf856392 Merge branch 'for-2.6.38/rc2-holder' into for-2.6.38/core 2010-11-16 10:10:12 +01:00
Jens Axboe a02056349c Merge branch 'v2.6.37-rc2' into for-2.6.38/core 2010-11-16 10:09:42 +01:00
Vivek Goyal bdc85df7a8 blk-cgroup: Allow creation of hierarchical cgroups
o Allow hierarchical cgroup creation for blkio controller

o Currently we disallow it as both the io controller policies (throttling
  as well as proportion bandwidth) do not support hierarhical accounting
  and control. But the flip side is that blkio controller can not be used with
  libvirt as libvirt creates a cgroup hierarchy deeper than 1 level.

  <top-level-cgroup-dir>/<controller>/libvirt/qemu/<virtual-machine-groups>

o So this patch will allow creation of cgroup hierarhcy but at the backend
  everything will be treated as flat. So if somebody created a an hierarchy
  like as follows.

			root
			/  \
		     test1 test2
			|
		     test3

  CFQ and throttling will practically treat all groups at same level.

				pivot
			     /  |   \  \
			root  test1 test2  test3

o Once we have actual support for hierarchical accounting and control
  then we can introduce another cgroup tunable file "blkio.use_hierarchy"
  which will be 0 by default but if user wants to enforce hierarhical
  control then it can be set to 1. This way there should not be any
  ABI problems down the line.

o The only not so pretty part is introduction of extra file "use_hierarchy"
  down the line. Kame-san had mentioned that hierarhical accounting is
  expensive in memory controller hence they keep it off by default. I
  suspect same will be the case for IO controller also as for each IO
  completion we shall have to account IO through hierarchy up to the root.
  if yes, then it probably is not a very bad idea to introduce this extra
  file so that it will be used only when somebody needs it and some people
  might enable hierarchy only in part of the hierarchy.

o This is how basically memory controller also uses "use_hierarhcy" and
  they also allowed creation of hierarchies when actual backend support
  was not available.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Reviewed-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Reviewed-by: Ciju Rajan K <ciju@linux.vnet.ibm.com>
Tested-by: Ciju Rajan K <ciju@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-15 19:37:36 +01:00
Vivek Goyal c2f6805d47 blk-throttle: Fix calculation of max number of WRITES to be dispatched
o Currently we try to dispatch more READS and less WRITES (75%, 25%) in one
  dispatch round. ummy pointed out that there is a bug in max_nr_writes
  calculation. This patch fixes it.

Reported-by: ummy y <yummylln@yahoo.com.cn>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-15 19:32:42 +01:00
Tejun Heo e525fd89d3 block: make blkdev_get/put() handle exclusive access
Over time, block layer has accumulated a set of APIs dealing with bdev
open, close, claim and release.

* blkdev_get/put() are the primary open and close functions.

* bd_claim/release() deal with exclusive open.

* open/close_bdev_exclusive() are combination of open and claim and
  the other way around, respectively.

* bd_link/unlink_disk_holder() to create and remove holder/slave
  symlinks.

* open_by_devnum() wraps bdget() + blkdev_get().

The interface is a bit confusing and the decoupling of open and claim
makes it impossible to properly guarantee exclusive access as
in-kernel open + claim sequence can disturb the existing exclusive
open even before the block layer knows the current open if for another
exclusive access.  Reorganize the interface such that,

* blkdev_get() is extended to include exclusive access management.
  @holder argument is added and, if is @FMODE_EXCL specified, it will
  gain exclusive access atomically w.r.t. other exclusive accesses.

* blkdev_put() is similarly extended.  It now takes @mode argument and
  if @FMODE_EXCL is set, it releases an exclusive access.  Also, when
  the last exclusive claim is released, the holder/slave symlinks are
  removed automatically.

* bd_claim/release() and close_bdev_exclusive() are no longer
  necessary and either made static or removed.

* bd_link_disk_holder() remains the same but bd_unlink_disk_holder()
  is no longer necessary and removed.

* open_bdev_exclusive() becomes a simple wrapper around lookup_bdev()
  and blkdev_get().  It also has an unexpected extra bdev_read_only()
  test which probably should be moved into blkdev_get().

* open_by_devnum() is modified to take @holder argument and pass it to
  blkdev_get().

Most of bdev open/close operations are unified into blkdev_get/put()
and most exclusive accesses are tested atomically at the open time (as
it should).  This cleans up code and removes some, both valid and
invalid, but unnecessary all the same, corner cases.

open_bdev_exclusive() and open_by_devnum() can use further cleanup -
rename to blkdev_get_by_path() and blkdev_get_by_devt() and drop
special features.  Well, let's leave them for another day.

Most conversions are straight-forward.  drbd conversion is a bit more
involved as there was some reordering, but the logic should stay the
same.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Brown <neilb@suse.de>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Peter Osterlund <petero2@telia.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Alex Elder <aelder@sgi.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: dm-devel@redhat.com
Cc: drbd-dev@lists.linbit.com
Cc: Leo Chen <leochen@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: Joern Engel <joern@logfs.org>
Cc: reiserfs-devel@vger.kernel.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
2010-11-13 11:55:17 +01:00
Jens Axboe cedb4a7d9f block: remove unused copy_io_context()
Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-11 13:40:11 +01:00
Christoph Hellwig 02e031cbc8 block: remove REQ_HARDBARRIER
REQ_HARDBARRIER is dead now, so remove the leftovers.  What's left
at this point is:

 - various checks inside the block layer.
 - sanity checks in bio based drivers.
 - now unused bio_empty_barrier helper.
 - Xen blockfront use of BLKIF_OP_WRITE_BARRIER - it's dead for a while,
   but Xen really needs to sort out it's barrier situaton.
 - setting of ordered tags in uas - dead code copied from old scsi
   drivers.
 - scsi different retry for barriers - it's dead and should have been
   removed when flushes were converted to FS requests.
 - blktrace handling of barriers - removed.  Someone who knows blktrace
   better should add support for REQ_FLUSH and REQ_FUA, though.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-10 14:54:09 +01:00
Vasiliy Kulikov a014741c0a block: ioctl: fix information leak to userland
Structure hd_geometry is copied to userland with 4 padding bytes
between cylinders and start fields uninitialized on 64-bit platforms.
It leads to leaking of contents of kernel stack memory.

Currently there is no memset() in real implementations of getgeo()
in drivers/block/, so it makes sense to have memset() in blkdev_ioctl().

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-10 14:40:53 +01:00
Mike Snitzer 77304d2aba block: read i_size with i_size_read()
Convert direct reads of an inode's i_size to using i_size_read().

i_size_{read,write} use a seqcount to protect reads from accessing
incomple writes.  Concurrent i_size_write()s require mutual exclussion
to protect the seqcount that is used by i_size_{read,write}.  But
i_size_read() callers do not need to use additional locking.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: NeilBrown <neilb@suse.de>
Acked-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-10 14:40:53 +01:00
Jens Axboe 9f864c8091 block: take care not to overflow when calculating total iov length
Reported-by: Dan Rosenberg <drosenberg@vsecurity.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-10 14:40:42 +01:00
Jens Axboe 9284bcf4e3 block: check for proper length of iov entries in blk_rq_map_user_iov()
Ensure that we pass down properly validated iov segments before
calling into the mapping or copy functions.

Reported-by: Dan Rosenberg <drosenberg@vsecurity.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-10 14:40:42 +01:00
Shaohua Li 2b9408a459 cfq-iosched: don't schedule a dispatch for a non-idle queue
Vivek suggests we don't need schedule a dispatch when an idle queue
becomes nonidle. And he is right, cfq_should_preempt already covers
the logic.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-09 14:51:13 +01:00
Shaohua Li 8e1ac66551 cfq-iosched: don't idle if a deep seek queue is slow
If a deep seek queue slowly deliver requests but disk is much faster, idle
for the queue just wastes disk throughput. If the queue delevers all requests
before half its slice is used, the patch disable idle for it.
In my test, application delivers 32 requests one time, the disk can accept
128 requests at maxium and disk is fast. without the patch, the throughput
is just around 30m/s, while with it, the speed is about 80m/s. The disk is
a SSD, but is detected as a rotational disk. I can configure it as SSD, but
I thought the deep seek queue logic should be fixed too, for example,
considering a fast raid.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-08 15:01:04 +01:00
Shaohua Li d2d59e18a1 cfq-iosched: schedule dispatch for noidle queue
A queue is idle at cfq_dispatch_requests(), but it gets noidle later. Unless
other task explictly does unplug or all requests are drained, we will not
deliever requests to the disk even cfq_arm_slice_timer doesn't make the
queue idle. For example, cfq_should_idle() returns true because of
service_tree->count == 1, and then other queues are added. Note, I didn't
see obvious performance impacts so far with the patch, but just thought
this could be a problem.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-08 15:01:03 +01:00
Shaohua Li c1e44756fd cfq-iosched: do cleanup
Some functions should return boolean.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-11-08 15:01:02 +01:00
Uwe Kleine-König b595076a18 tree-wide: fix comment/printk typos
"gadget", "through", "command", "maintain", "maintain", "controller", "address",
"between", "initiali[zs]e", "instead", "function", "select", "already",
"equal", "access", "management", "hierarchy", "registration", "interest",
"relative", "memory", "offset", "already",

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-01 15:38:34 -04:00
Linus Torvalds 8e775167d5 Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  Revert "block: fix accounting bug on cross partition merges"
2010-10-25 07:45:10 -07:00
Linus Torvalds 229aebb873 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  Update broken web addresses in arch directory.
  Update broken web addresses in the kernel.
  Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget
  Revert "Fix typo: configuation => configuration" partially
  ida: document IDA_BITMAP_LONGS calculation
  ext2: fix a typo on comment in ext2/inode.c
  drivers/scsi: Remove unnecessary casts of private_data
  drivers/s390: Remove unnecessary casts of private_data
  net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data
  drivers/infiniband: Remove unnecessary casts of private_data
  drivers/gpu/drm: Remove unnecessary casts of private_data
  kernel/pm_qos_params.c: Remove unnecessary casts of private_data
  fs/ecryptfs: Remove unnecessary casts of private_data
  fs/seq_file.c: Remove unnecessary casts of private_data
  arm: uengine.c: remove C99 comments
  arm: scoop.c: remove C99 comments
  Fix typo configue => configure in comments
  Fix typo: configuation => configuration
  Fix typo interrest[ing|ed] => interest[ing|ed]
  Fix various typos of valid in comments
  ...

Fix up trivial conflicts in:
	drivers/char/ipmi/ipmi_si_intf.c
	drivers/usb/gadget/rndis.c
	net/irda/irnet/irnet_ppp.c
2010-10-24 13:41:39 -07:00
Jens Axboe f253b86b4a Revert "block: fix accounting bug on cross partition merges"
This reverts commit 7681bfeecc.

Conflicts:

	include/linux/genhd.h

It has numerous issues with the cleanup path and non-elevator
devices. Revert it for now so we can come up with a clean
version without rushing things.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-24 22:06:02 +02:00
Jens Axboe 7ad58c0286 block: fix use-after-free bug in blk throttle code
blk_throtl_exit() frees the throttle data hanging off the queue
in blk_cleanup_queue(), but blk_put_queue() will indirectly
dereference this data when calling blk_sync_queue() which in
turns calls throtl_shutdown_timer_wq().

Fix this by moving the freeing of the throttle data to when
the queue is truly being released, and post the call to
blk_sync_queue().

Reported-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-23 20:40:26 +02:00
Linus Torvalds b9da057105 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (31 commits)
  driver core: Display error codes when class suspend fails
  Driver core: Add section count to memory_block struct
  Driver core: Add mutex for adding/removing memory blocks
  Driver core: Move find_memory_block routine
  hpilo: Despecificate driver from iLO generation
  driver core: Convert link_mem_sections to use find_memory_block_hinted.
  driver core: Introduce find_memory_block_hinted which utilizes kset_find_obj_hinted.
  kobject: Introduce kset_find_obj_hinted.
  driver core: fix build for CONFIG_BLOCK not enabled
  driver-core: base: change to new flag variable
  sysfs: only access bin file vm_ops with the active lock
  sysfs: Fail bin file mmap if vma close is implemented.
  FW_LOADER: fix kconfig dependency warning on HOTPLUG
  uio: Statically allocate uio_class and use class .dev_attrs.
  uio: Support 2^MINOR_BITS minors
  uio: Cleanup irq handling.
  uio: Don't clear driver data
  uio: Fix lack of locking in init_uio_class
  SYSFS: Allow boot time switching between deprecated and modern sysfs layout
  driver core: remove CONFIG_SYSFS_DEPRECATED_V2 but keep it for block devices
  ...
2010-10-22 19:36:42 -07:00
Linus Torvalds a2887097f2 Merge branch 'for-2.6.37/barrier' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.37/barrier' of git://git.kernel.dk/linux-2.6-block: (46 commits)
  xen-blkfront: disable barrier/flush write support
  Added blk-lib.c and blk-barrier.c was renamed to blk-flush.c
  block: remove BLKDEV_IFL_WAIT
  aic7xxx_old: removed unused 'req' variable
  block: remove the BH_Eopnotsupp flag
  block: remove the BLKDEV_IFL_BARRIER flag
  block: remove the WRITE_BARRIER flag
  swap: do not send discards as barriers
  fat: do not send discards as barriers
  ext4: do not send discards as barriers
  jbd2: replace barriers with explicit flush / FUA usage
  jbd2: Modify ASYNC_COMMIT code to not rely on queue draining on barrier
  jbd: replace barriers with explicit flush / FUA usage
  nilfs2: replace barriers with explicit flush / FUA usage
  reiserfs: replace barriers with explicit flush / FUA usage
  gfs2: replace barriers with explicit flush / FUA usage
  btrfs: replace barriers with explicit flush / FUA usage
  xfs: replace barriers with explicit flush / FUA usage
  block: pass gfp_mask and flags to sb_issue_discard
  dm: convey that all flushes are processed as empty
  ...
2010-10-22 17:07:18 -07:00
Linus Torvalds e9dd2b6837 Merge branch 'for-2.6.37/core' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.37/core' of git://git.kernel.dk/linux-2.6-block: (39 commits)
  cfq-iosched: Fix a gcc 4.5 warning and put some comments
  block: Turn bvec_k{un,}map_irq() into static inline functions
  block: fix accounting bug on cross partition merges
  block: Make the integrity mapped property a bio flag
  block: Fix double free in blk_integrity_unregister
  block: Ensure physical block size is unsigned int
  blkio-throttle: Fix possible multiplication overflow in iops calculations
  blkio-throttle: limit max iops value to UINT_MAX
  blkio-throttle: There is no need to convert jiffies to milli seconds
  blkio-throttle: Fix link failure failure on i386
  blkio: Recalculate the throttled bio dispatch time upon throttle limit change
  blkio: Add root group to td->tg_list
  blkio: deletion of a cgroup was causes oops
  blkio: Do not export throttle files if CONFIG_BLK_DEV_THROTTLING=n
  block: set the bounce_pfn to the actual DMA limit rather than to max memory
  block: revert bad fix for memory hotplug causing bounces
  Fix compile error in blk-exec.c for !CONFIG_DETECT_HUNG_TASK
  block: set the bounce_pfn to the actual DMA limit rather than to max memory
  block: Prevent hang_check firing during long I/O
  cfq: improve fsync performance for small files
  ...

Fix up trivial conflicts due to __rcu sparse annotation in include/linux/genhd.h
2010-10-22 17:00:32 -07:00
Linus Torvalds 092e0e7e52 Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  vfs: make no_llseek the default
  vfs: don't use BKL in default_llseek
  llseek: automatically add .llseek fop
  libfs: use generic_file_llseek for simple_attr
  mac80211: disallow seeks in minstrel debug code
  lirc: make chardev nonseekable
  viotape: use noop_llseek
  raw: use explicit llseek file operations
  ibmasmfs: use generic_file_llseek
  spufs: use llseek in all file operations
  arm/omap: use generic_file_llseek in iommu_debug
  lkdtm: use generic_file_llseek in debugfs
  net/wireless: use generic_file_llseek in debugfs
  drm: use noop_llseek
2010-10-22 10:52:56 -07:00
Linus Torvalds c37927d435 Merge branch 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  block: autoconvert trivial BKL users to private mutex
  drivers: autoconvert trivial BKL users to private mutex
  ipmi: autoconvert trivial BKL users to private mutex
  mac: autoconvert trivial BKL users to private mutex
  mtd: autoconvert trivial BKL users to private mutex
  scsi: autoconvert trivial BKL users to private mutex

Fix up trivial conflicts (due to addition of private mutex right next to
deletion of a version string) in drivers/char/pcmcia/cm40[04]0_cs.c
2010-10-22 10:49:54 -07:00
Andi Kleen e52eec13cd SYSFS: Allow boot time switching between deprecated and modern sysfs layout
I have some systems which need legacy sysfs due to old tools that are
making assumptions that a directory can never be a symlink to another
directory, and it's a big hazzle to compile separate kernels for them.

This patch turns CONFIG_SYSFS_DEPRECATED into a run time option
that can be switched on/off the kernel command line. This way
the same binary can be used in both cases with just a option
on the command line.

The old CONFIG_SYSFS_DEPRECATED_V2 option is still there to set
the default. I kept the weird name to not break existing
config files.

Also the compat code can be still completely disabled by undefining
CONFIG_SYSFS_DEPRECATED_SWITCH -- just the optimizer takes
care of this now instead of lots of ifdefs. This makes the code
look nicer.

v2: This is an updated version on top of Kay's patch to only
handle the block devices. I tested it on my old systems
and that seems to work.

Cc: axboe@kernel.dk
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22 10:16:43 -07:00
Vivek Goyal b4627321e1 cfq-iosched: Fix a gcc 4.5 warning and put some comments
- Andi encountedred following warning with gcc 4.5

  linux/block/cfq-iosched.c: In function ‘cfq_dispatch_requests’:
  linux/block/cfq-iosched.c:2156:3: warning: array subscript is above array
  bounds

- Warning happens due to following code.

  slice = group_slice * count /
		max_t(unsigned, cfqg->busy_queues_avg[cfqd->serving_prio],
		cfq_group_busy_queues_wl(cfqd->serving_prio, cfqd, cfqg));

  gcc is complaining about cfqg->busy_queues_avg[] being indexed by CFQ
  prio classes (RT, BE and IDLE) while the array size is only 2.

- At run time, we never access cfqg->busy_queues_avg[IDLE] and return from
  function before this code hits.

- To fix warning increase the array size though it will remain unused. This
  patch also puts some comments to clarify some of the confusions.

- I have taken Jens's patch and modified it a bit.

- Compile tested with gcc 4.4 and boot tested. I don't have gcc 4.5
  running, Andi can you please test it with gcc 4.5 to make sure it
  worked.

Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-22 09:48:43 +02:00
Linus Torvalds 30c278192f Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] bsg: fix incorrect device_status value
  [SCSI] Fix VPD inquiry page wrapper
2010-10-20 13:13:09 -07:00
Jens Axboe fa251f8990 Merge branch 'v2.6.36-rc8' into for-2.6.37/barrier
Conflicts:
	block/blk-core.c
	drivers/block/loop.c
	mm/swapfile.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-19 09:13:04 +02:00
Yasuaki Ishimatsu 7681bfeecc block: fix accounting bug on cross partition merges
/proc/diskstats would display a strange output as follows.

$ cat /proc/diskstats |grep sda
   8       0 sda 90524 7579 102154 20464 0 0 0 0 0 14096 20089
   8       1 sda1 19085 1352 21841 4209 0 0 0 0 4294967064 15689 4293424691
                                                ~~~~~~~~~~
   8       2 sda2 71252 3624 74891 15950 0 0 0 0 232 23995 1562390
   8       3 sda3 54 487 2188 92 0 0 0 0 0 88 92
   8       4 sda4 4 0 8 0 0 0 0 0 0 0 0
   8       5 sda5 81 2027 2130 138 0 0 0 0 0 87 137

Its reason is the wrong way of accounting hd_struct->in_flight. When a bio is
merged into a request belongs to different partition by ELEVATOR_FRONT_MERGE.

The detailed root cause is as follows.

Assuming that there are two partition, sda1 and sda2.

1. A request for sda2 is in request_queue. Hence sda1's hd_struct->in_flight
   is 0 and sda2's one is 1.

        | hd_struct->in_flight
   ---------------------------
   sda1 |          0
   sda2 |          1
   ---------------------------

2. A bio belongs to sda1 is issued and is merged into the request mentioned on
   step1 by ELEVATOR_BACK_MERGE. The first sector of the request is changed
   from sda2 region to sda1 region. However the two partition's
   hd_struct->in_flight are not changed.

        | hd_struct->in_flight
   ---------------------------
   sda1 |          0
   sda2 |          1
   ---------------------------

3. The request is finished and blk_account_io_done() is called. In this case,
   sda2's hd_struct->in_flight, not a sda1's one, is decremented.

        | hd_struct->in_flight
   ---------------------------
   sda1 |         -1
   sda2 |          1
   ---------------------------

The patch fixes the problem by caching the partition lookup
inside the request structure, hence making sure that the increment
and decrement will always happen on the same partition struct. This
also speeds up IO with accounting enabled, since it cuts down on
the number of lookups we have to do.

When reloading partition tables, quiesce IO to ensure that no
request references to the partition struct exists. When it is safe
to free the partition table, the IO for that device is restarted
again.

Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-19 09:07:02 +02:00
FUJITA Tomonori 478971600e [SCSI] bsg: fix incorrect device_status value
bsg incorrectly returns sg's masked_status value for device_status.

[jejb: fix up expression logic]
Reported-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-15 10:18:48 -04:00
Arnd Bergmann 6038f373a3 llseek: automatically add .llseek fop
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.

The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.

New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time.  Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.

The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.

Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.

Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.

===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
//   but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}

@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}

@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
   *off = E
|
   *off += E
|
   func(..., off, ...)
|
   E = *off
)
...+>
}

@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}

@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
  *off = E
|
  *off += E
|
  func(..., off, ...)
|
  E = *off
)
...+>
}

@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}

@ fops0 @
identifier fops;
@@
struct file_operations fops = {
 ...
};

@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
 .llseek = llseek_f,
...
};

@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
 .read = read_f,
...
};

@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
 .write = write_f,
...
};

@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
 .open = open_f,
...
};

// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
...  .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};

@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
...  .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};

// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
...  .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};

// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};

// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};

@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+	.llseek = default_llseek, /* write accesses f_pos */
};

// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////

@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
 .write = write_f,
 .read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};

@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};

@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};

@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
2010-10-15 15:53:27 +02:00
Martin K. Petersen e817bf3f68 block: Fix double free in blk_integrity_unregister
Commit 3839e4b introduced a kobject_put but failed to remove the
kmem_cache_free beneath it, leading to a double free.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-15 15:49:18 +02:00
Martin K. Petersen 892b6f90db block: Ensure physical block size is unsigned int
Physical block size was declared unsigned int to accomodate the maximum
size reported by READ CAPACITY(16).  Make sure we use the right type in
the related functions.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-13 21:19:12 +02:00
Jens Axboe 430c62fb29 elevator: fix oops on early call to elevator_change()
2.6.36 introduces an API for drivers to switch the IO scheduler
instead of manually calling the elevator exit and init functions.
This API was added since q->elevator must be cleared in between
those two calls. And since we already have this functionality
directly from use by the sysfs interface to switch schedulers
online, it was prudent to reuse it internally too.

But this API needs the queue to be in a fully initialized state
before it is called, or it will attempt to unregister elevator
kobjects before they have been added. This results in an oops
like this:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000051
IP: [<ffffffff8116f15e>] sysfs_create_dir+0x2e/0xc0
PGD 47ddfc067 PUD 47c6a1067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:02.0/0000:04:00.1/irq
CPU 2
Modules linked in: t(+) loop hid_apple usbhid ahci ehci_hcd uhci_hcd libahci usbcore nls_base igb

Pid: 7319, comm: modprobe Not tainted 2.6.36-rc6+ #132 QSSC-S4R/QSSC-S4R
RIP: 0010:[<ffffffff8116f15e>]  [<ffffffff8116f15e>] sysfs_create_dir+0x2e/0xc0
RSP: 0018:ffff88027da25d08  EFLAGS: 00010246
RAX: ffff88047c68c528 RBX: 00000000fffffffe RCX: 0000000000000000
RDX: 000000000000002f RSI: 000000000000002f RDI: ffff88047e196c88
RBP: ffff88027da25d38 R08: 0000000000000000 R09: d84156c5635688c0
R10: d84156c5635688c0 R11: 0000000000000000 R12: ffff88047e196c88
R13: 0000000000000000 R14: 0000000000000000 R15: ffff88047c68c528
FS:  00007fcb0b26f6e0(0000) GS:ffff880287400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000051 CR3: 000000047e76e000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process modprobe (pid: 7319, threadinfo ffff88027da24000, task ffff88027d377090)
Stack:
 ffff88027da25d58 ffff88047c68c528 00000000fffffffe ffff88047e196c88
<0> ffff88047c68c528 ffff88047e05bd90 ffff88027da25d78 ffffffff8123fb77
<0> ffff88047e05bd90 0000000000000000 ffff88047e196c88 ffff88047c68c528
Call Trace:
 [<ffffffff8123fb77>] kobject_add_internal+0xe7/0x1f0
 [<ffffffff8123fd98>] kobject_add_varg+0x38/0x60
 [<ffffffff8123feb9>] kobject_add+0x69/0x90
 [<ffffffff8116efe0>] ? sysfs_remove_dir+0x20/0xa0
 [<ffffffff8103d48d>] ? sub_preempt_count+0x9d/0xe0
 [<ffffffff8143de20>] ? _raw_spin_unlock+0x30/0x50
 [<ffffffff8116efe0>] ? sysfs_remove_dir+0x20/0xa0
 [<ffffffff8116eff4>] ? sysfs_remove_dir+0x34/0xa0
 [<ffffffff81224204>] elv_register_queue+0x34/0xa0
 [<ffffffff81224aad>] elevator_change+0xfd/0x250
 [<ffffffffa007e000>] ? t_init+0x0/0x361 [t]
 [<ffffffffa007e000>] ? t_init+0x0/0x361 [t]
 [<ffffffffa007e0a8>] t_init+0xa8/0x361 [t]
 [<ffffffff810001de>] do_one_initcall+0x3e/0x170
 [<ffffffff8108c3fd>] sys_init_module+0xbd/0x220
 [<ffffffff81002f2b>] system_call_fastpath+0x16/0x1b
Code: e5 41 56 41 55 41 54 49 89 fc 53 48 83 ec 10 48 85 ff 74 52 48 8b 47 18 49 c7 c5 00 46 61 81 48 85 c0 74 04 4c 8b 68 30 45 31 f6 <41> 80 7d 51 00 74 0e 49 8b 44 24 28 4c 89 e7 ff 50 20 49 89 c6
RIP  [<ffffffff8116f15e>] sysfs_create_dir+0x2e/0xc0
 RSP <ffff88027da25d08>
CR2: 0000000000000051
---[ end trace a6541d3bf07945df ]---

Fix this by adding a registered bit to the elevator queue, which is
set when the sysfs kobjects have been registered.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-07 09:35:16 +02:00
Arnd Bergmann 2a48fc0ab2 block: autoconvert trivial BKL users to private mutex
The block device drivers have all gained new lock_kernel
calls from a recent pushdown, and some of the drivers
were already using the BKL before.

This turns the BKL into a set of per-driver mutexes.
Still need to check whether this is safe to do.

file=$1
name=$2
if grep -q lock_kernel ${file} ; then
    if grep -q 'include.*linux.mutex.h' ${file} ; then
            sed -i '/include.*<linux\/smp_lock.h>/d' ${file}
    else
            sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file}
    fi
    sed -i ${file} \
        -e "/^#include.*linux.mutex.h/,$ {
                1,/^\(static\|int\|long\)/ {
                     /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex);

} }"  \
    -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \
    -e '/[      ]*cycle_kernel_lock();/d'
else
    sed -i -e '/include.*\<smp_lock.h\>/d' ${file}  \
                -e '/cycle_kernel_lock()/d'
fi

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-10-05 15:01:10 +02:00
Vivek Goyal c49c06e496 blkio-throttle: Fix possible multiplication overflow in iops calculations
o User can specify max iops value of 32bit (UINT_MAX), through cgroup
  interface. If a user has specified say 4294967294 (UNIT_MAX  - 2), then
  on 32bit platform, following multiplication can overflow.

  io_allowed = (tg->iops[rw] * jiffy_elapsed_rnd)

o Explicitly cast the multiplication to 64bit and then perform division and
  then check whether result is still great then UNINT_MAX.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-01 21:16:42 +02:00
Vivek Goyal 9355aede5a blkio-throttle: limit max iops value to UINT_MAX
- Limit max iops value to UINT_MAX and return error to user if value is more
  than that instead of accepting bigger values and truncating implicitly.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-01 21:16:41 +02:00
Vivek Goyal 5e901a2b95 blkio-throttle: There is no need to convert jiffies to milli seconds
o Do not convert jiffies to mili seconds as it is not required. Just work
  with jiffies and HZ.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-01 21:16:38 +02:00
Vivek Goyal 3aad5d3ee4 blkio-throttle: Fix link failure failure on i386
o Randy Dunlap reported following linux-next failure. This patch fixes it.

on i386:

blk-throttle.c:(.text+0x1abb8): undefined reference to `__udivdi3'
blk-throttle.c:(.text+0x1b1dc): undefined reference to `__udivdi3'

o bytes_per_second interface is 64bit and I was continuing to do 64 bit
  division even on 32bit platform without help of special macros/functions
  hence the failure.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-01 14:51:14 +02:00
Vivek Goyal fe0714377e blkio: Recalculate the throttled bio dispatch time upon throttle limit change
o Currently any cgroup throttle limit changes are processed asynchronousy and
  the change does not take affect till a new bio is dispatched from same group.

o It might happen that a user sets a redicuously low limit on throttling.
  Say 1 bytes per second on reads. In such cases simple operations like mount
  a disk can wait for a very long time.

o Once bio is throttled, there is no easy way to come out of that wait even if
  user increases the read limit later.

o This patch fixes it. Now if a user changes the cgroup limits, we recalculate
  the bio dispatch time according to new limits.

o Can't take queueu lock under blkcg_lock, hence after the change I wake
  up the dispatch thread again which recalculates the time. So there are some
  variables being synchronized across two threads without lock and I had to
  make use of barriers. Hoping I have used barriers correctly. Any review of
  memory barrier code especially will help.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-01 14:49:49 +02:00
Vivek Goyal 02977e4af7 blkio: Add root group to td->tg_list
o Currently all the dynamically allocated groups, except root grp is added
  to td->tg_list. This was not a problem so far but in next patch I will
  travel through td->tg_list to process any updates of limits on the group.
  If root group is not in tg_list, then root group's updates are not
  processed.

o It is better to root group also to tg_list instead of doing special
  processing for it during limit updates.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-01 14:49:48 +02:00
Vivek Goyal 61014e96e6 blkio: deletion of a cgroup was causes oops
o Now a cgroup list of blkg elements can contain blkg from multiple policies.
  Before sending an unlink event, make sure blkg belongs to they policy. If
  policy does not own the blkg, do not send update for this blkg.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-01 14:49:44 +02:00
Vivek Goyal 13f98250f5 blkio: Do not export throttle files if CONFIG_BLK_DEV_THROTTLING=n
Currently throttling related files were visible even if user had disabled
throttling using config options. It was switching off background throttling
of bio but not the cgroup files. This patch fixes it.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-01 14:49:41 +02:00
Malahal Naineni efb012b361 block: set the bounce_pfn to the actual DMA limit rather than to max memory
The bounce_pfn of the request queue in 64 bit systems is set to the
current max_low_pfn. Adding more memory later makes this incorrect.
Memory allocated beyond this boot time max_low_pfn appear to require
bounce buffers (bounce buffers are actually not allocated but used in
calculating segments that may result in "over max segments limit"
errors).

Signed-off-by: Malahal Naineni <malahal@us.ibm.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-01 14:45:27 +02:00
Jens Axboe 260a67a9e5 block: revert bad fix for memory hotplug causing bounces
Revert "block: set the bounce_pfn to the actual DMA limit rather than to max memory"

This reverts commit c49825facf.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-01 14:42:43 +02:00
Adrian Hunter f281fb5fe5 block: prevent merges of discard and write requests
Add logic to prevent two I/O requests being merged if
only one of them is a discard.  Ditto secure discard.

Without this fix, it is possible for write requests
to transform into discard requests.  For example:

  Submit bio 1 to discard 8 sectors from sector n
  Submit bio 2 to write 8 sectors from sector n + 16
  Submit bio 3 to write 8 sectors from sector n + 8

Bio 1 becomes request 1.  Bio 2 becomes request 2.
Bio 3 is merged with request 2, and then subsequently
request 2 is merged with request 1 resulting in just
one I/O request which discards all 24 sectors.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>

(Moved the checks above the position checks /Jens)

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-25 12:42:55 +02:00
Malahal Naineni c49825facf block: set the bounce_pfn to the actual DMA limit rather than to max memory
The bounce_pfn of the request queue in 64 bit systems is set to the
current max_low_pfn. Adding more memory later makes this incorrect.
Memory allocated beyond this boot time max_low_pfn appear to require
bounce buffers (bounce buffers are actually not allocated but used in
calculating segments that may result in "over max segments limit"
errors).

Signed-off-by: Malahal Naineni <malahal@us.ibm.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-24 20:27:16 +02:00
Mark Lord 4b1977698c block: Prevent hang_check firing during long I/O
During long I/O operations, the hang_check timer may fire,
trigger stack dumps that unnecessarily alarm the user.

Eg.  hdparm --security-erase NULL /dev/sdb  ## can take *hours* to complete

So, if hang_check is armed, we should wake up periodically
to prevent it from triggering.  This patch uses a wake-up interval
equal to half the hang_check timer period, which keeps overhead low enough.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-24 15:52:09 +02:00
Vivek Goyal 180be2a042 cfq-iosched: fix a kernel OOPs when usb key is inserted
Mike reported a kernel crash when a usb key hotplug is performed while all
kernel thrads are not in a root cgroup and are running in one of the child
cgroups of blkio controller.

	BUG: unable to handle kernel NULL pointer dereference at 0000002c
	IP: [<c11c7b08>] cfq_get_queue+0x232/0x412
	*pde = 00000000
	Oops: 0000 [#1] PREEMPT
	last sysfs file: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/host3/scsi_host/host3/uevent

	[..]
	Pid: 30039, comm: scsi_scan_3 Not tainted 2.6.35.2-fg.roam #1 Volvi2                         /Aspire 4315
	EIP: 0060:[<c11c7b08>] EFLAGS: 00010086 CPU: 0
	EIP is at cfq_get_queue+0x232/0x412
	EAX: f705f9c0 EBX: e977abac ECX: 00000000 EDX: 00000000
	ESI: f00da400 EDI: f00da4ec EBP: e977a800 ESP: dff8fd00
	 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
	Process scsi_scan_3 (pid: 30039, ti=dff8e000 task=f6b6c9a0 task.ti=dff8e000)
	Stack:
	 00000000 00000000 00000001 01ff0000 f00da508 00000000 f00da524 f00da540
	<0> e7994940 dd631750 f705f9c0 e977a820 e977ac44 f00da4d0 00000001 f6b6c9a0
	<0> 00000010 00008010 0000000b 00000000 00000001 e977a800 dd76fac0 00000246
	Call Trace:
	 [<c11c7f10>] ? cfq_set_request+0x228/0x34c
	 [<c11c7ce8>] ? cfq_set_request+0x0/0x34c
	 [<c11bb3b9>] ? elv_set_request+0xf/0x1c
	 [<c11bdd51>] ? get_request+0x1ad/0x22f
	 [<c11bddf2>] ? get_request_wait+0x1f/0x11a
	 [<c11d013b>] ? kvasprintf+0x33/0x3b
	 [<c127b537>] ? scsi_execute+0x1d/0x103
	 [<c127b675>] ? scsi_execute_req+0x58/0x83
	 [<c127c391>] ? scsi_probe_and_add_lun+0x188/0x7c2
	 [<c12718c6>] ? attribute_container_add_device+0x15/0xfa
	 [<c11c95d1>] ? kobject_get+0xf/0x13
	 [<c126d1db>] ? get_device+0x10/0x14
	 [<c127be93>] ? scsi_alloc_target+0x217/0x24d
	 [<c127cbd8>] ? __scsi_scan_target+0x95/0x480
	 [<c10204eb>] ? dequeue_entity+0x14/0x1fe
	 [<c1020491>] ? update_curr+0x165/0x1ab
	 [<c1020491>] ? update_curr+0x165/0x1ab
	 [<c127d00d>] ? scsi_scan_channel+0x4a/0x76
	 [<c127d0b0>] ? scsi_scan_host_selected+0x77/0xad
	 [<c127d13c>] ? do_scan_async+0x0/0x11a
	 [<c127d137>] ? do_scsi_scan_host+0x51/0x56
	 [<c127d13c>] ? do_scan_async+0x0/0x11a
	 [<c127d14a>] ? do_scan_async+0xe/0x11a
	 [<c127d13c>] ? do_scan_async+0x0/0x11a
	 [<c10354c5>] ? kthread+0x5e/0x63
	 [<c1035467>] ? kthread+0x0/0x63
	 [<c1002af6>] ? kernel_thread_helper+0x6/0x10
	Code: 44 24 1c 54 83 44 24 18 54 83 fa 03 75 94 8b 06 c7 86 64 02 00 00 01 00 00 00 83 e0 03 09 f0 89 06 8b 44 24 28 8b 90 58 01 00 00 <8b> 42 2c 85 c0 75 03 8b 42 08 8d 54 24 48 52 8d 4c 24 50 51 68
	EIP: [<c11c7b08>] cfq_get_queue+0x232/0x412 SS:ESP 0068:dff8fd00
	CR2: 000000000000002c
	---[ end trace 9a88306573f69b12 ]---

The problem here is that we don't have bdi->dev information available when
thread does some IO.  Hence when dev_name() tries to access bdi->dev, it
crashes.

This problem does not happen if kernel threads are in root group as root
group is statically allocated at device initialization time and we don't
hit this piece of code.

Fix it by delaying the filling of major and minor number information of
device in blk_group.  Initially a blk_group is created with 0 as device
information and this information is filled later once some more IO comes
in from same group.

Reported-by: Mike Kazantsev <mk.fraggod@gmail.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-21 11:49:17 +02:00
Benny Halevy a45dc2d2b8 block: fix blk_rq_map_kern bio direction flag
This bug was introduced in 7b6d91daee
"block: unify flags for struct bio and struct request"

Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-21 11:49:17 +02:00
Corrado Zoccolo 749ef9f842 cfq: improve fsync performance for small files
Fsync performance for small files achieved by cfq on high-end disks is
lower than what deadline can achieve, due to idling introduced between
the sync write happening in process context and the journal commit.

Moreover, when competing with a sequential reader, a process writing
small files and fsync-ing them is starved.

This patch fixes the two problems by:
- marking journal commits as WRITE_SYNC, so that they get the REQ_NOIDLE
  flag set,
- force all queues that have REQ_NOIDLE requests to be put in the noidle
  tree.

Having the queue associated to the fsync-ing process and the one associated
 to journal commits in the noidle tree allows:
- switching between them without idling,
- fairness vs. competing idling queues, since they will be serviced only
  after the noidle tree expires its slice.

Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Tested-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-20 15:24:50 +02:00
Christoph Hellwig dd3932eddf block: remove BLKDEV_IFL_WAIT
All the blkdev_issue_* helpers can only sanely be used for synchronous
caller.  To issue cache flushes or barriers asynchronously the caller needs
to set up a bio by itself with a completion callback to move the asynchronous
state machine ahead.  So drop the BLKDEV_IFL_WAIT flag that is always
specified when calling blkdev_issue_* and also remove the now unused flags
argument to blkdev_issue_flush and blkdev_issue_zeroout.  For
blkdev_issue_discard we need to keep it for the secure discard flag, which
gains a more descriptive name and loses the bitops vs flag confusion.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-16 20:52:58 +02:00
Signed-off-by: Jan Kara 01ea50638b block: Fix race during disk initialization
When a new disk is being discovered, add_disk() first ties the bdev to gendisk
(via register_disk()->blkdev_get()) and only after that calls
bdi_register_bdev(). Because register_disk() also creates disk's kobject, it
can happen that userspace manages to open and modify the device's data (or
inode) before its BDI is properly initialized leading to a warning in
__mark_inode_dirty().

Fix the problem by registering BDI early enough.

This patch addresses https://bugzilla.kernel.org/show_bug.cgi?id=16312

Cc: stable@kernel.org
Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-16 20:36:36 +02:00
Vivek Goyal 8e89d13f4e blkio: Implementation of IOPS limit logic
o core logic of implementing IOPS throttling.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-16 08:44:00 +02:00
Vivek Goyal 7702e8f45b blk-cgroup: cgroup changes for IOPS limit support
o cgroup changes for IOPS throttling rules.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-16 08:42:58 +02:00
Vivek Goyal e43473b7f2 blkio: Core implementation of throttle policy
o Actual implementation of throttling policy in block layer. Currently it
  implements READ and WRITE bytes per second throttling logic. IOPS throttling
  comes in later patches.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-16 08:42:52 +02:00
Vivek Goyal 4c9eefa16c blk-cgroup: Introduce cgroup changes for throttling policy
o cgroup chagnes for throttle policy.

o Introduces READ and WRITE bytes per second throttling rules.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-16 08:42:12 +02:00
Vivek Goyal 062a644d61 blk-cgroup: Prepare the base for supporting more than one IO control policies
o This patch prepares the base for introducing new IO control policies.
  Currently all the code is written knowing there is only one policy
  and that is proportional bandwidth. Creating infrastructure for newer
  policies to come in.

o Also there were many functions which were generated using macro. It was
  very confusing. Got rid of those.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-16 08:42:04 +02:00
Vivek Goyal af41d7bd9b blk-cgroup: Kill the header printed at the start of blkio.weight_device file
o Kill extra "dev weight" header which is printed when somebody reads
  blkio.weight_device file. This really seems to be out of convention. No other
  blkio files are printing any header at the start of file. I think it is ok
  to just print values and how to interpret values should be part of
  documentation.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-16 08:40:42 +02:00
Will Drewry b5af921ec0 init: add support for root devices specified by partition UUID
This is the third patch in a series which adds support for
storing partition metadata, optionally, off of the hd_struct.

One major use for that data is being able to resolve partition
by other identities than just the index on a block device.  Device
enumeration varies by platform and there's a benefit to being able
to use something like EFI GPT's GUIDs to determine the correct
block device and partition to mount as the root.

This change adds that support to root= by adding support for
the following syntax:

  root=PARTUUID=hex-uuid

Signed-off-by: Will Drewry <wad@chromium.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-15 16:14:03 +02:00
Will Drewry 6d1d8050b4 block, partition: add partition_meta_info to hd_struct
I'm reposting this patch series as v4 since there have been no additional
comments, and I cleaned up one extra bit of unneeded code (in 3/3). The patches
are against Linus's tree: 2bfc96a127
(2.6.36-rc3).

Would this patchset be suitable for inclusion in an mm branch?

This changes adds a partition_meta_info struct which itself contains a
union of structures that provide partition table specific metadata.

This change leaves the union empty. The subsequent patch includes an
implementation for CONFIG_EFI_PARTITION-based metadata.

Signed-off-by: Will Drewry <wad@chromium.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-15 16:13:18 +02:00
Namhyung Kim 144177991c block: fix an address space warning in blk-map.c
Change type of 2nd parameter of blk_rq_aligned() into unsigned long
and remove unnecessary casting. Now we can call it with 'uaddr'
instead of 'ubuf' in __blk_rq_map_user() so that it can remove
following warnings from sparse:

 block/blk-map.c:57:31: warning: incorrect type in argument 2 (different address spaces)
 block/blk-map.c:57:31:    expected void *addr
 block/blk-map.c:57:31:    got void [noderef] <asn:1>*ubuf

However blk_rq_map_kern() needs one more local variable to handle it.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-15 13:08:27 +02:00
San Mehat 8dcbdc742f block: block_dump: Add number of sectors to debug output
Signed-off-by: San Mehat <san@android.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-14 08:48:01 +02:00
Martin K. Petersen 13f05c8d8e block/scsi: Provide a limit on the number of integrity segments
Some controllers have a hardware limit on the number of protection
information scatter-gather list segments they can handle.

Introduce a max_integrity_segments limit in the block layer and provide
a new scsi_host_template setting that allows HBA drivers to provide a
value suitable for the hardware.

Add support for honoring the integrity segment limit when merging both
bios and requests.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@carl.home.kernel.dk>
2010-09-10 20:50:10 +02:00
Martin K. Petersen c8bf133682 Consolidate min_not_zero
We have several users of min_not_zero, each of them using their own
definition.  Move the define to kernel.h.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@carl.home.kernel.dk>
2010-09-10 20:07:38 +02:00
Christoph Hellwig 8c55536782 block: remove the BLKDEV_IFL_BARRIER flag
Remove support for barriers on discards, which is unused now.  Also
remove the DISCARD_NOBARRIER I/O type in favour of just setting the
rw flags up locally in blkdev_issue_discard.

tj: Also remove DISCARD_SECURE and use REQ_SECURE directly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:35:40 +02:00
Tejun Heo 3a2edd0d6d block: make __blk_rq_prep_clone() copy most command flags
Currently __blk_rq_prep_clone() copies only REQ_WRITE and REQ_DISCARD.
There's no reason to omit other command flags and REQ_FUA needs to be
copied to implement FUA support in request-based dm.

REQ_COMMON_MASK which specifies flags to be copied from bio to request
already identifies all the command flags.  Define REQ_CLONE_MASK to be
the same as REQ_COMMON_MASK for clarity and make __blk_rq_prep_clone()
copy all flags in the mask.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:35:38 +02:00
Tejun Heo d391a2dda2 block: use REQ_FLUSH in blkdev_issue_flush()
Update blkdev_issue_flush() to use new REQ_FLUSH interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:35:37 +02:00
Tejun Heo 09d60c701b block: make sure FSEQ_DATA request has the same rq_disk as the original
rq->rq_disk and bio->bi_bdev->bd_disk may differ if a request has
passed through remapping drivers.  FSEQ_DATA request incorrectly
followed bio->bi_bdev->bd_disk ending up being issued w/ mismatching
rq_disk.  Make it follow orig_rq->rq_disk.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Tested-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:35:37 +02:00
Tejun Heo 47f70d5a6c block: kick queue after sequencing REQ_FLUSH/FUA
While completing a request from a REQ_FLUSH/FUA sequence, another
request can be pushed to the request queue.  If a driver tests
elv_queue_empty() before completing a request and runs the queue again
only if the queue wasn't empty, this may lead to hang.  Please note
that most drivers either kick the queue unconditionally or test queue
emptiness after completing the current request and don't have this
problem.

This patch removes this possibility by making REQ_FLUSH/FUA sequence
code kick the queue if the queue was empty before completing a request
from REQ_FLUSH/FUA sequence.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:35:37 +02:00
Tejun Heo 337238be1b block: initialize flush request with WRITE_FLUSH instead of REQ_FLUSH
init_flush_request() only set REQ_FLUSH when initializing flush
requests making them READ requests.  Use WRITE_FLUSH instead.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:35:37 +02:00
Christoph Hellwig cde4c406d8 block: simplify queue_next_fseq
We need to call blk_rq_init and elv_insert for all cases in queue_next_fseq,
so take these calls into common code.  Also move the end_io initialization
from queue_flush into queue_next_fseq and rename queue_flush to
init_flush_request now that it's old name doesn't apply anymore.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:35:37 +02:00
Tejun Heo 1e87901e18 block: filter flush bio's in __generic_make_request()
There are a number of make_request based drivers which don't support
cache flushes.  Filter out flush bio's in __generic_make_request() so
that they don't have to worry about them.  All FLUSH/FUA requests with
data are converted to regular IO requests and empty ones are completed
immediately.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:35:37 +02:00
Tejun Heo 4fed947cb3 block: implement REQ_FLUSH/FUA based interface for FLUSH/FUA requests
Now that the backend conversion is complete, export sequenced
FLUSH/FUA capability through REQ_FLUSH/FUA flags.  REQ_FLUSH means the
device cache should be flushed before executing the request.  REQ_FUA
means that the data in the request should be on non-volatile media on
completion.

Block layer will choose the correct way of implementing the semantics
and execute it.  The request may be passed to the device directly if
the device can handle it; otherwise, it will be sequenced using one or
more proxy requests.  Devices will never see REQ_FLUSH and/or FUA
which it doesn't support.

Also, unlike the original REQ_HARDBARRIER, REQ_FLUSH/FUA requests are
never failed with -EOPNOTSUPP.  If the underlying device doesn't
support FLUSH/FUA, the block layer simply make those noop.  IOW, it no
longer distinguishes between writeback cache which doesn't support
cache flush and writethrough/no cache.  Devices which have WB cache
w/o flush are very difficult to come by these days and there's nothing
much we can do anyway, so it doesn't make sense to require everyone to
implement -EOPNOTSUPP handling.  This will simplify filesystems and
block drivers as they can drop -EOPNOTSUPP retry logic for barriers.

* QUEUE_ORDERED_* are removed and QUEUE_FSEQ_* are moved into
  blk-flush.c.

* REQ_FLUSH w/o data can also be directly passed to drivers without
  sequencing but some drivers assume that zero length requests don't
  have rq->bio which isn't true for these requests requiring the use
  of proxy requests.

* REQ_COMMON_MASK now includes REQ_FLUSH | REQ_FUA so that they are
  copied from bio to request.

* WRITE_BARRIER is marked deprecated and WRITE_FLUSH, WRITE_FUA and
  WRITE_FLUSH_FUA are added.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:35:37 +02:00
Tejun Heo dd4c133f38 block: rename barrier/ordered to flush
With ordering requirements dropped, barrier and ordered are misnomers.
Now all block layer does is sequencing FLUSH and FUA.  Rename them to
flush.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:35:36 +02:00
Tejun Heo 8839a0e055 block: rename blk-barrier.c to blk-flush.c
Without ordering requirements, barrier and ordering are minomers.
Rename block/blk-barrier.c to block/blk-flush.c.  Rename of symbols
will follow.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:35:36 +02:00
Tejun Heo 28e7d18452 block: drop barrier ordering by queue draining
Filesystems will take all the responsibilities for ordering requests
around commit writes and will only indicate how the commit writes
themselves should be handled by block layers.  This patch drops
barrier ordering by queue draining from block layer.  Ordering by
draining implementation was somewhat invasive to request handling.
List of notable changes follow.

* Each queue has 1 bit color which is flipped on each barrier issue.
  This is used to track whether a given request is issued before the
  current barrier or not.  REQ_ORDERED_COLOR flag and coloring
  implementation in __elv_add_request() are removed.

* Requests which shouldn't be processed yet for draining were stalled
  by returning -EAGAIN from blk_do_ordered() according to the test
  result between blk_ordered_req_seq() and blk_blk_ordered_cur_seq().
  This logic is removed.

* Draining completion logic in elv_completed_request() removed.

* All barrier sequence requests were queued to request queue and then
  trckled to lower layer according to progress and thus maintaining
  request orders during requeue was necessary.  This is replaced by
  queueing the next request in the barrier sequence only after the
  current one is complete from blk_ordered_complete_seq(), which
  removes the need for multiple proxy requests in struct request_queue
  and the request sorting logic in the ELEVATOR_INSERT_REQUEUE path of
  elv_insert().

* As barriers no longer have ordering constraints, there's no need to
  dump the whole elevator onto the dispatch queue on each barrier.
  Insert barriers at the front instead.

* If other barrier requests come to the front of the dispatch queue
  while one is already in progress, they are stored in
  q->pending_barriers and restored to dispatch queue one-by-one after
  each barrier completion from blk_ordered_complete_seq().

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:35:36 +02:00
Tejun Heo dd831006d5 block: misc cleanups in barrier code
Make the following cleanups in preparation of barrier/flush update.

* blk_do_ordered() declaration is moved from include/linux/blkdev.h to
  block/blk.h.

* blk_do_ordered() now returns pointer to struct request, with %NULL
  meaning "try the next request" and ERR_PTR(-EAGAIN) "try again
  later".  The third case will be dropped with further changes.

* In the initialization of proxy barrier request, data direction is
  already set by init_request_from_bio().  Drop unnecessary explicit
  REQ_WRITE setting and move init_request_from_bio() above REQ_FUA
  flag setting.

* add_request() is collapsed into __make_request().

These changes don't make any functional difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:35:36 +02:00
Tejun Heo 4913efe456 block: deprecate barrier and replace blk_queue_ordered() with blk_queue_flush()
Barrier is deemed too heavy and will soon be replaced by FLUSH/FUA
requests.  Deprecate barrier.  All REQ_HARDBARRIERs are failed with
-EOPNOTSUPP and blk_queue_ordered() is replaced with simpler
blk_queue_flush().

blk_queue_flush() takes combinations of REQ_FLUSH and FUA.  If a
device has write cache and can flush it, it should set REQ_FLUSH.  If
the device can handle FUA writes, it should also set REQ_FUA.

All blk_queue_ordered() users are converted.

* ORDERED_DRAIN is mapped to 0 which is the default value.
* ORDERED_DRAIN_FLUSH is mapped to REQ_FLUSH.
* ORDERED_DRAIN_FLUSH_FUA is mapped to REQ_FLUSH | REQ_FUA.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Boaz Harrosh <bharrosh@panasas.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Alasdair G Kergon <agk@redhat.com>
Cc: Pierre Ossman <drzeus@drzeus.cx>
Cc: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:35:36 +02:00
Tejun Heo 6958f14545 block: kill QUEUE_ORDERED_BY_TAG
Nobody is making meaningful use of ORDERED_BY_TAG now and queue
draining for barrier requests will be removed soon which will render
the advantage of tag ordering moot.  Kill ORDERED_BY_TAG.  The
following users are affected.

* brd: converted to ORDERED_DRAIN.
* virtio_blk: ORDERED_TAG path was already marked deprecated.  Removed.
* xen-blkfront: ORDERED_TAG case dropped.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:35:36 +02:00
Brian King be14eb6191 block: Range check cpu in blk_cpu_to_group
While testing CPU DLPAR, the following problem was discovered.
We were DLPAR removing the first CPU, which in this case was
logical CPUs 0-3. CPUs 0-2 were already marked offline and
we were in the process of offlining CPU 3. After marking
the CPU inactive and offline in cpu_disable, but before the
cpu was completely idle (cpu_die), we ended up in __make_request
on CPU 3. There we looked at the topology map to see which CPU
to complete the I/O on and found no CPUs in the cpu_sibling_map.
This resulted in the block layer setting the completion cpu
to be NR_CPUS, which then caused an oops when we tried to
complete the I/O.

Fix this by sanity checking the value we return from blk_cpu_to_group
to be a valid cpu value.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 09:03:21 +02:00
Jens Axboe 5dd531a03a block: add function call to switch the IO scheduler from a driver
Currently drivers must do an elevator_exit() + elevator_init()
to switch IO schedulers. There are a few problems with this:

- Since commit 1abec4fdbb,
  elevator_init() requires a zeroed out q->elevator
  pointer. The two existing in-kernel users don't do that.

- It will only work at initialization time, since using the
  above two-staged construct does not properly quisce the queue.

So add elevator_change() which takes care of this, and convert
the elv_iosched_store() sysfs interface to use this helper as well.

Reported-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Reported-by: Kevin Vigor <kevin@vigor.nu>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-23 13:52:19 +02:00
Jiri Slaby 5e00d1b5b4 BLOCK: fix bio.bi_rw handling
Return of the bi_rw tests is no longer bool after commit 74450be1. But
results of such tests are stored in bools. This doesn't fit in there
for some compilers (gcc 4.5 here), so either use !! magic to get real
bools or use ulong where the result is assigned somewhere.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-23 12:33:10 +02:00
Xiaotian Feng c87ffbb812 block: put dev->kobj in blk_register_queue fail path
kernel needs to kobject_put on dev->kobj if elv_register_queue fails.

Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Nikanth Karthikesan <knikanth@suse.de>
Cc: David Teigland <teigland@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-23 12:30:29 +02:00
Vivek Goyal c4e7893ebc cfq-iosched: blktrace print per slice sector stats
o Divyesh had gotten rid of this code in the past. I want to re-introduce it
  back as it helps me a lot during debugging.

Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Divyesh Shah <dpshah@google.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-23 12:25:03 +02:00
Vivek Goyal 80bdf0c78f cfq-iosched: Implement tunable group_idle
o Implement a new tunable group_idle, which allows idling on the group
  instead of a cfq queue. Hence one can set slice_idle = 0 and not idle
  on the individual queues but idle on the group. This way on fast storage
  we can get fairness between groups at the same time overall throughput
  improves.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-23 12:24:26 +02:00
Vivek Goyal 02b35081fc cfq-iosched: Do group share accounting in IOPS when slice_idle=0
o Implement another CFQ mode where we charge group in terms of number
  of requests dispatched instead of measuring the time. Measuring in terms
  of time is not possible when we are driving deeper queue depths and there
  are requests from multiple cfq queues in the request queue.

o This mode currently gets activated if one sets slice_idle=0 and associated
  disk supports NCQ. Again the idea is that on an NCQ disk with idling disabled
  most of the queues will dispatch 1 or more requests and then cfq queue
  expiry happens and we don't have a way to measure time. So start providing
  fairness in terms of IOPS.

o Currently IOPS mode works only with cfq group scheduling. CFQ is following
  different scheduling algorithms for queue and group scheduling. These IOPS
  stats are used only for group scheduling hence in non-croup mode nothing
  should change.

o For CFQ group scheduling one can disable slice idling so that we don't idle
  on queue and drive deeper request queue depths (achieving better throughput),
  at the same time group idle is enabled so one should get service
  differentiation among groups.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-23 12:23:53 +02:00
Vivek Goyal b6508c1618 cfq-iosched: Do not idle if slice_idle=0
Do not idle either on cfq queue or service tree if slice_idle=0. User does
not want any queue or service tree idling. Currently even if slice_idle=0,
we were waiting for request to finish before expiring the queue and that
can lead to lower queue depths.

Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-23 12:23:33 +02:00
Ciju Rajan K 96aa1b419d blkio: Fix return code for mkdir calls
If the cgroup hierarchy for blkio control groups is deeper than two
levels, kernel should not allow the creation of further levels. mkdir
system call does not except EINVAL as a return value. This patch
replaces EINVAL with more appropriate EPERM

Signed-off-by: Ciju Rajan K <ciju@linux.vnet.ibm.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-23 10:56:30 +02:00
Adrian Hunter 8d57a98ccd block: add secure discard
Secure discard is the same as discard except that all copies of the
discarded sectors (perhaps created by garbage collection) must also be
erased.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Madhusudhan Chikkature <madhu.cr@ti.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ben Gardiner <bengardiner@nanometrics.ca>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12 08:43:30 -07:00
Jiri Kosina 6396fc3b3f Merge branch 'master' into for-next
Conflicts:
	fs/exofs/inode.c
2010-08-11 09:36:51 +02:00
Stefan Weil eef35c2d41 Fix spelling fuction -> function in comments
To avoid more patches, I also fixed other spelling
and grammar bugs when they were in the same or
following line:

successfull -> successful
parse -> parses
controler -> controller
controlers -> controllers

Cc: Jiri Kosina <trivial@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-09 11:22:49 +02:00
Dmitry Monakhov 18edc8eaa6 blkdev: fix blkdev_issue_zeroout return value
- If function called without barrier option retvalue is incorrect

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-08 12:31:08 -04:00
ike Snitzer 3383977fad block: update request stacking methods to support discards
Propagate REQ_DISCARD in cmd_flags when cloning a discard request.
Skip blk_rq_check_limits's existing checks for discard requests because
discard limits will have already been checked in blkdev_issue_discard.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-08 12:11:33 -04:00
FUJITA Tomonori 16f2319fd6 block: set up rq->rq_disk properly for flush requests
q->bar_rq.rq_disk is NULL. Use the rq_disk of the original request
instead.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:52:41 +02:00
FUJITA Tomonori 28e18d0188 block: set REQ_TYPE_FS on flush requests
the block layer doesn't set rq->cmd_type on flush requests. By
definition, it should be REQ_TYPE_FS (the lower layers build a command
and interpret the result of it, that is, the block layer doesn't know
the details).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:52:40 +02:00
Jens Axboe 10d1f9e2cc block: fix problem with sending down discard that isn't of correct granularity
If the queue doesn't have a limit set, or it just set UINT_MAX like
we default to, we coud be sending down a discard request that isn't
of the correct granularity if the block size is > 512b.

Fix this by adjusting max_discard_sectors down to the proper
alignment.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:26:33 +02:00
Dave Chinner f10d9f617a blkdev: check for valid request queue before issuing flush
Issuing a blkdev_issue_flush() on an unconfigured loop device causes a panic as
q->make_request_fn is not configured. This can occur when trying to mount the
unconfigured loop device as an XFS filesystem. There are no guards that catch
the bio before the request function is called because we don't add a payload to
the bio. Instead, manually check this case as soon as we have a pointer to the
queue to flush.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:26:29 +02:00
Arnd Bergmann 15392efb9d block: remove BKL from partition ioctls
The blkpg_ioctl and blkdev_reread_part access fields of
the bdev and gendisk structures, yet they always do so
under the protection of bdev->bd_mutex, which seems
sufficient.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
cked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:26:08 +02:00
Arnd Bergmann 6de4370310 block: remove BKL from BLKROSET and BLKFLSBUF
We only call the functions set_device_ro(),
invalidate_bdev(), sync_filesystem() and sync_blockdev()
while holding the BKL in these commands. All
of these are also done in other code paths without
the BKL, which leads me to the conclusion that
the BKL is not needed here either.

The reason we hold it here is that it was originally
pushed down into the ioctl function from vfs_ioctl.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:26:08 +02:00
Arnd Bergmann 62c2a7d969 block: push BKL into blktrace ioctls
The blktrace driver currently needs the BKL, but
we should not need to take that in the block layer,
so just push it down into the driver itself.

It is quite likely that the BKL is not actually
required in blktrace code and could be removed
in a follow-on patch.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:26:08 +02:00
Arnd Bergmann 8a6cfeb6de block: push down BKL into .locked_ioctl
As a preparation for the removal of the big kernel
lock in the block layer, this removes the BKL
from the common ioctl handling code, moving it
into every single driver still using it.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:25:00 +02:00
FUJITA Tomonori 00fff26539 block: remove q->prepare_flush_fn completely
This removes q->prepare_flush_fn completely (changes the
blk_queue_ordered API).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:24:15 +02:00
FUJITA Tomonori b6a903151d block: permit PREFLUSH and POSTFLUSH without prepare_flush_fn
This is preparation for removing q->prepare_flush_fn.

Temporarily, blk_queue_ordered() permits QUEUE_ORDERED_DO_PREFLUSH and
QUEUE_ORDERED_DO_POSTFLUSH without prepare_flush_fn.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:23:56 +02:00
FUJITA Tomonori 8749534fe6 block: introduce REQ_FLUSH flag
SCSI-ml needs a way to mark a request as flush request in
q->prepare_flush_fn because it needs to identify them later (e.g. in
q->request_fn or prep_rq_fn).

queue_flush sets REQ_HARDBARRIER in rq->cmd_flags however the block
layer also sends normal REQ_TYPE_FS requests with REQ_HARDBARRIER. So
SCSI-ml can't use REQ_HARDBARRIER to identify flush requests.

We could change the block layer to clear REQ_HARDBARRIER bit before
sending non flush requests to the lower layers. However, intorudcing
the new flag looks cleaner (surely easier).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James Bottomley <James.Bottomley@suse.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Alasdair G Kergon <agk@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:23:53 +02:00
James Bottomley 28018c242a block: implement an unprep function corresponding directly to prep
Reviewed-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:23:47 +02:00
Jens Axboe 3ffb52e73b block: fixup missing conversion from BIO_RW_DISCARD to REQ_DISCARD
Didn't cause a merge conflict, so fixed this one up manually
post merge.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:23:41 +02:00
Andi Kleen 2c8919dee6 gcc-4.6: block: fix unused but set variables in blk-merge
Just some dead code.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:23:10 +02:00
Christoph Hellwig 66ac028019 block: don't allocate a payload for discard request
Allocating a fixed payload for discard requests always was a horrible hack,
and it's not coming to byte us when adding support for discard in DM/MD.

So change the code to leave the allocation of a payload to the lowlevel
driver.  Unfortunately that means we'll need another hack, which allows
us to update the various block layer length fields indicating that we
have a payload.  Instead of hiding this in sd.c, which we already partially
do for UNMAP support add a documented helper in the core block layer for it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:23:08 +02:00
Christoph Hellwig 7b6d91daee block: unify flags for struct bio and struct request
Remove the current bio flags and reuse the request flags for the bio, too.
This allows to more easily trace the type of I/O from the filesystem
down to the block driver.  There were two flags in the bio that were
missing in the requests:  BIO_RW_UNPLUG and BIO_RW_AHEAD.  Also I've
renamed two request flags that had a superflous RW in them.

Note that the flags are in bio.h despite having the REQ_ name - as
blkdev.h includes bio.h that is the only way to go for now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:20:39 +02:00
Christoph Hellwig 33659ebbae block: remove wrappers for request type/flags
Remove all the trivial wrappers for the cmd_type and cmd_flags fields in
struct requests.  This allows much easier grepping for different request
types instead of unwinding through macros.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:17:56 +02:00
Jens Axboe 956bcb7c1a block: add helpers for the trivial queue flag sysfs show/store entries
The code for nonrot, random, and io stats are completely identical.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:13:50 +02:00
Jens Axboe e2e1a148bc block: add sysfs knob for turning off disk entropy contributions
There are two reasons for doing this:

- On SSD disks, the completion times aren't as random as they
  are for rotational drives. So it's questionable whether they
  should contribute to the random pool in the first place.

- Calling add_disk_randomness() has a lot of overhead.

This adds /sys/block/<dev>/queue/add_random that will allow you to
switch off on a per-device basis. The default setting is on, so there
should be no functional changes from this patch.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:13:00 +02:00
Tao Ma 1b99973f1c block: Don't count_vm_events for discard bio in submit_bio.
In submit_bio, we count vm events by check READ/WRITE.
But actually DISCARD_NOBARRIER also has the WRITE flag set.
It looks as if in blkdev_issue_discard, we also add a
page as the payload and the bio_has_data check isn't enough.
So add another check for discard bio.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-24 08:14:22 +02:00
Jens Axboe 9e495db1a1 cfq: fix recursive call in cfq_blkiocg_update_completion_stats()
e98ef89b has a typo, causing cfq_blkiocg_update_completion_stats()
to call itself instead of blkiocg_update_completion_stats().

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-21 09:10:55 +02:00
Vivek Goyal e98ef89b30 cfq-iosched: Fixed boot warning with BLK_CGROUP=y and CFQ_GROUP_IOSCHED=n
Hi Jens,

Few days back Ingo noticed a CFQ boot time warning. This patch fixes it.
The issue here is that with CFQ_GROUP_IOSCHED=n, CFQ should not really
be making blkio stat related calls.

> Hm, it's still not entirely fixed, as of 2.6.35-rc2-00131-g7908a9e. With
> some
> configs i get bad spinlock warnings during bootup:
>
> [   28.968013] initcall net_olddevs_init+0x0/0x82 returned 0 after 93750
> usecs
> [   28.972003] calling  b44_init+0x0/0x55 @ 1
> [   28.976009] bus: 'pci': add driver b44
> [   28.976374]  sda:
> [   28.978157] BUG: spinlock bad magic on CPU#1, async/0/117
> [   28.980000]  lock: 7e1c5bbc, .magic: 00000000, .owner: <none>/-1, +.owner_cpu: 0
> [   28.980000] Pid: 117, comm: async/0 Not tainted +2.6.35-rc2-tip-01092-g010e7ef-dirty #8183
> [   28.980000] Call Trace:
> [   28.980000]  [<41ba6d55>] ? printk+0x20/0x24
> [   28.980000]  [<4134b7b7>] spin_bug+0x7c/0x87
> [   28.980000]  [<4134b853>] do_raw_spin_lock+0x1e/0x123
> [   28.980000]  [<41ba92ca>] ? _raw_spin_lock_irqsave+0x12/0x20
> [   28.980000]  [<41ba92d2>] _raw_spin_lock_irqsave+0x1a/0x20
> [   28.980000]  [<4133476f>] blkiocg_update_io_add_stats+0x25/0xfb
> [   28.980000]  [<41335dae>] ? cfq_prio_tree_add+0xb1/0xc1
> [   28.980000]  [<41337bc7>] cfq_insert_request+0x8c/0x425

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-18 19:57:47 +02:00
Jeff Moyer c10b61f091 cfq: Don't allow queue merges for queues that have no process references
Hi,

A user reported a kernel bug when running a particular program that did
the following:

created 32 threads
- each thread took a mutex, grabbed a global offset, added a buffer size
  to that offset, released the lock
- read from the given offset in the file
- created a new thread to do the same
- exited

The result is that cfq's close cooperator logic would trigger, as the
threads were issuing I/O within the mean seek distance of one another.
This workload managed to routinely trigger a use after free bug when
walking the list of merge candidates for a particular cfqq
(cfqq->new_cfqq).  The logic used for merging queues looks like this:

static void cfq_setup_merge(struct cfq_queue *cfqq, struct cfq_queue *new_cfqq)
{
	int process_refs, new_process_refs;
	struct cfq_queue *__cfqq;

	/* Avoid a circular list and skip interim queue merges */
	while ((__cfqq = new_cfqq->new_cfqq)) {
		if (__cfqq == cfqq)
			return;
		new_cfqq = __cfqq;
	}

	process_refs = cfqq_process_refs(cfqq);
	/*
	 * If the process for the cfqq has gone away, there is no
	 * sense in merging the queues.
	 */
	if (process_refs == 0)
		return;

	/*
	 * Merge in the direction of the lesser amount of work.
	 */
	new_process_refs = cfqq_process_refs(new_cfqq);
	if (new_process_refs >= process_refs) {
		cfqq->new_cfqq = new_cfqq;
		atomic_add(process_refs, &new_cfqq->ref);
	} else {
		new_cfqq->new_cfqq = cfqq;
		atomic_add(new_process_refs, &cfqq->ref);
	}
}

When a merge candidate is found, we add the process references for the
queue with less references to the queue with more.  The actual merging
of queues happens when a new request is issued for a given cfqq.  In the
case of the test program, it only does a single pread call to read in
1MB, so the actual merge never happens.

Normally, this is fine, as when the queue exits, we simply drop the
references we took on the other cfqqs in the merge chain:

	/*
	 * If this queue was scheduled to merge with another queue, be
	 * sure to drop the reference taken on that queue (and others in
	 * the merge chain).  See cfq_setup_merge and cfq_merge_cfqqs.
	 */
	__cfqq = cfqq->new_cfqq;
	while (__cfqq) {
		if (__cfqq == cfqq) {
			WARN(1, "cfqq->new_cfqq loop detected\n");
			break;
		}
		next = __cfqq->new_cfqq;
		cfq_put_queue(__cfqq);
		__cfqq = next;
	}

However, there is a hole in this logic.  Consider the following (and
keep in mind that each I/O keeps a reference to the cfqq):

q1->new_cfqq = q2   // q2 now has 2 process references
q3->new_cfqq = q2   // q2 now has 3 process references

// the process associated with q2 exits
// q2 now has 2 process references

// queue 1 exits, drops its reference on q2
// q2 now has 1 process reference

// q3 exits, so has 0 process references, and hence drops its references
// to q2, which leaves q2 also with 0 process references

q4 comes along and wants to merge with q3

q3->new_cfqq still points at q2!  We follow that link and end up at an
already freed cfqq.

So, the fix is to not follow a merge chain if the top-most queue does
not have a process reference, otherwise any queue in the chain could be
already freed.  I also changed the logic to disallow merging with a
queue that does not have any process references.  Previously, we did
this check for one of the merge candidates, but not the other.  That
doesn't really make sense.

Without the attached patch, my system would BUG within a couple of
seconds of running the reproducer program.  With the patch applied, my
system ran the program for over an hour without issues.

This addresses the following bugzilla:
    https://bugzilla.kernel.org/show_bug.cgi?id=16217

Thanks a ton to Phil Carns for providing the bug report and an excellent
reproducer.

[ Note for stable: this applies to 2.6.32/33/34 ].

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Reported-by: Phil Carns <carns@mcs.anl.gov>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-17 20:17:35 +02:00
Christoph Hellwig fbbf055692 block: fix DISCARD_BARRIER requests
Filesystems assume that DISCARD_BARRIER are full barriers, so that they
don't have to track in-progress discard operation when submitting new I/O.
But currently we only treat them as elevator barriers, which don't
actually do the nessecary queue drains.

Also remove the unlikely around both the DISCARD and BARRIER requests -
the happen far too often for a static mispredict.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-17 10:10:53 +02:00
Mike Snitzer 1abec4fdbb block: make blk_init_free_list and elevator_init idempotent
blk_init_allocated_queue_node may fail and the caller _could_ retry.
Accommodate the unlikely event that blk_init_allocated_queue_node is
called on an already initialized (possibly partially) request_queue.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-04 13:47:06 +02:00
Mike Snitzer c86d1b8ae6 block: avoid unconditionally freeing previously allocated request_queue
On blk_init_allocated_queue_node failure, only free the request_queue if
it is wasn't previously allocated outside the block layer
(e.g. blk_init_queue_node was blk_init_allocated_queue_node caller).

This addresses an interface bug introduced by the following commit:
01effb0 block: allow initialization of previously allocated
request_queue

Otherwise the request_queue may be free'd out from underneath a caller
that is managing the request_queue directly (e.g. caller uses
blk_alloc_queue + blk_init_allocated_queue_node).

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-04 13:47:06 +02:00
Shaohua Li d02a2c077f cfq-iosched: fix an oops caused by slab leak
I got below oops when unloading cfq-iosched. Considering scenario:
queue A merge to B, C merge to D and B will be merged to D. Before B is merged
to D, we do split B. We should put B's reference for D.

[  807.768536] =============================================================================
[  807.768539] BUG cfq_queue: Objects remaining on kmem_cache_close()
[  807.768541] -----------------------------------------------------------------------------
[  807.768543]
[  807.768546] INFO: Slab 0xffffea0003e6b4e0 objects=26 used=1 fp=0xffff88011d584fd8 flags=0x200000000004082
[  807.768550] Pid: 5946, comm: rmmod Tainted: G        W   2.6.34-07097-gf4b87de-dirty #724
[  807.768552] Call Trace:
[  807.768560]  [<ffffffff81104e8d>] slab_err+0x8f/0x9d
[  807.768564]  [<ffffffff811059e1>] ? flush_cpu_slab+0x0/0x93
[  807.768569]  [<ffffffff8164be52>] ? add_preempt_count+0xe/0xca
[  807.768572]  [<ffffffff8164bd9c>] ? sub_preempt_count+0xe/0xb6
[  807.768577]  [<ffffffff81648871>] ? _raw_spin_unlock+0x15/0x30
[  807.768580]  [<ffffffff8164bd9c>] ? sub_preempt_count+0xe/0xb6
[  807.768584]  [<ffffffff811061bc>] list_slab_objects+0x9b/0x19f
[  807.768588]  [<ffffffff8164bf0a>] ? add_preempt_count+0xc6/0xca
[  807.768591]  [<ffffffff81109e27>] kmem_cache_destroy+0x13f/0x21d
[  807.768597]  [<ffffffffa000ff13>] cfq_slab_kill+0x1a/0x43 [cfq_iosched]
[  807.768601]  [<ffffffffa000ffcf>] cfq_exit+0x93/0x9e [cfq_iosched]
[  807.768606]  [<ffffffff810973a2>] sys_delete_module+0x1b1/0x219
[  807.768612]  [<ffffffff8102fb5b>] system_call_fastpath+0x16/0x1b
[  807.768618] INFO: Object 0xffff88011d584618 @offset=1560
[  807.768622] INFO: Allocated in cfq_get_queue+0x11e/0x274 [cfq_iosched] age=7173 cpu=1 pid=5496
[  807.768626] =============================================================================

Cc: stable@kernel.org
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-25 10:17:26 +02:00
Mike Snitzer e36f724b4a block: Adjust elv_iosched_show to return "none" for bio-based DM
Bio-based DM doesn't use an elevator (queue is !blk_queue_stackable()).

Longer-term DM will not allocate an elevator for bio-based DM.  But even
then there will be small potential for an elevator to be allocated for
a request-based DM table only to have a bio-based table be loaded in the
end.

Displaying "none" for bio-based DM will help avoid user confusion.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-24 09:07:32 +02:00
Konstantin Khlebnikov 80b15c7389 cfq-iosched: compact io_context radix_tree
Use small consequent indexes as radix tree keys instead of sparse cfqd address.

This change will reduce radix tree depth from 11 (6 for 32-bit hosts)
to 1 if host have <=64 disks under cfq control, or to 0 if there only one disk.
So, this patch save 10*560 bytes for each process (5*296 for 32-bit hosts)

For each cfqd allocate cic index from ida.
To unlink dead cic from tree without cfqd access store index into ->key.
(bit 0 -- dead mark, bits 1..30 -- index: ida produce id in range 0..2^31-1)

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-24 09:06:59 +02:00
Konstantin Khlebnikov bca4b914b5 cfq-iosched: remove dead_key from cfq_io_context
Remove ->dead_key field from cfq_io_context to shrink its size to 128 bytes.
(64 bytes for 32-bit hosts)

Use lower bit in ->key as dead-mark, instead of moving key to separate field.
After this for dead cfq_io_context we got cic->key != cfqd automatically.
Thus, io_context's last-hit cache should work without changing.

Now to check ->key for non-dead state compare it with cfqd,
instead of checking ->key for non-null value as it was before.

Plus remove obsolete race protection in cfq_cic_lookup.
This race gone after v2.6.24-1728-g4ac845a

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-24 09:06:59 +02:00
Jens Axboe ee9a3607fb Merge branch 'master' into for-2.6.35
Conflicts:
	fs/ext3/fsync.c

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-21 21:27:26 +02:00
Paul E. McKenney f1ac2502e1 block: remove all rcu head initializations
Remove all rcu head inits. We don't care about the RCU head state before passing
it to call_rcu() anyway. Only leave the "on_stack" variants so debugobjects can
keep track of objects on stack.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-21 20:01:02 +02:00
Mike Snitzer 01effb0dc1 block: allow initialization of previously allocated request_queue
blk_init_queue() allocates the request_queue structure and then
initializes it as needed (request_fn, elevator, etc).

Split initialization out to blk_init_allocated_queue_node.
Introduce blk_init_allocated_queue wrapper function to model existing
blk_init_queue and blk_init_queue_node interfaces.

Export elv_register_queue to allow a newly added elevator to be
registered with sysfs.  Export elv_unregister_queue for symmetry.

These changes allow DM to initialize a device's request_queue with more
precision.  In particular, DM no longer unconditionally initializes a
full request_queue (elevator et al).  It only does so for a
request-based DM device.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-11 08:57:42 +02:00
Li Zefan 0341509fdf blk-cgroup: Fix an RCU warning in blkiocg_create()
with CONFIG_PROVE_RCU=y, a warning can be triggered:

  # mount -t cgroup -o blkio xxx /mnt
  # mkdir /mnt/subgroup

...
kernel/cgroup.c:4442 invoked rcu_dereference_check() without protection!
...

To fix this, we avoid caling css_depth() here, which is a bit simpler
than the original code.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-07 08:57:00 +02:00
Vivek Goyal dcf097b247 blk-cgroup: Fix RCU correctness warning in cfq_init_queue()
It is necessary to be in an RCU read-side critical section when invoking
css_id(), so this patch adds one to blkiocg_add_blkio_group().  This is
actually a false positive, because this is called at initialization time
and hence always refers to the root cgroup, which cannot go away.

[  103.790505] ===================================================
[  103.790509] [ INFO: suspicious rcu_dereference_check() usage. ]
[  103.790511] ---------------------------------------------------
[  103.790514] kernel/cgroup.c:4432 invoked rcu_dereference_check() without protection!
[  103.790517]
[  103.790517] other info that might help us debug this:
[  103.790519]
[  103.790521]
[  103.790521] rcu_scheduler_active = 1, debug_locks = 1
[  103.790524] 4 locks held by bash/4422:
[  103.790526]  #0:  (&buffer->mutex){+.+.+.}, at: [<ffffffff8114befa>] sysfs_write_file+0x3c/0x144
[  103.790537]  #1:  (s_active#102){.+.+.+}, at: [<ffffffff8114bfa5>] sysfs_write_file+0xe7/0x144
[  103.790544]  #2:  (&q->sysfs_lock){+.+.+.}, at: [<ffffffff812263b1>] queue_attr_store+0x49/0x8f
[  103.790552]  #3:  (&(&blkcg->lock)->rlock){......}, at: [<ffffffff8122e4db>] blkiocg_add_blkio_group+0x2b/0xad
[  103.790560]
[  103.790561] stack backtrace:
[  103.790564] Pid: 4422, comm: bash Not tainted 2.6.34-rc4-blkio-second-crash #81
[  103.790567] Call Trace:
[  103.790572]  [<ffffffff81068f57>] lockdep_rcu_dereference+0x9d/0xa5
[  103.790577]  [<ffffffff8107fac1>] css_id+0x44/0x57
[  103.790581]  [<ffffffff8122e503>] blkiocg_add_blkio_group+0x53/0xad
[  103.790586]  [<ffffffff81231936>] cfq_init_queue+0x139/0x32c
[  103.790591]  [<ffffffff8121f2d0>] elv_iosched_store+0xbf/0x1bf
[  103.790595]  [<ffffffff812263d8>] queue_attr_store+0x70/0x8f
[  103.790599]  [<ffffffff8114bfa5>] ? sysfs_write_file+0xe7/0x144
[  103.790603]  [<ffffffff8114bfc6>] sysfs_write_file+0x108/0x144
[  103.790609]  [<ffffffff810f527f>] vfs_write+0xae/0x10b
[  103.790612]  [<ffffffff81069863>] ? trace_hardirqs_on_caller+0x10c/0x130
[  103.790616]  [<ffffffff810f539c>] sys_write+0x4a/0x6e
[  103.790622]  [<ffffffff81002b5b>] system_call_fastpath+0x16/0x1b
[  103.790625]

Located-by: Miles Lane <miles.lane@gmail.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-06 08:54:00 +02:00
Jens Axboe 0f3942a39e block: kill some useless goto's in blk-cgroup.c
goto has its place, but lets cut back on some of the more
frivolous uses of it.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-03 14:28:55 +02:00
Jens Axboe 0341aafb7f block: fix bad use of min() on different types
Just cast the page size to sector_t, that will always fit.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-29 09:28:21 +02:00
Dmitry Monakhov 50eaeb323a cfq-iosched: fix broken cfq_ref_get_cfqf() for CONFIG_BLK_CGROUP=y && CFQ_GROUP_IOSCHED=n
We should return the cfq_group for this case, not NULL.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-28 19:51:38 +02:00
Dmitry Monakhov 3f14d792f9 blkdev: add blkdev_issue_zeroout helper function
- Add bio_batch helper primitive. This is rather generic primitive
  for submitting/waiting a complex request which consists of several
  bios.
- blkdev_issue_zeroout() generate number of zero filed write bios.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-28 19:47:36 +02:00
Dmitry Monakhov f31e7e4022 blkdev: move blkdev_issue helper functions to separate file
Move blkdev_issue_discard from blk-barrier.c because it is
not barrier related.
Later the file will be populated by other helpers.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-28 19:47:36 +02:00
Dmitry Monakhov f17e232e92 blkdev: allow async blkdev_issue_flush requests
In some places caller don't want to wait a request to complete.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-28 19:47:36 +02:00
Dmitry Monakhov fbd9b09a17 blkdev: generalize flags for blkdev_issue_fn functions
The patch just convert all blkdev_issue_xxx function to common
set of flags. Wait/allocation semantics preserved.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-28 19:47:36 +02:00
Vivek Goyal afc24d49c1 blk-cgroup: config options re-arrangement
This patch fixes few usability and configurability issues.

o All the cgroup based controller options are configurable from
  "Genral Setup/Control Group Support/" menu. blkio is the only exception.
  Hence make this option visible in above menu and make it configurable from
  there to bring it inline with rest of the cgroup based controllers.

o Get rid of CONFIG_DEBUG_CFQ_IOSCHED.

  This option currently does two things.

  - Enable printing of cgroup paths in blktrace
  - Enables CONFIG_DEBUG_BLK_CGROUP, which in turn displays additional stat
    files in cgroup.

  If we are using group scheduling, blktrace data is of not really much use
  if cgroup information is not present. To get this data, currently one has to
  also enable CONFIG_DEBUG_CFQ_IOSCHED, which in turn brings the overhead of
  all the additional debug stat files which is not desired.

  Hence, this patch moves printing of cgroup paths under
  CONFIG_CFQ_GROUP_IOSCHED.

  This allows us to get rid of CONFIG_DEBUG_CFQ_IOSCHED completely. Now all
  the debug stat files are controlled only by CONFIG_DEBUG_BLK_CGROUP which
  can be enabled through config menu.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Divyesh Shah <dpshah@google.com>
Reviewed-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-26 19:27:56 +02:00
Vivek Goyal e5ff082e8a blkio: Fix another BUG_ON() crash due to cfqq movement across groups
o Once in a while, I was hitting a BUG_ON() in blkio code. empty_time was
  assuming that upon slice expiry, group can't be marked empty already (except
  forced dispatch).

  But this assumption is broken if cfqq can move (group_isolation=0) across
  groups after receiving a request.

  I think most likely in this case we got a request in a cfqq and accounted
  the rq in one group, later while adding the cfqq to tree, we moved the queue
  to a different group which was already marked empty and after dispatch from
  slice we found group already marked empty and raised alarm.

  This patch does not error out if group is already marked empty. This can
  introduce some empty_time stat error only in case of group_isolation=0. This
  is better than crashing. In case of group_isolation=1 we should still get
  same stats as before this patch.

[  222.308546] ------------[ cut here ]------------
[  222.309311] kernel BUG at block/blk-cgroup.c:236!
[  222.309311] invalid opcode: 0000 [#1] SMP
[  222.309311] last sysfs file: /sys/devices/virtual/block/dm-3/queue/scheduler
[  222.309311] CPU 1
[  222.309311] Modules linked in: dm_round_robin dm_multipath qla2xxx scsi_transport_fc dm_zero dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan]
[  222.309311]
[  222.309311] Pid: 4780, comm: fio Not tainted 2.6.34-rc4-blkio-config #68 0A98h/HP xw8600 Workstation
[  222.309311] RIP: 0010:[<ffffffff8121ad88>]  [<ffffffff8121ad88>] blkiocg_set_start_empty_time+0x50/0x83
[  222.309311] RSP: 0018:ffff8800ba6e79f8  EFLAGS: 00010002
[  222.309311] RAX: 0000000000000082 RBX: ffff8800a13b7990 RCX: ffff8800a13b7808
[  222.309311] RDX: 0000000000002121 RSI: 0000000000000082 RDI: ffff8800a13b7a30
[  222.309311] RBP: ffff8800ba6e7a18 R08: 0000000000000000 R09: 0000000000000001
[  222.309311] R10: 000000000002f8c8 R11: ffff8800ba6e7ad8 R12: ffff8800a13b78ff
[  222.309311] R13: ffff8800a13b7990 R14: 0000000000000001 R15: ffff8800a13b7808
[  222.309311] FS:  00007f3beec476f0(0000) GS:ffff880001e40000(0000) knlGS:0000000000000000
[  222.309311] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  222.309311] CR2: 000000000040e7f0 CR3: 00000000a12d5000 CR4: 00000000000006e0
[  222.309311] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  222.309311] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  222.309311] Process fio (pid: 4780, threadinfo ffff8800ba6e6000, task ffff8800b3d6bf00)
[  222.309311] Stack:
[  222.309311]  0000000000000001 ffff8800bab17a48 ffff8800bab17a48 ffff8800a13b7800
[  222.309311] <0> ffff8800ba6e7a68 ffffffff8121da35 ffff880000000001 00ff8800ba5c5698
[  222.309311] <0> ffff8800ba6e7a68 ffff8800a13b7800 0000000000000000 ffff8800bab17a48
[  222.309311] Call Trace:
[  222.309311]  [<ffffffff8121da35>] __cfq_slice_expired+0x2af/0x3ec
[  222.309311]  [<ffffffff8121fd7b>] cfq_dispatch_requests+0x2c8/0x8e8
[  222.309311]  [<ffffffff8120f1cd>] ? spin_unlock_irqrestore+0xe/0x10
[  222.309311]  [<ffffffff8120fb1a>] ? blk_insert_cloned_request+0x70/0x7b
[  222.309311]  [<ffffffff81210461>] blk_peek_request+0x191/0x1a7
[  222.309311]  [<ffffffffa0002799>] dm_request_fn+0x38/0x14c [dm_mod]
[  222.309311]  [<ffffffff810ae61f>] ? sync_page_killable+0x0/0x35
[  222.309311]  [<ffffffff81210fd4>] __generic_unplug_device+0x32/0x37
[  222.309311]  [<ffffffff81211274>] generic_unplug_device+0x2e/0x3c
[  222.309311]  [<ffffffffa00011a6>] dm_unplug_all+0x42/0x5b [dm_mod]
[  222.309311]  [<ffffffff8120ca37>] blk_unplug+0x29/0x2d
[  222.309311]  [<ffffffff8120ca4d>] blk_backing_dev_unplug+0x12/0x14
[  222.309311]  [<ffffffff81109a7a>] block_sync_page+0x35/0x39
[  222.309311]  [<ffffffff810ae616>] sync_page+0x41/0x4a
[  222.309311]  [<ffffffff810ae62d>] sync_page_killable+0xe/0x35
[  222.309311]  [<ffffffff8158aa59>] __wait_on_bit_lock+0x46/0x8f
[  222.309311]  [<ffffffff810ae4f5>] __lock_page_killable+0x66/0x6d
[  222.309311]  [<ffffffff81056f9c>] ? wake_bit_function+0x0/0x33
[  222.309311]  [<ffffffff810ae528>] lock_page_killable+0x2c/0x2e
[  222.309311]  [<ffffffff810afbc5>] generic_file_aio_read+0x361/0x4f0
[  222.309311]  [<ffffffff810ea044>] do_sync_read+0xcb/0x108
[  222.309311]  [<ffffffff811e42f7>] ? security_file_permission+0x16/0x18
[  222.309311]  [<ffffffff810ea6ab>] vfs_read+0xab/0x108
[  222.309311]  [<ffffffff810ea7c8>] sys_read+0x4a/0x6e
[  222.309311]  [<ffffffff81002b5b>] system_call_fastpath+0x16/0x1b
[  222.309311] Code: 58 01 00 00 00 48 89 c6 75 0a 48 83 bb 60 01 00 00 00 74 09 48 8d bb a0 00 00 00 eb 35 41 fe cc 74 0d f6 83 c0 01 00 00 04 74 04 <0f> 0b eb fe 48 89 75 e8 e8 be e0 de ff 66 83 8b c0 01 00 00 04
[  222.309311] RIP  [<ffffffff8121ad88>] blkiocg_set_start_empty_time+0x50/0x83
[  222.309311]  RSP <ffff8800ba6e79f8>
[  222.309311] ---[ end trace 32b4f71dffc15712 ]---

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Divyesh Shah <dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-26 19:25:11 +02:00
Vivek Goyal 7f1dc8a2d2 blkio: Fix blkio crash during rq stat update
blkio + cfq was crashing even when two sequential readers were put in two
separate cgroups (group_isolation=0).

The reason being that cfqq can migrate across groups based on its being
sync-noidle or not, it can happen that at request insertion time, cfqq
belonged to one cfqg and at request dispatch time, it belonged to root
group. In this case request stats per cgroup can go wrong and it also runs
into BUG_ON().

This patch implements rq stashing away a cfq group pointer and not relying
on cfqq->cfqg pointer alone for rq stat accounting.

[   65.163523] ------------[ cut here ]------------
[   65.164301] kernel BUG at block/blk-cgroup.c:117!
[   65.164301] invalid opcode: 0000 [#1] SMP
[   65.164301] last sysfs file: /sys/devices/pci0000:00/0000:00:05.0/0000:60:00.1/host9/rport-9:0-0/target9:0:0/9:0:0:2/block/sde/stat
[   65.164301] CPU 1
[   65.164301] Modules linked in: dm_round_robin dm_multipath qla2xxx scsi_transport_fc dm_zero dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan]
[   65.164301]
[   65.164301] Pid: 4505, comm: fio Not tainted 2.6.34-rc4-blk-for-35 #34 0A98h/HP xw8600 Workstation
[   65.164301] RIP: 0010:[<ffffffff8121924f>]  [<ffffffff8121924f>] blkiocg_update_io_remove_stats+0x5b/0xaf
[   65.164301] RSP: 0018:ffff8800ba5a79e8  EFLAGS: 00010046
[   65.164301] RAX: 0000000000000096 RBX: ffff8800bb268d60 RCX: 0000000000000000
[   65.164301] RDX: ffff8800bb268eb8 RSI: 0000000000000000 RDI: ffff8800bb268e00
[   65.164301] RBP: ffff8800ba5a7a08 R08: 0000000000000064 R09: 0000000000000001
[   65.164301] R10: 0000000000079640 R11: ffff8800a0bd5bf0 R12: ffff8800bab4af01
[   65.164301] R13: ffff8800bab4af00 R14: ffff8800bb1d8928 R15: 0000000000000000
[   65.164301] FS:  00007f18f75056f0(0000) GS:ffff880001e40000(0000) knlGS:0000000000000000
[   65.164301] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   65.164301] CR2: 000000000040e7f0 CR3: 00000000ba52b000 CR4: 00000000000006e0
[   65.164301] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   65.164301] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   65.164301] Process fio (pid: 4505, threadinfo ffff8800ba5a6000, task ffff8800ba45ae80)
[   65.164301] Stack:
[   65.164301]  ffff8800ba5a7a08 ffff8800ba722540 ffff8800bab4af68 ffff8800bab4af68
[   65.164301] <0> ffff8800ba5a7a38 ffffffff8121d814 ffff8800ba722540 ffff8800bab4af68
[   65.164301] <0> ffff8800ba722540 ffff8800a08f6800 ffff8800ba5a7a68 ffffffff8121d8ca
[   65.164301] Call Trace:
[   65.164301]  [<ffffffff8121d814>] cfq_remove_request+0xe4/0x116
[   65.164301]  [<ffffffff8121d8ca>] cfq_dispatch_insert+0x84/0xe1
[   65.164301]  [<ffffffff8121e833>] cfq_dispatch_requests+0x767/0x8e8
[   65.164301]  [<ffffffff8120e524>] ? submit_bio+0xc3/0xcc
[   65.164301]  [<ffffffff810ad657>] ? sync_page_killable+0x0/0x35
[   65.164301]  [<ffffffff8120ea8d>] blk_peek_request+0x191/0x1a7
[   65.164301]  [<ffffffffa000109c>] ? dm_get_live_table+0x44/0x4f [dm_mod]
[   65.164301]  [<ffffffffa0002799>] dm_request_fn+0x38/0x14c [dm_mod]
[   65.164301]  [<ffffffff810ad657>] ? sync_page_killable+0x0/0x35
[   65.164301]  [<ffffffff8120f600>] __generic_unplug_device+0x32/0x37
[   65.164301]  [<ffffffff8120f8a0>] generic_unplug_device+0x2e/0x3c
[   65.164301]  [<ffffffffa00011a6>] dm_unplug_all+0x42/0x5b [dm_mod]
[   65.164301]  [<ffffffff8120b063>] blk_unplug+0x29/0x2d
[   65.164301]  [<ffffffff8120b079>] blk_backing_dev_unplug+0x12/0x14
[   65.164301]  [<ffffffff81108a82>] block_sync_page+0x35/0x39
[   65.164301]  [<ffffffff810ad64e>] sync_page+0x41/0x4a
[   65.164301]  [<ffffffff810ad665>] sync_page_killable+0xe/0x35
[   65.164301]  [<ffffffff81589027>] __wait_on_bit_lock+0x46/0x8f
[   65.164301]  [<ffffffff810ad52d>] __lock_page_killable+0x66/0x6d
[   65.164301]  [<ffffffff81055fd4>] ? wake_bit_function+0x0/0x33
[   65.164301]  [<ffffffff810ad560>] lock_page_killable+0x2c/0x2e
[   65.164301]  [<ffffffff810aebfd>] generic_file_aio_read+0x361/0x4f0
[   65.164301]  [<ffffffff810e906c>] do_sync_read+0xcb/0x108
[   65.164301]  [<ffffffff811e32a3>] ? security_file_permission+0x16/0x18
[   65.164301]  [<ffffffff810e96d3>] vfs_read+0xab/0x108
[   65.164301]  [<ffffffff810e97f0>] sys_read+0x4a/0x6e
[   65.164301]  [<ffffffff81002b5b>] system_call_fastpath+0x16/0x1b
[   65.164301] Code: 00 74 1c 48 8b 8b 60 01 00 00 48 85 c9 75 04 0f 0b eb fe 48 ff c9 48 89 8b 60 01 00 00 eb 1a 48 8b 8b 58 01 00 00 48 85 c9 75 04 <0f> 0b eb fe 48 ff c9 48 89 8b 58 01 00 00 45 84 e4 74 16 48 8b
[   65.164301] RIP  [<ffffffff8121924f>] blkiocg_update_io_remove_stats+0x5b/0xaf
[   65.164301]  RSP <ffff8800ba5a79e8>
[   65.164301] ---[ end trace 1b2b828753032e68 ]---

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-21 17:44:16 +02:00
Richard Kennedy a534dbe96e block: ensure jiffies wrap is handled correctly in blk_rq_timed_out_timer
blk_rq_timed_out_timer() relied on blk_add_timer() never returning a
timer value of zero, but commit 7838c15b8d
removed the code that bumped this value when it was zero.
Therefore when jiffies is near wrap we could get unlucky & not set the
timeout value correctly.

This patch uses a flag to indicate that the timeout value was set and so
handles jiffies wrap correctly, and it keeps all the logic in one
function so should be easier to maintain in the future.

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-21 17:42:08 +02:00
Divyesh Shah 8d2a91f896 blkio: Initialize blkg->stats_lock for the root cfqg too
This fixes the lockdep warning reported by Gui Jianfeng.

Signed-off-by: Divyesh Shah <dpshah@google.com>
Reviewed-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-16 08:10:51 +02:00
Divyesh Shah b6ac23af2c blkio: fix for modular blk-cgroup build
After merging the block tree, 20100414's linux-next build (x86_64
allmodconfig) failed like this:

ERROR: "get_gendisk" [block/blk-cgroup.ko] undefined!
ERROR: "sched_clock" [block/blk-cgroup.ko] undefined!

This happens because the two symbols aren't exported and hence not available
when blk-cgroup code is built as a module. I've tried to stay consistent with
the use of EXPORT_SYMBOL or EXPORT_SYMBOL_GPL with the other symbols in the
respective files.

Signed-off-by: Divyesh Shah <dpshah@google.com>
Acked-by: Gui Jianfeng <guijianfeng@cn.fujitsu.cn>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-15 08:54:59 +02:00
Richard Kennedy c0d97e9ca2 block: ensure jiffies wrap is handled correctly in blk_rq_timed_out_timer
blk_rq_timed_out_timer() relied on blk_add_timer() never returning a
timer value of zero, but commit 7838c15b8d
removed the code that bumped this value when it was zero.
Therefore when jiffies is near wrap we could get unlucky & not set the
timeout value correctly.

This patch uses a flag to indicate that the timeout value was set and so
handles jiffies wrap correctly, and it keeps all the logic in one
function so should be easier to maintain in the future.

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-14 20:53:37 +02:00
Divyesh Shah 28baf44299 blkio: Fix compile errors
Fixes compile errors in blk-cgroup code for empty_time stat and a merge fix in
CFQ. The first error was when CONFIG_DEBUG_CFQ_IOSCHED is not set.

Signed-off-by: Divyesh Shah <dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-14 11:22:38 +02:00
Jens Axboe 4facdaec1c Merge branch 'master' into for-2.6.35
Conflicts:
	block/blk-cgroup.c
	block/cfq-iosched.c

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-13 20:03:21 +02:00
Divyesh Shah a11cdaa7af block: Update to io-controller stats
Changelog from v1:
o Call blkiocg_update_idle_time_stats() at cfq_rq_enqueued() instead of at
  dispatch time.

Changelog from original patchset: (in response to Vivek Goyal's comments)
o group blkiocg_update_blkio_group_dequeue_stats() with other DEBUG functions
o rename blkiocg_update_set_active_queue_stats() to
  blkiocg_update_avg_queue_size_stats()
o s/request/io/ in blkiocg_update_request_add_stats() and
  blkiocg_update_request_remove_stats()
o Call cfq_del_timer() at request dispatch() instead of
  blkiocg_update_idle_time_stats()

Signed-off-by: Divyesh Shah<dpshah@google.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-13 19:59:17 +02:00
Gui Jianfeng 34d0f179d6 io-controller: Add a new interface "weight_device" for IO-Controller
Currently, IO Controller makes use of blkio.weight to assign weight for
all devices. Here a new user interface "blkio.weight_device" is introduced to
assign different weights for different devices. blkio.weight becomes the
default value for devices which are not configured by "blkio.weight_device"

You can use the following format to assigned specific weight for a given
device:
#echo "major:minor weight" > blkio.weight_device

major:minor represents device number.

And you can remove weight for a given device as following:
#echo "major:minor 0" > blkio.weight_device

V1->V2 changes:
- use user interface "weight_device" instead of "policy" suggested by Vivek
- rename some struct suggested by Vivek
- rebase to 2.6-block "for-linus" branch
- remove an useless list_empty check pointed out by Li Zefan
- some trivial typo fix

V2->V3 changes:
- Move policy_*_node() functions up to get rid of forward declarations
- rename related functions by adding prefix "blkio_"

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-13 10:14:20 +02:00
Linus Torvalds 2f4084209a Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: (34 commits)
  cfq-iosched: Fix the incorrect timeslice accounting with forced_dispatch
  loop: Update mtime when writing using aops
  block: expose the statistics in blkio.time and blkio.sectors for the root cgroup
  backing-dev: Handle class_create() failure
  Block: Fix block/elevator.c elevator_get() off-by-one error
  drbd: lc_element_by_index() never returns NULL
  cciss: unlock on error path
  cfq-iosched: Do not merge queues of BE and IDLE classes
  cfq-iosched: Add additional blktrace log messages in CFQ for easier debugging
  i2o: Remove the dangerous kobj_to_i2o_device macro
  block: remove 16 bytes of padding from struct request on 64bits
  cfq-iosched: fix a kbuild regression
  block: make CONFIG_BLK_CGROUP visible
  Remove GENHD_FL_DRIVERFS
  block: Export max number of segments and max segment size in sysfs
  block: Finalize conversion of block limits functions
  block: Fix overrun in lcm() and move it to lib
  vfs: improve writeback_inodes_wb()
  paride: fix off-by-one test
  drbd: fix al-to-on-disk-bitmap for 4k logical_block_size
  ...
2010-04-09 11:50:29 -07:00
Divyesh Shah 3440c49f5c cfq-iosched: Fix the incorrect timeslice accounting with forced_dispatch
When CFQ dispatches requests forcefully due to a barrier or changing iosched,
it runs through all cfqq's dispatching requests and then expires each queue.
However, it does not activate a cfqq before flushing its IOs resulting in
using stale values for computing slice_used.
This patch fixes it by calling activate queue before flushing reuqests from
each queue.

This is useful mostly for barrier requests because when the iosched is changing
it really doesnt matter if we have incorrect accounting since we're going to
break down all structures anyway.

We also now expire the current timeslice before moving on with the dispatch
to accurately account slice used for that cfqq.

Signed-off-by: Divyesh Shah<dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-09 09:29:57 +02:00
Divyesh Shah 812df48d12 blkio: Add more debug-only per-cgroup stats
1) group_wait_time - This is the amount of time the cgroup had to wait to get a
  timeslice for one of its queues from when it became busy, i.e., went from 0
  to 1 request queued. This is different from the io_wait_time which is the
  cumulative total of the amount of time spent by each IO in that cgroup waiting
  in the scheduler queue. This stat is a great way to find out any jobs in the
  fleet that are being starved or waiting for longer than what is expected (due
  to an IO controller bug or any other issue).
2) empty_time - This is the amount of time a cgroup spends w/o any pending
   requests. This stat is useful when a job does not seem to be able to use its
   assigned disk share by helping check if that is happening due to an IO
   controller bug or because the job is not submitting enough IOs.
3) idle_time - This is the amount of time spent by the IO scheduler idling
   for a given cgroup in anticipation of a better request than the exising ones
   from other queues/cgroups.

All these stats are recorded using start and stop events. When reading these
stats, we do not add the delta between the current time and the last start time
if we're between the start and stop events. We avoid doing this to make sure
that these numbers are always monotonically increasing when read. Since we're
using sched_clock() which may use the tsc as its source, it may induce some
inconsistency (due to tsc resync across cpus) if we included the current delta.

Signed-off-by: Divyesh Shah<dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-09 08:36:08 +02:00
Divyesh Shah cdc1184cf4 blkio: Add io_queued and avg_queue_size stats
These stats are useful for getting a feel for the queue depth of the cgroup,
i.e., how filled up its queues are at a given instant and over the existence of
the cgroup. This ability is useful when debugging problems in the wild as it
helps understand the application's IO pattern w/o having to read through the
userspace code (coz its tedious or just not available) or w/o the ability
to run blktrace (since you may not have root access and/or not want to disturb
performance).

Signed-off-by: Divyesh Shah<dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-09 08:36:08 +02:00
Divyesh Shah 812d402648 blkio: Add io_merged stat
This includes both the number of bios merged into requests belonging to this
cgroup as well as the number of requests merged together.
In the past, we've observed different merging behavior across upstream kernels,
some by design some actual bugs. This stat helps a lot in debugging such
problems when applications report decreased throughput with a new kernel
version.

This needed adding an extra elevator function to capture bios being merged as I
did not want to pollute elevator code with blkiocg knowledge and hence needed
the accounting invocation to come from CFQ.

Signed-off-by: Divyesh Shah<dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-09 08:36:07 +02:00
Divyesh Shah 84c124da9f blkio: Changes to IO controller additional stats patches
that include some minor fixes and addresses all comments.

Changelog: (most based on Vivek Goyal's comments)
o renamed blkiocg_reset_write to blkiocg_reset_stats
o more clarification in the documentation on io_service_time and io_wait_time
o Initialize blkg->stats_lock
o rename io_add_stat to blkio_add_stat and declare it static
o use bool for direction and sync
o derive direction and sync info from existing rq methods
o use 12 for major:minor string length
o define io_service_time better to cover the NCQ case
o add a separate reset_stats interface
o make the indexed stats a 2d array to simplify macro and function pointer code
o blkio.time now exports in jiffies as before
o Added stats description in patch description and
  Documentation/cgroup/blkio-controller.txt
o Prefix all stats functions with blkio and make them static as applicable
o replace IO_TYPE_MAX with IO_TYPE_TOTAL
o Moved #define constant to top of blk-cgroup.c
o Pass dev_t around instead of char *
o Add note to documentation file about resetting stats
o use BLK_CGROUP_MODULE in addition to BLK_CGROUP config option in #ifdef
  statements
o Avoid struct request specific knowledge in blk-cgroup. blk-cgroup.h now has
  rq_direction() and rq_sync() functions which are used by CFQ and when using
  io-controller at a higher level, bio_* functions can be added.

Signed-off-by: Divyesh Shah<dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-09 08:31:19 +02:00
Matthew Garrett 31373d09da laptop-mode: Make flushes per-device
One of the features of laptop-mode is that it forces a writeout of dirty
pages if something else triggers a physical read or write from a device.
The current implementation flushes pages on all devices, rather than only
the one that triggered the flush. This patch alters the behaviour so that
only the recently accessed block device is flushed, preventing other
disks being spun up for no terribly good reason.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-06 14:25:14 +02:00
Ricky Benitez a74b2adae0 block: expose the statistics in blkio.time and blkio.sectors for the root cgroup
Currently, the io statistics for the root cgroup are maintained, but
they are not shown because the device information is not available at
the point that the root blkio cgroup is created. This patch updates
the device information when the statistics are updated so that the
statistics become visible.

Signed-off-by: Ricky Benitez <rickyb@google.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-05 18:22:17 +02:00
Divyesh Shah 9195291e5f blkio: Increment the blkio cgroup stats for real now
We also add start_time_ns and io_start_time_ns fields to struct request
here to record the time when a request is created and when it is
dispatched to device. We use ns uints here as ms and jiffies are
not very useful for non-rotational media.

Signed-off-by: Divyesh Shah<dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-02 08:44:37 +02:00
Divyesh Shah 303a3acb23 blkio: Add io controller stats like
- io_service_time
- io_wait_time
- io_serviced
- io_service_bytes

These stats are accumulated per operation type helping us to distinguish between
read and write, and sync and async IO. This patch does not increment any of
these stats.

Signed-off-by: Divyesh Shah<dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-02 08:44:36 +02:00
Divyesh Shah 9a0785b0da blkio: Remove per-cfqq nr_sectors as we'll be passing
that info at request dispatch with other stats now. This patch removes the
existing support for accounting sectors for a blkio_group. This will be added
back differently in the next two patches.

Signed-off-by: Divyesh Shah<dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-02 08:44:36 +02:00
wzt.wzt@gmail.com a506aedc51 Block: Fix block/elevator.c elevator_get() off-by-one error
elevator_get() not check the name length, if the name length > sizeof(elv),
elv will miss the '\0'. And elv buffer will be replace "-iosched" as something
like aaaaaaaaa, then call request_module() can load an not trust module.

Signed-off-by: Zhitong Wang <zhitong.wangzt@alibaba-inc.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-02 08:41:14 +02:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Divyesh Shah 39c01b219f cfq-iosched: Do not merge queues of BE and IDLE classes
Even if they are found to be co-operating.

The prio_trees do not have any IDLE cfqqs on them. cfq_close_cooperator()
is called from cfq_select_queue() and cfq_completed_request(). The latter
ensures that the close cooperator code does not get invoked if the current
cfqq is of class IDLE but the former doesn't seem to have any such checks.
So an IDLE cfqq may get merged with a BE cfqq from the same group which
should be avoided.

Signed-off-by: Divyesh Shah<dpshah@google.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-03-25 15:46:38 +01:00
Divyesh Shah b1ffe737f5 cfq-iosched: Add additional blktrace log messages in CFQ for easier debugging
These have helped us debug some issues we've noticed in earlier IO
controller versions and should be useful now as well. The extra logging
covers:
- idling behavior. Since there are so many conditions based on which we decide
to idle or not, this patch adds a log message for some conditions that we've
found useful.
- workload slices and current prio and workload type

Changelog from v1:
o moved log message from cfq_set_active_queue() to __cfq_set_active_queue()
o changed queue_count to st->count

Signed-off-by: Divyesh Shah<dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-03-25 15:45:03 +01:00
Jens Axboe b4b7a4ef09 Merge branch 'master' into for-linus
Conflicts:
	block/Kconfig

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-03-19 08:05:10 +01:00
Shaohua Li e9ce335df5 cfq-iosched: fix a kbuild regression
Alex Shi reported a kbuild regression which is about 10% performance lost.
He bisected to this commit: 3dde36ddea.
The reason is cfqq_close() can't find close cooperator. Restoring
cfq_rq_close()'s threshold to original value makes the regression go away.

Since for_preempt parameter isn't used anymore, this patch deletes it.

Reported-by: Alex Shi <alex.shi@intel.com>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-03-19 08:03:04 +01:00
Li Zefan 910ac735ba block: make CONFIG_BLK_CGROUP visible
Make the config visible, so we can choose from CONFIG_BLK_CGROUP=y
and CONFIG_BLK_CGROUP=m when CONFIG_IOSCHED_CFQ=m.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-03-16 08:57:15 +01:00
Martin K. Petersen c77a5710b7 block: Export max number of segments and max segment size in sysfs
These two values are useful when debugging issues surrounding maximum
I/O size.  Put them in sysfs with the rest of the queue limits.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-03-15 12:48:00 +01:00
Martin K. Petersen 2cda2728aa block: Fix overrun in lcm() and move it to lib
lcm() was defined to take integer-sized arguments.  The supplied
arguments are multiplied, however, causing us to overflow given
sufficiently large input.  That in turn led to incorrect optimal I/O
size reporting in some cases (RAID over RAID).

Switch lcm() over to unsigned long similar to gcd() and move the
function from blk-settings.c to lib.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-03-15 12:47:59 +01:00
Linus Torvalds c32da02342 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (56 commits)
  doc: fix typo in comment explaining rb_tree usage
  Remove fs/ntfs/ChangeLog
  doc: fix console doc typo
  doc: cpuset: Update the cpuset flag file
  Fix of spelling in arch/sparc/kernel/leon_kernel.c no longer needed
  Remove drivers/parport/ChangeLog
  Remove drivers/char/ChangeLog
  doc: typo - Table 1-2 should refer to "status", not "statm"
  tree-wide: fix typos "ass?o[sc]iac?te" -> "associate" in comments
  No need to patch AMD-provided drivers/gpu/drm/radeon/atombios.h
  devres/irq: Fix devm_irq_match comment
  Remove reference to kthread_create_on_cpu
  tree-wide: Assorted spelling fixes
  tree-wide: fix 'lenght' typo in comments and code
  drm/kms: fix spelling in error message
  doc: capitalization and other minor fixes in pnp doc
  devres: typo fix s/dev/devm/
  Remove redundant trailing semicolons from macros
  fix typo "definetly" -> "definitely" in comment
  tree-wide: s/widht/width/g typo in comments
  ...

Fix trivial conflict in Documentation/laptops/00-INDEX
2010-03-12 16:04:50 -08:00
Ben Blum 67523c48aa cgroups: blkio subsystem as module
Modify the Block I/O cgroup subsystem to be able to be built as a module.
As the CFQ disk scheduler optionally depends on blk-cgroup, config options
in block/Kconfig, block/Kconfig.iosched, and block/blk-cgroup.h are
enhanced to support the new module dependency.

Signed-off-by: Ben Blum <bblum@andrew.cmu.edu>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12 15:52:36 -08:00
Jiri Kosina 318ae2edc3 Merge branch 'for-next' into for-linus
Conflicts:
	Documentation/filesystems/proc.txt
	arch/arm/mach-u300/include/mach/debug-macro.S
	drivers/net/qlge/qlge_ethtool.c
	drivers/net/qlge/qlge_main.c
	drivers/net/typhoon.c
2010-03-08 16:55:37 +01:00
Emese Revfy 52cf25d0ab Driver core: Constify struct sysfs_ops in struct kobj_type
Constify struct sysfs_ops.

This is part of the ops structure constification
effort started by Arjan van de Ven et al.

Benefits of this constification:

 * prevents modification of data that is shared
   (referenced) by many other structure instances
   at runtime

 * detects/prevents accidental (but not intentional)
   modification attempts on archs that enforce
   read-only kernel data at runtime

 * potentially better optimized code as the compiler
   can assume that the const data cannot be changed

 * the compiler/linker move const data into .rodata
   and therefore exclude them from false sharing

Signed-off-by: Emese Revfy <re.emese@gmail.com>
Acked-by: David Teigland <teigland@redhat.com>
Acked-by: Matt Domsch <Matt_Domsch@dell.com>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Acked-by: Hans J. Koch <hjk@linutronix.de>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:49 -08:00
Richard Kennedy 4671a13220 block: don't access jiffies when initialising io_context
As the comment says the initial value of last_waited is never used, so
there is no need to initialise it with the current jiffies. Jiffies is
hot enough without accessing it for no reason.

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-03-01 10:57:22 +01:00
Richard Kennedy 73e9ffdd0c cfq: remove 8 bytes of padding from cfq_rb_root on 64 bit builds
Reorder cfq_rb_root to remove 8 bytes of padding on 64 bit builds.

Consequently removing 56 bytes from cfq_group and 64 bytes from
cfq_data.

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-03-01 10:50:20 +01:00
Shaohua Li abc3c744d0 cfq-iosched: quantum check tweak
Currently a queue can only dispatch up to 4 requests if there are other queues.
This isn't optimal, device can handle more requests, for example, AHCI can
handle 31 requests. I can understand the limit is for fairness, but we could
do a tweak: if the queue still has a lot of slice left, sounds we could
ignore the limit. Test shows this boost my workload (two thread randread of
a SSD) from 78m/s to 100m/s.
Thanks for suggestions from Corrado and Vivek for the patch.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-03-01 09:20:54 +01:00