Commit graph

25 commits

Author SHA1 Message Date
Parav Pandit
fe2caefcdf RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapter
Signed-off-by: Parav Pandit <parav.pandit@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08 11:17:47 -07:00
Bart Van Assche
a42d985bd5 ib_srpt: Initial SRP Target merge for v3.3-rc1
This patch adds the kernel module ib_srpt SCSI RDMA Protocol (SRP) target
implementation conforming to the SRP r16a specification for the mainline
drivers/target infrastructure.

This driver was originally developed by Vu Pham and has been optimized by
Bart Van Assche and merged into upstream LIO based on his srpt-lio-4.1
branch here:

   https://github.com/bvanassche/srpt-lio/commits/srpt-lio-4.1/

This updated patch also contains the following two changes from
lio-core-2.6.git/master.  One is to fix a bug with 1 >= task->task_sg[]
chained mappings in ib_srpt, and the other to convert the configfs control
plane to reference IB Port GUID and struct srpt_port directly following
mainline v4.x target_core_fabric_configfs.c convertion for ib_srpt
to work with rtslib/rtsadmin v2 code.

These seperate patches can be found here:

ib_srpt: Fix bug with chainged SGLs in srpt_map_sg_to_ib_sge
http://www.risingtidesystems.com/git/?p=lio-core-2.6.git;a=commitdiff;h=ea485147563b6555a97dbf811825fbb586519252

ib_srpt: Convert se_wwn endpoint reference to struct srpt_port->port_wwn
http://www.risingtidesystems.com/git/?p=lio-core-2.6.git;a=commitdiff;h=4e544a210acb227df1bb4ca5086e65bdf4e648ea

This also includes the following recent v1 -> v2 review changes:

ib_srpt: Fix potential out-of-bounds array access
ib_srpt: Avoid failed multipart RDMA transfers
ib_srpt: Fix srpt_alloc_fabric_acl failure case return value
ib_srpt: Update comments to reference $driver/$port layout
ib_srpt: Fix sport->port_guid formatting code
ib_srpt: Remove legacy use_port_guid_in_session_name module parameter
ib_srpt: Convert srp_max_rdma_size into per port configfs attribute
ib_srpt: Convert srp_max_rsp_size into per port configfs attribute
ib_srpt: Convert srpt_sq_size into per port configfs attribute

and v2 -> v3 review changes:

ib_srpt: Fix possible race with srp_sq_size in srpt_create_ch_ib
ib_srpt: Fix possible race with srp_max_rsp_size in srpt_release_channel_work
ib_srpt: Fix up MAX_SRPT_RDMA_SIZE define
ib_srpt: Make srpt_map_sg_to_ib_sge() failure case return -EAGAIN
ib_srpt: Convert port_guid to use subnet_prefix + interface_id formatting
ib_srpt: Make srpt_check_stop_free return kref_put status
ib_srpt: Make compilation with BUG=n proceed`
ib_srpt: Use new target_core_fabric.h include
ib_srpt: Check hex2bin() return code to silence build warning

Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Roland Dreier <roland@purestorage.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Vu Pham <vu@mellanox.com>
Cc: David Dillow <dillowda@ornl.gov>
Signed-off-by: Nicholas A. Bellinger <nab@risingtidesystems.com>
2011-12-16 06:33:56 +00:00
Roland Dreier
b2cbae2c24 RDMA: Add netlink infrastructure
Add basic RDMA netlink infrastructure that allows for registration of
RDMA clients for which data is to be exported and supplies message
construction callbacks.

Signed-off-by: Nir Muchtar <nirm@voltaire.com>

[ Reorganize a few things, add CONFIG_NET dependency.  - Roland ]

Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-05-20 11:46:11 -07:00
Justin P. Mattock
631dd1a885 Update broken web addresses in the kernel.
The patch below updates broken web addresses in the kernel

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Finn Thain <fthain@telegraphics.com.au>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Dimitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Mike Frysinger <vapier.adi@gmail.com>
Acked-by: Ben Pfaff <blp@cs.stanford.edu>
Acked-by: Hans J. Koch <hjk@linutronix.de>
Reviewed-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-18 11:03:14 +02:00
Ralph Campbell
f931551baf IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters
Add a low-level IB driver for QLogic PCIe adapters.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-23 21:44:54 -07:00
Steve Wise
cfdda9d764 RDMA/cxgb4: Add driver for Chelsio T4 RNIC
Add an RDMA/iWARP driver for Chelsio T4 Ethernet adapters.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-04-21 15:30:06 -07:00
Roland Dreier
a265e5587f IB/uverbs: Use anon_inodes instead of private infinibandeventfs
The anon_inodes interface has been split to allow creating a bare
(non-installed) file pointer and also extended to allow specifying
O_RDONLY in the flags.  This makes it a suitable replacement for the
private "infinibandeventfs" pseudo-filesystem used by uverbs, and this
replacement saves a small chunk of boilerplate code.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-24 16:51:20 -08:00
Roland Dreier
2c4ab6243f RDMA/addr: Fix build breakage when IPv6 is disabled
Commit 38617c64 ("RDMA/addr: Add support for translating IPv6
addresses") broke the build when CONFIG_IPV6=n, because the ib_addr
module unconditionally attempted to call ipv6_chk_addr() and other
IPv6 functions that are not defined when IPv6 is disabled.  Fix this
by only building IPv6 support if CONFIG_IPV6 is turned on, and
add a Kconfig dependency to prevent the ib_addr code from being built
in when IPv6 is built modular.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-29 23:37:14 -08:00
Glenn Streiff
3c2d774cad RDMA/nes: Add a driver for NetEffect RNICs
Add a standard NIC and RDMA/iWARP driver for NetEffect 1/10Gb ethernet adapters.

Signed-off-by: Glenn Streiff <gstreiff@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-04 20:20:45 -08:00
Jan Engelhardt
06cc85086e IB: Use menuconfig for InfiniBand menu
Change Kconfig objects from "menu, config" into "menuconfig" so
that the user can disable the whole feature without having to
enter the menu first.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09 20:12:26 -07:00
Martin Schwidefsky
e25df1205f [S390] Kconfig: menus with depends on HAS_IOMEM.
Add "depends on HAS_IOMEM" to a number of menus to make them
disappear for s390 which does not have I/O memory.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-10 15:46:07 +02:00
Roland Dreier
225c7b1fee IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters
Add an InfiniBand driver for Mellanox ConnectX adapters.  Because
these adapters can also be used as ethernet NICs and Fibre Channel 
HBAs, the driver is split into two modules: 
 
  mlx4_core: Handles low-level things like device initialization and 
    processing firmware commands.  Also controls resource allocation 
    so that the InfiniBand, ethernet and FC functions can share a 
    device without stepping on each other. 
 
  mlx4_ib: Handles InfiniBand-specific things; plugs into the 
    InfiniBand midlayer. 

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-08 18:00:38 -07:00
Roland Dreier
f7c6a7b5d5 IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules
Export ib_umem_get()/ib_umem_release() and put low-level drivers in
control of when to call ib_umem_get() to pin and DMA map userspace,
rather than always calling it in ib_uverbs_reg_mr() before calling the
low-level driver's reg_user_mr method.

Also move these functions to be in the ib_core module instead of
ib_uverbs, so that driver modules using them do not depend on
ib_uverbs.

This has a number of advantages:
 - It is better design from the standpoint of making generic code a
   library that can be used or overridden by device-specific code as
   the details of specific devices dictate.
 - Drivers that do not need to pin userspace memory regions do not
   need to take the performance hit of calling ib_mem_get().  For
   example, although I have not tried to implement it in this patch,
   the ipath driver should be able to avoid pinning memory and just
   use copy_{to,from}_user() to access userspace memory regions.
 - Buffers that need special mapping treatment can be identified by
   the low-level driver.  For example, it may be possible to solve
   some Altix-specific memory ordering issues with mthca CQs in
   userspace by mapping CQ buffers with extra flags.
 - Drivers that need to pin and DMA map userspace memory for things
   other than memory regions can use ib_umem_get() directly, instead
   of hacks using extra parameters to their reg_phys_mr method.  For
   example, the mlx4 driver that is pending being merged needs to pin
   and DMA map QP and CQ buffers, but it does not need to create a
   memory key for these buffers.  So the cleanest solution is for mlx4
   to call ib_umem_get() in the create_qp and create_cq methods.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-08 18:00:37 -07:00
Steve Wise
b038ced7b3 RDMA/cxgb3: Add driver for Chelsio T3 RNIC
Add an RDMA/iWARP driver for the Chelsio T3 1GbE and 10GbE adapters.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-12 16:16:18 -08:00
Tom Tucker
f94b533d09 RDMA/amso1100: Add driver for Ammasso 1100 RNIC
Add a driver for the Ammasso 1100 gigabit ethernet RNIC.

Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:48 -07:00
Roland Dreier
3cd965646b IB: Whitespace fixes
Remove some trailing whitespace that has snuck in despite the best
efforts of whitespace=error-all.  Also fix a few other whitespace
bogosities.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:46 -07:00
Heiko J Schick
fab97220c9 IB/ehca: Add driver for IBM eHCA InfiniBand adapters
Add a driver for IBM GX bus InfiniBand adapters, which are usable with
some pSeries/System p systems.

Signed-off-by: Heiko J Schick <schickhj.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:22 -07:00
Or Gerlitz
3f1244a2f8 IB/iser: iSER Kconfig and Makefile
Kconfig and Makefile for iSER.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-22 07:51:14 -07:00
Sean Hefty
7025fcd36b IB: address translation to map IP toIB addresses (GIDs)
Add an address translation service that maps IP addresses to
InfiniBand GID addresses using IPoIB.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:28 -07:00
Bryan O'Sullivan
77d8798b55 IB/ipath: kbuild infrastructure
Integrate the ipath core and OpenIB drivers into the kernel build
infrastructure.  Add entry to MAINTAINERS.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-31 13:14:21 -08:00
Roland Dreier
aef9ec39c4 IB: Add SCSI RDMA Protocol (SRP) initiator
Add an InfiniBand SCSI RDMA Protocol (SRP) initiator.  This driver is
used to talk talk to InfiniBand SRP targets (storage devices).

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-02 14:07:13 -08:00
James Lentini
17781cd618 [PATCH] IB: clean up user access config options
Add a new config option INFINIBAND_USER_MAD to control whether we
build ib_umad.  Change INFINIBAND_USER_VERBS to INFINIBAND_USER_ACCESS,
and have it control ib_ucm and ib_uat as well as ib_uverbs.

Signed-off-by: James Lentini <jlentini@netapp.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-09-07 12:43:08 -07:00
Al Viro
a2b2f45be7 [PATCH] Kconfig fix (infiniband and PCI)
infiniband uses PCI helpers all over the place (including the core parts) and
won't build without PCI.

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-23 18:43:41 -07:00
Roland Dreier
2d927d696c [PATCH] IB uverbs: hook up Kconfig/Makefile
Hook up InfiniBand userspace verbs to Kconfig and the make system.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:48 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00