Commit graph

103 commits

Author SHA1 Message Date
Linus Torvalds
8623661180 Merge branch 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (244 commits)
  Revert "x86, bts: reenable ptrace branch trace support"
  tracing: do not translate event helper macros in print format
  ftrace/documentation: fix typo in function grapher name
  tracing/events: convert block trace points to TRACE_EVENT(), fix !CONFIG_BLOCK
  tracing: add protection around module events unload
  tracing: add trace_seq_vprint interface
  tracing: fix the block trace points print size
  tracing/events: convert block trace points to TRACE_EVENT()
  ring-buffer: fix ret in rb_add_time_stamp
  ring-buffer: pass in lockdep class key for reader_lock
  tracing: add annotation to what type of stack trace is recorded
  tracing: fix multiple use of __print_flags and __print_symbolic
  tracing/events: fix output format of user stack
  tracing/events: fix output format of kernel stack
  tracing/trace_stack: fix the number of entries in the header
  ring-buffer: discard timestamps that are at the start of the buffer
  ring-buffer: try to discard unneeded timestamps
  ring-buffer: fix bug in ring_buffer_discard_commit
  ftrace: do not profile functions when disabled
  tracing: make trace pipe recognize latency format flag
  ...
2009-06-10 19:53:40 -07:00
Linus Torvalds
be15f9d63b Merge branch 'x86-xen-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-xen-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (42 commits)
  xen: cache cr0 value to avoid trap'n'emulate for read_cr0
  xen/x86-64: clean up warnings about IST-using traps
  xen/x86-64: fix breakpoints and hardware watchpoints
  xen: reserve Xen start_info rather than e820 reserving
  xen: add FIX_TEXT_POKE to fixmap
  lguest: update lazy mmu changes to match lguest's use of kvm hypercalls
  xen: honour VCPU availability on boot
  xen: add "capabilities" file
  xen: drop kexec bits from /sys/hypervisor since kexec isn't implemented yet
  xen/sys/hypervisor: change writable_pt to features
  xen: add /sys/hypervisor support
  xen/xenbus: export xenbus_dev_changed
  xen: use device model for suspending xenbus devices
  xen: remove suspend_cancel hook
  xen/dev-evtchn: clean up locking in evtchn
  xen: export ioctl headers to userspace
  xen: add /dev/xen/evtchn driver
  xen: add irq_from_evtchn
  xen: clean up gate trap/interrupt constants
  xen: set _PAGE_NX in __supported_pte_mask before pagetable construction
  ...
2009-06-10 16:16:27 -07:00
Amerigo Wang
bf78ad69cd x86: process.c, remove useless headers
<stdarg.h> is not needed by these files, remove them.

[ Impact: cleanup ]

Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: akpm@linux-foundation.org
LKML-Reference: <20090512032956.5040.77055.sendpatchset@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-12 11:26:32 +02:00
Amerigo Wang
9d62dcdfa6 x86: merge process.c a bit
Merge arch_align_stack() and arch_randomize_brk(), since
they are the same.

Tested on x86_64.

[ Impact: cleanup ]

Signed-off-by: Amerigo Wang <amwang@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-12 11:13:45 +02:00
Jeremy Fitzhardinge
38f4b8c0da Merge commit 'origin/master' into for-linus/xen/master
* commit 'origin/master': (4825 commits)
  Fix build errors due to CONFIG_BRANCH_TRACER=y
  parport: Use the PCI IRQ if offered
  tty: jsm cleanups
  Adjust path to gpio headers
  KGDB_SERIAL_CONSOLE check for module
  Change KCONFIG name
  tty: Blackin CTS/RTS
  Change hardware flow control from poll to interrupt driven
  Add support for the MAX3100 SPI UART.
  lanana: assign a device name and numbering for MAX3100
  serqt: initial clean up pass for tty side
  tty: Use the generic RS485 ioctl on CRIS
  tty: Correct inline types for tty_driver_kref_get()
  splice: fix deadlock in splicing to file
  nilfs2: support nanosecond timestamp
  nilfs2: introduce secondary super block
  nilfs2: simplify handling of active state of segments
  nilfs2: mark minor flag for checkpoint created by internal operation
  nilfs2: clean up sketch file
  nilfs2: super block operations fix endian bug
  ...

Conflicts:
	arch/x86/include/asm/thread_info.h
	arch/x86/lguest/boot.c
	drivers/xen/manage.c
2009-04-07 13:34:16 -07:00
Markus Metzger
2311f0de21 x86, ds: add leakage warning
Add a warning in case a debug store context is not removed before
the task it is attached to is freed.

Remove the old warning at thread exit. It is too early.

Declare the debug store context field in thread_struct unconditionally.

Remove ds_copy_thread() and ds_exit_thread() and do the work directly
in process*.c.

Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Cc: roland@redhat.com
Cc: eranian@googlemail.com
Cc: oleg@redhat.com
Cc: juan.villacis@intel.com
Cc: ak@linux.jf.intel.com
LKML-Reference: <20090403144601.254472000@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-07 13:36:28 +02:00
Alexey Dobriyan
6f2c55b843 Simplify copy_thread()
First argument unused since 2.3.11.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:51 -07:00
Jeremy Fitzhardinge
224101ed69 x86/paravirt: finish change from lazy cpu to context switch start/end
Impact: fix lazy context switch API

Pass the previous and next tasks into the context switch start
end calls, so that the called functions can properly access the
task state (esp in end_context_switch, in which the next task
is not yet completely current).

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-03-29 23:36:01 -07:00
Jeremy Fitzhardinge
7fd7d83d49 x86/pvops: replace arch_enter_lazy_cpu_mode with arch_start_context_switch
Impact: simplification, prepare for later changes

Make lazy cpu mode more specific to context switching, so that
it makes sense to do more context-switch specific things in
the callbacks.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-03-29 23:35:59 -07:00
Jeremy Fitzhardinge
389d1fb11e x86: unify chunks of kernel/process*.c
With x86-32 and -64 using the same mechanism for managing the
tss io permissions bitmap, large chunks of process*.c are
trivially unifyable, including:

 - exit_thread
 - flush_thread
 - __switch_to_xtra (along with tsc enable/disable)

and as bonus pickups:

 - sys_fork
 - sys_vfork

(Note: asmlinkage expands to empty on x86-64)

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-02 12:07:48 +01:00
Jeremy Fitzhardinge
db949bba3c x86-32: use non-lazy io bitmap context switching
Impact: remove 32-bit optimization to prepare unification

x86-32 and -64 differ in the way they context-switch tasks
with io permission bitmaps.  x86-64 simply copies the next
tasks io bitmap into place (if any) on context switch.  x86-32
invalidates the bitmap on context switch, so that the next
IO instruction will fault; at that point it installs the
appropriate IO bitmap.

This makes context switching IO-bitmap-using tasks a bit more
less expensive, at the cost of making the next IO instruction
slower due to the extra fault.  This tradeoff only makes sense
if IO-bitmap-using processes are relatively common, but they
don't actually use IO instructions very often.

However, in a typical desktop system, the only process likely
to be using IO bitmaps is the X server, and nothing at all on
a server.  Therefore the lazy context switch doesn't really win
all that much, and its just a gratuitious difference from
64-bit code.

This patch removes the lazy context switch, with a view to
unifying this code in a later change.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-02 12:07:48 +01:00
Ingo Molnar
fc6fc7f1b1 Merge branch 'linus' into x86/apic
Conflicts:
	arch/x86/mach-default/setup.c

Semantic conflict resolution:
	arch/x86/kernel/setup.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-22 20:05:19 +01:00
Paul E. McKenney
bf51935f3e x86, rcu: fix strange load average and ksoftirqd behavior
Damien Wyart reported high ksoftirqd CPU usage (20%) on an
otherwise idle system.

The function-graph trace Damien provided:

>   799.521187 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.521371 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.521555 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.521738 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.521934 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.522068 |   1)  ksoftir-2324  |               |                rcu_check_callbacks() {
>   799.522208 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.522392 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.522575 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.522759 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.522956 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.523074 |   1)  ksoftir-2324  |               |                  rcu_check_callbacks() {
>   799.523214 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.523397 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.523579 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.523762 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.523960 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.524079 |   1)  ksoftir-2324  |               |                  rcu_check_callbacks() {
>   799.524220 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.524403 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.524587 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
>   799.524770 |   1)    <idle>-0    |               |  rcu_check_callbacks() {
> [ . . . ]

Shows rcu_check_callbacks() being invoked way too often. It should be called
once per jiffy, and here it is called no less than 22 times in about
3.5 milliseconds, meaning one call every 160 microseconds or so.

Why do we need to call rcu_pending() and rcu_check_callbacks() from the
idle loop of 32-bit x86, especially given that no other architecture does
this?

The following patch removes the call to rcu_pending() and
rcu_check_callbacks() from the x86 32-bit idle loop in order to
reduce the softirq load on idle systems.

Reported-by: Damien Wyart <damien.wyart@free.fr>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17 22:47:45 +01:00
Brian Gerst
b12bdaf11f x86: use regparm(3) for passed-in pt_regs pointer
Some syscalls need to access the pt_regs structure, either to copy
user register state or to modifiy it.  This patch adds stubs to load
the address of the pt_regs struct into the %eax register, and changes
the syscalls to take the pointer as an argument instead of relying on
the assumption that the pt_regs structure overlaps the function
arguments.

Drop the use of regparm(1) due to concern about gcc bugs, and to move
in the direction of the eventual removal of regparm(0) for asmlinkage.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2009-02-11 14:00:56 -08:00
Brian Gerst
253f29a4ae x86: pass in pt_regs pointer for syscalls that need it
Some syscalls need to access the pt_regs structure, either to copy
user register state or to modifiy it.  This patch adds stubs to load
the address of the pt_regs struct into the %eax register, and changes
the syscalls to regparm(1) to receive the pt_regs pointer as the
first argument.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-11 12:40:45 +01:00
Tejun Heo
5c79d2a517 x86: fix x86_32 stack protector bugs
Impact: fix x86_32 stack protector

Brian Gerst found out that %gs was being initialized to stack_canary
instead of stack_canary - 20, which basically gave the same canary
value for all threads.  Fixing this also exposed the following bugs.

* cpu_idle() didn't call boot_init_stack_canary()

* stack canary switching in switch_to() was being done too late making
  the initial run of a new thread use the old stack canary value.

Fix all of them and while at it update comment in cpu_idle() about
calling boot_init_stack_canary().

Reported-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-11 11:33:49 +01:00
Tejun Heo
60a5317ff0 x86: implement x86_32 stack protector
Impact: stack protector for x86_32

Implement stack protector for x86_32.  GDT entry 28 is used for it.
It's set to point to stack_canary-20 and have the length of 24 bytes.
CONFIG_CC_STACKPROTECTOR turns off CONFIG_X86_32_LAZY_GS and sets %gs
to the stack canary segment on entry.  As %gs is otherwise unused by
the kernel, the canary can be anywhere.  It's defined as a percpu
variable.

x86_32 exception handlers take register frame on stack directly as
struct pt_regs.  With -fstack-protector turned on, gcc copies the
whole structure after the stack canary and (of course) doesn't copy
back on return thus losing all changed.  For now, -fno-stack-protector
is added to all files which contain those functions.  We definitely
need something better.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-10 00:42:01 +01:00
Tejun Heo
ccbeed3a05 x86: make lazy %gs optional on x86_32
Impact: pt_regs changed, lazy gs handling made optional, add slight
        overhead to SAVE_ALL, simplifies error_code path a bit

On x86_32, %gs hasn't been used by kernel and handled lazily.  pt_regs
doesn't have place for it and gs is saved/loaded only when necessary.
In preparation for stack protector support, this patch makes lazy %gs
handling optional by doing the followings.

* Add CONFIG_X86_32_LAZY_GS and place for gs in pt_regs.

* Save and restore %gs along with other registers in entry_32.S unless
  LAZY_GS.  Note that this unfortunately adds "pushl $0" on SAVE_ALL
  even when LAZY_GS.  However, it adds no overhead to common exit path
  and simplifies entry path with error code.

* Define different user_gs accessors depending on LAZY_GS and add
  lazy_save_gs() and lazy_load_gs() which are noop if !LAZY_GS.  The
  lazy_*_gs() ops are used to save, load and clear %gs lazily.

* Define ELF_CORE_COPY_KERNEL_REGS() which always read %gs directly.

xen and lguest changes need to be verified.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-10 00:42:00 +01:00
Tejun Heo
d9a89a26e0 x86: add %gs accessors for x86_32
Impact: cleanup

On x86_32, %gs is handled lazily.  It's not saved and restored on
kernel entry/exit but only when necessary which usually is during task
switch but there are few other places.  Currently, it's done by
calling savesegment() and loadsegment() explicitly.  Define
get_user_gs(), set_user_gs() and task_user_gs() and use them instead.

While at it, clean up register access macros in signal.c.

This cleans up code a bit and will help future changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-10 00:41:58 +01:00
Brian Gerst
03d2989df9 x86: remove idle_timestamp from 32bit irq_cpustat_t
Impact: bogus irq_cpustat field removed

idle_timestamp is left over from the removed irqbalance code.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-23 11:03:28 +09:00
Brian Gerst
ea9279066d x86-64: Move cpu number from PDA to per-cpu and consolidate with 32-bit.
tj: moved cpu_number definition out of CONFIG_HAVE_SETUP_PER_CPU_AREA
    for voyager.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-19 00:38:58 +09:00
Ingo Molnar
6dbde35308 percpu: add optimized generic percpu accessors
It is an optimization and a cleanup, and adds the following new
generic percpu methods:

  percpu_read()
  percpu_write()
  percpu_add()
  percpu_sub()
  percpu_and()
  percpu_or()
  percpu_xor()

and implements support for them on x86. (other architectures will fall
back to a default implementation)

The advantage is that for example to read a local percpu variable,
instead of this sequence:

 return __get_cpu_var(var);

 ffffffff8102ca2b:	48 8b 14 fd 80 09 74 	mov    -0x7e8bf680(,%rdi,8),%rdx
 ffffffff8102ca32:	81
 ffffffff8102ca33:	48 c7 c0 d8 59 00 00 	mov    $0x59d8,%rax
 ffffffff8102ca3a:	48 8b 04 10          	mov    (%rax,%rdx,1),%rax

We can get a single instruction by using the optimized variants:

 return percpu_read(var);

 ffffffff8102ca3f:	65 48 8b 05 91 8f fd 	mov    %gs:0x7efd8f91(%rip),%rax

I also cleaned up the x86-specific APIs and made the x86 code use
these new generic percpu primitives.

tj: * fixed generic percpu_sub() definition as Roel Kluin pointed out
    * added percpu_and() for completeness's sake
    * made generic percpu ops atomic against preemption

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-16 14:20:31 +01:00
Jaswinder Singh Rajput
befa9e780d x86: process_32.c fix style problems
Impact: cleanup

Fix:

 WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>
 WARNING: Use #include <linux/io.h> instead of <asm/io.h>
 WARNING: Use #include <linux/kdebug.h> instead of <asm/kdebug.h>
 WARNING: Use #include <linux/smp.h> instead of <asm/smp.h>
 ERROR: "foo * bar" should be "foo *bar"
 ERROR: trailing whitespace
 ERROR: spaces required around that ':' (ctx:WxO)
 ERROR: spaces required around that ':' (ctx:OxW)

 total: 7 errors, 4 warnings

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-04 13:23:03 +01:00
Markus Metzger
bf53de907d x86, bts: add fork and exit handling
Impact: introduce new ptrace facility

Add arch_ptrace_untrace() function that is called when the tracer
detaches (either voluntarily or when the tracing task dies);
ptrace_disable() is only called on a voluntary detach.

Add ptrace_fork() and arch_ptrace_fork(). They are called when a
traced task is forked.

Clear DS and BTS related fields on fork.

Release DS resources and reclaim memory in ptrace_untrace(). This
releases resources already when the tracing task dies. We used to do
that when the traced task dies.

Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-20 09:15:46 +01:00
Markus Metzger
c2724775ce x86, bts: provide in-kernel branch-trace interface
Impact: cleanup

Move the BTS bits from ptrace.c into ds.c.

Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-12 08:08:12 +01:00
Frederic Weisbecker
8b96f01198 tracing/function-graph-tracer: introduce __notrace_funcgraph to filter special functions
Impact: trace more functions

When the function graph tracer is configured, three more files are not
traced to prevent only four functions to be traced. And this impacts the
normal function tracer too.

arch/x86/kernel/process_64/32.c:

I had crashes when I let this file traced. After some debugging, I saw
that the "current" task point was changed inside__swtich_to(), ie:
"write_pda(pcurrent, next_p);" inside process_64.c Since the tracer store
the original return address of the function inside current, we had
crashes. Only __switch_to() has to be excluded from tracing.

kernel/module.c and kernel/extable.c:

Because of a function used internally by the function graph tracer:
__kernel_text_address()

To let the other functions inside these files to be traced, this patch
introduces the __notrace_funcgraph function prefix which is __notrace if
function graph tracer is configured and nothing if not.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-08 15:11:44 +01:00
Pekka Enberg
e2ce07c804 x86: __show_registers() and __show_regs() API unification
Currently the low-level function to dump user-passed registers on i386 is
called __show_registers() whereas on x86-64 it's called __show_regs(). Unify
the API to simplify porting of kmemcheck to x86-64.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13 10:33:04 +02:00
Ingo Molnar
365d46dc9b Merge branch 'linus' into x86/xen
Conflicts:
	arch/x86/kernel/cpu/common.c
	arch/x86/kernel/process_64.c
	arch/x86/xen/enlighten.c
2008-10-12 12:37:32 +02:00
Ingo Molnar
e496e3d645 Merge branches 'x86/alternatives', 'x86/cleanups', 'x86/commandline', 'x86/crashdump', 'x86/debug', 'x86/defconfig', 'x86/doc', 'x86/exports', 'x86/fpu', 'x86/gart', 'x86/idle', 'x86/mm', 'x86/mtrr', 'x86/nmi-watchdog', 'x86/oprofile', 'x86/paravirt', 'x86/reboot', 'x86/sparse-fixes', 'x86/tsc', 'x86/urgent' and 'x86/vmalloc' into x86-v28-for-linus-phase1 2008-10-06 18:17:07 +02:00
Ingo Molnar
0962f402af Merge branch 'x86/prototypes' into x86-v28-for-linus-phase1
Conflicts:
	arch/x86/kernel/process_32.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-06 18:06:53 +02:00
Ingo Molnar
19268ed744 Merge branch 'x86/pebs' into x86-v28-for-linus-phase1
Conflicts:
	include/asm-x86/ds.h

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-06 16:17:23 +02:00
Ingo Molnar
ebdd90a8cb Merge commit 'v2.6.27-rc7' into x86/pebs 2008-09-24 09:56:20 +02:00
Marc Dionne
1eda81495a x86: prevent stale state of c1e_mask across CPU offline/online, fix
Fix build error introduced by commit 4faac97d44 ("x86: prevent stale
state of c1e_mask across CPU offline/online").

process_32.c needs to include idle.h to get the prototype for
c1e_remove_cpu()

Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-24 09:30:10 +02:00
Thomas Gleixner
4faac97d44 x86: prevent stale state of c1e_mask across CPU offline/online
Impact: hang which happens across CPU offline/online on AMD C1E systems.

When a CPU goes offline then the corresponding bit in the broadcast
mask is cleared. For AMD C1E enabled CPUs we do not reenable the
broadcast when the CPU comes online again as we do not clear the
corresponding bit in the c1e_mask, which keeps track which CPUs
have been switched to broadcast already. So on those !$@#& machines
we never switch back to broadcasting after a CPU offline/online cycle.

Clear the bit when the CPU plays dead.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-09-23 11:38:52 +02:00
Ingo Molnar
0b88641f1b Merge commit 'v2.6.27-rc7' into x86/debug 2008-09-22 13:08:57 +02:00
Arjan van de Ven
90f7d25c6b x86: print DMI information in the oops trace
in order to diagnose hard system specific issues, it's useful to
have the system name in the oops (as provided by DMI)

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-17 11:53:03 +02:00
Alex Nixon
913da64b54 x86: build fix for !CONFIG_SMP
Move reset_lazy_tlbstate into tlb_32.c, and define noop versions of
play_dead() in process_{32,64}.c when !CONFIG_SMP.

Signed-off-by: Alex Nixon <alex.nixon@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-05 17:44:08 +02:00
Alex Nixon
a21f5d88c1 x86: unify x86_32 and x86_64 play_dead into one function
Add the new play_dead into smpboot.c, as it fits more cleanly in there
alongside other CONFIG_HOTPLUG functions.

Separate out the common code into its own function.

Signed-off-by: Alex Nixon <alex.nixon@citrix.com>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-25 10:59:19 +02:00
Alex Nixon
3790025863 x86_32: clean up play_dead
The removal of the CPU from the various maps was redundant as it already
happened in cpu_disable.

After cleaning this up, cpu_uninit only resets the tlb state, so rename
it and create a noop version for the X86_64 case (so the two play_deads
can be unified later).

Signed-off-by: Alex Nixon <alex.nixon@citrix.com>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-25 10:59:18 +02:00
Alex Nixon
93be71b672 x86: add cpu hotplug hooks into smp_ops
Signed-off-by: Alex Nixon <alex.nixon@citrix.com>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-25 10:59:18 +02:00
Mark Langsdorf
394a15051c x86: invalidate caches before going into suspend
When a CPU core is shut down, all of its caches need to be flushed
to prevent stale data from causing errors if the core is resumed.
Current Linux suspend code performs an assignment after the flush,
which can add dirty data back to the cache.  On some AMD platforms,
additional speculative reads have caused crashes on resume because
of this dirty data.

Relocate the cache flush to be the very last thing done before
halting.  Tie into an assembly line so the compile will not
reorder it.  Add some documentation explaining what is going
on and why we're doing this.

Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com>
Acked-by: Mark Borden <mark.borden@amd.com>
Acked-by: Michael Hohmuth <michael.hohmuth@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-15 14:04:30 +02:00
Ingo Molnar
8d7ccaa545 Merge commit 'v2.6.27-rc3' into x86/prototypes
Conflicts:

	include/asm-x86/dma-mapping.h

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-14 12:19:59 +02:00
Ingo Molnar
0e2f65ee30 Merge branch 'linus' into x86/pebs
Conflicts:

	arch/x86/Kconfig.cpu
	arch/x86/kernel/cpu/intel.c
	arch/x86/kernel/setup_64.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-25 11:37:07 +02:00
Jaswinder Singh
fb26132b44 x86: process_32.c declare cpu_number before they get used
Moved DECLARE_PER_CPU(int, cpu_number) from CONFIG_X86_32_SMP to CONFIG_X86_32
because cpu_number is required for both.
And include asm/smp.h in process_32.c

Signed-off-by: Jaswinder Singh <jaswinder@infradead.org>
2008-07-22 14:35:59 +02:00
Jaswinder Singh
bbc1f698a5 x86: Introducing asm/syscalls.h
Declaring arch-dependent syscalls for x86 architecture

Signed-off-by: Jaswinder Singh <jaswinder@infradead.org>
2008-07-22 14:35:57 +02:00
Ingo Molnar
9b610fda0d Merge branch 'linus' into timers/nohz 2008-07-18 19:53:16 +02:00
Thomas Gleixner
b8f8c3cf0a nohz: prevent tick stop outside of the idle loop
Jack Ren and Eric Miao tracked down the following long standing
problem in the NOHZ code:

	scheduler switch to idle task
	enable interrupts

Window starts here

	----> interrupt happens (does not set NEED_RESCHED)
	      	irq_exit() stops the tick

	----> interrupt happens (does set NEED_RESCHED)

	return from schedule()
	
	cpu_idle(): preempt_disable();

Window ends here

The interrupts can happen at any point inside the race window. The
first interrupt stops the tick, the second one causes the scheduler to
rerun and switch away from idle again and we end up with the tick
disabled.

The fact that it needs two interrupts where the first one does not set
NEED_RESCHED and the second one does made the bug obscure and extremly
hard to reproduce and analyse. Kudos to Jack and Eric.

Solution: Limit the NOHZ functionality to the idle loop to make sure
that we can not run into such a situation ever again.

cpu_idle()
{
	preempt_disable();

	while(1) {
		 tick_nohz_stop_sched_tick(1); <- tell NOHZ code that we
		 			          are in the idle loop

		 while (!need_resched())
		       halt();

		 tick_nohz_restart_sched_tick(); <- disables NOHZ mode
		 preempt_enable_no_resched();
		 schedule();
		 preempt_disable();
	}
}

In hindsight we should have done this forever, but ... 

/me grabs a large brown paperbag.

Debugged-by: Jack Ren <jack.ren@marvell.com>, 
Debugged-by: eric miao <eric.y.miao@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-07-18 18:10:28 +02:00
Ingo Molnar
5806b81ac1 Merge branch 'auto-ftrace-next' into tracing/for-linus
Conflicts:

	arch/x86/kernel/entry_32.S
	arch/x86/kernel/process_32.c
	arch/x86/kernel/process_64.c
	arch/x86/lib/Makefile
	include/asm-x86/irqflags.h
	kernel/Makefile
	kernel/sched.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-14 16:11:52 +02:00
Glauber Costa
1481a3dd42 x86: move cpu_exit_clear to process_32.c
Take it out of smpboot.c, and move it to process_32.c, closer
to its only user.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 12:48:24 +02:00
Ingo Molnar
93022136ff Merge commit 'v2.6.26-rc9' into x86/cpu 2008-07-08 07:47:47 +02:00