Commit graph

36 commits

Author SHA1 Message Date
Jens Osterkamp
9176c0b1f5 [POWERPC] move celleb DABRX definitions
This moves the private DABRX definitions for celleb from beat.h to
reg.h to make them usable for all.

Signed-off-by: Jens Osterkamp <jens@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2008-03-03 08:03:14 +01:00
Andy Fleming
39aef685af [POWERPC] Made FSL Book-E PMC support more generic
Some of the more recent e300 cores have the same performance monitor
implementation as the e500.  e300 isn't book-e, so the name isn't
really appropriate.  In preparation for e300 support, rename a bunch
of fsl_booke things to say fsl_emb (Freescale Embedded Performance Monitors).

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-05 23:34:14 -06:00
Geoff Levand
cda563fb9c [POWERPC] Add definition of Cell bookmark SPR
Add a definition for the Cell bookmark SPR to asm-powerpc/regs.h.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25 22:52:51 +11:00
Michael Neuling
584f8b71a2 [POWERPC] Use SLB size from the device tree
Currently we hardwire the number of SLBs to 64, but PAPR says we
should use the ibm,slb-size property to obtain the number of SLB
entries.  This uses this property instead of assuming 64.  If no
property is found, we assume 64 entries as before.

This soft patches the SLB handler, so it shouldn't change performance
at all.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11 13:45:56 +11:00
Adrian Bunk
e6b6e3ffb9 [POWERPC] Remove APUS support from arch/ppc
Current status of APUS:
- arch/powerpc/: removed in 2.6.23
- arch/ppc/: marked BROKEN since 2 years

This therefore removes the remaining parts of APUS support from
arch/ppc, include/asm-ppc, arch/powerpc and include/asm-powerpc.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-17 15:15:04 +10:00
Olof Johansson
2e1957fd47 [POWERPC] pasemi: Export more SPRs to sysfs when CONFIG_DEBUG_KERNEL=y
Export some of the implementation-specific registers via sysfs.
Useful when debugging, etc.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:21 +10:00
will schmidt
078f194045 [POWERPC] Oprofile enhanced instruction sampling support
Oprofile enhanced instruction sampling support.

When performing instruction sampling, the mmcra[SLOT] field can be used to
more accurately identify the address of the sampled instruction.

Tested on power4, js20, power5 and power5+.

Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com>
cc: Maynard Johnson <maynardj@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-10 21:55:48 +10:00
Olof Johansson
25fc530eed [POWERPC] pasemi: PA6T oprofile support
Oprofile support for PA6T, kernel side.

Also rename the PA6T_SPRN.* defines to SPRN_PA6T.*.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 21:31:51 +10:00
Olof Johansson
c388cfebbf [POWERPC] pasemi: SMP timebase sync
Timebase update is simple on PA6T, since global updates can be done from
one core by writing to an SPR.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:22 +11:00
Olof Johansson
1199919b69 [POWERPC] pasemi: Idle loops
Powersave support on PA6T. Right now it only uses 'doze' mode, and
will default to no savings (spin).

Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:22 +11:00
Olof Johansson
6529c13dfe [POWERPC] PA6T PMC support
Support for PA6T-style PMC registers.

PMCs are completely implementation-dependent on PPC, and PA6T numbers them
differently from the IBM model.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:19 +11:00
Anton Blanchard
f050982a9b [POWERPC] Add SPURR SPR to sysfs
Now we have a SPURR cpu feature bit, we can export it to userspace in
sysfs.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-09 11:39:06 +11:00
Anton Blanchard
4c198557c6 [POWERPC] Add DSCR SPR to sysfs
POWER6 adds a new SPR, the data stream control register (DSCR). It can
be used to adjust how agressive the prefetch mechanisms are.

Its possible we may want to context switch this, but for now just export
it to userspace via sysfs so we can adjust it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-09 11:39:05 +11:00
Benjamin Herrenschmidt
859deea949 [POWERPC] Cell timebase bug workaround
The Cell CPU timebase has an erratum. When reading the entire 64 bits
of the timebase with one mftb instruction, there is a handful of cycles
window during which one might read a value with the low order 32 bits
already reset to 0x00000000 but the high order bits not yet incremeted
by one. This fixes it by reading the timebase again until the low order
32 bits is no longer 0. That might introduce occasional latencies if
hitting mftb just at the wrong time, but no more than 70ns on a cell
blade, and that was considered acceptable.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-25 11:54:18 +10:00
Jake Moilanen
362ff7b2ac [POWERPC] Add 970GX cputable entry
970GX cputable entry from Steve Winiecki.

Signed-off-by: Jake Moilanen <moilanen@austin.ibm.com>

 arch/powerpc/kernel/cputable.c          |   15 +++++++++++++++
 arch/powerpc/oprofile/op_model_power4.c |    2 +-
 include/asm-powerpc/reg.h               |    1 +
 3 files changed, 17 insertions(+), 1 deletion(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-23 18:23:17 +10:00
Anton Blanchard
52aed7cd52 [POWERPC] Update MTFSF_L() comment
David Woodhouse points out that the comment accompanying the MTFSF_L
macro is misleading. We should make it clear that the L bit is ignored
on older CPUS, not the entire instruction.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-06 21:10:41 +10:00
Olof Johansson
b3ebd1d862 [POWERPC] powerpc: PA6T cputable entry, PVR value
Introduce PWRficient PA6T cputable entries and feature bits.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-13 18:39:52 +10:00
Benjamin Herrenschmidt
acf7d76827 [POWERPC] cell: add RAS support
This is a first version of support for the Cell BE "Reliability,
Availability and Serviceability" features.

It doesn't yet handle some of the RAS interrupts (the ones described in
iic_is/iic_irr), I'm still working on a proper way to expose these. They
are essentially a cascaded controller by themselves (sic !) though I may
just handle them locally to the iic driver. I need also to sync with
David Erb on the way he hooked in the performance monitor interrupt.

So that's all for 2.6.17 and I'll do more work on that with my rework of
the powerpc interrupt layer that I'm hacking on at the moment.

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21 15:01:29 +10:00
Anton Blanchard
9e6e3c2c79 [POWERPC] Fix HV bit handling on non partitioned machines
On non partitioned machines we currently set the HV bit in kernel space
only. It turns out we are supposed to maintain the HV bit in both user
and kernel space.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-15 19:31:26 +10:00
Anton Blanchard
3a2c48cfc9 [POWERPC] 64bit FPSCR support
Forthcoming machines will extend the FPSCR to 64 bits.  We already
had a 64-bit save area for the FPSCR, but we need to use a new form
of the mtfsf instruction.  Fortunately this new form is decoded as
an ordinary mtfsf by existing 64-bit processors.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-15 19:31:25 +10:00
Michael Neuling
e78dbc800c [PATCH] powerpc: oprofile support for POWER6
POWER6 moves some of the MMCRA bits and also requires some bits to be
cleared each PMU interrupt.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-09 21:24:05 +10:00
Michael Neuling
d6b89a196d [PATCH] powerpc: whitespace cleanup in reg.h
In reg.h we mostly have #define<space> but there are a few #define<tab>
around.  Clean these up so we use space exclusively.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-19 14:35:25 +10:00
Paul Mackerras
a0652fc9a2 powerpc: Unify the 32 and 64 bit idle loops
This unifies the 32-bit (ARCH=ppc and ARCH=powerpc) and 64-bit idle
loops.  It brings over the concept of having a ppc_md.power_save
function from 32-bit to ARCH=powerpc, which lets us get rid of
native_idle().  With this we will also be able to simplify the idle
handling for pSeries and cell.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-27 15:03:03 +11:00
Anton Blanchard
cb2c9b2741 [PATCH] powerpc: Fix runlatch performance issues
The runlatch SPR can take a lot of time to write. My original runlatch
code would set it on every exception entry even though most of the time
this was not required. It would also continually set it in the idle
loop, which is an issue on an SMT capable processor.

Now we cache the runlatch value in a threadinfo bit, and only check for
it in decrementer and hardware interrupt exceptions as well as the idle
loop. Boot on POWER3, POWER5 and iseries, and compile tested on pmac32.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-24 11:36:31 +11:00
Arnd Bergmann
c902be71dc [PATCH] cell: enable pause(0) in cpu_idle
This patch enables support for pause(0) power management state
for the Cell Broadband Processor, which is import for power efficient
operation. The pervasive infrastructure will in the future enable
us to introduce more functionality specific to the Cell's
pervasive unit.

From: Maximino Aguilar <maguilar@us.ibm.com>
Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 15:44:32 +11:00
Andy Fleming
555d97ac87 [PATCH] powerpc: G4+ oprofile support
This patch adds oprofile support for the 7450 and all its multitudinous
derivatives.

* Added 7450 (and derivatives) support for oprofile
* Changed e500 cputable to have oprofile model and cpu_type fields
* Added support for classic 32-bit performance monitor interrupt
* Cleaned up common powerpc oprofile code to be as common as possible
* Cleaned up oprofile_impl.h to reflect 32 bit classic code
* Added 32-bit MMCRx bitfield definitions and SPR numbers

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 15:06:03 +11:00
Paul Mackerras
799d6046d3 [PATCH] powerpc: merge code values for identifying platforms
This patch merges platform codes.  systemcfg->platform is no longer used,
systemcfg use in general is deprecated as much as possible (and renamed
_systemcfg before it gets completely moved elsewhere in a future patch),
_machine is now used on ppc64 along as ppc32.  Platform codes aren't gone
yet but we are getting a step closer. A bunch of asm code in head[_64].S
is also turned into C code.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 13:37:51 +11:00
David Gibson
26ef5c0957 [PATCH] powerpc: Merge cacheflush.h and cache.h
The ppc32 and ppc64 versions of cacheflush.h were almost identical.
The two versions of cache.h are fairly similar, except for a bunch of
register definitions in the ppc32 version which probably belong better
elsewhere.  This patch, therefore, merges both headers.  Notable
points:
	- there are several functions in cacheflush.h which exist only
on ppc32 or only on ppc64.  These are handled by #ifdef for now, but
these should probably be consolidated, along with the actual code
behind them later.
	- Confusingly, both ppc32 and ppc64 have a
flush_dcache_range(), but they're subtly different: it uses dcbf on
ppc32 and dcbst on ppc64, ppc64 has a flush_inval_dcache_range() which
uses dcbf.  These too should be merged and consolidated later.
	- Also flush_dcache_range() was defined in cacheflush.h on
ppc64, and in cache.h on ppc32.  In the merged version it's in
cacheflush.h
	- On ppc32 flush_icache_range() is a normal function from
misc.S.  On ppc64, it was wrapper, testing a feature bit before
calling __flush_icache_range() which does the actual flush.  This
patch takes the ppc64 approach, which amounts to no change on ppc32,
since CPU_FTR_COHERENT_ICACHE will never be set there, but does mean
renaming flush_icache_range() to __flush_icache_range() in
arch/ppc/kernel/misc.S and arch/powerpc/kernel/misc_32.S
	- The PReP register info from asm-ppc/cache.h has moved to
arch/ppc/platforms/prep_setup.c
	- The 8xx register info from asm-ppc/cache.h has moved to a
new asm-powerpc/reg_8xx.h, included from reg.h
	- flush_dcache_all() was defined on ppc32 (only), but was
never called (although it was exported).  Thus this patch removes it
from cacheflush.h and from ARCH=powerpc (misc_32.S) entirely.  It's
left in ARCH=ppc for now, with the prototype moved to ppc_ksyms.c.

Built for Walnut (ARCH=ppc), 32-bit multiplatform (pmac, CHRP and PReP
ARCH=ppc, pmac and CHRP ARCH=powerpc).  Built and booted on POWER5
LPAR (ARCH=powerpc and ARCH=ppc64).

Built for 32-bit powermac (ARCH=ppc and ARCH=powerpc).  Built and
booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64).  Built and booted
on G5 (ARCH=powerpc)

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 13:09:22 +11:00
Benjamin Herrenschmidt
4350147a81 [PATCH] ppc64: SMU based macs cpufreq support
CPU freq support using 970FX powertune facility for iMac G5 and SMU
based single CPU desktop.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 11:17:34 +11:00
Paul Mackerras
f78541dcec powerpc: Merge xmon
The merged version follows the ppc64 version pretty closely mostly,
and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version.
The main difference for ppc64 is that the 'p' command to call
show_state (which was always pretty dodgy) has been replaced by
the ppc32 'p' command, which calls a given procedure (so in fact
the old 'p' command behaviour can be achieved with 'p $show_state').

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 22:53:37 +10:00
Paul Mackerras
c032524f0d powerpc: Make single-stepping emulation (mostly) usable on 32-bit
The sc instruction emulation can't be done the same way on 32-bit
as 64-bit yet, but this should work OK.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 22:48:08 +10:00
Michael Ellerman
a6f3546ecd [PATCH] powerpc: Remove duplicate definition of set_tb()
Somewhere along the line we got two definitions of set_tb(). They look to
be identical although they're not textually identical. So remove the #ifdef
CONFIG_PPC64 version, leaving the common version in time.h.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 16:00:09 +10:00
Paul Mackerras
fd582ec88e ppc: Various minor compile fixes
This fixes up a variety of minor problems in compiling with ARCH=ppc
arising from using the merged versions of various header files.
A lot of the changes are just adding #include <asm/machdep.h> to
files that use ppc_md or smp_ops_t.

This also arranges for us to use semaphore.c, vecemu.c, vector.S and
fpu.S from arch/powerpc/kernel when compiling with ARCH=ppc.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-11 22:08:12 +10:00
Paul Mackerras
9f04b9e327 powerpc: Merged processor.h.
This adds register definitions from the ppc64 processor.h to reg.h,
and makes a single merged processor.h.  I moved __is_processor from
the ppc64 system.h to the merged reg.h along with the PVR register
constants.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 14:19:43 +10:00
Stephen Rothwell
bbeb3f4c55 powerpc: clean up after powermac build merge
Complete moving arch/ppc64/kernel/mpic.h,
        include/asm-ppc/reg.h, include/asm-ppc64/kdebug.h
	        and include/asm-ppc64/kprobes.h
Add arch/powerpc/platforms/Makefile and use it from
	arch/powerpc/Makefile
Introduce OLDARCH temporarily so we can point back to
	the originating architecture

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-27 13:51:59 +10:00
Paul Mackerras
14cf11af6c powerpc: Merge enough to start building in arch/powerpc.
This creates the directory structure under arch/powerpc and a bunch
of Kconfig files.  It does a first-cut merge of arch/powerpc/mm,
arch/powerpc/lib and arch/powerpc/platforms/powermac.  This is enough
to build a 32-bit powermac kernel with ARCH=powerpc.

For now we are getting some unmerged files from arch/ppc/kernel and
arch/ppc/syslib, or arch/ppc64/kernel.  This makes some minor changes
to files in those directories and files outside arch/powerpc.

The boot directory is still not merged.  That's going to be interesting.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 16:04:21 +10:00