Commit graph

241 commits

Author SHA1 Message Date
Michael Roth
c57c0a2a0d Input: ads7846 - pin change interrupt support
Some SoCs support only pin change interrupts on GPIO pins used as irq
lines.

The ads7846 core is not affected from the additional irqs on the rising
edge because the code accounts touch bounce anyway by kicking in a timer
and disabling the irq after the first request and reenabling the irq after
a timeout when there is no longer pen down detected.

Signed-off-by: Michael Roth <mroth@nessie.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-11 02:07:25 -07:00
Wan ZongShun
7e3f73754e Input: add support for touchscreen on W90P910 ARM platform
The touchscreen works in two modes, wait trigger mode and auto-semi
mode. The device starts in wait trigger mode and waits until pressure
is detected, then device sets WT_INT bit and raises an interrupt.
The driver should put the device into auto-semi mode and prepare for
reading first X and then Y coordinates. When coordinate data is ready
the driver sets ADC_INT bit and raises interrupt again.

[dtor@mail.ru: various cleanups]
Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-11 02:03:39 -07:00
Dmitry Torokhov
4894e4aca8 Merge commit 'v2.6.30' into next 2009-06-11 01:58:01 -07:00
Manuel Traut
346a850e3c Input: usb1400_ts - fix access to "device data" in resume function
platform_data != driver_data

driver data is actually the "correct" place of the struct however it is
not placed there due to the need of the ac97 struct. This is broken since
d9105c2b01 aka "[ARM] 5184/1: Split ucb1400_ts into core and touchscreen"

Signed-off-by: Manuel Traut <manut@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-27 06:24:41 -07:00
Daniel Mack
10494dce0b Input: add driver for EETI touchpanels
This patch adds a driver for EETI's I2C connected touchscreens.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Tested-by: Sven Neumann <s.neumann@raumfeld.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-19 19:25:35 -07:00
Michael Roth
b58895f8b1 Input: ads7846 - more detailed model name in sysfs
Signed-off-by: Michael Roth <mroth@nessie.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-19 19:25:27 -07:00
Michael Roth
86579a4ccc Input: ads7846 - support swapping x and y axes
Signed-off-by: Michael Roth <mroth@nessie.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-19 19:24:54 -07:00
Kwangwoo Lee
78f7f36711 Input: tsc2007 - make sure platform provides get_pendown_state()
The platform codes must provide get_pendown_state() for the driver
to work properly.

Signed-off-by: Kwangwoo Lee <kwangwoo.lee@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-15 19:23:54 -07:00
Thierry Reding
705a76d2d2 Input: tsc2007 - fix locking in hrtimer handler
Now that hrtimers are always running in hard irq context we can't
unconditionally enable interrupts at the end of the timer function.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Kwangwoo Lee <kwangwoo.lee@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-11 15:35:48 -07:00
Dmitry Torokhov
d585a021c0 Merge commit 'v2.6.30-rc5' into next 2009-05-08 18:29:27 -07:00
Greg Kroah-Hartman
84e5b0d00f Input: wm97xx - do not access dev->driver_data directly
In the near future, the driver core is going to not allow direct access
to the driver_data pointer in struct device.  Instead, the functions
dev_get_drvdata() and dev_set_drvdata() should be used.  These functions
have been around since the beginning, so are backwards compatible with
all older kernel versions.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-01 06:49:15 -07:00
Hans-Christian Egtvedt
864fe73c31 Input: add wm97xx accelerated driver for Atmel microprocessors
This patch adds an accelerated driver for Atmel AVR32 AT32AP700X
microprocessors. It uses interrupts on the channel B in the AC97
controller. Thus, offloading the work queue in the wm97xx-ts driver.

The driver has been tested with Atmel AVR32 AT32AP7000 and Wolfson
WM9712 codec.

The driver can also be easily modified to support Atmel AT91 devices, as
AT91 and AVR32 share the same AC97C module.

[Fixed leak of atmel_wm97xx when probe fails. -- broonie]
[dtor@mail.ru: do not report ABS_PRESSURE events when not measuring pressure]
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-18 19:13:34 -07:00
Ben Nizette
3deb649e65 Input: ucb1400 - use disable_irq_nosync() in irq handler
disable_irq() waits for all running handlers to complete before
returning.  As such, if it's used to disable an interrupt from
that interrupt's handler it will deadlock.  This replaces the
dangerous instances with the _nosync() variant which doesn't have
this problem.

Signed-off-by: Ben Nizette <bn@niasdigital.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-17 20:42:06 -07:00
Ben Nizette
29fa98bd9b Input: tsc2007 - use disable_irq_nosync() in irq handler
disable_irq() waits for all running handlers to complete before
returning.  As such, if it's used to disable an interrupt from
that interrupt's handler it will deadlock.  This replaces the
dangerous instances with the _nosync() variant which doesn't have
this problem.

Signed-off-by: Ben Nizette <bn@niasdigital.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-17 20:42:00 -07:00
Dmitry Torokhov
0c387ec88a Merge branch 'next' into for-linus 2009-04-16 08:51:52 -07:00
Ben Nizette
3f3e7c6e13 Input: ads7846 - fix unsafe disable_irq
The use of disable_irq inside the handler for the interrupt being
disabled has always been dangerous.  disable_irq should wait for that
handler to complete before returning -> deadlock.

For some reason this wasn't actually the case until 3aa551c9b was merged
but since this time, the ads7846 driver has deadlocked the system on
first interrupt.

Convert the driver to use the handler-safe _nosync variant.

Signed-off-by: Ben Nizette <bn@niasdigital.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-15 19:02:46 -07:00
Jiri Slaby
180deb5088 Input: mainstone-wm97xx - fix condition in pen_up
The loop body was never executed, because the condition is
always false. Convert to for with more obvious condition.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-15 09:04:10 -07:00
Michael Hennerich
0bc69ce692 Input: ad7877, ad7879 - remove depreciated IRQF_SAMPLE_RANDOM flag
This patch removes depreciated IRQF_SAMPLE_RANDOM flags from
ad7877 and ad7879 touchscreen drivers.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-15 08:58:22 -07:00
Eric Miao
7f6d5ff22b Input: da9034-ts - make pen {down,up} events more reliable
PEN_{UP/DOWN} events are expected to be available soon after stopping
TSI auto measurement, but this is found not always be true. Work around
this by adding delay and simulating such an event (according to pen down
status bit).

Signed-off-by: Bin Yang <bin.yang@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-15 08:58:22 -07:00
Eric Miao
93ff27c66d Input: da9034-ts - add Bin Yang as co-author of the driver
Bin did a lot of work on this driver, without his help, this driver
will not be possible.

Signed-off-by: Bin Yang <bin.yang@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-15 08:58:21 -07:00
Mark Brown
4f295232be Input: wm97xx - don't specify IRQF_SAMPLE_RANDOM
The input core will add entropy to the pool so this flag is not
needed.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-11 17:09:15 -07:00
Eric Miao
fd746d540a Input: ads7846 - introduce platform specific way to synchronize sampling
Noises can be introduced when LCD signals are being driven, some platforms
provide a signal to assist the synchronization of this sampling procedure.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-11 17:09:15 -07:00
Dmitry Torokhov
ba28f22e7c Merge branch 'next' into for-linus 2009-04-08 00:00:33 -07:00
Linus Torvalds
45e36c1666 Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (23 commits)
  sh: sh7785lcr: Map whole PCI address space.
  sh: Fix up DSP context save/restore.
  sh: Fix up number of on-chip DMA channels on SH7091.
  sh: update defconfigs.
  sh: Kill off broken direct-mapped cache mode.
  sh: Wire up ARCH_HAS_DEFAULT_IDLE for cpuidle.
  sh: Add a command line option for disabling I/O trapping.
  sh: Select ARCH_HIBERNATION_POSSIBLE.
  sh: migor: Fix up CEU use flags.
  input: migor_ts: add wakeup support
  rtc: rtc-sh: use set_irq_wake()
  input: sh_keysc: use enable/disable_irq_wake()
  sh: intc: set_irq_wake() support
  sh: intc: install enable, disable and shutdown callbacks
  clocksource: sh_cmt: use remove_irq() and remove clockevent workaround
  sh: ap325 and Migo-R use new sh_mobile_ceu_info flags
  sh: Fix up -Wformat-security whining.
  sh: ap325rxa: Add ov772x support, again.
  sh: Sanitize asm/mmu.h for assembly use.
  sh: Tidy up sh7786 pinmux table.
  ...
2009-04-05 11:15:54 -07:00
Magnus Damm
0935ade0bf input: migor_ts: add wakeup support
Add wakeup support to the migor_ts driver. If user space has enabled
wakeup, use set_irq_wake() during suspend and resume. With this patch
the migor_ts driver can be used to wake the system from suspend.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-02 11:21:40 +09:00
Adam Buchbinder
b731d7b6a7 trivial: Fix misspelling of "Celsius".
A few comments say "Celcius"; this fixes them. No code changes.

Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-30 15:22:03 +02:00
Russell King
97fb44eb6b Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel
Conflicts:

	arch/arm/mach-at91/gpio.c
2009-03-13 21:44:51 +00:00
Michael Hennerich
b4be468cc1 Input: add AD7879 Touchscreen driver
[randy.dunlap@oracle.com: don't use bus_id]
[dtor@mail.ru: locking and other fixups]
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-03-09 20:14:10 -07:00
Michael Hennerich
331b78ed30 Input: add AD7877 touchscreen driver
[dtor@mail.ru: locking and other fixups]
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-03-09 20:13:32 -07:00
Eric Miao
5bf3df3f00 [ARM] pxa: separate definitions from pxa-regs.h and remove it finally
The remaining registers are separated into:

   - <mach/regs-ost.h>
   - <mach/regs-rtc.h>
   - <mach/regs-intc.h>

and then we can remove pxa-regs.h completely. Instead of #include this
file, let's:

1. include the specific <mach/regs-*.h> with care (if that's absolutely
   necessary)

2. define the registers in the driver, make cleanly defined API to expose
   the register access to external with sufficient reason

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09 21:22:40 +08:00
Mark Brown
22e39d344f Input: add accelerated touchscreen support for Marvell Zylonite
This patch implements accelerated touchscreen support for the Marvell
Zylonite development platform, supporting pen down interrupts and
continuous mode data transfers.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-03-08 16:35:26 -07:00
Mike Rapoport
cd2d64b1a0 Input: ucb1400_ts, mainstone-wm97xx - add BTN_TOUCH events
Add BTN_TOUCH event reporting to ucb1400_ts and accelerated mainstone-wm97xx
touchscreen drivers. Together with previously posted similar patch for
wm97xx-core this will make all touchscreen drivers behave consistently wrt.
BTN_TOUCH.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-03-08 16:35:17 -07:00
Mark Brown
a700e72dd0 Input: wm97xx - use disable_irq_nosync() for Mainstone
This should make no practical difference since the Mainstone can't be
SMP but it is more correct.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-03-08 16:35:10 -07:00
Mike Rapoport
65db86ac07 Input: wm97xx - add BTN_TOUCH event to wm97xx to use it with Android
Android expects BTN_TOUCH events when pen state changes. Add BTN_TOUCH
event reporting to allow use of wm97xx touchscreen controller wiht
Android devices.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-03-08 16:35:02 -07:00
Linus Torvalds
6b3bf20491 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elantech - touchpad driver miss-recognising logitech mice
  Input: synaptics - ensure we reset the device on resume
  Input: usbtouchscreen - fix eGalax HID ignoring
  Input: ambakmi - fix timeout handling in amba_kmi_write()
  Input: pxa930_trkball - fix write timeout handling
  Input: struct device - replace bus_id with dev_name(), dev_set_name()
  Input: bf54x-keys - fix debounce time validation
  Input: spitzkbd - mark probe function as __devinit
  Input: omap-keypad - mark probe function as __devinit
  Input: corgi_ts - mark probe function as __devinit
  Input: corgikbd - mark probe function as __devinit
  Input: uvc - the button on the camera is KEY_CAMERA
  Input: psmouse - make MOUSE_PS2_LIFEBOOK depend on X86
  Input: atkbd - make forced_release_keys[] static
  Input: usbtouchscreen - allow reporting calibrated data
2009-03-02 15:43:03 -08:00
Daniel Ritz
139ebe8dc8 Input: usbtouchscreen - fix eGalax HID ignoring
Commit ec42d4481e broke usbtouchscreen for
some eGalax/EETI devices that claim to be HID, but are not.

Devices confirmed to be real HID have the class set to HID and the protocol
set to 'mouse'.  Some have HID class but protocol set to 'none'. Those are
not HID and should be driven by usbtouchscreen.

Fix the device ignoring macro by adding match for the protocol too.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-02-28 14:01:25 -08:00
Kay Sievers
4e8718a1f9 Input: struct device - replace bus_id with dev_name(), dev_set_name()
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-01-29 23:00:44 -08:00
Uwe Kleine-König
840207edfa Input: corgi_ts - mark probe function as __devinit
A pointer to corgits_probe is passed to the core via
platform_driver_register and so the function must not disappear when the
.init sections are discarded.  Otherwise (if also having HOTPLUG=y)
unbinding and binding a device to the driver via sysfs will result in an
oops as does a device being registered late.

An alternative to this patch is using platform_driver_probe instead of
platform_driver_register plus removing the pointer to the probe function
from the struct platform_driver.

[dtor@mail.ru: fixed some more section markups]
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-01-12 22:32:50 -08:00
Dan Streetman
c9cbf3d3b3 Input: usbtouchscreen - allow reporting calibrated data
This patch adds a module parameter to report either the raw
coordinate data or the hardware-calibrated coordinate data for
MicroTouch/3M touchscreens.  The default is set to the raw
coordinates for backwards compatibilty.

Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-01-10 23:45:51 -08:00
Alan Cox
30aafdba6f touchscreen: Fix build of da9034
Missing an include and thus breaks the x86-64 build.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 11:34:14 -08:00
Linus Torvalds
db30c70575 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (29 commits)
  Input: i8042 - add Dell Vostro 1510 to nomux list
  Input: gtco - use USB endpoint API
  Input: add support for Maple controller as a joystick
  Input: atkbd - broaden the Dell DMI signatures
  Input: HIL drivers - add MODULE_ALIAS()
  Input: map_to_7segment.h - convert to __inline__ for userspace
  Input: add support for enhanced rotary controller on pxa930 and pxa935
  Input: add support for trackball on pxa930 and pxa935
  Input: add da9034 touchscreen support
  Input: ads7846 - strict_strtoul takes unsigned long
  Input: make some variables and functions static
  Input: add tsc2007 based touchscreen driver
  Input: psmouse - add module parameters to control OLPC touchpad delays
  Input: i8042 - add Gigabyte M912 netbook to noloop exception table
  Input: atkbd - Samsung NC10 key repeat fix
  Input: atkbd - add keyboard quirk for HP Pavilion ZV6100 laptop
  Input: libps2 - handle 0xfc responses from devices
  Input: add support for Wacom W8001 penabled serial touchscreen
  Input: synaptics - report multi-taps only if supported by the device
  Input: add joystick driver for Walkera WK-0701 RC transmitter
  ...
2009-01-06 17:14:01 -08:00
Linus Torvalds
14a3c4ab0e Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (407 commits)
  [ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices
  [ARM] pxafb: cleanup of the timing checking code
  [ARM] pxafb: cleanup of the color format manipulation code
  [ARM] pxafb: add palette format support for LCCR4_PAL_FOR_3
  [ARM] pxafb: add support for FBIOPAN_DISPLAY by dma braching
  [ARM] pxafb: allow pxafb_set_par() to start from arbitrary yoffset
  [ARM] pxafb: allow video memory size to be configurable
  [ARM] pxa: add document on the MFP design and how to use it
  [ARM] sa1100_wdt: don't assume CLOCK_TICK_RATE to be a constant
  [ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant
  [ARM] pxa/tavorevb: update board support (smartpanel LCD + keypad)
  [ARM] pxa: Update eseries defconfig
  [ARM] 5352/1: add w90p910-plat config file
  [ARM] s3c: S3C options should depend on PLAT_S3C
  [ARM] mv78xx0: implement GPIO and GPIO interrupt support
  [ARM] Kirkwood: implement GPIO and GPIO interrupt support
  [ARM] Orion: share GPIO IRQ handling code
  [ARM] Orion: share GPIO handling code
  [ARM] s3c: define __io using the typesafe version
  [ARM] S3C64XX: Ensure CPU_V6 is selected
  ...
2008-12-30 17:36:49 -08:00
Ingo Molnar
32e8d18683 Merge branches 'timers/clocksource', 'timers/hpet', 'timers/hrtimers', 'timers/nohz', 'timers/ntp', 'timers/posixtimers' and 'timers/rtc' into timers/core 2008-12-25 18:02:25 +01:00
Eric Miao
9bcc00b96f Input: add da9034 touchscreen support
Add support for the built-in touchscreen controller in DA9034
(aka Micco), usually found on platforms with xscale processors.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-12-23 04:36:50 -05:00
Harvey Harrison
3a0c58ddcd Input: ads7846 - strict_strtoul takes unsigned long
Fix sparse warning introduced by:
commit 160f1fef7e Input: convert drivers to use strict_strtoul()

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-12-23 04:36:44 -05:00
Kwangwoo Lee
50b6f1f4a4 Input: add tsc2007 based touchscreen driver
This drive has been tested on ARM9 based SoC - MV86XX.

Signed-off-by: Kwangwoo Lee <kwangwoo.lee@gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-12-20 05:00:43 -05:00
Dmitry Torokhov
93b8eef1c0 Merge commit 'v2.6.28-rc9' into next 2008-12-20 04:54:54 -05:00
Russell King
72aaf09fda Merge git://git.marvell.com/orion into devel 2008-12-13 09:12:51 +00:00
Eric Miao
1f017a9964 [ARM] pxa: move AC97 register definitions into dedicated regs-ac97.h
The optimal change would be to move the AC97 register definitions into
the AC97 driver, unfortunately, the registers are shared between several
files. Move them into a dedicated regs-ac97.h first.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02 14:42:39 +08:00
Linus Torvalds
b31a0fecd1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: wacom - add support for new USB Tablet PCs
  Input: replace spin_lock_bh with spin_lock_irqsave in ml_ff_playback
  Input: i8042 - add Compal Hel80 laptop to nomux blacklist
  Input: cm109 - add keymap for ATCom AU-100 phone
  Input: fix the example of an input device driver
  Input: psmouse - fix incorrect validate_byte check in OLPC protocol
  Input: atkbd - cancel delayed work before freeing its structure
  Input: atkbd - add keymap quirk for Inventec Symphony systems
  Input: i8042 - add Dell XPS M1530 to nomux list
  Input: elo - fix format string in elo driver
2008-11-30 11:05:21 -08:00